table of contents - scientific.net · fabrication of taper gap warm end heat exchanger in coaxial...
TRANSCRIPT
Table of Contents
Preface, Sponsors and Committees
Chapter 1: Modern Design Theory and Technology
Design and Analysis of Fan-Cooling for High Speed Permanent Magnet Machine RotorJ.Q. Xing, L. Chen, Q. Zhang and Y.F. Ma 3
CAD Modeling of Part Assemblies Using Reverse Engineering TechniqueR. Pescaru and G. Oancea 7
Variant Design of Hydraulic SupportY.Y. Shao, Q.L. Zeng, G.T. Xuan and X.X. Liu 11
Research on Multi-Objective Optimization Design of Thrust Vector Control ActuatorJ. Zhou, J.L. Zhang and F.Q. Zhou 15
Frictional Contact Problem Study on Compressor by a Parametric Quadratic ProgrammingMethodA.H. Liao 21
Evaluation Method for Conceptual Design Scheme Based on Fuzzy MathematicsP.F. Tian, S. Yan and B.R. Li 25
Revolving Jet Nozzle Design on Eliminate Surface Soil of Shallow SubmersionD.S. Zhang, G.L. Cheng and Z.L. Liu 30
Design Methods of Pine FurnitureL.H. Tang and W.J. Liu 34
On the Feasibility of Green Packaging from the Use of BambooN.N. Cai 40
The Green Design of Bracket of Scraper Part of Coal Mine Underground HorizontalExtension Transfer MachineP.H. Mao, L. Ding and J.X. Li 44
The Design and Analysis of the Column of the Small Dual Fork Stacking RobotH.X. Wen and Q.F. Zhao 48
Research and Implementation of Variant Design for Longitudinal Roadheader’s CuttingUnitY. Yang and J.Q. Hu 52
Design of Compound Die for Flange Drawing PartsF.R. Nie, F. Tian and Z.Z. Gu 56
A Multi-Point Approach to Airfoil Shape OptimizationK. Huang, Z.J. Meng and J. Huang 59
Overview Design Method of MEMS Devices SystemH. Zhang, C. Chen, T. Wang, S.M. Ma, Y.N. Deng and H.X. Zhou 63
Analysis and Design of the Reliability of a Wire Setting SystemL. Hong, H. Zhang and Q.T. Fan 67
Innovative Design of Pin Tumbler Lock Based on TRIZF. Wang, D.P. Yu and J. Yao 71
Building Input File of MCNP 3D Model with Basic Graphics Exchange SpecificationA.H. Chen, M. Xia, Y.H. Tang and Y. Zhang 77
The GREEN Design of Horizontal Type Transfer Machine for Underground Coal Mine BeltDepartmentP.H. Mao, J.X. Li and L. Ding 80
Force Analysis on the Opening/Closing Mechanism in the Door of Coal Hopper Car Basedon the Matrix MethodC.Y. Wan, X. Zhao and P.X. Li 84
Product Form Design Based on the Symmetry Principle of GestaltY. Tian, Z.B. Qu and X. Kong 88
Compound Helicopter Optimum Design Based on Genetic AlgorithmF. Wang and M. Chen 92
Structure Research on Carrying Frame in Portable Exoskeleton Make by PolyphenyleneSulfideF. Liu, W.M. Cheng and Y. Zhou 96
The Research of Personalized Glasses Custom Design SystemY. Chen 102
A Design of a Small Self-Propelled Mower by Building the Key Curves Based on theInternal StructureS. Liu, Y.Q. Wang, L. Wei and D.C. Wang 106
The Form Beauty of Product Form Design – The Unity and VarietyY. Wen and H. Sun 112
On the Three-Dimensional Relationship of Design, Consumption Psychology and SocialDevelopment in Green PackagingD. Bi 115
Plastic End Cap Injection Tool Design and Molding Analysis Based on Software Ug andMoldflowY. Xia 119
Optimization Design of the Crane Girder Based on Adaptive Genetic AlgorithmP.F. Wang and X.H. Diao 123
Design and Analysis of Folding Mechanism for a New Folding CarL.J. Zhao, Y. Li and H. Chen 127
Multidisciplinary Design Optimization for an Earth Observation SatelliteX.H. Wang, Y. Xu and R.W. Xia 132
Study on the Strength Design for Steel Hourglass Worm Pairs of Track Tension Adjustoron Special VehiclesZ.J. Li and Y. Yang 136
Design of the Quad-Redundant Generators Based on CAN-Bus and Nonlinear PIDY. Zhou, Y.F. Zhang and Q.X. Zhou 140
Research on Similarity Scaling of Structure for Compressor DiscD.K. Tian and X.Y. Liu 144
A Study on Using Plasticity Theory in the Design of the Transit Platform’s PanelY.Y. Teng, D.S. Dong and H.Q. Qiu 148
The Improved Design for Automatic Feeding Mechanism of the Injection Molding Machinefor the Negative Electrode Shell of Li/Mn02 Button Cell Battery Based on TRIZ ConflictionTheoryX.D. Zhang and S.Z. Lin 152
Interface Design Based on Task Model of Tower Crane Security Monitoring andManagement SystemZ.B. Qu, Y. Tian and Y. Song 158
An Introduction to Cloud DesignJ.X. Lu, C.D. Lu and P. Wang 163
Workshop Layout Optimization Based on Genetic AlgorithmL. Qiao, H.B. Yu and J.J. Sun 169
The Design and Implementation of Spacecraft Co-Simulation PlatformH. Yin, Y.M. Gao, C. Wang and X.X. Li 174
Design and Characteristic Analysis of Variable Speed Hydraulic SystemY.J. Zhou and J. Xu 179
Conceptual Design of Controllable Soft Start Device with Differential Planetary Gear-TrainsJ. Han and H.J. Liu 183
Mechanical Structure Design of Vacuum Holder Disk Head Cleaning MachineD.W. Li and Q. Feng 187
Application of Value Engineering in Industrial Product DesignW.X. Duan 191
Optimization of the FSAE Car Steering TrapezoidZ.P. Liu, G. Zhu, J. Li and S.H. Yu 196
Performance Analysis of Infrasound Sensor InSAS2008H.N. Feng and Y.C. Yang 201
b Manufacturing Engineering and Automation II
The Current Situation Analysis of Industrial Design and Development ManagementProposal Based on Manufacturing in Central RegionsL.L. Wang 205
A Study on Natural Bionics in Product DesignH. Xie 209
Packaging Structure Optimization Design Based on Low-Carbon Packaging IdeaB.R. Li, Z.R. Li and P.F. Tian 214
The Design of Injection Mold for the Handset Based on Reverse EngineeringH.X. Wen and Q.X. Wei 219
Design and Analysis of Vacuum Coating's Filtration SystemH. Wang, K.T. Li, W.F. He and Z.H. Tan 223
A Method of Structure Analysis for Complex Small HAWT Composite Blade DesignS.F. Wei and C.Y. Lin 227
CFD Analysis and Blade Optimization of a Small Horizontal Axis Wind TurbineC.Y. Cheng, D.H. Song and G.C. Tsai 231
Design & Research of People-Oriented Office ChairH.B. Yang and Y.T. Feng 236
Research and Design on the Special Tube Parts Stamping Technology and DieY.R. Li, H.Y. Zhang and A.M. Wang 241
Development of Active Rehabilitation Device of Hand JointH.C. Huang, W.H. Kao, T.S. Wei, S.Y. Liu, Y.S. Syu and P.D. Liu 245
Design of New Dual-Motor Independent Drive System for Electric VehicleW.W. Wang, C. Lin, W.K. Cao and J.Y. Chen 251
An Improved Design of the Manipulator on Automatic Tool ChangerY.S. Li, Y.H. Zhang, H.X. Sun, H.Y. Dong and S.L. Zhao 259
Development for CAD / CAM System of Modification Slotting Cutter’s Design andManufacture for High-Speed and Heavy-Loading GearL.B. Hu, B.W. Li, S. Li and Y.B. Hu 263
A Design of the Automatic Spray System of Belt Conveyor’s Loading PointY.C. Guo, J. Zhang and K. Hu 267
The NC System Design for Strengthening and Polishing MachineJ.H. Tao, H. Liu, X.C. Liu and X.J. Fei 271
Rotogravure Printing Press Remote Maintenance System for Customer Service SupportQ.S. Jiao, D. Li and Y.H. Zheng 276
Research of Rapid Assembly for Standard Parts of Three-Dimensional ModelJ. Zhang, F.P. Zhang, X.F. Duan, B. Gao and J. Han 280
Design and Pspice Simulation on Interface Circuit of Capacitive Micro-GyroscopeY.B. Shi, X.J. Zhao and J. Liu 284
Research on Design and Test of Negative Pressure Isolator System for Infectious DiseasePatients Based on Multi-Cavity Gasbag StructureM.X. Hu, S.J. Liu, X.W. Xie, Z.J. Du, F. Tian, Y.J. Zhang and W.Y. Gao 288
Study on Matching Design of Motorized Wheel for Urban Electric VehicleW.H. Yang, Z.F. Fang and K.D. He 292
Design of Armored Vehicles Lead-Acid Battery State Monitoring SystemG. Li, Y.C. Xie, G.S. Li and N. Wei 296
Chapter 2: Advanced Manufacturing Technology
A Magnetic Drive Actuator for Micro Electrical Discharge MachiningX.Y. Zhang, A. Kifuji and D.J. He 303
Laser Drilling on Elastomeric PolymersC.L. Kang, Y. Xu, K.L. Yung, W. Chen and H. Liu 307
Performance of Cutting Tools in High Speed Milling of SiCp/Al CompositesY.J. Wang, M.Q. Pan, T. Chen, J.Z. Liu and L.G. Chen 311
Performance Study on Miniaturized Rapid Denture Repair SystemL. Zhang, F.F. Tu and J. Wang 315
Liangchi Zhang, Chunliang Zhang, Jeng-Haur Horng and Zichen Chen c
Electrical Discharge Truing of a Vitrified Bonded Superabrasive Wheel with ElectricalConductivityM. Iwai, S. Ninomiya, T. Ueda and K. Suzuki 319
The Performance of a Diesel Engine Blended with Coffee Bean Residue Pyrolysis OilS.Y. Yang, M.S. Wu, C.Y. Wu, K.H. Chen, T.M. Wu, Y.L. Hsu, P.H. Lin and Y.Y. Ku 325
Surface Characteristic and its Mechanism of the Drilled CFRPY.M. Quan and L.H. Sun 333
Development of Zr-Ti-N Coatings for Micro Drills for Machining of PCBsS.H. Yao, Y.L. Su and W.X. Kao 337
The Study of High Speed Micro-Drilling Performance and Machining Quality of CoatedMicro-Drills with Zr-C:H CoatingsW.H. Kao, Y.L. Su, S.H. Yao, H.C. Huang and M.S. Chen 342
Study on Electromagnetic Repulsion Suspension of CNC Machine Guide SystemX.Y. Zhang and Y.C. Zhao 347
Effect of Injection Parameters on Immersion Liquid during Wafer ScanningH. Chen and Q. Liu 351
The Optimization of Tooth Form Fitting Error on Worm Type Shaving CutterS.L. Cai, Y.W. Cai and W.T. Huang 356
Machining Feature Sequencing for Aircraft Structural PartsS.L. Chen, F.F. Yu, G.L. Zheng, B.R. Du and H.Z. Chu 361
Fabrication of Taper Gap Warm End Heat Exchanger in Coaxial Pulse Tube CryocoolerK.X. Yang, Y.N. Wu, A.K. Zhang and C. Xiong 365
The Orderly and Direction Study of Grinding Wheel Grits Based on GeomorphologicFeatureX.J. Cao, K.P. Zhang and M. Zhang 369
Grinding Characteristics and Mechanism of Ceramic Alumina Wheels on AeronauticalAlloysH.X. Zhang, W.Y. Chen, X.Z. Fu and L.X. Huang 373
Study on Free Shaving for Worm Type Shaving Cutter of Open GrooveS.L. Cai and Y.W. Cai 377
The Progress of Bionic AUV Stealth Technology ResearchY.J. Liu, X.W. Sun, Y. Li and J.B. Liu 381
Survey of Turn-Milling and Applications in AviationS.M. Yuan, Y.Z. Huang, C. Zhang and Z.G. Zhang 385
Swing Mechanism for Micro EDM Drilling of Fuel Jet NozzlesH. Tong, Y. Li and L. Zhang 391
Tool Path Calculation Based on the Actual Tool ProfileP. Zhao, W.Z. Zhao, Z.Y. Duan and W.H. Zhao 396
The Dual Implementation of Lean and ERP in ManufacturingY.X. Li, M.H. Liu and Z.L. Li 400
Temperature Measurement in Ultrasonic Vibration Mill-Grinding of Ceramics withInfrared ThermovisionG.C. Qiao and M. Zhou 405
The Method Used for Process Precision Prediction of Micro-Assembly Based on Principle ofMaximum EntropyX.F. Zhang, Z.J. Zhang, Y. Sun, X. Ye and Z.P. Ye 409
Research on Feedrate Planning Model for Continuous Small Lines Contour with Look-AheadQ.S. Jiao and S.Y. Wang 414
Research and Improvement of Leakage Protection System in Coal Winning MachineX. Chen, X.B. Xi, P. Chu, Y.C. Pei and D.L. Wang 419
Research on Vibration Drilling 1Cr18Ni9Ti Stainless Steel Micro-HoleP. Zhang, Y. Jing and X.Y. Guo 423
Improvement of Hydraulic System of New Energy Saving Die Casting MachineX.X. Zhu, W.M. Zhao and J.F. Xu 428
The Research Progress of Automatic Drilling TechnologyW. Lin, P. Yu, C.P. Zhang and P. Zhang 432
d Manufacturing Engineering and Automation II
Iso-Scallop Toolpath Generation for Orthogonal Turn-Milling of Ruled SurfacesW. Wang, F.Y. Peng, R. Yan and X.Y. Duan 436
One Effective Solution of Hot Swap ApplicationZ.J. Zhang 441
Study on Effect upon the Roughness of Bearing Outer Ring from the Jet Pressure in theStrengthening and Polishing ProcessH. Liu, J.H. Tao, X.C. Liu and X.J. Fei 445
Coaxial Adjusting Method for Irregular Rotating WorkpieceQ. Li, L.Q. Ma, Z.Y. Wang and A.B. Sun 450
Traceability Method for Transmission Quality Problems Based on Contrast AnalysisL.Z. Li and M.Y. Tsai 456
The Experiments Study of Polishing Characteristics during Polishing ProcessH.J. Tsai, H.C. Tsai, P.Y. Huang, J.H. Horng and S.J. Chiu 460
Coal Mine Underground Horizontal Extension Transfer MachineP.H. Mao, B. Zhai and L. Ding 464
Study on High Speed Machining Strategies for MoldY.X. Liu, R.S. Peng and Q. Cheng 468
Application of Pre-Mixed Abrasive Water Jet Technology on Cutting Brazilian DiscD.S. Zhang, G.L. Cheng and J. Deng 472
Study on Wafer Thinning Characteristics of Ultimate Diamond DiskX.X. Jin 476
Parameters Optimization and Experimental Analysis in High Speed MachiningH. Lin, D.Q. Gao, Z.Y. Li and J.M. Yi 480
Application Research on TorkBuster in Well Yashen 1 of Yumen OilfieldY.G. Zeng, Z.L. Wei and D.H. Liu 484
Research and Application of 9-5/8Retrievable Casing Drilling TechnologyX.L. Pei, J.L. Xu and J.R. Zhu 488
Optimization Method of Man-Machine Operating for Multi-Variety and Small BatchProductionW.Z. Chen 493
Study of a Electromagnetic Weft Insertion in Textile MachineS.M. Luo, B. Zhang, L. Tian and Z.H. Ma 498
Study on the Optimization of Conformal Cooling Channels for Plastic Injection MoldY.P. Qian, Y. Wang, J.H. Huang and X.Z. Zhou 502
Optimization of EBW Parameters for 2219 AL-Alloy Using Grey Relation MethodM. Sobih, Z. Elseddig, K. Almazy, A. Youssef and M. Sallam 507
Study on the Wetting Device of GMS-7 Spine Taping MachineC.C. Ren, J.F. Cai and C. Cheng 515
Research Advance on the Drying Section of Paper MachineZ.G. Chang, J.X. Dong and J.M. Yi 520
Chapter 3: Modeling, Analysis and Simulation of ManufacturingProcesses
Modeling and Stability Analysis of SiCp/Al Composites Thin-Walled Workpiece in RotaryUltrasonic MachiningM. Wang and M. Zhou 527
Micromechanical Modelling of Elliptic Vibration-Assisted Cutting of Unidirectional FRPCompositesW.X. Xu, L.C. Zhang and Y.B. Wu 531
Dynamic Simulation on Feedwater Heater of Nuclear Power PlantC.G. Wang, R. Yu and K.L. Zhang 535
Steady-State Load Analysis of a Caterpillar Chassis by Finite Element MethodQ.W. Qu, H.J. Yu, S.Q. Wang, T.K. Sun and J.Z. Che 541
Safety Inventory under a Periodic Review SystemA. Ma'aram and L.T.T. Kien 545
Liangchi Zhang, Chunliang Zhang, Jeng-Haur Horng and Zichen Chen e
Analysis on Crack Propagation of Roll by the Finite-ElementX.Y. Zhao, Z.C. Lang, C.F. Mao and W.N. Zhang 553
Modeling of Aircraft Composite Parts Using SimulationW.L.H.M. Desa, S. Kamaruddin and M.K.M. Nawawi 557
The Simulation and Study of Buffer Device of Hydraulic CylinderD.H. Su and X. Liu 561
Numerical Simulation on Diffusion Wear of Diamond Tool in Cutting of Ferrous MetalsM. Zhou and L. Zou 565
Finite Element Analysis on Convexity for Tapered Roller with Arc-Line ModificationProfileL.Y. Zhang, Y.J. Xue, J.S. Li and W. Ma 569
5-Axis Virtual Machining Technology Research on Integral Impeller under PROE andVericut EnvironmentY. Xia 573
Delay-Dependent Robust Stability Analysis for Uncertain Nonlinear SystemsJ. Song and K. Qiu 577
An Approach to Determine Clamping Forces and Clamping Sequence of Thin-WalledWorkpiece during Milling ProcessX.Y. Zuo, B.Z. Li, X.H. Jiang and J.G. Yang 580
Application of Error Analysis Method in the Complex Vehicle ModelS.R. Liao and T. Yang 584
Temperature Field Simulation of Ballscrew Whirlwind MillingY.F. Li, J. Song, S.H. Liu and X.C. Song 588
Study on Engine Characteristic Curves Drawing Method Based on BP Neural NetworkC.X. Guo, K. Liu, W.L. Xie and S.Y. Zhou 593
A New Method of Complex Logistics Planning Scheduling Based on Super Cubic Path LinkAlgorithmJ. Gao, W. Long and Y.Y. Li 597
Study of the Transmission System of Spreading Powder Device of Direct Metal SinteringRapid Prototyping MachineY. Liu, X.A. Dang and L.J. Yang 602
Numerical Simulation and Studies of Temperature Rise within a High-Pressure Vesselduring RefuelingC.Y. Shi, Y.C. Sun and Y.H. Sun 606
Modeling and Simulation of the Hydraulic Height Adjustment System of Mobile Tail Basedon AMESimY.C. Guo, M.J. Xing and K. Hu 611
Simulation Study on CMM Measuring Path Based on the CAD Models of Bevel GearX.B. Zhang, H.X. Shi, N. Liu and X.J. Zhou 615
Dynamic Simulation on Secondary System of Nuclear Power PlantR. Yu, S.W. Yao and C.G. Wang 620
A Heuristic Algorithm for Flowshop Scheduling ProblemD. Tang and H.P. Shu 626
Numerical Simulation of Gas-Liquid Tow-Phase Flow During Complex Mold FillingProcessJ.M. Feng and F. Jiang 631
The Research of Cognitive Load in the Virtual Maintenance TrainingC. Yu, W. Liu and G. Yang 635
Simulation Study on Heat Transfer Performance of Engine Exhaust ValveC.F. Duan, W. Li and J.L. Zhang 639
Application of Virtual Prototyping Technology on Kinematical Simulation of BalerCompression DeviceX.F. Zheng, B.W. Li and Y. Zhang 644
The Research on Characteristics of Movement Coupling in Forging ManipulatorJ.F. He, C. Xu, H. Deng and L. Han 648
Effect of Pin-Fin Heat Sink Structure and Irradiation Angle on High-Power LED Down-Light Thermal PerformanceH.L. Liu, L.G. Wu, S.X. Dai, W.J. Lin, B.Y. Zhou and X.M. Jin 653
f Manufacturing Engineering and Automation II
The Research on the Movement Precision of Globoidal Cam Mechanism Based on ErrorModelingS.P. Yang, Y. Zou, Y.Q. Tan and J.G. Liu 657
The Research on Motion Reliability Simulation of Planar Linkage MechanismC.Y. Wan, W.C. Li and X. Zhao 664
Research on Model Reconstruction and NC Machining for Blade Based on ReverseEngineeringY.Q. Zhou 670
Design and Kinematics Analysis of a New Two DOF TilterH.D. Wang, B.H. Yang, K. Zhang and Y.Q. Bi 674
Inverse Attitude Solution Model and Numerical Simulation of a 2-DOF Stabilized PlatformK.X. Li and H. Zhang 679
The Optimization of Co-Dependent and Absolutely Additive SystemX.P. Zhou and K.Z. Guo 684
The Optimized Iterative Projection Method to Determine the Width of an Arbitrary 3DObjectM. Zhou and G.L. Zheng 688
Study on Security Analysis and Management of Motor Based on Fuzzy TheoryH.C. Lu 692
The Multi-Objective Optimization for Cycloidal Gear Drive Based on theElastohydrodynamic Lubrication TheoryX.Y. Qian 697
Implementation of Decision Tree for Maintenance Policy Decision Making - A Case Studyin Semiconductor IndustryS.H. Ding, T.T. Goh, P.S. Tan, S.C. Wee and S. Kamaruddin 704
Implementation of Autonomous Maintenance in Semiconductor Industry: A Case StudyH. Ab-Samat, P.G. Khoe, W.S. Liau, H.F. Tan, W.Y. Yap and S. Kamaruddin 708
Orthodontics Simulation and Finite Element Analysis of Submaxilla DentitionD. Liu, A.L. Qu and C.X. Wang 712
Analysis of Climbing Obstacle Capability and its Influential Factors of Omni-DirectionalWheeled RobotA.C. Li, H.H. Tang, B.L. Feng and L. Li 717
Fatigue Analysis of MW Wind Turbine Top FlangeR. Zhang 722
Finite Element Analysis of Top Flanged Joint System of High Power Level Wind TurbineR. Zhang 728
Optimization of Vehicle Handing and Stability Based on RSMD.S. Sun, F. Wang and Y.P. He 733
Automobile Box Structure Optimization and SimulationW.L. Yin and G.P. Yang 737
Analysis of Support Reliability of Missile System Based on Neural NetworkT. Li, W.G. Pan, L. Chen and X.X. Ma 741
Investigation of Fracture Criterion for HTPB PropellantB. Han, Y.T. Ju and C.S. Zhou 745
The Study of Infrared Heating on PET Bottles by Experiment and Adaptive Finite VolumeMethodY.C. Hsieh, M.H. Doan and T.T.H. Pham 750
Dexterity Analysis of 6-dof 3-urpsH.L. Yun and X.N. Song 754
Ant Colony Optimization for Factory LayoutX. Zeng and Q.L. Ma 758
Abrasion Lives Simulation and Prediction of Key Parts for Breech Mechanism Based onPro/E and ADAMSX.J. Shao, L.J. Cao, G. Tian, Q. Ma, J.H. Liu and H.B. Hu 762
3D Finite Element Analysis of Prestressed CuttingR.T. Peng, F. Lu, X.Z. Tang and Y.Q. Tan 766
Research on High-Pressure Water Jet Target Object Detection Parameter OptimizationD.S. Zhang, G.L. Cheng and J. Deng 771
Liangchi Zhang, Chunliang Zhang, Jeng-Haur Horng and Zichen Chen g
3-D Precise Modeling of Modified Gear Based on Visual BasicZ.B. Zhu, J. Ji, C. Li and J.X. Rong 777
A Method to Calculate Tool Accessible Domain Based on the Point Model for the Multi-AxisCNC MachiningB. Chen, K. Liu and Q.S. Gao 781
The Research of Energy Saving Improved on Copper Anode in the Hydraulic System Basedon AMESimX.Y. Gao, Z.Y. Wu, X. Wang, Z.H. Duan, J.T. Qu and Y.H. Liu 785
Research on Support Vehicles Application New Materials of Coal Mine Belt HorizontalExtension by ANSYS SoftwareP.H. Mao, B. Zhai, L. Ding and J.X. Li 789
Modeling and Enhancement of Mckibben Pneumatic Muscle ActuatorsH. Zuo, G.L. Tao and X.C. Zhu 793
Study on Simulation of the Chain Transmission MechanismY.X. Liu, S.L. Zou, T. Tang and Q.W. Zhou 797
Investigation of Numerical Stability of Pipe-Flow Simulation under Strong Oscillation ofInlet VelocityX.G. Yi, C. Luo, D. Li and Z.L. Zhang 801
Simulation of Laser-Induced Asymmetric Bubble with Lattice Boltzmann MethodY. Deng, Z.N. Guo and Z.G. Huang 806
CNC Programming for 2D ImageH.Y. Zhang, Y.G. Zhao, Z.W. Sima and Y.R. Li 810
Modeling Developable Mesh Surface by LoftingM. Chen and H.K. Yu 814
Thermal Analysis of a Ball-Screw SystemC.C. Wei, J.H. Horng and J.F. Lin 818
An Obstacle Avoidance Method Based on Distance Fields in C-Space for Virtual ArmJ.W. Jia, J.F. Yu and J. Zhang 827
The Innovative Design and Simulation Analysis of Small Savonius Wind TurbineC.Y. Cheng and X.Q. Wei 832
Unified Product Information Modeling Using Model-Based Definition TechnologyJ. Han, F.P. Zhang, B. Gao, J. Zhang and Y. He 837
Ladle Transportation Car Frame Finite Element AnalysisP. Tang and C.H. Pan 841
Analysis and Simulation of Flow Field in the Ultrasonic Auto Backwash FilterJ. Xie and L.J. Shan 845
Research on the Wire Drawing Die Pass Parameter Calculation Based on the Least SquareAlgorithmH.X. Wen and Y.T. Yang 850
Application Research of Data Warehouse in CRMY.Q. Ou, L. Zhou and Y.P. Fang 854
The Design of Heart Sounds and Electrocardiogram Monitor System Based Atmega64Q.H. Yao and M. Cao 858
Study on Simulation & Evaluation of Radar Network Operation Capability in ComplexElectromagnetic EnvironmentJ.J. Chi, X.M. Luo, X.M. Han and B.W. Wang 862
Simulation of Spraying Trajectory Optimization for HelmetQ. Fang, K.T. Li, W.F. He and Z.H. Tan 867
Chapter 4: Material Science and Technology
Sliding Wear Characteristics of High-Performance Plasma Nitrided Bearing SteelS.G. Qu, G.H. Wang, L.K. Liu, Y. Hu and X.Q. Li 873
Active Scalable Elastomer Mold to Ease Demolding of High Aspect Ratio Micro FeaturesY. Xu, K.L. Yung and H. Liu 880
A New Method for Measuring the Residual Stresses in Multi-Layered Thin Film SystemsM. Liu, H.H. Ruan and L.C. Zhang 884
h Manufacturing Engineering and Automation II
Microstructure and Abrasive-Wear Behavior under High Temperature of Laser Clad Ni-Based WC Ceramic CoatingJ.X. Kuang, X.H. Wang and A.M. Liu 891
The Interface Behavior of Micro OvermoldingH. Liu, Y. Xu, K.L. Yung and C.L. Kang 896
Impacts on the Particle Size and Shape of Silica Sands by Different Methods of CoolingQ.Z. Sun, J. Wang, P.Q. Zhang, Z.K. Zhao, Y. Han and L. Jin 900
Failure Analysis of Axle Sleeve Made from 2Cr13 SteelD.W. Deng, J. Lu, X. Tian and C.P. Zhang 904
The Finite Element Analysis of Flow Field and Temperature Field in the Molten Pool ofSurface Treatment by Electron BeamR. Wang, G.B. Shen and D.Q. Wei 908
Atomistic Simulation on the Structure and Lattice Vibrations of Fe7-xCrxC3 CarbidesZ.F. Zhang, P. Qian, J.C. Li and J. Shen 912
Study on the Microstructure and Properties of Laser Remelted Ceramic Coatings on LowCarbon Steel SurfaceX. Jiang, F.Q. Zhang, Y.J. Jin, X.T. Qu and Z.P. Wang 917
Influence of Sputtering Power on the Structure and Photoelectric Property of Ga DopedZnO FilmsL. Wu, Q.N. Zhao, G. Wu and D.K. Miao 922
Study on the Abrasive Wear of Chromeplate Piston Ring and Cylinder Jacket Made byDifferent MaterialsW.W. Gao, Z. Zheng, J.M. Yang and Y.Q. An 927
Luminescence Properties and Energy Transfer of Sm3+-Eu3+ Co-Doped Gd2(MoO4)3 RedPhosphorsX.J. Geng, Y.J. Chen, Y.W. Tian and L.J. Xiao 931
Research on the Elastic Modulus of Single-Walled Carbon NanotubesH.M. Zheng, Z.S. Yuan, Y.J. Wang and Z.G. Jiang 935
Functions of Step Gating System in the Lost Foam Casting ProcessH. Zhou and L.H. Luo 940
Influence of Smoke on Metallographic Structure of Short Circuited Melted MarkL.T. Wang and W. Gao 945
Constitutive Modeling of the Rate-Dependent Behavior of Ti-6Al-4V Using an Arrhenius-Type LawJ.J. Xiao, D.S. Li, X.Q. Li, C.H. Jin and C. Zhang 949
The Influence of Different Subbase Materials on the Crack of Cement Stabilized MacadamBase during ConstructionX.F. Liao, F. Xiao, Z.D. Chen and L. Xing 955
An Experimental Study on Lubrication Behavior of Glass Lubricants during Hot PlasticDeformation of Ni-Based AlloysR. Li, C.Y. Sun and Q.D. Zhang 960
Experimental Inverstigation on Thermal Expansion Coefficients of SnO2 Thin FilmJ. Wang, H.L. Li and M.H. Liu 965
Test on Electrical Conductinity of Oil ShaleQ.W. Wang, Y.H. Sun and F. Yang 969
Thermodynamic Analysis of a Brown Glass Containing Fe, C and SC.S. Hu, J. Zhang, H.F. Yan and J.X. He 973
The Responses of Soft Ground Materials Subjected to Dynamic LoadingJ. He, B. Bai and Q.F. Chen 977
Preparation and In Vitro Degradation of PLGA/HA Composite Fiber Scaffolds byElectrospinningX.F. Xu 982
Study on the Tensile Testing Method of p-Phenylene Terephthalamid (PPTA) Fibers forBallistic ProtectionX.C. Huang, H. Zhou, Y. Li, C.S. Li and Y. Jiang 989
Effect of Alloying Elements on the Microstructure and Properties of AZ91D-xCa-ySrQ.Z. Sun, H.B. Wang and Y.C. Zhu 993
Comparisons of Different Elastomer Micro MoldsH. Liu, Y. Xu, C.L. Kang, K.L. Yung and W. Chen 997
Liangchi Zhang, Chunliang Zhang, Jeng-Haur Horng and Zichen Chen i
Preparation of Ni-Nd2O3 Nanocomposite Coatings by Electrodeposition under Dual-Frequency UltrasoundZ.H. Ao, Y.J. Xue, X.H. Li and J.S. Li 1001
Simulational Study on Biaxial Tensile Test of the Envelope Material of StratosphericAirshipY.B. Zhang, M.Y. Lv, S.C. Gu and J.H. Meng 1006
Study on Antireflection of TiO2-SiO2/SiO2 Double-Layer Films Prepared by Sol-GelMethodJ.Y. Lu, Q.N. Zhao, S.H. Hou and Y.H. Dong 1012
Research on the Relationship between the Impact Explosive Temperature and Mass Ratioof PTFE/Al Reactive MaterialS.P. Li, S.S. Feng, Y.X. Dong and Y. Chen 1017
Summary of Application of Chinese Copper-Clad Aluminum WireC.M. Liu 1021
Synthesis of Bauxite Based β-SiAlON by Compound Reduction NitridationY.Q. Guo and H.X. Li 1026
Study on Corrosion Behavior of Various Steels Used by Ocean Wave Energy EquipmentY.G. Wang, X.H. Tong, Y. Jiang, Y. Liu and L.S. Zhu 1030
Microstructure and Creep Resistance of Mg-(8-12 Wt.%) Zn-(2-6 Wt.%) Al AlloysX.F. Wan, H.J. Ni and M.Y. Huang 1034
Finite Element Simulation on Micro-Forging Process Inhibiting Warping of the Thin-Walled Components Treated by Laser CladdingJ. Zhou, C.J. Qiu and X.Y. Cheng 1038
Preparation and Characterization of Polyacrylonitrile-Based Nanofibers by ElectrostaticSpinningS.Y. Li, Y.W. Wang and T.W. Jun 1042
Corrosion Characteristics of 16Mn and Q235B Steel in Natural SeawaterY. Liu, X.H. Tong, B.G. Li, Y.G. Wang and L.S. Zhu 1046
Dynamical Identification Model of Laser Cladding Height in Metal Parts Laser ShapingProcessS.J. Jiang and A.Z. He 1050
Tribological Properties and Worn Surface Analysis Generated by Sulfur- and Phosphorus-Free Molybdenum-Containing Water-Based LubricantL.L. Yan, C.B. Wang, W. Yue and B. Xu 1054
Glass Fiber Functional Warp SizingL. Mao, H.L. Dai, X. Fang and L.M. Guo 1058
Research on Creep Characteristics of the Double-Base Solid PropellantJ.B. Zhang, Y.T. Ju and C.S. Zhou 1062
Influence of High-Frequency Micro-Forging on Surface Residual Stress of 304 StainlessSteel Sample Fabricated by Laser PrototypingC.J. Qiu, Y. Zhang, Y. Li and J. Ye 1067
Study of Oxidation Behavior of Zn and Fe NanoparticlesM. Wang 1071
Study on Surface Hydrophilicity of Polypropylene Non-Woven Treated by AtmosphericPressure PlasmaY. Zhang 1075
Mechanical Properties and Dynamic Mechanical Behavior for Long Aramid FiberReinforced Impact Polypropylene CopolymerH. Tan, H.S. Tan, X.L. Tang, Y.G. Wang and L.P. Li 1079
Friction Structure Effect Analysis of Granular Materials in Foundation SoilC.D. Wang, S.H. Zhou and H. Su 1083
Thermal Property Measurement of Polymer MaterialsJ.S. Hsu, B.J. Wen and L.J. Chang 1089
Failure Analysis of Stress Corrosion Crack of 1Cr18Ni9 Stainless Steel Cylinder BodyD.Q. Wei, X. Dong and S.Q. Li 1094
The Effect of Scanning Velocity on AISI 304 Stainless Steel Laser Cladding CoatingsP. Xu, C.X. Lin and D.P. Sun 1098
j Manufacturing Engineering and Automation II
Porous Metal-Fiber Sintered Felt by Multi-Tooth Cutting and Sintering- MorphologicalAnalysis and MechanismsW. Yuan, Y. Tang and X.J. Yang 1102
Fretting Wear Behavior of Burnished Pure Copper under Oil LubricationN. Li, J. Zhao, W. Xia and F.L. Li 1108
Effect of Thermal Treatment on the Physical Properties of Electrospun PVDF MembraneS.C. Cheng, Y.Z. Liang and Y.P. Qiu 1113
Alignment of Carbon Nanotubes in Polystyrene Using Vibration and Electric FieldY. Xu, W. Chen and K.L. Yung 1117
Study on Stress-Strain Model of Metallic Materials with Shot Peening Residual StressT.S. Zhang, J. Hu and J.S. Wu 1121
Effects of Pure Water on the Tribological Properties of Self-Mated TitaniumY.P. Chang, J.H. Horng, H.M. Chou and J.C. Wang 1127
The Effects of Strong Oxidizing Slurry and Processing Atmosphere on Double-Sided CMPof SiC WaferT. Yin, T. Doi, S. Kurokawa, O. Ohnishi, T. Yamazaki, Z.D. Wang and Z. Tan 1131
Laser Induced Forward TransferC.L. Kang, Y. Xu, K.L. Yung and W. Chen 1135
Spectral-Domain Optical Coherence Tomography for Material DetectionY.W. Qin and H. Zhao 1139
The Analysis of Fracture Mechanics on Self-Healing Composite Materials withMicrocapsulesL. Zhang, Y. Tian and Y.M. Ma 1143
Nonlinear Viscoelastic Analysis of Double Base PropellantJ.S. Xu, Y.T. Ju and C.S. Zhou 1147
Chapter 5: Control, Automation and Computer-Aided Systems
Adaptive Control of Magnetic Drive Actuator for Laser CuttingX.Y. Zhang, D.Q. Chu, T. Shinshi, T. Fukuoka and T. Nakai 1155
Magnetic Detector Based on GMI Effect of Amorphous WireS.C. Wei, J.H. Deng, C. Han, Y.Y. Yang and J. Cui 1160
Analysis of Wireless Energy Transfer System Using Magnetic Resonant CouplingW.X. Li and H. Zhang 1164
Receiver Operating Characteristic for Diagnosis of Wine Quality by Bayesian NetworkClassifiersC.C. Wei 1168
Design of a Servo Controller for Modularized Flexible Joint with Integrated Torque SensorsBased on SOPCN.Z. Wei, H.X. Sun, P. Ye, Y.H. Zhang and X. Ji 1174
A Novel Method for Alignment Calibration of IMU and Doppler SensorsW.L. Li and L.Q. Lu 1178
Model-Free High Order Sliding Controller for Underwater Vehicle with Transient ProcessC.N. Deng and T. Ge 1184
RCS Control Study Based on the Model Reference Adaptive ControlF.X. Liu, L.M. Wang and X. Li 1191
Research of PMSM Rotor Absolute Position Detection System Based on AU6802N1G.D. Bai, J.T. Gai and T. Ma 1195
Adaptive Inverse Control of Hydro Electric Unit Based on Wavelet Neural NetworksZ. Liao and B.Y. Ye 1200
PID Control of Main Steam Temperature Used Quantum Particle Swarm OptimizationY.M. Nie, T. Wang and Y.B. An 1204
LMI-Based Robust Control of Norm-Bounded Uncertain Perturbed Discrete Systems withboth State and Input DelaysY. Li 1208
Study on Shift Schedule of Pure Electric Vehicles Automatic TransmissionK. Huang, M.L. Yan, Z. Wang and D.D. Zhu 1212
Liangchi Zhang, Chunliang Zhang, Jeng-Haur Horng and Zichen Chen k
Low-Dimensional Approximation for Control of Spatio-Temporal Processes Using PrincipalInteraction PatternsX.P. Cao, Z.Y. Li and M.X. Liu 1217
Research on Key Technologies of the Cableless Pipeline RobotY.N. Duan, Z.J. Han, G.Z. Li and H. Tian 1221
Passivity-Based Tracking Control Design for Underactuated Mechanical SystemsS.S. Wu and W. Huo 1225
Error Compensation for Single Pair-Pole Encoder Based on Ellipse HypothesisY.F. Zeng and F.F. Jiang 1231
Wireless Remote Control Design of the De-Icing RobotH. Liu, B.H. Jiang, F.B. Liu and Q.S. Xu 1236
Research on Data Acquisition System of Ship Measurement and Control Device CheckEquipmentH.Y. Yu, H.B. Meng, Q. Song and T.Y. Deng 1242
The Design of Variable Frequency and Constant Pressure Water Supply System Based onFuzzy ControlY.L. Wang, Y.B. Hu, P. Wei, Y. Jiang and J. Xie 1247
The Optimization Layout Method of Intelligent Roadside Sensor System in TrafficManagement and ControlD.C. Cui and Y. Yu 1251
Automatic Calibration of the 3D Vector MagnetometerL. Li and Z. He 1256
Design and Optimization of Elastic Diaphragm in Miniature High-Temperature PressureSensorL. Cao 1260
Automatic Alignment of 3D Point Clouds to Orthographic ImagesZ.M. Xiong, G. Wan and X.F. Cao 1265
Propulsion-Force Optimized Control of Linear Induction Motor for Urban TransportationSystem Considering Material Change of Reaction PlateM. Li and Z.P. Yang 1269
A Video Test Sequences Generation Way for Behavior Recognition Based on Cloud ModelM. Li and B. Wu 1276
A Camera Calibration Method Using Quadratic Curve FittingT. Xia, C. Jin, X.Y. Jiang and Y.Z. Li 1281
Agile Turn Control for Air-to-Air Missile Based on Reaction Jet Control SystemY.Y. Ma and S.J. Tang 1285
The Research of Automobile Automatic Stabilizer Bar Control System and Test PlatformH. Zhao, H. Sun, Y.K. Feng and W.X. Zhang 1289
Design and Implementation of Control System in Ultrasonic Detection Machine for PlatePartX.J. Zhang and Y.F. Yue 1295
High-Order Distributed Consensus with One-Bit Adaptive QuantizationW.K. Wang and H.X. Peng 1299
A Design of Intelligent Illumination System Based on LonWorksY. Zhang, P.Q. Yang, X.F. Zheng and Y.H. Tang 1303
Energy-Saving Applying Study of Fuzzy Control in the Variable Frequency and ConstantPressure Water Supply SystemY.B. Hu, Y.L. Wang, L.B. Hu and P. Wei 1307
Power Short-Term Load Forecasting Based on QPSO-SVMX.T. Zhu and B. Xu 1311
Control and Stability Analysis of Multi-Joint Manipulator under Constraints Based onRiemannian GeometryH. Liu, H.F. Sun, G.Y. Ding, T. Zhang and L. Yuan 1315
Study on Improved PCA-SVM Model for Water Demand PredictionX.H. Xue, X.F. Xue and L. Xu 1320
Research on In-Vehicle FlexRay Bus Network NodesZ. Ou and X.P. Xie 1325
l Manufacturing Engineering and Automation II
A New Numerical Control System Based on ARM MicroprocessorJ.Y. Zhang 1330
A New Way of Ultra-Wideband Channel Estimation Based on Bayesian CompressiveSensingF.L. Li, H. Wen and Z.M. Zhuang 1334
Design of the Advanced Automatic Door Controller Based on PLCY. Zhang, P.Q. Yang, F.W. Yuan and Y.R. Hu 1338
The Trouble-Shooting for the Over-Current in AC Inverter of TankerF.Y. Li 1342
Switching Control Methods for Expressway Ramp Metering Based on Hybrid AutomatonModelH.F. Li, X.F. Wang and Q.Y. Ding 1346
Short-Term Electricity Price Forecasting Based on MPSO-BP AlgorithmY. Dong, Q. Yang and W.J. Yan 1351
The AGV Controller System Design Based on CPACT. Xia, C. Jin, Y.Z. Li and X.Y. Jiang 1356
Non-Sinusoidal Injection Control Strategy of Z-Source InverterY. Zhou and X. Ma 1360
USB Flash Disk Recorder Based on STM32G.Y. Ou, X. Pan, Y. Pan and Y. Gao 1367
Bringing Path Planning and Lean Automation TogetherJ. Polden, Z.X. Pan, N. Larkin and S. van Duin 1371
A Modified Binary Quantum-Behaved Particle Swarm Optimization Algorithm with BitCrossover OperatorM.L. Xi and J. Sun 1376
Research on Attitude and Position Tracking Algorithm of Drill Bit for Underwater Mud-PenetratorK. Yang, T. Ge and X.Y. Wang 1381
Walking Motion Generation and Validation of Biped Humanoid RobotB. Tu, D.P. Zhao and X.Q. Tai 1386
Study on 3-D Laser-Scanning-Based Machine Vision System for Robotic ConstructionVehiclesJ.L. Cao, Y. Luo and Z. Li 1391
Photon Counter Implemented by Field Programmable Gate ArrayX. Li, X.G. Qi, Q.H. Li, N. Wang and L.P. Wang 1396
The Simulation of the UAV Collision Avoidance Based on the Artificial Potential FieldMethodJ.Y. Liu, Z.Q. Guo and S.Y. Liu 1400
Design and Research of Energy Saving Control System for Heating NetworkH.X. Sun, C. Gao and X. Yan 1405
Implementation of a Voice Dialing System Based on HTKF.L. Li, X.Y. Ma and Z.M. Zhuang 1410
Analog Circuit Fault Diagnosis Using AdaBoost with SVM-Based Component ClassifiersB.Y. Dong and G. Ren 1414
A Design of Path Planning System for UP6 Industrial Robot Based on Machine VisionS.Q. Xu 1418
FBG Intrusion Recognition Algorithm Based on SVMJ. Wang 1422
Analysis for SCR Control System Based on ANNG.Q. Ruan, Z.D. Zhang and Q. Wang 1428
Pseudo Multi-Hop Distributed Consensus with Adaptive QuantizationW.K. Wang and H.X. Peng 1432
Quadruped Robot Omni-Directional Walking on a Slope Based on Static BalanceW.Y. Zhang and L. Zhang 1436
The Design and Simulation of Voltage and Reactive Power Fuzzy Controller in SubstationH.H. Fang, X.M. Shu, J. Wang and M.Q. Wang 1441
Liangchi Zhang, Chunliang Zhang, Jeng-Haur Horng and Zichen Chen m
Stochastic Admissibility for a Class of Nonlinear Singular Markovian Jump Systems withTime-DelayS.H. Long and S.M. Zhong 1446
Hybrid Neural Network Models of Six-Axis Force SensorS.L. Chen and J.Z. Hong 1450
Mechanical Analysis of the Jumping Motion of a Spherical RobotW. Zhao, H.X. Sun, Q.X. Jia, Y.H. Zhang and T. Yu 1457
Research on Dissolved Oxygen Intelligent Control System in Waste Water TreatmentH.X. Sun, C. Gao and N. Li 1461
Application of Fourier Analysis to the Outline of ObjectJ.P. Hu 1465
A Sensor of Aero-Engine Real-Time Fault Detection System Based on ARM9Y.G. Sun, L. Wang and W.X. Chen 1470
Multi-Sensor Cooperative Tracking Using Distributed Nash Q-LearningJ. Cai, C.Q. Huang and H.F. Guo 1475
Research on Data Processing Method of Three Dimensional Machine Vision SystemJ.L. Cao, Y. Luo and Z. Li 1479
Backstepping Adaptive Fuzzy Control for Permanent Magnet Synchronous Motor ServoSystemsR.H. Du, Y.F. Wu, W. Chen and Q.W. Chen 1483
Study on Multivariable System Based on PID Neural Network ControlH.L. Shu and J.T. Hu 1490
Robust Stabilization of Stochastic Singular Systems with Markovian SwitchingY.C. Ding, H. Zhu, Y.P. Zhang and Y. Zeng 1496
Design of Wireless Temperature Measurement System for High Voltage ElectricalEquipmentX.H. Cao, C. Yang and H. Zhang 1502
Consensus of Singular Multi-Agent Systems with Continuous-Time DynamicsT.Q. Jiang, J.W. He and Y.P. Gao 1506
Study on the Addressing Mode of Assembly Language Instruction Set of 80C51 MCUB.F. Sun 1511
The Steam Generator Water Level System Based on Nonlinear First Order ADRC ControlJ. Li, J.W. Ma and X.J. Liu 1515
Sliding Mode Control of Pendulum-Driven Spherical RobotsT. Yu, H.X. Sun, Q.X. Jia, Y.H. Zhang and W. Zhao 1519
Research on the Wi-Fi Protocol Intelligent Automatic Meter Reading SystemH.S. Huang, C.W. Yu, Z.L. Wang and N. Wang 1523
Data Acquisition Design Based on the STM32T.S. Zhang and Y.M. Li 1527
LADRC Control for the Three-Phase Voltage-Type PWM RectifierJ.F. Zhang, E.L. Yao and J.C. Xing 1531
Design of the Controller for PCMC Forward ConvertersW. Zhang, J.X. Xue and H.B. Jiang 1535
Study on Comprehensive Performance Testing Table and Intelligent Measuring Technologyof Constant Velocity Universal Joint AssemblyL. Shi, X.Q. Qin and X.J. Liu 1539
Dynamic Modeling of Industrial Robot Based on Support Vector Machine RegressionAlgorithmC.H. Huang, X.M. Cai and G.S. Mao 1543
A S-Shape Curve Speed Control Algorithm of Continuous Micro-Lines Interpolation Basedon Adjustable Feed-SpeedZ.Q. Shi and K. Ding 1549
Stabilization Analysis of Switched Affine System Applied to Dc-Dc ConvertersF.Y. Zhang and W. Hu 1553
Pre-Estimating Dynamically the Optimum of Extremum Value Control System with LargeTime Delay Element Based on Correlation IdentificationG.Q. Li, Y.Q. Liu and W.J. Liu 1558
n Manufacturing Engineering and Automation II
Optimal Control of a Nuclear Reactor in Load Follow Based on LQG/LTRH.C. Liu 1563
Wiener Filter Based on the Image to BlurC.D. Chen, S.Q. Zhang and C.X. Chen 1567
Radiation Resistance Experiments of Image Sensor and Acoustic SensorF.W. Yuan, Q. Deng and L.H. Zhao 1571
Pseudo Two-Hop Distributed Consensus Algorithm with Link FailureH.X. Peng and W.K. Wang 1575
Design of Grid Connected Parallel Inverters with Interleaved Phase Shift by Using CANBusJ.W. Chen and H.F. Lin 1579
Design on Parameters of Power Circuit of AC Servo SystemB.Y. Liu 1585
Joint Combat System of Systems Modeling and Effectiveness Analysis Based on ComplexNetworksY.B. Qi, L. Zhong, L. Zhang and J.H. Xu 1589
The Direct Kinematics Solution of the 6-RSPS Simulator Platform with BP NetworksJ.J. Li, Y.D. Wei and X.J. Zhou 1593
Pseudo Two-Hop Distributed Consensus Algorithm under Directed TopologiesH.X. Peng and W.K. Wang 1599
The Analysis of Wire Rope Tension Sensor Elastic Body Based on SolidworksP. Liu, X. Zhang, Y.K. Huang and J.X. Rong 1603
Based on the Point Cloud Data of Columnar Structures to Tilt AnalysisQ.S. Li and T.C. Wang 1607
The Switch Control of Double-Power Supply System Based on Intelligent Static SwitchJ.Y. Qin, C.F. Liu and C.Q. Bi 1612
Flocking Control under Virtual Leader-Follower with Link FailureW.K. Wang and H.X. Peng 1617
Second-Order Consensus Filtering AlgorithmH.X. Peng and W.K. Wang 1621
The Summary of AGV Guidance TechnologyJ. Long and C.L. Zhang 1625
The Research and Design of Liquid Level Control System Based on Computer NerveNetworkL. Zhang, J.H. Wang and H.Y. Zhu 1629
The Drawing Simulation for Configuration of the Articulated Industrial Robot Based onUGP. Liu and W.X. Wang 1633
A Simple Data Acquisition Software for Serial Devices Based on Excel VBA and itsApplication in Rotary KilnsJ. Yao and Q.L. Du 1638
Simulation Research on the Control Performance of CVT Starting-ClutchJ.G. Liu, S.Q. Zheng, J.W. Chen and S.Y. Li 1645
Direct Torque Control of Brushless DC MotorL. Wu, L.Y. Ling and S. Chen 1651
Feedback Linearization Control of Pmssm Based on SvpwmH.H. Wang, X.H. Liu, M.J. Ma and C. Yang 1655
Application of TMS320LF2407A and CAN Bus Technology in Flow Control of InverterC.F. Liu, J.Y. Qin and X. Qin 1659
Based on Single Chip Microcomputer Heating Temperature Automatic Control SystemD.Y. Liu, H. Song and Z.Q. Kong 1664
An Intelligent Bullet Counter Based on UV Electro-Optical TechnologyL.X. Ma and Z. Li 1669
Position Tracking Control for Water Hydraulic Vane ActuatorY. Yang and Z.G. Zeng 1673
The Application of Kano Map in the Design of Relay Logic Control CircuitsQ.H. Zhou 1677
Liangchi Zhang, Chunliang Zhang, Jeng-Haur Horng and Zichen Chen o
Study on Navigation of Wireless Sensor Network Mobile RobotC.R. Zhao and M.M. Zheng 1682
Application of Zero-Vector Control to Three-Phase InverterJ.Y. Chen, T.C. Chen, Y.S. Chen and G.J. Chiou 1687
Design of Human-Simulation Intelligent PID Based on APMP Refiner ControlW. Tang and H. Cheng 1691
The Optimization of Mechanical and Electrical Integration Linear Output TransmissionSystem with Sensor FunctionY.W. Liu, Y.Q. Leng, H.T. Luo and W.J. Zhou 1695
The Application of RAM Analysis in a CNC SystemT.L. Nguyen, Y.Q. Wang and Y.H. Zhao 1701
Test Analysis of a Six-Wheel Hydraulic Active Suspension Control SystemW. Chen, Z. Yao, Q.B. Zhao and T.J. Wang 1710
Research on the Application of the Electro-Hydraulic Digital Valve Control in the LiftingDeviceJ.T. Qu, Z.Y. Wu, X. Wang, Z.H. Duan, Y.H. Liu and X.Y. Gao 1715
Study of the Engineering Vehicles of Automatic Transmission Shift Schedule Based onFuzzy Neural NetworkY.J. Huang, J. Yao, J.H. Han and D. Wu 1720
A Study on Servo System of Radar Tracking Fast TargetsX.P. Zhang, M. Guo and L. Lei 1724
Development of Automatic Tracking Plasma Spray Welding System of Triple EccentricButterfly ValveL. Jiao, Y. Wang, Z.Z. Zhang, Y. Wu and X.L. Wang 1730
Numerical Simulation of Pulsating Flow over Blood Vessel RobotC.Y. Huang and F. Jiang 1734
The Decision-Making for Fault Diagnosis Based on Consistent Approximation SpaceL. Chen, M.Q. Xiao, S. Sheng and Y.T. Ma 1739
The Design of Jet Vane of Thrust Vector Control SystemL.M. Wang and B. Mo 1743
A New Control Method of Active Absorption Wave-MakerH.W. Li, Y.J. Pang and G.C. Zhang 1748
Research on Thermal Tactile Perception of Human Fingertips Using Temperature ControlDeviceG.H. Zhang and J.J. Bai 1753
Application of PDA Industry Data Acquisition System in Analysis of the Reason of StripBlocked in Hot MillS.Y. Hu and H.B. Yu 1758
Toyota Prius Control Strategy Experiment AnalysisY.T. Sun, H.T. Zhang and Y.L. Wang 1762
A Method of Constructing Electric Power Data Warehouse Based on Cloud ComputingD.W. Wang and K. Xiao 1766
Vehicle Active Chassis Integrated Control Based on Multi-Model Intelligent HierarchicalControlS. Zhao and Y.L. Li 1770
A Novel Three-Phase AC/AC Converter Using Six SwitchesT.C. Chen, G.J. Chiou, C.C. Yang and J.Y. Chen 1776
Chapter 6: Navigation Systems, Monitoring and Detection Technology
Process Monitoring and Fault Diagnosis of Penicillin Fermentation Based on ImprovedMICAZ.Y. Jia, P. Wang and X.J. Gao 1783
Design Scheme of Outside Environmental Monitoring System for Coal Mine Mobile RefugeChamberB.H. Zhang, A.N. Zhang, Z.H. Yin, Y.M. Gu and Z.L. Jing 1789
Comparison on Three Filter Methods in Self-Alignment for SINS of the Carrier CraftY.J. Wang, J.S. Xu, R.H. Song, Y. Gao and Y.Z. Di 1793
p Manufacturing Engineering and Automation II
Novel Label-Free Cells Structure Detection Method Study Based on Mie ScatteringPrincipleL. Zhang, Z.Y. Li, H. Zhao, W. Chen, L. Yuan and N.L. Yao 1800
Initial Alignment on Moving Base for GPS/INS Integration with the Effect of TimeAsynchronousY.L. Wu, X.M. Wang and P. Cao 1805
Road Edges Detection of a Novel Travel Aid for Visual Impaired PeopleJ. Ying and S.S. Xu 1810
The Application of Coal Cleaning Detection System Based on Matlab Image ProcessingJ.X. Dong and Q. Mu 1814
A Ship GPS/DR Integrated Navigation SystemY.L. Zhang 1818
Image Edge Detection Based on Multi-Structure Elements and Nonsubsambled ContourletTransformK.X. He, Q. Wang and F. He 1822
Research on Independent Coarse Alignment of Aircraft Carriers SINST. Yuan, J.S. Xu and Y.Z. Di 1827
Study on Investigation of Underground Metal Object with Transient Pulse ElectromagneticMethodJ.J. Lang, Q.G. Jiang and H.W. Cui 1831
WI-FI in Mine Ventilation Monitoring SystemX.H. Cao, C.W. Lu and Y.J. Li 1835
Hydraulic Focusing Stability Detection Method Study Based on Digital Image ProcessingTechnologyL. Xiao, L. Zhang, H. Zhao, W. Chen and L. Yuan 1839
Study on High-Grade CNC Machine Tool Wear Monitoring Methods and ExperimentalSystemM. Huang, X.L. Liu and L. Yan 1844
Development of Signal Conditioning Circuit of a New Strain-Crack Detecting SystemH. Wang, Y.S. Zhang and S.F. Yuan 1849
Study on Multi-Parameter Monitoring Instrument Based on GSM NetworkG.H. Chen and Y.Z. Liu 1854
Research on Substation Transformer Monitoring System with GSM NetworkX.L. Zhu 1858
Application in Deformation Monitoring Signal Based on Wavelet Modular MaximumAlgorithmY.H. He, H.Y. Wen and P.W. Jin 1862
Design and System Realization of Real-Time Monitoring of High Voltage LinesD.G. Hu, H.Q. Zhao and C.W. Luo 1868
Development of Quantitative Analytical Instrument for Colloidal Gold StripsY. Wang, K. Jiang and P. Wang 1872
Chapter 7: Dynamics of Mechanisms and Systems
3D Solid Finite Element Modeling and Rotordynamics of Large Rotating Machines:Application to an Industrial Turbo EngineW.M. Ma and J.J. Wang 1879
The Spectral Leakage Minimization of Spectrum for Motor Fault Analysis Using AdaptiveMulti-Taper MethodJ. Treetrong 1886
Optimal Design of Vehicle Power-Train Mounting System Based on Improved ParticleSwarm OptimizationD.Y. Pan, X. Gao, C.G. Xia and H. Ding 1890
Software Development for Testing and Evaluating Online Dynamic Performance of CNCMachine ToolJ.Q. Wang, Y. He, W.T. Niu and Z.H. Liu 1897
FLUENT/SIMULINK Collaborative Simulation for Missile Separation from CavityT. Han, S.Q. Tang, C.Q. Huang and K.S. Dong 1902
Liangchi Zhang, Chunliang Zhang, Jeng-Haur Horng and Zichen Chen q
A Method for Sheath Flow Forming, Controlling and DetectingZ.Y. Li, L. Zhang, H. Zhao, B. Kong and N.L. Yao 1907
Adaptation of Gershgorin Disk for Motor Fault AnalysisJ. Treetrong 1912
Simulation Study of Vehicle Brake Stability Control on Turning Lane Based on ABST. Yang and D.D. Song 1916
The Relationship between Contact Angle Difference and Equivalent Conicity of High-SpeedEMUZ.B. Zhang, P.B. Wu, R. Luo and F. Gan 1920
The Noise Test System and Solution Measures of Vibration TestS.J. Kong, J.Y. Li, M. Yang and J.C. Chen 1925
Vibration Analysis of a Shell Structure by Finite Element MethodM.H. Zhao 1929
Dynamic Responses of Supercavitating Vehicles under Non-Stationary Random ExcitationX.H. Song, G.P. Zou and W.G. An 1934
Research on Prognostics and Health Management System for Self-Propelled GunX.J. Shao, L.J. Cao, J.H. Liu, Q. Ma, G. Tian and H.B. Hu 1938
Numerical Computation of Acoustic Field Using Boundary Mesh Less MethodH. Hu, X.Y. Wu and L. Ma 1942
Numerical Calculation of Hydrodynamic Interference Coefficients between Hull, Rudderand PropellerX. Wang, M. Wu and R.R. Ying 1949
Dynamic Parameters Estimation Based on Set Inversion and Interval Analysis AlgorithmB.X. Liu 1954
Fault Detection of Electric Motors Application Using ML Estimation MethodJ. Treetrong 1958
Simulation Analysis of Control Strategy for TLT Wheel Coordination Based on ConstantPressure NetworkL.J. Zhao, N. Li and T. Fang 1962
Comparison of Two Two-Equation Turbulence Model Used for the Numerical Simulation ofUnderwater Ammunition Fuze Turbine Flow FieldD.Z. Shen, H. Zhang and H.J. Li 1968
Research on Operation Stability Deterioration Trend Prediction Faced to Wind PowerGroupZ.L. Jiang, X.L. Xu, Y.B. Zuo and Z.J. Zhang 1973
The Effects of Ply Angle of Laminated Composite Plates on Wind Induced VibrationJ.Q. Li and Y. Narita 1978
Application of Support Vector Machine Regression in Failure Analysis of Fan Pump inAmphibious Assault VehiclesM. Lin, J.H. Chen, L.H. Yi and J. Li 1982
Fault Diagnosis of Induction Motor Based on Wavelet Packet Analysis and NegativeSelection AlgorithmG.L. Yuan and S.W. Qin 1986
Research on Similarities between Abnormal Rotor Model and the Prototype Based onDynamic SimilarityA.L. Wang and L.K. Huang 1991
Analysis and Training in Sanda Movement Rotor Inertia Biological MechanicsJ.S. Liu and Y.L. Jing 1996
The Transient Characteristerics Evaluation of Dynamic Environmental Test of SatelliteJ.B. Zhu, S.H. Xiang, Y.Q. Feng and S.C. Fan 2000
Experimental Study on Deck-Temperature-Rising Technology in Different Deck AreaC.W. Xie and W. Chi 2006
Research on Balancing Method for Inertia Force of Slider-Crank Mechanism with SmallLinkage RatioR. Yuan, Y. Sun, W.H. Fan, K. Wu and Z.J. Chen 2011
Analysis and Control of Vibration Generated by High-Speed Spindle SystemZ.P. Wu, B.Z. Li, J.G. Yang and P. Xue 2016
r Manufacturing Engineering and Automation II
Improved EEMD on the Application Research of Signal Trend AnalysisM.J. Zhang, C. Wang, Q. Cao and H. Chen 2020
Studies on Dynamic Parameters of Intellectual Vibratory RollerT. Gong and B.X. Liu 2024
The Finite Element Simulation of Crack Growth of a Wind Turbine BladeC.Z. Chen, Y. Zhang, B. Zhou and S.W. Zhang 2028
Dynamics Response of Rails for Electromagnetic Launcher with Acceleration LoadY.B. Geng 2032
Vibration Analysis of Pumps Units Based on Fuzzy Matter-ElementK.R. Huang, H.Q. Wang, G.X. Lin and Y.H. Tang 2037
Study on Fault Diagnosis of Rotating Machinery Based on Lyapunov Dimension andExponent Energy SpectrumB.C. Wang and Z.H. Ren 2042
Study of Data Fusion Method for Fault Diagnosis Based on FDR Feature SelectionAlgorithm and HMM/SVM ModelS. Li, C.L. Zhang and L.B. Hu 2046
The Effect of Tension for Belt Drive Rotary Motion ErrorC. Wang, Q. Cheng, M.M. Wang, H. Si and J.C. Zhao 2051
The Progress of the Study on Fan Noise Reduction TechnologyX.H. Lin, J. Li, Y.P. Cai and M.H. Ji 2056
The Systematic Thinking of Traffic Accident Vehicle Brake Performance by Road TestVerificationC. Wei, X. Gao and M.X. Nie 2060
Verification of FLUENT in the Computation of Supersonic InletX.Y. Guan 2064
Numerical Analysis on the Pressure Distribution of Long Oblate ChimneyZ.H. Yuan and Z.L. Zhan 2068
Application of EMD to Integrated Signal Trend ExtractionY.Q. Chen, W. Zheng and X.B. Wei 2072
Research on the Equipment-Oriented Faults Diagnosis Expert SystemH.X. Shi, X. Li, X.B. Zhang and Y. Li 2077
Analyses of Error and Precision of 6-DOF PlatformR. Ren, C.C. Ye and G.B. Fan 2081
Analysis of Turbines Vibration and Treatment Measures during the CommissioningG.C. Fang 2087
A Brief Analysis of Vibration on the Printing Area in Ordinary Offset PressM. Yang, J.Y. Li, J. Chen and S.J. Kong 2091
Blasting Demolition Technology and Vibration Monitoring of Two 90m-High CoolingTowers in Complex EnvironmentS.X. Xu and D.Z. Chen 2095
Modal Analysis on Transmission Gear Train of Planetary ReducerJ. Zhou and J.Y. Su 2100
Noise and Vibration Analysis of the Precision Grinder Hydraulic StationX.M. Zheng, H. Xu and J. Hu 2104
Model for Unanticipated Fault Detection by OCPCAZ.M. He, H.Y. Zhou, J.Q. Wang and Y.Y. Jiao 2108
A Systematic Research on Reconstructing the Accident Velocity with Braking TracesC. Wei and M.X. Nie 2114
Fault Diagnosis of Rotating Machineries and its Development TrendH.Y. Zhu, C.L. Zhang and B.J. Yang 2118
An Identification Method of Appearances and Expansion of Fatigue Crack in the WindTurbine Blade Based on Fractal FeatureB. Zhou, C.Z. Chen, Q. Gu and H. Liu 2123
Wavelet Selection in Fault Diagnosis of Wavelet TransformS. Li, F. Lv and C. Fu 2127
Development of Automatic Stimulating Cell System Using Mechanical Vertical ForceC. Ay, C.C. Lien and C.Y. Yeh 2131
Liangchi Zhang, Chunliang Zhang, Jeng-Haur Horng and Zichen Chen s
A Study of Hybrid Optimization of Injection Moulding Process Parameters for Plastic GearN.M. Mehat, S. Kamaruddin and A.R. Othman 2135
Application of Non-Circular Planetary Gear Mechanism in the Gear PumpH. Ding 2139
Study on the Effect of Brush Roller to BlanketC.D. Lv, J.F. Cai, G. Li and R.M. Fang 2143
Electro-Hydraulic Proportional Flow Valve Control Complex Variable Pump and Researchits Property for Injection Machine Hydraulic SystemL. Li, X.F. Zheng and X.B. Xie 2148
The Method on Acceleration Extraction from Strapdown Airborne Scalar GravimeterBased on Flight DynamicsS.K. Cai, K.D. Zhang, M.P. Wu and Y.M. Huang 2152
Inquiry Process of a New Transmission MechanismJ.J. Cao and Y.Q. Wang 2157
Analysis of Bulging Application in the Wind Power Bearing Ring ProductionY. Mei and S.X. Xiao 2161
On the Kinematics and Statics of Planetary Simple Gear ReducersL.C. Hsieh and T.H. Chen 2165
Chapter 8: Engineering Education
The Construction and Practice of Teaching Method for Mechanical Principles IntegrationCourse Based on CDIOQ.Q. Lu, Y.F. Wu and S.L. Sun 2171
Integrated Model of the TRIZ Theory and Research-Oriented TeachingF. Jiang, C.L. Zhang, Z.W. Liang and J.H. Xiang 2175
Group Decision-Making Oriented Civil Engineering Undergraduate Education Reform inChinaC.Y. Huang and X.M. Wang 2180
College Teaching Quality Evaluation Model Based on BP Neural NetworkX.H. Zhu 2186
Thinking of Engineering Graphics Teaching Management Model and Teacher TeamBuildingM.X. Luo 2190
Strengthen Practice Reform of Professional Teaching and Cultivate Students' ProjectPractice AbilityS.L. Sun, Y.F. Wu, Q. Qiu, H. Liu and Q.Q. Lu 2194
The "Nexus" Teaching Method in Mechanical Engineering CoursesY.F. Wu, S.L. Sun and H. Liu 2199
Exploration and Practice of “Six in One” Ability Cultivation System of Independent CollegeStudentsX.R. Li, G.H. Yu, Q.L. Wu and Z.Y. Cui 2203
Exploration on Teaching Reform and Innovation of Material MechanicsJ. Liu 2208
Exploration and Consideration on the Curriculum Construction of Processing Technologyof Paper Box and CartonY.G. Yang, Q.Z. Gao and Q.X. Liu 2212
Teaching Reform of Numerical Control Machine Tools and Programming Based onModern Engineering EducationS. Wang and B.H. Wang 2216
The Internet-Based Electrical Engineering Virtual Lab: Using Load-Balancing ClusterSystemJ.F. Chen, S.H. Zhang and S. Zhu 2220
PCMM Model Analysis and Development Capability Fuzzy Evaluation System Research inTeaching Team of Automobile Specialty in Higher Vocational CollegeS. Yue and C.G. Wang 2224
t Manufacturing Engineering and Automation II
The Research and Practice of Innovative Training Methods on Computer and RelatedMajorsZ. Yi, J. Du and T.L. Liu 2228
Integrating and Sharing of Instructional Resources for Local Colleges Based on CloudComputingC. Liu and Z. Yi 2232
Study on Problems and Strategies of Personnel Training in Modern LogisticsX.B. Zhang, H.X. Shi, T. Wang and Y. Qiu 2236
Reflections on the Training of Outstanding EngineersC. Fu and B. Huang 2240
The Teaching Design for Mechanics-Electronics- Hydraulics Integrated Experiment Basedon Learning PsychologyJ. Chi, J.L. Guo and W.W. Zhang 2243
Conception of Mechanical Engineering Training System by Trinity of Engineering Project,Workplace Environment and Industry-University CooperationS.L. Sun, J. Zhang, Y.F. Wu and W. Shao 2247
Thinking and Suggestions on Engineering Mechanics Teaching Based on “Education andTraining Program of Excellent Engineer”J.L. Duan, Y.H. Lu and Z. Yang 2251
A Study on the Teaching of Basic Specialized Courses Based on the Cultivation of PracticalEngineering CapabilitiesB. Gao, Z.Q. Zhao and W.M. Wang 2254
Extending Mechatronic Innovative and Practical Training Curriculum to SophomoreUndergraduatesX.M. Huang 2258
Research into the Training of College Students’ Abilities to Create, Innovate and PioneerS. Han and X.F. Han 2262
Research and Practice of Steady Enhancement on Innovation Ability of MechanicalEngineering StudentsL. Li, J. Ye and A.H. Chen 2266
The Exploration and Practice of Applied Talents Cultivation Based on "Engineering with aBig E."Y.G. Wei 2270
Quality Evaluation of Specialty Employment for Engineering EducationZ.H. Liu 2274
The Research of Engineering Quality Cultivation Strategy in Engineering EducationT.L. Liu, X.Q. Wu and Z. Yi 2278
The Tao: What Engineering Education Should Concern - Teachings from Tao Te ChingY.J. Guo and W. Wang 2282
The Research and Practice of Three-Dimensional Innovation Talents Development Model inEngineering EducationX.Q. Wu, T.L. Liu and Z. Yi 2286
Using WebQuest Approach in EFL for Project-Based Course DesignH. Cui, Y.P. Tong and J. Bao 2290
Training Mode of Agricultural Engineering Talents Based on IndustryZ. Yang, R.C. Jia, X.W. Luo, T.S. Hong and D.T. Yang 2294
Innovating the Educational Mode of Multi-Level Cooperation, Cultivating PersonalizedMechanical EngineersB.W. Li, F.W. Yuan and L.B. Hu 2298
Research on Training Mode of Higher Engineering EducationW.H. Liu 2302
Construction of Mechatronics Engineering Talents Cultivation System Based on LocalEconomyW.M. Zhao, X.X. Zhu and C.Z. Yang 2306
Research into College Students’ Pioneering EducationS. Han and X.F. Han 2310
Development of the Practice Teaching Project in Machine Design Based on CDIOEngineering Education ModelQ. Guo, D.G. Luo and Y. Long 2314
Liangchi Zhang, Chunliang Zhang, Jeng-Haur Horng and Zichen Chen u
Current Situation of Applied Graduation Design and CountermeasuresC.Z. Yang, W.Y. Shang and X.B. Xu 2320
Study on Solving Ways of the Problems in University Course SyllabusW.W. Zhang and W.Y. Shang 2324
Exploration on Experiment Teaching Reform Based on CDIO Engineering TheoryQ.F. Wu, Z.M. Xiao, H.Y. Zhu and Y. Long 2328
Researches and Practices of “Interchangeability and Technology Measurement” Based onthe Training Pattern of Excellence ProgramX. Yan and W.Y. Shang 2333
Study on China’s Engineering Education ReformT.L. Liu, X.Q. Wu and Z. Yi 2337
The Application of E-Portfolios in Designing Alternative Assessment System for ForeignLanguage EducationH. Cui, Y.P. Tong and Y.M. Hou 2341
Teaching Reform Research of Mechanical Drawing Based on the Theory of CDIOY.D. Hu, A.S. Li, F. Jiang and Y.J. Wang 2345
Strengthen the Training of Metalworking Practice for Promoting Excellent AbilityC.Z. Yang, H.R. Cui and H.Y. Lu 2350
Research on Accreditation System of Higher Engineering EducationW.H. Liu 2354
Innovation on “Machinery and Equipment” Classroom Teaching for the Cultivation ofExcellent EngineersW.Y. Shang, W.W. Zhang and X.F. Wang 2358
Building a New Training Model of Practice Teaching Based on "Plan for Educating andTraining Outstanding Engineers"S.G. Chen, S.Y. Zhong, Z.Z. Sun, Y.Z. Chen and N. Li 2362
Study on Strategy-Based Total Budget Management System of Private Higher LearningInstitution in ChinaJ.J. Du 2367
Implementing Collaborative Innovation Accelerating Multi-Cooperation for VocationalCollegesF. Xiao, Y. Situ and D.W. Li 2371
Research on Design Knowledge Acquisition of Manipulator Based on Adaptive GeneticAlgorithmW.W. Liu and S.Y. Shen 2376
Employment Situation Investigation of Graduates Major in MechanicsX.Y. Jin 2381
Learning Foremost Knowledge of Fluid Mechanics with Multiple RepresentationsY.C. Hsieh 2384
Chapter 9: Related Themes
Experimental Analysis of Polymer Injection Ability under Constant Pressure and SpeedB. Huang, C. Fu, H.B. Liu and H.W. Wang 2391
A Rapid Maneuver Method with High Accuracy for Spacecraft Based on CMG and RWY.G. Yang, F. Wang and Z.W. Sun 2395
Study of the Modeling of Incentive Air Pressure Waves to the Human EarC.J. Chen, X.C. Nie and M. Zhang 2401
Contour Extraction of Inclusion Image with Mumford-Shah ModelG.X. Lin, W.M. Zhou, Y.H. Tang and L.S. Li 2410
Wall Socket Fire AnalysisL.T. Wang and Q.S. Meng 2414
Influencing Factors for NOx Reduction by SCRL.S. Chen, C. Sun and C.X. Tang 2418
The Chloride Ion Penetration Model Coupled with Temperature and Moisture Transfer inMarine EnvironmentJ. Zhao 2422
v Manufacturing Engineering and Automation II
Exponential Asymptotic Stability of a Repairable System with Two Identical ComponentsX. Feng, P. Zuo, H.T. Hua and X.Y. Qi 2428
Analysis of Low-Carbon Economic Benefits of Wind Power Projects in Yunnan ProvinceX.Q. Gao and W.J. He 2432
Discussion about the Efficient Management and Control of Construction Projects′ CostJ.H. Zhang and X.Y. Song 2437
Diagnostic Strategy Optimization Based on Predatory Search AlgorithmJ. Luo, Q.B. Deng and C. Meng 2441
Safe Comprehensive Evaluation of Fully Mechanized Mining Face Based on Fuzzy Matter-ElementW.M. Zhou, G.X. Lin and Y.H. Tang 2445
Relationship Study of Absorption Capacity, Degree of Innovation and InnovativePerformance in Textile and Garment EnterprisesW. Guo, G.N. Sun and W.J. Wang 2450
Semantic Based Intelligent Resource Service Composition TechnologyY.J. Zhao, Y. Yan, G.X. Wang, J. Hao and S. Chen 2456
Research on the Dangerous Quality of Roasting Lighter for Electric HeaterL.T. Wang and C.Z. Zhao 2461
Constitutive Model Based on the Multiplicative Decomposition of Deformation Gradient inArbitrary Orthogonal Coordinate SystemW.C. Sun and S. Lu 2465
Research on Planning of Logistics System in the Material Support Base for EmergencyH.X. Shi, X.B. Zhang, Z.J. Duan and G. Yu 2474
Artificial Bee Colony Algorithm for the Parallel Test Tasks SchedulingL. Chen, M.Q. Xiao, H. Yu and L.L. Zhao 2478
Research on Decision-Making Method for Suppression of Air Defenses of Virtual Target forthe Radar SimulatorC. Zhang, Z.Y. Hua, X.H. Shi and Z.S. Li 2482
Image Conversion from DICOM into Bitmap Based on VC PlatformW.J. Gu, L.N. Fan, S.S. Sun, X.L. Hu and X. Wang 2487
The Improvement of Wavelet Packet for Psychoacoustic ModelJ.L. Zhou and Y. Li 2491
Accurate DOD Measurement Using Ranging Tone of China CE'2S.T. Han, G.S. Tang, L. Chen and M. Wang 2495
Simplification of the Parametric Transformation Equations for Analysis of Plane StressM.L. Du, G.L. Chen and K.Y. Pu 2499
User-Group Requirements Based Approach for the Standardization of PartsD. Liu and X.J. Gu 2504
Using Parameter Joint Model to Predict the Grain Yield of Guangxi ProvinceD.W. Li and M.L. Qiu 2509
Dynamic Behavior on Emergency Landing of Light Aircraft with Occupant RestraintSystemL.Y. Luo, Y.B. He, X. Liu and X.H. Yao 2513
Research on the Selection of Modes of Recycling End-of-Life Appliances Based on AHPW.F. Jiang 2519
Testing Technology of Subsea Christmas TreeB.Y. Chen, M.L. Duan, M. Zeng, S.C. Lu, Z. Liu, T. He and M.J. Li 2523
Study on the Relation of the Furniture Product Form and Modeling ElementsK. Huang, Z.F. Zhang and L.Q. Li 2527
Research of Modular Experimental Production SystemD.M. Cao, D.B. Li and F. Yu 2531
Application of IRP Technology in the Informatization Construction of Vehicle MaintenanceSupportY. Chen, Y. He and Y. Fu 2536
Double-Layer Fuzzy Synthetic Evaluation Model of the Colour Comfort Degree inIndustrial CircumstanceH. Cao, X.H. Wang, F.Y. Mao and C. Feng 2540
Liangchi Zhang, Chunliang Zhang, Jeng-Haur Horng and Zichen Chen w
Study on Correlation between the Starch Content of Potato Tuber and its ViscoelasticCharacteristicsW.B. Guo, C.G. Wang and J.J. Gao 2545
The Error Analysis of Water Cut of Crude OilJ. Xie, Q. Liu, Y. Jiang, Y.L. Wang and H.L. Zhu 2551
The Research of Remaining Oil Distribution in High Water Cut OilfieldC. Fu and B. Huang 2555
The Convergence Rate with Bootstrap for Multidimensional Density Functional KernelEstimationD.W. Li 2559
Digital Watermarking Based on Two-Way Arnold Transform and QR CodeY. Su, P. Han, Z.J. Jia and S.H. Liang 2564
Technical Factors’ Measurement and Simulation in the Equipment’s Stability InvestigationY.Y. Zhao, N. Cheng and T.Y. Xiao 2568
Development Trend of Car Painting TechnologyQ. Guo 2573
The Research of Factors which Effect B2C E-Commerce Trust - Based on the Mechanism ofProcessX.F. Wu, J. Zhou and X. Yuan 2583
Study on the ESC Steady-State Cycle Experiments of SCR System for Reducing NOxEmissionsY. Zeng, L.S. Chen and M.J. Zhang 2587
Application in Testing of Bullet Ballistic Parameters Based on Linear Charge CoupledDeviceT. Li, X.M. Yuan, L. Chen and N. Zhang 2591
Roundness Error Measurement of Shaft Parts Based on Virtual InstrumentF.G. Jiang, B. Zhu, Y.T. Wang and P. Liu 2595
Ontology-Based Semantic Description for Substation DevicesX.Y. Wang and L. Yan 2599
Stochastic Optimal Dispatch Model Considering Security Risk ConstraintX. Zhou, H.M. Yang, J.J. Wu and B.P. Liu 2603
Influence of Magnetic Field on Aqueous NaCl Solutions: A Foundational Research on theDesalination Method Based on the Rotating Electromagnetic EffectH.B. Han, B. Guo and F. Chai 2607
Research on Evaluation of Leather Handle Property Based on PNN Neural NetworkZ. Wang, X. Huang and Y. Huang 2612
Power System Stochastic Economic Dispatch Considering Uncertain Discharge Capacityfrom V2GJ.J. Wu, D.X. Yi, Y. Li, Y.F. Liu and Y.X. Huang 2616
Experimental Improvements of Accident Investigation ReportS.C. Wang 2620
Coupled Shape and Reentry Trajectory Optimization of Entry Vehicle for Lunar ReturnX.Z. Wu, S.J. Tang and J. Guo 2624
Self-Organization System Framework of Enterprise Information System Based on CASH.W. Cao and C.G. Xue 2628
Self-Reduction Quiescent Current Low Power Low Dropout Regulator for SoC ApplicationL.C. Liang and R.M. Sidek 2632
Study on Method of Key Target Tracking Parameter MatchingX.L. Pang and R.X. Jang 2636
A Design of Cascaded Multilevel Inverter Snubber CircuitQ.H. Zhou and Q.F. Liu 2642
Study on Developing Data Depot for the Equipment SupportT. Li, L. Chen, Y.J. Chen and S.D. Zhou 2647
Research on Feature Selection Based on Improved Particle Swarm OptimizationG.Q. Wang, J.B. Jia and X.Y. Li 2651
Three-Dimensional Elastic Solution of a Transversely Isotropic Functionally GradedRectangular PlateG.J. Nie, Z.Y. Feng, J.T. Shi, Y.Y. Lu and Z. Zhong 2655