swinging hinged doors replacement parts...

ECN CS-2479 J9044052 Rev W JAMISON DOOR COMPANY S/N 904405201

SWINGING HINGED DOORS REPLACEMENT PARTS LIST

JAMISON DOOR COMPANY P.O. BOX 70,

HAGERSTOWN, MARYLAND, USA 21741 (USA & Canada) 1-800-532-3667

(International) 301-733-3100 FAX: 240-329-5155

INTERNET: http://www.JamisonDoor.com E-MAIL: [email protected]

ECN CS-2479 2 J9044052 Rev W

JAMISON DOOR COMPANY Phone: (USA & Canada) 1-800-532-3667 (Int.) 301-733-3100 S/N 904405201

INDEX

SECTION TITLE PAGE

Instruction Sheet For Ordering Swing Door Replacement Parts 4

FASTENERS/LATCHES 6 1. W2 Single Point Wedgetight Fastener #4070 F1 6

2. W2 Two Point Interconnected Wedgetight Galv (F4A) & CHR (F4B) 8

3. W2 Three Point Interconnected Wedgetight Fastener Galv. (F5A) & Chr. (F5B) 10

4. *W2 Single Point Wedgetight Panic Fastener (For Back of Door) #4073 F6 12

5. *W2 Two Point Interconnected Wedgetight Panic Fastener (For Back of Door) #4074 F7 13

6. *W2 Single Point Wedgetight Panic Fastener With Bump Open Bar

(For Back of Door) F8 14

7. W2 Wedgetight Dutch Door Top Fastener # 4075 F9 15

8. 220 Top Fastener for Double Door #4099 F10 16

9. Conduit Fastener #4174 F11 18

10. E-Z Open One Point Fastener #4162 F12 19

11. E-Z Open Two Point Fastener #4042 F14 20

12. E-Z Open Two Point Super Freezer Fastener #4092 F15 22

13. Fire Door Latch Two Point Interconnected F16 24

14. Three Point Interconnected Smokehouse Fastener #4175 F17 25

15. Four Point Interconnected Smokehouse Fastener #4175 F18 26

16. Five Point Interconnected Smokehouse Fastener #4175 F19 28

17. Heavy Duty Cane Bolt Single Point and Interconnected F20 30

18. K56 Safety Release Fastener F22 32

18. K556, K778 Safety Release Fastener 33

19. K55 Safety Release Fastener F23 34

20. Dent Latches 35

21. GSH LA SS Latch 37

22. W99 Latch 38

GASKETS 39 23. Gaskets, Retainers G1 39

24. Gaskets, Retainers G2 41

HINGES 43

25. JB Adjustoflex Hinge #4026 H3 43

26. JB Self Raising Adjustoflex Hinge #4233 H4 44

27. JA Adjustoflex Hinge #4025 H1 45

28. JS Rigid Hinge #4025 H2 46

29. JC Adjustoflex Hinge #4027 H5 47

30. JR Rigid Hinge #4053 H6 48

31. JF Rigid Hinge (Fire Door) H7 49

32. Smokehouse Hinge #4175 H8 50

33. Super Freezer Door Hinge #4047 H9 51

34. AP Type Heavy Duty Hinge w/Thrust Bearing (Galv.) #4043 H10 52

35. AP Type Heavy Duty Hinge w/Ball Bearing (Galv.) #4043 H11 53

36. AP Type Heavy Duty Hinge (Chr) #4240 H12 54

37. Kason Hinges H13 55

38. Dent Hinges 58

39. Cam-n-Ball Two-Way Gravity Hinges (For Auto-Close Doors) H14 59

40. B3044-8 Double Acting Hinge (For Mailing Vestibule Door) H15 61

ECN CS-2479 3 J9044052 Rev W


41. CS1-AP Double Acting Hinge (For Mailing Vestibule Door) H16 62

42. GSH Hinge 63

MISCELLANEOUS 64

43. Windows Replacement Double Acting Doors M13 64

44. Windows Replacement Post Office Doors M14 65

45. Miscellaneous Hardware M18 66

46. 400 Door Closer #4062 M9 67

47. Norton Door Closer M10 69

48. Panic Bump Open Bar #4346 M2 70

49. Trilogy Exit Trim 71

50. Von Duprin 992L Exit Trim 72

51. Taco/Cal-Royal Bump Open Bar 73

52. Cal-Royal Lever Exit Trim 73

53. Dent D-70 Bump Bar 74

54. Frostop Cable System M11 75

55. Spring Steel Bumpers For Double Acting Doors M16 76

56. Hook and Bumper M17 77

57. Flexible Rubber Track Flaps M12 78

58. Spring Assist For Auto-Close and Post Office M15 79

59. 1095 Spring Action Door Closer 79

60. 1097 Door Closer 80

61. D-897 Door Closer 81

62. JamECO Control Box 82

*W2 Panic Fasteners installed on back of door only

ECN CS-2479 4 J9044052 Rev W


INSTRUCTION SHEET FOR ORDERING SWING DOOR REPLACEMENT PARTS

NOTES:

1. Sufficient information must be included with all orders so that we can give prompt and accurate service. The specific information needed includes: a. The stock number, part number and name of the part

I. It is best to use the part number (numbers and letters) appearing on the part(s) to be replaced. If this number is not legible, use the stock number and part number given in the parts list for the part(s) in question. Also state when the original parts were purchased.

b. Right or left-hand door (see diagrams "A" and "B") I. As shown in the diagrams, a door is a left-hand (LH) type if the hinges are on the left when facing the

door. The door is a right-hand (RH) if the hinges are on the right. For double doors, specify which leaf is active (the active leaf is the one that opens first).

c. Any Required Offset (See Diagrams "A" and "B") I. Standard Jamison doors are either "flush" (F) or “offset" (O). The difference is apparent in the diagrams.

With "flush" doors, the face of the door-front and the face of the door-frame casing are in the same plane.

II. With "Offset" doors, the offset dimension must be included in the order. To determine this dimension, close the door tightly and measure the distance from the face of the door-frame casing to the face of the door front.

d. Hardware Finish I. Galvanized (Galv), chrome (Chr), bright chrome (BChr), stainless steel (SST), or Tuffkote finish (similar

to gray paint). Other coatings may be available see the applicable parts lists for information. e. Door Thickness (See Diagram "B")

I. For doors equipped with fasteners having thru rod assemblies, measure the overall door thickness. f. Cooler or Freezer

I. For doors equipped with fasteners having thru rod assemblies, specify cooler or freezer door so that the correct material can be furnished.

2. Parts highlighted in gray are no longer available.

ECN CS-2479 5 J9044052 Rev W


THIS PAGE LEFT BLANK

ECN CS-2479 6 J9044052 Rev W


FASTENERS/LATCHES

1. W2 SINGLE POINT WEDGETIGHT FASTENER #4070

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Chr F Complete Fastener 4070-001-02 4070-1 Assy. Chr 1-1/8” Complete Fastener 4070-001-04 4070-1 Assy. Chr 1-3/8” Complete Fastener 4070-001-06 4070-1 Assy. Galv F Complete Fastener 4070-001-01 4070-1 Assy. Galv 1-1/8” Complete Fastener 4070-001-03 4070-1 Assy. Galv 1-3/8” Complete Fastener 4070-001-05 4070-1 1 a Galv O Keeper Housing 4070-009-01 4070-9 1 a Chr O Keeper Housing 4070-009-02 4070-9 1X b Galv F Keeper Housing 4070-008-01 4070-8 1X b Chr F Keeper Housing 4070-008-02 4070-8 2 ab Plunger (Nickel Plated) 4070-010-02 4070-10 2 ab Chr Plunger 4070-010-03 4070-10 3 Plunger Spring (Heavy) (Black) 482-037 4070-11 3 ab Plunger Spring (Medium) (Aluminum) 482-038 4070-11 4 ab Plunger Clip (Nickel Plated) 4070-012-01 4070-12 4 ab Chr Plunger Clip 4070-012-02 4070-12 5 Galv 1-1/8” Keeper Base 070-005-01 4070-5 5 Chr 1-1/8” Keeper Base 4070-005-02 4070-5 5 Galv 1-3/8” Keeper Base 4070-006-11 4070-6 5 Chr 1-3/8” Keeper Base 4070-006-02 4070-6 Galv O Keeper Assy. (Consists of Items in Group (a)) 4070-003-02 4070-3 Chr O Keeper Assy. (Consists of Items in Group (b)) 4070-003-04 4070-3 Galv F Keeper Assy. (Consists of Items in Group(b)) 4070-002-02 4070-2 Chr F Keeper Assy. (Consists of Items in Group (b)) 4070-002-04 4070-2 6 c Galv Bedplate with Tang and Rivets 4070-015-01 4070-15 6 c Chr Bedplate with Tang and rivets 4070-015-02 4070-15 7 c Galv Front Handle with Pin 4070-018-01 4070-18 7 c Chr Front Handle with Pin 4070-018-02 4070-18 8 c Handle Spring 482-041 4070-19 9 c Galv Fulcrum Pin 4070-020-01 4070-20

ECN CS-2479 7 J9044052 Rev W


Continued

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 9 c Chr Fulcrum Pin 4070-020-02 4070-20 Galv Bedplate Assy. Complete (Consists of Items in Group (c)) 4070-004-01 4070-4 Chr Bedplate Assy. Complete (Consists of Items in Group (c)) 4070-004-02 4070-4 10 Galv Thru Rod with Knob, (2) Felt Washers and Cotter Pin (Cooler Only) 4” 4067-001-21 4067-1 10 Galv Thru Rod with Knob, (2) Felt Washers and Cotter Pin (Cooler Only) 6” 4067-001-23 4067-1 10 Galv Thru Rod with Knob, (2) Felt Washers and Cotter Pin (Cooler Only) 8” 4067-001-25 4067-1 10 Chr Thru Rod with Knob, (2) Felt Washers and Cotter Pin (Cooler Only) 4” 4067-017-01 4067-17 10 Chr Thru Rod with Knob, (2) Felt Washers and Cotter Pin (Cooler Only) 6” 4067-017-02 4067-17 10 Chr Thru Rod with Knob, (2) Felt Washers and Cotter Pin (Cooler Only) 8” 4067-017-03 4067-17 11 Galv Plastic Thru Rod with Knob, (2) Felt Washers End Cap and Pins (Freezer Only) (9-1/8”) 4067-009-01 4067-9 11 Galv Plastic Thru Rod with Knob, (2) Felt Washers End Cap and Pins (Freezer Only) (11-1/8”) 4067-009-02 4067-9 11 Chr Plastic Thru Rod with Knob, (2) Felt Washers End cap and Pins (Freezer Only) 4067-009 4067-9 12 Galv Combination Door Pull and Escutcheon 4038-003-11 4038-3 12 Chr Combination Door Pull and Escutcheon 4038-003-02 4038-3 13 Fiber O Shims for Offset Keeper (1/16”) 4070-029-01 4070-29 13 PP O Shims for Offset Keeper (1/16”) 4070-029-02 4070-29 14 Fiber F Shims for Flush Keeper (1/16”) 4070-045-01 4070-45 14 PP F Shims for Flush Keeper (1/16”) 4070-045-02 4070-45 15 Galv F Shims for Flush Keeper (9/16”) 4070-031-01 4070-31 16 Chr Plunger Wear Plate w/Screws for Keeper Housing (Not Shown) 4070-026-01 4070-26

Note: When ordering please specify door WIC, HIC, thickness, and swing.

ECN CS-2479 8 J9044052 Rev W


2. W2 TWO POINT INTERCONNECTED WEDGETIGHT GALV (F4A) & CHR (F4B)

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv F Complete Fastener 4159-021-01 4159-21 Assy. Chr F Complete Fastener 4071-001-01 4071-1 Assy. Galv 1-1/8” Complete Fastener 4159-021-02 4159-21 Assy. Chr 1-1/8” Complete Fastener 4071-001-02 4071-1 Assy. Galv 1-3/8” Complete Fastener 4159-021-03 4159-21 Assy. Chr 1-3/8” Complete Fastener 4071-001-03 4071-1 1 a Galv O Keeper Housing 4070-009-01 4070-9 1 a Chr O Keeper Housing 4070-009-02 4070-9 1X b Galv F Keeper Housing 4070-008-01 4070-8 1X b Chr F Keeper Housing 4070-008-02 4070-8 2 ab Plunger (Nickel Plated) 4070-010-02 4070-10 3 Plunger Spring (Heavy) (Black) 482-037 4070-11 3 ab Plunger Spring (Med.) (Alum) 482-038 4070-11 4 ab Plunger Clip (Nickel Plate) 4070-012-01 4070-12 5 Galv 1-1/8” Keeper Base 4070-005-01 4070-5 5 Chr 1-1/8” Keeper Base 4070-005-02 4070-55 5 Galv 1-3/8” Keeper Base 4070-006-11 4070-6

ECN CS-2479 9 J9044052 Rev W


Continued

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 5 Chr 1-3/8” Keeper Base 4070-006-02 4070-6 Assy. Galv O Keeper Assy. (Consists of Items in Group (a)) 4070-003-02 4070-3 Assy. Chr O Keeper Assy. (Consists of Items in Group (a)) 4070-003-04 4070-3 Assy. Galv F Keeper Assy. (Consists of Items in Group (b)) 4070-002-02 4070-2 Assy. Chr F Keeper Assy. (Consists of Items in Group (b)) 4070-002-04 4070-2 6 c Main Bedplate w/Tang and Rivets (Nickel Plated) 4159-011-01 4159-11 6X c Chr Main Bedplate w/Tang and Rivets 4071-004-01 4071-4 7 c Top Bedplate w/ Tang and Rivets (Nickel Plated) 4159-003-01 4159-3 7X c Chr Top Bedplate w/Tang and Rivets 4071-006-01 4071-6 8 c Galv Front Operating Handle 4159-002-01 4159-2 8 Chr Front Operating Handle 4159-002-02 4159-2 9 c Galv Operating Pawl 4159-004-01 4159-4 9 c Chr Operating Pawl 4059-004-02 4159-4 10 c Handle and Pawl Set Screws 767-304 4159-15 11 c Handle and Pawl Spring 482-018 4159-5 12 c Galv Interconnecting Rod (7/8” Dia.) Specify Length) 38-3/4” Long 4159-012-01 4159-12 54-1/2” Long 4159-012-02 4159-12 68” Long 4159-012-03 4159-12 58-1/4” Long 4159-012-04 4159-12 12 c Chr Interconnecting Rod (3/4” Dia.) (Specify Length) 4071-009 4071-9 13* Thru Rod with Knob Washer and Cotter Pin (Cooler Only) Galv For a 4” Thick Door 4067-001-01 4067-1 Galv For a 6” Thick Door 4067-001-03 4067-1 14* Plastic Thru Rod w/Knob End caps and Pins (Freezer Only) Galv For a 4” Thick Door 4067-009-01 4067-9 Chr For a 4” Thick Door 4067-009-05 4067-9 Galv For a 6” Thick Door 4067-009-02 4067-9 Chr For a 6” Thick Door 4067-009-06 4067-9 15 Galv Combination Door Pull and Escutcheon 4038-003-11 4038-3 15 Chr Combination Door Pull and Escutcheon 4038-003-02 4038-3 16 Fiber O Shims for Offset Keeper (1/16”) 4070-029-01 4070-29 16 PP O Shims for Offset Keeper (1/16”) 4070-029-02 4070-29 17 Fiber F Shims for Flush Keeper (1/16”) 4070-045-01 4070-45 17 PP F Shims for Flush Keeper (1/16”) 4070-045-02 4070-45 18 Galv Bedplate Assy. 4159-001-01 4159-1 18 Bedplate Assy. (Consisting of Items in Group (c)) 4071-002-01 4071-2 19 Felt Washer (Two Reqd.) 753-354 * Does not come with felt washers. If you need felt washers please also add item 19 to your order.

Note: See instruction sheet for ordering parts. Also state the distance between bedplate centers.

ECN CS-2479 10 J9044052 Rev W


3. W2 THREE POINT INTERCONNECTED WEDGETIGHT FASTENER GALV. (F5A) & CHR. (F5B)

ECN CS-2479 11 J9044052 Rev W


Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv F Complete Fastener 4072-001-01 4072-1 Assy. Chr F Complete Fastener 4072-008-01 4072-8 Assy. Galv 1-1/8” Complete Fastener 4072-001-02 4072-1 Assy. Chr 1-1/8” Complete Fastener 4072-008-02 4072-8 Assy. Galv 1-3/8” Complete Fastener 4072-001-03 4072-1 Assy. Chr 1-3/8” Complete Fastener 4072-008-03 4072-8 1 a Galv O Keeper Housing 4070-009-01 4070-9 1 a Chr O Keeper Housing 4070-009-02 4070-9 1X b Galv F Keeper Housing 4070-008-01 4070-8 1X b Chr F Keeper Housing 4070-008-02 4070-8 2 ab Plunger 4070-010-02 4070-10 3 Plunger Spring (Heavy) (Black) 482-037 4070-11 3 ab Plunger Spring (Med.) (Alum.) 482-038 4070-11 4 ab Plunger Clip (Nickel Plate) 4070-012-01 4070-12 5 Galv 1-1/8” Keeper Base 4070-005-01 4070-5 5 Chr 1-1/8” Keeper Base 4070-005-02 4070-5 5 Galv 1-3/8” Keeper Base 4070-006-11 4070-6 5 Chr 1-3/8” Keeper Base 4070-006-02 4070-6 Assy. Galv O Keeper Assy. (Consists of Items in Group (a)) 4070-003-02 4070-3 Assy. Chr O Keeper Assy. (Consists of Items in Group (a)) 4070-003-04 4070-3 Assy. Galv F Keeper Assy. (Consists of Items in Group (b)) 4070-002-02 4070-2 Assy. Chr F Keeper Assy. (Consists of Items in Group (b)) 4070-002-04 4070-2 6 c Bedplate with Tang and Rivets 4159-003-01 4159-3 6X c Chr Bed Plate With Tangs and Rivets 4071-006-01 4071-6 7 c Galv Front Operating Handle 4072-003-01 4072-3 7 c Chr Front Operating Handle 4072-003-02 4072-3 8 c Galv Operating Pawl 4159-004-01 4159-4 8 c Chr Operating Pawl 4159-004-02 4159-4 9 c Handle and Pawl Set Screws 767-304 4159-15 10 c Handle and Pawl Spring 482-018 4159-5 11 c Galv Interconnecting (7/8” Diameter) 58-1/4” Long 4072-004-01 4072-4 Custom Length 4072-004-02 4072-4 11 c Chr Interconnecting (7/8” Dia.) Custom Length 4072-009-02 4072-9 12* Galv Thru Rod w/Knob, & Roll Pin (Cooler Only) 4069-045-03 4069-45 12* Chr Thru Rod w/Knob, (2) Felt Washers & Roll Pin (Cooler Only) 4069-045-04 4069-45 13* Plastic Thru Rod w/Knob End Caps and Pins (Freezer Only) Galv For a 4” Thick Door 4067-009-01 4067-9 Chr For a 4” Thick Door 4067-009-05 4067-9 Galv For a 6” Thick Door 4067-009-02 4067-9 Chr For a 6” Thick Door 4067-009-06 4067-9 14 Galv Thru Rod Escutcheon 4188-046-01 4018-4 14 Chr Thru Rod Escutcheon 4188-046-02 4018-4 15 Back Door Pull (Alum.) 251-010 4038-1 15 Chr Back Door Pull 4038-004-01 4038-4 16 Fiber O Shims for Offset Keeper (1/16”) 4070-029-01 4070-29 16 PP O Shims for Offset Keeper (1/16”) 4070-029-02 4070-29 17 Fiber F Shims for Flush Keeper (1/16”) 4070-045-01 4070-45 17 PP F Shims for Flush Keeper (1/16”) 4070-045-02 4070-45 18 Galv Bedplate Assy. (Consisting of Items in Group (c)) 4072-002-01 4072-2 18 Chr Bedplate Assy. (Consisting of Items in Group (c)) 4072-010-01 4072-10 19 Felt Washer (2 Reqd.) 753-354 * Does not come with felt washers. If you need felt washers please also add item 19 to your order.


ECN CS-2479 12 J9044052 Rev W


4. W2 SINGLE POINT WEDGETIGHT PANIC FASTENER (BACK OF DOOR) #4073 F6

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv Complete One Point Panic Fastener 4073-001-01 4073-1 1 Chr Keeper Housing 4073-003-02 4073-3 2 Plunger Clip (Nickel Plate) 4070-012-01 4070-12 2 Chr Plunger Clip 4070-012-02 4070-12 3 Plunger Spring 482-038 4070-11 4 Plunger (Nickel Plate) 4073-009-01 4073-9 4 Chr Plunger 4073-009-02 4073-9 5 Galv Keeper Base (LH) 4073-010-01 4073-10 5 Galv Keeper Base (RH) 4073-010-51 4073-10 5 Chr Keeper Base 4073-010-02 4073-10 6 Galv Handle 4073-004-01 4073-4 6 Chr Handle 4073-004-02 4073-4 7 Galv Handle Pin (1/4” x 1-1/2”) 755-003 7 Chr Handle Pin (1/4”x 1-1/2”) 755-200 8 Galv Handle Stop Block 4073-005-01 4073-5 8 Chr Handle Stop Block 4073-005-02 4073-5 9 Galv Astragal Plate (for Double Door) 4073-006-01 4073-6 9 Chr Astragal Plate (for Double Doors) 4073-006-02 4073-6 10 Galv Frame Locking Plate for Single Door 4073-007-01 4073-7 10 Chr Frame Locking Plate for Single Door 4073-007-02 4073-7 11 Galv Shim for Frame Locking Plate (3/8”) 4073-008-01 4073-8 11 Chr Shim for Frame Locking Plate (3/8”) 4073-008-02 4073-8 12 Fiber Shim for Astragal Plate (1/16”) 4073-011-01 4073-11 12 PP Shim for Astragal Plate (1/16”) 4073-011-02 4073-11 13 SST Plunger Wear Plate with Screws 4070-026-01 14 SST Handle Spacer with Screws 4073-030-01 15 Galv Bolt and Nut (for Attaching Keeper Base to Housing) (Bolt) (Nut) 764-208 752-104 15 Bolt and Nut w/Washer (For Attaching Keeper (Bolt) (Nut) (Washer) Base to Housing) 764-506 752-150 753-151 16 Chr Frame Strike (for 4” Insulated Jamolite Door) (Chrome Only) 4073-013-01 4073-13 17 Chr Keeper Mounting Plate (for 6” Insulated Jamolite Door) (Chrome Only) 4073-028-01 4073-28 18 Galv Back Door Pull 251-010 4038-1 18 Chr Back Door Pull 4038-001-02 4038-1


ECN CS-2479 13 J9044052 Rev W


5. W2 TWO POINT INTERCONNECTED WEDGETIGHT PANIC FASTENER (FOR BACK OF DOOR) #4074 F7

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete Two Point Interconnected W2 Panic Fastener (for a Single Door or Double Door with 1 3/8” Astragal) 4074-012-01 4074-12 1 Chr Keeper Housing 4073-003-02 4073-3 2 Galv Plunger Clip 4070-012-01 4070-12 3 Plunger Spring 482-038 4070-11 4 Plunger (Nickel Plate) 4073-009-01 4073-9 5 Galv Keeper Base (LH Only) 4073-010-01 4073-10 6 Operating Handle with Pin 4074-010-01 4074-10 7 Operating Rod (up to 8’ 0” Long) 4074-008-05 4074-8 8 Bearing for Operating Rod 4074-007-01 4074-7 9 Operating Crank with Pin 4074-006-01 4074-6 10 Plunger Pin (1/4” x 1-3/4”) 755-003 11 Frame Locking Plate (for Single Door) 4073-007-01 4073-7 12 Astragal Plate (for Double Door) 4073-006-01 4073-6 13 Back Door Pull 251-010 4038-1 14 Bolt and Nut (for Attaching Keeper Base to Housing) (Bolt) (Nut) 764-208 752-104 15 Fiber Shim for Keeper Base (1/16”) 4070-029-01 4070-29 15 PP Shim for Keeper Base (1/16”) 4070-029-02 4070-29 16 Galv Shim for Frame Locking Plate (3/8”) 4073-008-01 4073-8 17 Fiber Shim for Astragal Plate (1/16”) 4073-011-01 4073-11 17 PP Shim for Astragal Plate (1/16”) 4073-011-02 4073-11 18 Shim for Bearing (1/16”) 4074-017-01 4074-17


ECN CS-2479 14 J9044052 Rev W


6. W2 SINGLE POINT WEDGETIGHT PANIC FASTENER WITH BUMP OPEN BAR (BACK OF DOOR) F8

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete W2 Panic Bump Open Assy. Fastener 4073-014 4073-14 1 Galv Keeper Housing 4073-003-01 4073-3 1 Chr Keeper Housing 4073-003-02 4073-3 2 Galv Plunger Clip 4070-012-01 4070-12 2 Chr Plunger Clip 4070-012-02 4070-12 3 Plunger Spring 482-038 4070-11 4 Galv Plunger 4073-009-01 4073-9 4 Chr Plunger 4073-009-02 4073-9 5 Galv Keeper Base 4073-010-01 4073-10 5 Chr Keeper Base 4073-010-02 4073-10 6 Galv Operating Link 4073-020-01 4073-20 6 Chr Operating Link 4073-020-02 4073-20 7 Galv Plunger Pin (1/4”x1-3/4”) 755-003 7 Chr Plunger Pin (1/4”x1-3/4”) 755-200 8 Galv Bump Open Bar Link 4124-003-01 4124-3 8 Chr Bump Open Bar Link 4124-003-02 4124-3 9 Galv Astragal Plate (for Double Door) 4073-006-01 4073-6 9 Chr Astragal Plate (for Double Door) 4073-006-02 4073-6 10 Galv Frame Locking Plate (for Single Door) 4073-007-01 4073-7 10 Chr Frame Locking Plate (for Single Door) 4073-007-02 4073-7 11 Galv Shim for Frame Locking Plate (3/8”) 4073-008-01 4073-8 11 Chr Shim for Frame Locking Plate (3/8”) 4073-008-02 4073-8 12 Fiber Shim for Astragal Plate (1/16”) 4073-011-01 4073-11 12 PP Shim for Astragal Plate (1/16”) 4073-011-02 4073-11 13 Galv Bump Open Bar (Up Thru 5’0” Width in Clear) 4051-2 13 Chr Bump Open Bar (Up Thru 5’0” Width in Clear) 4051-2 13 Galv Bump Open Bar (From 5’6” to 7’0” Width in Clear) 4051-3 13 Chr Bump Open Bar (From 5’6” to 7’0” Width in Clear) 4051-3 14 Galv Bump Open Bar Pin 4175-074-01 4175-74

14 Chr Bump Open Bar Pin 4124-013-01 4124-13 15 Chr Plunger Wear Plate w/Screws (Chrome Only) 4070-026-01 4070-26 16 Chr Handle Spacer w/Screws (Chrome Only) 4073-030-01 4073-30 17 Bolt and Nut (for Attaching Keeper to Base) (Bolt) (Nut) 764-208 752-104 17 Bolt, Nut, and Washer (for Attaching Keeper to Base) (Bolt) (Nut) (Washer) 764-506 752-150 753-151 18 Galv Back Door Pull 251-010 4038-1 18 Chr Back Door Pull 4038-001-02 4038-4

Note: See instruction sheet for ordering parts. Also state the WIC of the opening.

ECN CS-2479 15 J9044052 Rev W


7. W2 WEDGETIGHT DUTCH DOOR TOP FASTENER #4075 F9 Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv F Complete Fastener 4075-001-01 4075-1 Assy. Chr F Complete Fastener 4075-005-01 4075-5 Assy. Galv 1-1/8” Complete Fastener 4075-001-02 4075-1 Assy. Chr 1-1/8” Complete Fastener 4075-005-02 4075-5 Assy. Galv 1-3/8” Complete Fastener 4075-001-03 4075-1 1 a Galv O Keeper Housing 4070-009-01 4070-9 1 a Chr O Keeper Housing 4070-009-02 4070-9 1X b Galv F Keeper Housing 4070-008-01 4070-8 1X b Chr F Keeper Housing 4070-008-02 4070-8 2 ab Plunger (Nickel Plated) 4070-010-02 4070-10 2 ab Chr Plunger 4070-010-03 4070-10 3 Plunger Spring (Heavy) (Black) 482-037 4070-11 3 ab Plunger Spring (Medium) (Aluminum) 482-038 4070-11 4 ab Galv Plunger Clip 4070-012-01 4070-12 4 ab Chr Plunger Clip 4070-012-02 4070-12 5 Galv 1-1/8” Keeper Base 4070-005-01 4070-5 5 Chr 1-1/8” Keeper Base 4070-005-02 4070-5 5 Galv 1-3/8” Keeper Base 4070-006-11 4070-6 + Galv O Keeper Assy. (Consists of Items in Group (a)) 4070-003-02 4070-3 + Chr O Keeper Assy. (Consists of Items in Group (a)) 4070-003-04 4070-3 + Galv F Keeper Assy. (Consists of Items in Group (b)) 4070-002-02 4070-2 + Chr F Keeper Assy. (Consists of Items in Group (b)) 4070-002-04 4070-2 6 Galv Fastener Bedplate Plate w/Tang and Rivets 4159-003-01 4159-3 7 Chr Fastener Bedplate Plate w/Tang and Rivets 4071-006-01 4071-6 8 Galv Operating Pawl 4159-004-01 4159-4 8 Chr Operating Pawl 4159-004-02 4159-4 9 Spring for Operating Pawl 482-018 4159-5 10 Pawl Set Screw 767-304 4159-15 11 Galv Rod Guide 4075-003-01 4075-3 12 Chr Rod Guide 4075-003-02 4075-3 13 Handle w/Pin 4074-010-01 4074-10 13 Handle w/Pin 4074-010-02 4074-10 14 Fiber O Shims for Offset Keeper (1/16”) 4070-029-01 4070-29 14 PP O Shims for Offset Keeper (1/16”) 4070-029-02 4070-29 14 Fiber F Shims for Flush Keeper (1/16”) 4070-045-01 4070-45 14 PP F Shims for Flush Keeper (1/16”) 4070-045-02 4070-45

Note: See instruction sheet for ordering parts. Also state the HIC of the opening.

ECN CS-2479 16 J9044052 Rev W


8. 220 TOP FASTENER FOR DOUBLE DOOR # 4099 F10

ECN CS-2479 17 J9044052 Rev W


Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy.* Galv Complete Fastener (with Pull Handle) 4099-001-X1 4099-1 Assy.* Chr Complete Fastener (with Pull Handle) 4099-001-X2 4099-1 1 Galv Housing 4099-002-01 4099-2 1 Chr Housing 4099-002-02 4099-2 2 Galv Latch Plate 4099-003-01 4099-3 2 Chr Latch Plate 4099-003-02 4099-3 3 Galv Slide Bolt with Roller Sub-Assy. 4099-004-01 4099-4 3 Chr Slide Bolt with Roller Sub-Assy. 4099-004-02 4099-4 4 Galv O Keeper 4099-007-01 4099-7 4 Chr O Keeper 4099-007-02 4099-7 4X Galv F Keeper 4099-012-01 4099-12 4X Chr F Keeper 4099-012-02 4099-12 5 Galv Spring 482-015 4099-8 6 Galv Pull Handle with Pin 4099-020-01 4099-20 6 Chr Pull Handle with Pin 4099-020-02 4099-20 7 Galv Clevis 4076-005-01 4076-5 7 Chr Clevis 4076-005-02 4076-5 8 Galv Pin 755-006 4062-16 8 Chr Pin 755-202 4062-18 9 Galv Jam Nut 752-110 9 Chr Jam Nut 752-153 10 Galv Rod Guide Assy. 4081-001-01 4081-1 10 Chr Rod Guide Assy. 4081-001-02 4081-1 11* Galv Pull Handle Rod 4099-021-X1 4099-21 11* Chr Pull Handle Rod 4099-021-X2 4099-21 12 Fiber O Keeper Shim (1/16”) 4099-033-01 4099-33 12 O Keeper Shim (1/8”) 4099-033-02 4099-33 12 PP O Keeper Shim (1’16”) 4099-033-03 4099-33 12X Galv F Keeper Shim (1/16”) 4099-028-01 4099-28 12X Chr F Keeper Shim (1/16”) 4099-028-02 4099-28 13 Roller 4099-006-01 4099-6 14 Pin 755-251 4099-10 *When ordering, serial number of door required

Note: See instruction sheet for ordering parts.

ECN CS-2479 18 J9044052 Rev W


9. CONDUIT FASTENER # 4174 F11

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv 1-1/4 Complete Conduit Lever Fastener with Wedge for Hinged Doors 4174-001-01 4174-1 Assy. Chr 1-1/4 Complete Conduit Lever Fastener with Wedge for Hinged Doors 4174-001-02 4174-1 1 Galv Base 4148-003-01 4148-3 1 Chr Base 4148-003-02 4148-3 2 Galv Handle 4174-002-01 4174-2 2 Chr Handle 4174-002-02 4174-2 3 Galv Wedge 4174-004-01 4174-4 3 Chr Wedge 4174-004-02 4174-4 4 Galv Bolt 751-435 4 Chr Bolt 751-510 5 Galv Washer 753-017 5 Chr Washer 753-155 6 Fiber Shim for Base (1/16”) 4148-009-01 4148-9


ECN CS-2479 19 J9044052 Rev W


10. E-Z OPEN ONE POINT FASTENER #4162 F12

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv Complete 1 Point E-Z Open Fastener Left Hand: 1-Front Handle Assy. 1-Back Handle Assy. 1-Roller Housing Assy. 1-Back Contact Block 4162-001-01 4162-1 Assy. Galv Complete 1 Point E-Z Open Fastener Right Hand: 1-Front Handle Assy. 1-Back Handle Assy. 1-Roller Housing Assy. 1-Back Contact Block 4162-001-51 4162-1 Assy. Chr Complete 1 Point E-Z Open Fastener Includes: 1-Front Handle Assy. 1-Back Handle Assy. 1-Roller Housing Assy. 1-Back Contact Block Contact Factory 4162-1 1 Roller Housing Assy. and Parts F14 2 a Galv Combination Handle 4162-002-01 4162-2 2 a Chr Combination Handle 4162-002-02 4162-2 3 a Galv Handle Base 4162-003-01 4162-3 3 a Chr Handle Base 4162-003-02 4162-3 4 ab Front or Back Handle Spring 482-008 4042-15 5 ab Galv Front or Back Handle Pin 4042-016-01 4042-16 5 ab Chr Front or Back Handle Pin 4042-078-01 4042-78 6 b Galv Back Handle 4042-030-01 4042-30 6 b Chr Back Handle 4042-030-02 4042-30 7 b Galv Back Handle Base 4042-019-01 4042-19 7 b Chr Back Handle Base 4042-019-02 4042-19 8 Galv Back Contact Block 4042-021-11 4042-21 8 Chr Back Contact Block 4042-021-02 4042-21 9 Fiber Shim for Roller Housing (1/16”) 4202-017-01 4202-17 9 PP Shim for Roller Housing (1/16”) 4202-017-02 4202-17 10 Galv Front Handle Assy. (Consists of Items in Group a) LH 4162-006-01 4162-6 10 Galv Front Handle Assy. (Consists of Items in Group a) RH 4162-006-51 4162-6 11 Galv Back Handle Assy. (Consists of Items in Group b) LH 4042-018-01 4042-18 11 Galv Back Handle Assy. (Consists of Items in Group b) RH 4042-018-51 4042-18 *Available in “Offset” Only


ECN CS-2479 20 J9044052 Rev W


11. E-Z OPEN TWO POINT FASTENER #4042 F14

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete Two Point Fastener Includes: 2- Roller Housing Assy. with Strike 1-Front Handle Assy. with Contact Blocks 1-Back Handle Assy. with Contact Blocks Galv Flush 4042-100-01 4042-100 Chr Flush 4042-100-02 4042-100 Galv 1-1/4” Offset 4042-100-03 4042-100 Chr 1-1/4” Offset 4042-100-04 4042-100 1 a Galv Housing 4202-002-01 4202-2 1 a Chr Housing 4202-002-02 4202-2 2 a Galv Roller Link 4202-004-11 4202-4 2 a Chr Roller Link 4202-004-12 4202-4 3 a Roller 931-002 4202-16 4 a Galv Roller Pin 4202-006-01 4202-6 4 a Chr Roller Pin 4202-014-01 4202-14 Assy. Galv Roller Link with Roller and Roller Pin (Consists of Items 2,3, and 4) 4202-021-01 4202-21 Assy. Chr Roller Link with Roller and Roller Pin (Consists of Items 2,3, and 4) 4202-021-02 4202-21 5 a Roll Pin (3/8” X3 ¼”) 754-018 6 b Spring (Light) (Black) 482-022 4277-166 6 c Spring (Medium) (Brown) 482-021 4202-8 7 a Galv Spring Adjustment Bolt with Washer (Bolt) (Washer) 751-406 753-002 4202-9 7 a Chr Spring Adjustment Bolt with Washer (Bolt) (Washer) 751-500 753-002 4202-11 8 a Spring Adjustment Lug 4202-003-01 4202-3 Assy. Galv Roller Housing Assy. (Consists of Items in Group (a & c)) 4202-001-01 4202-1 Assy. Chr Roller Housing Assy. (Consists of items in Group (a & c)) 4202-001-02 4202-1 Assy. Galv Roller Housing Assy. (Consists of Items in Group (a & b)) 4202-001-05 4202-1 Assy. Chr Roller Housing Assy. (Consists of items in Group (a & b)) 4202-001-06 4202-1 9 Galv O Door Strike Plate 4042-011-01 4042-11 9 Chr O Door Strike Plate 4042-011-02 4042-11 10 Galv F Door Strike Plate 4042-024-01 4042-24 10 Chr F Door Strike Plate 4042-024-02 4042-24 11 b Galv Front Handle 4042-091-01 4042-91 11 b Chr Front Handle 4042-091-02 4042-91

ECN CS-2479 21 J9044052 Rev W


Continued

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 12 b Galv Front Handle Base 4042-092-01 4042-92 12 b Chr Front Handle Base 4042-092-02 4042-92 13 bc Galv Front or Back Handle Pin 4042-016-01 4042-16 13 bc Chr Front or Back Handle Pin 4042-078-01 4042-78 14 bc Front or Back Handle Spring 482-008 4042-15 + Front Handle (LH) 4042-107-01 4042-107 + Front Handle (RH) 4042-107-51 4042-107 15 Galv O Front Contact Block 4042-093-04 4042-93 15 Chr O Front Contact Block 4042-093-03 4042-93 16 Galv F Front Contact Block 4042-095-11 4042-95 16 Chr F Front Contact Block 4042-095-03 4042-95 17 c Galv Back Handle 4042-030-01 4042-30 17 c Chr Back Handle 4042-030-02 4042-30 18 c Galv Back Handle Base 4042-019-01 4042-19 18 c Chr Back Handle Base 4042-019-02 4042-19 + Back Handle Assy. (Consists of Items in Group (c)) LH 4042-018-01 4042-18 + Back Handle Assy. (Consists of Items in Group (c)) RH 4042-018-51 4042-18 19 Galv Back Contact Block (Double Seal Single Door) 4042-022-01 4042-22 19 Chr Back Contact Block (Double Seal Single Door) 4042-022-02 4042-22 20 Galv Back Contact Block (Single Seal Door) 4042-021-11 4042-21 20 Chr Back Contact Block (Single Seal Door) 4042-021-02 4042-21 21 Galv Back Contact Block (Double Door w/Astragal Board) 4042-026-11 4042-26 21 Chr Back Contact Block (Double Door w/Astragal Board) 4042-026-02 4042-26 22 Galv Back Contact Block (Double Door w/o Astragal Board) 4042-052-01 4042-52 22 Chr Back Contact Block (Double Door w/o Astragal Board) 4042-052-02 4042-52 23 Fiber Shim for Roller Housing (1/16”) 4202-017-01 4202-17 23 PP Shim for Roller Housing (1/16”) 4202-017-02 4202-17 24 Fiber O Shim for Front Contact Block (1/16”) 4042-111-01 4042-111 24 Fiber O Shim for Front Contact Block (1/8”) 4042-111-02 4042-111 24 PP O Shim for Front Contact Block (1/16”) 4042-111-03 4042-111 25 F Shim for Front Contact Block (1/16”) 4042-134 4042-134

Note: See instruction sheet for ordering parts. Also state whether the door has a single or double seal.

ECN CS-2479 22 J9044052 Rev W


12. E-Z OPEN TWO POINT SUPER FREEZER FASTENER #4092 F15

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv Complete Two Point Fastener Includes 4092-001-01 4092-1 2- Roller Housing Assy. with Strike 1 - Front Handle Assy. and Keeper Assy. 1 - Back Handle Assy. and Contact Block Assy. Chr Complete Two Point Fastener Includes: 4092-001-02 4092-1 2- Roller Housing Assy. with Strike 1 - Front Handle Assy. and Keeper Assy. 1 - Back Handle Assy. and Contact Block 1 Galv Front Handle Base 4092-004-01 4092-4 1 Chr Front Handle Base 4092-004-02 4092-42 2 Galv Front Handle 4092-005-01 4092-5 2 Chr Front Handle 4092-005-02 4092-5 3 Galv Lag Bolt (1/2”X5”) w/Washer (Lag) (Washer) 763-416 753-026 3 Chr Lag Bolt (1/2”X5”) w/Washer (Lag) (Washer) 763-430 753-158 4 a Galv Front Contact Block Base 4092-006-01 4092-6 4 a Chr Front Contact Block Base 4092-006-02 4092-6 5 a Pressure Toggle 4092-007-02 4092-7 6 Galv Toggle Pin (a) (3/8”X2-3/4”) 4092-009-01 4092-9 6 Chr Toggle Pin (a) (3/8”X2-3/4”) 4092-016-01 4092-16 Assy. Contact Block and Toggle Assy. (Consists of Items in Group (a)) 4092-003 4092-3

ECN CS-2479 23 J9044052 Rev W


Continued

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 7 b Galv Housing 4202-002-01 4202-2 7 b Chr Housing 4020-002-02 4202-2 8 b Galv Roller Link 4202-004-11 4202-4 8 b Chr Roller Link 4202-004-12 4202-4 9 b Roller 931-002 4202-16 10 b Galv Roller Pin 4202-006-01 4202-6 10 b Chr Roller Pin 4202-014-01 4202-14 Assy. Galv Roller Link with Roller and Roller Pin (Consists of Items 8,9 and 10) 4202-021-01 4202-21 Assy. Chr Roller Link with Roller and Roller Pin (Consists of Items 8,9 and 10) 4202-021-02 4202-21 11 b Roller Pin (3/8” X3-1/4”) 754-018 12 b Spring, (Brown) 482-021 4202-8 13 b Galv Spring Adjustment Bolt (1/4”X2”) w/Washer 751-406 4202-9 13 b Chr Spring Adjustment Bolt (1/4”X2”) w/Washer (Bolt) (Washer) Dwg. 4202-11 751-500 753-003 14 b Spring Adjustment Lug 4202-003-01 4202-3 Assy. Galv Roller Housing Assy. (Consists of Items in Group (b)) 4202-001-01 4202-1 Assy. Chr Roller Housing Assy. (Consists of Items in Group (b)) 4202-001-02 4202-1 15 Galv Door Strike Plate 4092-018-01 4092-18 15 Chr Door Strike Plate 4092-018-02 4092-18 16 PP Shim for Roller Housing (1/16”) 4202-017-02 4202-17 16 Fiber Shim for Roller Housing (1/16”) 4202-017-01 4202-17 17 c Galv Back Handle Base 4042-019-01 4042-19 17 c Chr Back Handle Base 4042-019-02 4042-19 18 c Galv Back Handle 4042-030-01 4042-30 18 c Chr Back Handle 4042-030-02 4042-30 19 c Galv Back Handle Pin 4042-016-01 4042-16 19 c Chr Back Handle Pin 4042-078-01 4042-78 20 Spring (c) for Back Handle 782-008 4042-15 Assy. Back Handle Assy. (LH) (Consists of Items in Group (c)) 4042-018-01 4042-18 Assy. Back Handle Assy. (RH) (Consists of Items in Group (c)) 4042-018-51 4042-18 21 Galv Contact Block 4042-022-01 4042-22 21 Chr Contact Block 4042-022-02 4042-22


ECN CS-2479 24 J9044052 Rev W


13. FIRE DOOR LATCH TWO POINT INTERCONNECTED FASTENER F16

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv Complete 2 Point Alltemp Door Latch 4383-027-01 4383-27 1 Keeper Housing 4073-003-01 4073-3 2 Plunger Clip 4070-012-01 4070-12 3 Plunger Spring 482-038 4070-11 4 Plunger 4073-009-01 4073-9 5 Keeper Base 4073-026-01 4073-26 6 Frame Locking Plate 4073-007-01 4073-7 7 Operating Crank with Pin 4074-006-01 4074-6 8 Bolt and Nut (for attaching Keeper Base to Housing) (Bolt) (Nut) 764-209 752-104 9 Plunger Pin (1/4”x1-3/4”) 755-003 10 Bearing for Operating Rod 4074-007-01 4074-7 11 Shim for Bearing (1/16”) 4074-017-01 4074-17 11 Shim for Bearing (1/8”) 4074-017-02 4074-17 11 Shim for Bearing (1/4”) 4373-021-01 4383-21 12 Operating Rod 4074-008-05 4074-8 13 Back Operating Handle with Pin 4383-026-01 4383-26 14 Back Handle Base Plate 4383-022-01 4383-22 15 Clevis Pin with Cotter Pin and (2) Washers (Clevis) (Cotter) (Washer) 754-209 754-301 753-151 16 Clevis Pin with Cotter Pin (Clevis) (Cotter) 754-211 754-304 17 Front Handle Base Plate 4383-024-01 4383-24 18 Front Operating Handle 4383-025-01 4383-25 19 Front Handle Spring with Screw and Washer (Spring) (Screw) 482-025 764-109 (Washer) (Spring) 753-100 4287-12 20 Adjustable Rod End with Felt Washer 4383-023-11 4383-23 21 Thru Rod Sub-Assy. (Includes Threaded Rod, Front Rod End and Pin) 4383-023-11 4383-23 Note: See instruction sheet for ordering parts. Also state the distance between the centerlilne and the keeper assy.

ECN CS-2479 25 J9044052 Rev W


14. THREE POINT INTERCONNECTED SMOKEHOUSE FASTENER #4175 F17

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete 3 Point Smokehouse Fastener (for Single Door) 4175-090 4175-90 Assy. Complete 3 Point Smokehouse Fastener (for Double Door) 4175-001 4175-1 1 Locking Dog (with Set Screw) (Long Handle) (Single Door) 4175-149-02 4175-149 1 Locking Dog (with Set Screw) (Short Handle) (Single Door) 4175-147-11 4175-147 1X Locking Dog (with Set Screw) (Long Handle) (Double Door) 4175-150-02 4175-150 1X Locking Dog (with Set Screw) (Short Handle) (Double Door) 4175-148-11 4175-148 2 Locking Dog Base 4175-002-01 4175-2 3 Side Keeper with Roller and Pin 4175-124-01 4175-124 4 Side Keeper Shim (Single) (1” Thick) 4175-024-01 4175-24 5 Side Keeper Shim (Single) (1/16” Thick) 4175-014-01 4175-14 5 Side Keeper Shim (Single) (1/8” Thick) 4175-014-02 4175-14 6 Thru Shaft Set Screw (1/2”X3/4” Dog Point) 767-301 7 Locking Set Screw (1/2”X1/4”) 767-901 8 Bottom Interconnecting Rod 4175-006-01 4175-6 9 Interconnecting Rod Pin (for Locking Dog) (3/8”X1-1/8”) 755-009 10 Galv Slide Bolt with Rivet 4085-002-01 4085-2 11 Galv Slide Bolt Guide 4175-009-01 4175-9 12 Top and Bottom Keeper 4175-011-01 4175-11 13 Top and Bottom Keeper Shim (1/16”) 4175-012-01 4175-12 13 Top and Bottom Keeper Shim (1/8”) 4175-012-02 4175-12 14 Top Interconnecting Rod (Up to 8’1”) 4175-013-01 4175-13 14 Top Interconnecting Rod (Up to 10’) 4175-081-01 4175-81 15 Thru Shaft Escutcheon 175-016-01 4175-16 16 Thru Shaft 4175-187-03 4175-187 17 Back Handle 4175-186-01 4175-186 18 Back Handle Pin (5/16”X1-1/8”) 755-006 19 Bottom Receptacle for Trucking Sill 4175-019-01 4175-19 20 Bottom Receptacle Shim (1/16”) 4175-101-01 4175-101

Note: See instruction sheet for ordering parts. Also state the HIC of the opening and if the door is a single or double.

ECN CS-2479 26 J9044052 Rev W


15. FOUR POINT INTERCONNECTED SMOKEHOUSE FASTENER 4175 F18

ECN CS-2479 27 J9044052 Rev W


Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete 4 Point Smokehouse Fastener (for Single, Wood Doors) 4175-063-01 4175-63 Assy. Complete 4 Point Smokehouse Fastener (for Single, Steel Doors) 4175-063-02 4175-63 Assy. Complete 4 Point Smokehouse Fastener (for Double, Wood Doors) 4175-031-01 4175-31 Assy. Complete 4 Point Smokehouse Fastener (for Double, Steel Doors) 4175-031-02 4175-31 1 Locking Dog (with Set Screw) (Long Handle) (Single Door) 4175-149-02 4175-149 1 Locking Dog (with Set Screw) (Short Handle) (Single Door) 4175-147-11 4175-147 1X Locking Dog (with Set Screw) (Long Handle) (Double Door) 4175-150-02 4175-150 1X Locking Dog (with Set Screw) (Short Handle) (Double Door) 4175-148-11 4175-148 2 Locking Dog Base (Main) 4175-002-01 4175-2 3 Side Keeper with Roller and Pin 4175-124-01 4175-124 4 Side Keeper Shim (Single 1” Thick) 4175-024-01 4175-24 5 Side Keeper Shim (Single/Double 1/16” Thick) 4175-014-01 4175-14 5 Side Keeper Shim (Single/Double 1/8” Thick) 4175-014-02 4175-14 6 Side Keeper Shim (Single 1-1/2” Thick) 4175-065-01 4175-65 7 Side Keeper Shim (Single 1/2” Thick) 4175-102-01 4175-102 8* Thru Shaft Set Screw (1/2”X3/4” Dog Point) 767-301 9 Locking Set Screw (1/2”X1/4”) 767-901 10 Bottom Interconnecting Rod 4175-006-01 4175-6 11 Interconnecting Rod Pin (for Locking Dog) (3/8”X1-1/8”) 755-009 12 Galv Slide Bolt with Rivet 4085-002-01 4085-2 13 Galv Slide Bolt Guide 4175-009-01 4175-9 14 Top Keeper 4175-011-01 4175-11 15 Top Keeper Shim (1/16”) 4175-012-01 4175-12 15 Top Keeper Shim (1/8”) 4175-012-02 4175-12 16 Bottom Receptacle 4175-019-01 4175-19 17 Bottom Receptacle Shim (1/16”) 4175-101-01 4175-101 18 Main to Intermediate Interconnecting Rod 4175-040-01 4175-40 19 Top Interconnecting Rod 4175-039-01 4175-39 20 Clevis Pin (3/8” X 29/32”) with Cotter Pin (3/32” X 3/4”) (Clevis) (Cotter) (Washer) and Flat Washer 13/16 X 13/32”X16 GA 754-206 754-303 753-007 21 Thru Shaft Escutcheon 4175-016-01 4175-16 22 Thru Shaft (Wood Door) 4175-045-04 4175-45 22 Thru Shaft (Steel Door) 4175-010 4175-10 23 Back Handle 4175-186-01 4175-186 24 Back Handle Pin (5/16”X1-1/8”) 755-006 25* Intermediate Base 4175-061-01 4175-61 26* Intermediate Locking Dog 4175-062-01 4175-62 27* Intermediate Base Stud 4250-002-01 4250-2 *These must be ordered as an Assy. when replacing either #4175-33 top base or #4175-34 locking dog (made before 1963) Note: See instruction sheet for ordering parts. Also state the HIC of the opening, if the door is single or double, the

distance between intermediate contact point centers, and if the door is steel or wood.

ECN CS-2479 28 J9044052 Rev W


16. FIVE POINT INTERCONNECTED SMOKEHOUSE FASTENER #4175 F19

ECN CS-2479 29 J9044052 Rev W


Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete 5 Point Smokehouse Fastener (for Single Wood Door) 4175-132-01 4175-132 Assy. Complete 5 Point Smokehouse Fastener (for Single Steel Door) 4175-132-02 4175-132 Assy. Complete 5 Point Smokehouse Fastener (for Double Wood Door) 4175-151-01 4175-151 Assy. Complete 5 Point Smokehouse Fastener (for Double Steel Door) 4175-151-02 4175-151 1 Locking Dog (with Set Screw) (Long Handle) (Single Door) 4175-149-02 4175-149 1 Locking Dog (with Set Screw) (Short Handle) (Single Door) 4175-147-11 4175-147 1X Locking Dog (with Set Screw) (Long Handle) (Double Door) 4175-150-02 4175-150 1X Locking Dog (with Set Screw) (Short Handle) (Double Door) 4175-148-11 4175-148 2 Locking Dog Base (Main) 4175-002-01 4175-2 3* Side Keeper with Roller and Pin 4175-124-01 4175-124 4 Side Keeper Shim (Single) (1" Thick) 4175-024-01 4175-24 5 Side Keeper Shim (Single/Double) (1/16" Thick) 4175-014-01 4175-14 5 Side Keeper Shim (Single/Double) (1/8" Thick) 4175-014-02 4175-14 6 Side Keeper Shim (Single) (1-1/2" Thick) 4175-065-01 4175-65 7 Side Keeper Shim (Single) (1/2" Thick) 4175-102-01 4175-102 8* Thru Shaft Set Screw (1/2"x3/4" Dog Point) 767-301 9 Locking Set Screw (1/2"x1/4") 767-901 10 Bottom Interconnecting Rod 4175-006-01 4175-6 11 Interconnecting Rod Pin (for Locking Dog) (3/8"x1-1/8") 755-009 12 Galv Slide Bolt with Rivet 4085-002-01 4085-2 13 Galv Slide Bolt Guide 4175-009-01 4175-9 14 Top Keeper 4175-011-01 4175-11 15 Top Keeper Shim (1/16") 4175-012-01 4175-12 15 Top Keeper Shim (1/8") 4175-012-02 4175-12 16 Bottom Receptacle 4175-019-01 4175-19 17 Bottom Receptacle Shim (1/16") 4175-101-01 4175-101 18 Main to Intermediate Interconnecting Rod 4175-133 4175-133 19 First Intermediate to Second Intermediate Interconnecting Rod 4175-129 4175-129 20 Top Interconnecting Rod 4175-134 4175-134 21 Clevis Pin (3/8"x29/32") w/Cotter Pin (3/32"x3/4") (Clevis) (Cotter) (Washer) and Flat Washer (13/16"x13/32"x16GA.) 754-206 754-303 753-007 22 Thru Shaft Escutcheon 4175-016-01 4175-16 23 Thru Shaft (Wood Door) 4175-045 4175-45 23 Thru Shaft (Steel Door) 4175-010 4175-10 24 Back Handle 4175-186-01 4175-186 25 Back Handle Pin (5/16"x1-1/8") 755-006 26* Intermediate Base 4175-061-01 4175-61 27* Intermediate Locking Dog 4175-002-01 4175-2 Note: See instruction sheet for ordering parts. Also state the HIC of the opening, if the door is single or double, the

distance between intermediate contact point centers, and if the door is steel or wood.

ECN CS-2479 30 J9044052 Rev W


17. HEAVY DUTY CANE BOLT SINGLE POINT F20

ECN CS-2479 31 J9044052 Rev W


Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete Cane Bolt (Consists of Items in Group (a)) 4016-001-01 4016-1 1 ab Galv Guide 4175-009-01 4175-9 1 ab Chr Guide 4175-009-02 4175-9 2 a Galv Cane Bolt with Handle (7/8” x 18”) 4016-003-01 4016-3 2 a Chr Cane Bolt with Handle (7/8” x 18”) 4016-003-02 4016-3 3 a Galv Stop Screw (3/8”x #14) 765-312 3 a Chr Stop Screw (1/2” x #14) 765-321 4 a Galv Handle Hooks 4016-004-01 4016-4 4 a Chr Handle Hooks 4016-004-02 4016-4 5 ab Receptacle Keeper (for Concrete Floor) 4016-008-01 4016-8 6 ab Galv Keeper 4085-011-01 4085-11 6 ab Chr Keeper 4085-011-02 4085-11 Assy. Complete Interconnected Cane Bolt (for Doors up to 7’0” High) (Consists of Items in Group (b)) 4085-001 4085-1 Assy. Complete Interconnected Cane Bolt (for Doors up to 12”0” High) (Consists of Items in Group (b)) 4085-001 4085-1 7 b Galv Bolt (7/8” x 10-1/2”Long) 4085-002-01 4085-2 7 b Chr Bolt (7/8” x 10-1/2”Long) 4085-002-02 4085-2 8 b Galv Rivet (3/8” x 1-1/8”) 755-009 8 b Chr Rivet (3/8” x 1-1/8”) 755-205 9 b Galv Rivet (5/16” x 1-1/8”) 755-006 9 b Chr Rivet (5/16” x 1-1/8”) 755-202 10 b Galv Base Plate 4085-003-01 4085-3 10 b Chr Base Plate 4085-003-02 4085-3 11 b Galv Handle and Cam Sub-Assy. 4085-014-01 4085-14 11 b Chr Handle and Cam Sub-Assy. 4085-014-02 4085-14 12 b Galv Lag Screw and Washer (Screw) (Washer) 763-416 753-018 12 b Chr Lag Screw and Washer (Screw) (Washer) 763-430 753-156 13 b Galv Rod Guide 312-006 4085-47 13 b SST Rod Guide 313-525 4085-47 14 b Galv Rod Guide Base 4085-046-01 4085-46 14 b SST Rod Guide Base Special Order 4085-46 15 b Galv Bottom Interconnecting Bar (32” Hole Centers) 4085-008-01 4085-8 15 b Chr Bottom Interconnecting Bar (32” Hold Centers) 4085-008-02 4085-8 16 b Galv Top Interconnecting Bar (for Doors up to 7’0” High) 4085-009-01 4085-9 16 b Chr Top Interconnecting Bar (for Doors up to 7’0” High) 4085-009 4085-9 16 b Galv Top Interconnecting Bar (for doors up to 12’0” High) 4085-009 4085-9 16 b Chr Top Interconnecting Bar (for doors up to 12’0” High) 4085-009 4085-9 17 Galv Keeper (for Front Mounting only) (Not Shown) 4175-011-01 4175-11 Note: See instruction sheet for ordering parts. Also state the HIC of the opening, if the door is single or double, and

the type of sill.

ECN CS-2479 32 J9044052 Rev W


18. K-56 SAFETY RELEASE FASTENER F22

ECN CS-2479 33 J9044052 Rev W


Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. F Complete Fastener (Tuffkote) (for 4” Freezer) 4188-084-01 4188-84 Assy. O Complete Fastener (Tuffkote) (for 4” Freezer) 4188-084-03 4188-84 Assy. Chr F Complete Fastener (for 4” Freezer) 4188-084-02 4188-84 Assy. Chr O Complete Fastener (for 4” Freezer) 4188-084-04 4188-84 Assy. F Complete Fastener (Tuffkote) (for 4” Cooler) 4188-084-05 4188-84 Assy. O Complete Fastener (Tuffkote) (for 4” Cooler) 4188-084-07 4188-84 Assy. Chr F Complete Fastener (for 4” Cooler) 4188-084-06 4188-84 Assy. Chr O Complete Fastener (for 4” Cooler) 4188-084-08 4188-84 Assy. 1-1/8” Complete Fastener (for 6” Freezer) (Tuffkote) 4188-084-09 4188-84 Assy. Chr 1-1/8” Complete Fastener (for 6” Freezer) 4188-084-10 4188-84 1 Latch Body Assy. (Tuffkote) Pad Locking w/Light Spring 441-307 1 Chr Latch Body Assy. w/o Locking Cylinder w/Light Spring 441-308 1 Chr Latch Body Assy. w/ Locking Cylinder w/Light Spring 441-313 2 F Latch Strike (Tuffkote) 441-305 2 Chr F Latch Strike 441-303 3 O Latch Strike (Tuffkote) 441-306 3 Chr O Latch Strike 441-304 4 Galv Latch Bottom Plate 441-311 5 Galv Thru Rod with Knob, Felt Washer and Escutcheon (for 4” Cooler Door) STD 4188-036-03 4188-36 5 Galv Thru Rod with Knob, Felt Washer and BOB 4188-036-07 4188-36 Escutcheon (for 6” Cooler Door) STD 4188-036-05 4188-36 5 Chr Thru Rod with Knob, Felt Washer and BOB 4188-036-09 4188-36 Escutcheon (for 4” Cooler Door) STD 4188-036-04 4188-36 5 Chr Thru Rod with Knob, Felt Washer and BOB 4188-036-08 4188-36 Escutcheon (for 6” Cooler Door) STD 4188-036-06 4188-36 6 Galv Thru Rod with Knob, Felt Washer and BOB 4188-036-10 4188-36 Escutcheon (for 4” Freezer Door) STD 4188-026-03 4188-26 6 Galv Thru Rod with Knob, Felt Washer and BOB 4188-026-07 4188-26 Escutcheon (for 6” Freezer Door) STD 4188-026-05 4188-26 6 Chr Thru Rod with Knob, Felt Washer and BOB 4188-026-09 4188-26 Escutcheon (for 4” Freezer Door) STD 4188-026-04 4188-26 6 Chr Thru Rod with Knob, Felt Washer and BOB 4188-026-08 4188-26 Escutcheon (for 6” Freezer Door) STD 4188-026-06 4188-26 BOB 4188-026-10 4188-26 7 Handle Spring Light (Not Shown) 441-106 8 Fiber Strike Shim (1/16”) (Not Shown) 4188-107-01 4188-107 8 SST Strike Shim (1/16”) (Not Shown) 4188-107-02 4188-107 8 PP Strike Shim (1/16”) (Not Shown) 4188-107-03 4188-107 8 SST Strike Shim (1/4”) (Not Shown) 4188-105-02 4188-105 BOB = BUMP OPEN BAR

18. K-556 SAFETY RELEASE FASTENER (TABLE CORRELATES TO K56 DRAWING)

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 SST Latch Body Assy. Padlocking w/Light Spring 441-331 3 SST O Latch Strike 441-332 * Other parts are the same as K56.

18. K-778 SAFETY RELEASE FASTENER (TABLE CORRELATES TO K56 DRAWING)

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 SST Latch Body Assy. Padlocking w/Light Spring 441-345 2 SST F Latch Strike 441-346 3 SST O Latch Strike 441-347 * Other parts are the same as K56.


ECN CS-2479 34 J9044052 Rev W


19. K-55 SAFETY RELEASE FASTENER F23

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. F Complete Fastener (Tuffkote) (for 4” Door) 4191-001-01 4191-1 Assy. Chr F Complete Fastener (for 4” Door) 4191-001-02 4191-1 Assy. 1-1/8” Complete Fastener (Tuffkote) (for 4” Door) 4191-001-03 4191-1 Assy. Chr 1-1/8” Complete Fastener (for 4” Door) 4191-001-04 4191-1 Assy. F Complete Fastener (Tuffkote) (for 6” Door) 4191-001-05 4191-1 Assy. Chr F Complete Fastener (for 6” Door) 4191-001-06 4191-1 Assy. 1-1/8” Complete Fastener (Tuffkote) (for 6” Door) 4191-001-07 4191-1 Assy. Chr 1-1/8” Complete Fastener (for 6” Door) 4191-001-08 4191-1 1 Latch Body Assy. (with Regular Spring) (Tuffkote) 441-256 1 Chr Latch Body Assy. (with Regular Spring) 441-254 1 Chr Latch Body Assy. (with Light Spring) (for use on Door w/Top Mounted Door Closer Only) 441-255 2 Galv Latch Tongue Assy. 441-253 3 Galv F Latch Strike 4188-016-01 4188-16 3 Chr F Latch Strike 4188-016-02 4188-16 4 O Shim for Flush (1/32”) 4188-017-03 4188-17 5 O Latch Strike (Tuffkote) 441-258 5 Chr O Latch Strike (Offset Type) (Consists of all Items in Group (a)) 441-257 5 a Latch Strike Housing (Sold as Part of Ref. #5 Assy. Only) 6 a Latch Strike Insert (Tuffkote) 441-275 6 a Chr Latch Strike Insert 441-276 7 a Strike Adjusting Screw 441-277 8 Strike Set Screw 441-271 9 Strike Lock Washer 441-272 10 Latch Roller 441-261 11 Latch Roller Pin 441-262 12 Latch Spring (Regular) 441-274 13 Galv Inside Release Handle 441-259 13 Chr Inside Release Handle 441-260 14 Thru Rod Ferrule 441-263 15 Felt Washer 441-268 16 Plastic Thru Rod (6-7/16") 4188-020-11 4188-20 16 Plastic Thru Rod (6-1/4") 4188-020-21 4188-20 16 Plastic Thru Rod (8-7/16") 4188-020-12 4188-20 16 Plastic Thru Rod (8-1/4") 4188-020-22 4188-20 17 Fiber Keeper Shim (1/16”) (Not Shown) 4191-012-01 4191-12 17 SST Keeper Shim (1/16”) (Not Shown) 4191-012-02 4191-12 17 PP Keeper Shim (1/16”) (Not Shown) 4191-012-03 4191-12

ECN CS-2479 35 J9044052 Rev W


20. DENT LATCHES 1. D-60 LATCH

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete Fastener (w/Cyl Lock) (Polished Aluminum) 441-314 1 Strike (1-1/4” Offset) 441-315 2 Back Release (for 4” Plyfoam Doors w/o Kickplates) 441-316 2 Back Release (for 4” Plyfoam Doors w/Kickplates or Jamolite Doors w/o Kickplates) 441-323 2 Back Release (for 4” Plyfoam Doors w/Field Added Plates and Jamolite Doors w/Kickplates) 441-324 2 Back Release (for 4” Plyfoam Doors w/Both Plates and Jamolite Doors w/Field Added Plates) 441-325 2 Back Release (for 6” Plyfoam Doors w/o Kickplates and 4” Jamolite Doors w/Both Plates) 441-326 2 Back Release (for 6” Plyfoam Doors w/Kickplates and Jamolite Doors w/o Plates) 441-327 2 Back Release (for 6” Plyfoam Doors w/Field Added Plates and Jamolite Doors w/Kickplates) 441-328 2 Back Release (for 6” Plyfoam Doors w/Both Plates and Jamolite Doors w/Field Added Plates) 441-329 2 Back Release (for 6” Jamolite Doors w/Both Field Added Plates and Kickplates) 441-330 3 Fastener (w/Cyl Lock) 441-317 4 SST Escutcheon (1/8”) (Not Shown) 4306-009-01 4306-9 5 Fiber Keeper Shim (1/16”) (Not Shown) 4306-021-01 4306-21 5 PP Keeper Shim (1/16”) (Not Shown) 4306-021-02 4306-21


ECN CS-2479 36 J9044052 Rev W


2. D-600 LATCH

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Alum Latch Body Assy. w/Locking Cylinder 441-341 1. SST Latch Body Assy. w/Locking Cylinder 441-342 2 Alum O Latch Strike 441-343 2 SST O Latch Strike 441-344 3 Galv Thru Rod with Knob, Felt Washer and Escutcheon (for 4” Cooler Door) 4306-050-01 4306-50 3 SST Thru Rod with Knob, Felt Washer and Escutcheon (for 4” Cooler Door) 4306-050-02 4306-50 4 Galv Thru Rod with Knob, Felt Washer and Escutcheon (for 4” Freezer Door) 4306-051-01 4306-51 4 SST Thru Rod with Knob, Felt Washer and Escutcheon (for 4” Freezer Door) 4306-051-02 4306-51 3 Galv Thru Rod with Knob, Felt Washer, Escutcheon and Spring (for 4” Cooler Door/D-70 Bump Bar) 4306-050-03 4306-50 3 SST Thru Rod with Knob, Felt Washer, Escutcheon and Spring (for 4” Cooler Door/D-70 Bump Bar) 4306-050-04 4306-50 4 Galv/SST Thru Rod w/SST Knob, Felt Washer, Galv Escutcheon and Spring (for 4” Freezer Door/D-70 Bump Bar) 4306-051-03 4306-51 4 SST Thru Rod with Knob, Felt Washer, Escutcheon and Spring (for 4” Freezer Door/D-70 Bump Bar) 4306-051-04 4306-51 5 Fiber Strike Shim (1/16”) 4306-046-01 4306-46 5 PP Strike Shim (1/16”) 4306-046-02 4306-46 6 Galv Thru Rod Knob (for 4” Freezer Doors) 4369-469-01 4369-469 6 SST Thru Rod Knob (for 4” Freezer Doors) 4369-469-02 4369-469 7 SST Roll Pin, 3/16” Dia. x 3/4" Lg. 754-051

1 2

3

5

4 6

7

ECN CS-2479 37 J9044052 Rev W


21. GSH LA-SS LATCH

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Latch 449-006 2 Strike 449003 3 Escutcheon 4188-046-02 4188-46 4 Thru Rod (4” Door) 449-004 5 Thru Rod (6” Door) 449-005 6 SST Shim (16 GA) 4188-142-01 4188-142 7 SST Shim (10 GA) 4188-142-02 4188-142 7 PP Shim (1/16”) 4188-142-03 4188-142 8 SST Oval Head Machine Screw (1/4-20 x 1-1/4”) 764-507 9 SST Oval Head Machine Screw (1/4-20 x 1-3/4”) 764-510 10 Tee Nut, Pronged (1/4-20 x 9/16”) 752-405


ECN CS-2479 38 J9044052 Rev W


22. W99 LATCH

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 SST O Latch and Keeper 441-321 2 Inside Release Latch (Not Shown) 441-322


ECN CS-2479 39 J9044052 Rev W


GASKETS

23. GASKETS, RETAINERS G1

ECN CS-2479 40 J9044052 Rev W


Ref # Group Finish Offset Name of Part Stock No. Drawing No. 2 No Equal Gasket and Tacks (1/2”) Rubber Core 519-006 4050-3 3 Jamison Hollow Sponge Core Gasket (Rubberized Fabric Covering 3/4” Bulb) 6’10” Long 512-019 4050-41 7’4” Long 512-020 4050-41 8’4” Long 512-018 4050-41 10’3” Long 512-016 4050-41 15’6” Long 512-009 4050-41 4 Lo-Temp Gasket (7/16”X1-1/4”) 512-004 4050-21 5 Smokehouse Gasket (3/4”X1-1/4”) 512-011 4050-34 6 Super Freezer Gasket (5/8” X 2”) 512-044 4050-44 6 Neoprene Closed Cell Rubatex (5/8”X 1-1/4”) 512-026 7 Super Freezer Gasket (5/8” X 4”) 512-008 4050-8 9 Jamison “L” Gasket (1/16”X3/4”X1-5/8”) (10’ Lengths Only) 511-002 4050-7 10 Jamison Sillseal Gasket (1/16 X 1-5/8”) 552-108 4050-4 10 Jamison Hypalon Coated Nylon (1/16”X2”) 552-150 4050-49 10 Jamison Hypalon Coated Nylon (1/16”X3”) 552-150 4050-49 10 Jamison Hypalon Coated Nylon (1/16”X5”) 552-154 4050-50 10 Jamison Hypalon Coated Nylon (1/16”X6”) 552-117 4050-73 10 Jamison Hypalon Coated Nylon (1/32”X2-1/2”) 552-152 4050-92 10 Jamison Hypalon Coated Nylon (1/32”X4”) 552-153 4050-81 10 Jamison Hypalon Coated Nylon (1/32”X5-1/2”) 552-155 4050-58 10&11 Jamison Hypalon Coated Nylon (1/16”X6-1/2”) 552-157 4050-60 12 Jamison Hypalon Coated Nylon (1/16”X7”) 552-157 4050-60 12 Jamison Hi-Nitrile Neoprene (1/16X7-1/2”) 552-117 4050-59 14 Jamison Hypalon Coated Nylon (1/32”X2-3/8”) 552-151 4050-47 15 Canvas Backed Neoprene Gasket (3/32”X2-1/4”) 552-300 4050-91 16 Jamoclear Gasket (1/4”x3/4”X1-1/16”) (Available in 10’ Lengths Only) 4315-051-01 4315-51


ECN CS-2479 41 J9044052 Rev W


24. GASKETS AND RETAINERS G2

ECN CS-2479 42 J9044052 Rev W


Ref # Group Finish Offset Name of Part Stock No. Drawing No. 17 Jamison Hollow Lo-Temp Gasket (for Jamolite II) 512004 17 Jamison Hollow Lo-Temp Gasket, EPDM (with Adhesive Backing and Corner Inserts) 512-006 4050-65 17 Jamison Hollow Lo-Temp Gasket, Neoprene (with Adhesive Backing and Corner Inserts) 512-046 4050-104 18 Jamison Extruded Sponge Gasket (for Automatic Sill 7/8”X2”) 512-025 4050-70 19 Jamison Vinyl Magnetic Gasket for 3’ X 7’ Flush Sill Doors (Shipped as Assy. for Complete Door) 4407-315-01 4407-315 19 Jamison Vinyl Magnetic Gasket for 3’ X 7’ High Sill Doors (Shipped as Assy. for Complete Door) 4407-315-02 4407-315 19 Jamison Vinyl Magnetic Gasket (Shipped as Assy.

for Complete Door)(Door Size Required) 4407-315-03 4407-315 20 Jamison Hi-Nitrile Baffle Gasket (with Galv Cover) (For Temperatures above 30° F) 4050-086-01 4050-86 20 Jamison Hi-Nitrile Baffle Gasket (with Stainless Steel Cover) (For Temperatures above 30° F) 4050-086-02 4050-86 20 Jamison Silicone Baffle Gasket (with Galv Cover) (For Temperatures 30 º F or Below) 4050-086-03 4050-86 20 Jamison Silicone Baffle Gasket (with Stainless Steel Cover) (For Temperatures 30 º F or Below) 4050-086-04 4050-86 21 Gasket Retainer (For use with #3,8 and19) (4’ Long for Galv Finish) 4290-690-01 21 Gasket Retainer (For use with #3,8 and19) (8’ Long for Stainless Steel Finish) NOT AVAILABLE 22 Gasket Retainer with screws (for Wood Frame) (Retainer) (Screw) (for Use with #9) (8’ Long) ------------- 765-312 23 Gasket Retainer with Screws (for Steel Frame) (Retainer) (Screw) (for Use with #9) (Galv) ------------- 765-312 23 Gasket Retainer with Screws (for Steel Frame) (Retainer) (Screw) (for Use with #9) (Stainless Steel) ------------- 765-312 24 Gasket Retainer with Screws (8’ Long) (Retainer) (Screw) (for Use on Jamoclear) (Stainless Steel) 4315-069-01 765-351 Dwg. No. 4215-69 25 Gasket Retainer with Screws (7’1” Long) (Retainer) (Screw) (for Astragal of Mailing Vestibule Door (Galv)) 4194-029-01 765351 Dwg. No. 4194-29 26 Gasket Retainer with Screws (4-3/4” Long) (Retainer) (Screw) (for Cam Seal on Mailing Vestibule Door (Galv)) 4194-071-01 766-104 Dwg. No. 4194-71 27 Gasket Retainer with Screws (18” Long) (for (Retainer) (Screw) Jamb Guard Seal on Mailing Vestibule Door (Galv) 4194-072-01 766-104 Dwg. No. 4194-72 28 Gasket Retainer with Screws (for Sides (Retainer) (Screw) Head of Mailing Vestibule Door (Galv) 4194-026 766-312 Dwg. No. 4194-26


ECN CS-2479 43 J9044052 Rev W


HINGES

25. JB ADJUSTOFLEX HINGE H3

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv 1-1/4” Complete Hinge (LH) 4026-001-01 4026-1 Assy. Chr 1-1/4” Complete Hinge (LH) 4026-001-02 4026-1 Assy. Galv 1-1/4” Complete Hinge (RH) 4026-001-51 4026-1 Assy. Chr 1-1/4” Complete Hinge (RH) 4026-001-52 4026-1 Assy. Galv 1-3/8” Complete Hinge 4026-001 4026-1 Assy. Galv 1-5/8” Complete Hinge 4026-001 4026-1 1 Galv Hinge Blade (24” Overall) 4026-002-01 4026-2 1 Chr Hinge Blade (24” Overall) 256-001 2 Galv Hinge Link 4026-003-01 4026-3 2 Chr Hinge Link 4026-003-02 4026-3 3 Hinge Spring 482-005 4026-9 4 Galv Link Pin (3/8” x 3”) 4026-004-01 4026-4 4 Chr Link Pin (3/8” x 3”) 4026-013-01 4026-13 5 Galv 1-1/4” Hinge Butt 4026-005-01 4026-5 5 Galv 1-3/8” Hinge Butt 4026-007-01 4026-7 5 Galv 1-5/8” Hinge Butt 4026-008-01 4026-8 5 Chr 1-1/4” Hinge Butt 4026-005-02 4026-5 6 Galv Hinge Pin 4026-006-01 4026-6 6 Chr Hinge Pin (1/2” x 4-3/4”) 4026-012-01 4026-12 7 Galv Adjustment Bolt and Nut (3/8” x 1-3/4”) with (Bolt) (Nut) (Washer) (11/16” x 13/32” x #16 Ga.) Flat Washer 751-423 752-303 753-045 7 Chr Adjustment Bolt and Nut (3/8” x 1-3/4”) with (Bolt) (Nut) (Washer) (11/16” x 13/32” x #16 Ga.) Flat Washer 751-508 752-303 753-165 8 Galv Thrust Ball Bearing 481-052 8 Chr Thrust Ball Bearing 481-053 9 Galv Thrust Washer (1-1/4” x 33/64” x #13 GA) 753-017 9 Chr Thrust Washer (1-1/4” x 33/64” x #13 GA) 753-155 10 PP Shim for Hinge Butt (1/16”) 4026-015-02 4026-15 10 Fiber Shim for Hinge Butt (1/16”) 4026-015-01 4026-15


ECN CS-2479 44 J9044052 Rev W


26. JB SELF-RAISING ADJUSTOFLEX HINGE H4

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv Complete Hinge (LH) 4233-006-01 4233-6 Assy. Chr Complete Hinge (LH) 4233-006-02 4233-6 Assy. Galv 1-1/4” Complete Hinge (RH) 4233-006-51 4233-6 Assy. Chr 1-1/4” Complete Hinge (RH) 4233-006-52 4233-6 1 Galv Hinge Blade 4026-002-01 4026-2 1 Chr Hinge Blade 256-001 4026-2 2 Galv Hinge Butt (LH) 4233-002-01 4233-2 2 Galv Hinge Butt (RH) 4233-002-51 4233-2 2 Chr Hinge Butt (LH) 4233-002-02 4233-2 2 Chr Hinge Butt (RH) 4233-002-52 4233-2 3 Galv Hinge Link (LH) 4233-001-01 4233-1 3 Galv Hinge Link (RH) 4233-001-51 4233-1 3 Chr Hinge Link (LH) 4233-001-02 4233-1 3 Chr Hinge Link (RH) 4233-001-52 4233-1 4 Galv Hinge Pin (5/8” x 6-1/2”) 4233-003-01 4233-3 4 Chr Hinge Pin (5/8” x 6-1/2”) 4233-004-01 4233-4 5 Galv Link Pin (3/8” x 3”) 4026-004-01 4026-4 5 Chr Link Pin (3/8” x 3”) 4026-013-01 4026-13 6 Cotter Pin (1/8” x 1-1/4”) 754-307 7 Hinge Spring 482-005 4026-9 8 Galv Adjustment Bolt and Nut (Bolt) (Nut) 751-424 752-303 8 Chr Adjustment Bolt and Nut (Bolt) (Nut) 751-508 752-303 9 Fiber Shim for Hinge Butt (1/8”) 4233-005-01 4233-5 9 Fiber Shim for Hinge Butt (1/16”) 4233-005-02 4233-5 9 PP Shim for Hinge Butt (1/16”) 4233-005-03 4233-5


ECN CS-2479 45 J9044052 Rev W


27. JA ADJUSTOFLEX HINGE H1

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1* Galv Hinge Blade xxxx-xxx-xx xxxx-x 2 Galv Hinge Link 4025-003-01 4025-3 3 Galv Hinge Spring 482-004 4025-4 4 Galv Link Pin (1/2” x 4”) 4025-005-01 4025-5 5 Galv Hinge Butt (1-1/4” Offset) 4025-006-01 4025-6 5 Galv Hinge Butt (1-3/8” Offset) 4025-009-01 4025-9 5 Galv Hinge Butt (1-5/8” Offset) 4025-008-01 4025-8 6 Galv Hinge Pin (5/8” x 6-1/2”) 4025-007-01 4025-7 7 Galv Adjustment Bolt and Nut (3/8” x 2”) (Bolt) (Nut) 751-424 752-303 8 Galv Thrust Ball Bearing 481-054 9 Galv Thrust Washer (1 3/8” x 41/64” x #13 GA) 753-020 10 Galv Shim for Hinge Butt (1/8”) 4025-018-02 4025-18 10 Galv Shim for Hinge Butt (1/16”) 4025-018-01 4025-18 * No longer available please see part list H2 for Replacement.


ECN CS-2479 46 J9044052 Rev W


28. JS RIGID HINGE H2 Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy.* 7/8” Complete Hinge (Standard) 4025-024-01 4025-24 Assy.**1 7/8” Hinge Blade with Grease Fitting 4025-022-01 4025-22 2 Hinge Butt 4025-006-01 4025-6 3 Hinge Pin (5/8” x 6-1/2”) 4025-007-01 4025-7 4 Thrust Ball Bearing 481-054 5 Thrust Washer (1 3/8” x 41/64” x #13 GA) 753-020 6 Shim for Hinge Butt (1/8”) 4025-018-02 4025-18 6 Shim for Hinge Butt (1/16”) 4025-018-01 4025-18

*7/8” Offset Standard (Flush to 2” Offset Available Upon Request) **When replacing a JA hinge blade with a JS blade, the offset and hinge pin location must be given.


ECN CS-2479 47 J9044052 Rev W


29. JC ADJUSTOFLEX HINGE H5 Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. 1-1/4” Complete Hinge 4027-001 4027-1 Assy. 1-3/8” Complete Hinge 4027-001 4027-1 1 Galv Hinge Blade (17” Overall) 4027-002-01 4027-2 1 Chr Hinge Blade (17” Overall) 256-002 2 Galv Hinge Link 4027-003-01 4027-3 2 Chr Hinge Link 4027-003-02 4027-3 3 Hinge Spring 482-006 4027-4 4 Galv Link Pin (5/16” x 2-1/4”) 4027-006-01 4027-6 4 Chr Link Pin (5/16” x 2-1/4”) 4027-011-01 4027-11 5 Galv 1-1/4” Hinge Butt 4027-007-01 4027-7 5 Chr 1-1/4” Hinge Butt 4027-007-02 4027-7 5 Galv 1-3/8” Hinge Butt 4027-026-01 4027-26 6 Galv Hinge Pin (3/8” x 3-3/4”) 4027-008-01 4027-8 6 Chr Hinge Pin (3/8” x 3-1/2”) 4027-010-01 4027-10 7 Galv Adjustment Bolt and Nut (3/8” x 1-3/4”) with (Bolt) (Nut) (Washer) (11/16” x 13/32” x #16 GA) Flat Washer 751-424 752-303 753-045 7 Chr Adjustment Bolt and Nut (3/8” x 1-3/4”) with (Bolt) (Nut) (Washer) (11/16” x 13/32” x #16 GA) Flat Washer 751-509 752-303 753-165 8 Galv Thrust Ball Bearing 481-050 8 Chr Thrust Ball Bearing 481-051 9 Galv Thrust Washer (1 1/8” x 25/64” x #16 GA) 753-013 10 PP Shims for Hinge Butt (1/16”) 4027-022-02 4027-22 10 Fiber Shims for Hinge Butt (1/16”) 4027-022-01 4027-22


ECN CS-2479 48 J9044052 Rev W


30. JR RIGID HINGE H6

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv 1-1/4 Complete Hinge (LH) 4053-001-01 4053-1 Assy. Galv 1-1/4 Complete Hinge (RH) 4053-001-51 4053-1 Assy. Chr 1-1/4 Complete Hinge (LH) 4053-006-01 4053-6 Assy. Chr 1-1/4 Complete Hinge (RH) 4053-006-51 4053-6 Assy. 1-1/4 Complete Hinge (LH) (Polished Bronze) 4053-006-03 4053-6 Assy. 1-1/4 Complete Hinge (RH) (Polished Bronze) 4053-006-53 4053-6 1 Galv Hinge Bar (12” Overall) 4053-002-01 4053-2 1 Chr Hinge Bar (12” Overall) 4053-007-01 4053-7 2 Galv Hinge Pin (3/8” x 3-3/4”) 4027-008-01 4027-8 2 SST Hinge Pin (3/8” x 3-3/4”) 4027-010-01 4027-10 3 Galv Thrust Ball Bearing 481-050 3 Chr Thrust Ball Bearing 481-051 4 Galv 1-1/4 Hinge Butt 4053-004-01 4053-4 4 Chr 1-1/4 Hinge Butt 4053-005-01 4053-5 5 Galv Thrust Washer (1” x 25/64” x #17 GA) 753-008 6 PP Fiber Shim for Hinge Butt (1/16”) 4053-009-02 4053-9 6 Fiber Fiber Shim for Hinge Butt (1/16”) 4053-009-01 4053-9


ECN CS-2479 49 J9044052 Rev W


31. JF RIGID HINGE (FIRE DOOR) H7

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv 1-3/4” Complete Hinge 4026-025 4026-25 1 Hinge Blade 4026-024-01 4026-24 2 Hinge Butt 4026-005-01 4026-5 3 Hinge Pin 4026-006-01 4026-6 4 Thrust Ball Bearing 481-052 5 Thrust Washer (1-1/4” x 33/64” x #13 GA) 753-017 6 Grease Fitting (1/4-28NF) 489-026 7 Steel Shim for Hinge Butt (1/16”) 4026-026-01 4026-26


ECN CS-2479 50 J9044052 Rev W


32. SMOKEHOUSE HINGE H8 #4175

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. 7/8” Complete Hinge (10”) 4175-022-01 4175-22 Assy. 7/8” Complete Hinge (15”) 4175-022-03 4175-22 Assy. 7/8” Complete Hinge (20”) 4175-022-05 4175-22 1 Hinge Butt 4175-020-01 4175-20 2 Hinge Bar (10”) 4175-021-05 4175-21 2 Hinge Bar (15”) 4175-021-10 4175-21 2 Hinge Bar (20”) 4175-021-20 4175-21 3 Hinge Pin (1/2” x 3-1/2”) 4175-074-01 4175-74 4 Thrust Ball Bearing 481-052 5 PP Shim for Hinge Butt (1/16”) (Not Shown) 4175-077-02 4175-77 5 Fiber Shim for Hinge Butt (1/16”) (Not Shown) 4175-077-01 4175-77


ECN CS-2479 51 J9044052 Rev W


33. SUPER FREEZER DOOR HINGE H9 #4047 Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv Complete Hinge (for 5-3/4” Thick Door) 4047-001-01 4047-1 Assy. Galv Complete Hinge (for 7-3/4” Thick Door) 4047-001-02 4047-1 Assy. Galv Complete Hinge (for 9-3/4” Thick Door) 4047-001 4047-1 Assy. Chr Complete Hinge (for 5-3/4” Thick Door) 4047-022-01 4047-22 Assy. Chr Complete Hinge (for 7-3/4” Thick Door) 4047-022-02 4047-22 Assy. Chr Complete Hinge (for 9-3/4” Thick Door) 4047-022-03 4047-22 1 Galv Frame Butt (for 5-3/4” Thick Door) 4047-002-01 4047-2-4 1 Galv Frame Butt (for 7-3/4” Thick Door) 4047-002-03 4047-2-6 1 Galv Frame Butt (for 9-3/4” Thick Door) 4047-002-05 4047-2-8 1 Chr Frame Butt (for 5-3/4” Thick Door) 4047-002-02 4047-2-4 1 Chr Frame Butt (for 7-3/4” Thick Door) 4047-002-04 4047-2-6 1 Chr Frame Butt (for 9-3/4” Thick Door) 4047-002-06 4047-2-8 2 Galv Door Butt 4047-003-01 4047-3 2 Chr Door Butt 4047-003-02 4047-3 3 Galv Link 4047-004-01 4047-4 3 Chr Link 4047-004-02 4047-4 4 Spring 482-010 4047-5 5 Galv Hinge Pin (1/2” x 4-1/2”) 4047-006-01 4047-6 5 Chr Hinge Pin (1/2” x 4-3/8”) 4047-010-01 4047-10 6 Galv Washer (1-3/8” x 9/16” x #20 GA) 753-019 6 Chr Washer (1-3/8” x 9/16” x #16 GA) 753-156 7 Spring Pressure Bolt (7/16” x 3-1/2”) 751-436 8 Galv Washer (1-3/8” x 9/16” x #16 GA) 753-018 4047-7 8 Chr Washer (1-3/8” x 9/16” x #16 GA) 753-156 9 Galv Nuts (7/16”-14NC) 752-109 9 Chr Nuts (7/16”-14NC) 752-152 10 Chr Acorn Nut (7/16”-14NC) (Not Shown) 752-016


ECN CS-2479 52 J9044052 Rev W


34. AP TYPE HEAVY DUTY HINGE WITH THRUST BEARING (GALV) H10

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete Hinge (18” Blade) 4043-008-01 4043-8 Assy. Complete Hinge (26” Blade) 4043-008-02 4043-8 Assy. Complete Hinge (34” Blade) 4043-008-03 4043-8 Assy. Complete Hinge (42” Blade) 4043-008-04 4043-8 1 Hinge Blade 18” 4043-024-01 4043-24 1 Hinge Blade 26” 4043-024-02 4043-24 1 Hinge Blade 34” 4043-024-03 4043-24 1 Hinge Blade 42” 4043-024-04 4043-24 2* Hinge Pin (3/4” x 6”) W/Grease Fitting 4200-002-01 4200-2 3 Thrust Washer (Steel) (1-3/4” x 13/16” x 1/8”) 753-023 4 Thrust Washer (Steel) (1-3/4” x 13/16” x #14 GA) 753-044 5 Thrust Washer (Brass) (1-3/4” x 13/16” x 1/8”) 753-251 6 Hinge Butt with Set Screw 4043-002-03 4043-2 7 Set Screw (5/16” x 3/8”) 767-104 8 PP Shim for Hinge Butt (1/16”) 4043-034-03 4043-34 8 Fiber Shim for Hinge Butt (1/8”) 4043-034-02 4043-34 8 Fiber Shim for Hinge Butt (1/16”) 4043-034-01 4043-34 8 Galv Shim for Hinge Butt (20 GA) (Non-Slotted) 4043-102-01 4043-102

*1 15/16” Offset Standard (Flush to 2” Offset to Order) Note: See instruction sheet for ordering parts.

ECN CS-2479 53 J9044052 Rev W


35. AP TYPE HEAVY DUTY HINGE W/BALL BEARING (GALV) H11 #4043

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete Hinge (18” Blade) 4043-095-01 4043-95 Assy. Complete Hinge (26” Blade) 4043-095-02 4043-95 Assy. Complete Hinge (34” Blade) 4043-095-03 4043-95 Assy. Complete Hinge (42” Blade) 4043-095-04 4043-95 1 Galv Hinge Blade 18” 4043-003-01 4043-3 1 Galv Hinge Blade 26” 4043-003-02 4043-3 1 Galv Hinge Blade 34” 4043-003-03 4043-3 1 Galv Hinge Blade 42” 4043-003-04 4043-3 2 Hinge Pin (3/4” x 6”) w/Grease Fitting 4240-006-01 4240-6 3 Chr Thrust Washer (1-1/2” x 13/16” x 1/8”) 753-206 4 Thrust Ball Bearing 481-056 5 Hinge Butt 4240-002-02 4240-2 6 Set Screw (5/16” x 3/8”) 767-104 7 PP Shim for Hinge Butt (1/16”) 4043-034-03 4043-34 7 Fiber Shim for Hinge Butt (1/16”) 4043-034-01 4043-34

**1 5/16” Offset Standard (Flush to 2” Offset to Order) Note: See instruction sheet for ordering parts.

ECN CS-2479 54 J9044052 Rev W


36. AP TYPE HEAVY DUTY HINGE (CHROME) H12 #4240

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete Hinge (18” Blade) 4240-001-01 4240-1 Assy. Complete Hinge (26” Blade) 4240-001-02 4240-1 Assy. Complete Hinge (34” Blade) 4240-001-03 4240-1 Assy. Complete Hinge (42” Blade) 4240-001-04 4240-1 1 Galv Hinge Blade 18” 4043-003-01 4043-3 1 Galv Hinge Blade 26” 4043-003-02 4043-3 1 Galv Hinge Blade 34” 4043-003-03 4043-3 1 Galv Hinge Blade 42” 4043-003-04 4043-3 2 Hinge Pin (3/4” x 6”) w/Grease Fitting 4240-006-01 4240-6 3 Chr Thrust Washer (1-1/2” x 13/16” x 1/8”) 753-206 4 Hinge Butt 4240-002-02 4240-2 5 Set Screw (5/16” x 3/8”) 767-104 6 PP Shim for Hinge Butt (1/16”) 4043-034-03 4043-34 6 Fiber Shim for Hinge Butt (1/8”) 4043-034-02 4043-34 6 Fiber Shim for Hinge Butt (1/16”) 4043-034-01 4043-34

*1 ¼” Offset Standard (Flush to 2” Offset to Order) Note: See instruction sheet for ordering parts.

ECN CS-2479 55 J9044052 Rev W


37. KASON H13

3. K-1240 KASON CAM-RISE 1240 ALUMINUM HINGE

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. F Complete Hinge (RH) (Tuffkote) 431-400 Assy. F Complete Hinge (LH) (Tuffkote) 431-401 Assy. 1-3/8” Complete Hinge (LH) (Baked Enamel) 431-402 Assy. 1-3/8” Complete Hinge (RH) (Baked Enamel) 431-403 Assy. 1-3/8” Complete Hinge (LH) (Bright Anodite) 431-404 Assy. 1-3/8” Complete Hinge (RH) (Bright Anodite) 431-405 Assy. 1-1/4” Complete Hinge (LH) Bright Anodite) Assy. For Use with Jamolite Doors Only) 431-406 Assy. 1-1/4” Complete Hinge (RH) (Bright Anodite) For Use with Jamolite Doors Only) 431-407 Assy. F Complete Hinge (LH) (Bright Anodite) (Offset Cam Lift) 431-408 Assy. F Complete Hinge (RH) (Bright Anodite) (Offset Cam Lift) 431-409 1. Fiber Hinge Shim (1/16”) (Not Shown) 4188-095-01 4188-095 1. SST Hinge Shim (1/16”) (Not Shown) 4188-095-02 4188-095 1. PP Hinge Shim (1/16”) (Not Shown) 4188-095-03 4188-095 1. Galv Hinge Shim (20 GA) (Not Shown) 4188-119-01 4188-119 1. SST Hinge Shim (20 GA) (Not Shown) 4188-119-11 4188-119 Note: See instruction sheet for ordering parts.

ECN CS-2479 56 J9044052 Rev W


4. K1037 AVAILABLE IN CHROME FINISH ONLY

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. F Complete Hinge (LH) 431-001 Assy. F Complete Hinge (RH) 431-002 Assy. 1-1/4” Complete Hinge (LH) 431-003 Assy. 1-1/4” Complete Hinge (RH) 431-004 1* Hinge Blade 2* F Hinge Butt 2* O Hinge Butt 3 Hinge Pin 431-158 4 Hinge Bearing (Nylon) 431-161 5 Fiber Shim for Hinge Butt (1/16”) (Not Shown) 4188-091-01 4188-91 5 Fiber Shim for Hinge Butt (1/32”) (Not Shown) 4188-091-02 4188-91 5 PP Shim for Hinge Butt (1/16”) (Not Shown) 4188-091-03 4188-91 6 Shim for Hinge Blade (26 GA) (Not Shown) 4315-041-01 4315-41 *Hinge Blade and Butt sold as an Assy. Only

5. K1055 AVAILABLE IN CHROME FINISH ONLY

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. 1-5/16” Complete Hinge (LH) 431-150 Assy. 1-5/16” Complete Hinge (RH) 431-151 Assy. 1-7/16” Complete Hinge (LH) 431-152 Assy. 1-7/16” Complete Hinge (RH) 431-153 Assy. F Complete Hinge (LH) 431-154 Assy. F Complete Hinge (RH) 431-155 Assy. 1-1/4” Complete Hinge (LH) 431-159 Assy. 1-1/4” Complete Hinge (RH) 431-160 1* Hinge Blade (Advise Offset) 2* Hinge Butt 3 Hinge Pin 431-158 4 Hinge Bearing (Nylon) 431-161 5 PP Shim for Hinge Butt (1/16”) (Not Shown) 4188-091-03 4188-91 5 Fiber Shim for Hinge Butt (1/32”) (Not Shown) 4188-091-02 4188-91 5 Fiber Shim for Hinge Butt (1/16”) (Not Shown) 4188-091-01 4188-91 6 Shim for Blade (26 GA) (Not Shown) 4315-056-01 4315-56 * Hinge Blade and Butt Sold as Assy. Only Note: See instruction sheet for ordering parts.

ECN CS-2479 57 J9044052 Rev W


6. K1073AVAILABLE IN CHROME FINISH ONLY Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. 1-7/16” Complete Hinge (LH) 431-204 Assy. 1-7/16” Complete Hinge (RH) 431-205 1* Hinge Blade 2* Hinge Butt 3 Hinge Pin 431-206 4 Hinge Bearing (Nylon) 431-161 5 Fiber Shim for Hinge Butt (1/16”) (Not Shown) 4188-085-01 4188-85 5 PP Shim for Hinge Butt (1/16”) (Not Shown) 4188-085-02 4188-85 *Hinge Blade and Butt Sold as Assy. Only

7. K1398 KASON HEAVY DUTY CAM RISE HINGE

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. 3-1/2” Complete Hinge (LH) (Tuffkote) 431-008 Assy. 3-1/2” Complete Hinge (RH) (Tuffkote) 431-009 Assy. Chr 3-1/2” Complete Hinge (LH) 431-010 Assy. Chr 3-1/2” Complete Hinge (RH) 431-011 Assy. 2-1/2” Complete Hinge (Baked Enamel) 435-001 1 Fiber Hinge Butt Shim (1/16”) (Not Shown) 4188-106-01 4188-106 1 PP Hinge Butt Shim (1/16”) (Not Shown) 4188-106-02 4188-106


ECN CS-2479 58 J9044052 Rev W


38. DENT HINGES

1. D-31 Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. BChr F Complete Hinge (RH) 432001 Assy. BChr F Complete Hinge (LH) 432-002 Assy. BChr 1-1/4” Complete Hinge (RH) 432-012 Assy. BChr 1-1/4” Complete Hinge (LH) 432-013 1 Fiber Hinge Butt Shim (1/16”) (Not Shown) 4306-008-01 4036-8 1 PP Hinge Butt Shim (1/16”) (Not Shown) 4306-008-02 4036-8 1 Blade Shim (26 GA) (Not Shown) 4315-048-01 4315-4

2. D-1PS

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. BChr F Complete Hinge (Floating) 432-003 Assy. BChr 1-1/4” Complete Hinge (Floating) 432-014 1 Fiber Hinge Butt Shim (1/16”) (Not Shown) 4306-008-01 4306-8 1 PP Hinge Butt Shim (1/16”) (Not Shown) 4306-008-02 4306-8

3. D-12400

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. SST 1-3/8” Complete Hinge (Reversible) 432-017 1. Fiber Hinge Shim (1/16”) (Not Shown) 4188-095-01 4188-095 1. PP Hinge Shim (1/16”) (Not Shown) 4188-095-03 4188-095

ECN CS-2479 59 J9044052 Rev W


4. DENT D-310

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. SST 1-3/8” Complete Hinge 432-015 Assy. SST F Complete Hinge 432-016 1 Fiber Butt Shim (1/16”) (Not Shown) 4306-027-01 4306-27 1 PP Butt Shim (1/16”) (Not Shown) 4306-027-02 4306-27 1 SST Butt Shim (16 GA) (Not Shown) (Cooler) 4306-041-01 4306-41 1 SST Butt Shim (10 GA) (Not Shown) (Cooler) 4306-041-02 4306-41 1 SST Butt Shim (16 GA) (Not Shown) (Freezer) 4306-041-03 4306-41 1 SST Butt Shim (10 GA) (Not Shown) (Freezer) 4306-041-04 4306-41


39. CAM-N-BALL TWO-WAY GRAVITY HINGES (FOR AUTO-CLOSE DOORS) H14

ECN CS-2479 60 J9044052 Rev W


Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv Top Cam Reservoir Assy. (Standard Duty) (Consists of Items in Group (a)) 4193-001-21 Assy. Galv Top Cam Reservoir Assy. (Heavy Duty) (Consists of Items in Group (a)) 4194-001-21 Assy. Chr Top Cam Reservoir Assy. (Standard Duty) (Consists of Items in Group (a)) 4193-001-22 Assy. Chr Top Cam Reservoir Assy. (Heavy Duty) (Consists of Items in Group (a)) 4194-001-22 1X Shaft Cam (Standard Duty) (No Holes) 4193-005-01 1 Shaft Cam (Heavy Duty) (No Holes) 4194-005-01 1X a Shaft Cam (Standard Duty Assy.) 4193-005-02 1 a Shaft Cam (Heavy Duty Assy.) 4194-005-02 1X a Shaft Cam, Pin, Set Screw (Standard Duty) 4193-005-21 1 a Shaft Cam, Pin, Set Screw (Heavy Duty) 4194-005-21 2X a Adjustable Reservoir Cam (Standard Duty) 4193-004-01 2 a Adjustable Reservoir Cam (Heavy Duty) 4194-004-01 3X a Bronze Cam Bearing (Standard Duty) 4169-003-01 3 a Bronze Cam Bearing (Heavy Duty) 4171-003-01 4X a Top Reservoir Housing (Standard Duty) (Nickel Plate) 4193-002-01 4X a Chr Top Reservoir Housing (Standard Duty) 4193-002-02 4 a Top Reservoir Housing (Heavy Duty) (Nickel Plate) 4194-002-01 4 a Chr Top Reservoir Housing (Heavy Duty) 4194-002-02 5 a Galv Lubricant Fitting 489-027 6 a Galv Set Screws (3/8" x 5/8") 767-202 7 Galv Center Bearing Base 4193-007-01 7 Chr Center Bearing Base 4193-007-02 8 Galv Center Bearing Cap 4193-006-01 8 Chr Center Bearing Cap 4193-006-02 9 Galv Bottom Bearing 4169-010-01 9 Chr Bottom Bearing 4169-010-02 10 Galv Top Cam Reservoir Shim 4193-009-01 10 Chr Top Cam Reservoir Shim 4193-009-02 11 Roll Pin (5/16” x 1-7/8”) 754-020 12 Set Screw (3/8” x16 x 3/8”) 767-106

Note: See instruction sheet for ordering parts. Also state the WIC and HIC of the opening.

ECN CS-2479 61 J9044052 Rev W


40. B-3044-8 DOUBLE ACTING HINGE (FOR MAILING VESTIBULE DOORS) H15

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Complete Hinge (Alum. Lacquer) (Aprox. 9” High) 439-010 2 Spring (1-1/4” OD x 6” Long) 439-909 3 Tension Pin 439-908 4 Shim for Hinge Door Flange (1/16”) 4194-077-01 4194-77 4 Shim for Hinge Door Flange (1/8”) 4194-077-02 4194-77


ECN CS-2479 62 J9044052 Rev W


41. CS1-AP DOUBLE ACTING HINGE (FOR MAILING VESTIBULE DOORS) H16

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Complete Hinge (Alum. Lacquer) (Aprox. 16” High) 439-007 4381-11 2 Spring (1-1/16” OD x 8”) 439-900 4381-6 3 Hinge Pin 439-905 4381-8 4 Tension Rivet 439-906 4381-9 5 Set Screw for Hinge Pin 439-907 4381-10 6 Shim for Hinge Door Flange (1/16”) 4194-077-01 4381-12


ECN CS-2479 63 J9044052 Rev W


42. GSH HINGE

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 GSH-HS-SS (RH) 432-020 2 GSH-HS-SS (LH) 439-019 3 GSH-DHS 439-021 4 SST GSH-HS-SS Shim (16 GA) 4188-140-01 5 SST GSH-HS-SS Shim (10 GA) 4188-140-02 5 PP GSH-HS-SS Shim (1/16”) 4188-140-05 6 SST Oval Head Machine Screw (1/4 x 1-1/4”) 764-507 7 SST Oval Head Machine Screw (1/4 x 1-3/4”) 764-510 8 Tee Nut Pronged (1/4-20 x 9/16) 752-405 9 SST GSH-DHS Shim (16 GA) 4188-141-01 10 SST GSH-DHS Shim (10 GA) 4188-141-02 10 PP GSH-DHS Shim (1/16”) 4188-141-05 11 SST GSH-HS-SS Shim (16 GA) Freezer Doors Only 4188-140-03 12 SST GSH-HS-SS Shim (10 GA) Freezer Doors Only 4188-140-04 12 PP GSH-HS-SS Shim (1/16”) Freezer Doors Only 4188-140-06 13 SST GSH-DHS Shim (16 GA) Freezer Doors Only 4188-141-03 14 SST GSH-DHS Shim (10 GA) Freezer Doors Only 4188-141-04 14 PP GSH-DHS Shim (1/16”) Freezer Doors Only 4188-141-06


ECN CS-2479 64 J9044052 Rev W


MISCELLANEOUS

43. WINDOWS - REPLACEMENT FOR COLD STORAGE AND DOUBLE ACTING DOORS M13

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Kit 12” x 14” Window Field Installation Kit (Cooler) (2” Door) (Gray) 4180-053-91 4180-53 Kit 12” x 14” Window Field Installation Kit (Cooler) (4” Door) (Gray) 4180-053-92 4180-53 Kit 12” x 14” Window Field Installation Kit (Cooler) (2” Door) (White) 4180-053-93 4180-53 Kit 12” x 14” Window Field Installation Kit (Cooler) (4” Door) (White) 4180-053-94 4180-53 1 Sealed Glass Unit, 12” x 14” (Consisting of 4 Layers of 1/4” Clear Plate Glass With 1/2” Air Spaces Between Layers) 913-002 1 Sealed Glass Unit, 12” x 14” (Consisting of 2 layers of 1/4” Tempered Glass With 1/2” Air Space Between) 913-003 1 Sealed Glass Unit, 12” x 14” x 1” (Consisting of 3 Layers of Tempered Glass) Heated at 12 W / F

2 913-004

2 Clear Wire Glass (12” x 12” x 1/4” Thick) 912-003 3 Clear Plexiglass (8 1/8” x 14” x 1/4” Thick) 911-002 4 Clear Lexan (8 1/8” x 14” x 1/4” Thick) 911-009 5 Clear Acrylic (12” x 12” x 1/4” Thick) 911-003 6 Clear Wire Glass (8” Diameter x 1/4” Thick) 912-001 7 Clear Plate Glass (8” Diameter x 1/8” Thick) (Other Size Glass to Special Order) 912-100 8 Heater for 12” x 14” Window (115 V) (Not Shown) 192-010 8 Heater for 12” x 14” Window (230 V) (Not Shown) 192-011


ECN CS-2479 65 J9044052 Rev W


44. WINDOWS - REPLACEMENT FOR POST OFFICE MAILING VESTIBULE DOORS M14

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Outer Retainer (Top and Bottom) (18-3/4” Long) 4194-023-14 4194-23 2 Outer Retainer (sides) (13-1/8” Long) 4194-023-15 4194-23 3 Frame Assy. with Center Tee and Center Retainer (18-3/4” x 16-1/8”) 4194-023 4194-23 4 Vertical Inner Retainer (14-5/16” Long) 4194-023-16 4194-23 5 Horizontal Inner Retainer (8-1/4” Long) 4194-023-17 4194-23 6 Screw for Inner Retainer (#8-32 x 1/4”) 765-103 7 Clear Plastic Vision Panel (1/4” x 8-1/8” x 14”) 911-002 7 Clear Lexan Vision Panel (1/4” x 8-1/8” x 14”) 911-009 ---------- Complete Window Assy. (Without Outer Retainers) 4194-023-01 4194-23 ---------- Complete Window Assy. (w/Outer Retainers) 4194-023-01 4194-23

Note: See instruction sheet for ordering parts

ECN CS-2479 66 J9044052 Rev W


45. MISCELLANEOUS HARDWARE M18

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Galv Auto Close Vestibule Door Push Knob Contact Bracket with 3” Projection 4146-002-01 4146-2 1 Chr Auto Close Vestibule Door Push Knob Contact Bracket with 3” Projection 4146-002-02 4146-2 2 Galv Auto Close Vestibule Door Push Knob Contact Bracket with 4 3/8” Projection 4146-001-01 4146-1 2 Chr Auto Close Vestibule Door Push Knob Contact Bracket with 4 3/8” Projection 4146-001-02 4146-1 3 Galv Back Handle Guard (for Use With K-55/K-56) 4341-002-01 4341-2 3 Chr Back Handle Guard (for Use With K-55/K-56) 4341-002-02 4341-2 4 Galv Back Handle Guard (for Use With W-2/E-Z Open) 4042-029-01 4042-29 5 Chr Back Handle Guard (for Use With W-2/E-Z Open) 4042-056-01 4042-56 6 Galv Door Pull (7-3/4” Long) 251-010 4038-1 6 Chr Door Pull (7-3/4” Long) 4038-001-02 4038-1 6 PC Door Pull (7-3/4” Long) Chrome Color Power Coat 4038-027-01 4038-27 7 Galv Door Pull (6” Long) 4038-002-11 4038-2 8 Chr Door Pull (6-3/4”Long) 4038-004-01 4038-4 9 Galv Combination Door Pull and Escutcheon 4038-003-11 4038-3 9 Chr Combination Door Pull and Escutcheon 4038-003-02 4038-3 10 Chr Front Door Pull (for Jamoclear) (5’0” Long) 4315-070-01 4315-70

Note: See instruction sheet for ordering parts

ECN CS-2479 67 J9044052 Rev W


46. 400 DOOR CLOSER #4062 M9

ECN CS-2479 68 J9044052 Rev W


Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete Door Closer (Powder Coat) (LH) 4062-001-01 4062-1 Assy. Chr Complete Door Closer (LH) 4062-023-01 4062-23 Assy. Complete Door Closer (Powder Coat) (RH) 4062-001-51 4062-1 Assy. Chr Complete Door Closer (RH) 4062-023-51 4062-23 1 Housing Only (Powder Coat) w/Door Plate 4062-002-01 4062-2 1 Chr Housing Only w/Door Plate 4062-002-02 4062-2 1 Housing w/Internal Components (LH) (Powder Coat) 4062-001-10 4062-1 2 Tension Pin 4062-003-01 4062-3 3 Spring (for Right Hand Closer) 482-011 4062-4 3 Spring (for Left Hand Closer) 482-012 4062-4 4 Ratchet (Powder Coat) 4062-022-01 4062-22 4 Chr Ratchet 4062-022-02 4062-22 5 Galv Collar 4062-006-01 4062-6 5X Cotter Pin (5/16” x 1-1/2”) 754-311 6 a Arm (Powder Coat) 4062-008-01 4062-8 6 Chr Arm 4062-008-02 4062-8 7 a Galv Roller 4062-009-01 4062-9 7 Chr Roller 4062-017-01 4062-17 8 a Pin (5/16” X 1-1/8”) (Powder Coat) 755-006 4062-16 8 Chr Pin (5/16” x 1-1/8”) 755-202 4062-18 Assy. Arm and Roller (LH) (Powder Coat) (Consists of Items in Group (a)) 4062-007-01 4062-7 Assy. Arm and Roller (LH) (Powder Coat) (Consists of Items in Group (a)) 4062-007-51 4062-7 9 SST Roll Pin (1/4” x 1-3/4”) 754-052 10 SST Wear Plate 4062-050-02 11 Locking Pawl (Powder Coat) 4062-011-01 4062-11 11 Chr Locking Pawl 4062-011-02 4062-11 12 Galv Pawl Pin (1/4” x 2-1/2”) 755-004 4062-15 12 Chr Pawl Pin (1/4” x 2-1/2”) 755-200 4062-19 13 Galv Spring Shaft 4062-012-01 4062-12 13 Chr Spring Shaft 4062-012-02 4062-12 14 Arm (for Super Freezer) 4” Insulation (Powder Coat) 4062-013-01 4062-13 14 Arm (for Super Freezer) 6” Insulation (Powder Coat) 4062-013-03 4062-13 14 Arm (for Super Freezer) 8” Insulation (Powder Coat) 4062-013-05 4062-13 14 Chr Arm (for Super Freezer) 4” Insulation 4062-013-02 4062-13 14 Chr Arm (for Super Freezer) 6” Insulation 4062-013-04 4062-13 14 Chr Arm (for Super Freezer) 8” Insulation 4062-013-06 4062-13 15 Galv Door Plate (for Super Freezer) 4062-014-01 4062-14 15 Chr Door Plate (for Super Freezer) 4062-014-02 4062-14

Note: See instruction sheet for ordering parts. Also state if the closer is for a Super Freezer Door and the overall thickness of the door.

ECN CS-2479 69 J9044052 Rev W


47. NORTON DOOR CLOSER M10

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Painted Complete Assy. 489-074 Assy. Chr Complete Assy. 489-075 2 Painted Arm Assy. 489-069 2 Chr Arm Assy. 489-068 3 Painted Soffit Plate (Not Shown) (For Back Mounting Only) 489-067 3 Chr. Soffit Plate (Not Shown)(For Back Mounting Only) 489-071


ECN CS-2479 70 J9044052 Rev W


48. PANIC TYPE BUMP OPEN BAR #4346 (FOR USE WITH K-55 AND K-56 FASTENERS) M2

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete Bar Assy. for K56 Fastener (Consists of Items in Group (d)) 4346-010 4346-10 Assy. Complete Bar Assy. for K55 Fastener (Consists of Items in Group (e)) 4346-009 4346-9 1 de Galv Bearing 4346-002-01 4346-2 1 de Chr Bearing 4346-002-02 4346-2 2 de SST Bar (for 2’6” Wide Door) 4346-003-02 4346-3 2 de Chr Bar (for 2’6” Wide Door) 4346-003-12 4346-3 2 de SST Bar (for 3’0” Wide Door) 4346-003-03 4346-3 2 de Chr Bar (for 3’0” Wide Door) 4346-003-13 4346-3 2 de SST Bar (for 3’6” Wide Door) 4346-003-04 4346-3 2 de Chr Bar (for 3’6” Wide Door) 4346-003-14 4346-3 2 de SST Bar (for 4’0” Wide Door) 4346-003-05 4346-3 2 de Chr Bar (for 4’0” Wide Door) 4346-003-15 4346-3 2 de SST Bar (for 4’6” Wide Door) 4346-003-06 4346-3 2 de Chr Bar (for 4’6” Wide Door) 4346-003-16 4346-3 2 de SST Bar (for 5’0” Wide Door) 4346-003-07 4346-3 2 de Chr Bar (for 5’0” Wide Door) 4346-003-17 4346-3 3 d Spring (for K56 only) 482-022 4277-166 4 e Spring (for K55 only) 482-015 4346-8


ECN CS-2479 71 J9044052 Rev W


49. TRILOGY EXIT TRIM

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Exit Trim Sub-Assy. (4” LH Swing) 4407-207-01 1 Exit Trim Sub-Assy. (4” RH Swing) 4407-209-01 1 Exit Trim Sub-Assy. (6” LH Swing) 4407-208-01 1 Exit Trim Sub-Assy. (6” RH Swing) 4407-210-01 2 Exit Device (Von Duprin Model #98EO) 451-004 3 Screw, Round Head Machine (8-32 X1”) 764-142 (Optional Electric Operation Only) 4 Pop Rivet (1/8” X 1/4” AD44H) 755-357 5 Receptacle, Snap-in (120 VAC) 199-013 6 AC adapter (120VAC to 7.5 VDC) 199-014 7 Receptacle Mounting Bracket 4407-202-01


ECN CS-2479 72 J9044052 Rev W


50. VON DUPRIN 992L EXIT TRIM

NO LONGER AVAILABLE

ECN CS-2479 73 J9044052 Rev W


51. TACO/CAL-ROYAL BUMP OPEN BAR

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Taco Fastener 451-002 2 Keeper (Not Shown) 451-007 3 Keeper Shim (Not Shown) 4425-006-01 4425-6 4 Cal-Royal Fastener (Right Hand) 4425-049-51 4425-49 5 Cal-Royal Fastener (Left Hand) 4425-049-01 4425-49 *There are no replaceable parts for the fastener.


52. CAL-ROYAL LEVER EXIT TRIM

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Exit Trim, Left Hand Swing 440736201 H4407362 2 Exit Trim, Right Hand Swing 440736202 H4407362 *There are no replaceable parts for the fastener.


ECN CS-2479 74 J9044052 Rev W


53. DENT D-70 BUMP BAR (FOR USE WITH DENT D-600 LATCH)

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Chr D-70 Bump Bar Assy, (SST. Bar , SST Pivots) 451-012 1 Galv D-70 Bump Bar Assy. (SST. Bar, Alum Pivots) 451-013 *Bar comes in one size only.


1

ECN CS-2479 75 J9044052 Rev W


54. FROSTOP (HEATER CABLE) SYSTEM M11

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 “A” White Frostop Wire (27 Ft. Long) (#26 GA, 210 W) Furnished with Loops 4272-179-02 4272-179 Furnished without Loops 4272-179-01 4272-179 2 “B” Black Frostop Wire (34 Ft. Long) (#24 GA, 260 W) Furnished with Loops 4272-180-02 4272-180 Furnished without Loops 4272-180-01 4272-180 3 “C” Red Frostop Wire (42 Ft. Long) (#22 GA, 330 W) Furnished with Loops 4272-181-02 4272-181 Furnished without Loops 4272-181-01 4272-181 4 “D” Green Frostop Wire (54 Ft. Long) (#20 GA, 410 W) Furnished with Loops 4272-182-02 4272-182 Furnished without Loops 4272-182-01 4272-182 5 Transmission Wire w/Silicone Cover (#14 A.W.G.) (Length to Order) 123-200 6 Galv Thermostat Box Cover w/Label Plate (Specify Swing, Model, and Watts) 4272-125-01 4272-125 6 Chr Thermostat Box Cover w/Label Plate (Specify Swing, Model, and Watts) 4272-125-02 4272-125 7 Galv Thermostat Box Base 4272-124-01 4272-124 8 Thermostat w/Sensing Bulb, Knobs, Nut, Washer, and Screws 4272-141-01 4272-141 9 Adjusting Knob with Set Screw Knob 486-035 4272-127 Set Screw 767-101 10 Gasket for Adjusting Knob 4272-137-01 4272-137 11 Gasket for Frostop Box (NEMA 3, 4, and 12 only) 4272-235-01 4272-235 12 Rubber Washer (for Label Cover Screws of NEMA 3, 4 and 12 only) (Not Shown) 559-025 13 Ground Strap with Screws (Jamolite only) (Not shown) (Strap) (Ends) (Screw) 129-001 191-201 765-604 14 Indicator Lamp w/Terminal (Not Shown) 4290-073-01 4290-73 Assy. Galv Complete Thermostat Box (LH) Assy. (NEMA 1) (Std.) with 30” Capillary Tube 4272-126-14 4272-126 Assy. Galv Complete Thermostat Box (RH) Assy. (NEMA 1) (Std.) with 30” Capillary Tube 4272-126-24 4272-126 Assy. Galv Complete Thermostat Box Assy. (NEMA 3, 4, and 12) With 30” Capillary Tube 4272-244-01 4272-244 Assy. Chr Complete Thermostat Box Assy. (NEMA 1) (Standard) With 30” Capillary Tube 4272-126-15 4272-126 Assy. Chr Complete Thermostat Box Assy. (NEMA 3. 4, and 12) With 30” Capillary Tube 4272-244-02 4272-244


ECN CS-2479 76 J9044052 Rev W


55. SPRING STEEL BUMPERS FOR DOUBLE ACTING AUTO-CLOSE DOORS M16

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Galv Spring Steel Bumper (8” High x 20” Long x 1/8” Thick) 4147-001-01 4147-1 2 Strap for Reference #1 or #5 4147-002-01 4147-2 3 SST Bumper (8” High x 19” Long x 7/64” Thick) 489-004 4147-10 4 Strap for Reference #3 489-004 4147-10 5 Galv Spring Steel Bumper (8” High x 28” Long x 1/8” Thick) 4147-014-01 4147-14 6 Galv Spring Steel Bumper (10” High x 28” Long x 1/8” Thick) 4147-019-01 4147-19 7 Strap for Reference #6 4147-015-01 4147-15 8 Galv Spring Steel Bumper (12” High x 28” Long x 1/8” Thick) 4147-020-01 4147-20 9 Strap for Reference #8 4147-022-01 4147-22 10 Galv Spring Steel Bumper (18” High x 28” Long x 1/8” Thick) 4147-021-01 4147-21 11 Strap for Reference #10 4147-023-01 4147-23 12 Rubber Bumper Assy. 18” (Not Shown) 4147-037-01 4147-37 12 Rubber Bumper Assy. 36” (Not Shown) 4147-040-01 4147-40 13 Hex Head Machine Bolt 3/8-16 x 2-1/4” (Not Shown) 751-425 14 Hex Nut 3/8-16 752-107 15 Rubber Bumper Retainer 17-1/8” x 1-1/2” x 17” (Not Shown) 4147-038-01 4147-38 15 Rubber Bumper Retainer 35-1/8” x 1-1/2” x 35” (Not Shown) 4147-039-01 4147-39


ECN CS-2479 77 J9044052 Rev W


56. HOOK AND BUMPER M17

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv Complete Door Hold Open Hook and Bumper (S/A) (Consists of Items in Group (a)) 4127-001-20 4127-1 Assy. Chr Complete Door Hold Open Hook and Bumper (S/A) (Consists of Items in Group (a)) 4127-001-21 4127-1 1 a Galv Wall Bracket 4127-002-01 4127-2 1 a Chr Wall Bracket 4127-002-02 4127-2 2 a Galv Trip Hook 4127-003-01 4127-3 2 a Chr Trip Hook 4127-003-03 4127-3 3 a Galv Trip Hook Pin 755-007 4127-7 3 a Chr Trip Hook Pin 755-203 4127-7 4 a Spring 482-017 4127-4 5 Rubber Cushion 4127-005-01 4127-5 6 Galv Door Bracket 4127-006-01 4127-6 6 Chr Door Bracket 4127-006-02 4127-6 * For complete Assy. Order S/A and Item #6


ECN CS-2479 78 J9044052 Rev W


57. FLEXIBLE RUBBER TRACK FLAPS M12

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Track Flap Assy. For Hinged Plyfoam Type Door (for 8-1/2” Wide (Top) x 18” Wide (Bottom) x 11-3/4” High Port Opening as Std.) (Other Sizes to Order) Assy. with Galv. Retainers 4183-108-01 4183-108 Assy. with Stainless Steel Retainers 4183-108-02 4183-108 2 Track Flap Assy. for Auto Close and Plyfoam Vestibule Type Door (for 8-1/2” Wide (Top) x 18” Wide (Bottom) x 11-3/4” High Port Opening as Std.) (Other Sizes to Order) Assy. with Galv. Retainers 4183-115-01 4183-115 Assy. with Stainless Steel Retainers 4183-115-02 4183-115 3 Track Flap Assy. for Hinged Doors with Rectangular Track Port (for 8” Wide x 10-3/4” High Port Opening as Std.) (Other Sizes to Order) Assy. with Galv. Retainers 4183-089-01 4183-89 Assy. with Stainless Steel Retainers 4183-089-02 4183-89 4 Track Flap Assy. for Auto Close and Vestibule Door with Rectangular Track Port (for 8” Wide x 10-3/4” High Port Opening as Std.) (Other Sizes to Order) Assy. with Galv. Retainers 4183-090-01 4183-90 Assy. with Stainless Steel Retainers 4183-090-02 4183-90


ECN CS-2479 79 J9044052 Rev W


58. SPRING ASSIST FOR AUTO-CLOSE POST OFFICE MAILING VESTIBULE DOORS M15

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Complete Spring Assist Assy. (Consists of Items in Group (a)) 4194-022-01 4194-22 1 Jamb Guard (Primed) 4194-020-01 4194-20 2 a Shaft 4194-025-01 4194-25 3 a Roll Pin (3/16” x 1-1/4”) 754-007 4 a Thrust Ball Bearing 481-056 5 a Spring Retainer 4194-009-01 4194-9 6 a Spring 482-020 4194-19 7 a Cotter Pin (1/8” x 1-1/4”) 754-307 8 a Adjusting Nut 752-114 9 Bottom Bearing (Reference Only) See Parts List H14


59. 1095 SPRING ACTION DOOR CLOSER

Ref # Group Finish Offset Name of Part Stock No. Drawing No. 1 Chr Closer 489-080 2 Chr 1-1/8 Hook 480-092


ECN CS-2479 80 J9044052 Rev W


60. 1097 DOOR CLOSER

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. Galv Complete Door Closer 489-072 Assy. Chr Complete Door Closer 489-073 1 Galv Rod 489-076 1 Chr Rod 489-077 2 Galv Roller Guide Assy. 489-078 2 Chr Roller Guide Assy. 489-079 3 Galv Spacer Block Large 4407-262-01 4407-262 3 SST Spacer Block Large 4407-262-02 4407-262 4 Galv Spacer Block Small 4407-263-01 4407-263 4 SST Spacer Block Small 4407-263-02 4407-263


ECN CS-2479 81 J9044052 Rev W


61. D-897 DOOR CLOSER

Ref # Group Finish Offset Name of Part Stock No. Drawing No. Assy. SST Complete Door Closer 489-093 1 SST Rod 489-094 2 SST Roller Bracket Assy. 489-098 3 Galv Spacer Block Large 4407-262-01 4407-262 3 SST Spacer Block Large 4407-262-02 4407-262 4 Galv Spacer Block Small 4407-263-01 4407-263 4 SST Spacer Block Small 4407-263-02 4407-263


ECN CS-2479 82 J9044052 Rev W


62. JAMECO CONTROL BOX

ECN CS-2479 83 J9044052 Rev W


Ref # Group Finish Offset Name of Part Stock Stock No. No. Drawing 1 Toggle Switch 113118 2 Humidity based fan control 113119 3 Receptacle cover 113120 4 Wire SO18/3 123120 5 Fork Terminal 170067 6 Ring Terminal 170068 7 3C Compact Splice 170069 8 5C Compact Splice 170070 9 2-Gang Lug Box 191549 10 Liquidtight Cord Grip 191550

ECN CS-2479 84 J9044052 Rev W


swinging hinged doors replacement parts...

Documents