swing assembly instructions - resource furniture · 2020. 9. 11. · swing structural hardware code...
TRANSCRIPT
-
Assembly InstructionsSwing With Chaise
-
WARNINGREAD CAREFULLY BEFORE BEGINNING INSTALLATION.IMPROPER INSTALLATION OF THE PRODUCT MAY CAUSE SERIOUS INJURY
Warranties for all products purchased from Resource Furniture, LLC are only valid if the product has been properly assembled, Installed by a trained professional, and operated in accordance with the assembly instructions.
Resource Furniture accepts no responsibility for any damage or injury caused by Improper Installation.
Installation must be performed by a licensed contractor or a trained professional, who will ensure proper assembly and installation.
Installation must be performed by at least 2 people.
Improper installation may result in permanent damage to the bed.
Improper installation of this product can cause serious or fatal injury.
All hardware must be properly tightened. No parts of the model should be left loose or unstable.
-
SWING MATTRESS SPECIFICATIONS
Recommended weight: ~ 64 lbs Recommended dimensions: 79 1/2 x 60 x 7”
1
SWING OVERVIEW
02
MATTRESS SWING
Recommended weight: ~ 64LbsRecommended dimensions: 79 1/2 x 60 x 7inches
SWING CHAISE
Freestanding
86 5/8
86 5/8
110 5/8
110 5/8
68 1/8
68 1/8
42 1/2
42 1/2
49 1/4
86 5/8
13 3/4
13 3/4
-
2
SWING OVERVIEW
-
1511
14
10
3
SWING OVERVIEW
-
SWING COMPONENTS
BOISERIE COMPONENTS
CODE QTY. COMPONENTS
1 1 Right side panel
2 1 Left side panel
3 1 Top horizontal panel
4 1 Base
5 2 Left/Right Small Side Panels (already attached to 1 & 2)
6 1 Right Back Panel
7 1 Left Back Panel
8 1 Bed Frame
9 1 Mattress Support Bar
10 1 Front Shelf
11 1 Sofa Seat & Storage Box
12 1 Sofa Arm Support Bracket
13 1 Sofa Arm
14 1 Sliding Chaise Seat
CODE QTY. COMPONENTS
15 1 Boiserie Panel
16 3 Shelf
4
-
SWING STRUCTURAL HARDWARECODE QTY. COMPONENT DESCRIPTION
A 13 7 x 36 6MA Pins
B 13 D15 L17 Cam Connectors
C 7 3.5 x 20 Wood screws for backpanels
D 4 5MA x 50 Machine bolt for side panels
E 6 4MA x 18 Machine bolt for mattresssupport bar
F 4 4 x 40 Wood screws for attaching toppanel to back panels
G 1 Spacer for sliding chaise
H 3 8MA x 80Machine bolt for attaching sofa arm support bracket to base
I 4 4 x 25 Machine bolts for front shelf
J 3 8MA Nut for attaching sofa armsupport bracket to base
K 4 D9 x 24 Washer for attaching sofaarm support bracket to base
L 2 8MA Machine bolt for attachingsliding chaise to side panel
M 4 6MA x 25 Machine bolts for attachingstorage box to base5
-
BOISERIE STRUCTURAL HARDWARECODE QTY. DESCRIPTION
N 6 Metal Shelf Sup-port
O 12
Machine Bolt to attach Metal Shelfsupport to Boiserie Panel
P 1 Cleat to attach Boi-serie Panel to wall
Q 6Q 6 Wall Anchor (concrete walls only)
A proper wall anchor suitable for the wall’s construction must be selected by the contractor or installer.
08
080808
6
-
STRUCTURE ASSEMBLY
1
2
Attach the (2) left side panel to the (4) base using 2 (D) screws.
Attach the (7) left back panel to the (2) left side panel using 3 (A) pins and 3 (B) cam connectors. Attach the (6) right back panel to the (7) left back panel with 3 (A) pins and 3 (B) cam connectors.
7
-
STRUCTURE ASSEMBLY
BB
AAFF
3
4
Attach the (3) top horizontal panel to the (2) left side panel with 2 (A) pins and 2 (B) cam connectors, and to the back panels with 4 (F) screws.
Attach the (1) right side panel to the (4) base using 2 (D) screws, and to the top horizontal panel and back panels with 5 (A) pins and 5 (B) cam connectors. Secure the back panels to the base using 4 (F) screws. These pieces are pre-assembled.
8
-
Wand Light Exploded Diagram
Cord Length = 118”
Front
Back
5
OPTIONAL WAND LIGHTINGDrill 1/2” hole at 21 3/8” below upperbed structure panel (from inside) and 1 1/2” in from the side. Install mounting plate with provided wood screws, aligning the 1/2” drill holes.
9
-
LEVELING THE STRUCTURE
det.14a
6 Ensure that the structure is level and plumb. To compensate for any floor unevenness, use the adjustable feet on the bottom panel (det. 1 4a) to level the structure.
10
-
7
8
BED FRAME ASSEMBLY
det.5a
Unscrew the safety plates fixed to the (4) base, as shown in det. 5a. The safety plates must be securely reattached after the levers are inserted. (see next page for details)
Position the (8) bed frame within the structure as shown. Place the levers located near the head of the bed frame into their slots as shown in det. 6a, and re-attach the safety plates from Image 5. Ensure that pins on the bedframe slide into the base of the structure as shown in det. 6b.
Note: It is recommended to USE proper floor protection around the work area, under the bed frame, so that the metal feet do not scratch the floor.
det.6b
det.6a
11
-
BED FRAME ASSEMBLY
9 Attach the (9) mattress support bar to the bed frame using six (E) machine bolts.
12
-
10
11
FRONT SHELF INSTALLATION
BED OPERATION
17
Installing the shelf
IMG.9: Attach the shelf to the feet of the bedframe, as shown, using 4 (I) screws.
OPENING THE BED
IMAGE 10:Grasp the handle in the center of the shelf and pull down the bed, gently accompanying the bed with both hands until it reaches the ground.
Attach the shelf to the feet of the bed frame, as shown, using 4 (I) screws.
Grasp the handle in the center of the shelf and pull down the bed, gently accompanying the bed with both hands until it reaches the ground.
13
-
MATTRESS & HEADBOARD INSTALLATION
12 Attach the headboard (if purchased by client) to the back of the structure. Secure the mattress to the bedframe by fastening the two buckled straps.
14
-
BED FRAME ADJUSTMENT
18
ADJUSTING THE TENSION ON THE BED FRAME SPRINGS
IMAGE 12To balance the bedframe, adjust the spring tension controllers with the 8mm allen wrench provided. Turn clockwise to adjust the tension in order to close the bed with ease. Ensuring that each side of the bedframe is adjusted equally.Note: An excessive number of turns may damage the cable.
ASSEMBLY OF THE BED & HEADBOARD
IMAGE 11Attach the headboard (if purchased by client) to the back of the structure. Secure the mattress to the bedframe by fastening the two buckled straps.
13 To balance the bedframe, adjust the spring tension controllers with the 8mm allen wrench provided. Turn clockwise to adjust the tension in order to close the bed with ease. Ensuring that each side of the bedframe is adjusted equally.
Note: An excessive number of turns may damage the cable.
15
-
BOISERIE PANEL ASSEMBLY
14
15 16
Installing the boiserie panel: Insert and fasten the M metal shelf pins into the holes on the (15) boiserie panel using 2 (O) bolts each.
Place the boiserie panel next to the bed and ensure panel is level and plumb. Attach the (P) wall : bracket to the wall using the proper wall anchor suitable for the wall construction. Then, hang the (15) boiserie panel on the bracket.
Slide the boiserie shelves (16) over the (N) metal shelf pins.
15
16
Installing the boiserie panel:IMG.15using 2 : (O) bolts each.Insert and fasten the M metal shelf pins into the holes on the (15) boiserie panel
IMG.16 Place the boiserie panel next to the bed and ensure panel is level and plumb.
Attach the (P) wall :
bracket to the wall using the (Q) wall anchors provided. (anchors for
concrete walls only) Then, hang the (15) boiserie panel on the bracket.
IMG.17: Slide the boiserie shelves (16) over the (N) metal shelf pins.
ASSEMBLY OF THE BOISERIE PANELS
2016
-
OPTIONAL SOFA ARM INSTALLATIONInstalling the sofa arm supportIMG.20: attach the sofa arm support bracket (12) to the base (4) using machine bolts n°38MAx80, n°3 washers D8-24 and nut 8MA, as shown in the image below;
IMG.21: Insert the sofa arm (13) into the sofa arm support bracket (12).
20
SWING MODEL WITH SOFA ARM
21
Installing the sofa arm support
IMG.20: attach the sofa arm support bracket (12) to the base (4) using machine bolts n°38MAx80, n°3 washers D8-24 and nut 8MA, as shown in the image below;
IMG.21: Insert the sofa arm (13) into the sofa arm support bracket (12).
20
SWING MODEL WITH SOFA ARM
21
17
18
To attach the sofa arm support bracket (12) to the base (4) using machine bolts n°3 8MAx80, n°3 washers D8-24 and nut 8MA, as shown in the image below;
Insert the sofa arm (13) into the sofa arm support bracket (12).
17
-
SOFA SEAT & STORAGE BOX INSTALLATION
19 Attach the sofa storage box (11) to the base (4) using (M) machine bolts.
Installing the sofa seat and storage box
IMG.22: Attach the sofa storage box (11) to the base (4) using (M) machine bolts..
22
18
-
SLIDING CHAISE INSTALLATION
det.23a
23
20
21
Attach the sliding chaise mechanism (14) to the side panel using machine bolts n°2 8MAx35; and to the base (4) using machine bolts n°1 8MAx60, n°1 SPACER and n°1 NUT 8MA as shown in Image (det.23a).
Position the sliding chaise (14) by placing the rails on top of the wheels.
19
-
SLIDING CHAISE OPERATION
22
23
The sliding chaise (14) starting from the closed position (flush with the front of the sofa seat);can be pulled forward into two different positions.
The head rest can be raised into the relax position. To bring it back into the sitting position; pull it forward completely to disengage the locking mechanism which allows it to be moved back.
Operating the sliding chaise seat
IMG.25: The sliding chaise (14) starting from the closed position (flush with the front of the sofa seat);can be pulled forward into two different positions.
IMG.26: The head rest can be raised into the relax position. To bring it back into the sitting position;pull it forward completely to disengage the locking mechanism which allows it to be moved back.
25
SWING CHAISE
2420
-
OPEN
ING
YOUR
SW
ING
BED
Nuovoliola Swing
SAFELY OPERATING YOUR SWING BED
Grasp the handle located in the middle of the shelf and pull with one hand, while supporting the top of the bed frame with the other as you walk backwards, allowing the bed frame to descend under control.
Make sure to support the bed frame with both hands for the entire descent until the shelf is firmly resting on the floor.
It may be necessary to gently push down on the bed frame for the final few inches.
Release the two mattress straps by squeezing the center of the clasp.
Tuck the straps under the mattress.
Sleep!
Prior to opening bed, remove any items taller than approx. 12.”
Remove back cushions.
To store the cushions or bedding under seat, lift sofa seat from bottom front edge for Swing.
If you have a coffee table, push table against sofa. DO NOT STAND ON TABLE! If you cannot reach shelf, move table aside.
Make sure that any and all items on shelf are stable and secure at all times.
1
2
3
4
5
21
-
CLOS
ING
YOUR
SW
ING
BED
ADDI
TION
AL IN
FORM
ATIO
N FO
R TH
E SW
ING
MOD
EL W
ITH
CHAI
SESAFELY OPERATING YOUR SWING BED
Stand in the middle of the bed, grasp front edge of bed frame and lift.
Continue to lift bed frame as you walk forward toward wall.
Push bed frame into structure until the bed frame is completely vertical.
Replace cushions.
To pull out or push in the chaise on the Swing, remove the back cushion first. You can then easily extend or retract the chaise without friction.
Remove pillows and tuck bedding in on all sides around mattress.
Close both mattress straps around the bedding.
To adjust the backrest of the Swing chaise, pull forward on the upholstered shelf of the chaise until you hear a “click”, then adjust to the position of your choice.
To return the support, pull forward until you hear the “click”, then push back to horizontal position.
1
1
2
2
NOTE: Your Swing is designed so that most bedding can remain on the bed when closed. If you experience difficulty closing the bed, your bedding might be too thick.
22
-
ResourceFurniture.com New
Yor
k Lo
s An
gele
sSa
n Fr
anci
sco
Was
hing
ton,
D.C
. To
ront
oCa
lgar
yVa
ncou
ver
Mex
ico
City