system display and controller - outbackpower.com · mate (continued) 900-0131-01-00 rev a.vsd\mate...

$: System Display and Controller - outbackpower.com · MATE (continued) 900-0131-01-00 Rev A.vsd\MATE ADV Setup 3\2012-03-21 Menu$
System Display and Controller

Contents

Basic Navigation…………………………………………………..…... 2

Menu Maps -MATE System Display and Controller Basic Setup……………. 2MATE System Display and Controller Advanced Setup………. 3MATE System Display and Controller AGS Menu………….. 4-5Inverter Setup…………………………………………………….. 6-7Charge Controller Setup………………………………………… 8FLEXnet DC Setup………………………………………………. 9-10

900-0131-01-00 Rev A.vsd\TOC\2012-03-21©2012 OutBack Power Technologies. All Rights Reserved.

WARNING: SHOCK HAZARD

Consult the MATE Owner’s Manual for detailed information on safety and installation procedures.

900-0131-01-00 Rev A.vsd\Menu Map Basics\2012-03-21©2012 OutBack Power Technologies. All Rights Reserved. Page 1

BA

SIC

NA

VIG

ATI

ON

The following pages are intended as a quick reference guide for the menu map of the MATE Series System Display and Controller. This document is for use with the products MATE and MATE2. It cannot be used with the MATE3.

See the MATE Series Owner’s Manual for detailed information about the menu structure, MATE features, and hot/soft key functions. See the inverter, charge controller, and DC monitor manuals for detailed information about specific features and functions that are controlled by the menus.

------------------choose device:

FX MATE

Selection from Main Menu

Device Selection Menu

SETUP/FX----------------choose categoryDevice Menu Title(s)

SETUP/FX/SEARCH------P016

DOWN INC DEC PORT

Menu Item

SETUP/FX/SEARCH------P01searchsensitivityDOWN INC DEC PORT

Setpoint or function for the Menu Item

SETUP/FX/SEARCH------search 6sensitivityDOWN INC DEC PORT

Port

MAIN--------------------3:02:14P

SUM STATUS SETUP ADV

Main Screen

Main MenuSoft Keys

To cycle through the devices connected to the HUB, press the <PORT> soft key.

Select this option to proceed

Available menus

Adjusts the set points value

Switches between devices on the ports of the Communications HUB

Soft Key Color Code:

Navigation colors

Selects a function (e.g., ON, OFF, AUTO)

Soft key functions will vary depending on the selected menu and are defined by the word above the key in the LCD.

MAIN-------------------3:02:14P


To return to the Main screen at any time:

Press and hold the 2 left soft keys at the same time. Release when the Main screen appears.

If accompanied by a dashed line, pressing that soft key will return the user to the location identified by the dashed line. This will vary depending on the devices in the system.

Indicates a 1-screen movement within a Menu. These are color coded according to their function or purpose.

Navigation:

Soft Keys

Soft Keys

LCD Screen

LCD Screen

INV Hot Key

AC IN Hot Key

AC IN Hot Key

INV LED

INV Hot Key

INV LED

AC IN LED

900-0131-01-00 Rev A.vsd\MATE Basic Setup\2012-03-21©2012 OutBack Power Technologies. All Rights Reserved. Page 2

(C)2009OutBack

PowerSystems

VersionCode a.a.aSerial #xxxxxxxxScreen EE b.bb

Searching for Devices

FX Found


CC Found


DC Found

Port Assignment1> FX 2>CC 3> DC 4>5> 6> 7> 8>9> 10> 2M>


HUB Found

SETUP/MATE/PAGE1-------mate code rev: 4.1.3choose category:CLOCK CNT GLOW PG2

Current DayTu 01/01/09

INC SETDAY MONTH

Current MonthTu 01/01/09

INC SETMONTH DATE

Current DateTu 01/01/09

INC SETDATE YEAR

Current YearTu 01/01/09

INC DECYEAR YEAR DONE

Current Minute12:00:00P

INC DEC RESETMIN MIN SEC DONE

Current Hour12:00:00P

INC SETHOUR MIN

SETUP/MATE/CNT-------contrast 30%

BACK INC DEC

SETUP/MATE/GLOW-------backlight controls

BACK LEVEL MODE TIME

SETUP/MATE/GLOW/LEVELbacklight 100%

BACK INC DEC

SETUP/MATE/GLOW/MODEcurrent code: AUTO

BACK OFF AUTO ON

SETUP/MATE/GLOW/TIMEglow Off 5 minstimeBACK INC DEC

SETUP/MATE/CLOCK-------Tu 1/01/09

12:00:00PBACK DATE TIME

SETUP/MATE/SUM-------summary control

BACK TYPE DELAY ROLL

SETUP/MATE/SUM/TYPE----summary screen typeBACK INC DEC

SETUP/MATE/SUM/DELAY-Sum screen 19 minsDelay timeBACK INC DEC

SETUP/MATE/SUM/DELAY-Sum screen 10 secondsRoll rateBACK INC DEC

SETUP/MATE/COMM/PC------PC communications: OFF

BACK OFF ON

SETUP/MATE/COMM--------Comm errors:

BACK VIEW RSET

00:000 01:000 02:00003:000 04:000 05:00006:000 07:000 08:00009:000 10:000 2M:000

After Resetting Comm Errors

SETUP/MATE/PAGE2-------choose category:

PG1 SUMRY COMM PG3

SETUP/MATE/PAGE3-------choose category:

PG2 BEEP MAIN

SETUP/MATE/COMM--------Choose category:

BACK REPOLL PC DEBUG

00:000 01:000 02:00003:000 04:025 05:00106:001 07:001 08:00109:001 10:001 2M:001

Viewing Comm Errors

11

2

3

4

5

6

Setting up the MATE or MATE2 includes:1. Setting the Clock (date and time)2. Setting the screen contrast.3. Setting the Glow time.4. Setting how the Summary screens are

displayed.5. Setting communication options.6. Setting Beep tone functions.

Setpoints:NoneRoll: rotates between devicesFX OnlyCC OnlyDC OnlyDC Simple

1

Main ScreenMAIN----------------

3:02:14P


Setpoints (Current Day):Monday through Sunday

Setpoints (Current Month):01 through 12

Setpoints (Current Date):01 through 31

Setpoints (Current Year):09 through xx

Setpoints (Current Hour):01-12AM or 01-12PM

Setpoints (Reset Sec):Resets seconds to 00

1

2

3

4

5

6

Varies depending on attached devices. Automatically returns

to the Main Screen.

Repolling

SETUP------------------choose device:

FX MATE

MAIN--------------------3:02:14P


Main Screen

Startup ScreensMAIN----------------

3:02:14P




Port Assignment1> FX 2>CC 3> DC 4>5> 6> 7> 8>9> 10> 2M>


HUB Found

SETUP/MATE/BEEP--------button beep tone ON

BACK OFF ON

MA

TE

AC IN INV

MAIN----------------3:02:14P


G'day Mate

MA

TE

(continued)

900-0131-01-00 Rev A.vsd\MATE ADV Setup\2012-03-21©2012 OutBack Power Technologies. All Rights Reserved. Page 3

Accessing the Advanced Menu:

ADV--------------------choose device

FX CC DC MATE

Changing more detailed operating parameters requires access to the

Advanced Setup Menu.

ADV/MATE/HBX------------hbx-use 24.0 Vdcgrid set pointDOWN ADV INC DEC

ADV/MATE/HBX------------hbx-use 1.0 hrsgrid delayDOWN UP INC DEC

ADV/MATE/HBX------------hbx-drop 26.0 Vdcgrid set pointDOWN UP INC DEC

ADV/MATE/HBX------------hbx-drop 1.0 hrsgrid delayDOWN UP INC DEC

ADV/MATE/HBX------------ac input USEcontrolDOWN UP CHANGE

ADV/MATE/HBXend of hbx menu

UP TOP ADV

ADV/MATE/GRIDUSE--------griduse enable: OFF

DOWN ADV OFF ON

ADV/MATE/GRIDUSEend of griduse menu

UP TOP ADV

ADV/MATE/HBX------------ac input USEcontrolDROP USE HBX DONE

ADV/MATE/PAGE1choose category

HBX GRIDUSE AGS PG2

ADV/MATE/PAGE3------------advanced chargerfloat control

PG2 CC FN-DC PG4

ADV/MATE/PG3/CC-----------enable CC floatcoordination: Yes

PG3 YES NO ADV

ADV/MATE/PG3/FN-DC--------enable FN-DC chargetermination: YesPG3 YES NO ADV

ADV/MATE/PAGE2----------choose category:

PG1 DEFAULTS PG3

ADV/MATE/DEFAULT----------reset MATE to factory defaultRESET NO

Page 1 Page 2 Page 3

Page 4

MAIN--------------------3:02:14P


Charge Controller and FLEXnet DC Menus

Resetting the MATE2 to Factory Defaults

1

1 The AGS Menu is shown on the next page….

ADV/MATE/DEFAULT----------Are you sure?

YES NO

ADV/MATE/GRIDUSE--------weekday 12:00Agriduse start timeDOWN UP CHANGE

ADV/MATE/GRIDUSE--------weekday 12:00Agriduse stop timeDOWN UP CHANGE

ADV/MATE/GRIDUSE--------weekend 12:00Agriduse start timeDOWN UP CHANGE

ADV/MATE/GRIDUSE--------weekend 12:00Agriduse stop timeDOWN UP CHANGE

WEEKDAY GRIDUSE STARTadj hour 12:00A

DOWN INC DEC

WEEKDAY GRIDUSE STARTadj min 12:00A

INC DEC DONE

WEEKDAY GRIDUSE STOPadj hour 12:00A

DOWN INC DEC

WEEKDAY GRIDUSE STOPadj min 12:00A

INC DEC DONE

WEEKEND GRIDUSE STARTadj hour 12:00A

DOWN INC DEC

WEEKEND GRIDUSE STARTadj min 12:00A

INC DEC DONE

WEEKEND GRIDUSE STOPadj hour 12:00A

DOWN INC DEC

WEEKEND GRIDUSE STOPadj min 12:00A

INC DEC DONE

ADV/MATE/PG4-------------FN-DC advanced gridtie authorityPG3 MODE ADV MAIN

ADV/MATE/AGS/PG4/MODE--FN-DC enable

disabledPG4 IN DEC ADV

MAIN--------------------3:02:14P


ADV/SETTINGS/WARNINGchanges made could adversely affect

system performance

ADV/PASSOWRD------------Enter the password

132ENTER INC DEC EXIT



A 1. Press the <INC> soft key until “141” is displayed on the LCD.

2. Press the <ENTER> soft key to accept the password and move forward to the Device Selection Menu.

A

B

B

MAIN-------------------3:02:14P




MA

TE

(continued)

900-0131-01-00 Rev A.vsd\MATE ADV Setup 2\2012-03-21©2012 OutBack Power Technologies. All Rights Reserved. Page 4

ADV/MATE/AGS/SETUP------ags enabled: No

DOWN UP NO YES

ADV/MATE/AGS/SETUP------ags control: MAN-OFF

DOWN UP CHANGE

ADV/MATE/AGS/SETP-------dc genset: No

DOWN UP NO YES

ADV/MATE/AGS/SETUP------Vdc genstop 38.0 Vdc

DOWN UP INC DEC

ADV/MATE/AGS/SETUP------ags fault time 17

minutesDOWN UP INC DEC

ADV/MATE/AGS/SETUP------cool down time 0


ADV/MATE/AGS/SETUP------warm up time 0


ADV/MATE/AGS/SETP-------end of AGS Setup

menuUP TOP AGS


HBX GRIDUSE AGS PG2

ADV/MATE/AGS------------choose category:

QUIET VOLTSETUP TIME START PG2

ADV/MATE/AGS/QUIETTIME--weekday 12:00Aquiet time startDOWN UP CHANGE

ADV/MATE/AGS/QUIETTIME--weekday 12:00Aquiet time stopDOWN UP CHANGE

ADV/MATE/AGS/QUIETTIME--weekend 12:00Aquiet time startDOWN UP CHANGE

ADV/MATE/AGS/QUIETTIME--weekend 12:00Aquiet time stopDOWN UP CHANGE

ADV/MATE/AGE/QUIETTIME--end of quiet time

menuUP TOP AGS

ADV/MATE/AGS/VSTART-----volt start 24.4 Vdc24 hr settingDOWN AGS INC DEC

ADV/MATE/AGS/VSTART-----volt start 23.6 Vdc2 hr settingDOWN UP INC DEC

ADV/MATE/AGS/VSTART-----volt start 22.0 Vdc2 min settingDOWN UP INC DEC

ADV/MATE/AGE/QTend of VOLTAGE

START menuUP TOP AGS

GEN START CONTROLcurrently: MAN-OFF

OFF AUTO ON OK

WEEKDAY QT STARTadj hour 12:00A

DOWN INC DEC

WEEKDAY QT STARTadj min 12:00A

INC DEC DONE

WEEKDAY QT STOPadj hour 12:00A

DOWN INC DEC

WEEKDAY QT STOPadj min 12:00A

INC DEC DONE

WEEKEND QT STARTadj hour 12:00A

DOWN INC DEC

WEEKEND QT STARTadj min 12:00A

INC DEC DONE

WEEKEND QT STOPadj hour 12:00A

DOWN INC DEC

ADV/MATE/AGS/SETUP------ags port: 1

DOWN AGS INC DEC

WEEKEND QT STOPadj min 12:00A

INC DEC DONE

Continued on the next page...

MAIN-------------------3:02:14P




MA

TE

(continued)

900-0131-01-00 Rev A.vsd\MATE ADV Setup 3\2012-03-21©2012 OutBack Power Technologies. All Rights Reserved. Page 5

Advanced Setup Menu

(Continued)

ADV/MATE/AGS/LS---------load start 0 kw

DOWN AGS INC DEC

ADV/MATE/AGS/LS---------load start 1 mindelayDOWN UP INC DEC

ADV/MATE/AGE/LSend of LOAD START menuUP TOP AGS

ADV/MATE/AGS/LS---------load stop 0 kw

DOWN UP INC DEC

ADV/MATE/AGS/PAGE2---------choose category

LOAD MUSTPG1 START RUN PG3

ADV/MATE/AGS/MR---------weekday 12:00 Amust run start timeDOWN AGS CHANGE

ADV/MATE/AGS/MR---------weekday 12:00 Amust run stop timeDOWN UP CHANGE

ADV/MATE/AGE/MRend of MUST RUN menuUP TOP AGS

ADV/MATE/AGS/MR---------weekend 12:00 Amust run start timeDOWN UP CHANGE

ADV/MATE/AGS/MR---------weekend 12:00 Amust run stop timeDOWN UP CHANGE

ADV/MATE/AGS/LS---------load stop 1 mindelayDOWN UP INC DEC

WEEKDAY MR STARTadj hour 12:00A

DOWN INC DEC

WEEKDAY MR STOPadj hour 12:00A

DOWN INC DEC

WEEKEND MR STARTadj hour 12:00A

DOWN INC DEC

WEEKEND MR STOPadj hour 12:00A

DOWN INC DEC

WEEKEND MR STARTadj min 12:00A

INC DEC DONE

WEEKEND MR STOPadj min 12:00A

INC DEC DONE

WEEKDAY MR STARTadj min 12:00A

INC DEC DONE

WEEKDAY MR STOPadj min 12:00A

INC DEC DONEADV/MATE/AGS/%SOC-------

end of %SOC START MenuUP TOP AGS

ADV/MATE/AGS/PAGE3------choose category

%socPG2 START TIMERS PG4

ADV/MATE/AGS/TIMERS-----ags state 0

DOWN AGS

ADV/MATE/AGS/TIMERS-----agsgenfault 0

DOWN UP

ADV/MATE/AGS/TIMERS-----24 hr 1440 minvs timeDOWN UP

ADV/MATE/AGS/TIMERS-----2 hr vs time 120 min

DOWN UP

ADV/MATE/AGS/TIMERS-----2 min 2 minvs timeDOWN UP

ADV/MATE/AGS/TIMERS-----lsstart timer 0 min

DOWN UP

ADV/MATE/AGS/TIMERS-----lsstop timer 0 min

DOWN UP

ADV/MATE/AGS/PAGE4------choose category:

PG3 EXERCISE ADV

ADV/MATE/AGS/EX---------ex start day ---

DOWN AGS INC DEC

ADV/MATE/AGS/EX---------ex start time 12:00A

DOWN UP INC DEC

ADV/MATE/AGS/EX---------ex period 15 min

DOWN UP INC DEC

ADV/MATE/AGS/%SOC----------%SOC start 0%

DOWN AGS INC DEC

ADV/MATE/AGS/%SOC-------%SOC stop 90%

DOWN UP INC DEC

ADV/MATE/AGS/FULLCHG---charge to 100% fullevery 15 daysDOWN UP INC DEC

ADV/MATE/AGS/TIMERS-----exstop timer 0 min

DOWN UP

ADV/MATE/AGS/ES---------end of

exercise MenuUP TOP AGS

ADV/MATE/AGS------------choose category:

QUIET VOLTSETUP TIME START PG2


HBX GRIDUSE AGS PG2

Continued from the previous page.

ADV/MATE/AGS/TIMERS-----Vdcstop timer 0 min

DOWN UP

ADV/MATE/AGS/TIMERS-----end of TIMERS

MenuUP TOP AGS

MAIN-------------------3:02:14P




INVE

RTE

R

900-0131-01-00 Rev A.vsd\INV Setup\2012-03-21©2012 OutBack Power Technologies. All Rights Reserved. Page 6

Setting up the basic Inverter functions includes:1. Selecting the AC input (Grid or Gen).2. Setting the Search function.

SETUP/FX/INPUTAc1/grid 60.0 aaclimitDOWN INC DEC PORT

SETUP/FX/SEARCH------P01search 6sensitivityDOWN INC DEC PORT

SETUP/FX/SEARCH------P01search 8 cyclespulse lengthDOWN INC DEC PORT

SETUP/FX/SEARCH------P01search 60 cyclespulse spacingDOWN INC DEC PORT

SETUP/FX----------------choose category

SRCH INPUT

SETUP------------------choose device:

FX MATE

MAIN--------------------3:02:14P


SETUP/FX/SEARCH---------search setup completed

TOP SETUP MAIN

ADV/FX/PAGE1choose category

ADV INV CHRG PG2

ADV/FX/INVERTER------P01press button 2

DoneEXIT 1 2


ReadyEXIT 1 2


ReadyEXIT 1 2

ADV/FX/INVERTER------P01choose fx portthen press nextEXIT PORT NEXT

ADV/FX/INVERTER---------reset FX to factorydefaultsDOWN MORE

ADV/FX/INVERTER---------inverter programming completed

TOP ADV MAIN

ADV/FX/CHARGER-------P01charger 12.0AaclimitDOWN INC DEC PORT

ADV/FX/CHARGER-------P01charger 12.0 AaclimitDOWN INC DEC PORT

ADV/FX/CHARGER-------P01absorb 28.8 Vdcset pointDOWN INC DEC PORT

ADV/FX/CHARGER-------P01absorb 1.0 hrstime limitDOWN INC DEC PORT

ADV/FX/CHARGER-------P01float 27.2 Vdcset pointDOWN INC DEC PORT

Continued on next page….

NOTE: The values shown in this illustration will vary depending on the model of inverter.

Setpoints:GridGenerator

1

ADV/FX/INVERTER-----P01search 6sensitivityDOWN INC DEC PORT

ADV/FX/INVERTER-----P01search 8pulse lengthDOWN INC DEC PORT

ADV/FX/INVERTER-----P01search 8 cyclespulse lengthDOWN INC DEC PORT

ADV/FX/INVERTER------P01search 60 cyclespulse spacingDOWN INC DEC PORT

ADV/FX/INVERTER------P01low battery 21.0 Vdccutout set pointDOWN INC DEC PORT

ADV/FX/INVERTER------P01low battery 25.0 Vdccutin set pointDOWN INC DEC PORT

ADV/FX/CHARGER-------P01float 1.0 hrstime limitDOWN INC DEC PORT

ADV/FX/CHARGER-------P01equalize 1.0 hrstime limitDOWN INC DEC PORT

ADV/FX/CHARGER-------P01equalize 28.8 Vdcset pointDOWN INC DEC PORT

ADV/FX/CHARGER-------P01charger programming

completedTOP ADV MAIN

Main Screen

ADV/FX/INVERTER------P01adjust 120 Vacoutput voltageDOWN INC DEC PORT



FX CC DC MATE

Changing more detailed operating parameters requires access to the Advanced Setup Menu.

MAIN--------------------3:02:14P


Main Screen

Advanced Menu for Inverter (Page 1 of 3)

ADV/FX/CHARGER-------P01refloat 25.0 Vdcset pointDOWN INC DEC PORT

Resetting the Inverter to Factory Defaults

SETUP/FX/INPUT-------P01ac transfer controlDOWN GRID GEN PORT

1

SETUP/FX/INPUTAc2/gen 30.0 aaclimitDOWN INC DEC PORT

SETUP/FX/INPUT---------Input setup completed

TOP SETUP MAIN

MAIN--------------------3:02:14P



system performance







A

B

B


MAIN-------------------3:02:14P



INVE

RTE

R

(continued)

900-0131-01-00 Rev A.vsd\INV Setup 2\2012-03-21©2012 OutBack Power Technologies. All Rights Reserved. Page 7

ADV/FX/PAGE2--------P01choose category

ADV GRID GEN PG3

ADV/FX/GRID---------P01ac 1/grid 108 Vac lower limitDOWN INC DEC PORT

ADV/FX/GRID---------P01ac 1/grid 140 Vacupper limitDOWN INC DEC PORT

ADV/FX/GRID---------P01ac 1/grid 48.0 Aacinput limitDOWN INC DEC PORT

ADV/FX/GRID---------P01ac 1/grid 6 cyclestransfer delayDOWN INC DEC PORT

ADV/FX/GRID---------P01grid programming


ADV/FX/GEN----------P01gen input 00.5 minconnect delayDOWN INC DEC PORT

ADV/FX/GEN----------P01ac 2/gen 108 Vaclower limitDOWN INC DEC PORT

ADV/FX/GEN----------P01ac 2/gen 140.0 Aacupper limitDOWN INC DEC PORT

ADV/FX/GEN----------P01ac 2/gen 48.0 Aacinput limitDOWN INC DEC PORT

ADV/FX/GEN----------P01ac 2/gen ONsupportDOWN INC DEC PORT

ADV/FX/GEN----------P01ac 2/gen 60cycles transfer delayDOWN INC DEC PORT

ADV/FX/GEN----------P01gen programming


ADV/FX/PAGE4---------P01choose category

PG3 SELL CAL MAIN

ADV/FX/SELL----------P01sell re 23.6 VdcvoltsDOWN INC DEC PORT

ADV/FX/SELL----------P01grid tie IEEEwindowDOWN IEEE USER PORT

ADV/FX/SELL----------P01selling

setup completedTOP ADV MAIN

ADV/FX/SELL----------P01grid tie GRIDTIEauthorityDOWN IEEE USER PORT

ADV/FX/AUX-----------P01loadshed 22.0 Vdcoff set pointDOWN INC DEC PORT

ADV/FX/AUX-----------P01vent fan 26.0 Vdcon set pointDOWN INC DEC PORT

ADV/FX/AUX-----------P01vent fan off 5 minperiodDOWN INC DEC PORT

ADV/FX/AUX-----------P01diversion 29.2 Vdcon set pointDOWN INC DEC PORT

ADV/FX/AUX-----------P01diversion 30 secoff delayDOWN INC DEC PORT

ADV/FX/AUX-----------P01aux output


ADV/FX/PAGE3---------P01choose category

PG2 AUX STACK PG4

ADV/FX/AUX-----------P01aux output AUTOcontrolDOWN INC DEC PORT

ADV/FX/AUX-----------P01aux output cool fanfunctionDOWN INC DEC PORT

ADV/FX/AUX-----------P01genalert 22.0 Vdcon setpointDOWN INC DEC PORT

ADV/FX/AUX-----------P01genalert 4 minon delayDOWN INC DEC PORT

ADV/FX/AUX-----------P01genalert 28.0 Vdcoff set pointDOWN INC DEC PORT

ADV/FX/AUX-----------P01genalert 9 minoff delayDOWN INC DEC PORT

ADV/FX/CALIBRATE-----P01Vac input 120 vacadjustmentDOWN INC DEC PORT

ADV/FX/CALIBRATE-----P01Vac output 120 VacadjustmentDOWN INC DEC PORT

ADV/FX/CALIBRATE-----P01calibration


ADV/FX/CALIBRATE-----P01battery Vdc 25.4 VdcadjustmentDOWN INC DEC PORT

Advanced Inverter Setup Menu (continued)


ADV/FX/PAGE1choose category

ADV INV CHRG PG2

ADV/FX/STACK---------P01stack 1-2PH MasterphaseDOWN INC DEC PORT

ADV/FX/STACK---------P01stack Classic SlavephaseDOWN INC DEC PORT

ADV/FX/STACK---------P01stack OB Slave L1phaseDOWN INC DEC PORT

ADV/FX/STACK---------P01stack OB Slave L2phaseDOWN INC DEC PORT

ADV/FX/STACK---------P01stack 3PH MasterphaseDOWN INC DEC PORT

ADV/FX/STACK---------P01stack 3 PH SlavephaseDOWN INC DEC PORT

ADV/FX/STACK---------P01power save level 0master adjust onlyDOWN INC DEC PORT

MAIN--------------------3:02:14P


ADV/FX/STACK---------P01stacking


ADV/FX/STACK---------P01power save level 0slave adjust onlyDOWN INC DEC PORT

Continued from previous page….

Page 2

Page 3

Page 4

Page 1MAIN-------------------

3:02:14P




CH

AR

GE

CO

NTR

OLL

ER

900-0131-01-00 Rev A.vsd\CC Setup on MATE\2012-03-21©2012 OutBack Power Technologies. All Rights Reserved. Page 8


Changing more detailed operating parameters requires access to the Advanced Setup Menu. Advanced Menu for the

FLEXmax Charge Controller (Page 1 of 2)

ADV/CC/CHGR----------P02output current 80.0 A limitDOWN INC DEC PORT

ADV/CC/ADVANCED------P02MPPT mode auto trackDOWN INC DEC PORT

ADV/CC/ADVANCED------P02grid tie mode

nonGTDOWN INC DEC PORT

ADV/CC/ADVANCED------P02park MPP 77.0%

DOWN INC DEC PORT

ADV/CC/ADVANCED------P02Mpp range limit %VOCmaximum 90%DOWN INC DEC PORT

ADV/CC/ADVANCED------P02rebulk voltage

24.8 VdcDOWN INC DEC PORT

ADV/CC/ADVANCED------P02vbatt calibration

29.3 Vdc 0.0 VdcDOWN INC DEC PORT

ADV/CC/ADVANCED------P02RTS compensation

wideDOWN INC DEC PORT

ADV/CC/ADVANCED------P02RTS comp limitupper limit 28.2 VdcDOWN INC DEC PORT

ADV/CC/EQ------------P02eq voltage 28.8 VOC

DOWN INC SETUP ADV

ADV/CC/EQ------------P02eq time 1 hours

DOWN INC SETUP ADV

ADV/CC/EQ------------P02 end CC eq menu

TOP ADV MAIN

ADV/CC/EQ------------P02eq auto eq interval

0 daysDOWN INC SETUP ADV

ADV/CC/AUX-----------P02vent fan

DOWN INC SET PORT

ADV/CC/AUX-----------P02aux control OFF

DOWN ON OFF PORT

ADV/CC/aux-----------P02 end of menu

TOP ADV MAIN

ADV/CC/CHRG----------P02absorb voltage 28.8 V

DOWN INC DEC PORT

ADV/CC/CHRG----------P02float voltage 27.2 V

DOWN INC DEC PORT

ADV/FX/CHRG----------P02 end charger menu

TOP ADV MAIN

ADV/CC/ADVANCED------P02snooze mode

<0.6 AMPDOWN INC DEC PORT

ADV/CC/ADVANCED------P02wakeup modeVOC change 3.0 VDOWN INC DEC PORT

ADV/CC/ADVANCED------P02wakeup modetime 5 minutesDOWN INC DEC PORT

ADV/CC/ADVANCED------P02MPP range limit % VOCminimum 1/2DOWN INC DEC PORT

ADV/CC/ADVANCED------P02absorb time

1.0 hoursDOWN INC DEC PORT

ADV/CC/ADVANCED------P02absorb end amps

0ADOWN INC DEC PORT

ADV/CC/ADVANCED------P02RTS comp limitlower limit 26.4 VdcDOWN INC DEC PORT

ADV/CC/ADVANCED------P02auto restart

mode 0DOWN INC DEC PORT

ADV/CC/ADVANCED------P02AUX output polarity

activeDOWN INC DEC PORT

ADV/CC/ADVANCED------P02Reset CC to factory

defaults?DOWN YES NO PORT

ADV/CC/ADVANCED------P02end CC advanced menu

TOP ADV MAIN

ADV/CC/PAGE1choose category

ADV CHGR CCADV PG2

ADV/CC/PAGE2---------P02choose category

PG1 EQ AUX MAIN

Advanced Menu for the FLEXmax Charge Controller

(Page 2 of 2)

MAIN--------------------3:02:14P




B

B



ADV/PASSWORD------------Enter the password


A


system performance

MAIN--------------------3:02:14P



FX CC DC MATE


MAIN-------------------3:02:14P


Press and hold the 2 left soft keys at the same time.

Release when the Main screen appears.

FLEX

net D

C

900-0131-01-00 Rev A.vsd\FNDC\2012-03-21©2012 OutBack Power Technologies. All Rights Reserved. Page 9

Main ScreenMAIN----------------

3:02:14P


E -------------- FBattery Discharging

State of Charge 100%

DC Now 25.4V 100%IN 0.4A 0.010kWOUT 1.6A 0.040kWBAT -1.2A -0.030kW

DC Today minSOC 97%In 247AH 12.84kWHOut 240AH 12.50kWHBat 7AH 0.34kWH

DC BAT 25.4V 100%Bat -0.3A -0.010kWNet 0.4AH 0.00kWHDays Since Full 1.1

FX Total 25.4V 97%Inverting 0.000kWAC Loads 0.000kWBuying $ 0.000kW

State-of-Charge Screen

Summary Screen #1

Summary Screen #2

Summary Screen #3

Summary Screen #4

Press this soft key to proceed. This screen will also automatically move forward after a user-defined period of time.

1

1

1

1

STATUS------------------choose device:

FX CC DC MAIN

MAIN--------------------3:02:14P


Main Screen


STATUS/DC/PAGE 1-------

STATSMETER SHUNT BATT PG2

A: 0.1 A 0.001 kWB: 0.0 A 0.000 kWC: 0.0 A 0.000 kWDOWN STATUS

A: -1 Ah 0.100 kWHB: 0 Ah 0.000 kWHC: 0 Ah 0.000 kWHDOWN UP TOP

METER/DC/SHUNT Aremoved

12 AH 0.16 kWHDOWN UP TOP

METER/DC/SHUNT Acharged


STATUS/DC/SHUNT Amax removedamps 0.9DOWN UP RESET TOP

STATUS/DC/SHUNT Amax removedkWatts 0.010DOWN UP RESET TOP

STATUS/DC/SHUNT Amax chargedamps 10.1DOWN UP RESET TOP

STATUS/DC/SHUNT Amax chargedkWatts 0.129DOWN UP RESET TOP

STATUS/DC/SHUNT Bmax removedamps 0DOWN UP RESET TOP

STATUS/DC/SHUNT Bmax chargedamps 30.2DOWN UP RESET TOP

STATUS/DC/SHUNT Bmax chargedkWatts 2.040DOWN UP RESET TOP

STATUS/DC/BATTtotal days at 100%

0.5DOWN UP RESET TOP

STATUS/DC/BATTdays since chargeparameters met 5.9DOWN UP TOP

STATUS/DC/BATTbattery min today

24.8 VdcDOWN UP RESET TOP

STATUS/DC/SHUNT Bmax chargedamps 39.8DOWN UP RESET TOP

METER/DC/SHUNT Bremoved

0 AH 0 kWHDOWN UP TOP

METER/DC/SHUNT Bcharged


METER/FN/METERDC firmware revision

000.00/040DOWN UP TOP

STATUS/DC/SHUNTend of shuntstatus menu

UP TOP STATUS

STATUS/DC/BATTbattery max today

25.4 VdcDOWN UP RESET TOP

STATUS/DC/BATTtemp comp’d battsetpoint 28.4 VdcDOWN UP TOP

STATUS/DC/BATTsystem batterytemperature 29°CDOWN UP TOP

STATUS/DC/BATTcycle chargefactor 78%DOWN UP TOP

STATUS/DC/BATTcycle kWhr chargeefficiency 65%DOWN UP TOP

STATUS/DC/BATTlifetime kAH removed 5

DOWN UP RESET TOP

STATUS/DC/BATTend of batterystatus menuUP TOP STATUSMETER/FN/METER

end of meter menu

UP TOP STATUS

STATUS/DC/SHUNT Cmax removedamps 0DOWN UP RESET TOP

STATUS/DC/SHUNT Cmax chargedamps 30.2DOWN UP RESET TOP

STATUS/DC/SHUNT Cmax chargedkWatts 2.040DOWN UP RESET TOP

STATUS/DC/SHUNT Cmax chargedamps 39.8DOWN UP RESET TOP

METER/DC/SHUNT Cremoved

0 AH 0 kWHDOWN UP TOP

METER/DC/SHUNT Ccharged


STATUS/DC/PAGE2--------

PG1 AUX MAIN

STATUS/DC/AUX---------aux control

manualDOWN STATUS

STATUS/DC/PAGE2-------aux relay state: OFF

UP STATUS

These screens are informational only. No changes can be made from this location in the Menu Map.

MAIN-------------------3:02:14P




(continued)

900-0131-01-00 Rev A.vsd\FNDC Adv\2012-03-21©2012 OutBack Power Technologies. All Rights Reserved. Page 10


ADV/DC/BAT----------P03battery capacity110 amphoursTOP INC DEC ADV

ADV/DC/PAGE1choose category

ADV BAT SHUNT PG2

ADV/DC/SHUNT--------P03shunt A mode enabled

DOWN EN DIS TOP

ADV/DC/SHUNT--------P03shunt B mode enabled

DOWN EN DIS TOP

ADV/DC/SHUNT--------P03shunt C mode disabled

DOWN EN DIS TOP

ADV/DC/SHUNT--------P03shunt setup complete

TOP ADV MAIN

ADV/DC/PG2choose category

PG1 CHARGE AUX PG3

ADV/DC/CHARGEreturn amps 10.4

DOWN INC DEC TOP

ADV/DC/CHARGEbattery voltage 26.0

DOWN INC DEC TOP

ADV/DC/CHARGEparameters met time

1 minutesDOWN INC DEC TOP

ADV/DC/CHARGEcharge factor 93%

DOWN INC DEC TOP

ADV/DC/AUXCONTROLcurrently MAN-OFF

DOWN OFF AUTO ON

ADV/DC/AUXCONTROLhigh volts 29.0 Vdc

DOWN INC DEC TOP

ADV/DC/AUXCONTROLlow volts 22.0 Vdc

DOWN INC DEC TOP

ADV/DC/AUXCONTROLSOC high 90%

DOWN INC DEC TOP

ADV/DC/AUXCONTROLSOC low 59%

DOWN INC DEC TOP

ADV/DC/AUXCONTROLhigh set point delay


ADV/DC/AUXCONTROLlow set point delay


ADV/DC/AUXCONTROLinvert logic YES

DOWN YES NO TOP

ADV/DC/AUXCONTROLaux parameterscomplete

TOP ADV MAIN


MAIN--------------------3:02:14P



system performance






FX CC DC MATE

MAIN--------------------3:02:14P


ADV/DC/PG3---------P03choose category

PG2 RESET CLR MAIN

ADV/DC/RESET-------P03reset DC to factorydefaults?

NO YES TOP

ADV/DC/CLEARclear data logmemory?

YES NO TOP

FLEX

net D

C

ADV/DC/CHARGEcharge parameterscomplete

TOP ADV MAIN

MAIN-------------------3:02:14P




About OutBack Power TechnologiesOutBack Power Technologies is a leader in advanced energy conversion technology. Our products include true sine wave inverter/chargers, maximum power point tracking charge controllers, and system communication components, as well as circuit breakers, batteries, accessories, and assembled systems.

Contact InformationTelephone: +1.360.435.6030 (Main)

+1.360.618.4363 (Technical Support)+1.360.435.6019 (Fax)

Mailing Address: OutBack Power Technologies Sales & Marketing5917 - 195th Street N.E. 6115 – 192nd Street NEArlington, WA 98223 USA Arlington, WA 98223 USA

E-mail: [email protected]

Web Site: www.outbackpower.com

DisclaimerUNLESS SPECIFICALLY AGREED TO IN WRITING, OUTBACK POWER TECHNOLOGIES:

(a) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION.

(b) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSS OR DAMAGE, WHETHER DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK.

Warranty SummaryOutBack Power Technologies warrants that the products it manufactures will be free from defects in materials and workmanship for a period of five (5) years subject to the conditions set forth in the warranty detail, found in the product manual.

OutBack Power Technologies cannot be responsible for system failure, damages, or injury resulting from improper installation of their products.

Notice of CopyrightMATE Series Overview © January 2012 by OutBack Power Technologies. All Rights Reserved.

TrademarksOutBack Power is a registered trademark of OutBack Power Technologies.

Date and RevisionJanuary 2012, Revision A

Part Number900-0131-01-00 Rev A

North America:5917 - 195th Street N.E. Arlington, WA USA+1.360.435.6030900-0131-01-00 Rev A

system display and controller - outbackpower.com · mate (continued) 900-0131-01-00 rev a.vsd\mate...

Documents