switches, power fuses and loadbreaks interactive 2019.pdf · 2019. 3. 20. · two piece expendable...
TRANSCRIPT
DISTRIBUTION
SWITCHES, POWER FUSES AND LOADBREAKS
15 TO 46kV / 100 TO 900A
MINDCORETECH.COM
SWITCH IN...TO THE FUTURE
THE MINDCORE "EDGE"DISTRIBUTION HOOKSTICK SWITCH (DHS)
the next generation of distribution class hookstick switches. Our engineers have developed a modern switch that meets the needs for a versatile, light weight, reliable and economical method of distribution system isolation for utilities. The “DHS” is available in a 30 degrees inclined mounting position, with provision for surge arrester. In addition, the “DHS” can be cluster mounted for three phase applications on one bracket for quick install and compact configuration. The “DHS” is rated to 900A current capacity, 40kA momentary current. The “DHS” switch can be used in the system for isolating or sectionalizing for applications 15kV to 35kV.
IN-LINE DISCONNECT SWITCH (AIB)
a single phase, hookstick operated disconnect switch designed for in-line suspended applications. The “AIB” mechanically supports the full tension of the distribution line and provides high voltage insulation when open. When combined with a load break tool, it can be used to interrupt the full current load of the line on systems up to 34.5kV. A popular and economical solution to pole mounted switches, the “AIB” requires no additional support brackets and is ideally suited for armless construction. MindCore’s “AIB” is the only switch on the market with a design where mechanical connections do not simultaneously carry current
PRODUCT FEATURES
Cycloaliphatic epoxy insulatorsCopper current carrying partsSilver-to-Silver, self-wiping contactsLight weightHigh mechanical strengthExtra large “hooks” for easier “Loadbuster” tool engagementHigh pressure contact back-up springs and convex spring washersOperating eye with powerful mechanical “pry-out” actionPositive latching prohibits accidental opening
PRODUCT FEATURES
Twin parallel copper bladesCopper current carrying parts
Silver-to-Silver, self-wiping contactsImpact resistant polymer insulator
Standard machined terminal pads90° and 165° opening blade
Extra large “hooks” for easier “Loadbuster” tool engagementHigh pressure contact back-up springs and convex spring washers
Operating eye with powerful mechanical “pry-out” actionPositive latching prohibits accidental opening
Mechanical connections do not simultaneously carry current
FUSED IN-LINE HOOKSTICK CUTOUT SWITCH (CIF)
The “CIF” is developed to provide reliable overcurrent protection for primary distribution systems, safeguarding abnormal conditions such as line faults, line or equipment overloads, or equipment failure. Created for in-line suspended applications the “CIF’s” mounting arrangement mechanically supports the full tension of the distribution line. A popular and economical solution to pole mounted switches, the “CIF” requires no additional support brackets and is ideally suited for armless construction. When used in conjunction with a load break tool the “CIF” can be used to interrupt up to 200 without fuse blowing or arcing damage. The “CIF” may be used with any
universal distribution fuse link.
PRODUCT FEATURES
High strength composite fibreglass tubeCopper current carrying parts
Impact resistant polymer insulatorTwo piece expendable cap
Self locking hingesHigh pressure contact back-up springs and convex spring washers
Operating eye with powerful mechanical “pry-out” actionPositive latching prohibits accidental opening
High impact shock absorbing backup spring
BY-PASS HOOKSTICK SWITCH (CBP)
a compact, easily installed by-pass disconnect suitable for several applications. Ease of operation, safety of operating personnel,and it�s low cost are further advantages. The CBP provides a quickly operable line sectionalizing point with air gap insulation at each recloser or regulator installation. Break distance across the open gap of the by-pass switch is �full value� as compared to the 10 percent value supplied on the conventional regulator by-pass switch. No extra crossarms or special brackets are required for pole or crossarm mounting of the CBP.
PRODUCT FEATURES
Positive latching prohibits accidental openingHigh presure contact backup springsOperating eye with powerful mechanical pry-out actionTwin parallel copper blades90 degree blade openingNEMA terminal padsSelf wiping contact surfaces, hinge and jaw endsCycloaliphatic epoxy insulators
EXPULSION POWER FUSE (EPF)
a heavy duty power fuse offered in voltage ratings from 7.5 through 72.5 kV, in continuous ratings up to 400 A and interrupting capacities as high as 3 608 200 kVA symmetrical at 69 kV. This series of power fuses offers the maximum in reliability, ease of operation and economy. Reliability is assured by the dual operating characteristics of the expandable cap design and the arc quenching fuse element design. Ease of operation results from the drop out action of the fuse holder and the provisions for handling all ratings with a hook stick. Economy is significant at the time of the original installation and at the time of refusing. The cost of a fuse element is a fraction of the cost of refill units utilized by the competition with fuses of comparable performance.
PRODUCT FEATURES
Original Dominion Cutout Ltd. proven designBronze current carrying partsStandard machined terminal padsSilver-to-silver contactsFuse holder drops out for easy identification of blown fuseFuse link tube holder reusableMeets or exceeds NEMA requirements
(CDBFL)
(SYL)
MORE DISTRIBUTION PRODUCTS ARE AVAILABLE
2425 EDOUARD-MICHELIN | TERREBONNE | QUEBEC | CANADA | J6Y 4P2
+1 450.477.5959 | [email protected]