table of contents · 2020. 5. 6. · solutions for the latest data center technologies such as 400g...
TRANSCRIPT
![Page 1: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/1.jpg)
![Page 2: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/2.jpg)
2
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
TABLE OF CONTENTS
MULTILANE ............................................................................................................................................3
INSTRUMENTS ........................................................................................................................................5
BIT ERROR RATE TESTERS ................................................................................................................................. 5
OSCILLOSCOPES ............................................................................................................................................... 6
TIME DOMAIN ANALYZERS (BERT + SCOPE) ....................................................................................................... 7
TIME DOMAIN REFLECTOMETRY ....................................................................................................................... 7
OPTICAL SWITCH BOXES ................................................................................................................................... 8
CLOCK RECOVERY MODULES ............................................................................................................................ 8
V93000 ATE Test Solutions ......................................................................................................................9
INTERCONNECTS ................................................................................................................................... 11
SOLUTIONS PER MSA ..................................................................................................................................... 12
QSFP-DD ........................................................................................................................................................ 12
OSFP .............................................................................................................................................................. 13
QSFP28/56 ..................................................................................................................................................... 13
QSFP+ ............................................................................................................................................................ 13
Micro QSFP .................................................................................................................................................... 13
SFP-DD .......................................................................................................................................................... 14
DSFP .............................................................................................................................................................. 14
SFP28/56 ....................................................................................................................................................... 14
CFP8 .............................................................................................................................................................. 14
CFP4 .............................................................................................................................................................. 15
CFP2 .............................................................................................................................................................. 15
CFP2-ACO ...................................................................................................................................................... 15
CFP2-DCO ...................................................................................................................................................... 16
CFP ................................................................................................................................................................ 16
ADAPTERS ..................................................................................................................................................... 16
ANALYZERS .................................................................................................................................................... 16
CABLES .......................................................................................................................................................... 17
SOLUTIONS AND SERVICES .................................................................................................................... 18
AUTOMATED TRANSCEIVER TESTING .............................................................................................................. 18
DAC CABLE TESTING ....................................................................................................................................... 18
COMPLIANCE TESTING ................................................................................................................................... 18
COMPLIANCE TEST SUITE................................................................................................................................ 19
COMPLIANCE TEST SERVICES .......................................................................................................................... 19
THERMAL TEST SOLUTIONS ............................................................................................................................ 19
![Page 3: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/3.jpg)
3
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
MULTILANE When it comes to data communications, MultiLane has been offering high-speed test and measurement
equipment for more than a decade. From the early days of 10 Gigabit Ethernet to the 400 Gigabit Ethernet
test challenges of today, we have worked to ensure that our technology keeps pace with industry needs. We
provide a comprehensive portfolio of data center interconnect test solutions encompassing IC and
transceiver characterization, host line-card testing, and link testing. Diversity is key to MultiLane, so we are
constantly widening the scope of form factors and architectures in our product lines to support customer
requirements. Our product lines encompass portable instruments, stand-alone benchtop instruments and
automated test platforms, ensuring customer satisfaction. In addition, MultiLane also offers compliance
testing as a service to customers. We provide developers, module vendors, network installers, and data
center operators with high-performance test equipment at a very affordable price.
Currently, MultiLane has leading-edge test
solutions for the latest data center technologies
such as 400G Ethernet with 100 Gbps data running
on a single wavelength (100G per lambda). We
also have a comprehensive set
of development solutions for
QSFP-DD, OSFP, CFP8, and
many other multi-source
agreements (MSAs).
The ability to test
a system is just as
important as
developing it: a
fact known to
any technical
professional.
This reflects the
cruciality of test
solutions, which we
develop in close
collaboration with tier-
one equipment vendors, ensuring we
are addressing the market’s needs.
Above all, the data center market
requires speed, not only when it comes to
communications but also to companies getting
their products to market quickly to maximize their
market share. This is where MultiLane’s agility
enables us to quickly respond to customer needs
with our domain expertise and proprietary
technology. Our comprehensive product offerings
include optical and electrical oscilloscopes, bit
error rate testers, TDR cable testers,
interconnect products, and fully
automated transceiver test
solutions, as well as
compliance test services for
100G and 400G
technologies. Our
portfolio of
solutions helps
achieve the
successful
outcome that
developers,
manufacturers
and installers of
these new
technologies strive for.
We understand the
complexity of solutions
required for physical-layer tests at
these high speeds as well as the
economic realities of this business sector. Our
experts work hard to provide solutions that meet
or exceed customer needs. At the same time, we
also take the pinch out of test and measurement
purchases, enabling our customers to pass the
savings onto their customers.
![Page 4: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/4.jpg)
MultiLane Instruments
ML4039B
ML4079
ML4054 – 400 - BTP
![Page 5: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/5.jpg)
5
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
INSTRUMENTS
BIT ERROR RATE TESTERS Bit error rate testers (BERTs) are usually the initial step for communications
testing. What these instruments do is generate a digital test pattern,
typically a pseudorandom binary sequence (PRBS), which drives a device
under test (DUT) that could be an optical module plugged into the faceplate
of the instrument. Following the transmission through the link, the receiver
in the BERT captures the signal. This setup can be used for multiple testing
purposes, such as to evaluate the performance of a transmitter, receiver
or an optical link. MultiLane supports general-purpose BERTs that connect through fixtures and coax
cables, as well as BERTs that present an MSA compliant standard.
A BERT needs to be tailored to the characteristics of the device that requires testing. Key parameters include:
• Baud rate
• Number of channels
• Modulation format (e.g., NRZ, PAM-4, etc.)
• Test pattern (e.g., PRBS15)
• Signal amplitude
• Port type (e.g., QSFP-DD)
• Form factor (e.g., portable, chassis, etc.)
Part Number Max Baud Rate (GBd)
Channels Pattern Length Data Format Max Amplitude
(mVpp diff.) Other
General Purpose BERTs
ML4039-BTP 30 4 Up to PRBS 31 NRZ 800 Benchtop
ML4039B Gen2-BTP 1.25 - 28 4 Up to PRBS(Q)31 PAM4 / NRZ 800 Benchtop
ML4039B-JIT Gen2 30 4 Up to PRBS31 NRZ 2200+ Jitter impairments, benchtop
ML4039D 29.5 4 Up to PRBS31Q PAM4, NRZ 1500 Benchtop
ML4039E 56 4 Up to PRBS31, PRBS13Q, SSPRQ
PAM4, NRZ 800 Benchtop
ML4039EN 56 4 Up to PRBS31, PRBS13Q, SSPRQ
PAM4, NRZ 800 Benchtop, crosstalk noise injection
ML4039EML 56 4 Up to PRBS31, PRBS13Q, SSPRQ
PAM4, NRZ 1800 Benchtop, single-ended EML drive
ML4079 30 8 Up to PRBS31 NRZ 800 Benchtop
ML4079D 29.5 8 Up to PRBS31, PRBS13Q, SSPRQ
PAM4, NRZ 1500 Benchtop
ML4079D
ML4039D
![Page 6: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/6.jpg)
6
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
OSCILLOSCOPES To evaluate the performance of transmitters
through jitter and eye-diagram analysis, digital
sampling oscilloscopes are essential tools. They
are sometimes used in unison with a BERT, which
produces the digital test pattern, while the
oscilloscope captures the signal after it has run
through the tested device for signal quality
analysis.
When specifying a scope, planning for extensibility
is vital. The user’s test requirements change with
the progress of the data communications market.
Our customers can be certain that their MultiLane
test equipment will be a lasting investment, so
they should make sure that they choose a model
that is compatible with their extended product
development roadmap. For instance, the
ML4015D provides 40 GHz of optical bandwidth to
support 100G
Lambda optical
technology with
53.125 GBaud
PAM4 signaling.
Key considerations include:
• Bandwidth
• Number of electrical channels
• Number of optical channels
• Maximum pattern length
• Modulation format
• Form factor
Host Emulators, Margin Testers
ML4070-SFP 30 3x1 PRBS 7, 9, 15, 23, 31 NRZ 800 Margin tester, benchtop, SFP format
ML4070-QSFP 30 3x4 PRBS 7, 9, 15, 23, 31 NRZ 800 Margin tester, benchtop, QSFP format
ML4070-QDD 28 3x8 NRZ: up to PRBS31 PAM4: up to PRBSQ31
PAM4, NRZ 800 Margin tester, benchtop, QSFP-DD format
ML4070-OSFP 28 3x8 NRZ: up to PRBS31 PAM4: up to PRBSQ31
PAM4, NRZ 800 Margin tester, benchtop, OSFP format
Manufacturing BERT
ML4054-400-BTP 29 8 Up to PRBS31(Q) PAM4, NRZ 800
Manufacturing, benchtop, CFP8 format (adapters for QSFP28, QSFP-DD and OSFP)
ML4054-400-LP 29 8 Up to PRBS31(Q) PAM4, NRZ 800 Low- profile version for thermal testing
JTOL Clock Source
ML407-PAM 56 1 Up to PRBS31(Q) PAM4, NRZ 1000 JTOL clock source to be used with ML4039/ 4079 BERTs, benchtop
![Page 7: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/7.jpg)
7
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
*Check datasheet for possible combinations
TIME DOMAIN ANALYZERS (BERT + SCOPE)
One of our most practical instruments is the time domain analyzer (TDA). We have developed this general-
purpose high-speed instrument to facilitate processes when it comes to product development, regular lab
usage, and customer support. Our TDAs have combined a source, an error analyzer and a high-speed
sampling oscilloscope, all integrated in a single product available for only a fraction of the cost of competing
products.
Part Number Bandwidth Max Baud Rate [GBd]
Channels Max Pattern Length
BERT/Scope Data Format Other
TDAs
ML4004E 50 GHz DSO 53 1 ch BERT 1 ch DSO
PRBS31/ PRBS16(SSPRQ)
PAM4, NRZ Benchtop
ML4004E-2x 50 GHz DSO 53 2 ch BERT 1 ch DSO
PRBS31/ PRBS16(SSPRQ)
PAM4, NRZ Benchtop
ML4004-JIT 32/50 GHZ DSO 30.2 2 ch BERT 1 ch DSO
PRBS31/ PRBS13
BERT: NRZ Scope: PAM4 & NRZ
Benchtop with jitter injection
TIME DOMAIN REFLECTOMETRY
For testing cables and interconnects, we offer the ideal tool: A time domain reflectometer (TDR). Time
domain reflectometry/transmission can be used to test network return loss (S11), propagation loss (S21) and
crosstalk. Moreover, it can provide the impedance profile of an electrical channel. MultiLane supplies semi-
automated solutions for the testing of direct-attach cables and TIAs.
Part Number Bandwidth Rise Time Channels Pattern Lock Data Format Other
TDRs
ML4035 35 GHz 12 ps 4 PRBS16 NRZ & PAM4 Benchtop, TDR, BERT, DSO
Part Number Electrical
Bandwidth (GHz)
Optical Bandwidth
(GHz)
Max Electrical Channels
Max Optical Channels
Max Pattern Length
Data Format
Other
Oscilloscopes
ML4015D 32/50 25/40 4* 4* PRBS16/SSPRQ PAM4, NRZ
Benchtop, SM or MM
ML4025-BTP 32/50 NA 4 NA PRBS13(Q) PAM4, NRZ
Benchtop
![Page 8: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/8.jpg)
8
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
OPTICAL SWITCH BOXES
An optical switch box is needed so that automated test platforms can permit the system to measure the
performance of transmitters and receivers at multiple wavelengths or channels, depending on the
transceiver design. The MLO4034 Optical Switch Box incorporates a WDM demultiplexer, integrated power
meters, variable optical attenuators and optical switches to form an integrated switch matrix. It enables
receivers and transmitters to be tested at up to four wavelengths or channels.
Key features include:
• FC/APC connectors for reduced return loss
• Built-in programmable optical attenuator
• Built-in power meter
• Cost-effective, small footprint, rugged instrument
• Complete set of APIs and a dozen example code blocks to speed up integration
CLOCK RECOVERY MODULES
Optical clock recovery modules are required when a clock signal is not
present to trigger the oscilloscope or when it is better to use the embedded
clock present in the data stream, such as for 100G Lambda optical signals.
Clock recovery modules are an essential tool for transmitter signal
characterization.
Model Type
Optical Switch Boxes
MLO4034-CWDM4 CWDM4 (SMF, CWDM4 wavelength grid)
MLO4034-PSM4 PSM4 (SMF, 4 parallel fibers)
MLO4034-SR4 SR4 (MMF, 4 parallel fibers)
MLO4034-LR4 LR4 (SMF, LR4 wavelength grid)
Model Type
Optical Clock Recovery Modules
ML1016D-CR-53PS 53.125/26.56 GBd PAM4, SMF
ML1016D-CR-25NS 25.78G NRZ, SMF
ML1016D-CR-25NM 25.78G NRZ, MMF
ML1016D-CR-53PS 53.125/26.56 GBd PAM4, SMF
MLO4034-CWDM4
![Page 9: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/9.jpg)
9
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
V93000 ATE Test Solutions Below is a list of the redesigned instruments that form a direct extender to Advantest’s V93000 ATE tester.
In addition to the redesigned instruments, MultiLane offers turnkey solutions for ATE testing. The solution
includes application development, DUT load board design and embedded high-throughput application
libraries. These solutions will enable fully automated, at-speed testing up to 112 Gbps of high-speed I/O
devices.
Part Number Description
V93000 ATE
AT4039D 4 lane 56 Gbps (28 GBaud) BERT cassette
AT4039E 4 lane 112 Gbps (56 GBaud) BERT cassette
AT4025 4 channel 50 GHz bandwidth digital sampling oscilloscope cassette
AT4039EML 4 lane 112 Gbps (56 GBaud) BERT with single-end high-amplitude outputs for driving EMLs
1900002 Family board
AT93000-TWINN
Twinning frame assembly (includes backplanes and their stiffeners, metal brackets, RF pogo
brackets, pressurized air-cooling system, cable feedthrough, power supply and housing, power
cabling)
AT93000-SMPM-EXT SMPM blind-mate extraction tool (optional)
71W-18K2-18K6-00380A Rosenberger blind-mate load board cables 38cm
Typical load board connectors: either SMPM or 1.85 mm.
AT93000-CALKIT Calibration kit for BERT and DSO (stiffener with PCB and breakouts to ML4035 and other
references, RF cables and pogo brackets – optional)
V93000
![Page 10: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/10.jpg)
MultiLane Interconnects
ML4064-MCB-TR
ML4062-MCB
ML4057
ML4066-QSFP
![Page 11: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/11.jpg)
11
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
INTERCONNECTS
Due to demand for ever-increasing faceplate density and data rate, form factors and MSAs designed to serve
these requirements have proliferated. Interconnects, adapters, analyzers, and cabling are required to set up
the test systems of equipment vendors for the testing and qualification of their products. MultiLane’s
commitment to supporting the evolution of the data center has not only led us to present a complete
selection of these interconnect products but to also make sure these tools are always compliant with the
relevant standard. For example, MultiLane supports host compliance boards, module compliance boards,
loopback modules, and analyzers for I2C CMIS and state machine testing.
Form factors:
➢ CFP
➢ CFP2-ACO
➢ CFP2-DCO
HOST COMPLIANCE BOARD MODULE COMPLIANCE BOARD
➢ CFP4
➢ CFP8
➢ Micro QSFP
➢ OSFP
➢ QSFP-DD
➢ SFP-DD
A host compliance board is a breakout fixture that
can be plugged into the system host side and
provide access to the host electrical input and
output signal (TP1a, TP4a compliance test points).
It is a passive structure for optimum signal
integrity.
ML4064-HCB
A module compliance board is a breakout fixture
into which a transceiver module can be plugged to
provide access to the module electrical input and
output signal (TP1, TP4 compliance test points).
MultiLane’s MCBs are designed to provide an
efficient and easy method of programming and
testing transceivers and active optical cables.
These MCBs include a complete user-friendly GUI
that supports all features defined by the respective
MSA. The GUI simplifies configuration processes to
enable intuitive memory map programming and
testing. It is designed to provide an ideal
environment for transceiver module testing,
characterization, and manufacturing.
ML4041-K MCB
ML4062-BO-HCB2
➢ QSFP28
➢ QSFP+
➢ SFP28
➢ DSFP
![Page 12: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/12.jpg)
12
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
LOOPBACK MODULES
Passive/thermal loads
Loopback modules are packaged in a standard MSA housing compatible with its
respective ports. Transmit data from the host is electrically routed (internal to the
loopback module) to the receive data outputs and back to the host. These modules act as
thermal loads and have programmable power dissipation. This design provides an
economical way to exercise system ports during R&D validation, production testing, and
field testing.
SOLUTIONS PER MSA
QSFP-DD
Passive
Host/MCB
ML4062-MCB QSFP-DD MCB, 8x50 Gbps, 2.92mm K connectors, low insertion loss, current
sense monitor. Comes with Windows GUI and API.
ML4062-MCB-LBK QSFP-DD Host board with high-speed lanes looped back from TX to RX. Comes
with Windows GUI.
ML4062-MCB-TR QSFP-DD MCB, 8x50 Gbps, Ardent connectors, low insertion loss, current
sense monitor. Comes with Windows GUI and API.
ML4062-MCB-MXP
QSFP-DD MCB, 8x50 Gbps, 2x8 MXP connectors, low insertion loss, current
sense monitor. Comes with Windows GUI and API.
Breakout/
HCB
ML4062-HCB1 QSFP-DD HCB, 4x50 Gbps, K connectors, low insertion loss
HCB1: CH1-4
HCB2: CH5-8 ML4062-HCB2
ML4062-BO QSFP-DD breakout, 8x50 Gbps, 2x8 Huber+Suhner MXP connector rows.
Loopback
Module
ML4062-TL1
Supports 8x50 Gbps electrical interface. Thermal load with programmable
power dissipation up to 16W or higher can be powered from QDD connector
or from pin header.
ML4062-TL2a
Supports 8x50 Gbps electrical interface, built with advanced PCB material.
Thermal load with programmable power dissipation up to 21W. Can be
powered from QDD connector or from pin header. Available with front LCD
option.
ML4062-SLB Supports 8x50 Gbps electrical interface, built with advanced PCB material and
programmable power dissipation up to 14W.
Controller ML4062-CNT
Host board to supply power to the QSFP-DD modules and an I2C master that
allows to read/write the registers. Comes with a GUI. Used to power up and
control ML4062-TL1 and ML4062-TL2a.
![Page 13: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/13.jpg)
13
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
OSFP
Passive
Host/MCB
ML4064-MCB OSFP MCB, 8x50 Gbps, 2.92mm K connectors, low insertion loss, current sense
monitor. Comes with Windows GUI and API.
ML4064-MCB-TR OSFP MCB, 8x50 Gbps, Ardent connectors, low insertion loss, current sense
monitor. Comes with Windows GUI and API.
Breakout/
HCB ML4064-HCB OSFP HCB, 8x50 Gbps, 2.92mm K connector rows with low insertion loss.
Passive
Loopback
Module
ML4064-LB Supports 8x50 Gbps electrical interface, built with advanced PCB material and
programmable power dissipation up to 18W.
QSFP28/56
Passive
Host/MCB
ML4041-K* QSFP28 MCB, 4x28 Gbps, 2.92mm K connectors, low insertion loss, current
sense monitor. Comes with Windows GUI and API.
ML4041-K-56 QSFP56 MCB, 4x56 Gbps, 2.92mm K connectors, low insertion loss, current
sense monitor. Comes with Windows GUI and API.
Breakout/
HCB
ML4020 QSFP28 HCB, 4x28 Gbps, high-density connector rows (MXP or MSMPM) with
low insertion loss.
ML4020-N QSFP28 Breakout, narrow version, 4x28 Gbps, high-density connector rows
(MXP or MSMPM) with low insertion loss.
ML4020-K-56 QSFP28 HCB, 4x56 Gbps, 2.92mm K connectors with low insertion loss.
Passive
Loopback
Module
ML4002-28 Supports 4x28 Gbps, programmable power dissipation up to 3.5W. Also
available in 8W version (ML4002-28-8W).
ML4012-28-LC Supports 4x28 Gbps, low-cost loopback module featuring superior signal
integrity.
ML4002-28-C5 4x28 Gbps, insertion counter, power dissipation up to 5W, with programmable
power ramp-up.
*Check datasheet for other option available
QSFP+
Passive
Host/MCB ML4021
QSFP+ MCB, 4x14 Gbps, SMA connectors, low insertion loss, current sense
monitor. Comes with Windows GUI and API.
Passive
Loopback
Module
ML4002 Supports 4x14 Gbps, programmable power dissipation up to 3.5W.
Micro QSFP
Passive
Host/MCB ML4044
Micro QSFP MCB, 4x14 Gbps, SMA connectors, low insertion loss, current sense
monitor. Comes with Windows GUI and API.
Breakout/
HCB ML4045 Micro QSFP HCB, 4x28 Gbps, 2.92mm K connectors with low insertion loss.
![Page 14: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/14.jpg)
14
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
SFP-DD
MCB ML4022-MCB SFP-DD MCB, 2x50 Gbps, 2.92mm K connectors, low insertion loss, current
sense monitor. Comes with Windows GUI and API.
HCB ML4022-HCB SFP-DD HCB, 2x50 Gbps, 2.92mm K connector with low insertion loss.
Passive
Loopback
Module
ML4022-LB Supports 2x50 Gbps electrical interface, built with advanced PCB material and
programmable power dissipation up to 4.5W.
DSFP
MCB ML4019-MCB DSFP MCB, 2x50 Gbps, 2.92mm K connectors, low insertion loss, current sense
monitor. Comes with Windows GUI and API.
HCB ML4019-HCB DSFP HCB, 2x50 Gbps, 2.92mm K connector, with low insertion loss.
SFP28/56
Passive
Host/MCB ML4024
SFP28 MCB, 28Gbps,2.92mm 40GHz K connectors, current sense, limit monitor
with low insertion loss. Comes with Windows GUI and API.
Breakout/
HCB
ML4023 SFP28 HCB, 28Gbps, 2.92mm 40GHz K connectors with low insertion loss.
ML4023-N SFP28 breakout, 28Gbps, narrow version, K connectors with low insertion loss.
Passive
Loopback
Module
ML4026-28-0dB 28Gbps, programmable power dissipation up to 2W.
ML4026-28-5dB 28Gbps, programmable power dissipation up to 2W, 5dB attenuators.
CFP8
Passive
Host/MCB ML4057
CFP8 MCB, supports 16x25 Gbps, 8x50G PAM and CFP8-ACO, 2x8 40GHz
Huber+Suhner 2x8 connectors with a low insertion loss. Comes with Windows
GUI and API.
Breakout/
HCB
ML4058 CFP8 HCB, supports 16x25 Gbps, 8x50 Gbps PAM and CFP8-ACO, 1x8 40GHz
Huber+Suhner connectors with low insertion loss.
ML4058-N
CFP8 breakout, narrow version, supports 16x25 Gbps, 8x50 Gbps PAM and
CFP8-ACO, 1x8 40GHz Huber+Suhner connectors with low insertion loss at
16GHz.
Passive
Loopback
Module
ML4059 Supports 16x25 Gbps, 8x50 Gbps PAM and CFP8-ACO, superior SI
performance, programmable power dissipation up to 21W.
![Page 15: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/15.jpg)
15
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
CFP4 Passive
Host/MCB ML4049
CFP4 MCB, 4x28 Gbps, 40GHz with 2.92mm K connectors, with low insertion
loss. Comes with Windows GUI and API.
Breakout/
HCB ML4052
CFP4 HCB, 4x28 Gbps, high-density connector rows with low insertion loss of
0.9dB at 16GHz.
Passive
Loopback
Module
ML4050 4x28 Gbps, customized memory map, MSA compliant, programmable power
dissipation up to 6.5W.
CFP2
Passive
Host/MCB ML4042
CFP2 MCB, 10x10 Gbps, current sense, 18GHz right angle SMA connectors.
Comes with Windows GUI and API.
Breakout/
HCB ML4028 CFP2 HCB, 10x10 Gbps with high-density connector rows.
Passive
Loopback
Module
ML4030-SR10 10x10 Gbps with programmable power dissipation up to 12W, insertion
counter, custom memory maps.
Retimed
Loopback
Module
ML4043-SR10 10x10-14.5Gbps, customized memory maps, input & DFE adaptation to
optimize eye opening, insertion counter, wide range CRU.
ML4029 4x25-28Gbps CDR, PRBS generator and detector, temperature monitor,
custom memory maps, input & DFE adaptation to optimize eye opening.
CFP2-ACO
Passive
Host/MCB ML4027-ACO
CFP2-ACO MCB, 4x32 Gbps, current sense with 2.92mm connectors, provides
an easy solution for programming CFP2-ACO. Comes with Windows GUI and
API.
Breakout/
HCB
ML2028-ACO CFP2-ACO HCB, 4x32 Gbps, 40GHz with 2 Huber+Suhner MXP 1x8 coaxial PCB
connectors. Ordered as ML2028-ACO-MXP or ML2028-ACO-MSMPM.
ML4028-ACO
CFP2-ACO HCB, 4x32 Gbps, 40GHz with high-density connector rows featuring
an insertion loss of 2.4dB at 16GHz. Ordered as ML4028-ACO-MXP or ML4028-
ACO-MSMPM.
ML2028K-ACO CFP2-ACO HCB, 4x32 Gbps, 40GHz with K connectors featuring an insertion
loss of 1.1dB at 16GHz.
Passive
Loopback
Module
ML4030-ACO 4x32 Gbps, offering heat dissipation up to 12W, programmable to different
power levels.
ML4030-LR4 4x25 Gbps, offering heat dissipation up to 12W, programmable to different
power levels.
Passive Loopback Module
ML4030-ACO-CAL
4x32 Gbps, provides programmable power dissipation up to 12W.
4 variants are available:
ML4030-ACO-CAL1: TX and RX lanes matched to 1.2ps. ML4030-ACO-CAL2:
crossed lanes YQ and YI, as well as XQ and XI. ML4030-ACO-CAL3: crossed
lanes YI and XQ. ML4030-ACO-CAL4: crossed lanes YQ and XQ.
![Page 16: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/16.jpg)
16
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
CFP2-DCO
Passive
Host/MCB ML4027-DCO
CFP2-DCO MCB, 8x25 Gbps, current sense with 2.92mm connectors. Comes
with Windows GUI and API.
Breakout/
HCB ML4028-DCO
CFP2-DCO HCB, 8x25 Gbps, 40GHz with high-density connector featuring low
insertion loss.
Passive
Loopback
Module
ML4030-DCO 8x25 Gbps, offering heat dissipation up to 24W, programmable to different
power levels.
CFP
Passive
Host/MCB ML4018
CFP MCB, 10x10 Gbps, current sense/limit monitor with low insertion loss.
Comes with Windows GUI and API.
Breakout/
HCB ML4014 CFP HCB, 10x10 Gbps, featuring a low insertion loss.
Passive
Loopback
Module
ML4013 10x10 Gbps, programmable power dissipation up to 24W, temperature sensing,
customized memory maps.
ML4013-HP 10x10 Gbps, programmable power dissipation up to 40W, temperature sensing,
customized memory maps.
ADAPTERS An adapter can function either as a port extender that keeps the same form factor while providing signal
access for diagnostics, or as a media converter that transforms one MSA-compliant form factor into
another. The port extender provides access to low-speed control signals, or power supply lines, and can be
used in conjunction with an analyzer board for CMIS state machine analysis. This also enables the debug of
a host-to-module connection.
Adapter – Media Converter Part Number Description
ML4086 CFP2 to QSFP28, MSA compliant passive adapter.
ANALYZERS
MultiLane provides analyzer boards that plug into the port extenders and provide
low-speed signal access. They also enable power supply, I2C, and functional
testing. The boards come with Windows GUI and USB interface.
ML4066-QDD ADP/ANA
![Page 17: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/17.jpg)
17
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
Adapter – Port Extenders and Analyzers
Part Number Description
ML4066-QSFP QSFP to QSFP diagnostic adapter
ML4066-ANA-QSFP QSFP analyzer module that plugs on the ML4066-QSFP. Comes with USB interface and
Windows GUI.
ML4066-QDD QSFP-DD to QSFP-DD diagnostic adapter
ML4066-ANA-QDD QSFP-DD analyzer module that plugs on the ML4066-QDD. Comes with USB interface
and Windows GUI.
ML4066-OSFP OSFP to OSFP diagnostic adapter
ML4066-ANA-OSFP OSFP analyzer module that plugs on the ML4066-OSFP. Comes with USB interface and
Windows GUI.
ML4066-SFP SFP to SFP diagnostic adapter
ML4066-ANA-SFP SFP analyzer module that plugs on the ML4066-SFP. Comes with USB interface and
Windows GUI.
CABLES
In high-speed testing, the quality and performance of the cable are crucial to the accuracy and repeatability
of the results. The cable needs to offer minimal attenuation and signal distortion. It must also operate
efficiently across the frequency band of interest.
MultiLane offers a wide variety of cables to provide test instrumentation connectivity.
Part Number Description
MLCBPS-SMA-100 100 cm phase stable cable, SMA connector
MLCBPM-SMA-100 100 cm, phase matched cable, SMA connector
MLCBPS-K-100 100 cm, phase stable cable, 2.92 mm connector
MLCBPM-K-100 100 cm, phase matched cable, 2.92 mm connector
MLCBPS-2.4-100 100 cm, phase stable cable, 2.4 mm connector
MLCBPM-2.4-100 100 cm, phase matched Cable, 2.4 mm connector
MLCBMS-K-15 (female) 15 cm, 1x8 MSMPM to K (f) cable, type A
MLCBMS-K-30 (female) 30 cm, 1x8 MSMPM to K (f) cable, type A
MLCBMS-K-15 (male) 15 cm, 1x8 MSMPM to K (m) cable, type A
MLCBMS-K-30 (male) 30 cm, 1x8 MSMPM to K (m) able, type A
MLCBMS-K-xx (m/f) xxcm, 1x8 MSMPM to K (m) cable, type A
MLCBMS-K-xx (m/f) Type B xxcm, 1x8 MSMPM to K (m) cable, type A
![Page 18: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/18.jpg)
18
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
SOLUTIONS AND SERVICES Testing is a necessary part of product development, qualification and manufacturing. In recognition of this
key step, MultiLane’s diverse portfolio of test solutions and services is there to facilitate the test process and
minimize human error. We excel at the qualification process and compliance testing services, thanks to our
automated test platform and prepackaged test suites. At MultiLane, we offer these capabilities to our
customers, performing full-circle testing support for their development, characterization, validation, and
manufacturing requirements.
AUTOMATED TRANSCEIVER TESTING 100G CWDM4 has arrived at the data
center. As a result, testing transmitters
and receivers has become four times
more time-consuming and complex. To
streamline the process, we have
developed our ML7007 software, an
automated platform that orchestrates
the test process. Used with our
MLO4034 optical switch box, the
software can fully characterize a device
with no need for human intervention.
The technician simply connects the
switch box to an oscilloscope and the
appropriate BERT. At only a press of the
start button, the platform runs the tests
and generates a fully detailed printout of
the results. Either the ML4070 BERT
margin tester or the ML4054 BERT,
optimized for manufacturing
environments, can be used by the
solution.
DAC CABLE TESTING Our ML4035 TDR is built to test direct-attach cables. It has an integrated calibration routine and a GUI
designed for simple operation. The instrument is used to characterize return and insertion loss. Users can
also view the results, compare them to standards, and print test reports.
COMPLIANCE TESTING Developing a component is important, but it is not enough. There is a
need to confirm performance and demonstrate interoperability. We
offer two different approaches to compliance testing depending on the
customers’ needs.
Application Required software option
Manufacturing ML7007-MAN
Return merchandise authorization (RMA) testing ML7007-RMA
Characterization & validation ML7007-VAL
Failure analysis ML7007-FA
![Page 19: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/19.jpg)
19
INN
OV
ATI
ON
FO
R T
HE
NEX
T G
ENER
ATI
ON
COMPLIANCE TEST SUITE For customers who want to perform compliance testing themselves, we offer our compliance test suite. It is
designed to test hosts as well as modules for OIF_CEI_03.1 and IEEE_CAUI-4 compliance. The solution
supports output and stressed input tests. An oscilloscope, a reference clock and a DUT are the three main
elements required for an output test. The user makes the hardware connections, chooses the standard of
interest, configures the DSP and then chooses the appropriate measurements. In contrast, a stressed input
test requires a BERT, an oscilloscope, an MCB and an HCB. For both of these tests, the system generates a
report showing performance relative to the standard chosen.
COMPLIANCE TEST SERVICES With lean staffing and a lack of time, equipment vendors can find qualifying parts to be challenging. Instead,
they can direct their efforts and focus toward developing and manufacturing products to serve their
customers and leave compliance testing to MultiLane. MultiLane offers 100G Optical and Electrical
compliance testing services for system vendors, system integrators, module vendors and switch vendors. We
have been aiding transceiver vendors to optimize their products and pass standard specifications since
November of 2015. Examples of standards supported include 100GBase-LR4, PSM4, CWDM4 and CAUI-4. In
addition, 400G and 100G Lambda Compliance test services are also available upon request.
THERMAL TEST SOLUTIONS The validation of optical transceivers over temperature is critical to test spec compliance over operating
conditions and to demonstrate the robustness of the technology. MultiLane has developed a scalable solution
that enables the thermal testing of transceivers with precise temperature control. In order to provide this
capability MultiLane designed custom doors, which is part of the MLT8000 Series of Thermal Solutions, that
fit into a standard TestEquity thermal chamber, and can hold up to 16 low profile 400G BERTs with DUTs. The
DUTs will be inside of the chamber, and the test equipment will be
outside, properly thermally isolated. With this setup, up to 16 DUTs
can be tested simultaneously for optical transmitter characteristics
such as eye diagram mask margin and TDECQ, and receiver
sensitivity.
ML4054-400 Low Profile 400G BERT
MLT8107 Custom Door for TestEquity Model 107
![Page 20: TABLE OF CONTENTS · 2020. 5. 6. · solutions for the latest data center technologies such as 400G Ethernet with 100 Gbps data running on a single wavelength (100G per lambda). We](https://reader034.vdocument.in/reader034/viewer/2022052004/601734f35aab9709e010b7a4/html5/thumbnails/20.jpg)
THANK YOU
+1 510 573 6388 +961 5 941 668 +886 3
North America Worldwide Asia 48511 Warm Springs Blvd. Suite 203 Houmal Technology Park 14F-5/ Rm.5, 14F., No 295 Fremont, CA 94539 Askarieh Main Road Sec.2, Guangfu Rd. East Dist., USA Houmal, Lebanon Hsinchu City 300, Taiwan (R.O.C) +1 510 573 6388 +961 5 941 668 +886 3 5744 591