Sure-LitesThe LED APX series is UL924 code compliant solution for indoor exit requirements. It is available as AC only (APX6) or self-powered (APX7) with a maintenance free nickel cadmium battery. The self-powered version will operate for a minimum of 90 minutes during a power outage. All models feature an LED source available in red or green, are field configurable for single or double face and are universal mount (ceiling, wall or end). The polycarbonate housing is available in white or black.

SPECIFICATION FEATURES

Electrical- Dual voltage input 120/277VAC, 60Hz

- Solid-State voltage limitedcharger (APX7)

- Brownout circuit (APX7)- Test switch / Power indicatorlight (APX7)

Housing Construction- All components are injectionmolded, color stable, highimpact thermoplastic material

- Available in a white or black finish- Components are of snap-fitconstruction to facilitateunder 5-minute installation

- Reinforcing ribs throughoutto provide maximum strengthconnections

- All components including batteryand electronics are located insidethe exit housing

- Snap-out or snap-in chevrondirectional indicators havefull 3/4” stroke

- Universal exits can be fieldconfigured as single face ordouble face

- Snap-fit canopy with mountingscrews included with all exits

- Exit can be ceiling, wall, orend mounted

- Universal J-box mountingpattern

- Operating temperature range10 °C to 40 °C

Battery- Sealed nickel cadmium- Maintenance free, long life- Full recharge time:24 hrs (max.)

Code Compliance- UL 924 Listed- UL Damp Location Listed- Life Safety NFPA 101- NEC/OSHA- Most State and Local Codes- operatig temperature range 10 °C

to 40 °C- California Energy Code

compliant

Lamp Data- AC LED: Long life LED lamps

provide uniform diffusedillumination

- DC: LED DC lamps (Brighter inemergency mode, APX7)

Warranty- Five-year warranty- Seven-year prorated battery warranty

APX SERIES

TD505040EN2017-10-3

DESCRIPTION

E N E R G Y D A T AMaximum power

consumption

under all charge

conditions:

Sealed NickelCadmium BatteryLED Exits - Red

Input Power:

120V = .99W

277V = 1.14W

Input Current

(Max.):

120V = .07A

277V - .07A

Power Factor:

120V = >.12

277V = >.06

LED Exits - Green

Input Power:

120V = .93W

277V = 1.05W

Input Current

(Max.):

120V = .07A

277V = .07A

Power Factor:

120V = >.11

277V = >.05

Energy DataAC Only LED

Exits - Red

Input Power:

120V = 1.31W

277V = 1.74W

Input Current

(Max.):

120V = .07A

277V - .08A

Power Factor:

120V = >.17

277V = >.08

LED Exits - Green

Input Power:

120V = 1.33W

277V = 1.76W

Input Current

(Max.):

120V = .07A

277V = .07A

Power Factor:

120V = >.05

277V = >.03

1-5/8"[41mm]

11-5/8"[295mm]

7-3/16"[183mm]

THERMOPLASTIC EXIT

AC ONLY SELF POWERED

EMERGENCY

LED LAMPS

EXIT LIGHTING

Catalog # Type

Date

Project

Comments

Prepared by

ORDERING INFORMATION

SAMPLE NUMBER: APX7RBK

Series Battery Face Options Letter Colors Housing Color Remote Heads Powered

APX 6 = no battery (AC only)7 = nickel cadmium battery

_ = Universal R = RedG = Green

_ = WhiteBK = Black

APX6R,APX6G,APX6RBK,APX6GBK APX7R,APX7G,APX7RBK,APX7GBK

operatingtemperaturerange

-20˚to 50˚Coperatingtemperaturerange

10˚to 40˚C

Specifications and dimensions subject to change without notice.

TECHNICAL DATA

LampsSelf-Powered LED versions of the All ProEmergency Series Exits use energy efficient,long life LEDs to provide uniform diffuseillumination of the exit face. Both the redand green LEDs require no maintenance andconsume a total of 2.0 watts. The low operatingcosts and zero maintenance requirement makesLED lamps the wisest choice for exit signstoday. Emergency illumination is provided byLED lamps,

Housing ConstructionRugged, durable, injection moldedthermoplastic materials are used throughout theAll Pro Emergency Series Exits. All structuralcomponents are designed with reinforcingribs to add additional rigidity and to maximizestructural integrity. These materials are impactand scratch resistant, and they have been UVstabilized to resist discoloration due to ageand ultraviolet radiation. All components aredesigned to be of snap-fit construction - nomechanical fasteners - to facilitate installationin under 5-minutes. Any components requiredfor installation (wirenuts, wire leads, universalmetal J-box bracket, etc.) are all includedwith each exit. The universal design of the AllPro Series Exits enables universal exits to beconfigured as single face or double face in thefield. All Self-Powered All Pro Series Exits canbe wall, ceiling, or end mounted; a rugged,snap-fit, low profile canopy with captive screwsis included with every exit for ceiling and endmounting applications. The housings are available with a white or black finish.

LensLenses are made from durable impact resistantthermoplastic. All exit faces are designed withfull 3/4” stroke snap-out or snap-in chevrondirectional indicators to insure maximumvisibility and compliance with the latest codes.

Solid-State Charger (APX7)Supplied with a 120/277 VAC, voltage regulatedsolid-state charger. Immediately uponrestoration of AC current after a power failure,the charger provides a high charge rate. Thecharge circuit reacts to the condition of thebattery and regulates the charging process inorder to maintain peak battery capacity andmaximize battery life. Solid-state constructionrecharges the battery following a power failurein accordance with UL 924.

Brownout Circuit (APX7)The brownout circuit on All Pro exits monitorsthe flow of AC current to the exit and activatesthe emergency lighting system when apredetermined reduction of AC power occurs.This dip in voltage will cause most ballastedfixtures to extinguish causing loss of normallighting even though a total power failure hasnot occurred.

Test Switch/Power Indicator Light (APX7)A test switch located on the bottom of the exitpermits the activation of the emergency circuitfor a complete operational systems check. ThePower Indicator Light provides visual assurancethat the AC power is on.

Sealed Nickel Cadmium BatteryAll Pro Emergency sealed nickel cadmiumbatteries are maintenance free with a lifeexpectancy of 10 years. The sealed rechargeablenickel cadmium battery offers high dischargerates and stable performance over a widerange of temperatures. The specially designedresealable vent automatically controls cellpressure, assuring safety and reliability.This battery is best suited for harsh ambienttemperatures because the electrolyte is notactive in the electrochemical process.

WarrantyThe All Pro Series exit signs are backed by afive-year warranty.

APX SERIES EXITS WITH REMOTE CAPACITY

Cooper Lighting Solutions 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com

TD505040EN-1: TD505040EN-2: TD505040EN-3: TD505040EN-4: TD505040EN-5: TD505040EN-6: