table of contents - omega products international · omega products is the responsibility of the...
TRANSCRIPT
DIA
MO
ND
WALL SY
STEM
PRODUCTS INTERNATIONAL
Diamond Wall System Typical Details
DWS 01 APPLICATION OVER OPEN FRAMING
DWS 02 TYPICAL TERMINATION AT FOUNDATION
DWS 03 TYPICAL TERMINATION AT DECK
DWS 04 HORIZONTAL \ VERTICAL TYPICAL CONTROL JOINT
DWS 05 TYPICAL EXPANSION JOINTS
DWS 06 TYPICAL CORNER DETAILS
DWS 07 FLASHING MEMBRANE AND WRB APPLICATIONS SEQUENCE
DWS 08 FLASHING MEMBRANE AND WRB APPLICATIONS SEQUENCE
DWS 09 TYPICAL TERMINATION AT WINDOW HEAD AND SILL
DWS 10 TYPICAL PARAPET WITH METAL CAP
DWS 11 TYPICAL PARAPET
DWS 12 ROOF/WALL KICK-OUT FLASHING DETAIL
DWS 13 TYPICAL FOAM PLANT-ONS
DWS 14 SOFFIT AND EVE TERMINATIONS
Table of Contents
The Professional’s Choice1681 California Avenue • Corona, CA 92881 • P 800.600.6634 • F 951.520.2594
ww
w.o
me
ga
-p
ro
du
ct
s.c
om
3"=1'-0" DWS 01.00
APPLICATION OVER
APPROVED SHEATHING
DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
SL.
FRAMING
INSULATION WHERE
OCCURS
APPROVED WEATHER RESISTIVE
BARRIER
OMEGA DIAMOND WALL BASE COAT
(3/8" MIN)
OMEGA FINISH
FOUNDATION SYSTEM
1. 4" MIN. ABOVE GRADE, 2" MIN. ABOVE PAVED
SURFACES/HARDSCAPE, OR AS SPECIFIED BY LOCAL
CODE
NOTES
APPROVED WEEP ACCESSORY
SEE NOTE #1
2" MIN.
APPROVED METAL LATH
APPROVED SHEATHING
TYPICAL TERMINATION
AT FOUNDATION
3"=1'-0" DWS 02.00 DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
APPROVED SHEATHING
APPROVED WEATHER
RESISTIVE BARRIER
OMEGA FINISH
WOOD DECK FRAMING
WOOD SUPPORT STRIP
WOOD DECK BOARDS
APPROVED SEALANT
FLASHING NO. 3, EXTEND
BEHIND WEEP ACCESSORY
3" MIN.
FLASHING NO. 2, EXTEND
BEHIND FLASHING NO. 3, 3" MIN.
FLASHING NO. 1, EXTEND
BEHIND FLASHING NO. 2, 3" MIN.
OMEGA DIAMOND WALL BASE
COAT (3/8" MIN)
2" MIN.
212" MIN.
1" MIN.
APPROVED WEEP ACCESSORY
APPROVED METAL LATH
3"=1'-0"
TYPICAL TERMINATION AT DECK
DWS 03.00 DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
FRAMING
APPROVED SHEATHING
APPROVED WEATHER
RESISTIVE BARRIER
APPROVED CONTROL
JOINT ACCESSORY
APPROVED METAL LATH
OMEGA DIAMOND WALL
BASE COAT 38" MIN.
OMEGA FINISH
1. RESTRICT USE OF THIS DETAIL TO AREA WHERE MINIMAL
MOVEMENT IS ANTICIPATED
2. IF MOVEMENT IS ANTICIPATED REFER TO OMEGA DWIS 05.00.
3. AESTHETIC JOINTS MAY BE INSTALLED OVER METAL LATH AND
WIRE TIED.
NOTES
INSULATION WHERE OCCURS
3"=1'-0"
HORIZONTAL \ VERTICAL
TYPICAL CONTROL JOINT
DWS 04.00 DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
INSULATION WHERE OCCURS
APPROVED SHEATHING
APPROVED WEATHER
RESISTIVE BARRIER
APPROVED EXPANSION
JOINT ACCESSORY
OMEGA DIAMOND WALL
BASE COAT 38" MIN.
OMEGA FINISH
APPROVED METAL LATH
FRAMING
EXPANSION JOINT AT FLOORLINE
1. AN OPTIONAL FLASHING MEMBRANE MAY BE USED BEHIND
THE EXPANSION JOINT.
NOTES
APPROVED BACKER
ROD AND SEALANT
APPROVED CASINGBEAD
VERTICAL EXPANSION JOINT WITH APPROVED
EXPANSION JOINT ACCESSORY
VERTICAL EXPANSION JOINT WITH
BACKER ROD AND SEALANT
3"=1'-0" DWS 05.00
TYPICAL EXPANSION JOINTS
DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
FRAMING
APPROVED SHEATHING
OMEGA DIAMOND WALL
BASE COAT 38" MIN.
APPROVED METAL LATH
BULLNOSE CORNER AID
OMEGA FINISH
CORNER AID
APPROVED WEATHER
RESISTIVE BARRIER
3"=1'-0"
TYPICAL CORNER DETAILS
DWS 06.00 DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
9"
MIN
.
9" MIN.
1'-
0"
MIN
.1
'-0
"M
AX.
9"
MIN
.
3"=1'-0"
FLASHING MEMBRANE AND WEATHER
RESISTIVE BARRIER APPLICATIONS
SEQUENCEDWS 07.00 DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
1 /12"=1'-0"
FLASHING MEMBRANE AND WEATHER
RESISTIVE BARRIER APPLICATIONS
SEQUENCEDWS 08.00 DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
FRAMING
INSULATION WHERE OCCURS
APPROVED WEATHER
RESISTIVE BARRIER
OMEGA FINISH
OMEGA DIAMOND WALL
BASE COAT 38" MIN.
WINDOW
APPROVED SHEATHING
APPROVED METAL LATH
APPROVED SEALANT
AND CLOSED
CELL BACKER ROD
OPTIONAL BACKER ROD AND SEALANT DETAIL
APPROVED CASING
ACCESSORY
MEMBRANE FLASHING
TYPICAL TERMINATION AT
WINDOW HEAD AND SILL
3"=1'-0"
TYPICAL TERMINATION AT
WINDOW HEAD AND SILL
3"=1'-0" DWS 09.00
TYPICAL TERMINATION AT
WINDOW HEAD AND SILL
3"=1'-0" DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
APPROVED SHEATHING
FRAMING
APPROVED WEATHER
RESISTIVE BARRIER
OMEGA FINISH
OMEGA DIAMOND WALL
BASE COAT 38" MIN.
METAL CAP
APPROVED SEALANT
1:12
2 12"
MIN.
APPROVED METAL LATH
ROOF FLASHING
1:12
TYPICAL PARAPET
WITH METAL CAP
3"=1'-0" DWS 10.00 DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
FRAMING
APPROVED SHEATHING
FLASHING MEMBRANE
OMEGA FINISH
APPROVED WEATHER
RESISTIVE BARRIER
APPROVED METAL
LATH
OMEGA DIAMOND WALL
BASE COAT 38" MIN.
APPROVED CASING
ACCESSORY
ROOFING MATERIAL ROLLED UP
BEHIND FLASHING
FOAM OR PLASTER CAP
TYPICAL PARAPET
3"=1'-0" DWS 11.00
TYPICAL PARAPET
3"=1'-0" DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
ROOF/WALL KICK-OUT FLASHING
DETAIL
3"=1'-0" DWS 12.00 DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
OMEGA FINISH
OMEGA DIAMOND WALL
BASE COAT 38" MIN.
LATH
APPROVED SHEATHING
WEATHER BARRIER
FOAM PLANT-ON
ADHESIVELY ATTACHED FOAM PLANT-ON
WITH MESH EMBEDDED IN APPROVED BASE
COAT AND OVERLAPPING DIAMOND WALL
(212" MIN.)
FRAMING
FASTENER
LATH
TYPICAL FOAM PLANT-ONS
3"=1'-0" DWS 13.00 DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.
VENT ACCESSORY
EVE TERMINATION
SOFFIT TERMINATION
FRAMING
APPROVED SHEATHING
OMEGA FINISH
APPROVED WEATHER
RESISTIVE BARRIER
APPROVED METAL
LATH
OMEGA DIAMOND WALL
BASE COAT 38" MIN.
INSULATION WHERE
OCCURS
3"=1'-0" DWS 14.00
SOFFIT AND EVE TERMINATIONS
DRAWN: JUNE 2011DRAWING NO.:
CORPORATE OFFICE
1681 CALIFORNIA AVE., CORONA, CA 92881
E-MAIL: [email protected]
WEBSITE: WWW.OMEGA-PRODUCTS.COMSCALE:
THE ARCHITECTURE, ENGINEERING, AND DESIGN OF THE PROJECT USING
OMEGA PRODUCTS IS THE RESPONSIBILITY OF THE PROJECT'S DESIGN
PROFESSIONAL. ALL SYSTEMS MUST COMPLY WITH LOCAL BUILDING
CODES AND STANDARDS. THIS DETAIL IS FOR GENERAL INFORMATION
AND GUIDANCE ONLY, AND OMEGA INC. SPECIFICALLY DISCLAIMS ANY
LIABILITY FOR THE USE OF THIS DETAIL AND FOR THE ARCHITECTURE,
DESIGN, ENGINEERING, OR WORKMANSHIP OF ANY PROJECT. THE
PROJECT DESIGN PROFESSIONAL DETERMINES, IN ITS SOLE DISCRETION,
WHETHER THIS DETAIL OR A FUNCTIONALLY EQUIVALENT ALTERNATIVE
IS BEST SUITED FOR THE THE PROJECT. USE OF A FUNCTIONALLY
EQUIVALENT DETAIL DOES NOT VIOLATE OMEGA'S WARRANTY. THIS
DETAIL IS SUBJECT TO CHANGE WITHOUT NOTICE. CONTACT OMEGA TO
INSURE YOU HAVE THE MOST RECENT VERSION.