SX-4000 STANDALONE INTEGRATED MEDIA BLOCK™ WITH ENTERPRISE STORAGE / ENTERPRISE STORAGE PLUS

September 8, 2016

www.gdc-tech.comPowering your digital cinema experience

Hong Kong • Beijing • Shenzhen • Jakarta • Singapore • Tokyo • Los Angeles • Lima • Mexico City • São Paulo • Barcelona • Dubai • Mumbai

Install SX-4000 into the projector.3.

Ensure that the projector is powered off.

SX- 4000

The number of HDD will vary according to customer’s requirement.Subject to actual configuration. Please specify with our sales representatives.

Enterprise Storage Plus (Model Name: PSD-3000-U2+)

Enterprise Storage (Model Name: PSD-3000-U2)

HDD tray key X 1

AC FAN RAID

Enterprise Storage X 1

Power cord X 23.5” SATA HDD X 5* eSATA cable X 2

HDD tray key X 1

Tubular lock key X 1

Enterprise Storage X 1

Enterprise Storage Plus X 1

SX-4000 STANDALONE INTEGRATED MEDIA BLOCK™ WITH ENTERPRISE STORAGE / ENTERPRISE STORAGE PLUS

September 8, 2016

www.gdc-tech.comPowering your digital cinema experience

Hong Kong • Beijing • Shenzhen • Jakarta • Singapore • Tokyo • Los Angeles • Lima • Mexico City • São Paulo • Barcelona • Dubai • Mumbai

SMS version 10.0

1 2

4

3

5

AC FAN RAID

SX-4000*

Connect keyboard and mouse or touch panel control (TPC) to the USB connection of the SX-4000.

Connect the provided Cat-5e LAN cable from the SX-4000 Ethernet 2 port to the projector’s Ethernet port

SX-4000

SX-4000ENTERPRISE STORAGE AND ENTERPRISE STORAGE PLUS

SMS version 10.0

* 2*

This section provides a suggested installation configuration of GDC SX-4000 and Enterprise Storage/ Enterprise Storage Plus for reference. Please contact our salesrepresentatives to specify the accessory needed for the installation.

Remove the packaging from the box.

SX-4000

SX-4000

SX-4000

STEP 4 Installing Hard Disks into Enterprise Storage / Enterprise Storage Plus1. 2.3.

4.

Using the HDD tray key provided, turn the HDD tray lock to the “OPEN” position. Push the “OPEN/LOCK” icon to release the handle.Insert the HDD tray (with HDD installed) into an open slot on the Enterprise Storage / Enterprise Storage Plus. Push the tray handle to fully insert the HDD tray.Using the HDD tray key provided, turn the lock to “LOCK” position to lock the HDD tray to the Enterprise Storage / Enterprise Storage Plus.

STEP 6 Connecting Enterprise Storage / Enterprise Storage Plus drive bay to SX-4000

Take out the power cord(s) from the packaging and connect to the power connectorof Enterprise Storage / Enterprise Storage Plus. For Enterprise Storage Plus, please make sure that both power cords of the dual-redundant power supply are connected.Connect the eSATA cable(s) to the back of the Enterprise Storage / Enterprise Storage Plus for data transfer.For Enterprise Storage / Enterprise Storage Plus, insert the eSATA cable into the SX-4000 eSATA port 1. For Enterprise Storage Plus, connect another eSATA cablefrom “eSATA CRU” port on Enterprise Storage Plus to eSATA port 2 on the SX-4000.Power on the Enterprise Storage / Enterprise Storage Plus with the switch on frontpanel. Then power on the projector with SX-4000 before moving on to Step 7.

1.

2.

3.

4.

AC FAN RAID

eSATA CRU

PSU ATATUS

Please gently push the HDD tray when inserting to avoid damage to the component. Do not force the HDD tray into the housing if you think it is installed incorrectly. This may damage the Enterprise Storage / Enterprise Storage Plus.The HDD labels should be facing up and the connector should be facing down when installing the HDD onto the HDD tray.Do not take out the HDDs during operation.During operation, the temperature of the HDD may exceed 50°C. Please take care when handling hot drives.

1.

2.

3.

4.5.

STEP 5 Installing Enterprise Storage / Enterprise Storage Plus into the pedestal

Put the Enterprise Storage / Enterprise Storage Plus to the 19” pedestal / rack.Tighten four screws to fix the Enterprise Storage / Enterprise Storage Plus.

NOTE: Please insert Enterprise Storage / Enterprise Storage Plus into the highest position of the pedestal.

OR

AC FAN RAID

1 2

4

3

5

AC FAN RAID

STEP 7 Operating the SX-4000 with the Enterprise Storage / Enterprise Storage Plus

QS-0182-1609-V5E

You can now start to use the SX-4000 and Enterprise Storage / Enterprise Storage Plus by accessing the SMS interface.

For details, please refer to SX-4000 Standalone Intergrated Media Block™ user manual.

+34 928 912 295

+65 6100 4328

+52 55 8851 1198

Copyright © 2016 GDC Technology Limited. All rights reserved. All trademarks listed in this manual are properties of their respective owners. Specifications are subject to change without notice due to ongoing product development and improvement.