T3 Series Mini Dot Matrix Printer

Operation

1. Turn printer power switch to ON position. 2. Red light will come ON. 3. Green light will come ON. (If the green light is Off, press online button) 4. Printer is operational with both LED lights ON.

Paper Feed

1. Press Online Button. Green light will go OFF and printer will be offline. 2. Press Paper Feed Button to advance paper roll. 3. To stop paper feed press Paper Feed Button.

Replacing Paper Roll

1. Open the Paper Cover. 2. Insert spindle into paper roll and put in the printer paper case. 3. Turn power to the printer, press Online Button. Green light will be OFF. 4. Insert paper into the feeder and press and hold Paper Feed Button to start print head

turning. Paper will come out. 5. To stop paper roll feed, press Paper Feed Button. Green light will come ON. 6. Close the Paper cover. Printer is online and ready for printing.

Paper  Cover  

Paper  Feed  Button  

Online  Button  

Red  Light  Green  Light  Cover  Panel  (Ribbon)  

ON  /OFF  Switch  

Ribbon Installation

1. Open the Paper Cover of the printer and push Ribbon Panel Cover towards paper roll. 2. Press the right side of the ribbon cassette, left side will be lifted. Remove cassette. 3. New cassette: Put down gently the right side of ribbon cassette and place the left side

down to engage the gear wheel in the print head. If required rotate the knob of the ribbon cassette slightly in clockwise direction to make sure that ribbon cassette is down to the bottom.

4. Re-install movable Ribbon Panel Cover and close the paper cover Printer Self Test

1. Press and hold Paper Feed Button. 2. At the same time press and hold Online Button. 3. Printer will start to print out self checking script

   

   0  

   

Printer  Power  Switch  ON  /  OFF  Power  connection  

from  SkidWeigh  RS232  Port  Spindle