Surgical GuideDental Surgical Guide for High-Precision, High-Accuracy

Designed for the fast, highly accurate production of surgical guides. Possessing industry-leading flexural stiffness and strength, DSG is ideal for precise orthodontic work that requires

tailored angle and depth. 

MATERIAL DATA SHEET

US : 940 Old County Rd, Belmont, CA, 94002, U.S.

CN : Room1017, Building S5, Jinyu Smart Factory, Building Material City Mid Road No.28, Haidian District, Beijing.

DSG

Strong Transparent Accurate Low Shrinkage

LuxCreo Metarial Properties – Surgical Guide

DSGLuxcreo‘s Dental Material DSG is a light-curing resin for the 3D printing of orthodontic surgical guides for use with LCD printers.

These data were determined in accordance with ISO and ASTM standards and are pursuant to LuxCreo Quality System. This document is valid without signature.

These data are typical values and were determined through testing on DLP printers which are validated for use with LuxCreo’s products. Mechanical properties will vary based on machine, part orientation, machine type, machine power, post curing of the printed parts, and cleaning. See product guide for post-processing procedure and best practices. Improper use or failure to adhere to the product guide may result in variations of color and mechanical properties. This product is suitable for the manufacturing of surgical guide, including tissue-supported guides, bone-supported guides, bone reduction guides, and CLP guides. LuxCreo reserves the right to change material characteristics, and formulation without prior notification.

Composition: methacrylate, photo-initiator, inhibitor, and pigment

Standard / Method Metric

DSG

Dental Surgical Guide 1-LCD

U.S.

U.S.

U.S.

427.8 ksi

10.2 ksi

4.1 %

0.364 ft-lbf/in

18.1 ksi

507.5 ksi

Metric

Metric

2950 MPa

70 MPa

4.1 %

19.4 J/m

85D

Metric

Metric

125 MPa

3500 MPa

1.1191 g/cm³

Tensile Properties, ASTM D638

Impact Properties, ASTM D256

Flexural Properties, ASTM D790

General Properties

Tensile Modulus

Ultimate Tensile Strength

Elongation at Break

Notched Izod (Machined), 23°C

Flexural Strength

Shore Hardness, ASTM D2240

Flexural Modulus

Density, ASTM D792

Thermal Properties, ASTM D648

Heat Deflection Temperature @0.455 MPa/66 psi 81.5 ℃ 178.7 ℉

U.S.Metric