subzero design guide

SUB-ZERO DESIGN GUIDE

Contents

Built-In Refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . . 3

PRO 48 Refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . 44

Integrated Refrigeration . . . . . . . . . . . . . . . . . . . . . . 50

Wine Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Undercounter Refrigeration . . . . . . . . . . . . . . . . . . . . 84

Sub-Zero Warranties . . . . . . . . . . . . . . . . . . . . . . . . . 92

Features and specifications are subject to change at anytime without notice. Visit subzero.com/specs for the mostup-to-date information.

IMPORTANT NOTE: Throughout this guide, dimensions inparentheses are millimeters unless otherwise specified.

MODELS BI-36RG AND BI-36F

Built-In Refrigeration 3

subzero.com/specs

Built-In Refrigeration. For the built-in line, Sub-Zero designers and engineers took a fresh look at everything, insideand out. Exterior refinements include redesigned grilles and lower-profile hinges. Inside, new technology in food preserva-tion makes the built-in line nothing short of revolutionary.

36"(914)

36"(914)

36"(914)

84"(2134)

BI-36R

36"(914)

36"(914)

84"(2134)

30"(762)

30"(762)

48"(1219)

48"(1219)

42"(1067)

42"(1067)

84"(2134)

36"(914)

BI-36RG BI-36F BI-30UGBI-30U BI-36U BI-36UG

BI-36S BI-42S BI-42SD BI-48S BI-48SD

BUILT-IN MODELS

KEY FEATURES

• Four distinct design approaches: framed, overlay,flush inset and stainless steel.

• Handle options coordinate with handles of Wolfcooking products.

• Dual refrigeration; two compressors preserve food’sgoodness in two sealed compartments.

• Energy efficient; many models are ENERGY STAR®

qualified.

• Advanced water filtration and air purification systems.

• Crisper and deli drawers form a lower-temperaturezone for produce and meats.

• Flip-up grille provides easy access for quick routinemaintenance.

• All models are Star-K certified.


Built-In Design Options. A design classic is now even better. Four distinct design approaches provide limitlessflexibility for creating a beautiful kitchen. Lower-profile hinges enable the built-in units to blend more seamlessly withsurrounding cabinetry.

Framed. Custom cabinetrypanels slide into the door toblend into the kitchen design.Shown with full-length handleand louvered grille option forthe traditional Sub-Zero look.

Overlay. Custom cabinetoverlay panels can becombined with uniquehardware for design flexibility.Shown with pro handle optionto complement Wolf ranges.


subzero.com/specs

Flush Inset. This designoption allows for a flush doorand grille. Stainless steel panelsare available as sales acces-sories. Shown with tubularhandle option to mirror Wolfbuilt-in ovens.

Stainless Steel. For aprofessional look, this designrequires no customization. Tocomplement the look of Wolfranges, choose the pro handleoption shown here.


36" (914)

84"(2134)

24" (610)

4" (102)

733/4"(1873)

237/8"(606)

371/4"(946)

17"(432)

237/8" (606)

23/8" (60)

HEIGHT DIMENSIONS ± 1/2" (13)

MODELS BI-36R, BI-36RG AND BI-36F

Interior Capacity R cu ft (L) F cu ft (L)

ALL REFRIGERATOR / ALL FREEZER MODELS

BI-36R 23.4 (663)

BI-36RG 23.2 (657)

BI-36F 22.8 (646)

OVER-AND-UNDER MODELS

BI-30U 13.0 (368) 4.1 (116)

BI-30UG 13.0 (368) 4.1 (116)

BI-36U 16.2 (459) 5.3 (150)

BI-36UG 16.1 (456) 5.3 ( 150)

SIDE-BY-SIDE MODELS

BI-36S 12.2 (346) 8.0 (227)

BI-42S 16.1 (456) 8.0 (227)

BI-42SD 16.0 (453) 8.1 (230)

BI-48S 18.8 (532) 9.5 (269)

BI-48SD 18.7 (530) 9.7 (265)

Shipping Weight lbs (kg)

ALL REFRIGERATOR / ALL FREEZER MODELS

BI-36R 420 (191)

BI-36RG 430 (195)

BI-36F 406 (184)

OVER-AND-UNDER MODELS

BI-30U 462 (210)

BI-30UG 476 (216)

BI-36U 515 (234)

BI-36UG 529 (240)

SIDE-BY-SIDE MODELS

BI-36S 538 (244)

BI-42S 582 (264)

BI-42SD 608 (276)

BI-48S 630 (286)

BI-48SD 656 (298)

Shipping weights and overall dimensions are based onstainless steel models. For flush inset applications, add1/2" (13) to door clearance dimensions.

All Refrigerator / All Freezer Models

OVERALL DIMENSIONS

Built-In Models

SPECIFICATIONS


subzero.com/specs

30" (762)

84"(2134)

24" (610)

4" (102)

503/4"(1289)

23"(584)

237/8"(606)

235/8"(600) 311/4"

(796)

141/2"(368)

237/8" (606)

23/8" (60)


MODELS BI-30U AND BI-30UG

36" (914)

84"(2134)

24" (610)

4" (102)

503/4"(1289)

23"(584)

237/8"(606)

235/8"(600) 371/4"

(946)

17"(432)

237/8" (606)

23/8" (60)


MODELS BI-36U AND BI-36UG

Over-and-Under Models

OVERALL DIMENSIONS


Overall dimensions are based on stainless steel models.For flush inset applications, add 1/2" (13) to door clearancedimensions.

42" (1067)

84"(2134)

24" (610)

4" (102)

733/4"(1873)

237/8" (606)

237/8"(606)

261/4"(668)

121/2"(318)

83/4"(222)

23/8" (60)


MODELS BI-42S AND BI-42SD

36" (914)

84"(2134)

24" (610)

4" (102)

733/4"(1873)

237/8"(606)

221/4"(565)

81/2"(216)

101/4"(260)

237/8" (606)

23/8" (60)


MODEL BI-36S

Side-by-Side Models

OVERALL DIMENSIONS


subzero.com/specs

48" (1219)

84"(2134)

24" (610)

4" (102)

733/4"(1873)

237/8" (606)

237/8"(606)

30"(762)

14"(356)

93/4"(248)

23/8" (60)


Side-by-Side Models

OVERALL DIMENSIONS

MODELS BI-48S AND BI-48SD


Opening Width A

BI-36R, BI-36RG and BI-36F 351/2" (902)

BI-30U and BI-30UG 291/2" (746)

BI-36U and BI-36UG 351/2" (902)

BI-36S 351/2" (902)

BI-42S and BI-42SD 411/2" (1054)

BI-48S and BI-48SD 471/2" (1206)

IMPORTANT NOTE: If two units are installed side by side,refer to pages 30–31 for dual standard installations.

Stainless steel models are ready to install out of the box.

UNIT WITH3/4" (19) PANEL

24" (610)OPENING

DEPTH

FRONT VIEWSIDE VIEW

TOP VIEW

AOPENING WIDTH

24" (610)OPENING DEPTH

833/4"(2127)

OPENINGHEIGHT

Built-In Models

STANDARD INSTALLATION


subzero.com/specs

Electrical Requirements

Power Supply 115 V AC, 60 Hz

Circuit Breaker 15 amp

Receptacle 3-prong grounding-type

Plumbing Requirements

Water Supply Line 1/4" OD copper line

Water Pressure 30–100 psi (2.1–6.9 bar)

Excess Water Line for Connection 36" (914)

3" (76)

18" (457)

FRONT VIEW

FLOOR

6"(152)

Location of water supply—rear.

Location of water supply—bottom.

TOP VIEW

BACK WALL1/2"(13)

18" (457) 6"(152)

FRONT VIEW

751/2"(1918)FROMFLOOR

7"(178) E

6"(152)

Location of electrical supply.

Planning Information

ELECTRICAL REQUIREMENTS

For all built-in models, the electrical supply should belocated within the shaded area shown in the illustration.Follow the National Electrical Code and local codes andordinances when installing the receptacle. A separatecircuit servicing only this appliance is required. A groundfault circuit interrupter (GFCI) is not recommended andmay cause interruption of operation.

PLUMBING REQUIREMENTS

All built-in models with an automatic ice maker come witha microbiological water filtration system. The water supplyline should be located within the shaded area shown in theillustrations. The water supply line should be connected tothe house supply with an easily accessible shut-off valvebetween the supply and the unit. Do not use self-piercingvalves. A saddle valve kit (4200880) is available throughyour authorized Sub-Zero dealer. The water line must notinterfere with installation of the anti-tip brackets.

IMPORTANT NOTE: A reverse osmosis system can beused provided there is constant water pressure of 30 psi(2.1 bar) to 100 psi (6.9 bar) supplied to the unit at alltimes. In this application, the microbiological water filtra-tion system should be set to bypass mode by removingthe water filter cartridge and inserting the bypass plug(7005018) available through your authorized Sub-Zerodealer. Installation instructions packed with the unit willoutline this procedure.


Framed Application

IMPORTANT NOTE: The framed application is not aseparate model. This is an overlay unit in a framed appli-cation.

The framed panel design option is available for all built-inoverlay models. You must specify panels, full-lengthhandles and a framed grille insert to achieve the traditionalframed look. For exact door panel dimensions refer toframed panel specifications on the following pages. Alsorefer to the full-scale templates at the end of this sectionfor additional panel and handle considerations.

Optional extended full-length handles that provide addi-tional finger clearance for raised panels are availablethrough your authorized Sub-Zero dealer.

Framed Panel Requirements

MAX WEIGHT PER PANEL

BI-36R, BI-36RG and BI-36F 75 lbs (34 kg)

All Other Framed Panels 50 lbs (23 kg)

MIN PANEL THICKNESS

All Framed Panels 1/4" (6)

Custom cabinetry panels slide into the door to blend into thekitchen design. Shown with full-length handle and louveredgrille option for the traditional Sub-Zero look.


subzero.com/specs

Framed Panels

If the thickness of the custom panels is less than 1/4" (6),they must be backed up with a sheet of shim material tobuild the total thickness to 1/4" (6). If the panel is thickerthan 1/4" (6), a routed edge must be provided around thepanel to ensure a proper fit. Refer to the illustrations.

IMPORTANT NOTE: For framed design applications,routing, recessing or optional extended handles may berequired on raised panels for finger clearance under thehandle. Refer to the full-scale templates at the end of thissection.

IMPORTANT NOTE: Do not cover a glass door with a solidpanel. Also, the edges of the window cut-out will need tobe finished, as they will be exposed.

IMPORTANT NOTE: When installing two units in a side-by-side application, refer to pages 30–31 for dual standardinstallations. Be aware that rough opening dimensions aredifferent for this application.

1/4" (6)PANEL

TRIMREVEAL

1/4" (6) min

DOOR

MAIN FRAME

Panels 1/4" (6) thick or less. Panels thicker than 1/4" (6).

TRIMREVEAL

1/4" (6) min

ROUT TO1/4" (6) DOOR

MAIN FRAME


Models BI-30U and BI-30UG

REFRIGERATOR W H

Door Panel 293/4" (756) 4915/16" (1268)

FREEZER W H

Drawer Panel 293/4" (756) 1811/16" (475)

BI-30UG W H

Window Cut-Out 191/2" (495) 3911/16" (1008)

A

Cut-Out Location 53/16" (132)


REFRIGERATOR W H

Door Panel 353/4" (908) 4915/16" (1268)

FREEZER W H

Drawer Panel 353/4" (908) 1811/16" (475)

BI-36UG W H

Window Cut-Out 251/2" (648) 3911/16" (1008)

A


Models BI-36R, BI-36RG and BI-36F

REFRIGERATOR/FREEZER W H

Door Panel 353/4" (908) 699/16" (1767)

BI-36RG W H

Window Cut-Out 251/2" (648) 541/16" (1373)

A B

Cut-Out Location 53/16" (132) 105/16" (262)

Framed Panels

BI-36R / BI-36F BI-36RG BI-30U / BI-36U BI-30UG / BI-36UG

H

W

H

W

AA

A

B

H

H

W

AA

A

A

H

H

W


subzero.com/specs

For models BI-42SD and BI-48SD, panel thickness in thedispenser area can range from 1/4" (6) to a maximum of11/8" (29). If the panel is thicker, you must rout out a minimum1/4" (6) flat landing area to accommodate the glasswell bezel.

Model BI-36S

REFRIGERATOR W H

Door Panel 1913/16" (503) 699/16" (1767)

FREEZER W H

Door Panel 157/16" (392) 699/16" (1767)

Models BI-42S and BI-42SD

REFRIGERATOR W H

Door Panel 2413/16" (630) 699/16" (1767)

FREEZER W H

Door Panel 167/16" (418) 699/16" (1767)

BI-42SD W H

Dispenser Cut-Out 57/8" (149) 127/16" (316)

A B

Cut-Out Location 17/8" (48) 283/4" (730)


REFRIGERATOR W H

Door Panel 281/2" (724) 699/16" (1767)

FREEZER W H

Door Panel 183/4" (476) 699/16" (1767)

BI-48SD W H


A B

Cut-Out Location 17/8" (48) 283/4" (730)

Framed Panels

BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD

H

WW

H

WW

B

A


Framed Application

OPTIONAL GRILLE PANEL

A panel grille, providing an 84" (2134) finished height, isstandard on overlay models. Optional panel grilles areavailable for 83" (2108) and 88" (2235) finished heights.

Grille panel dimensions listed are for a standard 84" (2134)finished height. For an 83" (2108) finished height, subtract1" (25) from grille panel height dimensions. For an 88"(2235) finished height, add 4" (102) to height dimensions.

Optional grille panel.

Optional Grille Panel W H

30" (762) Models 293/4" (756) 815/16" (227)

36" (914) Models 353/4" (908) 815/16" (227)

42" (1067) Models 413/4" (1060) 815/16" (227)

48" (1219) Models 473/4" (1213) 815/16" (227)

Grille Panel Requirements

MAX WEIGHT

Grille Panel 13 lbs (6 kg)

MIN PANEL THICKNESS

Grille Panel 1/4" (6)


subzero.com/specs

Framed Application

PARTIAL FRAMED OPTION

If you choose not to use custom panels above and belowthe glasswell for dispenser model BI-42SD or BI-48SD, astainless steel insert panel is available as a sales acces-sory. This accessory kit includes partial framed moldingand stainless steel panel to provide a spill-resistant finishabove and below the glasswell on the refrigerator dooronly. The partial framed accessory kit (7004855) isavailable through your authorized Sub-Zero dealer. Referto panel dimensions for the partial framed option below.

IMPORTANT NOTE: When using raised panels with thepartial framed kit, a 1/2" (13) trim reveal down to 1/4" (6)thickness is necessary at the bezel for the panels to fitproperly.

Optional Partial Framed Panels

BI-42SD W H

Refrigerator Panel 151/16" (383) 699/16" (1767)

Freezer Panel 167/16" (418) 699/16" (1767)

BI-48SD W H

Refrigerator Panel 163/4" (425) 699/16" (1767)

Freezer Panel 183/4" (476) 699/16" (1767)

WW

H

BI-42SD / BI-48SDPartial framed option.

Partial framed kit.


Overlay Panels

If you and your client have ordered an overlay model, youwill be adding panels and handles to give the unit a morecustom look. The overlay panel design option is availablefor all built-in overlay models. For exact door panel dimen-sions, refer to overlay panel specifications on the followingpages.

IMPORTANT NOTE: Overlay models can be used in anoverlay or a flush inset application. Be aware that theapplication specified will affect panel sizes, rough openingdimensions and installation.

The overlay design allows decorative panels to cover thedoor trim for a more seamless appearance that blendswith the design of the room. The most common way toachieve this look is to work with three panels—the decora-tive overlay panel, which is typically 3/4" (19), a .10" (3)spacer panel and a 1/4" (6) backer panel. Depending onyour cabinet manufacturer, this could also be one panelrouted for different dimensions.

Regardless of the physical construction of the panels(three-panel assembly or routed panel), you will need tofollow the overlay panel specifications on the followingpages for exact sizing and panel placement to ensure aproper fit.

Custom cabinet overlay panels can be combined with uniquehardware for design flexibility. Shown with pro handle optionto complement Wolf ranges and rangetops.

Overlay Panel Requirements



All Other Overlay Models 50 lbs (23 kg)


MIN PANEL THICKNESS

All Overlay Panels 5/8" (16)


subzero.com/specs

Overlay Panels

The illustrations provide a cross section view of the three-panel assembly, showing placement of the trim and a rearview of the three-panel assembly with critical dimensions,standard for all built-in models.

Overlay grille panels for the panel grille match the designof the overlay door panels. Dimensions for the grille panelare listed in the overlay panel specifications on the follow-ing pages.

IMPORTANT NOTE: On glass door models, the edges ofthe overlay, spacer and backer panels of the windowcut-out will need to be finished, as they will be exposed.

IMPORTANT NOTE: When installing two units in a side-by-side application, refer to pages 30–31 for dual standardinstallations. Be aware that rough opening dimensions aredifferent for this application.

1/8"(3)

OVERLAY PANEL

SPACER PANEL

BACKER PANEL

TRIM

5/16" (8) min

Panel assembly cross section. Panel assembly rear view.

1/4" (6).10" (3)

OVERLAYPANEL

SPACERPANEL

BACKERPANEL

3/4"(19)

typical

Do not exceed overlay panel dimensions, as this couldcause damage to panels and the Sub-Zero unit.


Overlay Panels


H

H

W

H

H

W

AA

A

B

H

H

H

W

AA

A

A

H

H

H

W

*Panel height may be increased by 1/2" (13) to hide uppermain frame. For more information, refer to the built-in panelconfigurator at subzero.com/trade/panels.

Grille panel dimensions listed are for a standard 84" (2134)finished height. For an 83" (2108) finished height, subtract 1"(25) from grille panel height dimensions. For an 88" (2235)finished height, add 4" (102) to height dimensions. An 83"(2108) or 88" (2235) panel grille must be ordered to accept an83" (2108) or 88" (2235) custom panel. Width dimensions donot vary.


REFRIGERATOR W H

Overlay Panel 30" (762) 501/8" (1273)

Spacer Panel 291/8" (740) 495/16" (1253)

Backer Panel 293/4" (756) 4915/16" (1268)

FREEZER W H

Overlay Panel 30" (762) 19" (483)

Spacer Panel 291/8" (740) 181/16" (459)

Backer Panel 293/4" (756) 1811/16" (475)

GRILLE W H

Overlay Panel 30" (762) 91/4" (235)*Spacer Panel 291/8" (740) 85/16" (211)

Backer Panel 293/4" (756) 815/16" (227)

BI-30UG W H

Window Cut-Out 191/2" (495) 395/8" (1006)

A



REFRIGERATOR / FREEZER W H

Overlay Panel 36" (914) 693/4" (1772)

Spacer Panel 351/8" (892) 6815/16" (1751)

Backer Panel 353/4" (908) 699/16" (1767)

GRILLE W H


Backer Panel 353/4" (908) 815/16" (227)

BI-36RG W H

Window Cut-Out 251/2" (648) 541/8" (1375)

A B

Cut-Out Location 51/4" (133) 103/8" (264)


REFRIGERATOR W H

Overlay Panel 36" (914) 501/8" (1273)

Spacer Panel 351/8" (892) 495/16" (1253)

Backer Panel 353/4" (908) 4915/16" (1268)

FREEZER W H

Overlay Panel 36" (914) 19" (483)

Spacer Panel 351/8" (892) 181/16" (459)

Backer Panel 353/4" (908) 1811/16" (475)

GRILLE W H


Backer Panel 353/4" (908) 815/16" (227)

BI-36UG W H

Window Cut-Out 251/2" (648) 395/8" (1006)

A



subzero.com/specs

Overlay Panels


H

H

WW

H

H

WW

B

A

*Panel height may be increased by 1/2" (13) to hide uppermain frame. For more information, refer to the built-in panelconfigurator at subzero.com/trade/panels.



REFRIGERATOR W H

Overlay Panel 283/4" (730) 693/4" (1772)

Spacer Panel 277/8" (708) 6815/16" (1751)

Backer Panel 281/2" (724) 699/16" (1767)

FREEZER W H

Overlay Panel 19" (483) 693/4" (1772)

Spacer Panel 181/8" (460) 6815/16" (1751)

Backer Panel 183/4" (476) 699/16" (1767)

GRILLE W H


Backer Panel 473/4" (1213) 815/16" (227)

BI-48SD W H


A B

Cut-Out Location 2" (51) 2813/16" (732)


REFRIGERATOR W H

Overlay Panel 251/16" (637) 693/4" (1772)

Spacer Panel 243/16" (614) 6815/16" (1751)

Backer Panel 2413/16" (630) 699/16" (1767)

FREEZER W H

Overlay Panel 1611/16" (424) 693/4" (1772)

Spacer Panel 1513/16" (402) 6815/16" (1751)

Backer Panel 167/16" (418) 699/16" (1767)

GRILLE W H


Backer Panel 413/4" (1060) 815/16" (227)

BI-42SD W H


A B

Cut-Out Location 2" (51) 2813/16" (732)

Model BI-36S

REFRIGERATOR W H

Overlay Panel 201/16" (510) 693/4" (1772)

Spacer Panel 193/16" (487) 6815/16" (1751)

Backer Panel 1913/16" (503) 699/16" (1767)

FREEZER W H

Overlay Panel 1511/16" (398) 693/4" (1772)

Spacer Panel 1413/16" (376) 6815/16" (1751)

Backer Panel 157/16" (392) 699/16" (1767)

GRILLE W H


Backer Panel 353/4" (908) 815/16" (227)


This design option allows for a flush door and grille. Stainlesssteel panels are available as sales accessories. Shown withtubular handle option to mirror Wolfbuilt-in ovens.

Flush Inset Application

It is necessary to consider the following points whenplanning for a flush inset application:

• The flush inset depth is 23/16" (56) deeper than thestandard opening.

• The flush inset width is 21/2" (64) wider than thestandard opening.

• The flush inset height is 1/4" (6) higher than thestandard opening.

• Panel widths increase to achieve the flush inset look.

• You must allow a 1/2" (13) reveal around the perimeterof the unit and grille to allow for proper door swing andairflow.

IMPORTANT NOTE: The flush inset application is not aseparate model. This is an overlay unit in a flush installa-tion. The same model is used in an overlay or flush insetapplication.

Rough opening dimensions for the flush inset applicationassume the use of a 3/4" (19) decorative panel. Theillustrations below show the difference between standardand flush inset installations.


24" (610)OPENING

DEPTH

TOP VIEW

Standard installation. Flush inset installation.

263/16"(665)

FLUSHINSETDEPTH

23/16"(56)

11/4"(32)

TOP VIEW

FLUSH INSET INSTALLATIONWITH 3/4" (19) PANEL

24" (610)OPENING

DEPTH


subzero.com/specs

Flush Inset Opening Widths A B

BI-36R, BI-36RG and BI-36F 351/2" (902) 38" (965)

BI-30U and BI-30UG 291/2" (746) 32" (813)

BI-36U and BI-36UG 351/2" (902) 38" (965)

BI-36S 351/2" (902) 38" (965)

BI-42S and BI-42SD 411/2" (1054) 44" (1118)

BI-48S and BI-48SD 471/2" (1206) 50" (1270)

IMPORTANT NOTE: Dimensions assume a 3/4" (19) panelthickness.

IMPORTANT NOTE: If two units are installed side by side,refer to pages 32–36 for dual flush inset installations.


DETAIL A

DETAIL B

FRONT VIEW

AWIDTH TO CLEAT

BFLUSH INSET WIDTH

11/4"(32)

11/4"(32)

SIDE VIEW

84"(2134)FLUSHINSET

HEIGHT

1/4"(6)

24" (610)DEPTH TO CLEAT

263/16" (665)FLUSH INSET DEPTH

23/16"(56)

833/4"(2127)

HEIGHTTO CLEAT

24" (610)DEPTH

TO CLEAT

263/16"(665)

FLUSHINSETDEPTH

TOP VIEW

23/16"(56)

11/4"(32) CLEAT

CLEAT

Detail A

Detail B

11/4"(32)

24" (610)OPENING

DEPTHTO CLEAT

CLEAT

TOP VIEW263/16"(665)

FLUSHINSETDEPTH

23/16" (56)

3" (76)typical

24" (610)OPENINGDEPTH TO

CLEAT

11/4"(32)

23/16" (56)

CLEAT

SHADEDAREA

MUST BEFINISHED

3" typical(76)

4" (102)

Built-In Models

FLUSH INSET INSTALLATION


Flush Inset Panels

The flush inset application allows decorative panels on thefront of the unit to be flush with surrounding cabinetry andis available for all built-in overlay models. For exact paneldimensions, refer to flush inset panel specifications on thefollowing pages.

The flush inset design allows decorative panels to coverthe door trim for a seamless appearance that blends withthe design of the room. The most common way to achievethis look is to work with three panels—the decorative flushinset panel, which is typically 3/4" (19), a .10" (3) spacerpanel and a 1/4" (6) backer panel. Depending on yourcabinet manufacturer, this could also be one panel routedfor different dimensions.

Regardless of the physical construction of the panels(three-panel assembly or routed panel), you will need tofollow the flush inset panel specifications on the followingpages for exact sizing and panel placement to ensure aproper fit.

Flush Inset Panel Requirements



All Other Flush Inset Models 50 lbs (23 kg)


MIN PANEL THICKNESS

All Flush Inset Panels 5/8" (16)1/4" (6).10" (3)

FLUSH INSETPANEL

SPACERPANEL

BACKERPANEL

3/4"(19)

typical

Three-panel assembly.

The illustration below provides a rear view of the three-panel assembly with critical dimensions, standard for allbuilt-in models.

IMPORTANT NOTE: The inside edges of the rough openingas well as the sides and a portion of the back side of thedecorative panels will need to be finished, as they will beexposed when the doors are open.

IMPORTANT NOTE: On glass door models, the edges ofthe overlay, spacer and backer panels of the windowcut-out will need to be finished, as they will be exposed.

IMPORTANT NOTE: For flush inset panels thicker than3/4" (19), a 90˚ door stop may be required to prevent inter-ference with adjacent cabinets. Refer to the full-scale tem-plates at the end of this section.

IMPORTANT NOTE: When installing two units side by sidein a flush inset application, refer to pages 32–36 for dualflush inset installations. Be aware that rough openingdimensions, panel sizes and offsets are different for thisapplication.

Do not exceed flush inset panel dimensions, as thiscould cause damage to panels and the Sub-Zero unit.


subzero.com/specs

5/8"(16)

5/16" (8) 1/2"(13)

FLUSH INSET PANEL

SPACER

BACKER

DOOR / DRAWER / GRILLE

TOP VIEW

CABINETRY

Illus. A Illus. B

1/4" (6)REVEAL

5/16" (8)1/8" (3)

DOOR DOOR

TOP VIEW

1/2" (13)

5/16"(8)

1/8"(3)

CABINETRY

GRILLE

SIDE VIEW

Illus. C Illus. D

1/2" (13)

3/32"(2)

5/16"(8)

5/16"(8)

5/32"(4)

GRILLE

DOOR

SIDE VIEW

5/8" (16)

5/32"(4)

5/16"(8)

5/16"(8)

3/32"(2)

DOOR

DRAWER

SIDE VIEW

Illus. E Illus. F

5/16"(8)

3/32"(2)

DOOR /DRAWER

SIDE VIEW

Panel Offsets Illus.

ALL REFRIGERATOR / ALL FREEZER

Door / Grille Sides AGrille Top CGrille Bottom / Door Top DDoor Bottom F

OVER-AND-UNDER

Door / Drawer / Grille Sides AGrille Top CGrille Bottom / Door Top DDoor Bottom / Drawer Top EDrawer Bottom F

SIDE-BY-SIDE

Doors (hinge) / Grille Sides ADoors (handle) Sides BGrille Top CGrille Bottom / Door Top DDoor Bottom F

Flush Inset Panels

PANEL OFFSETS

Illustrations A–F provide panel offsets and reveals for allbuilt-in models in a flush inset application. Refer to thechart below for reference to the illustrations relating toyour specific model.

For additional information on model-specific panel reveals,visit the specification library section of our website,subzerotrade.com.



Flush Inset Panels


REFRIGERATOR W H

Flush Inset Panel 31" (787) 501/8" (1273)

Spacer Panel 291/8" (740) 495/16" (1253)

Backer Panel 293/4" (756) 4915/16" (1268)

FREEZER W H

Flush Inset Panel 31" (787) 19" (483)

Spacer Panel 291/8" (740) 181/16" (459)

Backer Panel 293/4" (756) 1811/16" (475)

GRILLE W H


Spacer Panel 291/8" (740) 85/16" (211)

Backer Panel 293/4" (756) 815/16" (227)

BI-30UG W H

Window Cut-Out 191/2" (495) 395/8" (1006)

A B

Cut-Out Location 53/4" (146) 51/4" (133)




Spacer Panel 351/8" (892) 6815/16" (1751)

Backer Panel 353/4" (908) 699/16" (1767)

GRILLE W H


Spacer Panel 351/8" (892) 85/16" (211)

Backer Panel 353/4" (908) 815/16" (227)

BI-36RG W H

Window Cut-Out 251/2" (648) 541/8" (1375)

A B

Cut-Out Location 53/4" (146) 103/8" (264)


REFRIGERATOR W H


Spacer Panel 351/8" (892) 495/16" (1253)

Backer Panel 353/4" (908) 4915/16" (1268)

FREEZER W H

Flush Inset Panel 37" (940) 19" (483)

Spacer Panel 351/8" (892) 181/16" (459)

Backer Panel 353/4" (908) 1811/16" (475)

GRILLE W H


Spacer Panel 351/8" (892) 85/16" (211)

Backer Panel 353/4" (908) 815/16" (227)

BI-36UG W H

Window Cut-Out 251/2" (648) 395/8" (1006)

A B

Cut-Out Location 53/4" (146) 51/4" (133)


H

H

W

H

H

W

AA

A

B

H

H

H

W

AA

A

A

H

H

H

W


subzero.com/specs

Flush Inset Panels



REFRIGERATOR W H

Flush Inset Panel 291/4" (743) 693/4" (1772)

Spacer Panel 277/8" (708) 6815/16" (1751)

Backer Panel 281/2" (724) 699/16" (1767)

FREEZER W H


Spacer Panel 181/8" (460) 6815/16" (1751)

Backer Panel 183/4" (476) 699/16" (1767)

GRILLE W H


Spacer Panel 471/8" (1197) 85/16" (211)

Backer Panel 473/4" (1213) 815/16" (227)

DISPENSER (BI-48SD) W H

Cut-Out 57/8" (149) 127/16" (316)

A B

Cut-Out Location 2" (51) 2813/16" (732)


REFRIGERATOR W H


Spacer Panel 243/16" (614) 6815/16" (1751)

Backer Panel 2413/16" (630) 699/16" (1767)

FREEZER W H


Spacer Panel 1513/16" (402) 6815/16" (1751)

Backer Panel 167/16" (418) 699/16" (1767)

GRILLE W H


Spacer Panel 411/8" (1045) 85/16" (211)

Backer Panel 413/4" (1060) 815/16" (227)

DISPENSER (BI-42SD) W H


A B

Cut-Out Location 2" (51) 2813/16" (732)

Model BI-36S

REFRIGERATOR W H


Spacer Panel 193/16" (487) 6815/16" (1751)

Backer Panel 1913/16" (503) 699/16" (1767)

FREEZER W H


Spacer Panel 1413/16" (376) 6815/16" (1751)

Backer Panel 157/16" (392) 699/16" (1767)

GRILLE W H


Spacer Panel 351/8" (892) 85/16" (211)

Backer Panel 353/4" (908) 815/16" (227)


H

H

WW

H

H

WW

B

A


Dispenser

MODELS BI-42SD AND BI-48SD

The refrigerator door panel must include a cut-out toaccommodate the dispenser glasswell and bezel. Thethickness of the panel in this area can range from 1/4" (6)to a maximum of 11/8" (29).

IMPORTANT NOTE: Regardless of the thickness of thepanel for model BI-42SD or BI-48SD, you must plan for aflat landing area for the decorative bezel surrounding theglasswell area. The illustration to the right provides exactbezel dimensions. Refer to the appropriate panel specifi-cations page for exact cut-out location. This landing areacan be accomplished in a number of different ways. Thesephotos show two options.

One option (flush) is to rout the panel so the bezel will beflush with rails and stiles. You must rout a space toaccommodate the height and width of the bezel. Thewidth of the stile immediately to the left of the bezel mustbe 13/4" (44). Do not cut the entire stile to this dimension.

The other option (proud) shows a boxed out landing areafor the bezel using stiles and rails to create this space. Inthis application, the bezel will sit proud of the stiles andrails. The total thickness of the panels at this level mustnot exceed 11/8" (29).

Handle placement.

2"(51)

1"(25)

GLASSWELL

HANDLE

Flush option.

65/16" (160)

3/32"(2)

1/8" (3)RADIUS

5/8"(16)

127/8"(327)

Dispenser dimensions.

Proud option.

For overlay and flush inset models, mounting placement ofthe refrigerator door handle must assure proper access tothe glasswell and adequate clearance under the handle.The handle placement illustration shows the relation of therefrigerator door handle to the glasswell bezel on stainlesssteel models.


subzero.com/specs

Routing detail.

MAINFRAME

SIDE PANELROUTING

1" (25)

17/8" (48)

1/8" (3)

1/2" (13)

Side Panels

Side panels can be used with every design application.When planning for side panels with the installation of abuilt-in model, you need to be aware of the space configu-ration to achieve a pleasing fit. Depending on the exactpanel you are using with your unit, the height of the panelmay vary.

IMPORTANT NOTE: The use of side panels may changethe width of your rough opening.

The side panel will need to be a minimum of 24" (610)deep and 1/2" (13) thick. Refer to the illustrations below forside panel dimensions. Routing will be necessary so thatthe side panel fits flush against the side of the unit.

84"(2134)

24" (610)

ROUT TO3/16" (5)

(OVER-AND-UNDERMODELS)

OPTIONALTOE KICKCUT-OUT

4" (102)

201/2"(521)

53/4"(146)

17/8"(48)

1" (25)

41/4" (108)

ROUT TO 1/8" (3)

FRONTOF SIDEPANEL

25/8"(67)

Side panel dimensions.

IMPORTANT NOTE: If you have a model BI-30U, BI-30UG,BI-36U or BI-36UG, extra routing will be necessary toprevent the panel from hitting the refrigerator lower hingeplate.

When installing a built-in unit with a custom side panel, anaccessory kit (7003407) is required. Stainless steel andwhite enamel side panels are also available through yourauthorized Sub-Zero dealer.


Dual Installation

STANDARD APPLICATION

Two overlay or stainless steel units may be placed side byside in a dual installation. Some standard applications willrequire a dual installation kit, available through yourauthorized Sub-Zero dealer. If you are installing two unitsside by side in a flush inset application, refer to page 32.

A custom filler strip can be used between two units in aframed, overlay or stainless steel design application. It isrecommended that the filler strip be at least 2" (51) wide toprevent condensation between the units. Be sure to addthe filler strip width to your rough opening width. Refer tothe full-scale template on page 42.

Dual installations without a filler strip can only be accom-plished using two units with opposite hinges as shown inillustration A below. The dual installations shown in illus-trations B and C require a filler strip.

IMPORTANT NOTE: For the application shown in illustra-tion A, a dual installation accessory kit is required. Refer topage 36 for information on dual installation kits.

Dual Installation Panel Requirements



All Other Models 50 lbs (23 kg)

Dual Wide Grille Panel 26 lbs (12 kg)

MIN PANEL THICKNESS

Framed Panels 1/4" (6)

Overlay and Flush Inset Panels 5/8" (16)

Illus. A

WITHOUT FILLER STRIP FILLER STRIP REQUIRED FILLER STRIP REQUIRED

Illus. B Illus. C

Dual installation—standard application.


subzero.com/specs

Opening Widths A

Two 30" (762) Models 593/4" (1518)

30" (762) and 36" (914) Models 653/4" (1670)

Two 36" (914) Models 713/4" (1822)

IMPORTANT NOTE: A dual installation kit will be requiredfor this installation.

Stainless steel models are ready to install out of the box.

FRONT VIEWSIDE VIEW

TOP VIEW

833/4"(2127)

OPENINGHEIGHT

AOPENING WIDTH


24" (610)OPENING

DEPTH

TWO UNITS WITH3/4" (19) PANEL

Dual Installation



Dual Installation

FLUSH INSET APPLICATION

Installing two built-in models side by side in a flush insetapplication will require adjustments to the dimensions ofyour finished rough opening, panel sizes and panel offsets.It will also require a dual installation kit, available throughyour authorized Sub-Zero dealer.

Dual installations without a filler strip can only be accom-plished using two units with opposite hinges as shown inillustration A below. The dual installations shown in illus-trations B and C require a filler strip. Refer to the full-scaletemplate on page 43. Illustration A is the only applicationthat will accommodate the dual wide grille.

IMPORTANT NOTE: The application shown in illustration Acan only be achieved by installing dual flush inset panels.Failure to install dual flush inset panels will cause thehandle side of the panels to collide when closing. In thisapplication a dual installation accessory kit is alsorequired.

Dual flush inset panels and dual installation kits are avail-able through your authorized Sub-Zero dealer. Refer topages 34–35 for dual flush inset panel specifications andpage 36 for information on dual installation kits.

Dual installation—flush inset application.

Dual Installation Panel Requirements



All Other Models 50 lbs (23 kg)

Dual Wide Grille Panel 26 lbs (12 kg)

MIN PANEL THICKNESS

Flush Inset Panels 5/8" (16)

Illus. A


Illus. B Illus. C


subzero.com/specs

Opening Widths A B

Two 30" (762) Models 593/4" (1518) 621/4" (1581)

30" (762) and 36" (914) Models 653/4" (1670) 681/4" (1734)

Two 36" (914) Models 713/4" (1822) 741/4" (1886)

IMPORTANT NOTE: Dimensions assume a 3/4" (19) panelthickness. A dual installation kit will be required for thisinstallation.

24" (610)DEPTH

TO CLEAT

263/16"(665)

FLUSHINSETDEPTH

FRONT VIEW

TOP VIEW

23/16"(56)

AWIDTH TO CLEAT

BFLUSH INSET WIDTH

11/4"(32)

11/4"(32)

SIDE VIEW

84"(2134)FLUSHINSET

HEIGHT

1/4"(6)

24" (610)DEPTH TO CLEAT

263/16" (665)FLUSH INSET DEPTH

23/16"(56)

833/4"(2127)

HEIGHTTO CLEAT

CLEAT

TWO UNITS WITH3/4" (19) PANEL

DETAIL A

DETAIL B

11/4"(32) CLEAT

Detail A

Detail B

11/4"(32)

24" (610)OPENING

DEPTHTO CLEAT

CLEAT

TOP VIEW263/16"(665)

FLUSHINSETDEPTH

23/16" (56)

3" (76)typical

24" (610)OPENINGDEPTH TO

CLEAT

11/4"(32)

23/16" (56)

CLEAT

SHADEDAREA

MUST BEFINISHED

3" typical(76)

4" (102)

Dual Installation

FLUSH INSET INSTALLATION


Dual Installation

FLUSH INSET PANEL OFFSETS

When installing two built-in models side by side in a flushinset application, you must decrease the width of the dec-orative flush inset panels by 1/2" (13). Adjustments to thepanel offsets will also need to be made. These adjust-ments are needed to achieve a proper fit and to ensure thepanels do not collide when closing. Panel dimensions inthe chart below have been adjusted to reflect thedecrease in panel dimensions.

IMPORTANT NOTE: If a filler strip is not used, dual instal-lations can only be accomplished using two units withopposite hinges.

Illustrations A–F provide panel offsets and reveals for allbuilt-in models in a flush inset application. Refer to thechart below for reference to the illustrations relating toyour specific model. All reveals are 1/2" (13) unless other-wise specified.

For additional information on model-specific panel reveals,visit the specification library section of our website,subzerotrade.com.

5/8"(16)

5/16" (8) 1/2"(13)

FLUSH INSET PANEL

SPACER

BACKER


TOP VIEW

CABINETRY

Illus. A Illus. B

DUALTRIM

1/4" (6)REVEAL

5/16" (8)1/8" (3)

DOOR DOOR

TOP VIEW

1/2" (13)

5/16"(8)

1/8"(3)

CABINETRY

GRILLE

SIDE VIEW

Illus. C Illus. D

1/2" (13)

3/32"(2)

5/16"(8)

5/16"(8)

5/32"(4)

GRILLE

DOOR

SIDE VIEW

5/8" (16)

5/32"(4)

5/16"(8)

5/16"(8)

3/32"(2)

DOOR

DRAWER

SIDE VIEW

Illus. E Illus. F

5/16"(8)

3/32"(2)

DOOR /DRAWER

SIDE VIEW


ALL REFRIGERATOR / ALL FREEZER

Doors (hinge) / Grille Sides ADoors (handle) Sides BGrille Top CGrille Bottom / Door Top DDoor Bottom F

OVER-AND-UNDER

Doors (hinge) / Drawer / Grille Sides ADoors (handle) Sides BGrille Top CGrille Bottom / Door Top DDoor Bottom / Drawer Top EDrawer Bottom F



subzero.com/specs

Grille panel dimensions listed are for a standard 84" (2134)finished height. For an 83" (2108) finished height, subtract 1"(25) from grille panel height dimensions. For an 88" (2235)finished height, add 4" (102) to height dimensions. Widthdimensions do not vary.

For dual wide grilles, refer to page 36.

BI-30U and BI-30UG

REFRIGERATOR W H


Spacer Panel 291/8" (740) 495/16" (1253)

Backer Panel 293/4" (756) 4915/16" (1268)

FREEZER W H

Flush Inset Panel 301/2" (775) 19" (483)

Spacer Panel 291/8" (740) 181/16" (459)

Backer Panel 293/4" (756) 1811/16" (475)

GRILLE W H


Spacer Panel 291/8" (740) 85/16" (211)

Backer Panel 293/4" (756) 815/16" (227)

BI-30UG W H

Window Cut-Out 19" (483) 395/8" (1006)

A B

Cut-Out Location 53/4" (146) 51/4" (133)

BI-36R, BI-36RG and BI-36F



Spacer Panel 351/8" (892) 6815/16" (1751)

Backer Panel 353/4" (908) 699/16" (1767)

GRILLE W H


Spacer Panel 351/8" (892) 85/16" (211)

Backer Panel 353/4" (908) 815/16" (227)

BI-36RG W H

Window Cut-Out 25" (635) 541/8" (1375)

A B

Cut-Out Location 53/4" (146) 103/8" (264)

BI-36U and BI-36UG

REFRIGERATOR W H


Spacer Panel 351/8" (892) 495/16" (1253)

Backer Panel 353/4" (908) 4915/16" (1268)

FREEZER W H

Flush Inset Panel 361/2" (927) 19" (483)

Spacer Panel 351/8" (892) 181/16" (459)

Backer Panel 353/4" (908) 1811/16" (475)

GRILLE W H


Spacer Panel 351/8" (892) 85/16" (211)

Backer Panel 353/4" (908) 815/16" (227)

BI-36UG W H

Window Cut-Out 25" (635) 395/8" (1006)

A B

Cut-Out Location 53/4" (146) 51/4" (133)

Dual Installation—Flush Inset Panels


H

H

W

H

H

W

AA

A

B

H

H

H

W

AA

A

A

H

H

H

W


Dual Installation Kit

INSTALLATION WITH DUAL WIDE GRILLE

This kit will replace the existing grilles that ship with theunits and span the entire width of both units. The kitincludes a 1/4" (6) center trim strip (required for properinstallation of the dual wide grille), heater, dual kickplateand mounting hardware. Dual wide grilles are available forall built-in models and design applications. The overlaydual installation kit with grille will accept overlay and dualflush inset panels. For dual wide grille panel dimensions,refer to the panel specifications below for your designapplication. Grille panel dimensions listed are for astandard 84" (2134) finished height.

INSTALLATION WITH INDIVIDUAL GRILLES

This kit is available for those who choose to utilize theindividual grilles that ship with each unit. The kit includes a1/4" (6) filler strip (which fills the reveal between the unitsand grilles), heater and mounting hardware. This dualinstallation kit is not required if a custom filler strip is used.The filler strip should be a minimum of 2" (51) wide. Referto the full-scale template on page 41 for more information.

Dual Wide Grille—Overlay

TWO 30" (762) MODELS W H

Overlay Panel 601/4" (1530) 91/4" (235)

Spacer Panel 593/8" (1558) 85/16" (211)

Backer Panel 60" (1524) 815/16" (227)

30" (762) AND 36" (914) MODELS W H

Overlay Panel 661/4" (1683) 91/4" (235)

Spacer Panel 653/8" (1661) 85/16" (211)

Backer Panel 66" (1676) 815/16" (227)


Overlay Panel 721/4" (1835) 91/4" (235)

Spacer Panel 713/8" (1813) 85/16" (211)

Backer Panel 72" (1829) 815/16" (227)

Dual Wide Grille—Flush Inset



Spacer Panel 593/8" (1558) 85/16" (211)

Backer Panel 60" (1524) 815/16" (227)

30" (762) AND 36" (914) MODELS W H


Spacer Panel 653/8" (1661) 85/16" (211)

Backer Panel 66" (1676) 815/16" (227)



Spacer Panel 713/8" (1813) 85/16" (211)

Backer Panel 72" (1829) 815/16" (227)


subzero.com/specs

Standard Handle Lengths

ALL REFRIGERATOR / ALL FREEZER AND SIDE-BY-SIDE DOOR

Tubular Handle 637/8" (1622)

Pro Handle 451/8" (1146)

Stud Spacing 437/8" (1114)

BI-30U AND BI-30UG DOOR DRAWER

Tubular Handle 441/4" (1124) 245/16" (633)

Pro Handle 371/2" (952) 21" (533)

Stud Spacing 361/4" (921) 165/16" (414)

BI-36U AND BI-36UG DOOR DRAWER

Tubular Handle 441/4" (1124) 305/16" (770)

Pro Handle 371/2" (952) 231/2" (597)

Stud Spacing 361/4" (921) 225/16" (567)

Accessories

These optional accessories are available through yourauthorized Sub-Zero dealer. For local dealer information,visit the showroom locator section of our website,subzero.com.

• Flush inset front panels in stainless steel with handleoptions.

• Framed front panels in stainless steel and whiteenamel.

• Side panels in stainless steel and white enamel.

• Grilles for an 83" (2108) or 88" (2235) finished height.

• Extended framed handles.

• Tubular and pro handles to match the style of Wolfovens and ranges.

• Dual installation kits with and without dual wide grille.

• Retrofit kits for use with 600 series panels.

• Partial framed kit for dispenser models.

STANDARD HANDLE LENGTHS

Refer to the chart below for standard lengths of tubular,and pro handles used on built-in models.


Framed Panel Thickness

FULL-SCALE TEMPLATE

OPTIONAL EXTENDEDFULL-LENGTH HANDLE

STANDARDFULL-LENGTH HANDLE

1/4" (6) FRAMED PANEL

DOOR

1"(25)

3"(76)

11/4" (32) PANEL

1" (25) PANEL

1/2" (13) PANEL

3/4" (19) PANEL

2"(51)

PANEL THICKNESSFRAMED APPLICATION


subzero.com/specs

1/4" (6) BACKER PANEL

DOOR

DEPTH OF TUBULAR, CURVEDAND PRO HANDLES

1"(25)

3"(76)

11/4" (32) PANEL

1" (25) PANEL

3/4" (19) PANEL

2"(51)

.10" (3) SPACER PANEL

Overlay Panel Thickness

FULL-SCALE TEMPLATE

Overlay and flush inset panels must be a minimum of 5/8"(16) thick to support mounting the handle. Panel thicknessdoes not include backer and spacer panel. Mount handleclose to the opening edge of the door.

PANEL THICKNESSOVERLAY AND FLUSH INSET APPLICATIONS


237/8" (606)TO REAR OF UNIT

OVERALL WIDTH OF UNIT

11/4" (32)

11/2" (38)

13/4" (44)

0" (0)

1" (25)

2" (51)

21/4" (57)

21/2" (63)

23/4" (70)

3" (76)

31/4" (83)

31/2" (89)

1/4" (6)

1/2" (13)

3/4" (19)

3/4" (19) THICKOVERLAY PANEL

(TYPICAL)

1/4" (6) BACKERPANEL

1" (25) THICKPANEL

Overlay Application

FULL-SCALE TEMPLATE

DOOR OPENING 90°TOP VIEW

1" (25)0"

SCALE


subzero.com/specs

11/4" (32)

ASSUMES3/4" (19)

FLUSH INSETPANEL

THICKNESS

23/16" (56)

24" (610)TO BACK WALL

3/4" (19) THICKFLUSH INSET PANEL

(TYPICAL)

1/4" (6) BACKERPANEL

1" (25) THICKPANEL

Flush Inset Application

FULL-SCALE TEMPLATE

For panels thicker than 3/4" (19),a 90˚ door stop may be requiredto prevent interference withadjacent cabinets.


1" (25)0"

SCALE


11/4" (32)

FILLER STRIP

APPROX PROFILE OFSTAINLESS STEEL WRAPPED

DOOR AND HANDLE

DOOROPEN 110°

DOORCLOSED

Dual Installation—Standard

FULL-SCALE TEMPLATE

Typical framed, overlay or stainless steeldual installation with filler strip atmaximum 110° door opening. Dependingon panel thickness, a 90˚ door stop maybe required.

STANDARDTOP VIEW

1" (25)0"

SCALE


subzero.com/specs

11/2" (38)

1/2" (13)

FILLER STRIP

PROFILE OF 3/4" (19) FLUSH INSET PANELAND TUBULAR HANDLE

DOORCLOSED

DOOROPEN 110°Dual Installation—Flush Inset

FULL-SCALE TEMPLATE

Typical flush inset dual installation withfiller strip at maximum 110° dooropening. Depending on panel thickness,a 90˚ door stop may be required.

FLUSH INSETTOP VIEW

1" (25)0"

SCALE

MODEL 648PRO

PRO 48 Refrigeration 45

subzero.com/specs

PRO 48 Refrigeration. Freshness finds unmistakable expression in the Sub-Zero PRO 48. An 800-pound monumentto food preservation—equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like itsbold exterior, is crafted of stainless steel. The PRO 48 is available with or without a glass door and may be either built in orfreestanding.

48"(1219)

84"(2134)

48"(1219)

84"(2134)

648PRO 648PROG

PRO 48 MODELS KEY FEATURES

• Can be used freestanding or installed as a standard orflush built-in application.

• Handles coordinate with handles of Wolf ranges.

• Stainless steel interior as well as exterior.

• Dual refrigeration system enhanced with triple evapora-tors allow independent control of storage conditions inrefrigerator cabinet and drawer compartments.

• Advanced water filtration system.

• Exterior temperature display.

• Flip-up grille provides easy access for quick routinemaintenance.

• Star-K certified.


48" (1219)

84"(2134)

257/8" (657)

303/16" (767)

4" (102)

301/2"(775)

237/8"(606)

421/8"(1070)

141/2"(368)

303/4"(781)

21" (533)

23/8" (60)


MODELS 648PRO AND 648PROG

PRO 48 Models

OVERALL DIMENSIONS

SPECIFICATIONS

Capacity / Weight

INTERIOR CAPACITY R CU FT (L) F CU FT (L)

648PRO and 648PROG 18.4 (521) 11.7 (331)

SHIPPING WEIGHT LBS (KG)

648PRO 860 (390)

648PROG 875 (397)


subzero.com/specs

OPENINGDEPTH

FRONT VIEWSIDE VIEW

TOP VIEW

OPENINGWIDTH

OPENINGDEPTH

OPENINGHEIGHT

IMPORTANT NOTE: For standard built-in installations, theface frame of the unit will extend 2" (51) beyond cabinetry.In flush built-in installations, the front of the face frame will beflush with surrounding cabinetry.

Opening Dimensions Standard Flush

Opening Width 471/2" (1206) 48" (1219)

Opening Height 833/4" (2127) 841/8" (2137)

Opening Depth 24" (610) 26" (660)

PRO 48 Models

STANDARD AND FLUSH BUILT-IN INSTALLATIONS


PRO 48 models can be used freestanding or installed as astandard or flush built-in application. For standard built-ininstallations, the face frame of the unit will extend 2" (51)beyond cabinetry. In flush built-in installations, the front ofthe face frame will be flush with surrounding cabinetry.


For PRO 48 models, the electrical supply should belocated within the shaded area shown in the illustrationbelow. Follow the National Electrical Code and local codesand ordinances when installing the receptacle. A separatecircuit, servicing only this appliance, is required. A groundfault circuit interrupter (GFCI) is not recommended andmay cause interruption of operation.







PRO 48 models come with an automatic ice maker and anintegrated water filtration system. The water supply lineshould be located within the shaded area shown in theillustration below. The water supply line should be con-nected to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not useself-piercing valves. A saddle valve kit (4200880) is avail-able through your authorized Sub-Zero dealer. The waterline must not interfere with installation of the anti-tipbrackets.

IMPORTANT NOTE: A reverse osmosis system can beused provided there is constant water pressure of 35 psi(2.4 bar) to 120 psi (8.3 bar) supplied to the unit at alltimes. In this application, the integrated water filtrationsystem must be set to bypass mode. This is achieved byremoving the water filter cartridge. Refer to the PRO 48installation guide packed with the unit for detailedinstructions.





3" (76)

FRONT VIEW

FLOOR

53/16"(132)

6"(152)

Location of water supply.

FRONT VIEW


7"(178) E

6"(152)



subzero.com/specs

Accessories


• Freestanding kit, which contains two stainless steelside panels and top lid.

• Stainless steel side panel.

• Refrigerator drawer dividers for compartmentalizedstorage.

• Stainless steel slide-out refrigerator bin.

• Dozen egg container.

• 90° door stop.

MODELS IC-27F, 427G (WINE) AND IC-27R

Integrated Refrigeration 51

subzero.com/specs

Integrated Refrigeration. With custom cabinet fronts and hardware, Sub-Zero invented integrated columns, drawersand tall units that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration aspractical and beautiful in the master suite, bar or theatre room as in the kitchen.

36"(914)

80"(2032)

36"(914)

80"(2032)

36"(914)

80"(2032)

736TR 736TFI 736TCI

27"(686)

80"(2032)

27"(686)

80"(2032)

27"(686)

80"(2032)

700TR 700TFI 700TCI

341/2"(876)

27"(686)

341/2"(876)

27"(686)

341/2"(876)

27"(686)

700BR 700BF(I) 700BC(I)

KEY FEATURES

• Custom cabinet fronts and hardware allow for infinitedesign options.

• Point-of-use refrigeration that can be placed anywhere

in the home.

• Dual refrigeration; two compressors preserve food’sgoodness in self-contained compartments.


qualified.

• Drawer models are Star-K certified.

INTEGRATED MODELS

27"(686)

81"(2057)

27"(686)

81"(2057)

IC-27RAVAILABLE2ND QUARTER 2010

IC-27FIAVAILABLE2ND QUARTER 2010


MODELS IC-27R AND IC-27FI

27" (686)

14"(356)

15/8"(41)

24"(610)

81"(2057)

TO TOP OFOPENNG

24" (610)

789/16"(1995)

93/4" (248)

4"(102)1/2" (13) ± ADJUSTMENT IN LEVELING LEGS

251/2"(648)

45/8"(117)

DIMENSIONS WILL VARY WITH PANEL THICKNESS

Overall Dimensions

COLUMN MODELS

MODELS 700TR, 700TFI AND 700TCI

27" (686)

14"(356)

13/16"(21)

341/2"(876)

24"(610)

203/8"(518)

101/4"(260)

131/4"(337)


1/2"(13)

3/8"(10)

191/2"(495)

251/2"(648)

45/8"(117)

80"(2032)

TO TOP OFOPENNG

24" (610)

789/16"(1995)

93/4"(248)

4"(102)HEIGHT DIMENSIONS ±1/2" (13)

27" (686) TALL MODELS

Overall dimensions do not include panels or handles.


subzero.com/specs

MODELS 736TR, 736TFI AND 736TCI

36" (914)

14"(356)

80"(2032)

TO TOP OFOPENNG

24" (610)

15/16"(33)

7713/16"(1976)

341/2"(876)

24"(610)

203/8"(518)

101/4"(260)

131/4"(337)

93/4"(248)

4"(102)


1/2"(13)

3/8"(10)

191/2"(495)

341/2"(876)

7" (178)

HEIGHT DIMENSIONS ±1/2" (13)

Overall Dimensions



Interior Capacity R cu ft (L) F cu ft (L)

COLUMN MODELS

IC-27R 16.2 (459)

IC-27FI 16.3 (462)


700TR 15.5 (439)

700TFI 15.3 (433)

700TCI 10.2 (289) 5.1 (144)


736TR 20.9 (592)

736TFI 21.5 (609)

736TCI 13.3 (377) 7.1 (201)

27" (686) DRAWER MODELS

700BR 5.3 (150)

700BF(I) 5.1 (144)

700BC(I) 2.9 (82) 2.1 (59)

Capacity and Weight


IC-27R, IC-27FI, 700TR, 700TFI and 700TCI 360 (163)

736TR, 736TFI and 736TCI 480 (218)

700BR, 700BF(I) and 700BC(I) 190 (86)

MODELS 700BR, 700BF(I) AND 700BC(I)

27" (686)

341/2"(876)

24"(610)

203/8"(518)


1/2"(13)

3/8"(10)

191/2"(495)

257/8" (657)

24" (610)

93/4" (248)

4"(102)

101/4"(260)

131/4"(337)

HEIGHT DIMENSIONS ±1/2" (13)

Overall Dimensions

DRAWER MODELS


subzero.com/specs

IMPORTANT NOTE: The depth of each integrated model is24" (610) from the front of the unit to its back. Your designmay necessitate moving the unit back or cabinets forward toachieve a flush fit. This will require a minimum rough openingdepth of 25" (635).25" (635)

OPENINGDEPTH

AOPENING WIDTH


BOPENINGHEIGHT

TOP VIEW

FRONT VIEWSIDE VIEW

Opening Dimensions

INTEGRATED MODELS

Opening Dimensions A B

IC-27R and IC-27FI 27" (686) 81" (2057)

700TR, 700TFI, 700TCI 27" (686) 80" (2032)

736TR, 736TFI, 736TCI 36" (914) 80" (2032)

700BR, 700BF(I), 700BC(I) 27" (686) 341/2" (876)



The electrical supply should be located within the shadedarea shown in the illustrations. Follow the NationalElectrical Code and local codes and ordinances wheninstalling the receptacle. A separate circuit, servicing onlythis appliance, is required. A ground fault circuit inter-rupter (GFCI) is not recommended and may cause inter-ruption of operation.

IMPORTANT NOTE: It is critical that the electrical outlet belocated within the shaded area shown so it does not inter-fere with installation of the anti-tip bracket. It must beflush with the back wall and positioned with the groundingprong to the right of the thinner blades.





13" (330)

1/4" (6)

41/2"(114)

POSITION OUTLET WITHGROUNDING PRONG

TO THE RIGHT

FLOOR

21/2" (64)

FRONT VIEW

27" (686) models. 36" (914) models.

171/2" (445)

41/2"(114)


TO THE RIGHT

FRONT VIEW

FLOOR

21/2" (64)

1/4" (6)


subzero.com/specs


For integrated models with an automatic ice maker, thewater supply line should be located through the floor orback wall, within the shaded area shown in the illustra-tions. The water supply line should be connected to thehouse supply with an easily accessible shut-off valvebetween the supply and the unit. Do not use self-piercingvalves. A saddle valve kit (4200880) is available throughyour authorized Sub-Zero dealer.

IMPORTANT NOTE: It is critical that the water line belocated within the shaded area shown so it does not inter-fere with installation of the anti-tip bracket.

An in-line filter is required when water conditions have ahigh sediment content. The ice maker operates onconstant water pressure between 20 psi (1.4 bar) and100 psi (6.9 bar).

IMPORTANT NOTE: In some cases, a reverse osmosiswater filter system may not be able to maintain theminimum pressure consistently.





3" (76)

9"(229)

3/4"(19)

FLOOR

21/2" (64)

FRONT VIEW

27" (686) models.

9"(229)

6"(152)

TOP VIEW

11/2"(38)

21/2"(64)

BACKWALL

131/2"(343)

3" (76)

FRONT VIEW

3/4"(19)

FLOOR

21/2" (64)

36" (914) models.

131/2"(343)

TOP VIEW

6"(152) 11/2"

(38)

21/2"(64)

BACKWALL


A

A

A

453/8"(1153)

263/4" (679)PANEL WIDTH

139/16"(345)

1611/16"(424)

4" (102)

797/8"(2029)

341/2"(876)

A

A

A

453/8"(1153)


139/16"(345)

1611/16"(424)

27" (686)FINISHED OPENING

4" (102)


797/8"(2029)

ALL REVEALS (A) ARE 1/8" (3).

A

767/8"(1953)


4" (102)

807/8"(2054)


Panel dimensions are based on a 1/8" (3) reveal. A reveal of upto 1/4" (6) is possible with adjustments to panel dimensions.

27" (686) MODELSTALL AND DRAWER MODELS

36" (914) MODELSTALL MODELS

Typical Panel Dimensions

COLUMN MODELS W H

Door 263/4" (679) 767/8" (1953)

27" (686) MODELS W H

Door 263/4" (679) 453/8" (1153)

Top Drawer 263/4" (679) 139/16" (345)

Bottom Drawer 263/4" (679) 1611/16" (424)


Door 353/4" (908) 453/8" (1153)

Top Drawer 353/4" (908) 139/16" (345)

Bottom Drawer 353/4" (908) 1611/16" (424)

Cabinetry Applications

FRAMELESS CABINETRY

COLUMN MODELS


subzero.com/specs


DOOR PANEL HEIGHT

The height of the door panel can extend beyond thetypical panel height, provided you do not exceed the panelweight limit. The illustration below shows how the panelmay be extended and what you need to consider to finishthe area behind the door panel.

IMPORTANT NOTE: The decorative valance used to finishthe area behind the door panel must stay behind the frontplane of the finished molding.

INTEGRATED UNIT(SIDE VIEW)

11/2"(38)

25" (635) TO WALL

HINGE

DECORATIVE VALANCECANNOT EXTEND BEYOND

THE FRONT OF THE MOLDING

DECORATIVE VALANCE

REMOVABLE MOLDING

TYPICALHEIGHT

OF DOORPANEL

MINIMUMHEIGHT

OVERALLHEIGHT

1/8"(3)

1/8"(3)

DOORPANEL

25" (635) TO WALL

HEIGHTOF PANEL

INTEGRATED UNIT(SIDE VIEW)

25/8" (67) TO 4" (102)

BASE MOLDINGMUST BE

REMOVABLE

KICKPLATE/GRILLECAN BE ADJUSTED

FORWARD

KICKPLATE/GRILLE

4" (102) TO 9" (229)FROM FLOOR

TOE KICK CLEARANCE

The toe kick clearance can vary with the height of thepanel. You must keep a minimum space of 4" (102) clearbelow the bottom edge of the panel for proper venting. Inaddition, any decorative base molding must be removableto clean the condenser and for service.

UPPER VALANCECOLUMN AND TALL MODELS

KICKPLATE/GRILLE AREAALL INTEGRATED MODELS



Integrated refrigeration is compatible with virtually anystyle and look of cabinetry. These models can be usedwith framed as well as frameless cabinetry. Because of theprecise application and the look you may want to achieve,keep the following considerations in mind:

The thickness of the front panels can vary. A minimum 5/8"(16) thick panel is required, but the thickness can beincreased provided the panel weight limit is not exceeded.

IMPORTANT NOTE: The depth of each integrated model is24" (610) from the front of the unit to its back. You mustallow for the thickness of the panel you are applying whenplanning for the finished rough opening depth if you wantthe front panel to be flush with surrounding cabinetry. Youmay have to move the unit back into drywall or bring thecabinets forward to achieve a flush fit.

Reveals between panels can vary. A reveal of 1/8" (3) istypical, but reveals can be increased to up to 1/4" (6).

When 3/4" (19) or thicker panels are used with a revealof less than 1/4" (6), door panels may cause damage tothe unit when the door is opened to the maximum 105°.Use the built-in 90° door stop.

As reveals between cabinetry and the unit decrease,the potential exists for severe finger pinching while thedoor is closing.

IMPORTANT NOTE: The inside edges of the rough openingas well as the sides and a portion of the backside of thedecorative panels will need to be finished, as they will beexposed when the doors are open.

D-style handles are recommended. For the cabinet door,handles must be located near the edge of the panelopposite the hinge, centered top to bottom. Locatehandles in the top center area of the drawer panels.

Illustrations on the following pages show typical applica-tions of frameless and framed cabinetry. Also refer to thefull-scale illustration at the end of this section for specificson door openings.

Panel Requirements

COLUMN MODELS MAX WEIGHT

Door Panel 65 lbs (29 kg)

TALL AND DRAWER MODELS MAX WEIGHT

27" (686) Door Panel 40 lbs (18 kg)

27" (686) Drawer Panel 12 lbs (5 kg)

36" (914) Door Panel 53 lbs (24 kg)

36" (914) Drawer Panel 16 lbs (7 kg)

PANEL THICKNESS MINIMUM

All Panels 5/8" (16)


subzero.com/specs

Dual Installations

Two integrated units may be placed side by side in a dualinstallation. Panel width dimensions will vary slightly fromsingle installations. Refer to the chart below for typicalpanel dimensions.

A dual installation kit is required for installations with 2"(51) or less space between the units. Dual installation kitsare available through your authorized Sub-Zero dealer.

IMPORTANT NOTE: If a 27" (686) unit is installed next to a36" (914) tall unit, the decorative front panels will align,however, the face frames will not. This is only apparentwhen both doors are open at the same time. Due to amore robust hinge on 36" (914) units, the face frame wasreconfigured to maintain a consistent overall panel height.

Panel dimensions are based on a 1/8" (3) reveal. A reveal of upto 1/4" (6) is possible with adjustments to panel dimensions.

Typical Panel Dimensions

COLUMN MODELS W H

Door 2613/16" (681) 767/8" (1953)


Door 2613/16" (681) 453/8" (1153)

Top Drawer 2613/16" (681) 139/16" (345)

Bottom Drawer 2613/16" (681) 1611/16" (424)


Door 3513/16" (910) 453/8" (1153)

Top Drawer 3513/16" (910) 139/16" (345)

Bottom Drawer 3513/16" (910) 1611/16" (424)

25" (635)OPENING

DEPTH

TOP VIEW

54" (1372) OR 72" (1829)OPENING WIDTH

Dual installation opening.


The illustrations below show typical applications of framedand frameless cabinetry. Refer to the full-scale templatesat the end of this section for specifics on door openings.

DOOR

1/8" (3)REVEAL FINISHED

OPENING

INTEGRATEDUNIT

CABINET

PANEL

Framed—full overlay. Framed—standard overlay.

1/8" (3)REVEAL FINISHED

OPENING

INTEGRATEDUNIT

DOOR

CABINET

PANEL

DOOR

CABINET

FINISHEDOPENING

UNIT

PANEL

1/8" (3)REVEAL

Framed—beaded inset. Frameless cabinetry.

FINISHEDOPENING

DOOR

INTEGRATEDUNIT

CABINET

PANEL

1/8" (3)REVEAL



COLUMNS DOOR


Pro Handle 391/2" (1003)


27" (686) MODELS DOOR DRAWER

Tubular Handle 417/16" (1053) 23" (584)

Pro Handle 391/2" (1003) 21" (533)

Stud Spacing 383/8" (975) 193/4" (502)

36" (914) MODELS DOOR DRAWER

Tubular Handle 417/16" (1053) 32" (762)

Pro Handle 391/2" (1003) 30" (533)

Stud Spacing 383/8" (975) 283/4" (730)

Accessories


• Stainless steel front panels with handles.


• Crisper drawer with shelf assembly, deli drawer withshelf and crisper cover with lid for certain models.

• Dual installation kit.

• Harness kit for Star-K compliance.


Refer to the chart below for standard lengths of tubularand pro handles used on integrated models.


subzero.com/specs

1/8" (3) MINIMUM REVEAL

LINE OF INTERFERENCE

SIDE MOLDING ANDINSTALLATION HARDWARE

INTEGRATED DOOR CLOSED

MOUNTING BRACKET

FRAMED PANEL

LINE OF INTERFERENCEMAXIMUM 105° OPENING

3/4" (19)

INTEGRATEDDOOR

MAXIMUM 105° OPENING

LINE OFINTERFERENCE

Maximum Door Opening

FULL-SCALE TEMPLATE

If the panel is thicker than 3/4" (19), use the built-in 90˚door stop to prevent damage to the panel and face frameat the maximum door opening.

105° OPENINGTOP VIEW—1/4 SCALE

DOOR CLOSEDTOP VIEW—FULL-SCALE

1" (25)0"

SCALE

MODEL WS-30

Wine Storage 65

subzero.com/specs

Wine Storage. Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed toensure better wine preservation. Cherrywood-faced shelves, soft lighting, custom cabinetry if desired—Sub-Zero helpsmake a wine collection an element of beauty in the home.

27"(686)

80"(2032)

30"(762)

84"(2134)

27"(686)

80"(2032)

427G 427RG WS-30

341/16"(865)

151/8"(384)

241/4"(616)

343/16"(868)

34"(864)

237/8"(606)

315W 424G 424FS

KEY FEATURES

• Integrated, overlay, flush inset and stainless steeldesign options.

• Full-view glass door standard on all models.

• Freestanding model 424FS does not require panels orsurrounding cabinetry.

• Discreet interior lighting with illuminated display shelf.

WINE STORAGE MODELS

• Two independent storage zones maintain temperature,humidity and UV protection.

• Cherrywood shelf fronts display the wine beautifully.

• Rust-proof metal shelves accommodate 750 mlbottles, half-bottles and magnums.

Wine Storage 66

Overall Dimensions

UNDERCOUNTER WINE STORAGE

237/8" (606) 24" (610)

34"(864)

253/8"(645)

4" (102)

23/8" (60)

MODELS 424GMODEL 315W

151/8" (384) 24" (610)

341/16"(865)

165/8"(422)

4" (102)

23/8" (60)

Overall dimensions are based on stainless steel panelsand handles.

Wine Storage 67

subzero.com/specs

Overall Dimensions

FULL-SIZE WINE STORAGE

MODELS 427G MODELS 427RGWITH REFRIGERATOR DRAWERS

27" (686)

14"(356)

13/16"(21)

80"(2032)

OPENINGHEIGHT

24" (610)

789/16"(1995)

815/16"(227)


24"(610)


251/2"(648)

45/8"(117)

27" (686)

14"(356)

13/16"(21)

341/2"(876)

203/8"(518)

101/4"(260)

131/4"(337)

1/2"(13)

3/8"(10)

80"(2032)

OPENINGHEIGHT

24" (610)

789/16"(1995)

93/4"(248)


24"(610)


191/2"(495)

251/2"(648)

45/8"(117)

Overall dimensions do not include panels or handles.

Wine Storage 68

Storage Capacity Bottles (750 ml) R cu ft (L)

315W 26

424G 46

427G 132

427RG 78 5.3 (150)

WS-30 147


315W 118 (54)

424G 195 (88)

424FS 220 (100)

427G 395 (179)

427RG 410 (186)

WS-30 445 (202)

Capacity and Weight

30" (762)

84"(2134)

24" (610)

4" (102)

733/4"(1873)

237/8"(606)

311/4"(796)

17"(432)

237/8" (606)

23/8" (60)


MODEL WS-30

Overall dimensions are based on the stainless steel model.For flush inset applications, add 1/2" (13) to door clearancedimensions.

Overall Dimensions


Wine Storage 69

subzero.com/specs

Opening Dimensions

UNDERCOUNTER WINE STORAGE

Opening Width A

315W 151/4" (387)

424G 24" (610)

24" (610)OPENING

DEPTH

AOPENING WIDTH


341/2" (876)OPENINGHEIGHT

TOP VIEW

FRONT VIEWSIDE VIEW

IMPORTANT NOTE: The depth of each integrated model is24" (610) from the front of the unit to its back. Your designmay necessitate moving the unit back or cabinets forward toachieve a flush fit. This will require a minimum rough openingdepth of 25" (635).

25" (635)OPENING

DEPTH

27" (686)OPENING WIDTH


80" (2032)OPENINGHEIGHT

TOP VIEW

FRONT VIEWSIDE VIEW

MODELS 427G AND 427RG

MODELS 315W AND 424G


Wine Storage 70


24" (610)OPENING

DEPTH

FRONT VIEWSIDE VIEW

TOP VIEW

291/2" (746)OPENING WIDTH


833/4"(2127)

OPENINGHEIGHT

MODEL WS-30

Opening Dimensions



All wine storage models must be installed so that the doorcan open a minimum of 90˚ or you will have problemspulling the wine shelves out. For corner installations, youneed to allow for a minimum 3" (76) filler so the door canopen to 90˚. If you are using larger-handle hardware, youwill also need to take that into account. Refer to doorclearance specifications.

For a maximum 90˚ door opening, use the door stop builtinto the hinge system of model 427G. A 90˚ door stop isshipped with model WS-30.

If you will be connecting the unit to a home securitysystem, you must allow a minimum of 36" (914) of thesystem’s wiring to be routed in the electrical area desig-nated for your model.

Wine Storage 71

subzero.com/specs


DUAL INSTALLATIONS

If you are installing a wine storage unit next to an existingSub-Zero unit, you may have to allow for a filler strip.

If you are installing a model 427G or 427RG next to anexisting integrated unit, with 2" (51) or less between theunits, an optional heater kit will need to be installed toprevent moisture from forming between the units. Theseoptional heater kits are available through your authorizedSub-Zero dealer. For local dealer information, visit theshowroom locator section of our website, subzero.com.


The electrical supply should be located within the shadedarea shown in the illustration for your specific model.Follow the National Electrical Code and local codes andordinances when installing the receptacle. A separatecircuit, servicing only this appliance, is required. A groundfault circuit interrupter (GFCI) is not recommended andmay cause interruption of operation.





FRONT VIEW

151/2"(394)

3" (76)

2" (51)

Models 315W and 424G. Models 427G and 427RG.

13" (330)

1/4" (6)

41/2"(114)


TO THE RIGHT

FLOOR

21/2" (64)

FRONT VIEW

FRONT VIEW


7"(178) E

6"(152)

Model WS-30.

Overlay Panels

MODELS 315W AND 424G

The overlay panel applied to models 315W and 424Gshould not be confused with the built-in overlay panelapplication. The overlay panel will consist of just a frameand would be either the 5/8" (16) or 3/4" (19) thick panelyou may be using. It is affixed directly to the door itselfwith screws through a series of predrilled holes in the doorframe. A backer and spacer panel is not required.

Model 315W and 424G can be installed flush with sur-rounding cabinetry. Depending on the thickness of theoverlay door panel, it may be necessary to install the unitso that it extends 1/4" (6) beyond the front surface of sur-rounding cabinetry. This will prevent interference betweenthe door panel and adjoining cabinetry at the maximum145° door swing. Refer to the full-scale template at theend of this section.

Wine Storage 72

Door Panels

Unless you are installing a stainless steel model, you willneed to provide a frame for the glass door. If you order astainless steel unit, models 315W, 424G, 424FS andWS-30 will be shipped with their panels and hardwareinstalled. For models 427G and 427RG, optional stainlesssteel panels or custom panels will need to be installed.

The glass door is designed to be exposed to room air cir-culation. Decorative overlays on the glass should be keptto a minimum. Also, rails and stiles can be increased insize but should not exceed the cabinet manufacturers’standard width and cannot exceed the overall door paneldimensions listed in the charts.

The back sides of rails and stiles that will be visiblethrough the glass door will need to be finished. Also, theinside edges of the frames must be finished to match thefront surface.

FREESTANDING MODEL 424FS

Model 424FS does not require any panels or surroundingcabinetry. It has a beautiful stainless steel exterior that isdesigned to be used in a freestanding application.

Overlay Panels

PANEL DIMENSIONS W H

315W 15" (381) 301/16" (764)

424G 233/4" (603) 301/16" (764)

MIN WIDTH

Stiles and Rails 21/4" (57)

MAX PANEL WEIGHT

Door Frame (315W) 10 lbs (5 kg)

Door Frame (424G) 10 lbs (5 kg)

MIN PANEL THICKNESS


Wine Storage 73

subzero.com/specs

The height of the door panel for models 427G and 427RGcan extend beyond the typical panel height, provided youdo not exceed the panel weight limit. Refer to specifica-tions on page 59 of the integrated section.

The toe kick area on model 427G cannot be larger than 6"(152), and on model 427RG, no larger than 9" (229). Thetoe kick area for either model cannot be less than 4" (102).

If you are installing an optional lock kit on models 427G or427RG, you may have to order door panels that exceedthe 80" (2032) finished height. Consult the lock kit installa-tion instructions and see if your panels will allow for anadequate installation. These instructions are available onour website, subzero.com.

Panel Requirements

MIN WIDTH

Stiles 21/4" (57)

Top Rail 33/4" (95)

Bottom Rail (427G) 8" (203)

Bottom Rail (427RG) 3" (76)

MAX PANEL WEIGHT

Door Frame 20 lbs (9 kg)

Drawer Panel (427RG) 12 lbs (5 kg)

MIN PANEL THICKNESS


Integrated Panels

427G W H

Door 263/4" (679) 757/8" (1927)

427RG W H

Door 263/4" (679) 453/8" (1153)

Top Drawer 263/4" (679) 139/16" (345)

Bottom Drawer 263/4" (679) 1611/16" (424)

Integrated Panels

MODELS 427G AND 427RG

The integrated full panels or frame panels for glass doorsfor these models will follow some of the identical planningprocesses used with the integrated line. The installation ofthe door panels is completely different, however. Ratherthan using the mounting hardware we used with the inte-grated line, door panels for both models 427G and 427RGwill be applied with screws applied through our door.

The drawer panels for the model 427RG will be appliedusing the integrated technique of mounting brackets.

IMPORTANT NOTE: The depth of models 427G and427RG is 24" (610) from the front of the unit to its back.You must allow for the thickness of the panel you areapplying when planning for the finished rough openingdepth if you want the front panel to be flush with sur-rounding cabinetry. You may have to move the unit backinto the drywall or bring the cabinets forward. Refer to theintegrated section.

Panel dimensions listed in the chart assume the modelsfinish off at 80" (2032) in height overall and have a 4" (102)toe kick for the model 427G. If you finish off at 84" (2134),for instance, you must add an additional 4" (102) to thefinished height of the panel and 4" (102) to the top rail.Likewise, if you allow for a 6" (152) toe kick for the model427G, you must subtract 2" (51) from the bottom rail.

Wine Storage 74

Model WS-30

FRAMED PANEL

If the thickness of the framed panel is less than 1/4" (6), itmust be backed up with a sheet of shim material to buildthe total thickness to 1/4" (6). If the panel is thicker than1/4" (6), a routed edge must be provided around the panelto ensure a proper fit. Refer to the illustration below.

Routing, recessing or an extended handle may be requiredon raised panels for finger clearance under the handle.

IMPORTANT NOTE: Do not cover the glass door with asolid panel. The window cut-out edges of the framedpanel will need to be finished, as they will be exposed.

TRIMREVEAL

1/4" (6) min

MAIN FRAME

ROUT TO1/4" (6)

DOORFRAME

GLASS

Raised framed panel.

WS-30 Framed

DOOR W H

Door Panel 293/4" (756) 699/16" (1767)

WINDOW W H

Cut-Out 231/2" (597) 635/16" (1608)

A

Location 31/8" (79)

W

H

AA

A

A

FRAMED PANEL SPECIFICATIONS

Framed Panel Requirements

MODEL WS-30

Max Panel Weight 75 lbs (34 kg)

Min Panel Thickness 1/4" (6)

Model WS-30

OVERLAY PANEL

Overlay model WS-30 can be used in an overlay or flushinset application. The specific application will affect panelsizes, opening dimensions and the installation.

Overlay model WS-30 will be shipped without handlehardware and with an overlay panel grille as standardequipment. Along with the door panel, you will need toprovide a panel for the grille and hardware to complementyour surrounding cabinetry.

The overlay design allows the decorative panel to coverthe door trim for a more seamless appearance. The mostcommon way to achieve this look is to work with threepanels—the decorative overlay panel, which is typically3/4" (19), a .10" (3) spacer panel and a 1/4" (6) backerpanel. Depending on your cabinet manufacturer, this couldbe one panel routed for different dimensions. The illustra-tions below will give you a better idea of the panel con-struction and how it interacts with our frame. The size ofthe overlay panel is critical, it must fit over the door frame.

IMPORTANT NOTE: Do not cover the glass door with asolid panel. The window cut-out edges of the overlay,spacer and backer panels will need to be finished, as theywill be exposed.

OVERLAY PANEL SPECIFICATIONS

Wine Storage 75

subzero.com/specs

Do not exceed overlay panel dimensions, as this couldcause damage to panels and the Sub-Zero unit.

1/8"(3)

OVERLAY PANEL

SPACER PANEL

BACKER PANEL

TRIM

5/16" (8) min

DOOR FRAME GLASS

Panel assembly cross section. Panel assembly rear view.

1/4" (6).10" (3)

OVERLAYPANEL

SPACERPANEL

BACKERPANEL

3/4"(19)

typical

Grille panel dimensions listed are for a standard 84" (2134)overall height of the unit. For an 83" (2108) overall height,subtract 1" (25) from grille panel height dimensions. For an88" (2235) overall height, add 4" (102) to height dimensions.Width dimensions do not vary.

WS-30 Overlay

DOOR W H

Overlay Panel 30" (762) 693/4" (1772)

Spacer Panel 291/8" (740) 6815/16" (1751)

Backer Panel 293/4" (756) 699/16" (1767)

GRILLE W H

Overlay Panel 30" (762) 91/4" (235)

Spacer Panel 291/8" (740) 85/16" (211)

Backer Panel 293/4" (756) 815/16" (227)

WINDOW W H

Cut-Out 231/2" (597) 631/4" (1607)

A

Location 31/4" (83)

H

W

H

AA

A

A

Overlay Panel Requirements

MODEL WS-30



Model WS-30

FLUSH INSET PANEL

Overlay model WS-30 used in a flush inset applicationallows the decorative panel to cover the door trim for aseamless appearance. The most common way to achievethis look is to work with three panels—the decorative flushinset panel, which is typically 3/4" (19), a .10" (3) spacerpanel and a 1/4" (6) backer panel. Depending on yourcabinet manufacturer, this could be one panel routed fordifferent dimensions. The illustrations below will give you abetter idea of the panel construction and how it interactswith our frame. The size of the flush inset panel is critical,it must fit over the door frame.

IMPORTANT NOTE: Do not cover the glass door with asolid panel. The inside edges of the rough opening as wellas the sides and a portion of the back side of the decora-tive panels will need to be finished, as they will beexposed when the doors are open. The window cut-outedges of the overlay, spacer and backer panels will alsoneed to be finished.

IMPORTANT NOTE: For flush inset panels thicker than3/4" (19), a 90˚ door stop may be required to prevent inter-ference with adjacent cabinets.

Sub-Zero Design Guide 76

9/16"(14)

FLUSH INSET PANEL

SPACER PANEL

BACKER PANEL

TRIM

5/16" (8) min

Panel assembly crosssection.

Panel assembly rear view.

1/4" (6).10" (3)

FLUSH INSETPANEL

SPACERPANEL

BACKERPANEL

3/4"(19)

typical


WS-30 Flush Inset

DOOR W H


Spacer Panel 291/8" (740) 6815/16" (1751)

Backer Panel 293/4" (756) 699/16" (1767)

GRILLE W H


Spacer Panel 291/8" (740) 85/16" (211)

Backer Panel 293/4" (756) 815/16" (227)

WINDOW W H

Cut-Out 231/2" (597) 621/4" (1581)

A

Location 33/4" (95)

H

W

H

AA

A

A


FLUSH INSET PANEL SPECIFICATIONS

Flush Inset Panel Requirements

MODEL WS-30




subzero.com/specs

5/8"(16)

5/16" (8) 1/2"(13)

FLUSH INSET PANEL

SPACER

BACKER


TOP VIEW

CABINETRY

Illus. A Illus. B

1/2" (13)

5/16"(8)

1/8"(3)

CABINETRY

GRILLE

SIDE VIEW

1/2" (13)

3/32"(2)

5/16"(8)

5/16"(8)

5/32"(4)

GRILLE

DOOR

SIDE VIEW

Illus. C Illus. D

5/16"(8)

3/32"(2)

DOOR /DRAWER

SIDE VIEW


MODEL WS-30

Door / Grille Sides AGrille Top BGrille Bottom / Door Top CDoor Bottom D

Model WS-30

FLUSH INSET PANEL

Illustrations A–D provide panel offsets and reveals formodel WS-30 in a flush inset application. Refer to thechart below for reference to the illustrations.

For additional information on panel reveals, visit the speci-fication library section of our website, subzerotrade.com.

DUAL INSTALLATIONS

When two models WS-30 or a model WS-30 and built-inunit are installed side by side, a dual installation kit may berequired. Contact your Sub-Zero dealer for the propercomponents and installation instructions. For questionsrelative to the installation, call Sub-Zero at 800-222-7820.To obtain local dealer information, visit the showroomlocator section of our website, subzero.com.

DUAL STANDARD INSTALLATIONS

Two framed, overlay or stainless steel units may be placedside by side in a dual installation. Some dual standardinstallations will require a dual installation kit, availablethrough your Sub-Zero dealer.

A custom filler strip can be used in between two units in aframed, overlay or stainless steel design application. It isrecommended that the filler strip be at least 2" (51) wide,to prevent condensation between the units. Be sure to addthe filler strip width to your rough opening width.

Dual installations without a filler strip can only be accom-plished using two units with opposite hinges as shown inillustration A below. The dual installations shown in illus-trations B and C require a filler strip.

IMPORTANT NOTE: For the application shown in illustra-tion A, a dual installation accessory kit is required.

Illus. A


Illus. B Illus. C


Model WS-30

DUAL FLUSH INSET INSTALLATIONS

Installing two models WS-30 or a model WS-30 andbuilt-in unit side by side in a flush inset application willrequire adjustments to the dimensions of your finishedrough opening, panel sizes and panel offsets. It will alsorequire a dual installation kit, available through yourSub-Zero dealer.

Dual installations without a filler strip can only be accom-plished using two units with opposite hinges as shown inillustration A below. The dual installations shown in illustra-tions B and C require a filler strip. Illustration A is the onlyapplication that will accommodate the dual wide grille.

IMPORTANT NOTE: The application shown in illustration Acan only be achieved by installing dual flush inset panels.Failure to install dual flush inset panels will cause thehandle side of the panels to collide when closing. In thisapplication a dual installation accessory kit is alsorequired.

Dual flush inset panels and dual installation kits are avail-able through your Sub-Zero dealer. Refer to the illustrationand chart for dual flush inset panel specifications.


WS-30 Dual Flush Inset

DOOR W H


Spacer Panel 291/8" (740) 6815/16" (1751)

Backer Panel 293/4" (756) 699/16" (1767)

GRILLE W H


Spacer Panel 291/8" (740) 85/16" (211)

Backer Panel 293/4" (756) 815/16" (227)

WINDOW W H

Cut-Out 23" (584) 621/4" (1581)

A

Location 33/4" (95)

H

W

H

AA

A

A

Illus. A


Illus. B Illus. C

DUAL FLUSH INSET PANEL SPECIFICATIONS


subzero.com/specs

Model WS-30

DUAL FLUSH INSET PANELS

When installing two models WS-30 or a model WS-30and built-in unit side by side in a flush inset application,you must decrease the width of the decorative flush insetpanels by 1/2". Adjustments to the panel offsets will alsoneed to be made. These adjustments are needed toachieve a proper fit and to ensure the panels do notcollide when closing. Panel dimensions in the chart belowhave been adjusted to reflect the decrease in paneldimensions.

IMPORTANT NOTE: If a filler strip is not used, dual installa-tions can only be accomplished using two units withopposite hinges.

Illustrations A–E provide panel offsets and reveals formodel WS-30 in a flush inset application. Refer to thechart below for reference to the illustrations. All reveals are1/2" (13) unless otherwise specified.

For additional information on panel reveals, visit the speci-fication library section of our website, subzerotrade.com.

5/8"(16)

5/16" (8) 1/2"(13)

FLUSH INSET PANEL

SPACER

BACKER


TOP VIEW

CABINETRY

Illus. A Illus. B

DUALTRIM

1/4" (6)REVEAL

5/16" (8)1/8" (3)

DOOR DOOR

TOP VIEW

Do not exceed the flush inset decorative paneldimensions. Exceeding dimensions could causedamage to the panels and the Sub-Zero unit.

1/2" (13)

5/16"(8)

1/8"(3)

CABINETRY

GRILLE

SIDE VIEW

Illus. C Illus. D

1/2" (13)

3/32"(2)

5/16"(8)

5/16"(8)

5/32"(4)

GRILLE

DOOR

SIDE VIEW

5/16"(8)

3/32"(2)

DOOR /DRAWER

SIDE VIEW

Illus. E


MODEL WS-30

Doors (hinge) / Grille Sides ADoors (handle) Sides BGrille Top CGrille Bottom / Door Top DDoor Bottom E

Wine Storage 80

Handle Hardware

For overlay and integrated models, handle hardware mustbe provided. Optional stainless steel tubular and prohandles are available through your authorized Sub-Zerodealer.

The door frame has numerous mounting holes on eachside to accommodate handle hardware. Using the pre-drilled holes to attach the handle will provide the bestalignment and strength.

IMPORTANT NOTE: Refer to the full-scale template at theend of this section for a profile of the door frame andposition of the glass. Do not drill through the glass.

Side Panels

MODEL WS-30

When planning for side panels with the installation of themodel WS-30, you need to be aware of the space configu-ration to achieve a pleasing fit. Depending on the exactpanel you are using, the height of the panel may vary.

IMPORTANT NOTE: The use of side panels may changethe width of your rough opening.

When installing a model WS-30 with a custom side panel,an accessory kit (7003407) is required. Stainless steelside panels are also available through your authorizedSub-Zero dealer.

The side panel will need to be a minimum of 24" (610)deep and 1/2" (13) thick. Refer to the illustrations below forside panel dimensions. Routing will be necessary so thatthe side panel fits flush against the side of the unit.

Routing detail.

MAINFRAME

SIDE PANELROUTING

1" (25)

17/8" (48)

1/8" (3)

1/2" (13)

84"(2134)

24" (610)

OPTIONALTOE KICKCUT-OUT

4" (102)

17/8"(48)

1" (25)

ROUT TO 1/8" (3)

FRONTOF SIDEPANEL

25/8"(67)

Side panel dimensions.

Accessories


• Front panels in stainless steel with handle options.

• Grilles for an 83" (2108) or 88" (2235) finished heightfor model WS-30.

• Side panels in stainless steel and white enamel formodel WS-30.


• Door lock kits.

• Dual installation kits.

• Harness kit for Star-K compliance.


Refer to the chart below for standard lengths of tubularand pro handles used on wine storage models.

Wine Storage 81

subzero.com/specs


315W, 424G AND 424FS DOOR

Tubular Handle 23" (584)

Pro Handle 21" (533)


427G AND 427RG DOOR DRAWER

Tubular Handle 417/16" (1053) 23" (584)

Pro Handle 391/2" (1003) 21" (533)

Stud Spacing 383/8" (975) 193/4" (502)

WS-30 DOOR


Pro Handle 451/8" (1146)


A

21/4" (57) Rail /Stile

Glass

A

CL

Cabinet DoorProfile

Door Frame Profile

FULL-SCALE TEMPLATE

The full-scale template below shows an example of thedoor frame profile for wine storage models and the rela-tionship to the overlay panel (rails and stiles).

DOOR FRAME PROFILEMODEL 424G SHOWN

Dimension A

424G and 315W 1" (25)

427G and 427RG 7/8" (22)

WS-30 15/16" (24)

Wine Storage 82

Wine Shelf Wood Facing

FULL-SCALE TEMPLATE

For each model, the wine storage shelves have a naturalcherrywood facing. You can replace these strips withwood more complementary to your design and surround-ing cabinetry. Refer to the full-scale template below.

To remove the cherry strips, take the shelves out andremove the screws. Reverse the procedure to affix thenew wood facing.

IMPORTANT NOTE: If you choose to stain or seal thewood facing, be aware that some of these substances arehazardous and will damage stored wine.

Dimension A

315W 1015/16" (278)

424G and 424FS 191/2" (495)

427G and 427RG 2015/15" (532)

WS-30 249/16" (624)

Dimensions will vary for model 315W. Refer to specificationson our website, subzero.com.

A (WIDTH)

Maximum Thickness

FRONT VIEW SIDE VIEW

11/2" (38)

5/8"(16)

7/64"(3)

5/64"(2)

23/64"(9)

9/16" (14)

27/32"(21)

WINE SHELF WOOD FACINGWINE STORAGE MODELS

DOOR CLOSED

MODEL 424

3/4" (19) DOOR PANEL

1/2"(13)

1/8" (3)

MAXIMUM DOOROPENING 145°

1/4" (6)

Wine Storage 83

subzero.com/specs

Door Clearance

FULL-SCALE TEMPLATE

Model 424G should extend a minimumof 1/4" (6) beyond the front surface ofadjoining cabinetry to allow for themaximum 145° door opening. The unitcan be installed flush with adjacentcabinetry, however, there is potentialfor interference with the panel if thedoor is opened past 90°.


1" (25)0"

SCALE

MODELS 424G (WINE) AND UC-24BG

Undercounter Refrigeration 85

subzero.com/specs

Undercounter Refrigeration. Sub-Zero undercounter refrigeration is a helpful addition to a master suite, bar, homeoffice or media room. In the kitchen, a high-volume ice maker is a must for entertaining. The design flexibility of thesecompact yet roomy units makes them all the more welcome in any room or outdoor kitchen. They’re ready to be fitted witha custom cabinet panel or can be ordered with a stainless steel panel.

34"(864)

237/8"(606)

335/8"(854)

143/4"(375)

335/8"(854)

143/4"(375)

UC-24RO UC-15I(P) UC-15I(P)O

34"(864)

237/8"(606)

34"(864)

237/8"(606)

34"(864)

237/8"(606)

UC-24R UC-24BG UC-24C(I)

KEY FEATURES

• Overlay and stainless steel design applications.

• Handle options coordinate with handles of Wolfcooking products.

• Models UC-24RO and UC-15I(P)O are rated foroutdoor use.

UNDERCOUNTER MODELS


qualified.

• All models are Star-K certified.


237/8" (606) 24" (610)

34"(864)

4" (102)

253/8"(645)

23/8" (60)

MODELS UC-24R, UC-24BG, UC-24C(I) AND UC-24RO

Specifications

143/4" (375) 23" (584)

335/8"(854)

4" (102)

18"(457)

23/8" (60)

MODELS UC-15I(P) and UC-15I(P)O

Overall Dimensions

UNDERCOUNTER MODELS

Capacity / Weight

INTERIOR CAPACITY R CU FT (L) F CU FT (L)

UC-24R, UC-24BG and UC-24RO 5.7 (161)

UC-24C(I) 3.6 (102) 1.1 (31)

ICE STORAGE CAPACITY LBS (KG)

UC-15I(P) and UC-15I(P)O 26 (12)

SHIPPING WEIGHT LBS (KG)

UC-24R, UC-24BG, UC-24C(I) and UC-24RO 130 (59)

UC-15I(P) and UC-15I(P)O 100 (45)


subzero.com/specs

Opening Width A

UC-24R, UC-24BG, UC-24C(I) and UC-24RO 24" (610)

UC-15I(P) and UC-15I(P)O 151/4" (387)

24" (610)OPENING

DEPTH

AOPENING WIDTH


341/2" (876)OPENINGHEIGHT

TOP VIEW

FRONT VIEWSIDE VIEW

Opening Dimensions

UNDERCOUNTER MODELS



For ice maker models, the electrical supply can be locatedanywhere on the back wall. For all other undercountermodels, locate the electrical supply within the shaded areashown in the illustration below. Follow the NationalElectrical Code and local codes and ordinances wheninstalling the receptacle. A separate circuit, servicing onlythis appliance, is required.

IMPORTANT NOTE: Models UC-24RO and UC-15I(P)O aredesigned and safe for use in outdoor applications. Wheninstalled outdoors, a ground fault circuit interrupter (GFCI)is required to reduce the risk of electrical shock. A GFCI isnot recommended for use with other undercounter modelsand may cause interruption of operation.





FRONT VIEW

151/2"(394)

3" (76)

2" (51)





For model UC-24C(I) and the ice maker models, the watersupply line should be located within the shaded areashown in the illustrations below. The water supply lineshould be connected to the house supply with an easilyaccessible shut-off valve between the supply and the unit.Do not use self-piercing valves. A saddle valve kit(4200880) is available through your authorized Sub-Zerodealer.

The ice maker operates on constant water pressurebetween 20 psi (1.4 bar) and 100 psi (6.9 bar).

IMPORTANT NOTE: In some cases, a reverse osmosiswater filter system may not be able to maintain theminimum pressure consistently.




Excess Water Line for Connection 26" (660) min

FRONT VIEW

SHADED AREAEXTENDS 1/2" (13)FROM BACK WALL

151/2"(394)

3" (76)

2" (51)

Model UC-24C(I). Ice maker models.

LOCATION OFWATER LINE

8"(203)

1/2"(13)

TOP VIEW

Overlay Panel

MODELS UC-24R, UC-24C(I) AND UC-15I(P)

The overlay design allows for a decorative panel to coverthe door trim for a seamless appearance that will comple-ment surrounding cabinetry. You may also choose tomatch the handle hardware of surrounding cabinetry.Refer to the charts for panel specifications.

MODEL UC-24BG

For model UC-24BG, the overlay door panel will consist ofonly a frame and will affix directly to the door with screwsthrough a series of predrilled holes.

The glass area of the door is designed to be exposed toair circulation. Decorative overlays on the glass should bekept to a minimum. Do not install a solid panel on theglass door unit: this may cause moisture to form behindthe panel. Refer to the charts for panel specifications.

IMPORTANT NOTE: The width of rails and stiles can beincreased but should not exceed cabinet manufacturers’standard widths or the overall panel dimensions. The backsides of rails and stiles that will be visible through theglass door will need to be finished along with the insideedges of the frame.

Panel Requirements

MAX PANEL WEIGHT

UC-24R and UC-24C(I) 20 lbs (9 kg)

UC-24BG 10 lbs (5 kg)

UC-15I(P) 15 lbs (7 kg)

MIN PANEL THICKNESS

Overlay Panels 5/8" (16)

Panel Dimensions

UC-24R AND UC-24C(I) W H

Overlay Panel 233/4" (603) 301/16" (764)

UC-24BG W H

Overlay Panel 233/4" (603) 301/16" (764)

Rails and Stiles (min) 21/4" (57)

UC-15I(P) W H

Overlay Panel 15" (381) 303/8" (772)


subzero.com/specs

Drain Pump

ICE MAKER MODELS

Undercounter ice maker models can be ordered with orwithout a pump. Models without a drain pump will drainwater from the unit by gravity. A drain must be installed.Refer to the illustrations below.

A gravity drain model may be converted to a pump modelthrough the installation of a drain pump kit availablethrough your authorized Sub-Zero dealer. Installationinstructions are included with the drain pump kit.

The drain and inlet water tubes must be plumbed beforeconnecting to the ice maker. For the gravity drain, all hori-zontal runs of drain lines must have a 1/4" (6) per 12" (305)fall. An air gap will likely be required between the icemaker and the drain receptacle. A stand pipe with a trapbelow it would be acceptable for the drain receptacle.

IMPORTANT NOTE: Poor drainage will cause excessive icemelting in the bin.

151/4"min(387)

OPENING WIDTH

TOP VIEW

TOP VIEW

FRONT VIEW

1/8" (3)

DRAINTUBE

WATERINLET TUBE SHUT-OFF

VALVE

DRAINTUBE

WATERINLETTUBE

SHUT-OFFVALVE

DRAIN

151/4"min(387)

OPENING WIDTH

TOP VIEW

TOP VIEW

FRONT VIEW

1/8" (3)

DRAIN TUBE

SHUT-OFFVALVE

AIR GAPDEVICE

DRAIN TUBE

AIR GAPDEVICE

WATERINLET TUBE

SHUT-OFFVALVE

WATERINLET TUBE

DRAIN PUMPMODELS UC-15IP AND UC-15IPO

GRAVITY DRAINMODELS UC-15I AND UC-15IO



UNDERCOUNTER MODELS DOOR

Tubular Handle 23" (584)

Pro Handle 21" (533)


Door Clearance

MODELS UC-24R, UC-24BG AND UC-24C(I)

Undercounter models can be installed flush with surround-ing cabinetry. Depending on the thickness of the overlaydoor panel, it may be necessary to install the unit so that itextends 1/4" (6) beyond the front surface of surroundingcabinetry. This will prevent interference between the doorpanel and adjoining cabinetry at the maximum 145° doorswing. Refer to the full-scale template on page 83 of thewine storage section.

Accessories


• Stainless steel front panels with handles.


• Door lock.

• Drain pump kit.


Refer to the chart below for standard lengths of tubularand pro handles used on undercounter models.

Glass

CL

1" (25) 1" (25)

21/4" (57) Rail /Stile

Door Panel Profile

Door Frame Profile

FULL-SCALE TEMPLATE

The full-scale template shows the door frame profile formodel UC-24BG and the relationship to the overlay panel(rails and stiles).

DOOR FRAME PROFILEMODEL UC-24BG


subzero.com/specs

191/2" (495)

Maximum Thickness

FRONT VIEW SIDE VIEW

11/2" (38)

5/8"(16)

7/64"(3)

5/64"(2)

23/64"(9)

9/16" (14)

27/32"(21)

WINE SHELF WOOD FACINGMODELS UC-24BG AND UC-24C(I)

The information and images in this guide are the copyright property of Sub-Zero, Inc. Neither this guide nor any information or images containedherein may be copied or used in whole or in part without the express written permission of Sub-Zero, Inc. ©Sub-Zero, Inc. all rights reserved.

Wine Shelf Wood Facing

FULL-SCALE TEMPLATE

For models UC-24BG and UC-24C(I), follow dimensions inthe full-scale template below if you choose to replace thenatural cherrywood facing of the wine shelves with woodmore complementary to your design and surroundingcabinetry.

Sub-Zero Products Limited WarrantyRESIDENTIAL USE ONLY

FULL FIVE YEAR SEALED SYSTEM WARRANTYLIMITED SIXTH THROUGH TWELFTH YEAR WARRANTY ON THE SEALED SYSTEM

FULL TWO YEAR WARRANTY ON TOTAL PRODUCT*

FULL FIVE YEAR SEALED SYSTEM WARRANTY

For five years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repairor replace any components that prove to be defective in materials or workmanship in the sealed system. Thesealed system consists of the compressor, condenser, evaporator, drier and all connecting tubing.

FULL TWO YEAR WARRANTY*

For two years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repairor replace any part of the product, that proves to be defective in materials or workmanship.

LIMITED SIXTH THROUGH TWELFTH YEAR SEALED SYSTEM WARRANTY

From the 6th through the 12th year from the date of original installation, your Sub-Zero warranty covers allparts that prove to be defective in materials or workmanship in the sealed system (parts only). The sealedsystem consists of the compressor, condenser, evaporator, drier and all connecting tubing.

TERMS APPLICABLE TO EACH WARRANTY

All service provided by Sub-Zero under the above warranty must be performed by a Sub-Zero authorized servicecenter, unless otherwise specified by Sub-Zero. Service will be provided in the home during the normalbusiness hours. This warranty applies only to products installed for normal residential use. Details regarding anon-residential warranty are available upon request.

The warranty applies only to products installed in any one of the fifty states of the United States, the Districtof Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct anydefect caused by negligence, accident or improper use, maintenance, installation, service or repair, includingbut not limited to improper removal and reinstallation (whether in the unit or at a remote location) of the con-densing unit.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO WILLPROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OFLAW. SUB-ZERO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGESARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS,IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above lim-itation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also haveother legal rights, which vary from state to state.

To receive parts and/or service and the name of the Sub-Zero authorized service center nearest you, contactSub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website,subzero.com or call 800-222-7820.

*Stainless steel doors, panels, product frames and interior surfaces are covered by a limited 60-day parts andlabor warranty for cosmetic defects.

*Replacement water filters and air purification cartridges are not covered by the product warranty.

Sub-Zero Outdoor Products Limited WarrantyRESIDENTIAL USE ONLY


FULL ONE YEAR WARRANTY ON TOTAL PRODUCT*


For five years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repairor replace any components that prove to be defective in materials or workmanship in the sealed system. Thesealed system consists of the compressor, condenser, evaporator, drier and all connecting tubing.

FULL ONE YEAR WARRANTY*

For one year from the date of original installation, your Sub-Zero warranty covers all parts and labor to repairor replace any part of the product which proves to be defective in materials or workmanship.

TERMS APPLICABLE TO EACH WARRANTY

All service provided by Sub-Zero under the above warranty must be performed by a Sub-Zero authorized servicecenter, unless otherwise specified by Sub-Zero. Service will be provided in the home during the normalbusiness hours. This warranty applies only to products installed for normal residential use. Details regarding anon-residential warranty are available upon request.

The warranty applies only to products installed in any one of the fifty states of the United States, the Districtof Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct anydefect caused by negligence, accident or improper use, maintenance, installation, service or repair, includingbut not limited to improper removal and reinstallation (whether in the unit or at a remote location) of the con-densing unit.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO WILLPROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OFLAW. SUB-ZERO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGESARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS,IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above lim-itation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also haveother legal rights, which vary from state to state.

To receive parts and/or service and the name of the Sub-Zero authorized service center nearest you, contactSub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website,subzero.com or call 800-222-7820.

*Stainless steel doors, panels, product frames and interior surfaces are covered by a limited 60-day parts andlabor warranty for cosmetic defects.

*Replacement water filters are not covered by the product warranty.

SUB-ZERO, INC. P. O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820

SZDG 1/2010

subzero design guide

Documents