substation connectors
DESCRIPTION
Substations connectorsTRANSCRIPT
DISTRIBUTION CONNECTORS
SECTION DE
DE-1
DE1
HUBBELL
®
Power Systems
March 2009
ALUMINUM
HAS
SUSPENSIONBOLTED
ALUMINUM
For standard voltage application with all aluminum, ACSR or aluminum alloy conductor.
Material:Body and Keeper—356 T6 aluminum alloyHardware—galvanized steelSocket and Clevis—ductile iron, galva-nizedCotter Pin—#302 stainless steel
NOTE: Recommended torque on U-bolts: 1/2”–480 in. lbs. 5/8”–720 in. lbs.
CATALOGNUMBER
FITTINGCLAMPING
RANGEINCHES (MM)
ULTIMATEBODY
STRENGTHLBS. (KG)
MAX. TAKE-OFF ANGLE DIMENSIONS INCHES (MM)
APPROX.WT. EACHLBS. (KG)TYPE CAT. NO. DEGREES L W H J
HAS62NHAS62SHAS62C
NoneSocketClevis
—SA04CA04
.20-.62
(5.08-15.75)
17,000
(7,711) 30˚
6-3/4
(171.45)
29/32
(23.02)
2-9/32
(57.94)
1/2
(12.70)
1.9
(.86)
3.2
(1.45)
3.5
(1.59)
HAS85NHAS85SHAS85C
NoneSocketClevis
—SA06CA06
.40-.85
(10.16-21.59)
18,000
(8,165) 30˚
7-1/2
(190.50)
15/16
(23.81)
2-9/16
(65.09)
1/2
(12.70)
2.1
(.95)
3.4
(1.54)
3.8
(1.72)
HAS104NHAS104SHAS104C
NoneSocketClevis
—SA10CA10
.50-1.04
(12.70-26.42)
25,000
(11,340) 30˚
8-1/8
(206.38)
1- 5/32
(29.37)
2-3/4
(69.85)
1/2
(12.70)
2.5
(1.13)
3.9
(1.77)
4.2
(1.91)
HAS118NHAS118SHAS118C
NoneSocketClevis
—SA10CA10
.70-1.18
(17.78-29.97)
25,000
(11,340) 22.5˚
8
(203.20)
1-11/32
(34.13)
2-3/4
(69.85)
1/2
(12.70)
2.8
(1.27)
4.2
(1.91)
4.5
(2.04)
HAS139NHAS139SHAS139C
NoneSocketClevis
—SA13CA13
.90-1.39
(22.86-35.31)
25,000
(11,340) 22.5˚
8-7/8
(225.43)
1-17/32
(38.89)
3
(76.20)
1/2
(12.70)
3.2
(1.45)
4.9
(2.22)
5.0
(2.27)
HAS147NHAS147SHAS147C
NoneSocketClevis
—SA13CA13
1.00-1.47
(25.40-37.34)
25,000
(11,340) 22.5˚
9-3/16
(233.36)
1-9/16
(39.69)
3-1/8
(79.38)
1/2
(12.70)
3.5
(1.59)
5.2
(2.36)
5.3
(2.40)
HAS162NHAS162SHAS162C
NoneSocketClevis
—SA13CA13
1.10-1.62
(27.94-41.15)
25,000
(11,340) 22.5˚
9-1/2
(241.30)
1-13/16
(46.04)
3-5/64
(78.18)
1/2
(12.70)
3.8
(1.72)
5.5
(2.49)
5.6
(2.54)
HAS182NHAS182SHAS182C
NoneSocketClevis
—SA16CA16
1.25-1.82
(31.75-46.23)
25,000
(11,340) 25˚
10
(254)
1-15/16
(49.21)
3-11/64
(80.57)
1/2
(12.70)
4.2
(1.91)
6.0
(2.72)
6.2
(2.81)
HAS204NHAS204SHAS204C
NoneSocketClevis
—SA16CA16
1.40-2.04
(35.56-51.82)
25,000
(11,340) 20.5˚
10-1/2
(266.70)
2-11/64
(55.17)
3-17/32
(89.69)
1/2
(12.70)
4.9
(2.22)
6.7
(3.04)
6.9
(3.13)
HAS252N
HAS252S
HAS252C
None
Socket
Clevis
—
SA22
CA22
2.00-2.52
(50.80-64.01)
30,000
(13,608)
30,000
(13,608)
25,000
(11,340)
17.5˚
12
(304.80)
2-11/16
(68.26)
4-1/4
(107.95)
5/8
(15.88)
9.0
(4.08)
10.8
(4.90)
11.3
(5.13)
DISTRIBUTION CONNECTORS
SECTION DE
DE-2
DE2
HUBBELL
®
Power Systems
March 2009
ALUMINUM
TSC
SUSPENSIONTRUNNION
BOLTEDALUMINUM
For standard voltage applications with all aluminum, ACSR or aluminum alloy conductor.
Designed for use on tangent suspension spans with horizontal or vertical post insulators.
Keeper is reversible for proper fit on different size conductors.
Material:Body and Keeper—356-T6 aluminum alloyHardware—Galvanized steelAnti-static spring 302 stainless steel
NOTES:(1) Recommended torque on bolts: 1/2”–300 in. lbs.(2) Anti-static spring can be supplied by adding “ARIV” to catalog number. Example, TSC57ARIV.
CATALOGNUMBER
FIG.NO.
CLAMPINGRANGE
INCHES (MM)
ULTIMATEBODY
STRENGTHLBS. (KG)
DIMENSIONS INCHES (MM)APPROX.WT. EACHLBS. (KG)L W J
TSC57
1
.25-.57
(6.3-14.4)
2,800
(1,270)
5-1/4
(133.3)
3-7/8
(98.4)
1/2
(12.7)
.42
(.19)
TSC86
1
.35-.86
(8.8-21.8)
2,800
(1,270)
5-1/4
(133.3)
3-7/8
(98.4)
1/2
(12.7)
.45
(.20)
TSC106
1
.50-1.06
(12.7-26.9)
2,800
(1,270)
5-1/4
(133.3)
3-7/8
(98.4)
1/2
(12.7)
.62
(.28)
TSC150
1
1.00-1.50
(25.4-38.1)
2,800
(1,270)
5-1/4
(133.3)
3-7/8
(98.4)
1/2
(12.7)
.64
(.29)
TSC200
2
1.50-2.00
(38.1-50.8)
2,800
(1,270)
5-1/4
(133.3)
3-7/8
(98.4)
1/2
(12.7)
.75
(.34)
DISTRIBUTION CONNECTORS
SECTION DE
DE-3
DE3
HUBBELL
®
Power Systems
March 2009
ALUMINUM
HAC
SUSPENSIONBOLTEDANGLE
ALUMINUM
• For standard voltage angle construction with all aluminum, ACSR, or aluminum alloy conductor.
• Designed for use in turning angles up to 70° (including sag and turn angle).
Material: Body and Keeper—356 T6 aluminum alloy Hardware—galvanized steel Socket and Clevis—ductile iron, galvanized Cotter Pin—#302 stainless steel
NOTE: Recommended torque on U-bolts: 1/2”–480 in. lbs., 5/8”–720 in. lbs.
CATALOGNUMBER
FITTINGCLAMPING
RANGEINCHES (MM)
ULTIMATE BODY
STRENGTHLBS (KG)
DIMENSIONS INCHES (MM)APPROX.WT. EACHLBS. (KG)TYPE CAT.NO. L W H J PD
HAC118N
HAC118S
HAS118C
None
Socket
Clevis
—
SA10
CA10
1.00-1.18(25.40-29.97)
35,000(15,876)30,000
(13,608)25,000
(11,340)
9-7/8(250.83)
1-9/32(32.54)
2-3/4(69.85)
1/2(12.70)
5/8(15.88)
3.6 (1.63)
5.0 (2.27)
5.3 (2.40)
HAC147N
HAC147S
HAC147C
None
Socket
Clevis
—
SA13
CA13
1.25-1.47(31.75-37.34)
35,000(15,876)30,000
(13,608)25,000
(11,340)
9-3/4(247.65)
1-11/16(42.86)
3-1/4(82.55)
1/2(12.70)
5/8(15.88)
4.0 (1.81)
5.7 (2.59)
5.8 (2.63)
HAC182N
HAC182S
HAC182C
None
Socket
Clevis
—
SA1613
CA1613
1.55-1.82(39.37-46.23)
40,000(18,144)30,000
(13,608)25,000
(11,340)
10-1/8(257.18)
2-1/32(51.59)
3-1/2(88.90)
1/2(12.70)
3/4(19.05)
4.8 (2.18)
6.6 (3.02)
6.8 (3.08)
HAC204N
HAC204S
HAC204C
None
Socket
Clevis
—
SA1613
CA1613
1.73-2.04(43.94-51.82)
40,000(18,144)30,000
(13,608)25,000
(11,340)
11-1/4(285.75)
2-11/64(55.17)
3-1/2(88.90)
1/2(12.70)
3/4(19.05)
5.6 (2.54)
7.4 (3.36)
7.6 (3.45)
HAC213N
HAC213S
HAC213C
None
Socket
Clevis
—
SA1613
CA1613
1.81-2.13(45.97-54.10)
40,000(18,144)30,000
(13,608)25,000
(11,340)
11-1/4(285.75)
2-1/4(57.15)
3-3/4(95.25)
5/8(15.88)
3/4(19.05)
6.0 (2.72)
7.9 (3.58)
8.0 (3.63)
DISTRIBUTION CONNECTORSSECTION DE
DE-4
DE4
HUBBELL® Power SystemsMarch 2009
97642
BOLTEDJUMPER LOOP CLAMPS
ALUMINUMSUSPENSION
A very practical application of Ohio Brass® Hi*Lite® horizontal line post polymer insulators is for the support of jumper loops on transmission lines.
A Hi*Lite horizontal line post insulator is bolted to the tower and attached to the jumper loop as the illustration shows. Horizontal motion of the loop is completely restricted. Because the factor of wind sway is eliminated, length of the crossarm may be reduced. Difference in cost of insulation is not significant, but saving in tower cost can be attractive. And, regardless of cost, improved construction results.
Position of the clamp relative to the insulator can be changed by bolting the clamp through the upper hole in the insulator end fitting.
Jumper loop clamps are not intended for tangent span application.
Material:Body—aluminum alloyHardware—galvanized steel
NOTES:(1) Sockets and clevises can be supplied by adding “S” or “C” to catalog number. Example, AAC10490S.(2) Recommended torque on bolts: 300 in. lbs.
CATALOGNUMBER FIG. NO.
CLAMPING RANGE
INCHES (MM)
ULTIMATEBODY
STRENGTHLBS. (KG)
MAX. TAKE-OFF ANGLE
DIMENSIONSINCHES (MM) APPROX.
WT. EACHLBS. (KG)o L W H
AAC301 2 .198-.732(5.03-18.59)
7,000(3,175) 45˚ 4-1/4
(107.95)11/16
(17.46)2-7/8
(73.02)1.25(.57)
AAC302 1 .198-.732(5.03-18.59)
7,000(3,175) 45˚ 4-1/4
(107.95)11/16
(17.46)2-7/8
(73.02)1.25(.57)
AAC104N 1 .50-1.10(12.70-27.94)
12,000(5,443) 60˚ 5-1/4
(133.35)11/16
(17.46)4-1/8
(104.77)2.3
(1.04)
AAC10490N 2 .50-1.10(12.70-27.94)
12,000(5,443) 60˚ 5-1/4
(133.35)11/16
(17.46)4-1/8
(104.77)2.2(1)
SUSPENSIONBOLTED
ANGLE CLAMPALUMINUM
Intended for angle construction with all aluminum, ACSR or aluminum alloy conductor.Material: Body and Keeper—356-T6 aluminum alloy
Hardware—galvanized steelCotter Pin—#302 stainless steel
ALUMINUM
AAC
Recommended Torque: 1/2”–480 in. lbs, 5/8”–720 in. lbs.
CATALOG NUMBERRANGE OF
CONDUCTOR SIZES—INCHES (MM)ULTIMATE STR.
LBS.—(KG)
DIMENSIONSINCHES (MM) APPROX.
WT. EACHLBS. (KG)A B
976423002 1.00-1.40(25.40-35.56)
5,000 LBS.(2,268)
4-1/4(107.95)
2-3/8(60.33)
3.3(1.50)
976423003 1.40-1.60(35.56-40.64)
5,000 LBS.(2,268)
4-1/4(107.95)
2-3/8(60.33)
3.3(1.50)
600643001 1.60-2.00(40.64-50.80)
5,000 LBS.(2,268)
5-1/4(133.35)
3(76.20)
4.1(1.86)
ALUMINUM
DISTRIBUTION CONNECTORS SECTION DE
DE-5
DE5
HUBBELL® Power Systems March 2009
ALUMINUM
YAAC
SUSPENSIONALUMINUM ANGLE CLAMP
Intended for angle construction with all aluminum, ACSR or alu-minum alloy conductor.
Built-in Y-Clevis Fitting allows compound horizontal and vertical angles necessary for residential and urban construction.
Material: Body and Keeper — 356-T6 aluminum alloyHardware — galvanized steelCotter Pin — #302 stainless steel
Recommended Torque on Bolt: 300 in. lbs.
CATALOGNUMBER
CLAMPINGRANGE
INCHES (MM)
ULTIMATEBODY
STRENGTHLBS. (KG)
MAX. TAKE-OFF ANGLE DIMENSIONS INCHES (MM) APPROX.
WT. EACHLBS. (KG)O D L W H
YAAC125 .50-1.25(12.70-31.75)
12,000(5,443) 45 2.45
(62.23)4.50
(114.3)4.83
(122.68)4.27
(108.46)2.0
(.91)
DISTRIBUTION CONNECTORSSECTION DE
DE-6
DE6
HUBBELL® Power SystemsMarch 2009
BRONZE
BRS
SUSPENSIONBOLTEDBRONZE
For use with copper or Copperweld® cable.
Through the use of these clamps hysteresis and eddy current power losses, are reduced to a minimum. Liners are not required.
Material:Body—high tensile bronze alloyKeeper—electrical bronze*Hardware—galvanized steelSocket and Clevis—ductile iron, galvanizedCotter Pin—#302 stainless steel
NOTE: Recommended torque on U-bolts: 1/2”–480 in. lbs.* Bronze U-bolts, nuts and washers can be furnished by adding suffix “ED” to catalog number. Example, BRS60NED.
CATALOG NUMBER
FITTING CLAMPINGRANGE
INCHES (MM)
ULTIMATEBODY
STRENGTHLBS. ((KG)
MAX. TAKE-OFF ANGLE
DIMENSIONSINCHES (MM) APPROX.
WT. EACHLBS. (KG)TYPE CAT. NO. o L W H
BRS60NBRS60SBRS60C
NoneSocketClevis
—SA04CA04
.20-.60(5.08-15.24)
16,000(7,258) 15˚ 6-1/2
(165.10)3/4
(19.05)2-1/4
(57.15)
2.9 (1.32)4.4 (1.90)4.5 (2.04)
BRS83NBRS83SBRS83C
NoneSocketClevis
—SA06CA06
.40-.83(10.16-21.08)
18,000(8,615) 15˚ 7-1/4
(184.15)31/32(24.6)
2-3/8(60.33)
3.7 (1.68)5.0 (2.27)5.4 (2.45)
BRS100NBRS100SBRS100C
NoneSocketClevis
—SA07CA10
.625-1.00(15.88-25.40)
22,000(9,979) 15˚ 8
(203.20)1-1/8
(28.58)2-1/2
(63.50)
4.5 (2.04)5.9 (2.68)6.3 (2.81)
BRS118NBRS118SBRS118C
NoneSocketClevis
—SA11CA10
.70-1.18(17.78-29.97)
25,000(11,340) 20˚ 8
(203.20)1-9/32(32.55)
2-1/2(63.50) 4.9 (2.22)
DISTRIBUTION CONNECTORS SECTION DE
DE-7
DE7
HUBBELL® Power Systems March 2009
DUCTILE IRON
MS
SUSPENSIONBOLTED
FERROUS
For ground wire application with galvanized steel cable with or without armor rods.
Type MS may also be used to suspend copper or copperweld cable. Magnetic induction heating will occur.
Material:Body and Keeper—ductile iron, galvanizedHardware—galvanized steelCotter Pin—#302 stainless steel
CLAMP RECOMMENDATIONSFOR GALVANIZED OVERHEAD GROUND WIRE
STEELCABLE
SIZE
BARE CONDUCTOR FORMED ARMOR RODS
CLAMPCAT. NO.
DIAMETERINCHES (MM)
CLAMPCAT. NO.
DIAMETERINCHES (MM)
1/4”-7 Str.5/16”-7 Str.3/8”-7 Str.
7/16”-7 Str.1/2”-7 Str.5/8”-7 Str.
MS46MS46MS46MS46MS60MS70
.240 (6.10)
.312 (7.92)
.360 (9.14).435 (11.05).495 (12.57).621 (15.77)
MS46MS60MS60MS82MS82
—
.412 (10.46)
.512 (13.00)
.560 (14.22)
.673 (17.09)
.771 (19.58)—
NOTE: Recommended torque on U-bolts:1/2”–480 in. lbs.
CATALOGNUMBER
FITTING CLAMPINGRANGE
INCHES (MM)
ULTIMATEBODY
STRENGTHLBS. (KG)
DIMENSIONSINCHES (MM) APPROX.
WT. EACHLBS. (KG)TYPE CAT. NO. L H W
MS46NMS46SMS46C
NoneSocketClevis
—SA04CA04
.20-.46(5.08-11.68)
16,000(7,258)
5-5/8(142.88)
2(50.8) 7/8
2.15 (.98)3.4 (1.54)3.8 (1.73)
MS60NMS60SMS60C
NoneSocketClevis
—SA04CA04
.20-.60(5.08-15.24)
16,000(7,258)
6-7/16(163.51)
2(50.8) 7/8
2.65 (1.20)3.9 (1.77)4.3 (1.95)
MS70NMS70SMS70C
NoneSocketClevis
—SA05CA05
.30-.70(7.62-17.78)
18,000(8,165)
6-3/8(161.93)
2(50.8) 15/16
2.90 (1.32)4.2 (1.91)4.6 (2.09)
MS82NMS82SMS82C
NoneSocketClevis
—SA06CA06
.40-.82(10.16-20.83)
18,000(8,165)
7-1/2(190.50)
2-3/8(60.33) 15/16
3.25 (1.47)4.7 (2.13)5.0 (2.27)
MS104NMS104SMS104C
NoneSocketClevis
—SA10CA10
.50-1.04(12.70-26.42)
25,000(11,340)
8(203.2)
2-3/4(69.9) 1-1/8
5.70 (2.59)7.1 (3.22)7.4 (3.36)
DISTRIBUTION CONNECTORSSECTION DE
DE-8
DE8
HUBBELL® Power SystemsMarch 2009
SUSPENSIONBOLTED
GROUND WIRE SUPPORT BRACKET(SWING TYPE)
FERROUS
Designed to be used with most types of suspension clamps (aluminum or ferrous). May be mounted with through bolt and lag screw.
Material:Body—ductile iron, galvanizedLink—forged steel
NOTE: Recommended torque on 1/2” bolt: 480 in. lbs.
CATALOGNUMBER
CLAMPING RANGE—INCHES (MM)ULTIMATE
BODYSTRENGTHLBS. (KG)
MAX. TAKE-OFFANGLE APPROX.
WT. EACHLBS. (KG)SMALL GROOVE LARGE GROOVE 0
814602000828602000
.162-.25(4.11-6.35)
.25-.60(6.35-15.24)
7,000(3,175) 60˚ 1.5
(.68)
CATALOGNUMBER
MOUNTING HARDWAREMAX. DIA. INCHES (MM) MOUNTING BOLT
SPACINGINCHES (MM)
ULTIMATE STRENGTHVERTICALLBS. (KG)
APPROX.WT. EACHLBS. (KG)BOLT LAG SCREWS
GWB1S 3/4 (19.05) 1/2 (12.70) 3-5/16 (84.14) 5,000 (2268) 2.6 (1.18)
DUCTILE IRON
SUSPENSIONBOLTED
ANGLE CLAMPFERROUS
Intended for use in angle construction with galvanized steel overhead ground wire or copper and Copperweld® phase wire. Magnetic induction heating will occur.
Material:Body and Keeper—ductile iron, galvanized Hardware—hot dip galvanized steelCotter Pin—#302 stainless steelGrommet—neoprene
DUCTILE IRON
GWB1S
DISTRIBUTION CONNECTORS SECTION DE
DE-9
DE9
HUBBELL® Power Systems March 2009
DUCTILE IRON
SUSPENSIONBOLTED
TRUNNIONFERROUS
For ground wire applications with galvanized steel cable.
Designed for use on tangent suspension spans with horizontal or vertical post insulators.
Keeper is reversible for proper fit on different size conductors.
Material:Body and Keeper—ductile iron, galvanizedDuctile Iron—galvanizedHardware—galvanized steelAnti-static spring—#302 stainless steel
NOTES: (1) Recommended torque on bolts; 1/2”—480 in. lbs.
CATALOGNUMBER
CLAMPINGRANGE
INCHES (MM)
ULTIMATE BODY
STRENGTHLBS. (KG)
DIMENSIONS INCHES (MM)APPROX.WT. EACHLBS. (KG)L W J
2706503001 .25-.56(6.13-14.2)
2,800(1,270)
5-1/4(133.3)
3-7/8(98.4)
1/2(12.7) 2.50 (1.13)
2706513001 .50-1.06(12.7-26.9)
2,800(1,270)
5-1/4(133.3)
3-7/8(98.4)
1/2(12.7) 2.75 (1.24)
2706523001 1.06-1.50(26.9-38.1)
2,800(1,270)
5-1/4(133.3)
3-7/8(98.4)
1/2(12.7) 3.00 (1.36)
SUSPENSIONBOLTED
GROUND WIRE SUPPORT BRACKET (RIGID TYPE)
Designed to accommodate most (aluminum or ferrous) trunnion type clamps. May be mounted with one bolt and lag screw or two bolts.
Material: Ductile iron, galvanized.
CATALOGNUMBER
MOUNTING HARDWAREMAX. DIA. INCHES (MM) MOUNTING
BOLT SPACINGINCHES (MM)
ULTIMATESTRENGTHVERTICALLBS. (KG)
APPROX.WT. EACHLBS. (KG)BOLT LAG SCREWS
GWB1R 5/8 (15.88) 1/2 (12.70) 3-1/4 (82.55) 5,000 (2268) 3.1 (1.40)
DUCTILE IRON
GWB1R
DISTRIBUTION CONNECTORSSECTION DE
DE-10
DE10
HUBBELL® Power SystemsMarch 2009
T2 Clamps
T2 is the designation for a type of conductor developed in the mid-1960’s by Kaiser Aluminum Company. The “T” is for twisted and the “2” indicates two wires twisted together. T2 is actually two regular round conductors of any type (AC-SR,AAC,ACAR,AAAC, etc.) twisted around each other at 9-foot intervals. The main purpose of the twisted design is to prevent galloping by constantly varying the cable diameter face. This wind-induced galloping phenomena occurs primarily in the Midwestern U.S.
Some utilities prefer suspension and strain clamps with “double groove” clamping, while others find that single-groove standard clamps, properly sized and tested, perform adequately on T2.
Anderson offers both single and double groove clamps. In the early days of T2, filler rods were used and designed for round conductor. After years of field service and testing, Anderson feels filler rods are no longer necessary and we do not recom-mend them.
Another clamp approach is to separate the two round conductors at the clamping point and use two separate single-groove clamps attached to a small yoke plate.
Anderson can supply your T2 clamp needs regardless of your construction preference.
DISTRIBUTION CONNECTORS SECTION DE
DE-11
DE11
HUBBELL® Power Systems March 2009
ST
RA
IN C
LA
MP
S
RE
CO
MM
EN
DE
D A
PP
LIC
AT
ION
CH
AR
T O
F A
ND
ER
SO
N A
LU
MIN
UM
CL
AM
PS
FO
R T
-2 C
ON
DU
CT
OR
CO
ND
UC
TO
R D
AT
AR
EC
OM
ME
ND
ED
CL
AM
PS
CO
DE
WO
RD
CO
ND
UC
TO
R S
IZE
(Q
TY
.) A
WG
DU
AL
C
ON
DU
CT
OR
O
UT
SID
E
DIM
EN
SIO
NS
IN
CH
ES
T2
CO
ND
UC
TO
R
UL
TIM
AT
E
ST
RE
NG
TH
L
BS
LA
RG
E
QU
AD
RA
NT
D
EA
D-E
ND
DO
UB
LE
-G
RO
OV
E
KE
EP
ER
DO
UB
LE
G
RO
OV
E
DE
AD
-EN
D
(SE
E N
OT
E 2
)
ST
RA
IGH
T
LIN
E D
EA
D-
EN
D S
TR
AIN
C
LA
MP
(WA
VE
S
EA
T D
ES
IGN
)
ST
RA
IGH
T L
INE
D
EA
D-E
ND
, SP
RIN
G
LO
AD
ED
, SID
E
OP
EN
(S
TR
AIG
HT
C
ON
TO
UR
ED
G
RO
OV
E)
ST
RA
IGH
T
LIN
E D
EA
D-
EN
D, S
PR
ING
L
OA
DE
D, S
IDE
O
PE
N S
TR
AIN
C
LA
MP
SM
AL
L
QU
AD
RA
NT
D
EA
D-E
ND
LA
RG
E
QU
AD
RA
NT
D
EA
D-E
ND
T-2
IRIS
(2)
2-7
ST
R. A
AC
..2
92 x
.584
2532
AD
E60
AD
S60
PG
70S
D70
T-2
SP
AR
RO
W(2
) 2-
6/1
AC
SR
.316
x .6
8255
80A
DE
70A
DS
88A
DE
Z88
PG
70S
D70
T-2
RA
VE
N(2
) 1/
0-6/
1 A
CS
R.3
98 x
.796
8560
SD
T28
6A
R20
25A
DE
86A
DS
116
AD
EZ
88P
G86
LS
D86
T-2
QU
AIL
(2)
2/0-
6/1
AC
SR
.447
x .8
9410
,690
SD
T28
6A
R20
25A
DE
98A
DS
130
AD
EZ
116
PG
100L
SD
86
T-2
PIG
EO
N(2
) 3/
0-6/
1 A
CS
R.5
02 x
1.0
0413
,350
SD
T21
12A
R20
25A
DS
130
AD
EZ
116
PG
100L
SD
86
T-2
PE
NQ
UIN
(2)
4/0-
6/1
AC
SR
.562
x 1
.126
16,8
40S
DT
2112
AR
2025
AD
S13
0T2
AD
EZ
116
PG
130
SD
112
T-2
PA
RT
RID
GE
(2)
266.
8-26
/7 A
CS
R.6
42 x
1.2
8422
,500
SD
T21
85A
R20
50A
DE
155
AD
S13
0T2
PG
130
SD
112
T-2
LIN
NE
T(2
) 33
6.4-
26/7
AC
SR
.721
x 1
.442
28,1
00S
DT
2185
AR
2050
AD
E15
5S
D13
0
T-2
CH
ICK
AD
EE
(2)
397.
5-18
/1 A
CS
R.7
43 x
1.4
8620
,080
SD
T21
85A
R20
50A
DE
155
SD
155
T-2
IBIS
(2)
397.
5-26
/7 A
CS
R.7
83 x
1.5
6632
,380
SD
T21
85A
R20
50A
DE
155
SD
185
T-2
PE
LIC
AN
(2)
477.
0-18
/1 A
CS
R.8
14 x
1.6
2823
,740
SD
T21
85A
R21
00S
D18
5
T-2
MIS
TL
ET
OE
(2)
556.
5-37
ST
R. A
AC
.858
x 1
.716
19,6
60S
DT
2185
AR
2100
SD
185
T-2
HA
WK
(2)
477.
0-26
/7 A
CS
R.8
58 x
1.7
1638
,860
SD
T21
85A
R21
00S
D18
5 (1
)
T-
2 O
SP
RE
Y(2
) 55
6.5-
18/1
AC
SR
.879
x 1
.758
27,7
00S
DT
2185
AR
2100
SD
185
T-2
HE
N(2
) 44
7.0-
30/7
AC
SR
.883
x 1
.766
46,6
00A
R21
00S
D18
5
T-2
DO
VE
(2)
556.
5-26
/7 A
CS
R.9
27 x
1.8
5444
,800
AR
2100
T-2
GR
OS
BE
AK
(2)
636.
0-26
/7 A
CS
R.9
90 x
1.9
8050
,000
AR
2100
T-2
TE
RN
(2)
795.
0-45
/7 A
CS
R1.
063
x 2.
126
45,8
00A
R21
00
T-2
RA
IL(2
) 95
4.0-
45/7
AC
SR
1.16
5 x
2.33
053
,800
AR
2150
T-2
BL
UE
JAY
(2)
1113
.0-4
5/7
AC
SR
1.25
9 x
2.51
861
,800
AR
2150
(1)
RE
CO
MM
EN
DA
TIO
N B
AS
ED
ON
556
.5-1
8/1
TE
ST
VA
LUE
S IN
LIE
U O
F 5
56.5
-37
ST
R. A
AC
.
(2)
RE
CO
MM
EN
DA
TIO
N F
OR
LO
W T
EN
SIO
N A
PP
LIC
AT
ION
, RE
FE
R T
O C
AT
ALO
G F
OR
CLA
MP
ULT
IMA
TE
ST
RE
NG
TH
RA
TIN
G.
STRAIN AND SUSPENSION CLAMPS
DISTRIBUTION CONNECTORSSECTION DE
DE-12
DE12
HUBBELL® Power SystemsMarch 2009
SU
SP
EN
SIO
N A
ND
ST
IRR
UP
CL
AM
PS
RE
CO
MM
EN
DE
D A
PP
LIC
AT
ION
CH
AR
T O
F A
ND
ER
SO
N C
LA
MP
S F
OR
T-2
CO
ND
UC
TO
R
CO
ND
UC
TO
R D
AT
AR
EC
OM
ME
ND
ED
CL
AM
PS
CO
DE
WO
RD
CO
ND
UC
TO
R S
IZE
(QT
Y.)
AW
G
DU
AL
C
ON
DU
CT
OR
SO
UT
SID
E
DIM
EN
SIO
NS
INC
HE
ST
2 C
ON
DU
CT
OR
UL
TIM
AT
ES
TR
EN
GT
HL
BS
AL
UM
INU
MS
US
PE
NS
ION
C
LA
MP
DO
UB
LE
G
RO
OV
EK
EE
PE
R
345
KV
C
OR
ON
A F
RE
E
AL
UM
INU
M S
US
PE
NS
ION
C
LA
MP
DO
UB
LE
G
RO
OV
E
AL
UM
INU
M
TR
UN
ION
SU
SP
EN
SIO
N
CL
AM
PD
OU
BL
EG
RO
OV
E
KE
EP
ER
DU
CT
ILE
IRO
N
TR
UN
ION
S
US
PE
NS
ION
CL
AM
P W
ITH
AL
UM
INU
M
DO
UB
LE
GR
OO
VE
K
EE
PE
R
AL
UM
INU
M
SU
SP
EN
SIO
N
CL
AM
PS
ING
LE
G
RO
OV
E
AL
UM
INU
M
TR
UN
ION
SU
SP
EN
SIO
N
CL
AM
P S
ING
LE
G
RO
OV
E
AL
UM
INU
M
ME
CH
AN
ICA
L S
TIR
RU
P S
ING
LE
GR
OO
VE
T-2
IRIS
(2)
2-7S
TR
. AA
C.
.292
x .5
8425
32H
AS
-85
TS
C-5
7 (3
)A
HLS
-024
019-
E
T-2
SP
AR
RO
W(2
) 2-
6/1
AC
SR
.316
x .6
8255
80T
SC
T2-
150
TS
CD
T2-
150
HA
S-8
5T
SC
-86
(4)
AH
LS-0
2401
9-E
T-2
RA
VE
N(2
) 1/
0-6/
1 A
CS
R.3
98 x
.796
8560
HA
ST
2-11
8C
FS
T2-
75T
SC
T2-
150
TS
CD
T2-
150
HA
S-1
04T
SC
-86
(3)
AH
LS-3
9702
1-E
T-2
QU
AIL
(2)
2/0-
6/1
AC
SR
.447
x .8
9410
,690
HA
ST
2-11
8C
FS
T2-
75T
SC
T2-
150
TS
CD
T2-
150
HA
S-1
04T
SC
-106
-T2(
3)A
HLS
-397
021-
E
T-2
PIG
EO
N(2
) 3/
0-6/
1 A
CS
R.5
02 x
1.0
0413
,350
HA
ST
2-11
8C
FS
T2-
75T
SC
T2-
150
TS
CD
T2-
150
HA
S-1
18T
SC
-150
-T2(
4)A
HLS
-954
022-
E
T-2
PE
NQ
UIN
(2)
4/0-
6/1
AC
SR
.562
x 1
.126
16,8
40H
AS
T2-
139
CF
ST
2-75
TS
CT
2-15
0T
SC
DT
2-15
0H
AS
-139
TS
C-1
50-T
2(3)
AH
LS-9
5402
2-E
T-2
PA
RT
RID
GE
(2)
266.
8-26
/7 A
CS
R.6
42 x
1.2
8422
,500
HA
ST
2-13
9C
FS
T2-
75T
SC
T2-
200
TS
CD
T2-
200
HA
S-1
39T
SC
-150
-T2(
3)
T-2
LIN
NE
T(2
) 33
6.4-
26/7
AC
SR
.721
x 1
.442
28,1
00H
AS
T2-
182
CF
ST
2-75
TS
CT
2-20
0T
SC
DT
2-20
0H
AS
-162
TS
C-1
50-T
2(3)
T-2
CH
ICK
AD
EE
(2)
397.
5-18
/1 A
CS
R.7
43 x
1.4
8620
,080
HA
ST
2-18
2C
FS
T2-
75T
SC
T2-
200
TS
CD
T2-
200
HA
S-1
82
T-2
IBIS
(2)
397.
5-26
/7 A
CS
R.7
83 x
1.5
6632
,380
HA
ST
2-18
2C
FS
T2-
88T
SC
T2-
200
TS
CD
T2-
200
HA
S-1
82
T-2
PE
LIC
AN
(2)
477.
0-18
/1 A
CS
R.8
14 x
1.6
2823
,740
HA
ST
2-18
2C
FS
T2-
88T
SC
T2-
200
TS
CD
T2-
200
HA
S-1
82
T-2
MIS
TL
ET
OE
(2)
556.
5-37
ST
R.A
AC
.858
x 1
.716
19,6
60C
FS
T2-
88T
SC
T2-
200
TS
CD
T2-
200
HA
S-2
04
T-2
HA
WK
(2)
477.
0-26
/7 A
CS
R.8
58 x
1.7
1638
,860
CF
ST
2-88
TS
CT
2-20
0T
SC
DT
2-20
0H
AS
-204
T-
2 O
SP
RE
Y(2
) 55
6.5-
18/1
AC
SR
.879
x 1
.758
27,7
00C
FS
T2-
88T
SC
T2-
200
TS
CD
T2-
200
HA
S-2
04
T-2
HE
N(2
) 44
7.0-
30/7
AC
SR
.883
x 1
.766
46,6
00C
FS
T2-
88T
SC
T2-
200
TS
CD
T2-
200
T-2
PA
RA
KE
ET
(2)
556.
5-18
/1 A
CS
R.9
14 x
1.8
2839
,700
CF
ST
2-13
0
T-2
AR
BU
TU
S(2
) 79
5-37
ST
R. A
AC
1.02
6 x
2.05
227
,540
HA
ST
2-25
2C
FS
T2-
130
T-2
DO
VE
(2)
556.
5-26
/7 A
CS
R.9
27 x
1.8
5444
,800
CF
ST
2-13
0H
AS
-204
T-2
RO
OK
(2)
636.
0-24
/7 A
CS
R.9
77 x
.1.9
5445
,200
HA
ST
2-25
2C
FS
T2-
130
T-2
GR
OS
BE
AK
(2)
636.
0-26
/7 A
CS
R.9
90 x
1.9
8050
,000
HA
ST
2-25
2C
FS
T2-
130
HA
S-2
27
T-2
TE
RN
(2)
795.
0-45
/7 A
CS
R1.
063
x 2.
126
45,8
00H
AS
T2-
252
CF
ST
2-13
0H
AS
-252
T2
T-2
RA
IL(2
) 95
4.0-
45/7
AC
SR
1.16
5 x
2.33
053
,800
HA
ST
2-25
2C
FS
T2-
130
HA
S-2
52T
2
T-2
BL
UE
JAY
(2)
1113
.0-4
5/7
AC
SR
1.25
9 x
2.51
861
,800
CF
ST
2-13
0H
AS
-280
(1)
ON
CA
TA
LOG
TY
PE
TS
C U
SE
LA
RG
E S
IDE
OF
KE
EP
ER
ON
CA
BLE
SP
EC
IFIE
D.
(2)
ON
CA
TA
LOG
TY
PE
TS
C U
SE
SM
ALL
SID
E O
F K
EE
PE
R O
N C
AB
LE S
PE
CIF
IED
.
DISTRIBUTION CONNECTORS SECTION DE
DE-13
DE13
HUBBELL® Power Systems March 2009
ALUMINUM/DUCTILE
TSCT2/TSCDT2
SUSPENSIONBOLTED
DOUBLE GROOVE TRUNNION SUSPENSION CLAMPSALUMINUM
For standard voltage applications with all aluminum, ACSR, or aluminum alloy T2 conductor.
Designed with double groove keeper for use on tangent sus-pension spans with horizontal or vertical post insulators.
Keeper is reversible for proper fit on different size conduc-tors.
Material:TSC T2: Body and Keeper—356-T6 aluminumalloy.
TSCD-T2: Body - Ductile iron—galvanizedKeeper—356-T6 aluminum alloyHardware—Galvanized steelAnti-static spring—302 stainless steel
Note: Anti-static springs can be supplied by adding “ARIV” to catalog number.
NOTE: Recommended torque: 300 in. lbs.
CATALOGNUMBER
FIG. NO.
CLAMPINGRANGE
INCHES (MM)
ULTIMATE BODY STRENGTH
LBS. (KG)
MAX. TAKE-OFF ANGLE
o
DIMENSIONS INCHES (MM) APPROX.WT. EACHLBS. (KG)L W J
TSCT2150 1 .316-.563(8.03-14.3)
2,8000(1,270) 20˚ 5-1/4
(133.3)3-7/8(98.4)
1/2(12.7)
.62(.28)
TSCT2200 2 .642-.927(16.31-23.21)
2,8000(1,270) 20˚ 5-1/4
(133.3)3-7/8(98.4)
1/2(12.7)
.64(.29)
TSCDT2150 1 .316-.563(8.03-14.3)
2,8000(1,270) 15˚ 5-1/4
(133.3)3-7/8(98.4)
1/2(12.7)
2.7(1.22)
TSCDT2200 2 .642-.927(16.31-23.21)
2,8000(1,270) 20˚ 5-1/4
(133.3)3-7/8(98.4)
1/2(12.7)
3.0(1.36)
DISTRIBUTION CONNECTORSSECTION DE
DE-14
DE14
HUBBELL® Power SystemsMarch 2009
ALUMINUM
HAST2
SUSPENSIONBOLTED
DOUBLE GROOVEALUMINUM
Made with double groove keeper to accommodate twin conductor.For standard voltage application with all aluminum, ASCR, or aluminum alloy conductor.
Material: Body and Keeper—356-T2 aluminum al-loy, heat treated. Sockets and clevises—654512 ductile iron, hot dipped galvanized.Hardware—galvanized steelCotter pins—stainless steel
Note: Clamp may be furnished with 5/8”-11 galvanized steel bolt and nut with #302 stainless steel cotter pin by adding “BNK” suffix to catalog number.Example: HAST2118SBNK
Notes: (1) Recommended torque on U-bolts: 1/2” –480 in - lbs., 5/8”–720 in - lbs.
CATALOGNUMBER
FITTING CLAMPING RANGE DIMENSIONS INCHES ULT. STR.IN LBS.
APPROX.WEIGHTTYPE CAT.NO. ACSR INCHES ALUMINUM A B C D R J
HAST2118SHAST2118CHAST2118N
SOCKETCLEVISNONE
SA10CA10
...
1/0TO3/0
.398TO
.502
2/0-7 STR.TO
3/0-19 STR.8.00 2.75 1.41 2.41 5.97 1/2 25,000
4.404.502.80
HAST2139SHAST2139CHAST2139N
SOCKETCLEVISNONE
SA13CA13
...
134.-12/7TO
266.8-26/7
.522TO
.642
4/0-7 STR.TO
300-61 STR.8.88 3.00 1.63 2.56 6.00 1/2 25,000
4.905.003.30
HAST2182SHAST2182CHAST2182N
SOCKETCLEVISNONE
SA16CA16
...
336-18/1TO
477-18/1
.684TO
.814
350-37 STR.TO
500-37 STR.10.00 3.25 2.06 3.00 6.00 1/2 25,000
6.006.104.30
HAST2252SHAST2252CHAST2252N
SOCKETCLEVISNONE
SA22CA22
...
636-24/7TO
954-45/7
.977TO
1.165
750-61 STR.TO
1,000-61 STR.12.00 4.25 2.68 3.81 11.00 5/8
30,00025,00030,000
11.8012.3010.00