table of contents - glls · fa-xx-bn-xxa-cxx-m fa-xx-pl-xxa-cxx-f fa-xx-pl-xxa-cxx-m optional...
TRANSCRIPT
www.ledneonflex.comwww.GLLS.com
E347880
Version 1.1
Table of ContentsSpecifications 2-3
Technical Specifications 2-3
Physical Specifications 3
Part Number Naming 4
Packaging 4
Connectors 5-7
Seamless 5
Snap 6-7
Male and Female 7
Mounting Hardware 8-9
Standard 8
Plastic 8
Spring Clip 9
Flexible 9
Testing 10-11
Certifications 10
Fixture Testing 10
Charts 11
For More InformationToll Free: 1 (888) 580-6366
Or Visit www.GLLS.com /contact-us/
www.ledneonflex.comwww.GLLS.com2
Technical SpecificationsLight Dimension 0.45 x 0.83in (11.5x21mm) Output RGB RGBW(27K/30K/40K) LED Light SMD LED Chip SMD LED ChipMax Run Length *1 *2
Single Feed (Dynamic) 65.62ft (20m) 49.21ft (15m) Single Feed (Full Load) 49.21ft (15m) 32.81ft (10m) Double Feed (Dynamic) 131.24ft (40m) 98.43ft (30m) Double Feed (Full Load) 98.43ft (30m) 65.62ft (20m)
Light Surface Square profile 160°Lumen Maintenance 70,000 Hours L70 @ 25°C : 90,000 L50 @ 25°C 50,000 Hours L70 @ 50°C : 70,000 Hours L50 @ 50°CElectricalInput Voltage 24V DC 24V DCPower Consumption 3.66W/ft (12W/m) 4.57W/ft (15W/m) PhysicalLED Count 17 LED/ft 17 LED/ft (56 LEDs/m) (56 LEDs/m) LED Spacing 0.7in (17.8mm) 0.7in (17.8mm) Cutting Unit Length 4.92in (125mm) 4.92in (125mm) (7 LEDs) (7 LEDs) IC Type UCS2903 UCS2904 Thermal Management Free air convectionFixture Connections End, side & bottom lead wiresMinimum Bend Diameter 4.72in (120mm) (Side Bending)Temperature RangesInstallation -40°F to 122°F (-40°C to 50°C)Operating -40°F to 131°F (-04°C to 55°C)Humidity 0-95% non condensingDependabilityWarranty 5 Year Limited WarrantySafetyCertification Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant.IP Rating IP67 with appropriately rated accessories
*1 Max Run Length: Dynamic = when the R, G, B channels are not operating at 100% Full Load = when the R, G, B channels are operating at 100%
*2 Max Run Length: Unless otherwise stated, snap and seamless run lengths are the same.
www.ledneonflex.comwww.GLLS.com3
Technical Specifications
5 Year
5Year
160° D:120mm
Physical Specifications
Light Profile Bending Direction
160° Square
Side Bending
21 m
m0.
83 in
ch
11.5 mm0.45 inch
Lumen CountColor Per Foot Per Meter Red >15.24lm >50lm Green >36.58lm >120lm Blue >7.62lm >25lm R+G+B (white) >59.45lm >195lm 2700K >36.58lm >120lm 4000K >36.58lm >120lm
Available ColorsColor CCT WavelengthRed 618-624nmGreen 522-528nmBlue 468-474nmR+G+B N/A2700K 2725 ± 145K4000K 3985 ± 275K
*Color Jackets: For standard or custom color jacket options, contact your Account Manager. Min. order quantity of 656ft (200m).
IP67
Minimum Bending Diameter
4.72 inchΦ 120 mm
Light Emitting Surface
Light Emitting Surface
www.ledneonflex.comwww.GLLS.com4
Part Number Naming Convention
SF-11B-1-01-3W-E-XXX-24DCLED Color (3 digits)
For full part number naming rules, please refer to the document on www.glls.com/support/documentation/
Lead ConnectorFA-11B-1-01-3W-XX-X-XX-XXX-S
Length (3 digits)Exit Type (2 Digits)For Fixture End (1 Digit)Connector Type (2 Digits)
Fixtures
Packaging
Fixture Length White Box Dimensions Packing Box Dimensions # Of White Boxes Package Weight
196.85in (5m) 13.78x1.65x18.11in (35x4.2x46cm) 18.9x14.57x9.54in (48x37x24cm) 5 22.05lbs (10kg)
393.7in (10m) 20.08x1.65x22.05in (45x4.2x56cm) 22.83x18.5x9.45in (58x47x24cm) 5 39.68lbs (18kg)
787.4in (20m) 26.77x1.65x28.34in (61x4.2x72cm) 29.13x25x4.13in (74x63.5x10.5cm) 2 33.07lbs (15kg)
White Box Packing Box
Connectors
www.ledneonflex.comwww.GLLS.com
Seamless Connectors
5
IP67: Rated for wet locations, not submersion. Factory Assembly only.
21.5
mm
2mm11.5mm
21.m
m5
11mm 5mm
21.5
mm
12mm
11.5mm
11.5mm 2mm
14mm
12mm13.5mm
11mm
2m5.
1m
14mm
2mm
11.5mm
12mm
34.
5mm 23.
5mm
11m
m
Seamless Bottom ExitFA-11B-1-01-3W-SE-0-BO-XXX-S
Seamless Side ExitFA-11B-1-01-3W-SE-1-SR-XXX-SFA-11B-1-01-3W-SE-2-SL-XXX-S
Seamless End ExitFA-11B-1-01-3W-SE-0-EN-XXX-S
Seamless End CapFA-11B-1-01-0W-SE-1-EC-000-P FA-11B-1-01-0W-SE-2-EC-000-P
Seamless JumperFA-11B-1-01-3W-SE-0-EJ-XXX-S
21.5
mm
21.5
mm
Connectors
www.ledneonflex.comwww.GLLS.com6
Snap Connectors
IP67: Rated for outdoor use. Factory Assembly or DIY.
27.5mm
46.5mm
19.5 mm
19.5mm
28mm
19.5mm
27.5mm
57mm
28mm
19.5mm
27.5mm
57mm
19.5mm
27.5mm
46.5mm
19.5mm
50.5m m
Snap End ExitNA-11B-1-01-3W-SC-1-EN-XXX-SNA-11B-1-01-3W-SC-2-EN-XXX-S
Snap Side ExitNA-11B-1-01-1-3W-SC-1-SL-XXX-SNA-11B-1-01-1-3W-SC-2-SL-XXX-SNA-11B-1-01-1-3W-SC-1-SR-XXX-SNA-11B-1-01-1-3W-SC-2-SR-XXX-S
Snap Bottom ExitNA-11B-1-01-3W-SC-1-BO-XXX-SNA-11B-1-01-3W-SC-2-BO-XXX-S
Snap End CapNA-11B-1-01-0W-SC-1-ECNA-11B-1-01-0W-SC-2-EC
Connectors
www.ledneonflex.comwww.GLLS.com7
IP20: Rated for indoor use only. Factory Assembly only.
Snap Connectors
50mm
L2
L1
L
Snap JumperNA-11B-1-01-3W-SC-0-EJ-XXX-S
Snap Power T FeedNA-11B-1-01-3W-SC-0-TF-XXX-S
Anvil CutterOptional accessory for on-site cutting.
*Factory order only*
12m m
30m m
Male and FemaleFA-XX-BC-DC-CXX-FFA-XX-BC-DC-CXX-M
FA-XX-BN-XXA-CXX-FFA-XX-BN-XXA-CXX-M
FA-XX-PL-XXA-CXX-FFA-XX-PL-XXA-CXX-M
Optional Accessory:
Anti-Wicking Ferrule
The anti-wicking ferrule is located 115mm (±5mm tolerance) from the connector cable.
For protection against water ingress inside of cable wire hence damage the light.
Mounting Hardware
www.ledneonflex.comwww.GLLS.com8
Standard Anodized Aluminum Channel
Plastic Channel
W x H Standard Length Part Number L1 L2 Screw Hole Φ Hole #
0.54 x 0.87in 1.38in (35mm) CL-11-R-AL-3C5-SD 0.69in (17.5mm) / Φ0.14in (3.5mm) 1
(13.8 x 22mm) 19.69in (500mm) CH-11-R-AL-0M5-SD 1.97in (50mm) 7.87in (200mm) Φ0.14in (3.5mm) 3
39.37in (1000mm) CH-11-R-AL-01M-SD 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 5
78.74in (2000mm) CH-11-R-AL-02M-SD 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 10
W x H Standard Length Part Number L1 L2 Screw Hole Φ Hole #
0.55 x 0.94in 19.69in (500mm) CH-11-R-PL-0M5-SD 1.97in (50mm) 7.87in (200mm) Φ0.14in (3.5mm) 3
(14 x 24mm) 39.37in (1000mm) CH-11-R-PL-01M-SD 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 5
78.74in (2000mm) CH-11-R-PL-02M-SD 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 10
L1 L2
13.8mm
22m
m
Mounting Hardware
www.ledneonflex.comwww.GLLS.com9
Spring Clip Anodized Aluminum Channel
W x H Standard Length Part Number L1 L2 L3 L4 Screw Hole Φ Hole # Clip #
0.64 x 1.01in 1.38in (35mm) CL-11-R-AL-3C5-SP 0.69in (17.5mm) / 0.2in (5mm) 0.98in (25mm) Φ0.14in (3.5mm) 2 1
(16.2 x 25.6mm) 19.69in (500mm) CH-11-R-AL-0M5-SP 0.98in (25mm) 8.86in (225mm) 1.97in (50mm) 7.87in (200mm) Φ0.14in (3.5mm) 3 3
39.37in (1000mm) CH-11-R-AL-01M-SP 0.98in (25mm) 9.35in (237.5mm) 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 5 5
78.74in (2000mm) CH-11-R-AL-02M-SP 0.98in (25mm) 9.6in (243.8mm) 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 10 9
25.6
mm
3.5 3.5
L2
L
L4
L1
L3
16.2mm
Stainless Steel Flexible Channel
W x H Standard Length Part Number
0.52 x 0.97in 3.94in (100mm) CH-11-F-SS-0M1-SD
(13.2 x 24.5mm) 11.81in (300mm) CH-11-F-SS-0M3-SD
19.69in (500mm) CH-11-F-SS-0M5-SD
35.43in (900mm) CH-11-F-SS-0M9-SD
10.7mm
0.4mm
13.2mm
24.5
mm
4.76mm
4.76mm
This profile can be mounted using screws in any gaps where the channel bends.
www.ledneonflex.comwww.GLLS.com10
TestingCertifications Testing Organization Certificate Serial N° Report Reference
UL 2108 UL 20160726-E360029 E360029-2013
CE-EMC SGS SZEM1702001259LMV SZEM160600421302
Fixture TestingOptical Testing Spectrum Analysis IES LM 79 (Lumen, CCT, CRI, XY, SDCM, wavelength)
Photometric Distribution IES LM 73 (Lumen intensity distribution & Lux diagram)
Lumen Maintenance & Lifetime IES LM 84 & IES TM28
Temperature Testing Normal Temperature Test UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21
Abnormal Operation Test UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21
Durability Testing Bending Test Manufacturer-defined, 500 cycles
Swing Test UL2388, >750 cycles
Tensile Test Manufacturer-defined, > the weight of light in max. connection length double feed Twist Test Max connection length double feed Manufacturer-defined, >200 cycles
Ball Impact UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21
IK07 IK08 IEC62262
Environmental Testing Chlorinated Water Immersion BG9667, PH6.8-7.6, free chlorine 0.3-0.6mg/L
Salt Water Immersion IEC60598-1, Sailinity 4%
Salt Spray Test IEC68-2-11
Outdoor Exposure Manufacturer-defined
Flame Resistance UL94
UV Exposure ASTMG 154, ISO 4892-3, UVA @ 340nm
IPX5, IPX6, IPX7, IPX8 IEC60529
Temperature Shock Manufacturer-defined, -40°C - 60°C (typical temperature range)
Constant Temperature Manufacturer-defined, 70°C (typical temperature)
www.ledneonflex.comwww.GLLS.com11
TestingCharts
380nm450nm
470nm
480nm
490nm
500nm
510nm
520nm530nm
540nm
550nm
570nm
560nm
580nm
590nm
600nm
620nm650nm770nm
Red
Green
Blue
Wavelength of Color Light
(X ,Y) Chromaticity Diagram
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.520.26 x
y2700 K
3000 K3500 K
4000 K4500 K
5000 K
5700 K6500 K
2500 K 2200 K