suction modes and force mode pumps
TRANSCRIPT
WELCOME TO OURWELCOME TO OUR PRESENTATIONPRESENTATION
A PRESENTATION ON A PRESENTATION ON SUCTION MODE PUMP SUCTION MODE PUMP
ANDAND FORCE MODE PUMPFORCE MODE PUMP
Suction mode Suction mode pump:pump:A pump for drawing up a liquid A pump for drawing up a liquid
by means of suction produced by by means of suction produced by a piston drawn through a a piston drawn through a
cylinder.cylinder.Force mode Force mode pump:pump:A pump with a solid piston and A pump with a solid piston and
valves used to raise a liquid or valves used to raise a liquid or expel it under pressure.expel it under pressure.
Centrifugal pump:Centrifugal pump:A centrifugal pump may be defined as one in which an impeller rotating inside a close fitting case draws in the liquid at the center and by virtue of centrifugal force throws out the liquid through an opening.
Centrifugal pumpCentrifugal pump
Characteristics of Characteristics of centrifugal pumpcentrifugal pump
1.1. Simple in constructionSimple in construction Low initial costLow initial cost
Produce a constant steady dischargeProduce a constant steady discharge
Easy to operateEasy to operate
2.Wearing parts are few2.Wearing parts are few
3.Adapted to direct motor or3.Adapted to direct motor or engineengine
Different parts of Different parts of centrifugal pump on centrifugal pump on the basis of suction the basis of suction
mode:mode:1.Casing1.Casing2.Impeller2.Impeller
3.Shaft sealing3.Shaft sealing4.Shaft and bearing4.Shaft and bearing5.Oil seal5.Oil seal
6.Bearing housing6.Bearing housing7.Bearing frame7.Bearing frame8.Magnetic drain plug8.Magnetic drain plug
9.Oil sight glass9.Oil sight glass
Centrifugal pump:Centrifugal pump:
Impeller and bearing:Impeller and bearing:
Jacket seal chamber and Jacket seal chamber and bearing isolator:bearing isolator:
1.Eliminate use of seal water. 1.Eliminate use of seal water.
2.Reduce utility cost.2.Reduce utility cost.
3.Eliminate pumpage contamination.3.Eliminate pumpage contamination.
1.Use for maximum protection.1.Use for maximum protection.
Function of diferent parts of Function of diferent parts of sunction mode pumpsunction mode pump
Seal:It helps to prevent the leakage of the pumped liquid into Seal:It helps to prevent the leakage of the pumped liquid into the atmosphere.the atmosphere.
Shaft:It transmit the input power from the driver into the Shaft:It transmit the input power from the driver into the impiller.impiller.
Impiller:It increase the pressure of the liquid.Impiller:It increase the pressure of the liquid.Bearing:It support the weight of the shaft assembly to carry Bearing:It support the weight of the shaft assembly to carry
the hydraulic load.the hydraulic load.Casing:It contains the liquid and act as a pressure Casing:It contains the liquid and act as a pressure containment vessel that directs the flow of liquid in and out containment vessel that directs the flow of liquid in and out
the centrifugal pump.the centrifugal pump.Coupling:Couplings are to connect the pump shaft and the Coupling:Couplings are to connect the pump shaft and the driver shaft.driver shaft.
Submersible pump onSubmersible pump on the basis of force mode:the basis of force mode:A submersible pump is a A submersible pump is a pump that is able to be pump that is able to be placed under water and placed under water and
still carry out its intended still carry out its intended purpose.purpose.Application:It’s use for Application:It’s use for
drainage,sewage pumping,general drainage,sewage pumping,general industrial pumping and slurry industrial pumping and slurry
pumpingpumping
Parts of submersible Parts of submersible pump:pump:
1.Discharge pipe1.Discharge pipe2.Discharge bowl2.Discharge bowl
3.Discharge bearing
4.Intermediate bowl
5.Impellers
6.Upthrust collar7.Intermediate bowl bearing
8.Pump shaft9.Suction inlet
10.Suction adapter11.Pump coupling
Submersible pump:Submersible pump:
Submersible pump:Submersible pump:
Application of submersible Application of submersible pump in field:pump in field:
THANKS TO ALLTHANKS TO ALL
PresentedPresented ByBy
1.Mukta parvinID:1107050
2.Dipika royID:1107066
3.Thamina nasrinID:1107061