t his study guide is designed to prepare the student for nationally industry recognized assessments....
TRANSCRIPT
![Page 1: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/1.jpg)
![Page 2: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/2.jpg)
This study guide is
designed to prepare the student for nationally industry
recognized assessments.
A basic overview and introduction
to hand tools is
provided in this module.
![Page 3: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/3.jpg)
Table of ContentsA. Hand Tools
1. What is a Hand Tool?2. Chisels and Punches
B. Safety Scenario
TO BE USED AS A DEMO ONLY
![Page 4: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/4.jpg)
What is a hand tool?
Hand tools are powered
manually.
![Page 5: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/5.jpg)
In this section…Chisels
Punches
![Page 6: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/6.jpg)
Punch
• Punches indent metal, drive pins and align holes
• There are three common types: center, prick and straight
![Page 7: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/7.jpg)
•Wear appropriate personal protective equipment (i.e. safety glasses)•Make sure that the blade is
beveled at the correct angle•Do not use a chisel head that
has become mushroomed or flattened
![Page 8: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/8.jpg)
The _____ handles oftools must not be
splintered.
_____a. adjustable _____b. wooden_____c. steel_____d. none of the above
![Page 10: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/10.jpg)
Accident: 201043213Report ID: 0953220 Silver State Wire Rope And Rigging,
Inc.3853 Losee Road
North Las Vegas, NV 89030
![Page 11: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/11.jpg)
Two employees were on the catwalk of an overhead bridge crane. They were repairing a radio transmitter-receiver for the crane's remote control system. One employee was sitting in front of the crane's bridge control cabinet, tracing and testing the function of
conductors for the crane. The second employee was in front of the crane's
hoist control cabinet.
![Page 12: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/12.jpg)
The employee checking the wiring was sweating profusely from the
heat as he worked in the energized 480-volt cabinet. He
grabbed a 120-volt conductor with needlenose pliers. A portion of the
plastic coating on the handle of the pliers was missing, and the
employee was electrocuted.
![Page 13: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/13.jpg)
The second employee received an electric shock when he removed the first employee from the circuit.
![Page 14: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/14.jpg)
The first employee was
pronounced dead at the North
Vista Hospital.
![Page 15: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/15.jpg)
You must take steps to decrease such hazards in your workplace. Recognize, evaluate, control.
![Page 16: T his study guide is designed to prepare the student for nationally industry recognized assessments. A basic overview and introduction to hand tools](https://reader038.vdocument.in/reader038/viewer/2022102819/56649cfe5503460f949cf415/html5/thumbnails/16.jpg)
This presentation was developed by the training division of
EEIWashington D.C. 20011
Phone: 1 (877) 717-3347 http://www.engineerexcellence.com
COPYRIGHT 2005
All rights reserved
Published in The United States of AmericaNo part of this presentation may be reproduced, stored in a retrieval system, or transmitted by any means, electronic,
mechanical, photocopying, recording, or otherwise, without written permission of the authors. No patent liability is
assumed with respect to the use of the information contained herein. While every precaution has been taken in the
preparation of this book, the authors and publisher assume no responsibility for errors or omissions. Neither is any liability
assumed for damages resulting from the use of the information contained herein.
TO PURCHASE THE COMPLETE
Certified in 7 TrainingSERIES CONTACT US:
1 (877) 717-3347
OR VISIT OUR WEBSITE:
http://www.engineerexcellence.com