supplie˜ - online quilting fabric store
TRANSCRIPT
1/3 yard or two 10” squares of fabricHeat ‘n Bond UltraholdByAnnie ZipperWonder ClipsRotary Cutter
Cut a 10” square of the outer fabric, inner fabric &Heat ‘n Bond. Fuse the Heat ’n Bond to the wrongside of both fabrics.
Supplies
STEP 1: PREP YOUR FABRIC
PAGE 1 OF 2 WWW.FATQUARTERSHOP.COM
SEWING TUTORIALZipper PouchSEAMS QUICK & IS SEW EASY
FINISHED POUCH MEASURES APPROXIMATELY 5" X 9"
Trim your zipper to about 12” and remove the zipperpull to seperate the tracks.
STEP 2: PREP YOUR ZIPPER
Place each zipper pieces right sides together withyour outer fabric. Pay close attention to the directionof the zipper teeth (inward) and clip in place.
Stitch using a 1/4” seam.
STEP 3: ATTACH THE ZIPPER
Trim excess zippers on both sides of your fabrics.
STEP 4: TRIM THE ZIPPER
Copyright 2020 Fat Quarter Shop, LLC. All rights reserved. Duplication of any kind is prohibited.
This pattern may be used for personal purposes only and may not be reproduced without the express writtenpermission from the Fat Quarter Shop. This pattern may not be used for commercial purposes.
PAGE 2 OF 2 WWW.FATQUARTERSHOP.COM
SEWING TUTORIALZipper PouchSEAMS QUICK & IS SEW EASY
Gently fold your pouch towards the center, wrong sides out and clip in place.
Feed zipper pull upside down to reattach to thetracks. Feed one zipper track at a time until thepull catches.
STEP 5: FINISH THE ZIPPER
Glide your zipper pull up the tracks to the middleof the pouch. Seal both openings by stitching a1/4” seam backstitching at the start and stop.
Cut a 2.5” x 8” rectangleWith wrong sides up, fold each end inside 1/2” & press
Fold length wise to find your center & press
Finger press open and press each edge insidetowards the center crease & press
Topstitch down the length to secure in place
Feed pull onto your zipper and stitchacross one end and backstitch
STEP 6: SEAL YOUR POUCH
Flip your pouch inside out through the opening.Using a point turner to get the corners out.
STEP 7: FLIP IT OUT
Zipper Pull TUTORIAL