High-efficiency twin cyclone in optional, swing-away design assures complete cleaning for contamination-free color change.

Swing-Away Cyclone

© 2015 Nordson Corporation All Rights Reserved

PWL-15-5807 Issued 6/15

For more information, speak with your Nordson representative or contact your Nordson regional office.

United States Amherst, Ohio +1.800.433.9319 Phone +1.888.229.4580 Fax

Canada Markham, Ontario +1.905.475.6730 Phone

+1.800.463.3200 Phone

+1.905.475.8821 Fax

Europe Erkrath, Germany +49.211.9205.141 Phone +49.211.9252.148 Fax

Japan Tokyo, Japan +81.3.5762.2700 Phone +81.3.5762.2701 Fax

Asia/Australia/ Latin America Amherst, Ohio +1.440.985.4000 Phone 24-hour message service:

+1.440.985.4797

China Pudong, Shanghai +86.21.3866.9166 Phone

+86.21.3866.9199 Fax

The patent-pending Nordson Swing-Away Cyclone enables the upper and lower sections to be disconnected for thorough cleaning. With most powders, the interior surface of the cyclone can be cleaned with just a compressed air wand. Splitting the upper and lower cyclone sections helps make this easier and more effective. It takes Nordson’s long-standing approach – “if you can see it, you can clean it” – to another level. With the swing-away cyclone, you can actually “see, clean and touch” the entire interior surface to make absolutely certain it is clean.

With certain powder formulations that tend to “stick” to the interior walls of the cyclone, and some of the more challenging color-to-color combinations such as white to black, the swing-away cyclone also allows the entire interior surface to be “wiped” clean, to positively ensure contamination-free color change.

Features and Benefits

n Swing-away design provides easy access to top of cyclone to make sure the entire interior surface is clean.

n Enables physical removal of powder in areas where air alone may not.

n Designed for the most difficult-to-clean powders and challenging color-to-color combinations.

n Provides easy detection of contamination before the next powder is introduced.

n Allows operators to physically touch all the powder contact surfaces for easy, thorough cleaning.