table of contents - can-med healthcare · 2010-10-26 · from the mri scanner room we can offer...

tabl

e of

con

tent

s

1Visit Us Online at www.magmedix.com

Prices and specifications subject to change with out notice.

Physiological . . . . . . . . . . . . . . . . . . . . . . 2

Respiratory. . . . . . . . . . . . . . . . . . . . . . . 12

Procedures. . . . . . . . . . . . . . . . . . . . . . . 18

Transport . . . . . . . . . . . . . . . . . . . . . . . 29

Utility Furniture. . . . . . . . . . . . . . . . . . . . 35

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Imaging Enhancement . . . . . . . . . . . . ..49

Measurement / Test . . . . . . . . . . . . . . . 54

Comfort / Positioning . . . . . . . . . . . . . . 59

Accessories . . . . . . . . . . . . . . . . . . . . . 68

Custodial . . . . . . . . . . . . . . . . . . . . . . . 75

Cryogen . . . . . . . . . . . . . . . . . . . . . . . . 80

Starter Kits . . . . . . . . . . . . . . . . . . . . . . . 85

Order Form . . . . . . . . . . . . . . . . . . . . . 88

Please Note: Product Specifications are subject to change without notice.

Veteran Owned Small Business CCR (Cage Code) 3WRA6

phys

iolo

gica

l equ

ipm

ent

2

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616

Visit Us Online at www.magmedix.com


Serenity Vital Signs Monitor. . . . . . . . . . . . .3

Patient Vital Signs Monitor . . . . . . . . . . . . . 4

Tesla Blood Pressure Manometer. . . . . . . . 5 Pulse Oximeter . . . . . . . . . . . . . . . . . . . . . .6

OxySat Pulse Oximeter . . . . . . . . . . . . . . .7

MAGLIFE light . . . . . . . . . . . . . . . . . . . . . 8

Blood Pressure Manometer . . . . . . . . . . . . 9

Non-Magnetic Stethoscope . . . . . . . . . . . . 9

Non-Magnetic Laryngoscope .. . . . . . . . . . .9

Portable Anesthesia Machine for MRI . . . . .10

Trolley for Anesthesia Machine .. . . . . . . . 10

MRI Caddy . . . . . . . . . . . . . . . . . . . . . . .11


3

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MAGLIFE Serenity Vital Signs Monitor

A state-of-the-art monitoring system for MRI examinations

There are two features that don’t seem to go together: ECG monitoring and MRI examination! Magmedix nowoffers a unit that provides ECG recording for use in the MRI.The MAGLIFE Serenity reduces the risk of burns and signal interference to a minimum and permits standardized opera-tion just as in a conventional environment.

During MRI examinations, the body temperature may increase or decrease by several degrees. Therefore, neonates, infants as wellas patients suffering from reduced thermo-regulation, severe vascular disorders, cardiac arrhythmia, poor general condition or epi-lepsy require special monitoring during the examination.

The MAGLIFE Serenity was developed to monitor all vital parameters during anaesthe-sia in an MRI environment and is specifically developed for adults, children and neo-nates.

The advantages of MAGLIFE Serenity at a glance:ECG recordingGating, digital/analog outputsWide operational rangeCore and skin temperature measurement by use of an optical sensor (optional)Ease of mobilityWireless data transmission (optional)Safe SpO2 measurementMagnetic field monitoringOperates in up to a 3Tesla environmentAccessories suitable for MRIFlexibility in the configuration of options

Item Number: 03-ML-SERENITY Description: MAGLIFE Serenity Vital Signs Monitor

Please visit www.magmedix.com or call 866.646.3349, toll free, for more information and a comprehensive list of accessories.

phys

iolo

gica

l equ

ipm

ent

4

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Tesla Guard - Patient Vital Signs Monitor for MRI The Tesla Guard MRI Patient Vital Signs Monitor offers aclearly arranged LCD color display with individually adjustable alarm parameters for monitoring NIBP, ECG, SPO2, and IBP. The Tesla Guard monitors neonate, pediatric, and adult patients.

This monitor can be equipped with an optional SCIO unit formonitoring anesthetic agents and respiration: etCO2, ICO2, AFc, O2, N2O, etHAL, iHAL, etlSO, etENF, iENF, etSEV, etDES, iDES.

From the MRI Scanner room we can offer wireless data transferto an existing PC, or data transfer to an external screen as an option, but the monitored values can be seen clearly even from the MRI control room.

phys

iolo

gica

l equ

ipm

ent

The Telas Guard monitor has been certified MRI Safe and Compatible to 3T., when kept at least 4.5 feet from the center of bore. Item Number: Description: 03-EFT06EPL Tesla Guard03-EFTGGAS Tesla Gas Module, SCIO 03-EFTGOB Tesla Observer Software & Wireless Data Transfer03-01-8050 3 Packs of (50 each) Electrodes 03-01-8050-GEL 3 Pack of (50 each) Electrodes with a tube of Gel.

Tesla Guard(B) with SCIO

Foam ECG Electrode with ClearSite® Gel TechnologyClearSite® adhesive gel, Small size makes it ideal for general purpose monitoringRadiotrasnslucent, MRI safe

Display 170.9 mm x 129.6 mm / 6.6 x 5.0 inchBattery operating time 180 min.Clear LCD-color display

ECG-Leads I, II, III (free selectable) Measuring ranges 15 – 300 Beats/min.

SpO2 Measuring ranges 1 – 100 % Accuracy(70-100%) Adults +/- 3% Neonates +/-4%

NIBP Measuring range 10-250mmHg - Adults – 270 mmHg 10 – 250 mmHg ; Pediatric – 180 mmHg 10 – 250 mmHg; Neonatal – 140 mmHg 2,5; 3; 5; 10; 15; 20; 25; 30; 45; 60; 120; 240 Min. Interval Length

IBP Measuring ranges -50 mmHg to 330 mmHg, Measuring Accuracy +/-2mmHg or +/-3%

Individually adjustable alarm parametersClearly readable values even from greater distances, Rugged sensors for everyday clinical lifeIntegrated monitoring system for the strength of the magnetic field, Fiber optic sensors, Interference-free images, Battery and integrated battery charger

5

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



The Tesla NIBP Blood Pressure Manometer’s systolic, diastolic, mean, and heart rate display can be easily read from a distance.

This Manometer can be used to monitor blood pressure in neonates, pediatric and adult pa-tients. It includes an integrated battery charger with a battery life up to 5 hours.

This device has been certified to 3T.

Item Number: Description: 03-EFNBE Tesla NIBP Blood Pressure Manometer - Non Invasive (please specifiy the accessory package needed - for Neonates/ Children or for Adults) 03-EFBOSS Tesla Boss System - includes Tesla Blood Pressure Manometer and OxySat Pulse Oximeter

SPECIFICATIONS Height 5.28 inches Depth 10.2 inches Width 10.2 inches Weight 7.8 LBS Operating Temperature Range 32 to 122 degrees, F. Voltage Range 85 - 265 V at 47- 63 Hz Positioning - Can be placed as close as 4.5 ft. from center of bore Maximum field strength 20mT Modes of Operation Manual or Interval (Interval Times 1,2,5,10 minutes) Measuring Ranges Adults Heart Rate: 30-220 BPMSystolic NBP: 40-260 mmHgMean NBP: 20-200 mmHgDiastolic NBP: 20-200 mmHG Neonates Heart Rate: 30-220 BPMSystolic NBP: 40-130 mmHgMean NBP: 25-103 mmHgDiastolic NBP: 20-90 mmHG Static Cuff Accuracy +/- 3 mmHg

Tesla Blood Pressure Manometer- Non Invasive

phys

iolo

gica

l equ

ipm

ent

phys

iolo

gica

l equ

ipm

ent

6

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Pulse Oximeter for MRI

MR OPERATIONS:Use Only Magmedix Supplied Fiber Optic Sensors. (Sensors containing electrical conduc-tors will cause patient burns). The Model 7500FO must be kept outside the 200 Gauss Line of the MR field and af-fixed to an immovable object. Do Not Place on MR Bed.

Please Note: The power supply is Not MR Safe

The 7500FO (fiberoptic) pulse oximeter was specifically developed for MR environments. The sensor is easy for technicians to apply by using the simple toe or finger wrap. The design keeps patient safety in mind too. Radiofrequency burnsand image artifacts are virtually eliminated because of the 7500FO’sfiberoptic sensor and cable design. Use for monitoring infant, pediatric and adult patients.

The stylish, compact 7500FO’s simple functionality, minimum 16-hour battery life, 4-hour quick recharge, and minimum of 70 hours of memory makes it well-suited for a variety of clinical and specialty applications. The 7500FO provides a wide range of display indicators that provide reliable readings. The 7500FO’s flexible alarm management options include patient security mode and a user-defined default that offers customizable patient settings. The 7500FO’s analog output capability allows it to interface easily with other equipment. nVision software is also available as an easy oximetry screening and Six Minute Walk Test (6MWT) solution. Designed to provide effortless viewing, professional analysis, report generation and reliable data storage, the powerful nVision software package is a cost effective solution for basic oximetry screening applications and sleep studies, and now with 6WMT reporting. The transfer cable, item number 03-7500SC must be purchased for use with this softwareA Pole Mount System provides secure monitor placement. Pole sold separately.Oxygen Saturation Range 0–100% SpO2 Pulse Rate Range 18–321 BPM Displays: Pulse Strength, Alarm Indicator, Alarm Silenced, Numeric Displays, Low BatterySaturation Accuracy (Arms)a: 70–100% Memory: 70 hours (assuming continuous operation) Power Requirements: 100V AC 60 Hz, 220V AC 50 HzInternal Power:Battery:7.2 volt NiMH battery pack Storage Life: 21 days minimumOperating Life (fully charged): 16 hours minimum Recharge Rate: 4 hours maximumType of Protection: Internally powered (on battery power) Degree of Protection: Type BF-Applied Part Mode of Operation: Continuous Enclosure Degree of Ingress Protection: IPX2 Analog Outputs: SpO2 Output Range: 0-1 VDC (0–100% SpO2), 1.27 VDC (out of track) Pulse Rate Output Range: 0-1 VDC (0–300 BPM), 1.27 VDC (out of track) Event Marker: 0 V (no event), 1 V (event occurred) Accuracy: ± 2% (SpO2), ± 5% (Pulse Rate) Load Current: 2 mA maximum a ± Arms represents approximately 68% of measurements

Specifications are subject to change without notice. Item Number: Description: 03-7500FO Medical Pulse Oximeter for MRI 03-8000FC-20 Adult/Pediatric Fiber Optic Sensor, 20 feet/6 meters 03-8000FI-20 Infant/Pediatric Fiber Optic Sensor, 20 feet/6 meters 03-8000FC-30 Adult/Pediatric Fiber Optic Sensor, 30 feet/9 meters 03-8000FI-30 Infant/Pediatric Fiber Optic Sensor, 30 feet/9 meters 03-8000FW Sensor Wrap, Finger 03-8000TW Sensor Wrap, Toe 03-7500-NV nVision Software for Pulse Oximeter 03-7500SC Data Cable for nVision Software

7

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



phys

iolo

gica

l equ

ipm

entOxySat Pulse Oximeter

The MRI-compatible pulse oximeter OxySat guarantees patient safety by application of fibre-optical sensor systems. You and OxySat will have certainty on your patients’ status.

The OxySat offers you continuous pulse and oxygen saturation values, either numerically or graphically. The pulse oximeter deter- mines saturated hemoglobin within pulsating arterial blood.

Plethysmogram for: • optimum sensor application• determination of artifacts• determination of poor circulation

Tesla OxySat and its dual safety system:• interference-free accurate vital parameters for anesthetists and pediatricians guarantee patient safety.• interference-free images for radiologists guarantee patient safety.

Dual safety is achieved by high quality standards. Extensive test series and long-term examinations with MR systems of all common field strengthsand sequences. In-house production of the sensor system.

Special pressure-reduced light receiver for children and adults. This prevents necrosis during long-term checkups: • special butterfly sensor system for neonates advantage: suitable for very small extremities. • transmission by optical fibres advantage: patient safety • optical fibres are coated with sheathed spiral tube advantage: prevention of footstep damage • sensors are completely free of metals advantage: patient safety

Height 5.1 inches Depth 10.7 inches Width 10.2 inches Weight 14.8 LBS Operating Temperature Range 41 to 104 degrees, F. Voltage Range 85 - 265 V at 47- 63 Hz Battery Operation >240 min. Positioning - Can be placed as close as 4.5 ft. from center of bore Maximum field strength 20mT

Heart Rate Measuring Range 20BPM - 255 BPM Accuracy at 40 - 235 1/min +/- 1.7% of measured value Resolution 1 BPM SpO2 Measuring Range 1-100% Accuracy at 80 -100% +/- 3% of measured value Resolution 1%

Item Number: Description:EFOXYSATE OxySat Pulse Oximeter03-EF5010015 Neonatal Finger Sensor03-EF5010026 Adult/Child Finger Sensor When Ordering, Please Specifiy Finger Sensor Type

Shown: OxySat Pulse Oximeter (Monitor Only)

Other advantages:- clear display- individually adjustable alarm parameters- absolutely metal-free fiber optic sensors- integrated power pack- battery operated- extremely bright plethysmogram- rugged sensors for everyday clinical life

8

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MAGLIFE light

Safe day-to-day monitoring of MRI patients

Now MRI monitoring is in reach of virtually every MRI center. MAGLIFELight has a large color screen visible from the controlroom displaying the patient's SPO2, pulse rate and or NIBP values. The sensors are suitable for all types of patients: adults, children, neonates and premature infants.

MAGLIFE light is the ideal patient monitor for your routine MRI examinations.Compact and easy to use, MAGLIFE light does not require any installation procedure and has been designed for daily use.

Indication of SPO2, pulse, heart rate and non-invasive blood pressure values (Sys, Dia, MAP)Displays the most recent NIBP valuesDisplay of patient values on large colour screen visible from a distance120VAC or battery power supplyVisual and audible alarmsLow-battery alarmIntegrated magnetic field detectorOperates at up to the 400 Gauss lineStandby mode for instant restartingLightweight and easy to handleFor installation on stand, shelf, articulated arm

Versions/options:SPO2 and NIBPSPO2NIBPNon-magnetic trolley with accessory basket

Item Number: 03-ML-LITEDescription: MAGLIFE Light Combination Monitor

phys

iolo

gica

l equ

ipm

ent

• MRI Fiber Optic Handle with battery & bulb

• Full Assortment of Blades available. Call for item numbers

Item Number: Description:03-310001 MRI Laryngoscope

handle standard with battery and bulb

03-310010 2 Low Magnetic Field Batteries03-310011 2 Pk Bulbs

phys

iolo

gica

l equ

ipm

ent

9

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Full 300 mm/HG calibration on a portable stand. Individually calibrated cartridge tube, resiliently mounted and completely recessed in aluminum scale. Permanent, easy to read numerals on black anodized scale. Inflation system includes latex bag with Air-Flo control and tubing with standard adult cuff. Also available as a tabletop unit.

Pole mounted unit also comes with basket to hold bulb and cuff assembly. Mounted on rugged 304 stainless pole with 5 caster, die cast, base. Measures 63” x 24”, adjustable with 48” range. Other size cuffs are available upon request.

Item Number: Description: 03-E1002 MRI Adjustable Mercury Manometer - Pole

Mount 03-E1002-T MRI Mercury Manometer -Table Model 03-E1002-AC Blood Pressure Cuff - Adult Large 03-E1002-L Blood Pressure Cuff - Adult X-Large 03-E1002-CC Blood Pressure Cuff - Child 03-E1002-PC Blood Pressure Cuff - Newborn03-E1002TC Blood Preasure Cuff - Thigh (femoral)

Adjustable Blood Pressure Manometer

This lightweight, stethoscope comes with a non-chilling contact diaphragm of high sensitivity.

This unit was designed exclusively for use in high magnetic fields.

Disposable stethoscopes are also available.

Item Number: Description:03-E1003 Non-Magnetic Stethoscope

Available Blades:AM MAC: 0, 1, 2, 3, 3.5, 4ENG MAC: 1, 2, 3, 4MILLER: 0, 1, 2, 3, 4Wisconsin: 2, 3, 4

Do not use blades in any handle that is not marked “MRI Tested or MRI Safe”

MRI Stethoscope MRI Laryngoscope

phys

iolo

gica

l equ

ipm

ent

10

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Portable Anesthesia Machine for MRIThe Model-2200 MRI Anesthesia Machine is compact, robust and flexible and easy to move. This device has been tested and determined to be "MRI Safe Conditional" in a static magnetic field of 3 Tesla or less, highest spatial gra-dient field of 720 Gauss/cm or less. It can be mounted on a table top, mobile cart, or trolley shown on this page.

Operating Temperature Range 35 to 110 degrees, F. Gas Supply Sources O2 Main and Cylinders 38-70 psi (50 psi is optimal) Air and/or Air Compressor 38-70 psi (50 psi is optimal) Oxygen Concentrator 3-10 psi Fresh Gas Flow 1 to above 20 lpm (each flowmeter) Oxygen Flush Valve Recessed, self-closing, push button color coded and labeled, provides 45-55 L/min. flow while depressed CO2 Absorber System King Systems KAB-9 (re-fillable), or KAB-1 (prefilled/disposable) C02 Absorber Capacity 400 grams soda-lime Directional Valves Built-in the CO2 absorber CO2 Absorber Holding Bracket Plastic, secured with knob to main frame of machine Bag-Ventilator Switch/PVR and Scavenger Outlet Port Hand-operated selector switch and rotating knob for PRV and Scavenging outlet Bellows Latex free, upward inflating, range from 0 to 1.6L Bellows Presure Relief Pre-set at 60 cmH20 Common Gas Outlet Size indexed, quick connect Tubing Circuit King Systems F-360-61 or any standard anesthesia circle system Gas Pressure Hoses DISS/thread indexed, female connectors at both ends Gas Inlet Manifold DISS/thread indexed, male connectors with one way valves Gas Inlet Manifold Filters Located behind Manifold Air and O2 inlet male connectors Oxygen and Air Supply Gauges 0-3000 PSI reading color coded and clearly labeled Gas Inlet Pressure Regulators 0-3000 PSI reading color coded and clearly labeled Main Supply Cylinder DIS S/threaded indexed for O2 Safety back up Cylinder Pin Indexed, yoke mounted for “D” and “E” cylinders for O2 Oxygen Supply Failure Alarm Main and Safety Supply Pneumatically actuated when O2 supply falls below 35 psi Trolley for Anesthesia MachineO2 Concentrator Pneumatically actuated when O2 supply falls below 1 psi Alarm Power Source 9 volt battery located in body of alarm box Alarm On/Off Labeled switch located on body of alarm box Oxygen and Air Flowmeters Calibrated and scaled 0-10 LPM color coded. O2 flowmeter has a fluted control Knob for easy identifi-cation by touch Oxygen Concentrator to power O2 flowmeter only Auxiliary Oxygen Flowmeter Scaled 0-15LPM color coded and clearly labeled Air Compressor may be used to power ventilator and air flowmeter Auxillary O2 Flow Selector Scaled 0-10 LPM in set increments, used for pre/post anesthesia Vaporizer Penlon Delta-Sigma Series, bolt (cage) mounted, temperature compensated, very low maintenance Airway Pressure Gauge Dual Scaled in cmH2O and mmHg, located on front panel of ventilator Pressure Guage Tubing Attached to bag/vent switch arm Mechanical Ventilator Pneumaticaly powered, time cycled, volume constant, pressure variable Ventilator Pressure Relief Dual scaled in cmH2O and mmHg, Located on front panel of ventilator Volume Range 0 to 1.6 L / Insp. Flow Range 0 to .90 lps / Insp. Time Range .2 to 3.0 seconds xp Time Range .2 to 3.0 sec.Ventilator Gas Power 40 to 70 psi (50 psi optimal) Waste Gas Scavanger Positive and negative relief valves, 1 L reservoir bag, vacuum control knob Total System Leakage @ 30cm H2O 0ML/min @ 80cm H2O 0ML/min Internal System Compliance @ 20cm H2O 1.1ML/cm H2 @ 40cm H2O 1.3ML/cm H2O Internal System Resistance @ 1.0L/sec gas flow 4.11cm H2O @ 0.5L/sec gas flow 1.80cm H2O APL Valve Pressure Drop @ 3.0L/min gas flow 0.12cm H2O @ 30L/min gas flow 1.03cm H2O Adjustable Pressure-Limit Adjustable, 0 to 40 cmH2O

Anesthesia machine is designed to be used in conjunction with a monitoring system of your choosing.

Item Number: Description: 03-2200 MRI Anesthesia Machine, Model 2200 03-A106 Anesthesia Trolley, H Braced on Casters

phys

iolo

gica

l equ

ipm

ent

11

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Drug Administration System with three anesthesia qual-ity syringe pumps for the application of drugs during MRI examinations.

With the independent MRI-Caddy® system drug depen-dent patients can also be examined in the MR room. The MRI-Caddy® guarantees optimum drug application dur-ing all phases of treatment: during patient preparation as well as during the examination and after-treatment. This ensures continuous and permanent drug administration and decreases examination time to a minimum.

Specifications:Accuracy: +/- 3% Flow Rate: .01 ml/h to 400 ml/h depending on syringe size selected MR Type: 0.2 to 3 Tesla Operating Voltage: 100 to 240V 50/60Hz Battery: 7.2V/1.3AH per pump Typical Duration: 10h at 5ml/h with a 60 ml Syringe Power Consumption: 110VA Enviromental Operating Temperature: +5 - +40C / +41 - +104F Humidity: 30% to 90% Dimensions: 26 1/2”W x 23 1/2”D x 53”H (to top of shelf)

Item Number: Description:03-EFCADDYE MRI Caddy®

The MRI-Caddy® meets all requirements radiologists and anesthesiologists may have: • interference-free anesthesia values

• interference-free MR images

• drugs can be administered in different modes ml/hr - mg/hr - volume/time - body weight

• patient can be prepared outside the MR room

• pumps may be prepared outside the MR room

• pumps can be operated within MR room

• unit mounted on castors

• three different drugs may be administered simultaneously

• continuous supervision of drug administration is ensured

• only one power cord required

• Common power supply to charge all three pump batteries

• certified to 3.0T

• sits at 200 gauss line

MRI Caddy

resp

irato

ry e

quip

men

t

12

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Du-O-Vac plus Crash Cart . . . . . . . . . . . 13

Compete Du-O-Vac . . . . . . . . . . . . . . . . 13

Du-O-Vac Replacement Parts . . . . . . . . 13

MRI Ventilator. . . . . . . . . . . . . . . . . . . . . 14

Oxygen Therapy Kit . . . . . . . . . . . . . . . . 14

Portable I.V. Pole . . . . . . . . . . . . . . . . . . 14

Blender. . . . . . . . . . . . . . . . . . . . . . . . . . 15

Ventilator Stands . . . . . . . . . . . . . . . . . . 15

Accessory Kits for Ventilators . . . . . . . . 15

Single & Double Cylinder Carts . . . . . . . 16

Cylinder Stands . . . . . . . . . . . . . . . . . . . 16

Oxygen & Gas Cylinders . . . . . . . . . . . . 16

Flowmeters. . . . . . . . . . . . . . . . . . . . . . . 16

Oxygen Regulators . . . . . . . . . . . . . . . . 17

Suction Regulator. . . . . . . . . . . . . . . . . 17

Hoses, Adapters, Couplers . . . . . . . . . .17


resp

irato

ry e

quip

men

t

13

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Because codes do not always occur within reach of an electrical, oxygen or suction outlet, the Du-O-Vac is a lifesaver. This cart can be used anywhere; roof tops, parking garages, waiting rooms, rest rooms, cafeterias and, of course, examination rooms, without the aid of electricity or wall suction. Crash Cart includes complete Du-O- Vac, Flowmeter, Regulator, Demand Resuscitation Valve and an E Size Cylinder. Equipment is mounted on the Oxy-Lite Cart.Features: • 0-350 mmhg of suction • 500 ml Suction Canister with built in Hydro-phobic filter •Two Oxygen power take-offs with check valves • Works off of a 50 psi oxygen source New Improvements: •The suction material now goes directly into the collection canister without first going through the Du-O-Vac +Plus head •Each collection jar has a built in hydro-phobic filter that prevents any suctioned material from going into the Du-O-Vac +Plus if the collection jar becomes overfilled •The collection jar filter acts as a sealing cap when the collection jar is full or is ready for disposal •The Du-O-Vac +Plus is much quieter than the previous model Du-O-Vac. It now has a built-in silencer •The collection jar is single use with ml graduations and a frosted writing strip •Appearance has been improved by machining it from solid aluminum to a flawless finish •Up-grade package to this new style is available for the previous Du-O-Vac Crash Cart

Item Number: Description: 03-CODE1 MRI Du-O-Vac Crash Cart with E Cylinder 03-CODE2 Du-O-Vac Crash Cart without E Cylinder 03-5-101 Du-O-Vac Suction Gauge 0-800mm Hg Suction Gauge 03-5-MRIUP Upgrade Kit for 03-CODE1 or 03-CODE2 - Consists of Du-O-Vac head, Suction gauge, 1 ctn. new style suction jars

Du-O-Vac plus Crash Cart for MRI

Includes Main Body, Suction Bottle, Oxygen Flowmeter and Oxygen Regulator (specify for large or small cylin-der). Also see Wall-Mount Adapters

Item Number: Description: 03-5-100CU-MRI Complete Du-O-Vac03-5-100-MRI Du-O-Vac Only 03-5-101 Du-O-Vac Suction Gauge 0-800mm Hg Suction Gauge. 03-3-110 500ml Bottle / Case of 10 (New Style)

Complete Du-O-Vac

Du-O-Vac Replacement Suction Jars & Bacteria FiltersItem Number: Description:03-3-108 200ml Bottle/Case of 6 (old style)03-3-110 500ml Bottle/Case of 10 (new style)03-3-106 Bacteria Filters for Du-O-Vac/Box of 100 (used wtih old style only) Wall Mount adapters are avaliable. Call 866.343.9611for details

Old Style New Style

This MRI Ventilator is pneumatically powered, single-circuit, volume-constant, time-cycled. It utilizes a high-pres-sure drive with regulated, high internal resistance to control pressure and is considered a non-constant pressure generator. Simultaneously, this MRI Ventilator produces a flow pattern that is constant in spite of changes in lung mechanics (inspiratory square-wave). This MRI Ventilator is designed with internal simplicity for operations and maintenance. Quick connect features allow the operator to provide for all necessary clinical situations: con-trolled ventilation, continuous-flow intermittent mandatory ventilation, constant positive air-way pressure, as well as being adjustable to inspiratory/expiratory ratios that are infinitely variable. A wide-range pressure relief valve allows for both the prevention of barotrauma and time-cycled, pressure-relieved ventilation. Caution: Federal law restricts this device to be used by or on the order of a physician.

resp

irato

ry e

quip

men

t

14

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Kit is comprised of Cart for E Cylinder, E Cylinder, and Oxygen Regulator for E Cylinder, 0-15 LPM. Kit is discounted from the price of the components sold separately.

Item Number: Description:03-V1000 MRI Oxygen

Therapy Kit

MRI Oxygen Therapy Kit

MRI Compatible Ventilator

Specifications: • Dimensions: 8” x 5.5” x 5.5” • Weight: 5 Ibs. • Case Material: Aluminum • All Other Materials: Aluminum, brass, and plastic • Gas Inlet Pressure Range: 30 to 150 PSI • Tidal Volume Range: 0 to 2.0 L • Breaths Per Minute: 0 to 60 BPM • Inspiratory Time Range: 0.2 to 3.0 seconds • Inspiratory Flow Range: 0 to 100 LPM • Pressure Relief Range: 0 to 120 CMH20 • IMV/CPAP Continuous: 0 to 60 LPM • Flow Range PEEP/CPAP Range: +1 to +50

CMH20 • Internal Compliance: 0 CMH20• Air/Oxygen Blenders: Any non-magnetic blender

capable of producing from 30 to 60 PSI • Exhalation Valves: Oceanic-P/N 15.0 reusable

Item Number: Description:03-MAG1 MRI Ventilator03-MAG2 MRI Pole Mount03-MAG3 IMV Kit for MRI Ventilator03-MAG4 Reusable Patient Circuit03-1560 Disposable Breathing Circuits (universal I.P.P.B.), box of 10

MRI Portable I.V. Pole

MRI I.V. Pole is movable with the patient.

• Stable 5-spoke, wide base • Smooth rolling caster • Exceeds tilt test requirements • Aluminum pole adjusts to 83” high • Quad-Pigtail top

Item Number: Description:03-IV300A Portable I.V. Pole 03-IV300AB Portable I.V. Pole (2 or more)

resp

irato

ry e

quip

men

t

15

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



This ventilator stand has a 5-legged, castered base and twin E cylinderholders. Pole mounts for our MRI ventilators and MRI blender are available.

Item Number: Description:03-OS100A Ventilator Stand w/ E-Cylinder Holder 03-100MRR Ventilator Stand w/o cylinder brackets (not shown)03-0S100A-B Ventilator Stand w/ E-Cylinder Holder and pole mount bracket (not shown)

Ventilator Stands

Accessory Kits for Ventilators

Accessory Kit for Ventilators in a Portable Configuration • Blender with 2, 3ft. hoses & Pole Mount bracket • Ventilator Stand with Cylinder Holders and Pole Mount brackets (holds ventillator and blender simultaneously) • 3’ Oxygen Supply Hose For Blender • Air and Oxygen E Cylinders • Regulators ( 1 Air and 1 Oxygen - preset at 50 PSI) • Disposable Patient Circuit-box of 10

Accessory Kit for Ventilators With Wall Gasses • Blender with 2, 15 ft. hoses (air & oxygen) • Ventilator Stand without Cylinder holders (holds ventillator and blender simultaneously) • 3’ Oxygen Supply Hose to Connect Blender and Ventilator • Wall Adapter ( 1 each for Oxygen and Air -please specify manufacturer of your wall mount plate) • Disposable Patient Circuit - box of 10 • Blender Polemount Bracket

Call for Details on Accessory Kits

DIMENSIONS H x W x D 3.5"x3.4"x3.6" 89x86x91 (mm) WEIGHT 2.75 lbs. 1.25 kg ACCURACY ±3% SUPPLY PRESSURES 30 - 75 PSIG 2.1 - 5.3 kg/cm2 ALARM ACTIVATION AND BYPASS When supply pressures differ by 20 ±2 PSI NO. OF PORTS 2 OVERALL FLOW RANGE 20-120 LPM BLEED FLOW 10-120 LPM when activated

NOTE: Combined flow from all outlet ports on any one blender will not exceed the maximum stated flow. Item Number: Description: 03-10030A MRI Blender w/o Supply Hoses, 03-10030 MRI Blender w/15' Air and Oxygen Supply Hoses 03-03867 3' air supply hose 03-03868 3' oxygen supply hose 03-04322 Pole mount

Air/Oxygen Blender for MRI Ventilator

resp

irato

ry e

quip

men

t

16

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Sturdy lightweight oxygen cart weighs only 78 oz. (double cart weighs 106 oz.) Made of a aircraft quality aluminum and coated with heat-cured protective white epoxy. Contoured handle engineered to allow you to walk erect without having the cart catch you in the heels. Cart can accommodate D and E size cylinders. Thumbscrew instantly holds the cylinder in place safely. Strong high-impact plastic wheels for long-lasting wear and reliability.

Item Number: Description:03-HC100MA Front Loading Cart for M Cylinders not shown

Lightweight aluminum cart holds one M cylinder safely and securely. Wing nut allows you to hand tighten cylinder into place securely. MRI safe aluminum with stainless steel bolts. Large wheels allow cart to roll easily over any surface. (Cart not shown).

These sturdy stands are made of epoxy coated stainless steel. Ideal for safely storing extra cylinders in remote areas or for use in MRI facilities with high patient throughput. Cylinders sold separately.

MRI Single or Double Gas E-Cylinder Cart

Item Number: Description:03-HC100A Single Oxy-Lite (pictured left)03-HC200A Double Oxy-Lite (pictured right)

Aluminium Front Loading Cart for M Cylinders

Free Standing D & E Cylinder Holders

Item Number: Description:03-ES104A D & E 4 Cylinder Hoder03-ES106A D & E 6 Cylinder Holder

Item Number: Description:03- FS200 Compact Stand for M Cylinder

M Cylinder Stand

Item Number: Description: 03-M9 M9 Cylinder 03-87D D Cylinder 03-VI00E E Cylinder 03-540A M Cylinder

Please note gas cylinders are shipped empty

Make sure that your gas provider has non-magnetic cylinders to return to your facility while yours are being refilled. If they do not have non-magnetic tanks, you will need to have enough of your own to use while your other tanks are out being refilled. When your cylinders are returned to you please check to make sure that you did get back MRI ones.

MRI Oxygen/Air Cylinders

Aluminum Body Flowmeter

Aluminum body and knob color coded to assure accurate gas ID.

Scale: 0-15 LPM with flood.

Item Number: Description:03-3-700AL Flowmeter

resp

irato

ry e

quip

men

t

17

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Item Number: Description:03-3-200 Regulator for large cylinder factory pre-set at 50 psi. 540 connection. Brass construction. (shown far left)03-3-250A Regulator for small cylinder factory pre-set at 50 psi. Yoke connection. Brass construction. (not shown) 03-3-300A Diaphragm - Style Oxygen Regulator with yoke connection for small cylinder 0 -15 LPM -flow with

flow control knob and dial for tank pressure. Brass construction. 870 connection only for E cylinder (far right)

03-3-400A Brass construction regulator with glass flow meter, 0-15 LPM, 870 connection for E cylinder (second from left)

03-3-400B Brass regulator with glass flow meter, 0-15 LPM, 540 connection (not shown)03-3-350A Aluminum regulator with click-stop flow meter, 870 connection (second from right)03-3-350B Aluminum regulator with click-stop flow meter, 540 connection (not shown) Air cylinders, flowmeters and regulators are also available

MRI Oxygen Regulators

Hose Assemblies, Adapters and CouplersOur hose assemblies are avaliable for a variety of gases and configurations. To compliment our hose assembly line we also carry a variety of hose adapters and couplers. All hose assemblies are avaliable in USA and ISO col-ors. Please call for full details. 866-646-3349

MRI Suction Regulator The MRI Suction Regulator was developed in response to safety concerns in the MRI Scanner room. This device is the answer to suction requirements when utilizing wall gases in the MRI.The non-ferrous materials used in this product will not be drawn to the MRI scanner regardless of its location in the MRI suite. This MRI compatible Suction Regulator will not artifact your MRI images.

VENT PORTS: 3/16” Diameter GAUGE ACCURACY +/-5% FSO Linear REGULATOR ACCURACY: 10% at 200 mm Hg from full flow to zero using a 14 French catheter INLET AND OUTLET FITTINGS: 1/8” NPT Female DISINFECTION: Gas, autoclave, Cidex, Pasteurization or Sterrad™ Magmedix Does Not Offer this Item for Sale Outside the USA Item Number Description: 03-3708 MRI Suction Regulator 0-200 mm Hg

proc

edur

es e

quip

men

t

18

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MRI Caddy®. . . . . . . . . . . . . . . . . . . . . . 19

Portable Anesthesia Machine . . . . . . . . 19

Tables, Carts & Stands . . . . . . . . . . . . . 19

Procedure Light . . . . . . . . . . . . . . . . .. .19

MRI Emergency & Anesthesia Carts . . 20

Hand Injector System . . . . . . . . . . . . . . 21for Gadolinium Contrast Infusion

Phantom Cradles . . . . . . . . . . . . . . . . . . 21

Special Procedures Coils . . . . . . . . 22- 24

Vital Signs Monitor. . . . . . . . . . . . . . . . .24

Gravity System.. . . . . . . . . . . . . . . . . . .25 Surgical Instruments . . . . . . . . . . . . . . . 26

RF Isolation Device. . . . . . . . . . . . . . . . 27

Sat Pads . . . . . . . . . . . . . . . . . . . . . . . . 28

Breast Imaging Kits . . . . . . . . . . . . . . . 28

Smart Tourniquet. . . . . . . . . . . . . . . . . . 28

MRI Laryngoscope . . . . . . . . . . . . . . . . 28


proc

edur

es e

quip

men

t

19

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Drug Adminisration System with three syringe pumps for the application of drugs during MRI examinations.With the independent MRI-Caddy® system drug dependent patients can also be exam-ined in the MR room. MRI-Caddy® guarantees optimum drug application during all phas-es of treatment: during patient preparation as well as during the examination and after treatment. This ensures continuous and permanent drug administration and decreases examination time to a minimum.

The MRI-Caddy® meets all requirements radiologists and anesthesiologists may have. For use with up to 3.0T scanner.See page 11 for details.

Item Number: Description:03--EFCADDYE MRI Caddy®

MRI Caddy®

Portable Anesthesia Machine for MRIThe Model-2200 is designed as a simple to operate unit containing all of the modes and necessary components to deliver a basic anesthetic, including a mechanical ventilator and a single agent vaporizer. See page 10 for details

Tables, Stands, & Carts

See pages 36+ 38 for details

Designed to offer you an easily positioned light source.Articulated Arm for easy adjust-ment. 5-wheel caster base with counter weight for easy movement. Powerful 50-watt halogen light source Swivel joint lamp head. Easy installation and mainte-nance. 12 volt 50 watt halogen bulb with 4000 hour average bulb life. 30 foot cord with remote power supply. Power Supply must be secured outside the 5 gauss line by fas-tening it to a building structural member. A must for every MRI suite.

MRI Procedure Lamp

Item Number: Description: 03-LA201 MRI Procedure Lamp

proc

edur

es e

quip

men

t

20

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Magmedix is proud to offer MRI Anesthesia carts and MRI Emergency Carts. These aluminum carts are light and extremely strong, with drawers that ride on full extension ball bearing drawer slides. Carts are available with breakaway locks for use as a crash cart, or keyed locks for use as an Anesthesia cart. All carts come with a stainless steel pull-out shelf to create extra working space. These high quality carts come with an extensive list of standard features and options. Carts have 5" premium casters, all full swivel, 2 with brake. Tested safe to a 3T MRI environment by Magnetic Resonance Safety Testing Services.

Please Note: Do not place anything in the carts that is not MRI safe.

Anesthesia Cart Accessory Package: MRI Cart 3 Tier Raised Back Rail MRI Cart Side Rail MRI Cart 4 Utility Hooks

Item Number: Description:

03-MR16K MRI 6 Drawer Anesthesia Cart, Key-Locking

03-MR16K-MAN MRI 6 Drawer Anesthesia Cart, Key-Locking w/ Accessory Package

03-MT17K MRI 7 Drawer Anesthesia Cart, Key-Locking

03-MR17K-MAN MRI 7 Drawer Anesthesia Cart, Key-Locking w/ Accessory Package

Emergency Cart Accessory Package:MRI Cart Cardiac Board & Mounting Brackets MRI Cart IV Pole MRI Cart E Cylinder Bracket MRI Cart Utility Hooks


03-MR16B MRI 6 Drawer Emergency Cart w/ Breakaway Lock

03-MR16B-EMG MRI 6 Drawer Emergency Cart w/ Breakaway Lock & Accessory Package

03-MR17B MRI 7 Drawer Emergency Cart w/ Breakaway Lock

03-MR17B-EMG MRI 7 Drawer Emergency Cart w/ Breakaway Lock & Accessory Package

Dimensions of either cart: 45.75” H x 30.50” W x 23.75” D

MRI Emergnecy and Anesthesia Carts

proc

edur

es e

quip

men

t

21

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



When injecting gadolinium contrast dynamically for MR angiography innumerable problems are encountered. Tubing connections can come apart causing gadolinium to spray everywhere. Blood can back out of the IV site if it becomes disconnected from the pressure of the injection. Dead space within the IV tubing can vary depending upon exactly how theIV is set-up.Without knowing the dead space exactly it is impossible to know exactly when the gadolinium reaches theend of the IV tubing and begins entering the patient. This increases the unpredictability of bolus timing. Perhaps thegreatest problem is switching from gadolinium contrast infusionto saline flush. Any delay in beginning the saline flush createsa gap in the bolus. If this gap coincides with acquisition of central k-space data then it can create ringing artifacts that could be misinterpreted as aorticdissection. When using a 3-way stopcock, the rush to switch from gadolinium infusion to saline flush inevitably occurs a little early so that not all of the gadolinium is injected.The waste of gadolinium can be typically 2-3 ml, which amounts to nearly $10. In addition the image quality is not as good. Power Injectors are extremely useful in CT and conventional X-ray angiography because technologists and radi-ologists do not have to be in the room during X-irradiation of the patient. It adds an element of complexity to the injection process for the benefit of reducing radiation exposure to personnel. But in MRI, just like with ultrasound, there is no risk from being in the room during scanning. The relatively smaller volume of dynamic gadolinium con-trast injections is easier to manage by hand rather than power injection. Actually it has been shown that injectors are not necessary, and in many ways they are not as good as injecting by hand, since injecting by hand makes it easier to identify problems with the IV.

Unfortunately none of the intravenous tubing normally available is well suited for the purpose of dynamic gadolinium injections for MRA or MRI. SmartSet is a refined design of an IV tubing system. Design develop-ment has involved tubing lumen, resistance, wall thickness, type of connectors, adaptability to different required lengths, one-handed operation, a valve assembly for automatic switching between gadolinium contrast infusion and saline flush. SmartSet has been used for thousands of cases of dynamic gadolinium contrast infusions for MR Angiography, liver MRI, breast MRI and other dynamic contrast injection with universally favorable experi-ences, and is now available to perform dynamic MR contrast injections by hand.

Item Number: Description:03-TS14 SmartSet (10 Units)03-TS12 SmartSet with Side Port B (10 Units)03-TS13 MR Adapter (10 Units)

Hand Injector System for Gadolinium Contrast Infusion for MRA

MRI Phantom CradlesConsistently and precisely positions the ACR Phantom in the head coil in less than a minute saving valuable MRI time - approximately 30 minutes per week/26 hours per year.

Saves the MRI technologist the frustration of positioning the ACR phantom without a compatible cradle.Available for GE, Hitachi, Siemens, Toshiba, and Philips head coils. Specify make and model of your MRI.

Please email info@magmedix or call toll free 866-646-3349 for specifics

proc

edur

es e

quip

men

t

22

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Special Procedures Coils and Accessories

Special Procedures Head Coil

This Special Procedures Head Coil will serve a number of differ-ent imaging functions. The system consists of a basic transmit and receive quadrature coil for standard imaging, radiation therapy planning, pediatric imaging and/or dual tuned spectroscopy.

This coil is a 12-element birdcage that is 11 inches in diameter and 11 inches between end rings. The electrical performance is similar to the existing GE system head coil in transmit power and SNR (up to 10% increase in SNR). The difference is this coil splits in half to allow for easier patient access and positioning. Also, it is not fixed to the table, allowing it to be easily positioned and slid on the table. The head pad and positioner pads slide within the coil, allowing the coils to be used in a number of unique ways. Once the patient is laid into the coil, the coil can then be positioned around the patient without the patient having to move. This is accomplished with the top off the coil, so the amount of time that the patient is confined is kept to a minimum. Along with larger openings and wide field-of-view mirror, patient anxiety and claustrophobia is reduced.Call for Details - 866.646.3349

Elekta Stereotactic Frame Positioner

This stereotactic frame positioner is for use in the Special Procedures Head Coil. Designed for use with the Leksell® stereotactic head frame, the stereotactic frame positioner addresses drawbacks of other stereotactic head positioners.

Typically, these other positioners are cumbersome and fit poorly into system head coils. While the stereotactic frame is affixed to a patient’s head outside of the MRI suite, the correct positioning is not always apparent without the MRI coordinate frame and MRI coil present. This is because the positioner is attached at the patient end of the system.

With other systems, if the stereotactic frame is inadvertently positioned too low on the patient, the patient’s shoul-ders will contact the MR coil, preventing complete head coverage. Likewise, if the stereotactic frame is positioned too high on the patient’s head, the lesion may not be in the MR coil’s field of view. Finally, if the stereotactic frame is positioned at a poor angle or too far anterior, the patient may not fit into this type of positioner. As a conse-quence, the stereotactic frame could require repositioning – a poor alternative.

The solution is this stereotactic frame positioner. The positioner isattached inside of the coil, (allowing more mobility of coil positioning and freedom of stereotactic frame positioning) and retains a slide mechanism in conjunction to the MR coil’s slide mechanism. This allows the positioner to slide in and out of the coil as well as the coil sliding up and down the table. Now, an inaccurately positioned stereotactic frame will be of little consequence.Call for Details - 866.646.3349

proc

edur

es e

quip

men

t

23

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Thermoplastic Immobilization Kit

The Special Procedures Head Coil was designed specifically to accommodate radiation oncology thermoplastic immobilization masks. Standard system head coils do not have the capability. This radiation treatment planning system that utilizes commonly used thermoplastic masks was developed in conjunction with Med Tec of Orange City, Iowa.

The advantage of this system allows thermoplastic masks to travel freely between MRI, FMRI, CT, PET and radiation treatment. The images can be fused to provide more accurate planning, and better post treatment check-up assessments.

Thermoplastic masks are formed individually for each patient with a hot water bath. The softened material hardens after a few minutes and fiducial markers can be applied. These fiducial markers are visualized in both CT and MRI, and thus accuracy of the planning is improved by fusing the data from each study. Call for Details - 866.646.3349

Pediatric Positioner Covering From Head to Toe

The Pediatric Positioner used with the Special Procedures Head Coil allows you to image children without moving them.

This stationary cradle positioner combined with a sliding split-top coil comprises a fresh solution to pediatric MRI. 60 cm of superior-to-inferior coverage means that a pediatric patient does not have to be moved to image head, torso, and pelvis. Unlike some phased array coils that have poor penetration and inhomogeneities, the split top coil will give full, homogeneous image quality in its 28cm FOV.Call for Details - 866.646.3349

High Resolution Brain Coil

This high performance Brain Coil was developed to image the anatomy of the head or brain and PROBE spectroscopy with increas-es in SNR. The system consists of a basic transmit and receive quadrature coil with end ring modifications that create clearance for a patient’s nose.

The High Resolution Brain coil is a 12-element birdcage with a 9-inch (23cm) diameter and 8-inches (20cm) between end rings. With the addition of a nose notch, the coil can attain 10 inches (25 cm) of clearance from anterior to posterior. The electrical performance of the HR Brain Coil is one nex (up to a 40% increase) better than the GE system head coil in SNR. The coil splits in halves, allowing for easier patient access and positioning. The addition of molded indicators and a coil slide mechanism yields fast and easy patient positioning.Call for Details - 866.646.3349

proc

edur

es e

quip

men

t

24

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Cervical Spine Coil

This C-spine Array was developed to image the anatomy of the neck, C-spine, and brain stem with increases in SNR and patient comfort. The system is a receive-only array consisting of a flexible anterior bib with a conformal rigid base.The C-spine Array is a four channel phased array coil. The cradle of the neck contains two channels combining in the MR system to be in quadrature. The flexible anterior bib and conformal base bring the patient closer to the coil electronics resulting in higher SNR. The conventional approach to neck imaging is the use of a coil designed to survey the entire spine. The inevitable result with these large cov-erage arrays is lower SNR in any specific region of anatomy, the C-spine included, and possible artifacts in fast spin echo sequences. Call for Details - 866.646.3349

Trauma Neck Coil Array

This Trauma Neck Array was developed to image the cervical spine and soft tissues of the neck while the neck is immobilized in a MRI compatible cervical collar or halo. The Trauma Neck Array allows the patient to be imaged with the collar in place and no pressure points from rigid coil geometry. The patient does not have to be removed from a flat board. The array consists of two channels - one channel in the anterior and one in the posterior. The flexible anterior and posterior halves allow the coils to be positioned closer to the patient resulting in higher SNR. Call for Details - 866.646.3349

Tesla Guard

Patient Vital Signs Monitor for MRIThe Tesla Guard MRI Patient Vital Signs Monitor offers the capabilities necessary for sophisticated procedures now being done in MRI scannerrooms. It offers a clearly arranged LCD color display with individually adjustable alarm parameter for monitoring NIBP, ECG, SPO2, and IBP.

This monitor can be equipped with an optional SCIO unit formonitoring anesthetic agents and respiration: etCO2, ICO2, AFc, O2, N2O, etHAL, iHAL, etlSO, etENF, iENF, etSEV, etDES, iDES.Automatic Agent IdentificationOptional wireless data transfer to the control room is available.Option IBP 2 You have the possibility to integrate a second IBP channelNumber of Channels 4Battery operating time 180 min.ECG-Leads I, II, III (free selectable) Measuring ranges 15 – 300 Beats/min.SpO2 - Measuring ranges 1 – 100 %NIBP Interval length 2,5; 3; 5; 10; 15; 20; 25; 30; 45; 60;120; 240 Min. NIBP Measuring ranges: Adults – 270 mmHg 10 – 250 mmH, Pediatric – 180 mmHg 10 – 170 mmHg, Neonatal – 140 mmHg 10 – 130 mmHgIPB Measuring ranges -50 mmHg to 399 mmHgIntegrated monitoring system for the strength of the magnetic fieldFiber optic sensors, Interference-free images, Main and Battery operation during the MRI examThis product has been certified MRI Safe and Compatible to 3T. when kept at least 4.5 feet from the center of bore. Please see page 4 for details.

Tesla Guard with SCIO

25

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Gravity System Conventional MRI and CT exams scan patients in the recumbent position thus negating the effects of gravity on the spine. The Gravity System is compatible with all commercially available stan-dard MRI and CT systems. It places an axial load on the spine during routine imaging procedures.

This simulates the upright position providing additional valuable information and may reveal occult pathology under weight bearing conditions.

Better Diagnostic Results Competitive Edge Increase Referrals

Easy-To-Use Multiple sizes of vests make it quick and easy to connect the patient to the Gravity System

Custom made springs maintain constant axial load during studies

Load Sensors that are integrated into the foot plate mea-sure force being applied and are accurate to 1/10th pound.

Independent Studies Show the Importance of Weight Bearing MRI. A study entitled:Dynamic Effects on the Lumbar Spinal Canal: Axially Loaded CT-Myelography and MRI in Patients with Sciatica and/or Neurogenic Claudication, Jan Willen, M.D., Ph.D.; Barbro Danielson, M.D., Ph.D.; Arne Gaulitz, M.D.; Thomas Niklason; Nils Schonstrom, M.D.,Ph.D; Tommy Hansson, M.D., Ph.D., Spine 1997,Volume 22, Number 24, pp 2968 - 76. demonstrates:79% of patients experienced a significant reduction of the dural sac cross-sectional area during axial compression 35% of patients passed the borderlines for relative (100mm2) or absolute stenosis (75mm2) 36% of patients experienced deformation of the dural sac during axial compression 13% of patients experienced a narrowing of the lateral recess during axial compression

This study recommends axial loading of the lumbar spine in computed tomographic scanning and magnetic reso-nance imaging and concludes that the diagnostic specificity of spinal stenosis will increase considerably when a patient is subject to axial load.

A Study at the 2002 American Society of Neuroradiology (ASNR) 40th Annual Meeting and Symposium,presented by S. Khan, J.F. Hemmer, W.K. Earley, J.F. Seeger of the University of Arizona Health Science Center, showed33% of the patients examined progressed from a non-critical to critical stenosis of the thecal sac with axial loading; there was an AP diameter reduction in 50% of levels in sagittal scans and a cross-sectional area reduction in 64% of the axial scans at all disc levels imaged; 25% of patients with one critical stenotic level developed a second criti-cal stenotic level under axial loading; previously undetected synovial cysts of diverticulae developed at 20 levels during axial loading of 50 patients. Item Number Description 03-PGS-01 Magmedix Gravity System

proc

edur

es e

quip

men

t

26

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MRI Surgical Instruments

03-90002 Hartman Forceps, Straight, 100mm

03-90003 Crile Forceps, Straight, 140mm

03-90005 O’Shaugnessy Forceps, Curved, 180mm

03-90006 Kocher Forceps, Straight, 200mm

03-90007 Heiss Clamping Forceps, Titanium, Curved, 210mm

03-90008 Metzenbaum Scissors, Titanium, Straight, 150mm

03-90009 Metzenbaum Scissors, Titanium, Curved, 150mm

03-90010 Titanium Suture Scissors, 140mm

03-90011 Titanium Mayo Scissors, Straight, 150mm

03-90012 Titanium Mayo Scissors, Curved, 150mm

03-90014 Titanium Mayo-Hegar Needle Holder, 160mm

03-90015 Titanium Castroviejo Heedle Holder, 160mm

03-90013 Titanium DeBakey Needle Holder, 150mm

03-90004 Crile Forceps, Curved, 140mm

03-90000 MRT Scalpel, nr. 21,160mm

proc

edur

es e

quip

men

t

proc

edur

es e

quip

men

t

27

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Accusorb MRI RF Shielding Material

Item Number: Description: 03-MAC7001 RF Shielding Blanket (36" x 36") 03-MAC7002 RF Shielding Arm Sleeve (20" x 22") 03-MAC7003 RF Shielding Knee Strap Set (23" x 5") (pair)03-MAC7005 RF Shielding Small Torso/ Leg Wrap (24" x 30") 03-MAC7007 RF Shielding Breast Shield (34” x 14”) 03-MAC7008 RF Shielding Boot 03-MAC7009 RF Shielding Leg Wrap Blanket (20” x 20”) Wrist with Accusorb RF shielding

Fabric offers more than -80dB isolation in transmission from below 50 MHz to over 100 GHz and -15dB in absorp-tion from 1 to 18 GHz. Resultant suppression of artifact images allows for enhanced resolution with the added benefit of reduced RF exposure. This device is lead free and offers no X-Ray protection.

For the Patient: More Comfort due to more Natural Positioning Less starts and stops to upset the patient. Less time in scanner. For the Technologist: Available in Application Driven Sizes and Shapes Initial setup results in a final image. Less patient manipulation to get a final result. Less patient complaints. Results in scans otherwise technically difficult to accomplish. “No Phase Wrap Option” not required for most scans.

For the Radiologist: Images are Right the First Time. Saves time. Less manipulation of images & faster to read. Improved image quality. Better productivity.

For the MRI Manager Cost is “Pennies” Per Scan. Material lasts for years. More patient throughput. Lower cost per scan. Better profitability. Elimination of Artifacts By use of the MRI GradeIsolation Device, unwanted artifacts are eliminated from the target scan allowing for enhanced resolution and improved diagnostic capabilities.

Without Accusorb RF Blanket With Accusorb RF Blanket

Scans are courtesy of Champlain Valley Physicians Hospital, Plattsburg, NY and Children’s Hospital of Boston, MA.

Safety Note: This material is not intended for use on patients with metallic, electronic,magnetic or mechanical im-plants, devices or objects.This material blocks RF. It does not block Electromagnetic Energy.This material will not protect or shield an implant, device, or product during a scan.This material is to be used only to shield parts of the anatomy of patients who do not have implants.If a patient is not safe in the MRI scanner without this material the patient will not be safe in the MRI with this material.

"For extremities, the use of the Accusorb Blanket is absolutely necessary if using 3T. More than ever, even more so than for the 1.5T, when using the 3T for extremities, the Accusorb RF Blanket is an answer to our prayers. Time is cut down dramaticaly!!! Time saved is more than just signifi-cant."Kenvin Dewey (R) (RT)Childrens Hospital, Boston

28

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Sat PadsSat Pad is a MRI image enhancement device somewhat analogous to the x-ray bolus device that has historically been used to improve image quality in radiographs. The Sat Pad is filled with a non-protonated fluid which has a magnetic susceptibility to that of water containing tissue.The Sat Pad is designed to improve the homogenenity of the local magnetic field, thereby improving images from such pulsing parameters as chemical shift fat saturation and gradient echo imaging. The pads are designed to be positioned against the patient's skin in the anatomical area of interest, thus eliminating the air/tissue interfaces. For more information please call 866.646.3349

proc

edur

es e

quip

men

t

Smart Tourniquet

Thigh compression with blood pressure cuffs is used to slow arterial flow, increase arterial signal-to-noise ratio and reduce venous contamination on 3D gadolinium-enhanced bolus chase peripheral MR angiography.

A set of high quality thigh blood pressure cuffs for use in the MRI environment. Each SmartTourniquet kit contains two each of thigh cuffs, extension tubing, and a manometer.

Item Number: Description: 03-TS20 Smart Tourniquet

• Non-Magnetic Fiber Optic Handle with battery & bulb

• Full Assortment of Blades available.

Item Number: Description:03-310001 Non-Magnetic Laryngoscope handle standard with battery and bulb03-310010 2 Low Magnetic Field Batteries03-310011 2 Pk Bulbs

Available Non-Magnetic Blades:AM MAC: 0, 1, 2, 3, 3.5, 4ENG MAC: 1, 2, 3, 4MILLER: 0, 1, 2, 3, 4

Do not use blades in any handle that is not marked “MRI Tested or MRI Safe”

Laryngoscope

Sat Pads Breast Imaging Kits Sat Pad Breast Imaging Kits were developed to deal with specific problems associated with Fat Sat and Contrast Issues in Breast Imaging. Kits have been developed for 4 channel, 7 channel, and 8 channel coils. They will attenuate field distortions caused by sharp angled anatomies such as breast and chest walls when performing breast imaging. There is an 8-channel kit that contains an Accusorb MRI ExtremityShielding blanket that was designed to rid image artifactsthat may show in the Sagittal and Transverse view.

See page 53 for more detail

patie

nt tr

ansp

ort

29

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Wheelchairs . . . . . . . . . . . . . . . . . . . . . . 30

Transport Board . . . . . . . . . . . . . . . . . . . 30

Fixed Stretcher . . . . . . . . . . . . . . . . . . . . 31

Folding Stretcher . . . . . . . . . . . . . . . . . . 31

RollBord . . . . . . . . . . . . . . . . . . . . . . . . . 31

Transport Stretcher . . . . . . . . . . . . . . . .32

Transport Gurneys . . . . . . . . . . . . . . . .32

Non-Ferromagnetic Transport Chair. . . . 33

Non-Ferromagnetic Stretcher. . . . . . . .. .33

MRI Walker . . . . . . . . . . . . . . . . . . . . . .33 PVC Stretchers. . . . . . . . . . . . . . . . . . . . 34

PVC Transport Chair . . . . . . . . . . . . . . . 34

Transport Recliner . . . . . . . . . . . . . . . . . 34


patie

nt tr

ansp

ort

30

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MRI Wheelchair with I.V. PoleEven if you have a wheelchair for your MRI, take a moment to think about patient transport. Having more than 1 non-magnetic wheelchair allows you to speed up scanning schedules. This wheelchair is specifically designed for use in the MRI, and with MR prominently displayed on the back, it is not likely that this chair will end up in other departments. The IV pole and cylinder holder on the back make this chair less apt to being folded up and removed from the premises.

Specifications: • 18" Wide Wheelchair 250-pound capacity • Flip-Up Footplates with Heel Straps • Stainless steel I.V. pole and E cylinder holder are standard • 8" front casters with precision bearings • Durable, lightweight 18 gauge, 304 grade stainless steel frame • Rustproof hand-rims and side panels • Lightweight 24" wheels with quality wheel-bearings offer a smooth ride • Retractable wheel locks • Quick release safety belt • Burgundy nylon upholstery with MR prominently printed on back • Storage pocket on back of chair • Comes standard with IV pole and cylinder holder • 22" Wide Wheel Chair has 350 pound capacity to accommodate larger patients • 26" Wide Wheelchair has 550 pound capacity, Dual Underseat Crossbraces, Solid Seat Insert, 24" Composite Mag Wheels, Heavy Duty Double Embossed Upholstery, Removable Desk Length Arms, Detachable Footplates

Item Number: Description: 03-FF27 Non-Magnetic 18" Wheelchair 03-SD27 Non-Magnetic 22" Wheelchair 03-FS27 Non-Magnetic 26" Wheelchair 03-20SS Combo IV Pole and Cylinder Holder 03-21SS Cylinder Holder for Wheelchair 03-09SS IV Pole for Wheelchair 26" Wide

18" & 22" Wide

Patient Transport BoardOur patient slider board makes moving an injured or otherwise incapacitated patient from a stretcher to the imaging table easier and reduces patient discomfort.

• 71” x 231/2”• Weight 14 lb.• Constructed of high density polyethylene• Cleans easily

Item Number: Description:03-PTB62 Body Board For Patient Transfer

Please visit magmedix.com or call 866.646.3349, toll free, for a full range of replacement parts.

patie

nt tr

ansp

ort

31

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MRI Fixed Stretchers

Specifications:

• All welded enamelled Aluminum Frame

• I.V. Sockets (I.V. pole ordered separately)

• Table top: 72"L x 24" W

• Overall: 74.5" L x 27.75" W x 34" H

• 5" casters (independently locking)

• Maximum patient weight of 500 lbs. • Stretcher can also be ordered with an elevating headrest

Item Number: Description: 03-PH1004 MRI Fixed Stretcher 03-PH1005 Fixed Stretcher with Elevating Headrest 03-PHPOLE IV Pole for Fixed Stretcher

MRI Folding Stretchers• Sturdy, lightweight aluminum construction

• Swing-down side rails

• Telescoping head-end main frame section

• Adjustable backrest 0° to 75°

• Lead handles at both ends

• 5” swivel casters with locks

• Patient Restraint System

• Full-length bolster mattress

• Six (6) levels of height adjustment

• Length: Max 76” (194cm) min 64 1/2” (164cm)

• Width: 23” (58cm)

• Height: Max 32 1/4” (82cm) min 12” (31cm)

• Weight: 66 Ibs. (29kg)

• Load Capacity: 400 Ibs (182kg) / Heavy Duty is 500 lbs

(1058kg)Item Number: Description: 03-PH1001 MRI Folding Stretcher 03-PH1002 Heavy Duty Folding Stretcher03-513-10 IV Pole for Folding Stretcher

MRI Rollbord

Magmedix' Rollbord is a soft and lightweight patient transfer device that contains no metal rollers. The anti-bacterial treated surface and disposable cover sheet help to achieve maximum infection control. The Rollbord is an important part of any Safe Patient Handling program.

No Rollers! No Lifting • No Noise • Soft & Comfortable • Anti-Microbial, Anti-Static Material

Lateral Transfer without lifting: No lifting required, staff back injury is reduced. The results can be savings on both workers compensation and insurance.Patient rides on a comfortable surface with far less risk of skin tears, injury, bruising and agitation associated with transfers on slide sheets.

Our Unique Conveyor Belt action carries patient from surface to surface, powered only by a gentle “push”Disposable cover sheets are inexpensive and protect Rollbord from soiling and provide an additional layer of infection control. Rollbord folds in half and can hang on a wall hook for easy storage.Please see page 65 for details, or for more information call 866.646.3349

32

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MRI Transport Stretcher

Safe for use in and around the MRI Suite Constructed of Stainless Steel Swing Down Side Rails Manual Fowler Back - Six Position 2” Hinged Litter Pad I.V. Pole 4 - Individual Locking Casters Weight Capacity 325 lbs. Height Floor to Top of Litter Pad 33” Weight of Stretcher 175 lbs.

MRI Transport Gurney w/Adustable Backrest This gurney is manufactured using non-magnetic materials and is an excellent stretcher for use in the MRI. Light weight aluminum, stainless steel, rubber and composite materials are used to construct this durable product. All exposed corners are protected by durable rubber bumpers. It is easy to use and capable of handling patients up to 500 pounds.Finished with an industrial off white powder coated finish, the gurney comes with retractable guard rails, restraining straps and a 1 ” pad. Large 5” locking swivel and rotating casters allow you to roll the patient easily and position them securely when locked.Locking side rails Casters: 4 - 5” non-magnetic locking casters Backrest raises 6 positions at 14 degrees increments up to 70 degrees

Item Number: Description: 03-PH1020 MRI Stretcher

Item Number: Description: 03-PH1011 MRI Gurney - with Adjustable Headrest 03-PH1012IV IV Pole for MRI Gurney 03-PH1011 / 03-PH1010

MRI Gurney This gurney is manufactured using non-magnetic materials and is an excellent heavy duty stretcher for use in the MRI. All exposed corners are protected by durable rubber bumpers. This gurney is easy to use and capable of handling patients up to 500 pounds.Finished with an industrial off white powder coated finish, the gurney comes with retractable guard rails, restraining straps and a 1 ” pad. Large 5” locking swivel and rotating casters allow you to roll the patient easily and position them securely when locked.Locking side rails Casters: 4 - 5” locking casters

Item Number: Description: 03-PH1010 MRI Gurney 03-PH1012IV IV Pole for MRI Gurney 03-PH1010/03-PH1011

patie

nt tr

ansp

ort

33

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



patie

nt tr

ansp

ort

This MRI Transport Chair is non-ferrous for use in the MRI suite with the Ferralert Halo - Ferromagnetic Detection System. This non-magnetic transport chair has been tested and certified by Kopp Development to present no magnetic signature. Specifications: 20” Wide Wheelchair 300-pound capacity Removable Footrests 8” front and rear wheels with precision bearings Durable, lightweight aluminum frame Quick release safety belt Storage Pocket on back Will not set off Ferromagnetic systems.

Non-Ferromagnetic Transport Chair

Item Number: Description: 03-FER-FF28 Non-Ferromagnetic 20” Transport Chair

Non-Ferromagnetic Stretcher

MRI WalkerThese MRI walkers are specifically suited for use in MRI rooms. MR Conditional to 3 Tesla

Adult Walker 32” to 36” Tall, 18” Wide, 17” Deep, 250 lb Weight Capacity

Junior Walker - 28” to 32” Tall, 18” Wide, 17” Deep, 250 lb Weight Capacity

Bariatric Heavy Duty / Extra Wide Walker - 32” to 38 1/2” Tall, 24” Wide, 21” Deep, 500 lb Weight Capacity

Item Number: Description:03-WALK1000 Adult walker 03-WALK1001 Junior Walker 03-WALK1002 Extra Wide Walker

*MRI Safe, Non-Magnetic, Non-Ferrous Fixed Stretcher.

*Designed for use with all MRI Ferromagnetic Detection Systems.

*Rugged, Lightweight, Uni-table, welded construction

*All materials are aluminum or aluminum alloy

*For ease of use, handrails are a swing-up, cantilevered, self-locking design.

*Maximum patient weight capacity of 500 lbs.

Will not set off Ferromagnetic sysytems.

Item Number: Description:03-FER-STRET Non-Ferromagnetic Stretcher

• Orthopedically designed, contoured cushions covered with anti-bacterial, stain-resistant fabric.• 24” seat height• 21” between arms.• 350 lb capacity• Backrest reclines in 6 positions.• 6-position leg-rest • Heavy-duty 4” swivel casters.

34

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



PVC Stretcher/Gurney These stretchers are made of furniture grade PVC piping, with non-magnetic casters and glued joints reinforced with non-magnetic stainless steel screws.

• 77 1/2” L x 33 1/2” W x 35” H overall • 27"H at patient table • 450 lb. capacity • Weight 72 lbs. • Drop side rails for patient safety • Heavy-duty locking casters• Optional Mattress available

Item Number: Description:03-TSG700 PVC Fixed Stretcher/Gurney, large (left)03-TSG700A PVC Fixed Stretcher/Gurney with Head/ Shoulder Raiser, large03-USGPAD Mattress Pad for 03-TSG700

Bariatric Stretcher • 850 lbs. capacity •1 1/2" PVC for added strength • Waterproof foam pad • 8 heavy-duty 5" casters (4 locking) • Drop side rails •78" L x 34 1/2" W x 35" H overall •27"H at patient table •Wt. 112 lb's., ship wt. 144 lb's.

Item Number: Description:03-BSG1500 Bariatric Stretcher (shown right)

Item Number: Description:03-TC450 PVC Transport Chair

Mobile Recliner For Large Patients

A product you can trust for the larger patient. Made from PVC construction, this model is tough, durable and easy to clean.

Item Number: Description:03-RC70 Mobile Recliner for large patients

Large Stretcher

•34” high x 23” wide x 25” deep•20” between the arms•Seat Height 20”•300 lb. Capacity•Weight 30 lb.•Contoured plastic seat•Dual level slideout footrest•Optional Seatrest

Transport Chair

patie

nt tr

ansp

ort

utili

ty fu

rnitu

re

35

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Instrument Tables. . . . . . . . . . . . . . . . . 36

Kick Bucket . . . . . . . . . . . . . . . . . . . . . 36

Heavy Duty Step Stool. . . . . . . . . . . . . 36

Step Stools. . . . . . . . . . . . . . . . . . . . . . 37

Padded Stools . . . . . . . . . . . . . . . . . . . 37

Mayo & Solution Stands. . . . . . . . . . . . . 38

Utility Carts. . . . . . . . . . . . . . . . . . . . . . 38

Supply Carts. . . . . . . . . . . . . . . . . . . . . 38


utili

ty fu

rnitu

re

36

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Instrument Tables

Heavy Duty Step Stool

This two (2) step stool has no-slip steps.

Item Number: Description:03-2523 Heavy Duty Step Stool

12 Quart Pail with Non-Magnetic Swivel Casters

Item Number: Description:03-SS8350 Non-Magnetic Kickbucket

Kickbucket

This MRI Safe Instrument Table has a top that is hemmed over a full length sub top which sound deadens the table and eliminates channels that may collect dirt. Legs and the H-Brace are fully welded for strength and stability. The table can have 2” non-magnetic casters or rubber tips.


03-SS-42200 Non-Magnetic Instrument Table 36"L x 20"W x 32"H w/ H-Brace and Rubber Tips

03-SS-42100 Non-Magnetic Instrument Table 36"L x 20"W x 32" w/ H-Brace and Casters

03-SS-45200 Non-Magnetic Instrument Table 48"L x 24"W x 32" H w/H-Brace and Rubber Tips

03-SS-45100 Non-Magnetic Instrument Table 48"L x 24"W x 32"H w/H-Brace and Casters

03-SS-46200 Non-Magnetic Instrument Table 60"L x 24"W x 32"H w/H-Brace and Rubber Tips

03-SS-46100 Non-Magnetic Instrument Table 60"Lx 24"W x 32" H w/H-Brace and Casters Please call 866.646.3349 for additional sizes and options

utili

ty fu

rnitu

re

37

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



These non-magnetic MRI stools are equipped with anti skid top surface and rubber tipped legs for patient stabil-ity. Stools assist operator to reach up and over to properly position the patient. The single step stool is available with or without a rail.

Item Number: Description:03-13900 Step Stool without hand rail03-13900-1 Step Stool with hand rail03-41096 Double Step Stool with two 41” hand Rails

Two 41" Hand Rails 33 1/2"W x 12"D x 7" Top Step

33 1/2"W x 24"D x 8 1/2" Bottom Step 36" Overall Width 24" Overall Depth

Step Stools

Step is 8 1/2" off floor Step surface is 12"x16"

Rated for 300 lbs.

Overall height:41" H

Non-Magnetic MRI Stools and Chairs 03-CHM8030 MRI Stool w/ Rubber Tips, No Back, No Arms, Adjustable Height 15” to 21”, 14” Diameter Seat, 4” Thick Padding

03-CHM8031 MRI Stool w/ Rubber Tips, With Back, No Arms, Adjustable Height 15” to 21”, 14” Diameter Seat, 4” Thick Padding

03-CHM8032 MRI Stool w/ Rubber Tips, With Back and Arms, Adjustable Height 15” to 21”, 14” Diameter Seat, 4” Thick Padding

03-CHM8033 MRI Stool w/ Rubber Tips, No Back, No Arms, Adjustable Height 21 “ to 27”, 14” Diameter Seat, 4” Thick Padding

03-CHM8034 MRI Stool w/ Rubber Tips, With Back, No Arms, Adjustable Height 21 “ to 27”, 14” Diameter Seat, 4” Thick Padding

03-CHM8035 MRI Stool w/ Rubber Tips, With Back and Arms, Adjustable Height 21 “ to 27”, 14” Diameter Seat, 4” Thick Padding

03-CHM8036 MRI Stool w/Five (5) 2” Casters, No Back, No Arms, Adjustable Height 16” to 22”, 14” Diameter Seat, 4” Padding

03-CHM8037 MRI Stool w/Five (5) 2” Casters, With Back, No Arms, Adjustable Height 16” to 22”, 14” Diameter Seat, 4” Padding

03-CHM8038 MRI Stool w/Five (5) 2” Casters, With Back and Arms, Adjustable Height 16” to 22”, 14” Diameter Seat, 4” Padding

03-CHM8039 MRI Stool w/Five (5) 2” Casters, No Back, No Arms, Adjustable Height 22” to 28”, 14” Diameter Seat, 4” Padding

03-CHM8040 MRI Stool w/Five (5) 2” Casters, With Back, No Arms, Adjustable Height 22” to 28”, 14” Diameter Seat, 4” Padding

03-CHM8041 MRI Stool w/Five (5) 2” Casters, With Back and Arms, Adjustable Height 22” to 28”, 14” Diameter Seat, 4” Padding

utili

ty fu

rnitu

re

38

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Mayo & Solution Stands

Item Number: Description: 03-SS8366 Non-Magnetic Single Basin Solution Stand w/H-Brace and Casters (not shown)03-SS8365 Non-Magnetic Single Basin Solution Stand w/Shelf and Casters

03-SS8319 Non-Magnetic Mayo Stand (large) 16" x 21" Tray w/Casters 03-SS8318 Non-Magnetic Mayo Stand (small) 13" x 19" Tray w/Casters

15” L x 15-1/4” W x 33” H2" Non-Magnetic Swivel Casters Large

Tray - 16" L x 21" WExtends 33" - 58" H

SmallTray - 13" L x 19" WExtends 33" - 58" H

Utility Carts Item Number: Description:03-UTC55 18” x 31” Cart, 37 1/2” high, 300 lb. capacity (Shown, right)03-UTC00 16” x 30” Cart, 32 1/4” high, 400 lb. capacity (Shown, left)03-UTC97 16” x 30” Cart, Middle Shelf Fits 03-UTC0003-UTC20 24” x 36” Cart, 32 1/4” high, 400 lb. capacity (Shown, left)03-UTC98 24” x 36” Cart, Middle Shelf, Fits 03-UTC20

Supply CartsConveniently store your supplies in this useful, transparent, organiz-ing system on wheels. Constructed of high quality PVC and polypro-pylene. 3" easy-roll casters (2 are locking).

Item Nubmer: Description: 03-CNAC31 44” High PVC Supply Cart03-MDPC 6 Drawer PVC Multi-Purpose Supply Cart

cart is 44"H x 26"W x 16"D 3 large supply drawers (each is 7"H x 19"W x 14"D) Bottom storage shelf is 26" x 16"

cart is 60" H x 26”W x 16”D 6 large supply drawers

(each is 7"H x 19"W x 14"D)

safe

ty a

cces

sorie

s

39

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616

.


Water Mist Fire Extinguisher . . . . . . . . .40

Lighted “Magnet Is Always On” Sign . . 40

Hand Held Test Magnet . . . . . . . . . . . . 40

Stanchion & Chain. . . . . . . . . . . . . . . . 41

Ear Plugs . . . . . . . . . . . . . . . . . . . . . . . 41

Oxygen Monitor . . . . . . . . . . . . . . . . . . 41

Hand Held Metal Detector . . . . . . . . . . 41

Danger/Warning Signs. . . . . . . . . . . . . 42

Danger Sign Floor Mat . . . . . . . . . . . . 42

Swinging Stop Sign . . . . . . . . . . . . . . . 43

Name Tag Holder . . . . . . . . . . . . . . . . . 43

Safety Reference Manual . . . . . . . . . . 43

Safety DVDs. . . . . . . . . . . . . . . . . . . . . 43

FerrAlert Ferromagnetic . . . . . . . . . . . . 44Detection System

Walk -Through Metal Detector. . . . . . . . 45

Screening Forms . . . . . . . . . .. . . . . . . .46

Reference Manual . . . . . . . . . . . . . . . . 46

Simply Physics . . . . . . . . . . . . . . . . . . .46

Educational Seminars . . . . . . . . . . . .47-48


Handheld Test Magnet

Magmedix' heavy-duty horseshoe magnet is ideal for checking the gross magnetism of items before they are introduced into the MRI suite. It is recommended that everything be checked with a handheld magnet to avoid possible dangers in the MRI scan room.With this 22lb. lift magnet that is easily accomplished.

Magnets must be used outside of the scan room and away from your MRI's magnetic field.

Magnet: 1" L x 1" H x 1.5" D Keeper:1" L x 1.5" H x .125" T Handle: 8", Overall Length: 9.25" Item Number: Description: 03-30381-72 Test magnet, 22 lb. pull

safe

ty a

cces

sorie

s

40

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Magmedix recommends at least one extinguisher be placed in the magnet room and the control room.

In addition, we strongly advise that all fire extinguish-ers in the general area of the MRI be replaced with non-magnetic extinguishers to reduce or eliminate the possibility of a magnetic cylinder being brought into the MRI.

Your MRI Magnet Is On 24 / 7. The magnetic fields generated by the vast majority of clinical MRI systems are always on.Although the scanner may not be in use, high magnet-ic fields are always present. Therefore it is essential to alert everyone to this fact and maintain safety stan-dards around the clock in the magnet room.

This lighted sign is an important warning to everyone including emergency rescue personnel and others who may not be familiar with the dangers associated with MRI.

Light can be hardwired into the emergency lighting system to provide the necessary warnings even when the electricity goes out or fitted with a standard plug. Professional installation required.

Sign is double-sided and can be mounted perpendicu-lar to the wall above a door so that it can be seen from both directions in a corridor, or mounted flat above a door.Please Note: This sign must remain outside of the scan room and away from your MRI's magnetic field. Sign measures 7" x 11 ½" x 2 ½"

Item Number: Description:03-900MR MRI Magnet Is On sign

Lighted MRI Sign

Environmentally Friendly: • No O.D.P.• No EPA phase out or restrictions • No global warming concernsClean: • No toxicity • No respiratory concerns • De-ionized water extinguishing agent • Antiseptic white paint finish (easy to clean interior and exterior) • No powder residue User Friendly: • Polymeric wand provides greatest operator safety • Maximum visibility during discharge • UL listed with 2A;C rating -ultra low agent conductivity (1 microsiemen/cm maximum) • No thermal or static shock • Minimal training - simplest to use WATER MIST is the ultimate extinguisher for Class A fires and where a potential Class C (electrical) hazard exists. The fine spray from the unique misting nozzle provides safety from electrical shock, greatly enhances the cooling and soaking characteristics of the agent and reduces scattering of the burning materials. Non-magnetic pull pin and wall hanger are included for use around MRI scanners.

Item Number: Description:03-B-270NM 1.75 gallon water mist extinguisher03-B-272NM 2.5 gallon water mist extinguisher

Non-Magnetic Water Mist Extiguisher

Designed for simplicity in installation and use, this ambient Oxygen Monitor plugs into any 120 VAC wall outletfor instant area monitoring in the MRI suite.

A cryogen leak in the MRI suite can be very dangerous. Even though the gas itself is not toxic, it can displace oxygen in the air and cause asphyxiation before the people in the room are aware of what is happening. OHSA has determined that "oxygen levels [in the air] below 19.5% are inadequate for an entrant's respiratory needs... Victims of asphyxiation often are unaware of their predicament until they are incapable of saving themselves or even calling for help." Should the level of oxygen in the room drop below 19.5%, the monitor sounds an alarm. Size: 7.2" X 5.6" X 1.6" (18.29cm X 14.22cm X 4.06cm)

Please note: Oxygen monitor’s power-pack is magnetic and must be kept a safe distance from the MRI magnet.

Please see website or call Magmedix for Engineering specifications for Ambient Oxygen Monitor:

Item Number Description:03-M02 Oxygen Monitor03-0129 Replacement Sensor03-67001198 Optional Vanity Cover03-7701 24VDC Low Power Red Strobe Audio and Visual Alarm

safe

ty a

cces

sorie

s

41

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Non-Magnetic Stanchions & Chain KitSafely cordon off your magnetic field with non-magnetic stanchions. Stanchions may be placed up to 10 feet apart. For use with #8 Size Chain. Stanchion 40 high, 2 1/2" Diameter.Base is 14" Kit contains 6 stanchions and 50' chain.

Item Number: Description: 03-SA1000 Stanchion / Chain Kit

These safe comfortable earplugs will help relax your patient during MRI scanning. Earplugs are packaged separately in pairs and supplied in dis-penser boxes for easy access. Available with or without cord, one (1) box contains 200 pairs.

Item Number: Description:03-JB-7031 Earplugs without Cord03-JB-7032 Earplugs with Cord

Ear Plugs

Ambient Oxygen Monitor

Hand Held Metal DetectorThe PD140 portable Metal Detector is a device designed to detect metal objects or masses carried by people. See page 58 for full details.

safe

ty a

cces

sorie

s

42

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Here's safety protection and final reminders for operators, doctors, patients and hospital staff.

Safety signs mounted at an entrance to the magnet room itself alert everyone who enters that loose metallic objects may become danger-ous projectiles.Don't let your safety warnings get left behind thedoor. If your door opens against the wall, consider posting signs on each side of the door, to ensure your danger signs are visible, whetherthe door is open or shut.

Regarding Controlled Access for MR Facilities and the Use of Signs, please be advised of the following: According to the U. S. Department Of Health and Human Services Center for Devices and Radiological Health Food and Drug Administration, the document entitled, Guidance for the Submission Of Premarket Notifications for Magnetic Resonance Diagnostic Devices (November 14, 1998) Attachment B, Recommended User Instructions for a Magnetic Resonance Diagnostic Device, section B. 5 Controlled Access Area states: "The controlled access area should be labeled "Danger - High Magnetic Field" at all entries. Operators should be warned by appropriate signs about the presence of magnetic fields and their force and torque on magnetic materials, and that loose ferrous objects should be excluded.”

Alert everyone to the dangers inherent to the MRI scan room before they enter. This novel 3ft x 5ft floor mat is very hard to miss.Constructed of extremely durable, static dissipative nylon yarn.Fibers are woven into the backing - not glued for increased durability.These floor mats can be commercially laundered or even hosed down and vacuumed.Suitable for most outside covered entryways and any indoor areas.Floor mats are fully backed with rubber for non-skid stability.Graphics are guaranteed not to fade for 11 years.

Item Number: Description: 03-E8830 Floor Danger Sign


03-E8819B MRI Danger Sign 12" x 19" in English 03-E8819C MRI Danger Sign 12” x 19” In Spanish 03-E8840B Restricted Access Sign 12’’ x 19” in English 03-decal 4" X 10" decal03-E8820C 4" x 10" Spanish Door Frame Sign03-E8820B 4" x 10" English Door Frame Sign

03-E8819B 03-E8840B

03-E8820B

MRI Danger Signs & Decals

MRI Danger Sign Carpet

03-E8820C

03-E8819C

DVD Safety Training Programs

safe

ty a

cces

sorie

s

43

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



The Safety Stop Sign was created to prevent accidental entry and/or equipment entry into the MRI field that could cause potential damage and injury. The Safety Stop Sign installs in the door jam as a final barrier to the MRI field. The sign swings in an in and out fashion, and always swings back to a closed position. The sign fits in a stan-dard 48" door opening and is made of acrylic. The Safety Stop Sign can be customized to fit most door sizes and is available in Spanish and English. The sign is 42 inches in height and 48inches in width.

Item Number: Description: 03-E8850B Safety Stop Sign

Non-Magnetic Safety Stop Sign

MRI Name Tag HoldersSafely wear your nametag on a totally nylon and plastic lanyard. These 3/4” wide Breakaway lanyards are maroon in color. The 38” long flat woven nylon lanyard comes complete with a hook and a vertical top load name badge holder. This holder will accommodate badges up to 2 1/8” x 3” badges.

Item Number: 03-2WHI-4000Description: MRI Nametag Holder * Available in units of 10.

MR Safety for Non-ProfessionalsDr. Frank Shellock, PhDTargeted to individuals who may need to enter the MRI environment on a pe-riodic or limited basis or in response to an emergency. These individuals may include office workers, custodial staff, transportation personnel, nurses, anes-thesiologists, security officers, firefighters, site maintenance workers, as well as relatives and visitors of patients. MR: Quench Your Thirst for MR Safety Dr. Frank Shellock, PhD and Daniel J. Schaefer, PhD Targeted to technologists and medical personnel working in the MRI environment. This program reviews present safety guidelines and recommendations, the latest information for implants and devices used in MRI and the safety considerations for clinical use of 3.0 Tesla (T) systems and higher. An actual quench is also demonstrated. What to Expect During Your MRI Exam Targeted to patients. Walks through a typical MRI exam and what the patient can expect during this procedure. Item Number: Description: 03-GE-DVD001 MR Safety for Non-Professionals DVD Program - with Spanish & French subtitles 03-GE-DVD002 MR:Quench Your Thirst for MR Safety - English Only 03-GE-DVD003 What to Expect During Your MRI Exam - with Spanish & French subtitles 03-GE-DVD004 DVD Combo Pack - MR Safety for Non-Professionals, MR:Quench Your Thirst for MR Safety, What to Expect from you MRI Exam

44

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



FerrAlert Halo - Ferromagnetic Detection System

safe

ty a

cces

sorie

s

Normal MRI Picture / MRI Picture w/Ferrous Hair Clip

The location of the ferromag-netic object in the Sensor Portal is indicated by the illumination of the group of 4 or more am-ber LED’s closest to the ferrous object. For example as shown in the picture above if the second from the top, left and right groups of LED’s (amber) are activated, the ferromagnetic object is near the center of the portal at head level. If multiple groups of amber LED’s are il-luminated, a number of sensors have been activated.

FerrAlert Halo System: The FerrAlert Halo System consists of FerrAlert Halo PreScreen and FerrAlert Halo Entry to supplement current screening procedures. This combination ensures the most comprehensive way to reduce the risk of injuries, mortality, quenches, and damage to the magnet. Each part of the System (PreScreen or Entry) can be purchased separately. Unlike other types of detectors, the FerrAlert System emits no electromagneticradiation to detect objects. Titanium. plastic, wood, copper, aluminum and all other non-magnetic materials not attracted to the magnet will be ignored.

FERRALERT Prescreen: The FerrAlert Halo PreScreen is set to a very high sensitivity to detect objects as small as a hairpin. This unit is typically placed in a dressing room or theinterview/screening area. It requires no breach of the patient or staff intimatepersonal space. If an object is detected the operator will be Alerted by a visualand audio alarm.

FERRALERT Entry FerrAlert Halo Entry: The FerrAlert Halo Entry is used to detect items as small as a pocket knife that may be brought into the scanning room.

REDUCES THE RISK OF INJURIES AND DEATH Although existing safety recommendations to prevent accidents are compre-hensive, human error still occurs, resulting in injuries or even death to patients,staff and visitors. With increasing magnet field strength and steeper field gra-dients, the risks are increasing

PREVENTS QUENCHES AND RAMP DOWNS Quenches can cost up to $500,000 in service and repair cost per occurrence. Lost income during magnet downtime can result in additional $ 200,000

REDUCES OPERATING COSTS FERRALERT™ yields a rapid return on investment and pays for itself by prevention of damage to a magnet as well as support equipment. Imaging downtime can cost $ 1,200 to $ 3,000 an hour. The lost imaging time to re-move a missed cell phone, for example, from a magnet or to remove a patient because of a missed ferrous object can add up over time and easily pay for FERRALERT™

TARGETS ONLY FERROUS OBJECTS Unlike conventional metal detectors which detect many different metals, FERRALERT™ alarms ONLY upon de-tection of ferromagnetic metals, and helps to pinpoint the location of an object. FerrAlerts are avaliable in North Americaand Europe

Item Number: Description: 03-FA1000H FerrAlert Halo Prescreen 03-FA2000H FerrAlert Halo Entry 03-FA3000H FerrAlert Halo Mobile Entry

45

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



These metal detectors are high-performance walk-through metal detectors. They are manufactured in compliance with ISO 9001 quality procedures using the most advanced electronic technology. The unique patented gate design is compact and easy to install while utilizing minimal amounts of space. The exterior polymer coating is extremely durable and water-resistant preventing damage to internal components. The aesthetics of these metal detectors make them the ideal solution for the most demanding architectural environments. The control units are integrated into the structures of the gates and are characterized by high reliability and immunity to electromagnetic interfer-ence.Access to the control units are protected by both a mechanical lock and by two software level passwords.The sensitivity of detection is independent from the speed of transit. This results in a very high flow rate of people through the gate.MAIN FEATURES• Digitally adjustable sensitivity with a wide range of values• All functions programmable and controlled by microprocessor• International Standards: Direct selection of the International Security Standards• Programming access protected by both a mechani-cal lock and by two software level passwords• High speed of detection: up to 15 meters per sec-ond• Very high immunity to electromagnetic and mechanical interference• Automatic synchronization between two or more metal detectors, (at a distance of up to 5 cm from each other), without using cables• Professional high integration and high reliability electronics• Electronic control unit integrated in the archway• No initial or periodic calibration• Easy maintenance. The electronic control unit can be replaced in less than one minute• It is recommended these units be permanently mounted on floor to insure consistent performance and reduce the potential for damage or injury.

03-SMD600S High-Sensitivity Multi-Zone• Overall Width: 32

3/4” Inside Width:26

3/4” Height: 87

1/2”

03-HIPE Standard Security Sensitivity Overall Width:46” Inside Width: 28” Overall Height: 87

1/2”

Alarms:Visual signaling:• High intensity display • Green and red lights• Proportional indication of the size of the metal mass in transitAudible signaling:• High sound intensity • Programmable volume and toneCertification and Conformity• Harmless to pacemakers, life-support systems, pregnant

women and magnetic storage media (diskettes, cassettes and similar)

INSTALLATIoN DATAPower supply• 115*/230 VAC, +15/-25%, 45-65 Hz, 22 VA MAXInputs:• RS-232C interface for the connection with a terminal, a personal

computer or an external modem

Please note: Metal detectors are not intended to detect metal items or implants inside the body.They will not pin-point the location or even determine the presence of metal inside the body. A metal detector cannot differentiate between magnetic and non-magnetic items. Its value lies in its ability to alert the staff to the presence of metal items. It is up to the staff member to determine whether or not the item has magnetic properties.A metal detector plays an important ancillary function. It is not intended to replace vigilance. Nothing replaces a well thought-out and implemented system for safety. A well-educated staff, screening forms, notices to emergency personnel regarding the special challenges of the MRI environment and the use of non-magnetic, MRI suitable products are all essential. A metal detector helps detect items that may go unnoticed by even the most careful professional. Use metal detectors outside of the scan room to screen people and objects to prevent items from entering the magnetic field and becoming a hazard.

Walk Through Metal Detectors

* Note: Metal Detectors are not MRI Safe! Use it outside the mag-net room, before the patient enters.

safe

ty a

cces

sorie

s

46

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MRI Patient & Escort Screening FormsProper use of these written forms along with thorough verbal screening of all patients and individuals entering the MRI suite by an MRI safety trained healthcare worker should prevent accidents and injuries in the MRI environment.

Item Number: Description:03-PSF 2 sided Patient Form (100 ct pad)03-ISF 1 Sided Escort Form (100 ct pad)

03-ISF 03-PSF

Reference Manual for Magnetic Resonance Safety, Implants and Devices 2009

Simply PhysicsMembers of the radiology profession, whether physicians or technologist, are not dummies. Virtually all of them are capable of understanding the real workings of an MRI scanner if it is explained to them properly. Since February 1994 I have been responsible for teaching MR Physics to the residents and technologists at the University of Maryland, Medical Center in Baltimore, Maryland. Alas, I could not find a single textbook that covered all of the important material in what I felt was a clear, conscise yet complete manner. So I developed my own lecture material. To make life easier for my students, I put together handouts that included, on a single page, a pair of 1/4 page reductions of the lecture trans-parencies, a paragraph of explanatory text, definitions, key points and room for notes. The response from my students was over-whelming. It became clear that I just had to turn these handouts into a book. The result is a student-friendly textbook of 130 pages divided into 11 chapters.

Moriel NessAiver, Ph.D. Item Number: Description: 03-B1010 MRI Simply Physics Book

Item Number: 03-MRI2009 Description: Reference Manual 2009 ed.

The Reference Manual for Magnetic Resonance Safety, Implants and Devices: 2009 Edition (650 pages; 10 digit ISBN 0-9746410-5-7, 13-digit ISBN 978-0-9746410-5-8) is an indis-pensable textbook for radiologists, MRI technologists, and facility managers. This interna-tionally acclaimed series includes updated guidelines and recommendations from the latest information in the peer-reviewed literature as well as documents developed by the Inter-national Society for Magnetic Resonance in Medicine (ISMRM), the American College of Radiology (ACR), the Food and Drug Administration (FDA), the National Electrical Manufac-turers Association (NEMA), the International Electrotechnical Commission (IEC), the Medical Devices Agency (MDA), and the Institute for Magnetic Resonance, Safety, Education and Research (IMRSER).

This textbook is a comprehensive yet concise information resource on MR safety and patient management for healthcare professionals.Section I presents safety guidelines and recom-mendations. Section II has the latest information for implants, devices, and materials tested for safety in the MR environment. “The List” has a tabular listing of data for more than 2,200 objects with over 900 implants tested at 3-Tesla. Features of the 2009 Edition include patient screening forms in English and Spanish and guidelines for scanning patients with electronically-activated devices and current generation cardiac pacemakers.

safe

ty a

cces

sorie

s

47

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MRI Education Seminars

IMPRoVE yoUR FACILITy'S REVENUE THRoUGH STAFF EDUCATIoN

• Increased Throughput: Many sites try to increase the number of patients scanned per day by shortening the time allowed for each procedure. While this will accomplish the goal of having more patients on the sched-ule each day, inexperienced or inadequately trained technologists are not able to keep up with the schedule. Obviously, as with large airports and weather delays, once the schedule is delayed, it only gets worse over the course of the day. This only results in angry and frustrated patients. • Repeat Studies: Having to call a patient back for additional sequences impacts the facility in several ways. The most obvious is again dealing with patient satisfaction. The patient is inconvenienced and may well have increased anxiety thinking that something bad was found on the original study. In addition to the patient issues, the final report to the referring physician is delayed creating an additional dissatisfied customer. Lastly, the time slot is lost with regards to a billable procedure.

• New Procedures: As MR technology improves, the number of applications increase. If the technologists are unable to perform the studies, or even worse, perform them poorly, the facility is unable to grow their business. Why spend upwards of 1.5 million dollars on a piece of equipment, and not invest in educating the staff in the efficient use of the system?

Staff Efficiency Can Be Easily Improved Through Education

Single Lecture Topics: •MR Safety •Body MR Techniques •MR Contrast Agents· •Low Field vs. High Field MR •Optimizing Low Field Image Quality •Selecting an MR System •Marketing Your MR Services •Basic MR Principles •MR Image formation •MR Image Contrast •Fast Imaging Techniques •Cardiac MR •MRA (all techniques) •Contrast Enhanced MR •MR Artifacts •Optimizing MR Image Quality •Optimizing MR Throughput Optimizing Neuro MR Imaging •Echo Planar Imaging •MR Pulse Sequences •Overview of MR Spectroscopy •Diffusion/Perfusion Imaging

Multi-hour or Multi-day Topics: •Basic Principles of MRI •MR Registry Review • MR Angiography

Seminars are available in half day or full day formats.

Half Day: consists of up to 4 hours of educational lectures. This may be a single lecture repeated 4 times or several different lecture topics up to 4 hours duration. Each 50-minute lecture topic will be pre-approved for category A credit.If it is desired that the presentation(s) be given over the course of a day such that the speaker is required to be on-site for more than 6 hours, then the full day rate will apply.

Full Day: consists of 5-8 hours of educational lectures. This may be a single or several lectures repeated multiple times or several lecture topics up to 8 hours total A credit. Each 50-minute lecture topic will be pre-approved for category A credit.

ASRT approval will be obtained for all lecture materials and sign -in logs will be obtained per ASRT requirements

Materials will be made available prior to the scheduled lectures in PDF format on CD-ROM, so that handouts can be produced prior to the lecture if desired.

A certificate will be provided to each attendee as proof of attendance.

safe

ty a

cces

sorie

s

48

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MRI Training Seminar

Magnetic Resonance Health Effects and Safety: Update 2010 Presented by Frank G. Shellock, Ph.D., Adjunct Clinical Professor of Radiology Keck School of Medicine University of Southern California. Founder, Institute for Magnetic Resonance Safety, Education, and Research

Half-day course at your facility presents practical information pertaining to MR bioeffects and safety. This semi-nar is of particular value to Radiologists, MRI Technologists, MR Physicists, Other Healthcare Professionals and Workers. A question and answer session will follow the lecture. A review of your facility’s safety procedures is optional. Weekend seminars are available for your convenience.

With the utilization and complexity of magnetic resonance (MR) procedures constantly increasing, safety and patient management issues are progressively more important aspects of this diagnostic modality. In order to avoid incidents and accidents in the MR environment, it is necessary to be vigilant with regard to understanding basic MR safety information as well as to update, revise, and add to safety guidelines and policies in consider-ation of the latest information and technological changes for MR procedures.

The preservation of a safe MR environment requires constant attention by MR healthcare professionals with regard to the management of patients with metallic biomedical implants or devices as the variety and complex-ity of implants and devices constantly changes. The most current and accurate information about these objects relative to the MR environment must be obtained and used. To date, more than 1,100 implants and objects have been tested for MR-safety or MR-compatibility. This course will discuss this information, with an emphasis on those objects that have recently undergone evaluation or that require additional consideration because of existing controversy or confusion.

At the conclusion of this program, participants will be able to:·Describe the basic aspects of magnetic fields used for magnetic resonance (MR) systems ·Describe the bio-effects associated with exposure to the static, gradient, and radiofrequency fields used for MR ·Understand the issues related to acoustic noise ·Implement comprehensive screening procedures to prepare patients for MR procedures and individuals for the MR environment ·Recognize methods to properly control MR system site access ·Identify guidelines to manage pregnant patients referred for MR procedures ·Describe techniques to handle patients with anxiety, emotional distress, or claustrophobia related to MR ·Incorporate into their know-ledge base the latest information related to implants, devices, and other biomedical objects in order to ensure MR safety ·Implement into daily practice various policies to prevent incidents and accidents associated with MR procedures

Topics Presented During Lecture: ·General Information ·Different MR Systems and Issues ·Bioeffects of Static Magnetic Fields ·Prevention of Missile Effect Accidents ·Bioeffects of Gradient Magnetic Fields ·Acoustic Noise and MR Procedures ·Bioeffects of RF Fields ·Site Access Control ·Devices Developed for the MR Environment ·Prevention of Burns in the MR Environment ·Screening: Individuals and Patients ·Tattoos, Permanent Cosmetics, and Eye Makeup ·Metallic Foreign Bodies and Screening ·Metallic Orbital Foreign Bodies and Screening ·Pregnant Patients and MR Procedures ·Pregnant Technologists, Healthcare Workers and the MR Environment ·Post-Op Patients and MR Procedures ·Monitoring Patients in the MR Environment ·Claustrophobia, Anxiety, and Emotional Distress In the MR Environment ·MR Procedures and Implants, Devices, Objects and Materials ·Aneurysm Clips ·Biopsy Needles, Markers, and Devices ·Bone Fusion Stimulator/Spinal Fusion Stimulator ·Breast Tissue Expanders and Implants ·Cardiac Pacemakers and Implantable Cardioverter Defibrillators ·Cardiovascular Catheters and Accessories ·Carotid Artery Vascular Clamps ·Cochlear Implants ·Coils, Stents, and Filters ·Dental Implants, Devices, and Material ·Diaphragms ·ESSURE Device Halo Vests and Cervical Fixation Devices ·Hearing Aids ·Heart Valve Prostheses ·Hemostatic Clips ·Intrauterine Contraceptive Devices ·IsoMeda Implantable Constant-Flow Infusion Pump ·Magnetically Activated Implants and Devices ·Miscellaneous Implants and Devices ·Neurostimulation Systems ·Ocular Implants and Devices ·Orthopedic Implants, Materials, and Devices ·Otologic Implants ·Pellets and Bullets ·Penile Implants ·Retained Cardiac Pacing Wires and Temporary Cardiac Pacing Wires ·SynchroMed® Infusion System ·Transdermal Patches ·Vascular Access Ports, Infusion Pumps, and Catheters ·3-Tesla MR Systems ·Resources for MRI Safety, Bioeffects, and Patient Management.

safe

ty a

cces

sorie

s

49

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



imag

ing

enha

ncem

ent p

rodu

cts

Accusorb RF Shielding Material. . . . . . . 50

Special Procedure Coils. . . . . . . . . . 51-52

ACR Phantom Refill Kit . . . . . . . . . . . . . 52

Sat Pads . . . . . . . . . . . . . . . . . . . . . . . . 53

Sat Pad Breast Imaging Kits. . . . . . . . . . 53


50

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Accusorb MRI RF Shielding Material

imag

ing

enha

ncem

ent p

rodu

cts

Fabric offers more than -80dB isolation in transmission from below 50 MHz to over 100 GHz and -15dB in absorp-tion from 1 to 18 GHz. Resultant suppression of artifact images allows for enhanced resolution with the added benefit of reduced RF exposure. This device is lead free and offers no X-Ray protection.

For the Patient: More Comfort due to more Natural Positioning. Less starts and stops to upset the patient. Less time in scanner. For the Technologist: Available in Application Driven Sizes and Shapes Initial setup results in a final image. Less patient manipulation to get a final result. Less patient complaints. Results in scans otherwise technically difficult to accomplish. “No Phase Wrap Option” not required for most scans.

For the Radiologist: Images are Right the First Time. Saves time. Less manipulation of images & faster to read. Improved image quality. Better productivity.

For the MRI Manager Cost is “Pennies” Per Scan. Material lasts for years. More patient throughput. Lower cost per scan. Better profitability. Elimination of Artifacts By use of the MRI GradeIsolation Device, unwanted artifacts are eliminated from the target scan allowing for enhanced resolution and improved diagnostic capabilities.

Without Accusorb RF Blanket With Accusorb RF Blanket

Scans are courtesy of Champlain Valley Physicians Hospital, Plattsburg, NY and Children’s Hospital of Boston, MA.

Safety Note: This material is not intended for use on patients with metallic, electronic,magnetic or mechanical im-plants, devices or objects.This material blocks RF. It does not block Electromagnetic Energy.This material will not protect or shield an implant, device, or product during a scan.This material is to be used only to shield parts of the anatomy of patients who do not have implants.If a patient is not safe in the MRI scanner without this material the patient will not be safe in the MRI with this material.

"For extremities, the use of the Accusorb Blanket is absolutely necessary if using 3T. More than ever, even more so than for the 1.5T, when using the 3T for extremities, the Accusorb RF Blanket is an answer to our prayers. Time is cut down dramaticaly!!! Time saved is more than just signifi-cant."Kenvin Dewey (R) (RT)Childrens Hospital, Boston

Item Number: Description: 03-MAC7001 RF Shielding Blanket (36" x 36") 03-MAC7002 RF Shielding Arm Sleeve (20" x 22") 03-MAC7003 RF Shielding Knee Strap Set (23" x 5") (pair)03-MAC7005 RF Shielding Small Torso/ Leg Wrap (24" x 30") 03-MAC7007 RF Shielding Breast Shield (34” x 14”) 03-MAC7008 RF Shielding Boot Wrist with Accusorb 03-MAC7009 RF Shielding Leg Wrap (20” x 20”) RF shielding

51

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



imag

ing

enha

ncem

ent p

rodu

ctsSpecial Procedures Coils and Accessories

Special Procedures Head CoilThis Special Procedures Head Coil will serve a number of different imaging functions. The system consists of a basic transmit and receive quadrature coil for standard imaging, radiation therapy planning, pediatric imaging and/or dual tuned spectroscopy.This coil is a 12-element birdcage that is 11 inches in diameter and 11 inch-es between end rings. It splits in half to allow for easier patient access and positioning. Along with larger openings and wide field-of-view mirror, patient anxiety and claustrophobia is reduced.For Details Please Call - 866.646.3349

Elekta Stereotactic Frame PositionerThis stereotactic frame positioner is for use in the Special Procedures HeadCoil. Designed for use with the Leksell® stereotactic head frame, the stereotactic frame positioner addresses drawbacks of other stereotactic head positioners.The positioner is attached inside of the coil, (allowing more mobility of coil positioning and freedom of stereotactic frame positioning) and retains a slide mechanism in conjunction to the MR coil’s slide mecha-nism. This allows the positioner to slide in and out of the coil as well as the coil sliding up and down the table. Now, an inaccurately positioned stereotactic frame will be of little consequence. For Details Please Call 866.646.3349

Thermoplastic Immobilization KitThe Special Procedures Head Coil was designed specifically to accom-modate radiation oncology thermoplastic immobilization masks. Standardsystem head coils do not have the capability. The advantage of this system allows thermoplastic masks to travel freely between MRI, FMRI, CT, PET and radiation treatment. The images can be fused to providemore accurate planning, and better post treatment check-up

assessments.Thermoplastic masks are formed individually for each patient with a hot water bath. The softened material hardens after a few minutes and fiducial markers can be applied. These fiducial markers are visualized in both CT and MRI, and thus accuracy of the planning is improved by fus-ing the data from each study. For Details Please Call 866.646.3349

This stationary cradle positioner combined with a sliding split-top coil com-prises a fresh solution to pediatric MRI. 60 cm of superior-to-inferior cover-age means that a pediatric patient does not have to be moved to image head, torso, and pelvis. Unlike some phased array coils that have poor pen-etration and inhomogeneities, the split top coil will give full, homogeneous image quality in its 28cm FOV.

For Details Please Call 866.646.3349

The Pediatric Positioner used with the Special Procedures Head Coil allows you to image children without moving them.

Pediatric Positioner Covering From Head to Toe

52

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



imag

ing

enha

ncem

ent p

rodu

cts

High Resolution Brain CoilThis high performance Brain Coil was developed to image the anatomy of the head or brain and PROBE spectroscopy with increas-es in SNR. The system consists of a basic transmit and receive quadrature coil with end ring modifications that create clearance for a patient’s nose.The High Resolution Brain coil is a 12-element birdcage with a 9-inch (23cm) diameter and 8-inches (20cm) between end rings. With the addition of a nose notch, the coil can attain 10 inches (25 cm) of clearance from anterior to posterior. The electrical performance of the HR Brain Coil is one nex (up to a 40% increase) better than the GE system head coil in SNR. The coil splits in halves, allowing for easier patient access and positioning. Call for Details - 866.646.3349

Cervical Spine CoilThis C-spine Array was developed to image the anatomy of the neck, C-spine, and brain stem with increases in SNR and patient comfort. The system is a receive-only array consisting of a flexible anterior bib with a conformal rigid base.The C-spine Array is a four channel phased array coil. The cradle of the neck contains two channels combining in the MR system to be in quadrature. The flexible anterior bib and conformal base bring the patient closer to the coil electronics resulting in higher SNR. For Details Please Call - 866.646.3349

Trauma Neck Coil ArrayThis Trauma Neck Array was developed to image the cervical spine and soft tissues of the neck while the neck is immobilized in a MRI compatible cervical collar or halo. The Trauma Neck Array allows the patient to be imaged with the collar in place and no pressure points from rigid coil geometry. The patient does not have to be removed from a flat board. The array consists of two channels - one channel in the anterior and one in the posterior. The flexible anterior and posterior halves allow the coils to be positioned closer to the patient resulting in higher SNR. For Details Please Call - 866.646.3349

Bubbles in Your ACR Phantom?

The refill kit for the ACR Phantom includes everything you need to easily remove air bubbles and top off the ACR Phantom. This saves time and money by elimi-nating expensive overnight shipping costs to ship the phantom back and forth. The refill kit allows for multiple refills so you have a trouble-free solution the next time your phantom gets an air bubble.

Item Number: 03-76905-FillKITDescription: ACR Phantom Refill Kit

Phantom Refill Kit

53

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



imag

ing

enha

ncem

ent p

rodu

cts

There is also an 8-channel kit that contains an Accusorb MRI Extremity Shielding blanket that was de-signed to rid image artifacts that may show in the Sagittal and Transverse view.

Item Number: Description: 03-SAT-005-0001 8 Channel Sat Pad Breast Imaging Kit 03-SAT-MAC-01 8 Channel Sat Pad Breast Imaging Kit with 34” x 14” Accusorb Shielding Blanket 03-SAT-005-0002 7 Channel Sat Pad Breast Imaging Kit

Sat Pad Breast Imaging Kits

Developed to deal with specific problems associated with Fat Sat and Con-trast Issues in Breast Imaging. Kits have been developed for 4 channel, 7 channel, and 8 channel coils.

Pads contain a perflourocarbon fluid that contains no hydrogen atoms and has magnetic susceptibility similar to that of human tissue. They will con-tribute no signal to the MR Image.These imaging kits reduce the influence of the human body on the magnetic flux, improving the homogeneity of the main field. They will attenuate field distortions caused by sharp angled anatomies such as breast and chest walls when performing breast imaging. The breast kits eliminate air-tissue interfaces making the target areas more spherical.

Imaging Kit on GE Coil

Sat Pad is a MRI image enhancement device somewhat analogous to the x-ray bolus device that have histori-cally been used to improve image quality in radiographs. The Sat Pad is filled with a non-protonated fluid which has a magnetic susceptibility to that of water containing tissue.

The Sat Pad is designed to improve the homogenenity of the local magnetic field, thereby improving images from such pulsing parameters as chemical shift fat saturation and gradient echo imaging. The pads are designed to be positioned against the patient's skin in the anatomical area of interest, thus eliminating the air/tissue interfaces.

The perfluorocarbon liquid is nontoxic and chemically stable, and like gaseous chlorofluorocarbons, perflouoro-carbon does not harm the ozone layer and is not regulated as a hazardous chemical.

Sat Pad

Item Number: Description: 03-SAT-1000 Sat Pad Muscular-Skeletal Kit - Shoulder, Knee, Wrist, & Ankle Pad 03-SAT-1003 Sat Pad Neck Kit w/Brachial- Neck Pad & 10 Covers, Brackial Plexus Pad & 10 Covers 03-SAT-1004 Sat Pad Neck Kit - Neck Pad & 10 Covers 03-SAT-1005 Sat Pad Shoulder Pad 03-SAT-1006 Sat Pad Back Kit - Back Pad & 10 Covers 03-SAT-1007 Sat Pad Knee Pad 03-SAT-1008 Sat Pad Ankle Kit - Ankle Pad & 10 Covers 03-SAT-1009 Sat Pad Wrist Pad 03-SAT-1010 Sat Pad Prostate Kit - 5-500cc Bottles of Sterile Perfluberon 03-SAT-2000 Sat Pad Neck Pad Covers - Box of 10 03-SAT-2001 Sat Pad Brachial Covers - Box of 10 03-SAT-2002 Sat Pad Back Pad Covers - Box of 10 03-SAT-2003 Sat Pad Ankle Pad Covers - Box of 10

mri

mea

surin

g, te

stin

g &

shi

eldi

ng

54

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



FerrAlert Feromagnetic . . . . . . . . . . . . . 55Detection System

Walk Thru Metal Detector. . . . . . . . . . . 55

Surface Phantom Coil . . . . . . . . . . . . . 56

Testing Phantom. . . . . . . . . . . . . . . . . . 56

Phantom Cradles . . . . . . . . . . . . . . . . . 56

Demagnetizer . . . . . . . . . . . . . . . . . . . . 56

Portable Gaussmeter . . . . . . . . . . . . . . . 57

Lab Gaussmeter. . . . . . . . . . . . . . . . . . 57

Hand Held Metal Detector . . . . . . . . . . 58


55

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



FerrAlert SystemThe FerrAlert Halo System consists of FerrAlert Halo PreScreen and FerrAlert Halo Entry to supplement current screening procedures. This combination ensures the most compre-hensive way to reduce the risk of injuries, mortality, quenches, and damage to the mag-net. Each part of the System (PreScreen or Entry) can be purchased separately. The FerrAlert Halo PreScreen is set to a very high sensitivity to detect objects as small as a hairpin. This unit is typically placed in a dressing room or the interview/screening area. It requires no breach of the patient or staff intimate personal space. If an object is detect-ed the operator will be Alerted by a visual and audio alarm.Unlike other types of detectors, FerrAlert Halo PreScreen emits no electromagnetic radia-tion to detect objects. Titanium. plastic, wood, copper, aluminum and all other non-mag-netic materials not attracted to the magnet will be ignored.

The FerrAlert Halo Entry is used to detect items as small as a pocket knife that may be brought into the scanning room. Although existing safety recommendations to prevent accidents are comprehensive, human error still occurs, resulting in injuries or even death to patients, staff and visitors. With increasing magnet field strength and steeper field gradients, the risks are increasingFerrAlert™ yields a rapid return on investment and pays for itself by prevention of dam-age to a magnet as well as support equipment. Imaging downtime can cost $ 1,200 to $ 3,000 an hour over time and easily pay for FerrAlert™ Please see page 44 for details

mri

mea

surin

g, te

stin

g &

shi

eldi

ng

These metal detectors are high-performance walk-through metal detectors. They are manufactured in compliance with ISO 9001 quality procedures using the most advanced electronic technology. The unique patented gate design is compact and easy to install while utilizing minimal amounts of space. The aesthetics of our metal detectors make them the ideal solution for the most demanding architectural environments. The control units are integrated into the structures of the gates and are characterized by high reliability and immunity to electromagnetic interference. Access to the control units are protected by both a mechanical lock and by two software level passwords. The sensitivity of detection is independent from the speed of transit. This results in a very high flow rate of people through the gate.• Digitally adjustable sensitivity with a wide range of values• All functions programmable and controlled by microprocessor• International Standards: Direct selection of the International Security Standards• Programming access protected by both a mechanical lock and by two software level passwords• High speed of detection: up to 15 meters per second• Very high immunity to electromagnetic and mechanical interference• Automatic synchronization between two or more metal detectors, (at a distance of up to 5 cm from each other), without using cables• Professional high integration and high reliability electronics• Electronic control unit integrated in the archway

Please see page 45 for details

Walk Through Metal Detector

mri

mea

surin

g, te

stin

g &

shi

eldi

ng

56

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MRI Surface Coil Phantom

MRI Multi-Purpose Phantom

Accurately Evaluates: High Spatial Resolution, Profile, Slice to Slice Gap,Magnetic Field, Gradient Linearity, RF Signal Bright-ness, Slice Thickness, MTF Evaluation, Uniformity, Image Artifacts, And many others.

Item Number: Description: 03-76904 Surface Coil Phantom

A comprehensive range of tests in one compact unit that can be measured include: Slice thickness, slice orientation, interslice gap, magnetic fields homogeneity, radio frequency signal uniformity, spatial resolution in positive and negative contrast, and modulation transfer function. Item Number: Description:03-76903 Multi-purpose phantom

Consistently and precisely positions the ACR Phantom in the head coil in less than a minute saving valuable MRI time - approximately 30 minutes per week/26 hours per year. Saves the MRI technologist the frustration of posi-tioning the ACR phantom without a compatible cradle;Available for GE, Hitachi, Siemens, Toshiba, and Philips head coils; Please email info@magmedix or call toll free 866-646-3349 for specifics.

Demagnetizer

Aperture - 2” (5.08 cm) Field - 300 Oersteds rms Frequency - 50Hz to 400Hz depending on available line frequency Input Power - 110V/220V - 50Hz to 400Hz Physical Size - 6” H x 7.5” W x 6.0” D Weight - 5 Ibs High field - 300 Oersteds rms. The general purpose 50-400 Hz demagnetizers generate approximately 300 oersteds in 2” aperture, offering broad range demagnetization.

The model 03-DM-1 is a manual off/on demagnetizer designed to accommodate a broad range of items which will pass into a 2” aperture. The item to be demagnetized must only be passed into the aperture and out of the field to insure proper demagnetization.

NOTE: Demagnetizer is not MRI safe. Designed for use outside the magnet room.

Item Number: Description: 03-DM-1 Manual Demagnetizer

MRI Phantom Cradles - For use with ACR Phantom

mri

mea

surin

g, te

stin

g &

shi

eldi

ng

57

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Fully portable hand-held effect gaussmeter designed as a true self-contained instrument for DC and C (RM's) magnetic field measurements. Its lightweight and small size allows the operator to rapidly and coveniently measure magnetic fields with the same accuracy as many laboratory instruments, but with the added convenience of hand-held portability,which extends its usefulness for many applications.

Three full-scale bipolar ranges of + 100.0 gauss, + 1,000 gauss, and + 10.00 KG with 100% over-range and resolution of 0.05% provides DC and AC field readings from 10 Hz to 20 KHz. Readings are displayed on a 3 ½ digit + 0.05% bipolar LCD meter.In addition, a wide selection of pre-calibrated transverse and axial Hall probes are available to meet most every application, including probes that will extend the measuring range of this instrument to 150.0 G.

Standard features include batteries, leather-like carrying case, and a 6’ extension probe cable. In order to insure long battery life, an auto-shut-off circuit that remembers to shut the instrument off if accidentally left in the operate mode is optional. To further extend battery life, a battery charger/eliminator is supplied which will also provide for AC operation when required. Alkaline batteries can also be replaced with “AA” rechargeable batteries.

Gaussmeter is not MRI safe. Please keep a safe distance away from magnet. Item Number: Description:03-MG-4D Hand-Held Gaussmeter

Hand Held Gaussmeter

Laboratory GaussmeterAccurately measures field strength of pulsed gradient coils. 03-MG-5DP is a general purpose peak reading porta-ble Hall effect gaussmeter designed to measure DC & AC (RMS) magnetic fields. Three full-scale bipolar ranges of + 100.0 gauss, + 1.000 KG and +10.00 KG with 100 % over-range and resolution of 0.05% provides DC & AC field readings from +100 milligauss to +19.99 KG with true RMS readings from 3 Hz to 20 KHz; readings are dis-played on a 3 1/2 digit + 0.05% bipolar LCD meter.

In Peak Mode, the 03-MG-5DP will sense and display the most recent peak magnetic field level from DC to 20KHz. Please specify range of field strengths to be measured. Also specify axial or transverse mounted probe.Instrument can be set to either detect the peak value when the field is bipolar (varying from positive to negative) or it can be set to exclusively detect either the positive peak or the negative peak of varying field. With the unique digital circuit design, there is no decay in peak field reading.

A wide selection of pre-calibrated transverse and axial Hall probes is available to meet most every application, including probes which will extend the measuring range of this instrument to 150.0 KG.

The 03-MG-5DP operates either from AC or from sealed lead acid batteries. During AC operation, the batter-ies receive a floating charge which keeps them fresh until the instrument is required for portable use. Freshly charged batteries will continuously operate this instrument for approximately 10 hours. Analog outputs are also provided for simultaneous external monitoring of instantaneous field level and peak field level.Gaussmeter is not MRI safe. Please keep a safe distance away from magnet.

Item Number: Description: 03-MZG-l Portable Gaussemter

mri

mea

surin

g, te

stin

g &

shi

eldi

ng

58

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Hand-Held Metal DetectorThe PD140 portable Metal Detector is a device designed to detect metal objects or masses carried by people. It can be used for detecting small pieces of metal on people. The special shape of the sensitive surface makes operation of the device easy, unlike portable metal detectors with ring transducers.The PD140 Metal Detector is available in two versions:• 03-PD140: Hand-Held Metal Detector with Standard Sensitivity 3 sensitivity settings: low, normal, high Audio and LED alarms 150 hours of continuous use with 9v alkaline battery, not included * Uses dry battery only• 03-PD140R: Deluxe Hand Held Metal Detector 3 sensitivity settings: low, normal, high Audio and LED alarms 50 hours of continuous use with NiMh battery includes rechargeable NiMh battery, spare battery, battery charger, power supply cable, hard case * Uses NiMH rechargable battery onlyTechnical Features• Power supply: PD140 9V battery • Three-position switch with selection of visible alarm or audible and visible alarms• Built-in buzzer: PD140-PD140R High intensity pulsed acoustic alarm • Adjustable sensitivity• Indicator lamps for power on and alarm • Visible indicator of low battery charge on deluxe model• Battery life in continuous operation: with NiMh batteries - 50 hours max , with alkaline batteries - 150 hours max• Operating temperature: 5 °F -140 °F (-15 - +60 °C)• Relative humidity: 0 - 95%• Manufactured in black, shock-resistant ABS • Weight: 1 lb. (0, .4 kg)

The V140 carrying-case is designed to house the PD140 Metal Detector and its accessories. It is pre-disposed to contain the following items:• PD140R or PD140SR Metal Detectors• BC140 Battery-charger • Spare NiMh battery • Power supply cable •Instructions for useShock-resistant ABS construction and the special storage compartments make the V140R carrying-case the ideal, safest and most compact means of transporting the PD140R Metal Detector.

The BC140 unit provides recharging, without electrical contact, of the NiMh batteries in the PD140R Metal Detector. The VC209 unit provides recharging, by contact, one 9V NiMh battery. The BC140 battery charger is designed as a stand for the PD140 Metal Detector.

Please note: Metal detectors are not intended to detect metal items or implants inside the body.They will not pinpoint the loca-tion or even determine the presence of metal inside the body. A metal detector cannot differentiate between magnetic and non-magnetic items. Its value lies in its ability to alert the staff to the presence of metal items. It is up to the staff member to determine whether or not the item has magnetic properties. Note: Metal Detectors are not MRI Safe! Use outside the magnet room, before the patient enters.

BATTERY-CHARGER BC140 & VC209 (included w/ deluxe)

CARRYING-CASE V140 (included w/ deluxe)

patie

nt c

omfo

rt an

d po

sitio

ning

59

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Prism Glasses . . . . . . . . . . . . . . . . . . . 60

Neonatal Noise Guards . . . . . . . . . . . . .60

Disposable Ear Plugs. . . . . . . . . . . . . . . 60

Eye Pillows. . . . . . . . . . . . . . . . . . . . . . . 60

Stereo Music System . . . . . . . . . . . . . . 61

Silent Scan Audio System . . . . . . . . . . 62

Claustrophobic Relief Mirror . . . . . . . . .63

Fiber Optic Microphone . . . . . . . . . . . .63

IMROC Interventional MR Optical Communications System . . . . . . . . . . . . 64

Rollbord . . . . . . . . . . . . . . . . . . . . . . . .65

Positioning Devices . . . . . . . . . . . . . . 66

Positioning Kits . . . . . . . . . . . . . . . . . . 67


patie

nt c

omfo

rt an

d po

sitio

ning

60

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



When worn by the patient in the MRI, these glasses greatly reduce patient anxiety by allowing the patient to see the room outside the bore of the scanner.

Item Number: Description:03-8451 Non-Magnetic Prism Glasses

Non-Magnetic Prism Glasses

Non-Magnetic Neonatal Noise Guards

These safe comfortable earplugs will help relax your patient during MRI scanning. Earplugs are packaged separately in pairs and supplied in dispenser boxes for easy access. Available with or without cord, one (1) box contains 200 pairs.

Item Number: Description:03-JB-7031 Earplugs without Cord03-JB-7032 Earplugs with Cord

Eye Pillows

These pillows are designed to relax your patient for a more successful scan. Many people rap-idly experience a state of calm from the comforting effects of the pillow. The mild weight of the pillow encourages the patient to close his or her eyes and unwind with the soothing scents of lavender or vanilla. The eye pillow is also available in an unscented form. These eye pillows have tested MRI Safe in a 3T environment. Flax seed eye pillows can be customized with your facility’s logo. Please Note: These eye pillows contain flaxseed, scented oils, and fabric dyes. Use cautionto determine any possible allergies to these products.

These pillows are for single user use only. Please call 866-646-3349 for details.

Designed specifically for neonates, the Neonatal Noise Guards help protect their sensitive ears, and provide a safe environment for healthy development.Decreases the MRI noise levels by at least 7db. Reduces disruptive noise associated with transfer of infants to different hospital units, and provides quieter environment during transport. Fits comfortably around the baby’s ears with a soft foam oval-shaped de-sign, and gentle hydrogel adhesive. Meets infection control standards through single-patient use design. A must have for preemie and newborn patients, Neonatal Noise Guards help protect these little one’s sensitive ears in the MRI environment, and provide peace and quiet in the NICU. Neo-natal Noise Guards reduce the surrounding environment noise level by at least 7db, with a reduction in sound pressure of more than 50%. Item Number: 03-NNG Description: Neonatal Noise Guards

Earplugs

patie

nt c

omfo

rt an

d po

sitio

ning

61

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MRI Stereo Music SystemEquipped for both patient and operator comfort, the Full Sound System provides everything you need to relax your patients with music during their scan. The Full System also allows patients and technologists to listen to two dif-ferent music sources at the same time. With Dual Active Headsets, both of the patient and a companion can use headsets at the same time. • Multidisc 3-disc CD changer with AM/FM tuner and speakers • Patient Amplifier • Transducer • Push-button desk-top microphone • One each of four different headsets: The patented NGHS, SNGHS, SHS, and FEPHS • Two ten foot sections of Patient Sound Tubing, plus one Dual Headset Tubing Section • Starter quantities of all sanitary supplies: SCL, SCS, FEP, and BEP • Dual Active Headset Capability for patient and a companion • Different music sources for patient and technologist • RF Filters on 1.5T magnets and above

03-NGHS - This newly redesigned earmuff headset fits comfortably and securely over the ears, providing a full 29db Noise Reduction Rating (NRR) to patients during their scan. Tested according to the ANSI specification S3.19-1974, this headset offers the maximum attenuation available to patients in the MRI environment 03-SNGHS - ANSI specification S3.19-1974 requires patients undergoing MRI to be provided with noise reduction devices offering a minimum of 29db Noise Reduction Rating (NRR). The SNGHS is not rated sufficiently to reduce noise, and therefore must be used in conjunction with earplugs with a minimum NRR rating of 29 in order to be ANSI compliant 03-SHS - The Standard Head Set is typical in design to an airline headset. Light weight and completely pneu-matic, it fits comfortably over the ears. Adjustable to accommodate larger heads. ANSI specification S3.19-1974 requires patients undergoing MRI to be provided with noise reduction devices offering a minimum of 29db Noise Reduction Rating (NRR). The SHS is not intended or rated to reduce noise, and therefore must be used in con-junction with earplugs with a minimum NRR rating of 29 in order to be ANSI compliant. Compatible with Sanitary Covers Small (SCS). 03-FEPHS - The Foam Ear Piece Head Set is a stethoscope style head set with disposable foam ear tips. Fits easily into any head coil on adults and children alike, and is completely pneumatic. Replacement foam ear pieces available. ANSI specification S3.19-1974 requires patients undergoing MRI to be provided with noise reduction devices offering a minimum of 29db Noise Reduction Rating (NRR). The FEPHS is not intended or rated to reduce noise, and therefore must be used in conjunction with earplugs with a minimum NRR rating of 29 in order to be ANSI compliant. Item Number: Description: 03-76-965 Complete MRI Stereo System. 03-76-965-M Mini Stereo System - Complete System, less stereo and speakers, includes AM/FM radio and all other items of the complete system. 03-NGHS Noise Guard Head Set provides 29db of noise attenuation. (see notes above regarding safety) 03-SNGHS Slimline NGHS provides 12db of noise attenuation. (see notes above regarding safety) 03-SHS Standard Head Set. (see notes above regarding safety) 03-SCL Sanitary Covers Large for NGHS & SNGHS lots/1,000. 03-SCS Sanitary Covers Small for SHS lots/1,000. 03-PST Patient Sound Tubing. 03-PA Patient Amp AM/FM/35 Watts. 03-PBMIC Push Button MIC. 03-FEPHS Foam Ear Piece Head Set. (see notes above regarding safety) 03-ARC Disposable Foam Replacement Tips For Foam Ear Piece Head Set. Products Specifications Are Subject To Change Without Notice

62

Don

’t se

e it?



Silent Scan 3000 Audio SystemThe Silent Scan 3000 Series Audio System offers an outstanding level of performance and features.

MRI’s are noisy. Whether you run a clinical practice or do fMRI research, gradient noise is a problem that you and your patients have to deal with. Silent Scan™ Hearing Protection and Communication systems offer more than just music. Designed specifically for MRI use, Silent Scan™ offers solutions for patient hearing protection, as well as solutions for patient communication.And the technologist has not been forgotten. An easy to use gooseneck microphone for communication;simple controls that make sense; and tough equipment that sets up quickly. Silent Scan™ is a technologist’s tool.

Patient Comfort is ... Hearing Protection Patient comfort starts with protection against gradient noise, the major complaint ofMRI patients. Two different headsets means flexibility in hearing protection choices; the full coverage headset fits most head coils, while the stethoscopic headset can beused for very confining applications. Patient hygiene is easy with disposable coversand eartips. Most MRI patients have great anxiety about their exams, and their ability to clearly communicate with you goes a long way towards relieving that stress. Silent Scan’s™ specially designed headsets have a built-in microphone channel that allows crystal clear communication between you and your patients. Patients will be clearly heard, regardless of their scan type or location within the bore. Yelling or repetition never occurs, because you and your patient will easily understand each other.

Real Friend audio headset™ Having Mom, Dad or just a friend in the scan room is a great comfort to many patients during their MRI exam. Add-ing the Real Friend accessory headset to your Silent Scan™ system allows that comforting friend to communicate with both the patient and the technologist. And if you are using one of Avotec’s great visual systems, you should add Real Friend Video™ for the ultimate in patient comfort.

Patient Comfort is ... Music The beneficial effects of music in reducing apprehension in MRI patients is well known. comforting influence, The Silent Scan™ headset allows your patient to relax to the music - free from gradient noise. Because the headsets offer genuine hearing protection, the highest quality sound can be enjoyed at a comfortable listening level.

Patient Comfort is ... User-Friendly Equipment Equipment that is easy to operate gives you more time to devote to your patients. All elements of the Silent Scan™ system have been constructed for ease of use. The Silent Scan™ console has only five controls, and in routine op-eration, only two of these controls are needed. The communication console has been thoughtfully crafted for easy operation, reliability, and long term comfort for you and your patients. Item Number: Description: 03-AS-993000 Silent Scan™ 3000 Audio System (includes communications console, microphone, electronics, cableing, two types of headsets) 03-AS-730101 Real Friend audio headset™ Silent Scan 2000/2100 (Black Label Console) Replacement Head Sets and Tubing 03-AS-723200 Full Coverage Headset 03-AS-723300 Stethoscopic Headset 03-AS-723100 Headset to Transducer Tubing 03-AS-723203 Full coverage headset 03-AS-723302 Stethoscopic headset 03-AS-723102 Headset to Transducer Tubing

patie

nt c

omfo

rt an

d po

sitio

ning

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616

patie

nt c

omfo

rt an

d po

sitio

ning

63

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Clear Communications During MRI Scans - MRI Operations produce intense acoustic noise levels (sometimes exceeding 100dB), as well as very high electromagnetic and radio frequen-cy noise. These noises prevent normal communications with the patient during scans.

The FOMRI™ fiber optic microphone virtually eliminates EPI acoustic noise, and is the most advanced technology available for personal communications in the MRI environments. It can be used in combination with any noise reduction headset to enable simple, crystal-clear verbal communications once again between the patient and MRI staff, and between MRI operators.

In fact, clear communications improve patient comfort dramatically, making it possible to get more accurate MRI scans with much less effort.

This proprietary, passive system is completely free of metal and electronics which could cause interfer-ence during the scanning process, and is completely safe and simple to use. FOMRI systems are in use at leading universities and research organizations world-wide. Item Number: Description: 03-501A0069 FOMRI™ I Noise Canceling Optical Microphone

FOMRI™ Fiber Optic Microphones

Single Channel Noise Canceling

The single channel FOMRI system is our basic noise canceling microphone for MRI environ-ments. Based on Optoacoustics’ advancedoptical sensor MEMS technology, this system is ideal for use with any noise reduction headsetand easily supplements any MRI equipment. FOMRI™ I

Basic Noise Canceling Optical Microphone

Claustrophobic Relief MirrorThe Claustrophobic Relief Mirror was developed to do precisely what the name implies. The mirror connects directly to the table at nearly any table position, thereby allowing all patients to see outside of the magnet during their procedure. Two removable mirrors are provided – one for foot-first procedures and the other for head-first procedures. This ensures that the visual field remains optically non-inverted. Since it is not worn on the face, it does not require cleaning after each patient use.

Item Number: Description: 03-1200GE Claustrophobic Relief Mirror for GE MRI**03-1200PI Claustrophobic Relief Mirror for Philips MRI** 03-1200SI Claustrophobic Relief Mirror for Siemens MR**03-1200FFM Foot First Mirror Option for Claustrophobic Relief Mirror ^^ ** Consists of frame assembly and head-first mirror ^^ Optional foot-first mirror not included with frame assembly

64

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



patie

nt c

omfo

rt an

d po

sitio

ning

Relax, You Can Talk Again And Be Heard.

Optoacoustic’s IMROC™ is a fiber optic-based system that brings routine communications back to MRI scanner rooms.IMROC enables up to six (6) concurrent dialogs during a scan - up to five staff members, plus patient - using adaptive DSP-based noise reduction.

Now doctors and staff can speak with each other, with their patient, and with control room technologists, Safely, Intelligibly and Routinely. IMROC also features a MP4 Stereo Entertainment System to make patient comfort com-plete. IMROC is the only communications system that effectively filters out MRI background noise with complete EMI/RFI immunity, ensuring excellent sound quality without imaging interference.

Remember when it was simple to talk? IMROC makes it simple again.

IMROC - Interventional Magnetic Resonance Optical Communications

Each Lightweight Optical Head Set consists of slim ear defenders,two high-fidelity optical speakers,and FOMRI Dual Channel Noise Canceling Microphone. Optoacustics’ Headsets areself-hearing and use proprietary DSP capabilities to filter out MRI noise picked up by the microphone during the scan.

FOMRI II Microphone Optoacoustics’ Dual Channel Noise Canceling FOMRI microphone is the industry standard for MRI environ-ments, with excellent sound quality.

The FOMRI eliminates most acous-tic noise, provides real-time adap-tive noise canceling and delivers very high intelligibility. The FOMRI includes a holder for disposable hy-gienic pop screens.

The Optical Switching Unit is the control box used to determine with whom a doctor speaks.Worn by each staff mem-ber during the scan, the Switching Unit is connected via fiber optic cables to the optical Headset and the EOU.Simple controls enable instant doctor-patient-tech-nologist channel selection as well as volume.

The IMROC Mixing Console enables full communications among doctors and tech-nologist and also manages the interactive environment: turning off selected head-sets, muting a patient’s speaker, adjusting noise reduction levels or adjusting a patients’s music volume.Music can be piped directly to a patient.Up to two additional head-sets can be connected to the Mixing Console for use by technologists in the control room.

Electro-Optical UnitThe electro-Optical Unit is the heart of the IMROC system, receiving incom-ing communications from each Optical Headset and from the Mixing Console, Processing it, and distributing it to its intended staff and patients channels. IMROC’s EOU 6000 Features all of the robust safety, electronics and power components that are required for Class 1 laser systems.

Please contact Magmedix for details 866.646.3349

65

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Lateral Transfer without lifting: No lifting required, staff back injury is reduced. The results can be savings on both workers compensation and insurance.

Our Unique Conveyor Belt action carries patient from surface to surface, powered only by a gentle “push” Rollbord bridges the gap : Older airflow technology requires a bridge to cover gaps between surfaces. Slide sheet transfers across gaps are painful to the patient. Rollbord automatically bridges the gap and the patient feels nothing.

Disposable cover sheets are inexpensive and protect Rollbord from soiling and provide an additional layer of infection control.

Rollbord folds in half and can hang on a wall hook for easy storage.

MRI Rollbord Rollbord is a soft and lightweight patient transfer device that contains no metal rollers. The anti-bacterial treated surface and disposable cover sheet help to achieve maximum infection control. The Rollbord is an important part of any Safe Patient Handling Program.

No Rollers! No Lifting • No Noise • Soft & Comfortable • Anti-Microbial,Anti-Static Material

Patient rides on a comfortable surface with far less risk of skin tears, injury, bruising and agitation associated with transfers on slide sheets.

Magmedix does not offer this product for sale outside of the USA

patie

nt c

omfo

rt an

d po

sitio

ning

patie

nt c

omfo

rt an

d po

sitio

ning

66

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Patient Postitioning Devices

MRI Positioning KitsThis Patient Comfort Systems material used for medical imaging has been specifically formulated to maximize patient comfort and maintain a thin form factor while optimizing the available free space for the patient when inside the MRI bore. These mattresses and positioners are com-patible with existing tables and are designed to simply replace the cur-rent pads.

FEATURES & BENEFITS Decreased patient motion during scans due to enhanced patient comfort. The ultimate in pressure management technology for MRI, CT, and PET scanners. Molds to patient's body. Reduces peak pressure areas, friction and pressure for improved blood flow. Exceptional radiolucent qualities.Can be easily cleaned and disinfected with any standard hospital disin-fectant. Reduces operation costs. Quick return on investment after purchase.Ultra-strong fabric with sewn seams to protect the core material from body fluids. Permanent anti-microbial agent incorporated in the top and bottom cover fabrics. Vapor, moisture impervious and latex free. Reduces sweating and shearing.


03-PC-0102 General Positioning Kit ( 12 pcs.)

03-PC-1115 Positioning Kit for GE 1.5T & 3T Scanners (6 pcs) 03-PC-1116 Positioning Kit for GE 1.5T & 3T Scanners (3 pcs) 03-PC-1311 CTL Coil Positioning Pad Kit for GE 1.5T Scanners 03-PC-5115 Positioning Kit for GE 0.2T, 0.35T & 0.7T Scanners (6 pcs) 03-PC-5116 Positioning Kit for GE 1.5T & 3T Scanners (3 pcs)

03-PC-2115 Positioning Kit for Hitachi Scanners (6pcs) 03-PC-2116 Positioning Kit for Hitachi Scanners (3pcs) 03-PC-3115 Positioning Kit for Philips, Siemens, and Toshiba Scanners (6pcs) 03-PC-3116 Positioning Kit for Philips, Siemens, and Toshiba Scanners (3pcs)

Note: No substitutions or subtractions can be made to kits. Any changes will generate per piece pricing.

67

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



These positioning products offer cost effective solutions for ensuring correct and comfortable positioning during MRI procedures. Proper patient positioning is critical to accurate scans, diag-nosis, and helps to minimize the cost of each scan.

MRI Patient Infant Hugger Kit

Patient Positioning Kits

Deluxe Positioning Kit Large Positioning Kit Small Positioning Kit Ortho Positioning Kit Rectangle Positioning Kit Skull Positioning Kit Head Immobilizer Positioning Kit X-Ray Positioning Kit CT Positioning Kit Positioning Kit A Positioning Kit B Positioning Kit C Positioning Kit D Positioning Kit E Positioning Kit F Positioning Kit I Child Hugger Kit (4 months to 3 years) Infant Hugger Kit (up to 3 months)

Infant immobility has never been so easy. This kit is designed to hug rather than confine, achieves womb-like warmth and security.

MRI Patient Deluxe Positioning Kit

MRI Patient Positioning Kit B

MRI Patient Positioning Kit E

Please visit magmedix.com or call 866.646.3349for specifics on these kits

MRI Patient Child Hugger Kit

MRI Patient Positioning Kit I

patie

nt c

omfo

rt an

d po

sitio

ning

mri

acce

ssor

ies

68

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Non-Magnetic Tool Kits . . . . . . . . . . . . 69

Non-Magnetic Tweezers . . . . . . . . . . . 70

Non-Magnetic Work Stands . . . . . . . . . 71

Non-Magnetic Step Ladders . . . . . . . . 72

Ceramic Scissors. . . . . . . . . . . . . . .. . . 73

Mayo & Solution Stands . . . . . . . . . . . 73

Portable I.V. Pole . . . . . . . . . . . . . . . . . 73

Utility Furniture. . . . . . . . . . . . . . . . . . . 73

Custodial Equipment . . . . . . . . . . . . . . . 73

Apparel. . . . . . . . . . . . . . . . . . . . . . . . . 73

MRI Name Tag Holders. . . . . . . . . . . . .73

Storage Bins . . . . . . . . . . . . . . . . . . . . 74


Screwdrivers:

Standard, 6 1/2” length Standard, 10 1/8” length Phillips, 6 1/8” length Phillips, 10 1/8” length Offset, standard, 5” length

Pliers:

Combination Wrenches:

1/4” x 5/16”, 3/8” x 7/16”, 7/16” x 1/2”, 1/2” x 5/8”

Allen Wrenches:

1/16”, 5/64”, 3/32”, 1/8”, 5/32” 3/16”, 7/32”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”

Miscellaneous

Wrench, adjustable, 15/16” open Scissors, 8” length Spatula, 1” x5 3/4” blade Knife, common, 3 1/8” blade C Clamp, 3/4” opening Hammer, ball peen, 4 oz. head

mri

acce

ssor

ies

69

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Screwdriver, standard, 6 1/2” length Screwdriver, phillips, 6 1/4” length Wrench, adjustable, 15/16” opening Pliers, combination, 6 1/2” length Pliers, long-nose, 7” length Scissors, 12” length Knife, common, 3 3/4” blade

Note: Additional Tools can be Special-ordered

Item Number: Description: 03-T1000 7 piece Hand Tool Kit

7 Piece Basic Hand Tool Kit:

30 Piece Basic Hand Tool Kit:

Combination, 6 1/2” length Groove Joint, 12” length Pliers, long-nose, 7 "length

Non-Magnetic Tools Kits

70

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



mri

acce

ssor

iesNon-Magnetic Tweezer

The tweezers listed below are designed to meet the precision, lightweight requirements of the electronic industry. Swiss crafted of the finest alloy. Hardened points for added durability. Tensioned to provide correct spring action and reduce hand fatigue. These tweezers, in the most popular styles, are available in Stainless Steel or Titanium. These tweezers are not intended for surgical use. Heavy Duty/Strong Point Models: 03-TW446 -Heavy duty, strong blades, taper to regular strong points.(Anti-magnetic and anti-acid, 4-1/2”) 03-TW458 - Blades taper from body, strong regular beveled points. (Anti-magnetic and anti-acid, 4-3/4” ) 03-TW418 - Same as 03-TW458 above but made of titanium. 03-TW450 - Same as 03-TW458 above with serrations on tips and out side for better grip. (Anti- magnetic and anti-acid 4-1/2” OAL) 03-TW490 - Fine strong points, an improved blade angle for visibility.(Anti-magnetic and anti-acid 4-3/8” ) 03-TW506 - Extra heavy tweezer for bending or straightening blades angle to non-cutting knife edge. (Anti- magnetic and anti-acid 4-1/2” OAL) Fine Point Models:

03-TW454 - Strong blades w/fine points.(Anti-magnetic, anti-acid 4-3/4” OAL)

03-TW414 - Same as 03-TW454 above but made of titanium. 03-TW482 - Extra fine work, long blades break sharply from body and taper to super fine points. (Anti- magnetic and anti-acid 4-1/2” OAL) 03-TW430 - Same specifications as 03-TW482 above but made of titanium. 03-TW486 - Extra fine work, long blades break sharply from body and taper to super fine points. (Anti- magnetic and anti-acid 4-3/8” OAL) 03-TW434 - Same specifications as 03-TW486 above but made of titanium. 03-TW494 - Handspring or wire coiling, sharp angled superfine tapered points. (Anti-magnetic and anti-acid length of points 9/16” x 4-1/4” OAL) Rounded Point Models: 03-TW474 - Assembly work, very fine round points, regular size.(Anti-magnetic and anti-acid 4-3/4” OAL) 03-TW424 - Same specifications as 03-TW474 above but made of titanium. 03-TW478 - Assembly work, very fine round points as Model: 03-TW474 but shorter.(Anti-magnetic and anti-acid 4-1/4” OAL) 03-TW428 - Same specifications 03-TW478 above but made of titanium. 03-TW498 - Assembly work, curved super fine rounded points. (Anti-magnetic and anti-acid 4-3/8” OAL) 03-TW442 - Same specifications as 03-TW498 above but made of titanium. 03-TW502 -Same specifications as 03-TW498 above with serrated jaws for non-slip action.(Anti- magnetic and anti-acid 4-3/8” OAL)

mri

acce

ssor

ies

71

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



• Industrial Type IA, 300 Ib. duty rating. • Large 12" x 16" platform provides a comfortable work surface on which to stand for extended periods of time. • 6" deep slip-resistant steps • Each step is braced front and back with 4 gussets and attached with 16 rivets per step for added strength and durability. • 27° stair slope for easy climbing. • Slip-resistant rubber treads attached to heavy-duty aluminum angle feet provide sure footing. • Optional Tilt-N-Roll casters for easy repositioning and transporting. • Optional handrail available.

Lbs7

Item #03-875-12

HeIgHt12”

PLatform sIze12”

base sIze18” x 24”

DescrIPtIonNon-Folding Workstand

• Extra large 20" x 20" slip-resistant coated platform adds utility and maximizes comfort for extended fixed height work. • Extra heavy-duty skid plate feet protect side rails and provide a large contact area with the supporting surface. • Solid channel side rail construction for superior strength. • 27° slope with 10" risers and 6" deep step allows for easier climbing and descent. • 30" high handrail for added safety. • 5" Tilt-N-Roll casters allow for easy positioning and put all feet on the floor for climbing. • Each step is supported with 4 gussets and secured with 16 rivets for added strength. • 30" to 120" shipped fully assembled; 130" and 140" shipped "knocked down" to reduce freight costs.

Lbs6486108120132162

DescrIPtIon40” Workstand60” Workstand80” Workstand100” Workstand120” Workstand140” Workstand

Item #03-675-4003-675-6003-675-8003-675-10003-675-12003-675-140

HeIgHt to PLatform40”60”80”100”120”140”

bottom sIze25” x 47”27” x 61”30” x 71”32” x 88”35” x 102”37” x 116”

Item #03-720-2003-730-3003-748-48

HeIgHt20”30”48”

PLatform sIze16” x 12”16” x 12”16” x 12”

base sIze21” x 24”24” x 32”27” x 43”

Lbs.121522

DescrIPtIon20” Heavy Duty Workstand30” Heavy Duty Workstand48” Heavy Duty Workstand

Other sizes available. Please call for further details.

• Industrial Type IA, 300 Ib. duty rating.• Large 12" x 18" embossed platform for easy access and added comfort.• Flared legs provide a wide tip-resistant base for added safety.• Slip-resistant rubber treads attached to heavy-duty aluminum angle feet provide

sure footing.

Heavy-Duty Non-Magnetic Work Stands

Rugged Non-Folding Non-Magnetic Process Workstands

Super Heavy Duty Work Stands

Our non-magnetic stepladder is designed and manufactured for those companies and applications that require the very best.

• Each step is braced front and back with 4 gussets and attached with 16 rivets per step for added strength and durability. • Hinge connections are secured with shoulder bolts and self-locking nuts to permit tension adjustments. • Tool holes in top for added convenience. • 4" deep slip-resistant ribbed steps provide sure footing. • Back legs are heavily braced with gussets for added rigidity. • Heavy-duty spreader brace holds ladder securely in the open position. • Large 11/2" wide angle feet with thick rubber tread provide sure footing.

Allows complete access to all parts of the scanner for maintenance or repair, as well as access to areas of the room that are normally hard to reach. • Constructed of 100% non-magnetic materials • Adjustable platform heights, 40", 50" and 60" • Large 20" x 36" slip-resistant platform • Folds to 42" H x 25" W x 15" D for easy storage • 2" rollers allow for easy Tilt-N-Roll moving • Removable two-sided handrail system with 42" high guardrail, midrail and 4" toeboard provides for added safety. Can be installed on one side only or two adjacent sides.

mri

acce

ssor

ies

72

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Lbs1518

moDeL03-SPL-103-SPL-2

HeIgHt2’3’

PLatform sIze13 1/2” x 15”13 1/2” x 15”

overaLL HeIgHt56”68”

bottom WIDtH DePtH

19” 26”20” 32”

• Industrial Type I, 250 Ib. duty rating. • Large 13 1/2" x 15" slip-resistant diamond tread platform provides a comfortable

standing area when working at a fixed height for extended periods of time. • Lightweight, easy to carry and set up, folds easily for storage • 30" high handrail provides an extra level of safety.

Item Number: Description03-SPL-1 2’ Non-Magnetic Folding Platform03-SPL-2 3’ Non-Magnetic Folding Platform

Non-Magnetic Platform Ladder

Non-Magnetic Folding Platforms

Heavy Duty Non-Magnetic Stepladder

Lbs2637

moDeL03-100H-0503-100H-07

HeIgHt5’7’

oPen DePtH37”49”

bottom WIDtH23”26”

Item Number: Description:03-100H-05 Super Heavy Duty 5’ Non-Magnetic Stepladder03-100H-07 Super Heavy Duty 7’ Non-MagneticStepladderother sizes available. Please call for details.

Show your professional pride with these unique MRI shirts. The soft grey of the shirts provide an excellent backdrop to the MRI images. These quality shirts are available in T-shirt, tank top, and sweatshirt styles. Each style is available in Medium, Large or Extra Large

mri

acce

ssor

ies

73

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



IV poleSee page 14 for details

MRI Apparel

Mayo and Solution Stands See page 38 for details

Step Stools and Chairs See page 37 for details

Utility and Supply Carts See page 38 for details

Custodial Products. See page 75 for details

Anesthesia and Emergency Carts. See page 20 for details.

Non-Magnetic MRI Scissors These non-magnetic MRI Scissors feature advanced ceramic blades, which will never rust, pit or corrode, making them ideal for use in medical environments.Their long-lasting sharpness is achieved by the hardness, straightness and precise alignment of the advanced ceramic blades. Non-magnetic and non-conductive, the blades feature safety blunting and proper alignment. 1.8” Blade Length - Handles Constructed of Polypropolene Resin, Blades Constructed of Advanced Ceramic

Item Number 03-CS-124 Description Non-Magnetic MRI Scissors

MRI Name Tag Holders

Safely wear your nametag on a totally nylon and plastic lanyard. These 3/4” wide Breakaway lanyards are maroon in color. The 38” long flat woven nylon lanyard comes complete with a hook and a vertical top load name badge holder. This holder will accommodate badges up to 2 1/8” x 3” badges.

Item Number: 03-2WHI-4000

Description: MRI Nametag Holder * Available in units of 10.

74

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



These MRI Bins maximize your work space and give your work area a neat appearance.

Double, triple, even quadruple your storage space. Easy to maintain and clean. Lightweight and easy to move. Easy to stock and retrieve supplies. Compartments conveniently store loose items. Easily view your supplies. Sturdy PVC construction. Easy-open doors. Open storage for quick access to consumables. Available in a variety of colors, sizes and configurations. Small shelf for easy access or large items.

Color Options for Bin Doors White, Smoke, Neon Red, Orange, Green, Blue

Part Number Description 03-50005 Bin, Dispensing, Top Loading, Large (3 bins) 03-50339 Bin, 8 Bins, 4-Plus-4 03-50018 Bin, 16 Bins, No Shelf (3,5,7) Adjustable03-50384+Color Bin, 1 Bin, 1 Shelf (6,8) 03-50028 Bin, 14 Bins, 2 Shelves (6.5, 8,11) Adjustable, Blue Acrylic Door 03-50408 Bin, Dispensing, Top Loading, Small (1 bin) 03-50065 Bin, 4 Bins, 1 Shelf (8,10) 03-50433 Bin, 2 Bins, 1 Shelf (7,8) 03-50074 Bin, 5 Bins, 1 Shelf (6,8,10) 03-50436 Bin, Corner Bin, 4 Bins, 1 Shelf 03-50093 Bin, 10 Bins, 1 Shelf, (6,8,10) 03-50458 Sorter, 4 compartment, with Lid 03-50117 Bin, 6 Bins, Standing Bins, with Door 03-50681+Color Sorter, 5 compartments, with Lid 03-50147 Bin, 13 Bins, No Shelf (3,5,7) 03-50486+Color Bin, 3 Bins, 1 Shelf (8,9) 03-50152 Bin, 8 Bins, 2 Shelves (5,6,8,10) Adjustable03-50669 Bin, 8 Bins, Standing Bins, No Door 03-50160+Color Bin, Dispensing, Top Loading, Medium (2 bins)

Please visit magmedix.com or call 866.646.3349, toll free for more information.

mri

acce

ssor

iesMRI Storage Bins

cust

odia

l equ

ipm

ent

75

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Custodial Cart . . . . . . . . . . . . . . . . . . . 76

Non-Magnetic Mop Bucket. . . . . . . . . . .76

Non-magnetic Mop . . . . . . . . . . . . . . . . 76

Microfiber Floor Mop . . . . . . . . . . . . . . 76

Microfiber Dust Mop . . . . . . . . . . . . . . ..77

Microfiber Dust Wand . . . . . . . . . . . . . . 77

Nonmagnetic Floor Sweeper . . . . . . . . 77

Linen Hamper. . . . . . . . . . . . . . . . . . . . 78

Stainless Steel Hamper With Lid . . . . . 78

Stainless Steel Hamper . . . . . . . . . . . 78

MagnaWand. . . . . . . . . . . . . . . . . . . . . .79

Utility Carts. . . . . . . . . . . . . . . . . . . . . . . 79

Supply Carts. . . . . . . . . . . . . . . . . . . . . 79

Hand Sanitizing System. . . . . . . . . . . . .79


cust

odia

l equ

ipm

ent

76

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



This non-magnetic mop head with handle is the ideal product for use in cleaning the floor in the magnet room.

Magmedix offers a line of specially selected non-magnetic lab carts, utility trays, step stools and custodial supplies. All of these accessories are constructed of extremely durable, lightweight materials and are suited for use within areas of high magnetic fields. (Wheels and casters are also non-magnetic.)

Smooth, easy to clean surfaces and loaded with features engineered to save you time and money. No assembly required. The Custom Custodial Cart contains mop bucket, wringer, warning sign, trash bag (requires liner), and three storage shelves.

Item Number: Description:03-CC50 Custom Custodial Cart

Custodial Carts

Non-Magnetic Mop

Mop Bucket

This mop bucket and wringer system reduces splashing, which means a safer environment, cleaner floors, and improved productivity.High efficiency down press wringer. Tested to exceed 100,000 wringing cycles.

Item Number: Description:03-M-1286WH Mop Head w/handle & string mop 03-M-1286R String Mop Head

Item Number: Description: 03-7577-88NM MRI Mop Bucket

Dry for dusting, wet for cleaningProfessional Grade Mop Frame & Handle, Telescoping handle to 57” Unique trapezoid shape significantly reduces dirt trails. Designed for maximum soil release when machine washed.Cleans dirt, dust, grease and grime from any floor surface. No solvents, solutions or chemicals! Eliminates the drag and friction commonly associated with all other floor mops,even other microfibers. It actually glides along the floor, wet or dry, on a cushion of air. The patented Tri-Fiber de-sign uses three types of microfibers: long, stiff monofibers let the mop glide along the floor by lifting the pad and allowing increased air flow between the stiff monofibers. Then, by pushing down on the mop, you bend the mono-fibers to expose two types of cleaning microfibers wrapped around the core monofiber responsible for superior floor cleaning performance. Finally, when you release the downward pressure on the mop, the mop pad literally springs back on the stiff monofibers. This patented union of microfibers guarantees an incredibly improved ability to collect dirt, dust and grime.

Item Number: Description:03-CP-FM145 MicroFiber Mop, 14 1/2" head03-CP-FM240 MicroFiber Mop, 24" head03-CP-FM145R Replacement Pad for 14 1/2" microfiber mop03-CP-FM240R Replacement Pad for 24" microfiber mop

Microfiber Floor Mop

77

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



cust

odia

l equ

ipm

ent

Nonmagnetic Floor Sweeper

Now you can quickly pick up dirt and debris from virtually any type of floor surface in the MRI suite - carpet, tile, vinyl or wood. This brand new Nonmagnetic Floor Sweeper cleans quickly and easily with durable rubber blades that are safe and effective on all floor types. There is nothing to plug in and no refills to buy. It even picks up the big stuff, fast, easy and convenient. Dual debris receptacles unload from the top making clean out easy, no need to hold over a waste basket to empty. Compact head is easily maneuverable in tight corners and around sensitive equipment. 7.5” cleaning path. Rubber bumper encircles sweeper to protect walls and equipment. Simply rinse clean with warm water. 10.5”x 9”x 2.5” head, 42” comfort grip handle, 3lbs.

Item Number: Description: 03-CP-FS125 Non-magnetic floor sweeper

• Long-strand microfibers capture more dust • Superior to disposable sheets & cotton mops • Professional Grade frame and handle • Telescoping handle to 57” • Washes clean, exceptional soil release • No dust treatment needed

This is the original long-strand microfiber dust mop. This mop uses unique microfibers that have millions of long-strand hooks and channels resulting in increased surface area to attract and hold more dust than disposable sheets and standard cotton dust mops. Unlike cotton dust mops, there’s absolutely no need for dust treatments or chemicals of any kind. With its swiveling head, it is great for cleaning hard-to-reach places.

Item Number: Description: 03-CP-DM150 Microfiber Dust Mop, 15" head 03-CP-DM240 Microfiber Dust Mop, 24" head 03-CP-DM150R Dust Mop Replacement Pads, 15" head 03-CP-DM240R Dust Mop Replacement Pads, 24" head

Microfiber Dust Mop

• Long-strand microfibers capture more dust• Superior to disposable sheets & cotton mops• Professional Grade handle• Washes clean, exceptional soil release• No dust treatment needed

This microfiber hand wand duster is great for cleaning any place dust collects. It uses unique microfibers that have millions of long-strand hooks and channels resulting in increased surface area to attract and hold more dust than disposable sheets and standard cotton dust mops. Unlike cotton dusters, there’s absolutely no need for dust treatments or chemicals of any kind.

Item Number: Description: 03-CP-DHW6 Microfiber Hand Dust Wand,6"03-CP-DHW15 Microfiber Hand Dust Wand,15"

Microfiber Hand Dust Wand

78

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



cust

odia

l equ

ipm

entLinen Hamper - PVC

Designed for easy release and removal of plastic liner or leakproof bag • Eliminates excessive bending and lifting • Plastic-coated wire hangers hold plastic liners or leak-proof bags in place • Foot-pedals standard • Available with mesh or leakproof bags • Mesh zipper-front bags require the use of 39 gallon plastic liners to be supplied by the customer • Washable leak-proof bags are available Item Number: Description: 03-LH21 Linen Hamper

Stainless Steel Linen Hamper With Lid

This Stainless Steel Linen hamper is available with or without a foot-operated lid. It is 36" tall with an outside diameter of 18" and an inside diameter of 16 1/2". Hamper has 2" dual wheel casters. Laundry bag sold separately.

Item Number: Description:03-LHSS-L Stainless Steel Hamper with Lid

03-LHSS-LF Stainless Steel Hamper with Lid & Footpedal (Shown Right)

03-LHSS-BAG Laundry Bag for Stainless Steel Hamper

This Stainless Steel Linen hamper is 36" tall with an outside diameter of 18" and an inside diameter of 16 1/2". Hamper has 2" dual wheel casters. Laundry bag sold separately.

Item Number: Description:03-LHSS Stainless Steel Hamper03-LHS-Bag Laundry Bag for Stainless Steel Hamper

Stainless Steel Linen Hamper

79

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



MagnaWand Cleaning and Disinfectant Instrument

Hand Sanitizing System

This waterless and towel-free hand sanitizing system should be in every MRI suite, and should be used by the technologists between every patient. It greatly reduces the spread of illness from patient to patient and can also reduce technologist call-out frequency due to ill-ness.Item Number: Description:03-03226 Dispenser03-02685 Refills (case of 12)

Item Number: Description: 03-wandkit MRI Magna Wand Kit (1 wand, 1 24oz. bottle Steris Spray, 25 Disposable pads) 03-100D 100 Disposable Pads 03-300D 300 Disposable Pads 03-500D 500 Disposable Pads 03-Steris Steris TB Plus Disinfectant, 24oz bottle 03-WANDDIS Dispenser for Disposables03-WANDHOOK Extra Hook to hang handle

MagnaWand tool is a dynamic idea intended to make the radiolo-gy areas safer, cleaner and a more enjoyable environment to work and stay in. Initially designed to be used exclusively in the MRI bore and PET scanner tunnel, it is also recommended for CAT scanner areas, X RAY units, or any radiology equipment where patients are scanned routinely every day. The Magna-Wand disposable pad is for mild clean-ing and disinfecting. MagnaWand comes with a self adhesive hook for hanging.

Item Number: Description: 03-UTC55 18” x 31” Cart, 37 1/2” high, 300 lb. capacity 03-UTC00 16” x 30” Cart, 32 1/4” high, 400 lb. capacity03-UTC97 16” x 30” Cart, Middle Shelf Fits 03-UTC0003-UTC20 24” x 36” Cart, 32 1/4” high, 400 lb. capacity 03-UTC98 24” x 36” Cart, Middle Shelf, Fits 03-UTC20

Utility Carts

Conveniently store your supplies in this useful, transparent, organiz-ing system on wheels. Constructed of high quality PVC and polypro-pylene. 3" easy-roll casters (2 are locking).

Item Number: Description: 03-CNAC31 44” High PVC Supply Cart03-MDPC 6 Drawer PVC Multi-Purpose Supply Cart

cart is 44"H x 26"W x 16"D 3 large supply drawers (each is 7"H x 19"W x 14"D) Bottom storage shelf is 26" x 16"

cart is 60" H x 26”W x 16”D 6 large supply drawers

(each is 7"H x 19"W x 14"D)

Supply Carts

cust

odia

l equ

ipm

ent

03-UTC5503-UTC00, 03-UTC20

An acrylic dispenser is now available to hold 30 disposables.It can be easily wall-mounted (strong self-adhesive) or can stand alone on counter top

cryo

gen

acce

ssor

ies

80

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Face Shield . . . . . . . . . . . . . . . . . . . . . 81

Fill Kits . . . . . . . . . . . . . . . . . . . . . . . . . 81

Flowguage . . . . . . . . . . . . . . . . . . . . . . 81

Gloves . . . . . . . . . . . . . . . . . . . . . . . . . 82

Heat Gun . . . . . . . . . . . . . . . . . . . . . . . 82

Nitrogen Dewars. . . . . . . . . . . . . . . . . . . 83

Liquid Nitrogen Transfer Lines . . . . . . . 83

Helium Dewars . . . . . . . . . . . . . . . . . . . 84

Liquid Helium Transfer Lines . . . . . . . . . 84


cryo

gen

acce

ssor

ies

81

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Combine Comfort, Protection and Low Cost for an Unbeatable Value. Available with or without a bottom plastic cap to provide additional protection. Wrap-around shield pro-tects both sides and front of face.

Antiwarp design resisits dimensional distortion from heat and moisture. Free-floating, ratchet drop-down head gea with full tension adjustment provides added comfort.Window is 8" H x 0.040" thick.Full face shield ( 03-0A-875)

Item Number Description03-0A-875 Cryo Face Shield

Cryogen Handling Face Shield:

Quench Protection:Discontinue using old, pieced together equipment for pressurizing helium storagecontainers which were never meant for helium fills. Avoid ice blockages due to inefficient equipment. Avoid quench related down-time of 2-3 weeks, if not longer. Reduce the cost of having samples run outside. Avoid potentially having to replace the magnet at a cost of hundreds of thousands of dollars. Steer clear of paying thousands of dollars to recommission a magnet with little or no money left in the budget. Constructed entirely of non-magnetic materials for pressurizing liquid heliumdewars wherever a high magnetic field is present.

Safety:This kit is used to safely and accurately pressurize a helium storage vessel by regulating the flow of gas from the helium gas cylinder. This allows accurate control of the liquid helium flow into the magnet, ensuring a proper cryogen fill.

Magmedix flowgauge bodies are cut and precision machined from solid, clear acrylic plastic blocks. This construction not only produces a handsome finished product, but permits complete visual inspection. Magmedix is able to provide you with a variety of Helium and Nitrogen level gauges for your magnet. Please specify Helium or Nitrogen gauges, and Magnet type when ordering

Item Number: Description03-VG-228 Helium Level Gauge for Varian R2D2 Magnets03-VG-4040 Nitrogen Level Gauge for R2D2 Magnets03-OG-050 Helium Level Gauge for Oxford/Bruker Magnets03-0G-4400 Nitrogen Level Gauge for Oxford/Bruker

Item Number: Description:03-C1000 Pressurizing Kit

Helium Pressurizing Fill Kit:

Flowgauge

Caution: Not intended for immersion in liquid nitrogen or other cryogenic liquids!

Lightweight Cryo-Gloves These are multi-layer insulated gloves designed to provide protection to the hands and arms from the hazards encountered when working with ultra cold. • Lightweight, flexible, and durable • Excellent dexterity • Very comfortable to wear for extended periods • Extremely warm • Available in wrist, mid-arm, and shoulder length • Available in small, medium, large and extra large sizes

Item Number: Description:03-SA3002 Cryo Gloves Light Weight

Zetex Leather Palm GlovesExcellent heat and cut protection. Leather wraps completely around thumb for increased wear life. • 10-oz. wool lining for extra heat protection • Molten metal splash - resistant • 14” length • One size fits all

Item Number: Description:03-SA3001 Zetex Gloves with Leather palms

Zetex Aluminum Backed GlovesReflects heat away from hands. Aluminized back reflects 90% of radiant heat, keeping hands protected for longer periods. • 10-oz. wool lining for extra heat protection • Molten metal splash - resistant • 14” length • One size fits all

Item Number: Description:03-SA3003 Zetex Gloves with Aluminum Backing

cryo

gen

acce

ssor

ies

82

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Ideally suited for defrosting cryogen transfer lines and magnet stacks after filling magnet. • Temperature output is 399-538 ºC • Voltage requirements 120 VAC • Amperage requirements 14.5 Amps • Wattage requirements 1740 Watts • Power cord 6' length

Heat Gun is Not MRI Safe

Item Number: Description:03-3149K84 Heat Gun

Cryogen Handling Heat Gun

Cryogen Handling Gloves

Portable liquid cylinders are intended for low pressure transportation, storage and convenient dispensing of liquid Nitrogen. The design is rugged but simple featuring construction of stainless steel inner vessel and either carbon steel or stainless steel outer jacket making these containers a natural choice wherever liquid cryogens are required. FEATURES:• No liquid nitrogen shielding required• Lightweight but rugged construction stands up to trucking and everyday abuse• Suitable for air transport• All welded construction• Lowest loss rates in industry• All units with permanent or removable dolly• Easily removable and interchangeable manifolds

110 LIter caPacIty moDeLs:



cryo

gen

acce

ssor

ies

83

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Model No.03-CL-110-C03-CL-110-PB-C

Capacity110110

Diameter20”20”

Height48”49 1/2”

Weight173 lbs.174 lbs.

Loss Rate % per day1.8

1.8


Capacity160160

Diameter22”22”

Height53”54”


Loss Rate % per day1.41.4


Capacity240240

Diameter24”24”

Height59”59”


Loss Rate % per day.91.2

For the most demanding applications 03CFCL vacuum jacketed hose provides efficient low-loss transfer of cryo-genic liquids. These lines are particularly suitable where large liquid losses cannot be tolerated or for continuous flow systems. When only intermittent low volume transfers are required, the 03CFLJL un-insulated flexible hose is the ideal choice for providing convenience and economy. This particular type of hose is offered with an option of ARMAFLEX foam, which adds insulating properties. Both 03CFCL and 03CFLJL hoses are furnished with a protective braid covering for extended life. A wide variety of termination fillings are available to satisfy customer requirements.Sizes range from 3/16 to 11/4 ID.

Item Number: Description:03-CFCL Non-Magnetic Liquid Nitrogen Line03-CFUL Non-Magnetic Liquid Nitrogen Line

The Models 03-CFCL and 03-CFLL can be supplied in various lengths orconfigurations with numerous options, so when ordering please specify.

Liquid Nitrogen Dewars

Liquid Nitrogen Transfer Lines

cryo

gen

acce

ssor

ies

84

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



caPacIty

35

68

100

275

540

1077

DIameter

20”

24”

24”

32”

42”

54”

WeIgHt

120 lbs.

190 lbs.

220 lbs.

450 lbs.

675 lbs.

1300 lbs

Loss rate % Per Day

2

1.5

1

.8

.7

.5

HeIgHt

48”

51”

59”

64”

72”

NoNstaNdard

moDeL no.

03-CMsH-30

03-CMsH-60

03-CMsH-100

03-CMsH-250

03-CMsH-500

03-CMsH-1000

Model 03CFHT is a fully flexible liquid helium transfer tube that can actually be bent into an eight inch radius without developing thermal shorts. The tube eliminates the need for storage Dewar lifts and can be maneuvered around instrumentation. The flexible sections and legs are made of stainless steel and a vacuum valve is supplied for re-pumping.Features: • Adjustable pressurizing valve • Removable tips • Vacuum jacketed flow control valve • Foot valves • Bayonet connections

Item Number: Description:03-CFHT Non-Magnetic Liquid Helium Line

The Model 03CFHT can be supplied in various lengths or configurations with numerous options, so when ordering please specify.







Liquid Helium Transfer Lines

Liquid Helium DewarsPortable liquid cylinders are intended for low presure transportation, storage and convenient dispensing of liquid Helium. The design is rugged but simple featuring construction of stainless steel inner vessel and either car-bon steel or stainless steel outer jacket making these containers a natural choice wherever liquid cryogens are required.

Features: • No helium gas circulation required • All Welded construction • Lightweight but rugged construction stand up to • Lowest Loss rates in the industry and everyday abuse • Allunits with permanent or removable dolly • Suitable for air transport • Easily removable and interchangeable manifolds

star

ter k

its

85

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



Basic Starter Kit #1 . . . . . . . . . . . . . . . 86

Basic Starter Kit #2 . . . . . . . . . . . . . . . 86

Comprehensive Starter Kit #3 . . . . . . . 87


star

ter k

its

86

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



This kit was developed primarily for outpatient centers that cater to patients needing non-emergency diagnostic imaging. This is the minimum amount of equipment needed for a safe and smoothly run imaging center.

1 each Non-Magnetic Utility Cart 24” x 36” x 32 1/4”, 400# Capacity, w/Center Shelf, 03-UTC98(not pictured)1 each Non-Magnetic Mercury BP Manometer, Pole Mount, 03-E10021 each Non-Magnetic Stethoscope, 03-E10031 each Non-Magnetic Linen Hamper w/ Foot Pedal and Lid, 03-LH211 each Non-Magnetic Custom Custodial Cart, 03-CC501 each Non-Magnetic upholstered Stool, 03-CHM80361 each Hand Held Metal Detector (Not non-magnetic), 03-PD1401 box Ear Plugs, 200 pairs per box, 03-JB-70311 each Non-Magnetic Water Mist, Fire Extinguisher, 03-B-270NM*1 each Non-Magnetic Water Mist, Fire Extinguisher, 03-B-272NM*2 each Plastic High Magnetic Field Danger Sign, English, 03-E8819B 2 each Plastic High Magnetic Field Danger Sign, Spanish, 03-E8819C1 each Non-Magnetic Hand Sanitizing System, 03-02685 1 each Non-Magnetic Chain and Stanchion Kit, 03-SA10001 each Non-Magnetic 7 Piece Hand Tool Kit, 03-T1000

This kit is intended for use in outpatient centers where most patients are ambulatory, but there is more need for patient assistance. Kit # 2 contains items as above in kit #1, plus these additional items:

1 each Non-Magnetic Oxygen Therapy Kit, 03-V10001 each Non-Magnetic Wheelchair with I.V. Pole & E cylinder holder, 03-FF271 each Non-Magnetic Step Stool with Hand Rail, 03-13900-11 each Non-Magnetic Prism Glasses for Patient, 03-84511 each MRI Mini Sound System w/ Radio & Operator Microphone and patient headsets, 03-76-965-M

All new MRI suites, before they scan their first patient, need to be furnished with a minimum selection of non-magnetic and MRI suitable equipment. Here we offer, at a highly attractive price, basic selections of items neces-sary for the safe and smooth operation of new MRI facilities, for both outpatient and acute care settings.

Basic Startup Kit #1(right)

Basic Startup Kit #2: (left)

star

ter k

its

87

Don

’t se

e it?

Cal

l -

To p

lace

an

orde

r cal

l To

ll Fr

ee: (

866)

646-

3349

Fa

x:(9

78) 3

43-9

616



This kit was assembled for MRI suites within the acute care setting where a more intensive level of care is necessary.

1 each MRI Pulse Oximeter, 03-7500FO1 each Adult/Pediatric Fiber Optic Sensor for MRI Pulse Ox, 03-8000FC-20 (not shown)1 each MRI Ventilator 03-MAG11 each MRI Blender w/ Oxygen and Air Supply Hoses, 03-100301 each Non-Magnetic Ventilator Stand, 03-0S100A1 each Non-Magnetic Oxygen E Cylinder, 03-V100E*1 each Non-Magnetic Air E Cylinder, 03-870A-Air* (not shown)1 each Non-Magnetic Oxygen Regulator for E Cylinder, 50 PSI, 03-3-250A1 each Non-Magnetic Air Regulator for E Cylinder, 50 PSI, 03-3-250AA1 each Non-Magnetic Crash Cart (Portable Suction), 03-CODE1-MRI1 each Non-Magnetic Portable IV Pole, 03-IV300A1 each Non-Magnetic Fixed Stretcher, 03-PH10041 each Non-Magnetic Patient Slider Board, 03-PTB621 each Non-Magnetic Mayo Stand, 13” x 19” Tray, 03-SS83181 each Non-Magnetic Double Step Stool w/ Two 41” Hand Rails, 03-410961 each MRI Complete Stereo System for Control Room and Magnet Room (substitute for mini system in kit #2.), 03-76-965

* Magmedix strongly recommends that all MRI facilities have sufficient MRI Safe gas cylinders and fire extin-guishers on hand to ensure that no non-compatible units are in the general area of the MRI. It has been shown that in an emergency staff or others with access to the MRI do not stop to check compatibility.

Comprehensive Startup Kit #3

MINIMUM oRDER: No minimum order required.

CoNFIRMING oRDERS: If customer’s policy requires a confirming order, it must be clearly marked “CONFIRMING”.

PRICES: Prices are U.S. currency and are subject to change without notice.

PAyMENT: Credit card orders are authorized electronically within 24 hours. Personal checks take approximately 7 days to clear before shipment. There is a A $25.00 charge for returned

NSF checks.

oPEN ACCoUNT: Terms are Net due from the invoice date. A service charge of 1 1/2% per month will be added to past due accounts. To establish a credit line with Magmedix, please provide

bank name, address, phone number, and contact person along with bank account number and three business references. ** On FIRST order, or if this is a NEW business started within the last

6 months, payment should be made by check or credit card while credit is being established.

SHIPPING: Charges for shipping, handling, insurance, and packaging (SHIP), are added to invoice and payable by customer. F.O.B Shipping Point and insured for full value. Most shipments

are sent by UPS unless otherwise specified. Large truck shipments are sent freight collect or prepaid and added to customer invoice. Shipments by air or other special methods can be request-

ed. If the purchaser elects to have goods shipped via their own carrier, and pays that carrier directly, the SHIP charge will only include handling and packaging.

BACK oRDERS: All back-ordered items shipped as soon as stock is received. No item will be invoiced until shipped.

DAMAGES/SHoRTAGES: Upon receipt of shipment, inspect for parcel shortages or damages. Note the problem on the bill of lading and notify the carrier immediately to initiate a customer

freight claim. Claims for merchandise damaged during transport must be made directly to the transport company.

RETURNS: No merchandise is accepted without obtaining a return authorization from Magmedix. Requests for return authorization must be made within 10 business days of receipt of goods.

Authorized returned merchandise, unless defective, must be unused and in resaleable condition. There is a 20% restocking charge on all returned merchandise, excluding defective merchan-

dise, and the customer is responsible for all freight charges. On a paid invoice the customer will be issued a credit memo.

WARRANTy: Products sold by Magmedix are fully warranted for 30 (thirty) days to be free from defects in material or workmanship. Manufacturers may provide additional warranties and may

be applicable to customers in a particular case. Neither Magmedix nor the manufacturers may be held responsible for customer’s use or misuse of merchandise and limit their obligation to

replacement of product. Copies of manufacturers warranties are available to customers upon request. After the warranty expiration period, Magmedix, Inc., may provide service for a customer

and the customer is charged at Magmedix, Inc.’s then current prices for materials, parts, labor, and shipping costs. Magmedix, Inc. does not warrant the loss, damage or defects of any product

that is the result of shipping, storage, accident, abuse, alteration, misuse, neglect, fire or other hazard, failure to use reasonable care, or lack of routine maintenance and care.

LIMITATIoN oF LIABILITy: IN No EVENT WILL MAGMEDIX, INC BE RESPoNSIBLE FoR INCIDENTAL DAMAGES, CoNSEQUENTIAL DAMAGES, oR CoMMERCIAL LoSS

HoWSoEVER CAUSED UNLESS PRoHIBITED By LAW. MAGMEDIX, INC.'S LIABILITy SHALL IN ANy CASE NoT EXCEED THE PAyMENT RECEIVED FoR THE PRoDUCT

FURNISHED To THE CUSToMER. THIS WARRANTy IS IN LIEU oF AND EXCLUDES ALL oTHER EXPRESS oR IMPLIED WARRANTIES, INCLUDING BUT NoT LIMITED To

MERCHANTABILITy, FITNESS FoR A PARTICULAR PURPoSE, USE oR APPLICATIoN, AND ALL oTHER oBLIGATIoNS oR LIABILITIES oN THE PART oF MAGMEDIX, UNLESS

PRoHIBITED By LAW.

88Visit Us Online at www.magmedix.com


BILL To - Company Name: Attn:Address: City: State: Zip:Phone: FAX:SHIP To: Company Name: Attn:Address: City: State: Zip:Phone: FAX:Purchase Order # Date:Ordered By: Phone: Fax:Your Location: Bill To: Ship To: Other: Qty Unit (ea, pkg, cs) Item Number Item Description and page # Size Unit Price Total

Merchandise Total Shipping & Handling (call for charges if paying in advance) Total Amount

Check or Money Order Enclosed C.O.D.American Express # Master Card # Visa #Print Name: (as it appears on card) Expiration Date:Signature:

Magmedix, Inc. 160 Authority Drive Fitchburg, MA 01420

Order By: Internet • Phone • Fax • Mail

24 Hour Fax 978-343-9616 Call Toll Free 866-646-3349

table of contents - can-med healthcare · 2010-10-26 · from the mri scanner room we can offer...

Documents