syllabus - rku.ac.in · lecture (l): 1 hour / week / semester, 2. practical (p): 2 hour / week /...
TRANSCRIPT
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 1
SCHOOL OF ENGINEERING PROGRAM : M.TECH – Construction Technology
ADMISSION YEAR - 2018-2020 SEMESTER – II
DEFINATION OF ONE CREDIT :
1. Lecture (L): 1 hour / week / semester, 2. Practical (P): 2 hour / week / semester3.
Tutorial(T): 2 hour / week / semester
TEACHING SCHEME
Course
Code Course Name
Teaching Hours Cre
dits
Audit
course
C
IE
PS
EE
Remarks
if any
Lect
ure
Tuto
rial
Practi
cal
CN211 Advanced Concrete
Technology 3 0 2 4 N Y Y
CN212 Repairs & Rehabilitation of
Structures 3 2 0 4 N Y N
CN213 Construction Planning and
Control 3 2 0 4 N Y N
Elective-III 3 2 0 4 N Y N
Elective-IV 3 2 0 4 N Y N
Total 15 8 2 20
Total Hours 25
List of Elective Subjects:
CN214 Construction Contracts & Specification
CN215
Energy Conservation Techniques In Building
Construction
CN218 Building Services
CN219 Application of Operation Research Techniques in
Construction
N- No CIE – Continuous internal evaluation
Y – Yes PSEE – Practical semester end examination including ITD, Dissertation, Industrial project, Industrial training etc..
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 2
Course Title ADVANCED CONCRETE TECHNOLOGY
Course Code CN211
Course Credit
Theory :03
Practical :02
Tutorial :00
Credits :04
Course Learning Outcomes:
Understand the physical and chemical properties of cement.
Understand the various properties of concrete.
Understand, Analyze and Evaluate the Concrete mix design.
Understand the various special concrete and its uses.
Detailed Syllabus
Sr.
No. Name of chapter & details
Hours
Allotted
SECTION-I
1. UNIT -1 Materials And Their Properties
Review of properties of cement, their physical and chemical properties, special
purpose cements, Classification and properties of aggregates, soundness of
aggregates, alkali aggregate reaction, thermal properties of aggregates, Importance
of shape and Surface area and grading, gap graded and aggregates. Admixtures &
construction chemicals, Use of Fly Ash, Silica Fumes, Metakaolin& GGBS in
concrete
Introduction to prestressed concrete.
11
2. UNIT -2 Properties of Concrete
Rheological behavior of concrete, requirements of workability of concrete,
Durability & Effect of environmental conditions, Strength & maturity of hardened
concrete, Impact, Dynamic and fatigue behaviour of concrete, shrinkage and creep
of concrete, behaviour of concrete under fire.
10
Total 21
SECTION-II
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 3
3. UNIT -3 Permeability and durability of concrete
Permeability and Durability of concrete, Parameters of durability of concrete,
chemical attack on concrete, Production of concrete; batching mixing,
transportation, placing, compaction of concrete. Special methods of concreting and
curing, Hot weather and cold weather concreting, Guniting (Shotcreting)
6
4. UNIT -4 Concrete Mix Design
Concrete mix design, Basic considerations and choice a mix proportions, various
methods of mix designs including IS Code method. Quality control and quality
assurance of concrete, Acceptance criteria, Quality management in concrete
construction, Inspection and testing of concrete. Non-destructive testing of
concrete, core test and load test.
7
5. UNIT -5 Special Concrete
Special concrete such as high strength, Lightweight, heavy weight, vacuum
processed concrete, Mass concrete, high performance concrete, Pumpable concrete,
Self-Compacting concrete, Air entrained concrete, Ferro cement, fiber reinforced
concrete, Polymer impregnated concrete. Jet concrete. Recycling & re-use of
industrial waste material. Deterioration and repair technology of concrete, Distress
and type of repairs, crack sealing techniques
8
Total 21
Instructional method and Pedagogy:
1. Lectures will be conducted with the aid of multi-media projector, black board, OHP etc.
2. Assignments based on course content will be given to the students at the end of each
unit/topic and will be evaluated at regular interval.
3. Surprise tests/Quizzes/Seminar will be conducted.
4. The course includes tutorials, where students have an opportunity to build an appreciation
for the concepts being taught in lectures.
Reference Books:
1. Neville, A.M., Properties of Concrete, Pearson Education Asia (P) Ltd, England, 2000.
2. Concrete Technology, Gambhir M.L, Tata McGraw Hill
3. Concrete Technology, Gambhir M.L, Tata McGraw Hill
4. Concrete Technology, M.S.Shetty, S.Chand& Company New Delhi
5. Concrete microstructure, properties & materials, P.KumarMehata, Paulo & J.M. Monteiro,
6. Light Weight Concrete, Short &Kenniburg, Asia Publishing House, Bombay
Additional Resources
https://onlinecourses.nptel.ac.in/noc16_ce10/preview
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 4
Course Title REPAIRS AND REHABILITATION OF STRUCTURES
Course Code CN212
Course Credit
Theory :03
Practical :00
Tutorial :00
Credits :03
Course Learning Outcomes:
Understand the importance of Repair Strategies
Understand the Serviceability and Durability of concrete
Summarize the various techniques for repairs
Understand the demolition techniques.
Detailed Syllabus
Sr.
No. Name of chapter & details
Hours
Allotted
SECTION-I
1. MAINTENANCE AND REPAIR STRATEGIES
Maintenance, repair and rehabilitation, Facets of Maintenance, importance of
Maintenance various aspects of Inspection, Assessment procedure for evaluating
damaged structure, causes of deterioration.
Introduction to evaluation of structure.
10
2. SERVICEABILITY AND DURABILITY OF CONCRETE
Quality assurance for concrete construction concrete properties – strength,
permeability, thermal properties and cracking. – Effects due to climate,
temperature, chemicals, corrosion – design and construction errors – Effects of
cover thickness and cracking
11
Total 21
SECTION-II
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 5
3. MATERIALS AND TECHNIQUES FOR REPAIR
Special concretes and mortar, concrete chemicals, special elements for accelerated
strength gain, Expansive cement, polymer concrete, sulphur infiltrated concrete,
ferro cement, Fibre reinforced concrete. Rust eliminators and polymers coating for
rebars during repair, foamed concrete, mortar and dry pack, vacuum concrete,
GuniteandShotcrete, Epoxy injection, Mortar repair for cracks, shoring and
underpinning. Methods of corrosion protection, corrosion inhibitors, corrosion
resistant steels, coating and cathodic protection.
10
4. REPAIRS, REHABILITATION AND RETROFITTING OF STRUCTURES
Repairs to overcome low member strength, Deflection, Cracking, Chemical
disruption, weathering corrosion, wear, fire, leakage and marine exposure. 6
5. DEMOLITION TECHNIQUES
Engineered demolition techniques for Dilapildated structures – case studies 5
Total 21
Instructional method and Pedagogy:
1. Lectures will be conducted with the aid of multi-media projector, black board, OHP etc.
2. Assignments based on course content will be given to the students at the end of each
unit/topic and will be evaluated at regular interval.
3. Surprise tests/Quizzes/Seminar will be conducted.
4. The course includes tutorials, where students have an opportunity to build an appreciation
for the concepts being taught in lectures.
Reference Books:
1. Neville, A.M., Properties of Concrete, Pearson Education Asia (P) Ltd, England, 2000.
2. Mehta, P.K and Montevic. P.J., Concrete- Microstructure, Properties and Materials, ICI, 1997.
3. Vedhikizen Van Zanten, R., (Ed), Gerotextiles and Geomembranes in Civil Engineering.
4. Koerner, R.M., Construction and Geotechnical Methods in Foundation Engineering, McGraw Hill
Co., 1985.
5. Rosen, H.J., Construction Materials for Architecture, John Wiley, 1985.
6. Flinn, R.A and Trojan, P.K., Engineering Materials and their Applications, Jaico Publications
House, Delhi, 1999.
7. NawyE , Fundamentals of High Performance Concrete, Second Edition, John Wiley & Sons, New
York, 2001.
Additional Resources
http://fmcet.in/CIVIL/CE2071_uw.pdf
http://cpwd.gov.in/Units/handbook.pdf
http://civildigital.com/techniques-rehabilitation-repair-structures/
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 6
Course Title CONSTRUCTION PLANNING AND CONTROL
Course Code CN213
Course Credit
Theory :03
Practical :00
Tutorial :02
Credits :04
Course Learning Outcomes:
Understand the importance and principles of Project Management.
Understand the Various level managerial functions and its authorities,.
Summarize the construction project planning.
Understand, Analyze and evaluate the cost control and pricing for construction
projects.
Detailed Syllabus
Sr.
No. Name of chapter & details
Hours
Allotted
SECTION-I
1. UNIT -1
Understanding Project Management, Project manager, organization structures,
organizing and staffing the project office and team. 6
2. UNIT -2
Management functions – directing, controlling, project authority, interpersonal
influences, barriers, team building, communication, time management, conflicts 7
3. UNIT -3
Construction Planning : Project planning, milestone schedules, WBS, Network
techniques, CPM , PERT and Prima Vera , Resources leveling and smoothing 8
Total 21
SECTION-II
4. UNIT -4
Pricing and Estimating: Budget preparation, estimation of labour, material,
equipment and overhead cost, Actual cost recording and reviewing. 10
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 7
5. UNIT -5
Cost Control : Understanding control, operating cycles, cost account codes, Job
cost report, Projected Cost Estimates, status reporting, variance and earned value
Project Management Information system: MIS reporting, Daily, Weekly and
monthly reporting, Actual vs. Planned cost reports, Planning & Cost control
document. Quality and safety documentation site
11
Total 21
Instructional method and Pedagogy:
1. Lectures will be conducted with the aid of multi-media projector, black board, OHP etc.
2. Assignments based on course content will be given to the students at the end of each
unit/topic and will be evaluated at regular interval.
3. Surprise tests/Quizzes/Seminar will be conducted.
4. The course includes tutorials, where students have an opportunity to build an appreciation
for the concepts being taught in lectures.
Reference Books:
1. Project Management, Harold Kerzner, CBS Publisers& Distributors, 2nd Edition.
2. Modern Construction Management, Frank Harris & Ronald McCaffer, Blackwell science.
3. Project Management, Harold Kerzner, CBS Publisers& Distributors, 2nd Edition.
4. Modern Construction Management, Frank Harris & Ronald McCaffer, Blackwell science.
5. Principles of Construction Management, Roy Pilcher, McGraw Hill London.
Additional Resources
http://nptel.ac.in/courses/105103093/
https://onlinecourses.nptel.ac.in/noc16_ce02/preview
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 8
Course Title CONSTRUCTION CONTRACTS & SPECIFICATION
Course Code CN214
Course Credit
Theory :03
Practical :00
Tutorial :00
Credits :03
Course Learning Outcomes:
After Successful completion of the above course, students will be able to:
Understand and evaluating the project cost estimation.
Understand the biding and legal issues in contracting,
Understand the Tendering and contractual procedures,
UnderstandClaims and disputes.
Detailed Syllabus
Sr.
No. Name of chapter & details
Hours
Allotted
SECTION-I
1. UNIT -1
1. Project cost estimation (a) Approximate Estimate andadministrative approval
and expenditure sanction.
2. Project cost estimation (b) Detailed Estimate.
3. Rate analysis (a) standard methods as followed by
Government organizations for tendering purposes.
4. Rate analysis (b) as followed by contractor organizations forbidding Purposes.
10
2. UNIT -2
Owner's and contractor's estimate, Overhead charges - Internationally adopted
formulae, Pre-qualification of bidders, Definition of Contract Legal issues in
contract –IndiancontractAct.Types of contracts, Documents forming a contract.
11
Total 21
SECTION-II
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 9
3. UNIT -3
Introduction to specification of various construction work
Tendering and contractual procedures - Technical sanction, Notice inviting tender.
Multiple bids, Evaluation of bids, Pre-requisites in an agreement, various types of
bonds, etc.
8
4. UNIT -4
General conditions of Indian (domestic) contracts: Their background and
administration. General conditions of International contracts (FIDIC, etc.): How
different from Indian (domestic) contracts.
8
5. UNIT -5
Claims and disputes, Dispute resolution techniques, Negotiation. 5
Total 21
Instructional method and Pedagogy:
1. Lectures will be conducted with the aid of multi-media projector, black board, OHP etc.
2. Assignments based on course content will be given to the students at the end of each
unit/topic and will be evaluated at regular interval.
3. Surprise tests/Quizzes/Seminar will be conducted.
4. The course includes tutorials, where students have an opportunity to build an appreciation
for the concepts being taught in lectures.
Reference Books:
1.Contract Management & Dispute Resolutions , S. Ranaga Rao, Engineering staff College of India
Additional Resources
http://nptel.ac.in/courses/105103093/12
http://www.nptel.ac.in/syllabus/105102013/
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 10
Course Title ENERGY CONSERVATION TECHNIQUES IN
BUILDING CONSTRUCTION
Course Code CN215
Course Credit
Theory :03
Practical :00
Tutorial :00
Credits :03
Course Learning Outcomes:
After Successful completion of the above course, students will be able to:
Understand the Fundamentals of Energy,
Understand the Energy and Resource Conservation,
Summarize the Energy in Building Planning,
Understand, Analyze and evaluate the Energy Management.
Detailed Syllabus
Sr.
No. Name of chapter & details
Hours
Allotted
SECTION-I
1. UNIT -1
Introduction: Fundamentals of energy - Energy Production Systems - Heating,
Ventilating and air conditioning -Solar Energy and Conservation - Energy
Economic Analysis - Energy conservation and audits -Domestic energy
consumption - savings -Energy use in buildings - Residential - commercial
buildings. Green building concepts.
7
2. UNIT -2
Environmental: Energy and Resource conservation - Design of green buildings -
Evaluation tools for building energy - Embodied and operating energy - Peak
demand - Comfort and Indoor air quality - Visual and acoustical quality - Land,
water and materials - Airborne emissions and waste management.
7
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 11
3. UNIT -3
Design: Natural building design consideration - Energy efficient design strategies -
Contextual factors - Longevity and process Assessment -Renewable energy sources
and design- Advanced building Technologies - Smart buildings - Economies and
cost analysis.
7
Total 21
SECTION-II
4. UNIT -4
Services: Energy in building design - Energy efficient and environment friendly
building - Thermal phenomena - thermal comfort - Indoor Air quality - Climate,
sun and Solar radiations -Psychometrics - passive heating and cooling systems -
Energy Analysis -Active HVAC systems -Preliminary Investigation - Goals and
policies - Energy audit - Types of energy audit - Analysis of results - Energy flow
diagram - Energy consumption/ Unit production - Identification of wastage -
Priority of conservative measures - Maintenance of management programme.
09
5. UNIT -5
Energy Management: Energy management of electrical equipment - Improvement
of power factor - management of maximum demand - Energy savings in pumps -
Fans - Compressed air systems - Energy savings in Lighting systems – Air
conditioning systems - Applications.
9
6 Introduction: introduction to green building ,construction techniques and uses
with property 03
Total 21
Instructional method and Pedagogy:
Lectures will be conducted with the aid of multi-media projector, black board, OHP etc.
Assignments based on course content will be given to the students at the end of each
unit/topic and will be evaluated at regular interval.
Surprise tests/Quizzes/Seminar will be conducted.
The course includes tutorials, where students have an opportunity to build an appreciation for
the concepts being taught in lectures.
Reference Books:
1. .Contract Management & Dispute Resolutions , S. Ranaga Rao, Engineering staff College of India
Additional Resources
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 12
http://www.lrc.ky.gov/lrcpubs/rm503.pdf
http://nptel.ac.in/courses/105102088/2
Course Title BUILDING SERVICES
Course Code CN218
Course Credit
Theory :03
Practical :00
Tutorial :00
Credits :03
Course Learning Outcomes:
Understand the importance and principles of building services .
Develop skills to evaluate types of services required for various structures.
Summarize the principles of various important design aspects.
Understand, Analyze and Evaluate the performance of different services provide.
Detailed Syllabus
Sr.
No. Name of chapter & details
Hours
Allotted
SECTION-I
1. UNIT 1 Brief Planning of building services, Brief water supply and distribution Importance
of building services for multi-storey buildings and its application. Various types of
services provided in multi story building.
10
2. UNIT 2 Pumping and piping, classification and function of pumps, Pipe sizing for water
supply, sanitation drainage, sewage disposal and storm water drainage and
swimming pool for a multi-storey buildings.
11
Total 21
SECTION-II
SYLLABUS
2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH) Page 13
3. UNIT 3 Heating, Ventilating and Air conditioning System and services, Lighting design,
Elevators and escalators, Electrical distribution.
11
6. UNIT 4 Fire fighting services, fire safety, security and access control services, Design of
Car Parking systems.
10
Total 21
Instructional method and Pedagogy:
1. Lectures will be conducted with the aid of multi-media projector, black board, OHP etc.
2. Assignments based on course content will be given to the students at the end of each
unit/topic and will be evaluated at regular interval.
3. Surprise tests/Quizzes/Seminar will be conducted.
4. The course includes tutorials, where students have an opportunity to build an appreciation
for the concepts being taught in lectures.
Reference Books:
1. National Building Code 2005, Part 0-10 , Bureau of Indian Standards
2. Building Services Handbook: Incorporating Current Building and Construction Regulations, F.
Hall (Author), Roger Greeno (Author)
3. Building Services Materials Handbook - Heating, Sanitation and Fire, Building Services Research
and Development Association Staff, Routledge
4.Energy economics and building design, Willan T. Mayer
5. Hand book of Designing and Installation of services in high rise building complexes, Third Edition
,2010 , Er. V.K. Jain.
Additional Resources
http://www.arca53.dsl.pipex.com/
https://barch5a.wordpress.com/building-services-ii-2/
https://www.scribd.com/doc/55417572/Building-Services-Notes