table of contents - · pdf fileextreme pressure property of rare metal ... enhanced light...
TRANSCRIPT
Table of Contents
Preface and Conference Organization
Chapter 1: Metals and Its Alloys
Effect of Fluoride Conversion Coating on Corrosion of Behavior of Mg-Ca-Zn AlloyS. Ghaedi Faramoushjani, F. Chinaei, H.R. Bakhsheshi-Rad and M. Hasbullah Idris 3
Effects of Electrolyte Plasma Carbonitriding on Tribological Properties of High Speed SteelS. Mazhyn, R. Bauyrzhan and M. Sсheffler 7
Modification of Stainless Steels Surface Layers by Nitriding and CarbonitridingМ. Skakov, S. Kurbanbekov, M. Scheffler and A. Naltaev 12
Heat Treatments of W6Mo5Cr4V2Si High Speed SteelY. Li, L.Y. Niu, J.X. Lin, Z.M. Shi, G.L. Gao and Y.T. Liu 17
Temperature Prediction Model for Molten Steel in RH Refining ProcessT. Xia and Z. He 22
Technique Equipment Parameters Design of Titanium & Titanium Alloys Oxidizing forLarge Area and Batch-Type ProductionH.N. Yu 26
Study on Mechanical Properties of High Aluminum Zinc-Based Alloys with Different AlContents Ranging from 30 wt% to 50 wt%Y.T. Li, W.H. Shi, B. Sui, J. Li and J.M. Zeng 30
Modeling of Non-Isothermal Austenite Formation in Cr5 Roller SteelF. Zhang 34
Asymmetric Cyclic Deformation Behaviors of Hot-Rolled AZ91 Magnesium Alloy in RollingDirectionX.M. Chen, Y.C. Lin, Z.H. Liu and J. Chen 38
The Study of Ferrosilicon Alloy Sediment Horizon Metallographic EtchantJ.L. Liang, X.Y. Geng and Y.G. Li 42
Study on Preparation of Ferrosilicon Alloy Deposition In Situ Melting Salt ProductionPowerJ.L. Liang, H. Li and X.Y. Geng 46
Electro-Deposition Methods Influence to Ferrosilicon OrganizationJ.L. Liang, H. Li and Y.G. Li 50
The Phase Transformation and Magnetic Properties in Ni-Mn-In AlloysH.L. Yan, Z.B. Li, C.Y. Zhang, Y.D. Zhang, C. Esling, X. Zhao and L. Zuo 54
Deformation Heating and Its Effect on the Processing Maps of Ti-15-3 Titanium AlloyJ.Q. Zhang, H.S. Di and X.Y. Wang 58
Study of Precipitation in the Heavy Plate of VN Micro-Alloyed HSLA SteelN. Li, L.X. Li, C.F. Wang and Z. Wang 65
Extreme Pressure Property of Rare Metal ZirconiumH.L. Yu and Y.W. Wang 70
Friction and Wear Behavior of 45# Steel with Different Plant AbrasiveC.J. Yang, X.P. Huang, J.F. Wu and F.X. Wan 74
Effect of Single Pass Hot Rolling on Goss Texture Development in Twin-Roll Cast SiliconSteel StripC. Sun, Y.H. Sha, F. Zhang and L. Zuo 78
Test Study on Fatigue Property for Forging and Casting Steels of Grade EX.P. Zhang, C.C. Zhang and H.N. Xing 82
Experimental Research on Hot Working Property of Monel K-500 AlloyX.P. Zhang and W.Z. Chen 87
Study on Microstructure and Mechanical Properties of 35CrMnSiMo Cast SteelH.B. Li, H.C. Cheng, J. Wang, X.J. Su and C.J. Li 94
Development of Wear Resistant Cast Steel and Its Study on Mechanical PropertiesH.B. Li, J. Wang, H.C. Cheng, C.J. Li and X.J. Su 98
Chapter 2: Composites and Polymers
Preparation and Tribological Performace of Microcapsules of Butyl Stearate andMelamine-Formaldehyde ResinY.S. Huang, J.J. Guan, G.W. Ma, Z.Y. Li and X.F. Xu 105
Preparation and Characterization of Nanocrystalline Cellulose/Natural Rubber (NCC/Nr)CompositesT.M. Gao, M.F. Huang, R.H. Xie and H.L. Chen 111
Effect of Surface Oxidation at 1500 °C on Flexural Strength and Thermal Shock Resistanceof the ZrB2-SiC-ZrC CeramicM. Wang, Z. Wang, S.C. Li, J. Zhang and B.S. Zhang 115
Product Distribution and Sulfur Migration in Rubber PyrolysisL. Guo, D.M. He, J. Guan and Q.M. Zhang 119
Synthesis and Characterization of Ethyl Cellulose Based AcrylateJ. Yu, C.P. Wang, J.F. Wang and F.X. Chu 124
Self-Recovery and Re-Degradation Phenomena for PZT CeramicM. Luo, D.Y. Zheng and F. Huang 131
Properties of Water-Soluble Core-Materials Applied for LRTMG.D. Xu, Y.F. Zhang, Y.Q. Liu and G.Z. Zhao 135
Preparation and Characterization of Novel Naturally Renewable Resin Acid BasedMonomerJ. Yu, Y.P. Liu, C.P. Wang, Y. Chen, J.F. Wang and F.X. Chu 139
Study on the Nanocomposite Foam of Cardanol Phenolic Resin and Organo-ModifiedMontmorilloniteM. Niu and G.J. Wang 147
Research on Bandwidth of 1-3-2 Piezoelectric Composite with Multi-ModeJ.J. Zhou, L.K. Wang, L. Qin, C. Zhong and C.Y. Chen 156
Seed Adsorption Synthesis and Characterization of PMMA/PAN Particles with Core-ShellStructureW. Chian, Y. Li, H. Yang and X. Wang 163
Polythiophene-Coated Polystyrene Core-Shell Nanoparticles with a Rod-ShapedPolythiophene ShellH.Y. Li and T. Xiao 169
Study on Electrical Properties of Activated Carbon Black Filled Polypropylene CompositesUsing Impedance AnalyzerN.X. Ding, L.L. Wang, P.Y. Zuo, Y. Li and G.Y. Liu 175
Effect of Carbon Black Surface Treatment on the AC Electrical Properties of PP-BasedCompositesN.X. Ding, L.L. Wang, P.Y. Zuo, Y. Li and G.Y. Liu 182
Synthesis and Rheological Properties of Poly (AM-TBAM-NMMAD) Random-BlockCopolymerY.Q. Wu, X.F. Shi, F. Zhao and N.Y. Ying 190
Effect on Flame Retardancy and Mechanical Properties of PA6 Nanocomposites withAddition of OMMT and PFRD.M. Bao, J.P. Liu and X.Y. Hao 195
Calculation of Internal Stresses of Continuous Fiber Reinforced Composite Materials inLongitudinal LoadsY.R. Li, H.B. Jiang and Z.Q. Cheng 199
Study on Preparation and Properties of Ramie Fiber Reinforced CompositesH. Li, Y.F. Zhang, Y.Q. Liu, G.Z. Zhao and R.K. Du 203
Thermo Physical Properties of Copper/Diamond Composites Fabricated by Spark PlasmaSinteringA.R. Niazi, S.K. Li, Y.C. Wang, Z.Y. Hu and U. Zahid 208
Chapter 3: Micro/Nano Materials
b Advances in Manufacturing Science and Engineering
Study on Attenuation Characteristic of Carbon Nanomaterials Smoke to LaserH.X. Wang, Z.B. Song and D.Z. Liu 215
Analysis for Extinction Capability of Carbon Nanofibers by Moment MethodH.X. Wang, Q.H. Zhang and H.H. Sun 220
Solid State Chemical Reaction Synthesis and Characterization of Nanocrystalline Cerium 8-QuinolinolateD.H. Li, S.F. He and J. Chen 224
Synthesis and Micro-Wave Absorption Properties of BiFeO3 Coated Fe NanocapsulesG.M. Shi, D.W. Lu and Y. Zhang 229
Synthesis of CoPt Nanoparticles by Reduction of Co(CH3COO)2 and Pt(acac)2H.P. Shao, Z. Wang, T. Lin and S. Sun 233
Preparation of Monodisperse Iron Nanoparticles at Low TemperatureT. Lin, S.Y. Lv, H.P. Shao and S. Sun 237
Hydrothermal Synthesis, Characterization and Optical Properties of Zn-Doped CdSDendritic NanostructuresH. Feng, J.H. Duan and Z.Y. Xu 241
Energy Transfer of PVK/ SiO2 Nanometer Composite FilmsN. Cui, X.T. Han, X.L. Chen, K. Pan and L.M. An 246
Chapter 4: Functional Materials
Research on the Activation System of Lead-Acid BatteryW.S. Wen and L. Wang 253
Preparation of La0.75Sr0.25Cr0.5Mn0.5O3-δ Nanometer Powders by Sol-Gel Method andResearch about its Electrochemical PerformanceY.L. Wu, Q.H. Wang, L. Wang and H.Y. Zhao 257
Ferroelectric and Ferromagnetic Properties and Magnetoelectric Coupling Effect of theBa0.8Sr0.2TiO3/CoFe2O4 Heterostructure Film by Radio-Frequency Magnetron SputteringY.A. Wang, Y.B. Wang, W. Rao, J.X. Gao, W.L. Zhou and J. Yu 262
Effect of Temperature and Applied Bias on Deflection of PZT Actuators with DifferentMetal SlidesD.Y. Zheng, F. Huang, M. Luo and T. Zhu 267
Synthesis and Characterization of a New Amino-Functionalized PMO MaterialF. Ding and S.X. Liu 271
Synthesis of Sodium Tungsten Bronze via Hydrothermal Method Assisted by Citric AcidJ.Y. Luo, J.X. Liu, F. Shi, Q. Xu, Y.Y. Jiang, G.S. Liu and Z.Q. Hu 280
Effects of Annealing in Different Atmosphere on the Near-Infrared Shielding Properties ofCsxWO3 ParticlesQ. Xu, J.X. Liu, F. Shi, J.Y. Luo, Y.Y. Jiang and G.S. Liu 284
Theoretical Study on Ni2XIn (X=Mn, Fe and Co) Magnetic Shape Memory Alloys by AbInitio CalculationsJ. Bai, J.L. Gu, W.Q. Liu, X. Wang, Y.M. Wang and X. Zhao 288
In Situ Testing and X Rays Radiation Effects of Pt/Bi3.15Nd0.85Ti3O12/Pt FerroelectricCapacitorsL. Li 293
Study on Preparation of OctyltrimethoxysilaneX.C. Wang, J. Li, J. Bing and G.Y. Chen 298
Characteristics of 2D Cylindrical Photonic Crystals Band Gap with Square LatticeZ.X. Wu, W.C. Li, E.D. Gu and L.F. Wang 302
Chapter 5: Energy Materials
Numerical Simulation of Nc-Silicon PIN Solar Cells with AMPS-1DM.K. Xu 309
4-xKXTi5O12 (x=0.02, 0.04, 0.06) as Anode Materials for Lithium Ion BatteryG. Fang 313
Advanced Materials Research Vols. 712-715 c
GC/MS Analysis of Products from Catalytic Hydroconversion of Dagang Vacuum Residuewith Y ZeoliteA.M. Li, L. Han, Z.M. Zong and X.Y. Wei 317
The Effect of Boric Acid Addition on the Performance of a Gelled ElectrolyteD.L. Lu, D.J. Zhang, C.Y. Duan and T. Lin 321
Thermodynamic Behavior of SiH2Cl2 in Polysilicon Production by Siemens ProcessD.M. Song, Y.Q. Hou, G. Xie and Z.H. Ma 325
Electrophoretic Deposition of TiO2 Films on Metal Mesh for Dye-Sensitized Solar CellsD.L. Cheng, Y.C. Hsu, K.S. Kao, H.J. Su, C.H. Liang and C.M. Wang 329
Aluminum Hydride Polymorphs: Preparation, Characterization and Thermal PropertiesB. Xu and J.P. Liu 333
Effect of Heat Treatment Technology on Property of Sodium-Sulfur Battery CathodeCarbon FeltY.Z. Liu, B. Zhu, Y. Chen, W.W. Cao, Z.T. Lin and X. Lin 337
Enhanced Light Absorption and Minority Carrier Lifetime for Pn+ Multicrystalline Silicon by Treatment with HF/H2O2-Based SolutionsW.Y. Ou, W.M. Lu, L. Zhao, W.J. Wang and Z.Q. Ma 341
Chapter 6: Surface Engineering/Coatings
Improvement of Working Efficiency of Cutting Tools by Modifying its Surface Propertiesby Application of Wear-Resistant ComplexesA. Vereschaka 347
Correlation of the Microrelief of the Surface of Structure and Magnetic Properties of OxidicCoverings on the TitanA.M. Frolov, P. Kharitonskii, C.A. Boev, V.S. Rudnev, I.V. Lukiyanchuk, M.V. Adigamova, I.A.Tkachenko and A.Y. Ustinov 352
Research on Load-Carrying Performances of Magnetic-Fluid Lubrication for Mill Oil-FilmBearingJ.M. Wang, Q.X. Huang, J.Z. Sun, X.J. Huang and J.F. Kang 356
Non-Smooth Characteristic on Biological Surface and Development of Bionics Non-SmoothDiamond BitC.M. Zhong 360
Laser Glazing of Peacock Blue Glaze on PorcelainH. Wu, J.W. Fan, M.J. Chao, L.J. Fu and H. Chen 366
The Temperature-Sensitive Behaviors of SMPU/PNIPAM Semi-IPN FilmsZ.X. Xu, Z.W. Dai and Y. Xue 373
In-Situ Synthesized WC Particles Reinforced Fe-Based Composite Coating by Argon ArcCladding with Tungsten PowderY.F. Xiao, T. Ming, L.L. Peng, J.X. Gong and Y.H. He 378
Experimental Study and Modeling of the Zinc Coating ThicknessP. Michal, M. Gombár, A. Vagaskà, J. Pitel and J. Kmec 382
Research on the Relationship between Bionic Surface Friction Coefficient and InterfaceMediumB. Xu, Z.Y. Fu and Z.Y. Sun 387
Improving the Efficiency of the Cutting Tools Made of Mixed Ceramics by ApplyingModifying Nanoscale Multilayered CoatingsA.S. Vereschaka, S.N. Grigoriev, E.S. Sotova and A. Vereschaka 391
Plating Hard Chrome Plating Alternative Technologies - HVOF Tungsten Carbide CoatingY. Zheng 395
Prediction of Leakage Based on the Change of the Surface TopographyR.Y. Chen, G.L. Peng and X. Li 399
Study on Al Coating and Black Passive Film on Steel SurfaceL.Y. Niu, Y.C. Su, Z.M. Shi, J.X. Lin and G.Y. Li 403
Chapter 7: Environmental Materials and Environmental Protection,Biomaterials and Microbiology
d Advances in Manufacturing Science and Engineering
Study on Browning Degree of Fresh-Cut Purple Sweet Potato and its Inhibition duringStorageL. Gao, K.D. Li, M.P. Zhu and Y.C. Li 409
Preparation and Research of Porous Hydroxyapatite Whiskers/KGM Composite BoneScaffoldsM.H. Huang, Q.H. Chen, L. Lei, D.C. Wang and T.T. Yan 415
Beneficiability Study of the Blast Furance Dust from Tangshan Iron and Steel CompanyJ.X. Zhang, F.S. Niu, L. Li and J. Xie 420
The Manufacture and Nutritional Analysis of the Solanum tuberosum Jam with MaterialPropertiesS.Q. Hu 424
Effects of Temperature on the Growth and Product Accumulation of Chlorella sp.B.L. Lu, L. Qi and M.X. Li 428
A Theoretical Model Research of Rice Water Stress Index Based on Automated InfraredThermal ImagingM.C. Cao, W.Z. Zhang, Y.D. Han, C. Yao, Y.T. Wang and G.H. Ding 433
Rapid Biomimetic Deposition of Drug-Loaded Apatite CoatingsL. Bao, J.X. Liu, F. Shi, L.P. Zhang, Y.Y. Jiang, G.S. Liu and Z.Q. Hu 439
Characteristic of Bamboo Paper Sludge by Means of Fourier Transform Infrared andElemental AnalysisX. Wang, C.G. Wang, S.Y. Zhang, Y.W. Pei and M.L. Cheng 443
Environmental Dyeing Technique the Application of Low Liquor Ratio DyeingJ.F. Liu and X.P. Zeng 448
Application of TOPSIS Model Based on Vague Set Entropy in the Evaluation ofGroundwater QualityW.Z. Yu and D.S. Tang 452
Spatial Distribution and Assessment of Soil Heavy Metals in Suburb Cropland, SuzhouCity, Anhui, ChinaQ. Li 457
As Pollution Evaluation of Vegetable Planting Soil in Suzhou CityD.S. Xu, H.M. Su and Y. Gao 461
Copper Pollution and Its Assessment of Roadside Soils in Suzhou CityY.F. Han and Q. Li 465
Analysis and Assessment on Heavy Metal Contamination of Tuo River in SuzhouS.L. Huang 469
Combined Corrosion and Fatigue Degradation of Nitinol ImplantsS. Major, S. Hubalovsky and J. Sedivy 474
Effect of Wet Storage on Return Yellow Performance of High Yield Chemical PulpY.N. Xu, B. Sun, Y.X. Liu, L. Bao, Y.L. Duan and D.F. Zhang 478
Removal of Cadmium Ions from Aqueous Solution by Nanostructured CarbonatedFluorapatite Bearing Siliceous PhosphoriteH.B. Shi, Y. Liu, H. Zhong, X. Tian and M.H. Liao 482
Effect of Membrane Bending Stiffness on the Deformation of ErythrocytesG.Y. Jiao and R.J. Zhang 487
Rapid Identification of Microorganisms Isolated from Pickled Vegetables by MALDI-TOFMass SpectrometryZ.L. Tan, Y.Q. Wei, S. Liang, R. Zhang, M. Liu and S.R. Jia 494
Assessment on Pollution Level and Ecological Risk of Heavy Metals in Pond Sediment ofSuburban DistrictH.M. Su 498
The Preparation of Micro-Molecular Dextran in Sub-Critical Water/CO2S.Q. Liao, X.Y. Peng, X.W. Zhang, K.L. Huang, B. Wang, J.W. Gan, Q.R. Xie, W.J. Nong andK.X. Li 502
Supercritical Carbon Dioxide Extraction of the Fatty Acids from Pacific white ShrimpWaste (Litopenaeus vannamei)X. Yang, T.H. Zu, Q.W. Zheng and Z.S. Zhang 506
Preparation of ε-Polylysine Modified Silica NanoparticlesZ.L. Tan, B. Xing, S.R. Jia and F.L. Yao 511
Advanced Materials Research Vols. 712-715 e
Screening of Biosurfactant-Producing BacteriaJ.C. Wu, L. Yang, Y. Zhao and X.L. Zhang 515
Time Change Rule and Source Identification of Nitrogen and Phosphorus Pollution onHuihe River in Suzhou CityJ.M. Fu, W. Gong, X.Y. Chen and G. Fang 520
Adsorption of Cr Ion by Activated Carbon Prepared from Corncob Xylitol ResidueJ.W. Xue 527
Adsorption of Corncob Hydrolysis Residue on Cr (VI)J.W. Xue 531
Evaluation of the Measurement Uncertainty of Monosomic Ginsenosides in GinsengM. Zhang and S.L. Yang 536
First Principle Study on Mn-Doped Ceria with Different Doping ConcentrationZ.G. Yan, T.J. Zhu, A.G. Xuan and Y.X. Wu 541
Chapter 8: Processing Technologies of Materials and Minerals
Numerical Simulation and Process Optimization of Aluminum Alloy Connecting Rod Basedon ProCASTH.F. Lu, R.F. Chen, Y.H. Zhao, L. Wu, Z.L. Li and H. Yang 549
Research of the Grinding Mode Applied by the Cranfield BoX Ultra Precision GrindingMachineZ.D. Jiang, S.M. Yang, J.L. Wang, G.T. Yuan and X.Y. Long 553
The Discussion of the Relationship between Grinding Efficiency and Three Kinds of Factorsin the MillC.M. Wang, G.Z. Zhuang and Q.H. Wang 559
Method & Case Study of Cutting in Offshore Structural Member RemovalY.H. Chen 565
Study on Short Stroke Control in Roughing Stage of Continuous Hot Strip RollingR. Ren and X.P. Zhang 569
Micro Machining Simulation Analysis by Finite Element MethodZ.M. Yin and Y.J. Dai 575
Chemical Mechanical Grinding Wheel for K9 Optical GlassB. Wang, H.Z. Dai and Z.J. Jin 579
Research Status and Development Trend of Magnetically Controlled Welding TechnologyH. Li, Q.J. Sun, X.M. Liu, H.Y. Zhao and J.C. Feng 584
Experimental Study on NO Pre-Oxidation in C3H6/NO/N2/O2 Mixture by Non-ThermalPlasmaX.H. Li, X. Wei, Y.X. Cai, W.H. Han and K.H. Li 590
The Optimized Design of Manufacturing Process of Shrub ScrimberY.F. Li, Y.C. Hu, L. Zhang, J. Yao and J. Yuan 597
XPS and Spectroscopic Ellipsometry Study of Composite SiNx/DLC Prepared by Co-Deposition of RF Magnetron and Filtered Cathodic ArcP. Bunnak, Y.P. Gong, S. Limsuwan, A. Pokaipisit and P. Limsuwan 601
Research on the Processing Method of the Special Tool Pear-Shaped Needle in SpinneretManufacturing IndustryS.Y. Liu, P. Feng and C.C. Yang 606
Process Optimization and Properties of Laser Cladding High Vanadium High Speed SteelCoatings on Nodular Cast IronN.J. Xu, J.B. Lv, T. Sun and C.S. Liu 611
Hot Forging Die Composite Manufacturing TechnologyY.B. Li, J.Z. Deng, Y. Yang and J. He 615
Simulation Analysis of Four Teeth End Mill Cutting Process Based on the FEM MethodX.H. Wan, J.G. Wang, Z.W. Dong and J.L. Shi 619
Microstructures and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded JointsD. Wang, C.S. He, Z.Y. Qi, H. Wang, X. Zhao and L. Zuo 623
Modeling and Numerical Simulation Research on Hollow Steel Ingot Forging Process ofHeavy Cylinder ForgingM. Liu and Q.X. Ma 627
f Advances in Manufacturing Science and Engineering
Research on Simulation Process of Rock Broken by TBM HobL.D. Zhu, J.J. Wu, C.G. Liu, W.W. Liu and S. Xu 633
Research on Bending Angels of Laser Peen Forming without Confine LayerH. Ding, R. Zhang, Y.L. Wang, B. Wu and M. Zhou 637
The Impact Analysis of Stamping Process Factors Based on DynaformZ.G. He, Y.P. Zheng and G. Yan 642
Microstructure and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded Joints UsingHomogeneous Welding WireH. Wang, C.S. He, H.J. Zhang, D. Wang, X. Zhao and L. Zuo 647
An Approach to Improve Thickness Uniformity of TA15 Tubular Part Formed by GasBulging ProcessG. Liu, K.H. Wang, Y. Xu, B. Wang and S.J. Yuan 651
Study of Hot Deformation Behavior in GH4169 SuperalloyD.X. Wen, Y.C. Lin and M.S. Chen 658
Springback Distortion Research on Offset Strip Fin Based on ANSYSY.L. Liu and S.D. Zhang 662
Characteristics of YAG-MIG Hybrid Welding 6061 Aluminum Alloy with Different StatesF. Xu, Y.F. Guo, L. Chen and J. Yang 666
Device and Experiment of Incremental Draw Forming of DishQ.F. Zhang and J.C. An 670
Thermal Deformation Property and Constitutive Model of AZ80 Magnesium AlloyF. Wang and Z.T. Wang 674
Process Design and Thermal Performance in Deep Drawing of SiCp/2024Al CompositeSheet Using Pulse Current HeatingX.M. Lai, Z. Wang, Y.L. Zhang, B. Wang, K.F. Zhang and G.F. Wang 678
Research and Application of Finite Element Method on the Simulation of Graded Self-Lubricating Ceramic ToolsC.L. Wang, C.H. Xu and X.G. Xu 683
Comparison of Methods for the Sulfur Compounds and Elemental Sulfur Analysis in High-Sulfur Natural GasQ. Luo, Z.Q. Tu, Z.L. Ji, X.L. Xiao, H.G. Chang and W.X. Xu 688
Transient Liquid Phase Bonding of T91 Steel Using Two-Step Heating ProcessX.G. Wang and X.G. Li 701
Study on Microstructure of a Gear Shaft during Hot Forging ProcessG.C. Wang, B.H. Hao, C. Feng and T. Wang 705
Laser Cladding Device for In Situ Repairs of Marine CrankshaftsT. Torims 709
Effect of Finish Rolling Deformation Conditions on Microstructure Refinement of Ultra-Deep Drawing Hot Rolled Steel SheetsX.C. Li, Z.P. Zhuang, W.X. Zhu, J.H. He, T. Jiang and L.S. Yang 715
Study on Process Parameters of Low Frequency Torsional Vibration Tapping of Difficult toCut MaterialsF.Q. Han, Z.Z. Li and D.Y. Zhang 719
Analyse and Control Research about the Cause of Shape Defects on Hot-Rolled Strip SteelX.C. Li, T. Jiang, W.X. Zhu, J.H. He, A.Q. Li and K.N. Shao 725
The Research on Two-Component Materials Mixed Method for Vacuum CastingZ.Y. Zhang, H.G. Zhang, Y.Y. Liu and Q.X. Hu 729
The Prickle and Pressure Comfortability Evaluation of T/R/H Multi-Component FabricY.F. Duan and J.W. Yao 735
Finite Element Analysis on Residual Stress of Laser Brazing Diamond WheelZ.B. Yang and P.F. Luo 739
Improved Flotation of Oolitic Hematite Ore Based on a Novel Cationic CollectorZ.Q. Rao, Y.S. Zhang and Y.C. Jin 743
Study on Cross-Flow Solid-Liquid Separation TechnologyX.X. Liu, Q.Y. Pan and H. Su 748
Numerical Simulation for Distribution of Void Fraction in Water Model of ContinuousCasting MoldT. Zhang, Z.G. Luo, H. Zhou, C.L. Liu, J.J. Sun, L.H. Han and Z.S. Zou 755
Advanced Materials Research Vols. 712-715 g
Exploiting the Influence of Oxidization on Ultra-Fine Copper and Nickel Sulfide ContainingPt-Pd in Yunnan MineM. Tang, B.L. Ge and S.M. Wen 760
The Optional Study of Refined Feldspar Processing from Kyanite TailingsS.J. Yuan, Z.Y. Shen and X.L. Lu 764
The Research and Evaluation of Double Excitation Inorganic Adjustable Plugging AgentQ.W. Liu, T. Wang, J.G. Wang and J. Wang 769
Study on the Evaluation Method of Deep Profile Control and Flooding EffectJ.C. Wu, Z. Wang, Y. Zhao and X.L. Zhang 773
The Construction, Problems and Solutions of Yunnan Germanium Technology ChainF.C. Li 778
The Influence of Cooling Water Flow to Purify the Metallurgical Grade Silicon byDirectional SolidificationT. Lin, D.J. Zhang, C.Y. Duan and D.L. Lu 784
The Kinetic Research on the Disperse Dyeing Process for PLA FabricZ.J. Fu, H.F. Huang and Y.F. Sun 788
Numerical Simulation of Low-Permeability Fractured Reservoirs on ImbibitionY.Q. Wu, J.S. Li, X.H. Zhang, J. Zhou and T.J. Liu 792
Die Compensation Design for Stamping a High Strength Automotive Bumper InnerF.K. Chen and S.W. Liu 796
Chapter 9: Building Materials, Construction and Architecture
Investigation and Design Analysis on Residential Area Lighting in DalianD. Wang, M. Liu and B.G. Zhang 803
Study on Large Stadium Space Layout PlanningX.J. Chen 807
The Role of the Media Facade Art in the Development of the CityL. Gu and F. Gu 811
Dynamic Stability Analysis of Steel Concrete Composite of Ribbed Shell under SteppedLoadsY.Z. Chang and Y.G. Kang 815
Dynamic Stability Analysis of Steel-Concrete Composite Ribbed ShellY.G. Kang, Y.Z. Chang, T. Xu and Y. Kang 822
Research on the Architectures and Murals of DongYue Temple in Jin Memorial TempleZ. Yan 827
Gymnasium Building Materials Performance-Type ResearchX.J. Chen 831
Interactive Analysis between Steel-Concrete Composite Deep Beam and Steel FrameY. Liu and H. Zheng 835
Study on Humanization Design of Overall KitchenY. Gu and W.L. Gu 842
Comparative Analysis of Different Types of Rigid-Pile-Reinforced EmbankmentsW.F. Huang, H.H. Mo and Y.G. Fang 845
Study on the LED Media Facade in Urban Space Using AnalysisF. Gu and Y. Gu 850
Study of Seismic Inversion Technology Forecasting Sandstone Waterborne of Coal RoofY.Q. Ma, K. Liu, T. Chen and G.D. Pei 854
The Study on the Warm Mix Asphalt Mixture RatioY.H. Wang, X.M. Tan, X.J. He, L. Wu, B. Dong and S.Q. Zhou 858
Research on Longitudinal Cracking Behavior of Prestressed Cconcrete Hollow Slab due toCyclic Loading ExperimentW.X. Zhao, P. Lu, H.J. Wu and Z.X. Zhou 865
Design and Heat Transfer Property of the Warming Compound Blocks Contained SlagConcreteJ.S. Zheng, G.Z. Zhang and S.F. Zhu 869
h Advances in Manufacturing Science and Engineering
The Study of Correction Method for Soil-Water Characteristic Curve of Swelling-ShrinkingSoilP. Du, X.L. Liu and X.Y. Li 873
Succession and Development of the Traditional Commercial CentersJ.Y. Yang, B.X. Shi and T. Zhang 877
Study on the Architectural Design with the Conception of Low CarbonQ. Guo, L.Q. Zhao and Q.Y. Liang 883
Ecological Development of Building MaterialsQ. Guo, Q.Y. Liang and L.Q. Zhao 887
The Standardization of Government Supervision Procedure in Construction EngineeringQuality (Security)H.D. Guo, X. Wei, Y.X. Zhang, E.H. Hao and L.Z. Lei 891
Effect of Foaming Temperature and Holding Time on Foam GlassL. Wu, Y.L. Zhao, R.F. Chen, H. Yang, Q.Q. Li, Z.L. Li and H.F. Lu 897
Creating Structural Analysis Model from IFC-Based Structural ModelX. Wang, Z.P. Cui, Q.L. Zhang and H.Z. Yang 901
Properties of Alkli-Activated Slag Cement Compounded with Soluble Glasses with a HighSilicate ModulusQ. Pan, B. Zhu, X. Huang and L. Liu 905
Numerical Simulation of Masonry Wall under Explosive Load insideJ.J. Liu, Y.G. Lu and J.S. Lei 909
Study on Preparation of Construction Waste Paving BrickL.X. Wang, G.H. Pan, F.Y. Li, H.M. Wang and G.Z. Li 913
Research in the Preparation of Paving Bricks with Construction GarbageL.X. Wang, G.H. Pan, F.Y. Li, H.M. Wang and G.Z. Li 917
Use of Septic Tank Sludge as Raw Material in the Manufacture of BricksM.D.P.D. Ingunza, A.D. Lima and A.L.C. Araujo 921
Economic Indicators Optimization of Rectangular Concrete Filled Steel Tubular AxialCompression ComponentsH.G. Gao and X.F. Cui 925
Probability Assessment of Analysis of High-Rise Buildings Seismic ResistanceJ. Králik and J. Králik 929
The Effect of Utilization of Geogrids on Reducing the Required Thickness of UnpavedRoadsS.A. Tabatabaei and A. Rahman 937
Building Energy Conservation Technology Based on Solar Energy UtilizationY. Zhao and C.L. Meng 942
Dewatering Design and Discuss of Foundation Pit Excavation in Disposal Site withContaminated SoilG.B. Ge, Z. Ding, X.J. Wei and Z.G. Nie 946
Bearing Capacity of Concrete-Cored DCM Pile Composite GroundW. Chi, Y.F. Xu and P. Dong 951
The Birth and Use of Concrete and Reinforced ConcreteF. Wang 955
Study of Surface Modification of Recycled Aggregate and Mechanical Properties of theResulting ConcreteS.Q. Yang, T. Peng, W.C. Tang and H.Z. Cui 961
Performance Analysis of Reinforced Concrete Structures Strengthened with BFRPZ.B. Kan and Y.R. Li 966
Bulk Density of Bitumen SheetsJ. Plachy, V. Petránek, K. Šuhajda, J. Vysoká, T. Petricek, P. Bednářová and K. Sidibe 970
Application of Catastrophe Theory in Surrounding Rock StabilityD.G. Kong and K. Hu 974
Resistance of Soil to a Vertically Vibrating PileZ.S. Gao and Q. Ren 979
Technology Research on the Subsidence Control of Abutment Back under SeismicLiquefaction ConditionsL.J. Ma, J.Y. Zhang and Y.L. Wang 984
Advanced Materials Research Vols. 712-715 i
Chapter 10: Analyze and Design of Structures: Strength andRobustness
Research on Recrystallization and Crack Fracture of Single Crystal Turbine BladeS.F. Li, D.H. Zhang, K. Bu and Q.S. Luo 991
Simulation and Experimental Mechanical Properties of SiCn/2024 Al Alloy Co-ContinuousCompositesY.W. Qin and S.K. Lu 997
Three-Dimensional Modeling and Finite Element Analysis of the Hydraulic SupportL.H. Li and X.W. Zheng 1002
Fatigue Analysis of the Bridge-Type Grab Ship Unloader Based on Finite Element MethodG.M. Cao, F.J. Qiu and Z.Y. Zhao 1006
Analysis of the Design Method for the Casual Anchor Skeleton at the Closure for PCContinuous Box Girder BridgeT. Li, X.W. Sheng and H.S. Zhang 1011
Modal Analysis of Compressor Impeller with Crack and Blade FractureM.J. Li, H.Q. Wang and W.M. Wang 1018
The Finite Element Analysis of a ShaftG.W. Zhang, L. You and Z. Li 1022
Numerical Simulation of Deflection Fracturing with Finite Element Method ConsideringCrack Initiation AngleZ.Y. Liu, P.P. Zhang, H.Z. Wang and X.R. Zhu 1027
Static Characteristics Research of Bed with Three-Point Support Using BionicsH. Zhang and Y.G. Shi 1032
The Finite Element Analysis of Pile-Raft Foundation after Optimization of the RaftThicknessW.Y. Wang and T. Zhao 1037
Stiffness Calculation of Boiler Horizontal SupportH.J. Liu and S.Y. Zhi 1041
Impact Resistance Research of Composite Laminate StructureH.P. Li, S. Li and F.L. Huang 1045
Transmission Parameters Optimization Design and Load Factor Formula Fitting of WNGears DriveX.K. Mu, Y.G. Li, D.H. Chen and C.C. Li 1050
Influence of Screw Spacing on the Strength of Self-Drilling Screw Connection for the HighStrength Cold-Formed SteelS.F. Sapiee and H.H. Lau 1054
Pressure Cooker with Composite Bottom Thermo-Mechanical Coupling SimulationX.H. Zhang, H. Yang, H. Zhang, H. Liu and H.F. Guo 1058
Determination of Residual Fracture Toughness of Post-Fire ConcreteR. Zhang, Z.D. Lu and J.T. Yu 1062
Material Flaw Sizing by Ultrasonic Multipath DetectionX.Z. Shen and P. Li 1067
The Broyden Method for M-P-Φ Relationship of Beam-Column with Residual StressesJ. Qin, Y.J. Xia and J.M. Zhang 1071
A Software of Pre-Buckling Analysis of Laminated Plates and Shells Based on StiffnessMatrix DeterminantZ.L. Cheng, C.S. Han and H.M. Zhang 1075
Structural Analysis and Improvement of Large-Scale Forklift's Wheel RimH.Q. Wang, H.Z. He, H.Y. Lu and R.X. Huang 1080
Based on Micromechanical Damage of Experimental Study on 20 Steel Notched Specimen'sAcoustic Emission CharacteristicsY. Zhang, Z.X. Wang, A.L. Liu and H. Gao 1084
The Progressive Optimization Model on the Corrosion Rate of the Grounding GridF.L. Dai and W.Q. Xie 1090
j Advances in Manufacturing Science and Engineering
Research and Application of Material Corrosion Prevention Technology in the Completedwell System for Sour Gas wellL.F. Li 1096
Chapter 11: CAD/CAE/CAM: Theory and Practice of Application
Solidworks Engineering Drawing Automatically Adjust Technology and ImplementationG.F. Zhang, Y.F. Yang, J.Q. Hu, Y. Yang and H.W. Ma 1103
Research of 3D Parametric Design System of Worm Drive Based on Pro/EH.B. Niu and X.H. Li 1107
The Study of ANSYS-Based Finite Element Calculation Model for Push-Back RackB. Li, Z. Wang and Y.L. Wang 1111
FEM Analysis of Hydraulic Dismantling Feasibility on Shaft-Sleeve Interference FitsJ. Shen, S.L. Rao, G.F. Liu, D. Zhou and X.D. Du 1116
Research on Precise Constraint Reconstruction of Section DataX. Zhang, H.B. Zhang and X.C. Zhang 1122
Numerical Simulation on the Flow Field inside an Ultrasonic Water MeterH. Chen, Z. Kai, Y. Ling and H.J. Zhang 1126
Finite Element Analysis of the Car Door Sinking StiffnessH.J. Liu and S.Y. Zhi 1131
Handling and Roll Prediction of Electric Drive Mining TrucksY.M. Yin, J. Yang and W.M. Zhang 1135
A Simulation Platform for the Development of Vehicle ACC SystemsS.M. Zhang, H.Z. Liu, F. Han and S.S. Wang 1139
The Helmet Reverse Forming and Static Characteristic AnalysisS.G. Wang, G.X. Wu, C. Cui and X.B. Li 1145
Study on Entity Model's Fast Surface ReconstructionS.G. Wang, J.Z. Zhang, H.J. Zhang and S.F. Jiang 1149
Parametric Design System of Precision Forging Gear DieZ.R. Wang, Q.P. Zhang, C. Wang and G.X. Cai 1153
Design and Development of the Loading Subsystem in FEM SystemM.R. Xu, B.W. Wang, M. Li and J.X. Wang 1158
A Static-Stability Analysis Method for Ships Based on the Second-Development of SolidEdgeZ. Lin, Y.X. Zheng, J. Zou, H.B. Sun and D.H. Xu 1162
Finite Element Model and Fluid-Structure Interaction Analysis of the Intravascular StentW.Y. Yu and J.G. Wang 1167
Exploration of Non-Revolved Parts Modeling Based on MBD and Pro/ENGINEERL.X. Wang, Y. Guo and M.Y. Guo 1171
Cone Section Member Integration Design and Production MethodsS.Y. Wang, Z.M. Yang and Y. Wang 1175
Based on OOA Modeling of Gantry Crane CAD SystemG.N. Xu, J.S. Liu and J.B. Yang 1180
BIM-Based Integrated Design Software for the Steel Structure of Industrial PlantZ.G. Chang 1185
Second Development of Panel Furniture Based on Pro/EY.H. Yang and X.Q. Zhong 1189
Chapter 12: Mechanical Engineering: Research, Development andSolutions
Simulation Study about Dual Spark Plug Position for the CNG Engine Combustion ProcessC.Q. Song, J. Li, D.W. Qu and K. Yu 1197
Study on Numerical Simulation and Performance of the Secondary Throttle Choke Used inthe Oil FieldH.F. Zhao and Y. Xu 1201
Advanced Materials Research Vols. 712-715 k
Simulation of Kinematics and Dynamics of Large-Displacement Motion SimulatorY.F. Zhou, K. Liang, Z.Y. Zhang, T.S. Song and W.B. Zhou 1205
Finite Element Analysis about the Influence that High-Speed Motorized Spindle SpindleSystem Material has on its Temperature FieldK. Zhang, X.N. Ma, L.X. Zhang, W.D. Yu and Y.H. Wu 1209
Analysis on the Error of Semi-Infinite Body Model in Roll Flattening CalculationZ.W. Yuan, H. Xiao, H.B. Xie and S.K. Zhang 1213
Numerical Simulation of Tip Vortex in Air RefuelingX.L. Liu, S. Li, J.S. Jiao, Y.X. Liu, L. Ming and X.J. Liu 1217
Simulation and Analysis of the Hybrid Bus Performance Based on AVL-CruiseK. Yu, C.Q. Song, L.Y. Fan and H. Qin 1221
Design of Amplitude Transformer for Ultrasonic Vibration Milling System Based onABAQUSY.F. Gao, S.Q. Wang and D. Lu 1226
Parameter Studies for Wheel Wear Using a Flexible WheelsetN. Wu and J. Zeng 1230
Testing and Modeling of Mechanical Parameters in Resistance Welding MachinesP. Wu, Y.A. Zhang, C.Z. Xuan and Y.H. Ma 1235
Stability Analysis of Chatter System on Ultrasonic HoningY.P. Shao, X.J. Zhu, M. Liu and Z. Liu 1241
Parametric Study of Graphite Insert ErosionR. Liu, X. Chen and C.S. Zhou 1248
Numerical Simulation of Two-Phase Flow under High Acceleration in SRM withSubmerged NozzleH.F. Xue, X. Chen, Y.P. Wang and Y. Zheng 1253
Numerical Simulation of Cavity Flow within the Flow FieldJ.Y. Cai and H.J. Chen 1259
Numerical Simulation of Flow in Imported Steam Turbine Inlet Components withEquilibrated Holes in High PerformanceS. Tu, S.M. Wu, Q. Zhou, H.M. Zhang and X.Q. Zhu 1263
3D Numerical Simulation of the Influence of AGD Beams on Gas Distribution in COREX-3000 Shaft FurnaceH. Zhou, Z.G. Luo, T. Zhang, J.J. Sun, L.H. Han, X.R. Liu and Z.S. Zou 1268
The Research on Structure Design of LED Fluorescent Lamp Microstructures Diffuser andthe Effect on the Optical PropertiesX.T. Zheng, H.L. Wei, S.B. Li, D.M. Wu, Y. Liu, Y.J. Zhang, H. Xu and Y. Zhou 1274
Effect of the Light Diffuser Plate of Micro V-Cut Prism Structure on the Optical Propertyof LED Daylight LampX.T. Zheng, X.L. Gao, S.B. Li, D.M. Wu, Y. Liu, Y.J. Zhang, H. Xu and Y. Zhou 1279
Finite Element Analysis of Grinder Plate with Bone-Removal FacilitiesS.L. Li and Z.G. Hu 1284
A. Kutin and M. Turkin 1288
Hybrid MPI + OpenMP Parallelization of Scramjet Simulation with HypergraphPartitioningY.Y. Zeng, W.T. Zhao and Z.H. Wang 1294
Intelligent Optimization Design on Brake Experiment PlatformK.N. Liu and J.Y. Ye 1298
Design of Beam Waveguide Antenna Structure for TT&C ShipG.F. Pan, N.P. Mao, S. Liang, Y. Xie and J. Xue 1302
Stability Features of the Saucer-Shaped Blend-Wing-Body AircraftL.L. Wang and G. Gao 1307
WEDM Performance Analysis Based on Entropy Fuzzy EvaluationY.Q. Yang, X.Y. Li and M. Zhang 1312
Impact Factors Analysis of Buildup Well Test in Low Permeability ReservoirX.H. Chen, T.J. Liu, R. Liu and P.X. Diwu 1316
Effect of the Ignition Time on the Turbocharged Lean-Burned CNG EngineX. Lu, D.W. Qu, J.X. Pang and J.F. Lu 1320
l Advances in Manufacturing Science and Engineering
Optimization of the Anode Current Collector Layer Thickness for the Cathode-SupportedSolid Oxide Fuel CellW. Kong, S.C. Su, X. Gao, D.H. Zhang and Z.D. Yu 1325
Numerical Simulation on Cylinder Flow Field of DieselY.D. Song, Y.N. Yuan, C.P. Wu, Y.W. Li, P.Z. Qi and S.B. Wang 1330
Study on the Motion Response of Buoy in Sea ConditionY.G. Wang, X.H. Tong, L.S. Zhu and Y. Liu 1335
Experimental Research on Belt Type of Precision Seed-Metering DeviceD.Y. Geng, R.C. Du, D.L. Zhang and L. Dan 1339
Research on Parameters Indentification of Synthesis Load Model Considering DistributionNetwork ConnectionG.P. Shi and P. Gu 1343
The Study Based on LABVIEW of the Positioning Accuracy of Spinneret Microporous FineMachineS.Y. Liu, P. Feng and C.C. Yang 1347
Study of Eddy Electromagnetic Fields Induced by Propeller Rotating in the Earth'sMagnetic FieldJ.W. Zhang, S.G. Gong and X. Lu 1351
Nonlinear Dynamic Analysis of Rub-Impact Rotor System under Different ParametersL. Xiang and L.L. Hou 1355
The Analysis of the Pulverized Coal Deposition in the Pump Cylinder in Drainage andMining of the Coal Bed Methane (CBM)Y.P. Sun, N. Zhao and W.T. Qu 1359
Research of Potential Energy Recycling System on Port Tyre CranesJ. Tang, Y. Hu, L.J. Su, L.H. Hu and J.Q. Hu 1363
Designing Piezoelectric Harvesting Unit from Road VibrationC.H. Sun, G.Q. Shang, Y.K. Zhang and J.H. Du 1368
The Development of the High-Voltage Modulators Based on TM703FB Vacuum Tube forAuxiliary Heating on HL-2AQ. Li, W.M. Xuan, X.H. Mao and Y.L. Wang 1372
Numerical Simulation of Swirling Burner in Cold StateM. Li, C.Y. Wang, L.M. Ren, B.T. Zhang, L. Li, L.S. Sun and D.Y. Xie 1376
Test of Coal Slime Pumping by Single-Screw PumpH.X. Yang, S.Y. Zhang, X.K. Jia, X.D. Hao and M. Wu 1380
The Testing and Research of a New Large Bag Filter with the Diaphragm ValveL. Liu, Y. Peng and K. Cheng 1386
The Research of the Dynamic Characteristics of Horizontal Jig Boring MachineZ. Li, X.S. Zhao and D.W. Zhang 1391
A Cosserat Rod Model of Multi-Symplectic Structure and its Numerical TreatmentH.B. Zhang, M.S. Jiang and Y. Wu 1395
Dynamic Analysis and Simulation of a New Steering Mechanism for Point-the-Bit RotarySteerable SystemY.Z. Li, W.T. Niu, H.T. Li and S. Li 1401
Transmission Ratio Optimization of Large Bus with Optimization Goal NormalizationProcessedC.X. Ren, W. Zhou, W.L. Dai and L. Zhang 1406
Asymmetric Sinusoidal Motion Effect on Aerodynamics of a Plunging AirfoilY. Zhang, R.S. Yuan, K. Lu and Y.H. Xie 1410
Vibration Analysis of Complicated Rotor-Bearing System by Beam Element and StrainEnergy MethodL. Wu, Q. Yuan and X. Liu 1414
Kinematics Analysis and Simulation of Main Components of Beam Pumping Unit Based onMATLABJ.L. Huang, Y.F. Wang and X.W. Dang 1420
Performance Simulation Comparison of Five-Plunger-Type and Three-Plunger-Type StrawFuel Forming MachineF.H. Wang, B.Y. Ma and X.J. Bu 1424
Design and Testing of a Scroll Pump EfficiencyS. Litikorn and P. Kritmaitree 1428
Advanced Materials Research Vols. 712-715 m
Review on the Dynamics of High-Speed Motorized Spindle SystemX.M. Dai, H.J. Wang and Q.S. Han 1435
Mode Analysis of Lattice Main Boom for Crawler Crane Based on ANSYS_WORKBENCHG.N. Xu, J.B. Yang and J.S. Liu 1439
The Application Research of the Hydraulic Breaking HammerH.J. Liu and S.Y. Zhi 1444
The Underwater Vehicle Cabins Wave Loads Linear-Simplified Calculation MethodX.H. He, Y. Yang, X.M. Liu, X.F. Tan and Y.Y. Li 1448
Launch Dynamic Characteristic of High Initial Velocity Grenade Launcher with LowRecoilJ. Song, Z.Q. Liao and M. Qiu 1455
Study of Influence on Auto-Weapon Launching Performance by Nozzle StructureD.P. Xian, Z.Q. Liao and M. Qiu 1460
Analysis of Arc-Shaped Support Plate Influence on Muzzles Vibration of Gatling Gun Fireon TripodJ.S. Li, Z.Q. Liao, M. Qiu and F. Wang 1464
Research on Dynamics of High-Efficiency Recoil-Reducing for Muzzle Brake of Chain GunJ.B. Xiao, G.L. Yang, Y. Zhao and M. Qiu 1468
Modeling and Acceleration Response Analysis for Vehicle DrivabilityP.H. Liu and T. Zhang 1473
Reliability Analysis of Nuclear Power CNC Wheel Groove Milling Machine Based on GrayTheoryZ.W. Li, D.L. Song, C.Y. Mo and Y.T. Chen 1477
Finite Element Analysis of the Spindle Ram-Slider Assembly Body on the Domestic LargeGantry Machine ToolX.Y. He, Y. Tian, H.W. Zhao, C.L. Shi and P.X. Liu 1487
Modal Analysis of the 1.5MW Wind Turbine TowerB.F. Cao and H. Yu 1494
Structural Non-Probabilistic Reliability Analysis Based on Imperialist CompetitiveAlgorithmY. Hao, G.W. Meng, F. Li and L.M. Zhou 1501
A New Response Surface Method for Structural Reliability AnalysisG.B. Li, G.W. Meng, F. Li and L.M. Zhou 1506
Design and Simulation of Piston Buffering Device for Impact HammerD.S. Zhang, Y. Tong, G.F. Wang, H.W. Ren and G.R. Zhao 1510
Structure Design of Precision Horizontal Machining Center and Multi-ObjectiveOptimization of Large Structural ComponentsQ. Yun, W.T. Niu, J.Q. Wang and L. Zhang 1514
Axial Compression and Energy Absorption Characteristics of Reduction Tubes Using a Dieunder Impact LoadH. Mao, K. He, C.J. Luo and R.X. Du 1519
Interval Perturbation Method to Structural Non-Probabilistic Reliability AnalysisZ.Z. Sun, G.W. Meng, F. Li and L.M. Zhou 1527
Numerical Research on Ship Motions in Oblique Irregular WavesM. Wu, A.G. Shi, Z.C. Wang, X. Wang and R.R. Ying 1531
Dynamic Characteristics Analysis of Axle Box Spring by FEML. Liu, W.H. Zhang and D.L. Song 1535
Effect of Wheel-Rail Contact Geometry Relationship on Vehicle Dynamic PerformanceY.J. Wang and J. Zeng 1541
The Dynamic Simulation and Strength Analysis of the Integrated General Suspension RackConnector for an Ejection SystemJ.B. Zhen, C. Xu and T. Wang 1545
Research on Ship Swaying Motion Prediction Based on Multi-Variable Chaotic Time SeriesAnalysisX.D. Yang, Z.C. Wang, A.G. Shi, B. Liu and L. Li 1550
Study on Precision Analysis and Simulation Test of Upper Slicing SystemW.H. Zhao and S. Liu 1555
n Advances in Manufacturing Science and Engineering
Applied Research of the Microstructure Replication TechnologyH.W. Chen, Y.J. Li, D.Y. Zhang, Y.J. Huang, R.B. Wu and C. Dong 1559
Research on the Key Technology in Ultra-Precision Machining of Optical Micro V-GrooveMold RollerZ.L. Zhao, H.P. Yu, D.M. Wu, Y. Liu, X.T. Zheng, J. Zhuang and P.S. Jing 1563
Chapter 12: Mechanical Engineering: Research, Development andSolutions
Thermal Error Analysis and Compensation Technology for High Precision AsphericMeasuring PlatformF. Yang, Q.H. Tang and Y.B. Guo 1571
Blade Blending and Torsion Deformation Analysis Based on its Coordinate MeasurementDataY.Y. Cheng, Z.Z. Zhu, L.Y. Wang and J. Yang 1576
Modeling Aspects of Sound Speed in Air for Ultrasonic Industrial ApplicationsV. Nicolau 1580
Chapter 13: Thermal Engineering: Theory and Applications
Three Calculation Methods for the Influence of Heat Loss by InfiltrationL.B. Lu, M. Gao and D. Li 1589
Study on the Heat Transfer Performance of Two Kinds Material for Microstructure HeatExchangerJ. Zhuang, D.M. Wu, W. Wang, Y.J. Zhang, S.B. Li and W. Hu 1593
The Effect Analysis of Fin Arrangement on Thermal Hydraulic Performance of a VehicularCoolerJ. Zhao, B.L. Xiao, W.M. Wu, X.L. Yu and G.D. Lu 1600
Performance Analysis of Solar Evacuated Tube CollectorW.B. Fang 1605
The Exergy Efficiency and Output Acoustic Power Performance Optimization of theThermoacoustic Engine Micro-CycleJ. Lin, F. Wu, J.H. Fei and T. Wang 1609
The Energy Consumption Investigation of the Hotel Central Air-Conditioning System andthe Research of Energy Saving MeasuresJ.J. Ni, L. Tao, Y.J. Wang and J.L. Wu 1614
Effects of External Window Form on Residential Building Energy ConsumptionZ. Chen, L. Bai and F. Li 1619
Thermodynamic Performance Analysis of Stirling Engine with a Nodal Analysis MethodB.Y. Song, K. Luo, H.T. Yang, K. Qin and W. Li 1625
Numerical Study on High Prandtl Number Liquid BridgeR.Q. Liang, S. Yang, F.S. Yan, J.H. Ji and J.C. He 1630
Numerical Simulation of the I-Beam during Cooling ProcessJ. Liu, F.Z. Hou and X.G. Yu 1634
Temperature Distribution of High Prandtl Number Liquid Bridge under Zero GravityR.Q. Liang, S. Yang, J.H. Ji, F.S. Yan and J.C. He 1638
Experimental Investigation on Effect of Stack on Thermoacoustic Conversion SystemPerformanceD. Wu, C. Li, X.H. Li and Y.X. Cai 1642
Chapter 14: Vibration, Noise Analysis and Control
Order Vibration Analysis of High-Speed Spindle SystemZ.P. Wu, B.Z. Li and J.G. Yang 1653
Research of the Vibration Signal for the Bridge Structure Base on Stochastic Minus MethodY.H. Zhang, Z.H. Lin and J.Q. Li 1659
Advanced Materials Research Vols. 712-715 o
Investigation on Damping Characteristics of Double Chamber Hydro-PneumaticSuspension Simulation and Experimental ResearchZ.Q. Tan, H.L. Zhu, D.F. Zhuo and J.F. Ju 1662
Research on Compression and Reconstruction of Wind Turbine Vibration Signal Based onDiscrete Cosine TransformZ.D. Huang and X.Y. Gan 1668
Research on a Building under Multi-Dimensional Seismic ExcitationsZ.Y. Sun, H. Wang, K.Y. Mao and M.S. Fang 1672
Optimum Vibration Control of a Nonlinear Damper System under Multi-Axis ExcitationsZ. Lu 1678
Parametric Studies of the Vibration Control Effects of a Nonlinear Damper System underMulti-Axis ExcitationsZ. Lu 1682
Study on Acoustic Characteristics of Aircraft Targets' Propulsion SystemY. Chen, H. Wang and S.S. Feng 1686
Research on Anti-Seismic Analysis the Overall Structure of Three-Ring Roller CoasterBased on Response Spectrum MethodG.N. Xu, P.X. Liu and H. Yang 1690
Chapter 15: Mechanical Transmission: Theory and Applications
The Contact Stress Analysis of Spiral Bevel GearH.B. Yang and H.C. Wang 1697
Strength and Stiffness Optimization of Heavy-Duty GearL. Yang 1701
The Method of Accurate Variable Curvature Crowning of Involute Straight Bevel GearF.Y. Zhang, X.J. Tian, H.Y. Cui and T.R. Liu 1705
Error Analysis of Modification Gear Generated by Grinding Worm WheelJ.J. Yang and J.J. Wang 1714
Optimization of Substituted Generating Lines of Cutting Hypoid Gears by Generating-LineMethodZ.J. Yang, Y.K. Wang, L.N. Li and X.C. Zhang 1718
Three-Roll Planetary Rolling Mill Motion Analysis and Test ResearchZ.W. Yin 1724
An Optimization Design Method of Gear TransmissionH.N. Yu 1729
Chapter 16: Electronics, Microelectronics, Optoelectronics andCommunication Technology
A Single Side-Band Modulation Circuit in Underwater Electric Current CommunicationS.H. Zhou, S.M. Feng and Z.Y. Chen 1737
Research on Improvement of the Next Generation IEEE802.11ac Channel ModelH. Cai and D.A. Han 1741
A Three Phases Z-Source Inverter TopologyJ.Y. Shi, S. Dong and W.A. Liu 1746
Two Dimensional Photonic Filter with a Circular Resonant CavityZ.X. Wu, Y.L. Shao, W.C. Li and E.D. Gu 1751
Design and Implementation of a Digitally Tunable Tracking Preselected Filter for UltraShort Wave ReceiverY.T. Chen, L.J. Su, C.J. Sun, S. Ye and J. Tang 1755
Modeling and Control of the Voltage Source ConverterG. Wang, Z.X. Sun and Y. Zhu 1760
A Signal Generator Based on AD9850X.Y. Zhang, J. Xu, X.Q. Guo, Y.T. Lan and J.Y. Tao 1767
A Study on 400V Sized Trench Power Semiconductor for Smart Power ICsE.G. Kang 1771
p Advances in Manufacturing Science and Engineering
High Accuracy Modeling Method of UTC-PD PhotodiodeH.F. Wen, Q.H. Nie, T.F. Xu, T.J. Liu, X.Y. Ying, K. Clark and Y.F. Li 1775
A New Design of CMOS Bandgap Reference Based on Genetic AlgorithmJ.H. Yu and C.C. Dong 1780
Design and Power Supply‘s Quality Analysis of the Automatic Power Distribution SystemBased on SSPCQ.L. Zhang, L. Liu and X. Jiang 1787
An Arc Welder Monitoring System Research and Design of High-Speed Camera TriggerZ.Y. Jiang 1792
Tunable Low-Pass MEMS Filter Using Defected Ground Structures (DGS)X.L. Guo, Z.L. Wang, J. Huang, Z.J. Zhang, H.H. Yin and H.F. Zhu 1798
High Beam Quality and High Power Diode Laser SourceY.Y. Gu, G.X. Wu, H. Lu and Y. Cui 1802
The Spontaneous Radiation of Verticalcavity Semiconductor Optical Amplifiers in BistableEffectZ. Li 1807
Wave Shape Transformers Based on Transformation Medium SlabsY.G. Ke, F.G. Yang and L. Qiao 1811
Throughput Analysis of IEEE 802.11e Enhanced Distributed Channel Access (EDCA)under Unsaturated Condition in One-Hop Ad Hoc NetworksL.Y. Xie and J.X. Ruan 1816
Optimization of Power and Gain in Two-Stage Op-Amp by Using Taguchis ApproachS.A. Mohd Chachuli, F. Arith and M.I. Idris 1820
BiCMOS Flip-Flop Design Based on NPN-NPN Feedback Driver CircuitsM.Q. Yao, L.B. Zhang and H.N. Ye 1826
Chapter 17: Sensor Technology
Analysis of Signal Distortion Caused by Opening Ratio Variation of Main Scale and IndexScale in Linear EncoderX. Li, L. Yin, Y.S. Shi, G.Y. Ye, H.Y. Yu and H.Z. Liu 1833
The Research about La0.75Sr0.25Cr0.5Mn0.5O3-δ Application as Dense Diffusion Barrier inLimiting Current Oxygen SensorsY.L. Wu, Q.H. Wang, H.Y. Zhao and F.S. Li 1838
The Structure of the Hermetic Chamber in Convection-Based Tilt SensorY.H. Zheng and S.L. Peng 1843
The Mobile Node Localization Algorithm Based on Monte CarloJ.G. Zheng, C.D. Wu and Z.T. Chen 1847
Deployment of Wireless Sensor Networks for Air Quality MonitoringM.W. Wang, Y. Wang and Q.H. Li 1851
Research of Electromagnetic Flowmeter with Grounding ElectrodeS. Gao, B. Li and S.Y. Yin 1856
Analysis of Quadrature Phase-Shift Error Caused by Angular Misalignment in MoiréLinear EncodersG.Y. Ye, Y.S. Shi, L. Yin, H.Z. Liu, X. Li, H.Y. Yu and B.H. Lu 1863
WSN Collaborative Target Tracking Based on Dynamic ClusteringB. Hu and N.H. He 1868
The Applications of Sensor Network for Smart SubstationY.Y. Zhang, H. Li, D.Q. Gao and J.P. Cao 1872
Improvement Methods of Apparent Permeability of Ferromagnetic CoreS.H. Zhou, Z.Y. Chen and S.M. Feng 1876
Single-Resistance-Controlled Quadrature Oscillator Using CFOAs for GMI MagneticSensorsL. Zhang and Z.M. Pan 1881
Dual-Mode Quadrature Oscillator Using Current Follower Transconductance Amplifiersfor GMI SensorsL. Zhang and Z.M. Pan 1886
Advanced Materials Research Vols. 712-715 q
Research on Rotation Modulation for INS Based on MEMS SensorsX.Y. Wang, J. Wu and W. Wang 1891
Application of Sensor on Modern Sizing Machine in Term of Intelligent ControlY. Tong 1900
Research on Direct Calibration of Electromagnetic Flowmeter in Partially Filled PipesS.Y. Yin and B. Li 1904
Using Numerical Simulation to Optimize the Design of Gas Turbine Flowmeter SensorJ.H. Pei, Z.D. Su and K. Zhang 1910
Optimizing Design of a New Micro-Structural Gas SensorC.B. Liu, X.B. Zhang, L. Liu, J.B. Zhang, S.C. Li, H. Shan and L.Y. Wang 1914
Analysis of Radial Thickness Vibration Modes of Piezoelectric Ceramic Ring Based onANSYSC.Y. Chen, L.K. Wang, L. Qin, C. Zhong and J.J. Zhou 1918
Design and Implementation a Testing Environment for Wireless Sensor NetworksZ. Fan, D.Y. Yang, L. Jun and C.H. Yang 1923
The Effect of ESD EMP Test on Wireless Antenna and Protection Network DesignZ.P. Chen, Y.W. Dai, P. Li and Z.Q. Li 1928
Path Planning of Mobile Beacon for Localization Based on Distribution of Unknown NodesW.S. Wen and L. Wang 1933
Localization and Map Building of Laser Sensor AGV Based on Kalman FilterL.X. Guo, F. Kun and W.J. Yan 1938
Chapter 18: Technologies of Measuring, Detection and Monitoring inIndustry
Application of Petrochemical Heat Equipments' State Inspection Based on Threshold Valueof Infrared Image SegmentationL.L. Cui, H. Lai, Y.W. Tang and Q. Cao 1947
An Improved Faults Diagnosis Strategy of Analog Circuit Online Using Kernel Fuzzy C-Means for the Unknown FaultP.D. Qin, Y.P. Qin and A.H. Zhang 1952
Improved Method for State of Charge Estimation of Lithium Iron Phosphate PowerBatteriesM. Li, Y. Jiang, J.Z. Zheng and X.X. Peng 1956
Ballistic Measurement and Parameter Estimation of Ballistic Missile with Early WarningSatelliteL. He and D.L. Qin 1960
Tolerance Analog Circuit Hard Fault and Soft Fault Diagnosis Based on Particle SwarmNeural NetworkB.R. Han, J.B. Li and H.Y. Wu 1965
Application of Adaptive Fuzzy Filter in Ultrasonic Test SystemB.T. Guo 1970
Analysis of Uncertainty in Standard Metal Tank Volume Verification with Monte CarloMethodJ.H. Li, R.S. Tong and S.S. Cao 1974
Research on Tooth Profile Deviations Measurement Method Based on the Optical ImageMeasuring InstrumentQ.H. Wang and F.X. Zhao 1979
Summarize and Research on the Data Acquisition of Drilling Rig Hydraulic SystemY. Liu, D.F. Li, G.H. Cao, S.L. Tian and C. Liu 1983
Research on the High-Precision Phase Simulation of DSSS SignalS.W. Li and P. Xu 1987
Thermocouple Temperature Monitor System Based on PLC in Air PreheaterL. Shi and F.S. Li 1995
Design and Implementation of Environmental Monitoring System Based on BusS. Liang, G.F. Pan, S.P. Zeng, Y. Xie and J. Xue 1999
The Improved Personnel Location Algorithm Based on RSSIS.M. Zhou and T.L. Huang 2003
r Advances in Manufacturing Science and Engineering
A Two Dimension Signal Parameter Estimation Method Based on Super ResolutionTechnologyY. Xu and J. Zhao 2007
Review on Meteorological Detector in Highway Mechanical and Electrical EngineeringX. Jia and W.Z. Ding 2015
Design of Alarm Controllers in Detection and Alarm Systems for GasesY. Zhao 2021
A New Approach to Improve the Probability of Detection of Eddy Current InspectionW.B. Zhang, S.L. Pan, P.J. Huang, D.B. Hou and G.X. Zhang 2026
The Applied Research of System Subtractive Clustering RBF Algorithm in Eddy CurrentTesting on the Conductive Structure DefectB.T. Liu, P.J. Huang and G.X. Zhang 2030
Quantitative Estimation with Lift-Off Effect in Conductive StructureH.Y. Tang, S.L. Pan, P.J. Huang, D.B. Hou and G.X. Zhang 2035
Research of Benzoyl Peroxide Residues in Flour by Terahertz Spectroscopy TechnologyL. Feng, J.H. Cai, G.X. Zhang, P.J. Huang and D.B. Hou 2039
Study on Fault-Tolerant Technique Based on Knowledge Modules of Hydraulic FaultTheoryT. Liu, J. Yu and W.J. Sun 2043
Overview of Ultrasound Imaging Algorithms Based on Synthetic Aperture FocusingTechniqueH.C. Sun, D.L. Zhang and S.K. Wu 2051
Research on the Fault Diagnosis System for ICMZ.N. Li and L. Zhou 2055
Analysis of Hydrostatic Guideway Error Based on Multi-Head PumpX.Y. Long, S.M. Yang, G.T. Yuan, J.L. Wang and Z.D. Jiang 2059
Safety Analyzed and Detection Test of Unexploded Subprojectiles by Means of some MetalDetectorJ.F. Cai, X.Z. Fu and J.Z. Yi 2065
The Research of Signal Processing in Ultrasonic Nondestructive Testing and EvaluationC.A. Ai, Q. Wang and Z.G. Xu 2069
Equipment/System Safety Design Process in Civil Aircraft Considering Structure-SupportRequirementsW.G. Shen, J.W. Han and X.T. Zhao 2076
Constant-Stress Accelerated Life Test with Competing Risks under Progressive Type-IIHybrid CensoringY.M. Shi, L. Jin, C. Wei and H.B. Yue 2080
Fault Prediction Based on Data FusionH.L. Tian, H.R. Li and B.H. Xu 2084
Study on Method of Reconnaissance Effect Simulation for Infrared Imaging EquipmentZ.D. Hu, T. Yang, X.M. Tang and C. Xiang 2089
Research of Nozzle Divergent Section Detection Based on Modal Flexibility CurvatureDifference MethodZ.G. Xu, J. Ma and Q. Wang 2095
Faults Diagnosis of Converter Transformer Based on the Vibration MethodH. Cui 2101
Chapter 19: Mechatronics
Research on the Electronic Differential Control Strategy of Electric VehicleC.G. Lu, M.S. Xu and C.Q. Li 2109
A High-Performance Digital Servo Driver for Magnetic Levitation Planar MotorL.G. Huo, Y.F. Zhou and G.D. Liu 2113
Design of the Vehicular Eletro-Optical Tracking Turntable Servo System and the Researchon its Tracking Control SchemeD. Ji, H.P. Wang, Q. Guo and Q. Lu 2119
Simulation Study on Jet Power Drive System of Quarter VehicleQ. Fu, X.L. Sun and M.X. Cai 2124
Advanced Materials Research Vols. 712-715 s
Comparing Study on Performance of Brushless Doubly-Fed Generator with Different RotorStructuresZ. Yue and F.X. Wang 2128
Optimization Analysis of Structure Parameters for External Rotor DSPM MotorH. Liu, W.J. Wang, L.B. Mao and Q. Dai 2133
The Research on the Ignition System of Engine Combustion BombX.B. Yi 2139
Research of the Tool Orientation Optimization with Kinematical ConstraintsH.J. Liu, J.Y. Cao and J.B. Zhao 2143
Digital Machining Simulation for Francis Hydro Turbine's BladeY.C. Yin and L. Wu 2149
Tool Path Generation for Local Interference Region Machining of Triangular Mesh ModelM. Yu, C.B. Huang, K.Y. Jiang and B. Liu 2154
Simulation Research on the Shift Schedule in the Auto with Automated ManualTransmission Based on Cruise Gear Shift ProgramH. Qin, S.X. Long and K. Yu 2160
Structural Design and Realization of Wheel-Legged Obstacle Crossing VehicleM.Y. Li and D.L. Guo 2164
Structure Design of Transmissive Switch-Zoom Infrared SystemsQ.L. Jia and L.W. Song 2169
Study of the Fuel Consumption of ECMS Applied to a HEVP. Sun, X.M. Yu, W. Dong and L. He 2173
Study on the Intelligent Control Technology for Wet Dual Clutch TransmissionP. Han, X.S. Cheng, Y.D. Song, Y.S. Wang and X. Liu 2179
Simulation and Analysis on Stationary Combination Valve of Heavy-Duty VehicleAutomatic TransmissionY. Zhang, W.X. Ma and W. Xu 2183
New Design of Reduction Device of Column Electric Power Steering SystemY.L. Wu, C.Q. Li and X.L. Dong 2188
Characteristics Analysis of Giant Magnetostrictive Actuator Applied in Jet-Pipe ServovalveY.S. Li and Y.C. Zhu 2192
Breaking Deceleration Control of Urban Rail Vehicle Based on Smith PredictorM.N. Zhang and H.Z. Xu 2196
MEMS Scanning Mirror with Vertical Comb Actuator Based on Latching TechniqueQ.H. Chen, Y.M. Li, Y.J. Chen and W.G. Wu 2202
Fast Response MEMS VOA with Grid-Type ShutterQ.H. Chen, Y.M. Li, Y.J. Chen and W.G. Wu 2206
1×6 Compound-Driven Optical MEMS Device for Multifunctional Fiber OpticCommunicationY.J. Chen, Y.M. Li, Q.H. Chen and W.G. Wu 2210
Genetic Algorithm Tuning PID Control of Magnetic Powder ClutchX.G. Wu, R.X. Liu and N.N. Ding 2216
The Research of High Reliability Secondary Power on Orbiting Carbon ObservatoryX.P. Wang, J. Wang, P. Yu, X.D. Qi, X.F. Li and Y. Wang 2223
Design and Implementation of the AMT Data Acquisition System Structure and FunctionY. Cheng, H.W. Zhao, S. Wang, W. Lv and T. Sun 2229
Research on the Real Time Simulation of HEV Motor Pre-Charge Using an EmbeddedControl SystemC. Dong and J. Li 2234
Chapter 20: Industrial Robots and Manipulators
Real-Time Forward Position Kinematics of the Spatial Parallel ManipulatorJ.W. Mi, L. Du and X.C. Duan 2241
Study on the Architecture and Motion Control of the Traverse RobotJ.H. Wu, T.D. Qin, J. Chen, K.Y. Lin, H.P. Si and C.B. Zhang 2249
t Advances in Manufacturing Science and Engineering
Design and Simulation Analysis of a Hybrid ManipulatorZ.Y. Xue, B. Zhang, J.X. Jia and D.B. Zhang 2255
Path Optimization of Spray Painting Robot for Zigzag Path PatternY. Zeng and X.H. Ni 2260
The Study on the Communication of the Multi-Robot Polishing System by the ACO ModeM. Yu, X. An and J. Ji 2264
Design and Development of the Trunk Spraying MachineJ. Liu, J. Tang and C. Yao 2268
Study of Co-Simulation of Rehabilitation Robot for Upper Limb Based on VirtualPrototypeZ. Lan, Z. Yan and J.J. Xu 2272
Proposal of Noncontact Operation Robotic Hand Using Permanent Magnetic SuspensionZ. Xu, F. Sun, J.J. Jin and K. Oka 2277
Study of Barrel Bending Measurement and Correcting Model with PSD and Gun BarrelRobotX.F. Meng and C.M. Wang 2281
Automatic Button Cell Sorting Manipulator System Research Based on Visual ServoControlL.Y. Sun, G.M. Yuan, J. Zhang, Z. Liu and L.X. Sun 2285
Forward and Inverse Kinematic of Continuum Robot for Search and RescueG.Z. Meng, G.M. Yuan, Z. Liu and J. Zhang 2290
An Internal Model Control (IMC) Algorithm for Automatic Trajectory TrackingS.M. Zhang, W.W. Deng, Y. Wang and B.X. Shang 2296
Realization of the Postprocessor of Intelligent Turning-Milling Combined Machining CellBased on UG NXN.Y. Shen, Z.X. Yu and J. Li 2303
Simulation and Optimization Design of the Transplanting ManipulatorG.H. Gao, H. Yang and K.C. Wei 2308
Research on Kinematic of the Wheel-Legged Robot Based on Uneven Road SurfaceP. Peng, X.J. Zhang, J. Zhang and Z. Liu 2312
Chapter 21: Image Processing and Machine Vision
Design and Implementation of the Cold-Rolled Aluminum Plate Surface On-Line DefectDetection SystemX.G. Qi, H.L. Zhang and X.T. Li 2323
Complex Paper Disease Detection Based on Probabilistic Hough TransformX.G. Qi, D.D. Dou and H.L. Zhang 2327
Investigation of Factors Influencing Calibration Accuracy of CameraJ.H. Wang, Y.P. Wu and Z. Yang 2331
Texture Feature Extraction for Color Images Based on Quaternion RepresentationC.B. Huang and Z.P. Zhou 2336
Mine Loadometer License Plate Recognition Based on MFF-DSX.C. Guo and S.Q. Zhang 2341
Study of Motion Detection Technology Based on Davinci PlatformS. Yuan, G.Y. Zhang, J.H. Wu and L.Y. Guo 2345
An Improved Suppressed FCM Algorithm for Image SegmentationH. Lan and S.B. Jin 2349
Moving Objects Detection and Speed Estimation in Intelligent Surveillance SystemZ.H. Xi and G.H. Dong 2354
Arabidopsis Growth Analysis Using Image Processing TechnologyQ.H. Ke, J.M. Zhang and Y. Tian 2359
An Approach to Detection of Solder Joints on Printed Circuit BoardsX.S. Tong 2364
Target Recognition Based on Polar Coordinate Template MatchingC. Yao and C.B. Xiu 2368
Advanced Materials Research Vols. 712-715 u
New Camera Parameters Calibration Method of Binocular Vision SystemH.E. Ren and S. Li 2372
The Application Research of Robot Vision Target Positioning Based on Static CameraCalibrationJ.Y. Yin 2378
Research on Solder Joints Quality Detection of Auto Parts Based on Biological VisionFeatureC. Lin, X.F. Lv, Y.J. Cao, J.H. Wei and C. Lin 2385
A Sequential Structure from Motion Algorithm for Static Scenes Based on VR-SimulationH.P. Wang, X.J. Li, T. Pan and K. Zhao 2389
Chapter 21: Image Processing and Machine Vision
Image Registration Method Based on PCA-SIFT Feature DetectionY.W. Wang and H.L. Yu 2395
Shot Cut Test Based on Mathematics Parameter and Chain CodeJ.F. Wang and X.R. Zhao 2399
Extraction Method of the Contrast Feature of Ship Wake ImagesM.R. Chen, W. Chi and L.G. Jin 2403
A New Gradual Segmentation Algorithm of Fingerprint ImageF. Wang and H.B. Cao 2407
Chapter 22: Intelligent Optimization Design and Algorithm
Local Piecewise-Linearity Prediction Method of Chaotic Time SeriesJ. Liu, X.W. Bai and D.C. Chi 2415
INS/GPS Integrated Navigation Method Based on Neural NetworkT.L. Xu 2419
A Resilient Particle Swarm Optimization Algorithm with Dynamically Changing InertiaWeightZ.D. Wu, S.H. Zhou, S.M. Feng and Z.J. Xiao 2423
Applications of Reservoir Sensitivity Prediction Based on Quantum Neural NetworksW. Zhang, J. Wang, J.B. Xie and F. Teng 2428
Study on Application of Fast Intrinsic Mode Decomposition to Short-Term LoadForecastingS.Z. Wang and X.Q. Fan 2432
Load Forecasting by Considering Wind Power Based on Sequential Time ClassificationLSSVM ModelC.J. Yang, A.H. Zhang, H.W. Lu, G. Wu, H.Y. Ma, X.F. Gao and M. Qin 2437
An Intelligent Algorithm Method of Element Layout Priority Sequence on Consoles HumanMachine InterfaceS.Y. Yan, Y. Chen and W.L. Chen 2441
A Hybrid Intelligence Algorithm for No-Wait Flow Shop SchedulingF. Wang, Y.Q. Rao and Q.H. Tang 2447
A User-Based Modeling and Analysis of Network Public Opinion UsingParticle Swarm OptimizationD.Y. Kan and R.X. Ma 2452
The Description and Characterization of Symmetric Frames and Gabor Frames andApplications in Material EngineeringQ.J. Chen, X.T. Lei and J.F. Zhou 2458
Semi-Orthogonal Parseval Wavelets Frames on Local Fields and Applications inManufacturing ScienceS.H. Wang 2464
Weight Determination Method Based on Principal Component Analysis CokingH.J. Chen and J.F. Bai 2469
v Advances in Manufacturing Science and Engineering
Large Subassembly Relocation for Finish Machining of Wing-Fuselage Joints in DigitalFinal Assembly of AircraftC.H. Liu 2474
Box Parts Manufacturability Evaluation Based on Feature ModelG.T. Zhang, F.P. Zhang, X.F. Duan, B. Gao and L.Y. Qin 2478
Assembly Sequence Planning Based on Connector Structure and Ant Colony AlgorithmY.Y. Su, H. Dong and D. Liang 2482
The Research of a Two-Directional Vector-Valued Quarternary Wavelet Packets andApplications in Material EngineeringJ.F. Zhou 2487
More Efficient Methods among Commonly Used Robust Estimation Methods for RobustUnitary Linear RegressionJ.J. Zhang and Y.H. Ge 2493
More Efficient Methods among Commonly Used Robust Estimation Methods for SimilarityTransformationY. Yuan and Y.H. Ge 2497
Chapter 23: Data Mining, Information Technologies and ComputerApplications in Industry
Research on Technology of Broadband Optical Fiber Access Network SystemZ. Li 2503
A Fast Connection Construction and Update AlgorithmF. Liu 2506
A Study on CIF-to-BMP Format Transformation AlgorithmJ.P. Wang, S.Y. Qi and D. Xu 2510
Physical Layer Security Solutions for High Speed Data NetworksZ.J. Mao, J.T. Wei, H.W. Li, Q. Wu and F.C. Qian 2514
An Empirical Study on Small Enterprises E-Commerce Adoption Decision Based on TAMModel & TOE FrameworkB. Shi 2521
Research on Jiangxi Tourism E-Commerce Site PlanningZ.Y. Zeng and J.B. Song 2525
A New SVM Multi-Class Classification Algorithm Based on Sample Scale and DistributionAreaY.P. Qin, P.D. Qin, S.X. Lun and Y. Wang 2529
Using Adaptive Scheme to Monitoring Dependent Steps with Attributes DataC.M. Yang, S.F. Yang and J.T. Yeh 2534
A GPU/CPU Programming Model for CFD SimulationC. Wei, Z.H. Wang and C.F. Xu 2538
JPEG DCT CompressiomH.L. Jia and Q. Liu 2542
Music Source Separation Based on Improved Sinusoidal ModelingS.P. Li, Q.S. Jiang and H.X. Chang 2546
The Search Technology of Query Expansion Based on the Agriculture InformationS.D. Zhang and J. Wang 2550
A Model of Replication Creation in Distributed NetworksJ. Li 2556
Design and Implementation of Online Answering SystemY.H. Mao and C.X. Chen 2560
Research on Method of Limit to Model Behavior Region in Virtual EnvironmentT. Pan, X.J. Li, H.P. Wang and B.R. Chen 2565
Genetic Algorithm for Panel Cutting Stock on CUDA PlatformW.W. Xie and T. Ning 2569
Research on Trees Static and Dynamic Modeling MethodF. Yang, S. Yu, T.N. Li and Y.B. Wang 2576
Advanced Materials Research Vols. 712-715 w
Research on Simulation of Syncretizing Remote Sensing Information Vegetation SceneX.J. Li, T. Pan, B.R. Chen and H.P. Wang 2580
Integral Modeling for Entity of Trees Based on 2.5DT.N. Li, S. Yu and F. Yang 2584
Design and Implementation of a On-Orbit Service Oriented Dynamic Simulation PlatformH. Yin, Y.M. Gao, C. Wang and X.B. Zhang 2588
Research on Modeling and Simulation of Networked Air & Missile DefenseZ. Zhu, N. Zhu, Y.L. Lei and Q. Li 2594
Study on the Economical Distribution of Load Based on the Lagrangian MultipliersX.H. Wan, J.G. Wang, Z.W. Dong and S.J. Zhang 2600
Chemical Reaction Optimization for Task Mapping in Heterogeneous EmbeddedMultiprocessor SystemsC. Xu and T. Li 2604
Power System Data Quality Evaluation Based on the Analytic Hierarchy ProcessX.L. Wang, X. Qin, D.X. Liu, Z.J. Wang, J. Wang, H.M. Xu and M. Qin 2611
A Digital Filtering Approach in Measurement and Control SystemC.H. Li, Y.T. Yu, S.L. Song and Y.C. Liu 2615
Research of the Finding Technology of Invocation Model and Data Model of TestingSystems Based on TTCN-3X.M. Liu, Y.P. Liu, S.M. Liu and L.Y. Su 2619
Study of Connecting Rod Cracking Production Line Layout Planning System Based onVB6.0H.P. Gao, H.J. Wang, Z.W. Zhang and Q.D. Yang 2625
Furnace Data Management System Based on WinCC User ArchiveD. Shao, H.T. Liu and H.Y. Chen 2631
Small Fluctuations Research of Internet AS-Level Topology Based on PFP ModelB. Yang, H. Zhao, J. Zhang, S.Y. Jia, Y.W. Liu and W. Liu 2635
Research on the Cloud Manufacturing Service Discovery for Industry ManufacturingSystem Based on OntologyC. Yang and Z.J. Wang 2639
Supervisory Information System Application in Power PlantX.L. Luo and Q.D. Liang 2644
On an Improved SPRINT Data Stream Online Classification AlgorithmH. Zhou, C.Y. Fu, J.M. Xue, Y. Zhi and J.S. Liu 2648
Availability Allocation for Distributed Clusters of the Cloud InfrastructureJ. Ding, P. Lin and L.P. Zhu 2653
Personalization Information Retrieval Based on Topic DirectoryY.X. Yu and Y.Z. Zhang 2659
Complementary QoS Strategy Research and Application in Large-Scale Switched NetworksJ.F. Jiang, J.F. Jiang, X. Zhang and J.X. Sun 2664
Based on TSIP Protocol GPS Data Decoding AlgorithmS.G. Sui, C.G. Liu and H.B. Gao 2671
User Classification Prediction Research Based on Clustering SVMJ. Wang, Y.Y. Zhang and S.H. Guo 2676
The Most Preferred Route of the Car Navigation System: A Systems Engineering ApproachK.I. Choe 2680
Analysis and Design of Intelligent Assessment System for Supplier Service QualityL.J. Wang 2686
Application of Change Control Technology in Weapon Equipment Software ConfigurationManagementC.F. Zheng, L.Q. Jiang and Z.J. Wu 2692
The Interface Design of the Voice System Based on the TLV320AIC23 and CPLDL.L. Zhao, Z.G. Di and C.R. Jia 2697
Design of Data Acquisition System Based on PXI Bus and VC++2008Z.G. Ma and W.Y. Liu 2702
An Information Retrieval System Based on Portable DeviceX.Q. Yu, W.G. Wang, J.H. Shi and Y.H. Wang 2706
x Advances in Manufacturing Science and Engineering
Haptic Data Compression Based on Linear PredictionF.H. Guo 2712
FRFT Based Method to Estimate DOA for Wideband SignalW. Yang and Y.W. Shi 2716
Reliability Analysis and Design of Facility Systems Based on Edge Failures: A ReviewZ.T. Wei 2721
EEG-Based Music Mood Analysis and ApplicationsX. Xu, H. Guan, Z. Liu and B.J. Wang 2726
Chapter 24: Control and Automation in Manufacturing
Design of Nut Machine Vision Inspection and Screening Systems Based on PCZ.A. Yu, C.L. Wang, P.Y. Guo and K. Kan 2733
Design of Optimum Controller of APT Fine Tracking Control SystemM.Q. Li and S.H. Jiang 2738
Design of Cemented Carbide Face Automation Grinder Based on Constant Force Grindingand Online Measurement TechnologyT.C. Zhang 2742
The Design for High-Power Maglev Blower ControllerW.T. Yu, H.W. Li, S.Q. Liu and Y.P. Zhang 2747
The Application of Bluetooth in the Control System of the Smart Home with Internet ofThingsX.F. Zhao 2753
The Implementation of Permanent Magnet Synchronous Motor Direct Torque ControlJ.L. Zhang, Y.R. Li, L.F. Fu and F. Gao 2757
Research on Model Reference Robust Control for Multivariable Linear SystemX. Jiang, J.Y. Hua and Q.L. Zhang 2761
Robust Adaptive NN Design for Course-Tracking Control of Ship with Input SaturationH.Y. Sun and F.W. Yu 2768
Monitoring and Management of Control System for Concrete Mixing StationS.J. Zhang, W.M. Xu and M.Z. Zhang 2775
Design of Control System for Concrete Mixing StationS.J. Zhang, Y.D. Jiang and M.Z. Zhang 2779
Back-Stepping Adaptive Attitude Control of Over-Actuated SpacecraftH. Fang and J.H. Gong 2783
Study of Variable Structure Control Based on SVMQ.Z. Song and X.Y. Meng 2787
Adaptive Feedback Control for a Class of Discrete Chaotic SystemsF.F. Zhang, J. Xing and H.W. Zhao 2791
Spray Experiment Control System Design of Exhaust Gas Desulfurization Based on PLCZ.F. Dong, B. Li, H.J. Yang, X. Yang and R. Yao 2799
Design of Real Time Monitoring System in Urban Pipeline Networks Based on WirelessCommunicationX.M. Gao and Y.C. Chen 2803
DR Model Based Network Control System Design and Analysis with Time Delay and DataPacket DropoutJ. Tang 2807
Research and Application of Intelligent Control in Ceramic Kiln TemperatureL.P. Dai, H.Y. Liu and X.L. Chen 2811
Temperature Control in Brazing Furnace Based on B-Spline Fuzzy Neural NetworkQ.G. Yu 2816
The Design of Remote Real-Time Intelligent Monitoring System Based on ARM and DSPfor Precision Grinding MachineQ. Liu, D.X. Zhang, Q.H. Tang, Z.S. Wang and Y.B. Guo 2821
Simulation and Analysis of the Anti-Sway Control of Crane Ship Based on Adams andMatlab Co-SimulationH.L. Ren, L. Fu, P. Li and C.C. Gao 2826
Advanced Materials Research Vols. 712-715 y
Research of Approach for Fuel Transfer Integrative Control of Offshore Oil PlatformPower SystemY.J. Qiao, Y.Q. Wang and Z.P. Xu 2831
Design of Simulating Control System on Marine Oily Water SeparatorJ.G. Jin, Z.T. Wang and L.B. Li 2836
Application of PLC in the Control System of Fins-FormerB. Zhou and H.B. Jiang 2840
Chapter 25: Industrial Design and Product Design: Theory and Practice
Exploration of Offbeat Funny Design on Daily Ceramic ProductsJ.X. Cheng and J.F. Huang 2847
Material Analysis on Oil well Wellhead Assembly and Application in Thermal ProductionwellL.F. Li 2852
Maturity Management Strategy for Product Collaborative DesignM. Chen and J.F. Liu 2856
The Application of Form Symbols in Furniture DesignZ.Y. Lv 2861
Psychoacoustic Properties Analysis on Interior Noise of High-Speed TrainsL.F. Yang, F.Y. Meng and B. Kang 2865
Case Study on Improving Energy Efficiency of Garment Materials by Women's Wear StyleTransformation DesignW.Z. Wang, C.G. Zheng, L. Sun, S. Wang, M.Q. Wang and W.Z. Wang 2870
Study on Simulation and Design of Fitness Entertainment Machine Based on theFischertechnik Model and UG, ANSYSS.Y. Hao, T.T. Yang and L. Wu 2874
Incorporating Ergonomics Evaluation in Assembly and Disassembly of Repetitive Task:Focusing on Load TaskS.Z. Md Dawal, R.A. Raja Ghazilla, H.R. Zadry, M. Widia and N.S. Abdullah 2879
Study on Industrial Design Method for Product Life CycleJ. Hu and D. Jiang 2884
Process Control Method of Complex Product Multidisciplinary Collaborative DesignSystemH.Q. Liu and M. Lv 2888
Disassembly Evaluation Based on Principal Component AnalysisN. Zhao, R. Mu and W.W. Wang 2894
The Study of Material Texture Image Model by Kansei EngineeringY. Zhou, R.Y. Tang and P. Yang 2900
A New Design of a Hydraulic Steel Radial Gate with Two Oblique Arms by TopologyOptimizationK. Cai, H.Y. He, X.H. Li and Y. Li 2906
Design of Fixture Systems in Automotive Manufacturing and AssemblyM. Ansaloni, E. Bonazzi, F. Leali, M. Pellicciari and G. Berselli 2913
The Research of Product Concept Feature Modeling Based on Energy SavingH.S. Zang, Q.C. Sun, J.L. Wu and C.L. Wang 2917
Emotional Design of Modern Products ReflectC.Q. Yang 2925
Emotional Design Study on Soy-Milk GrinderM.Y. Zhou, Y.Q. Liu and J. Wu 2929
Slip Resistance of Floors in a SupermarketK.W. Li, C.C. Chen, L.W. Liu and C.Y. Chen 2936
An Evolutionary Game Study on the Sustainable Product Development in RemanufacturingX.L. Zong 2940
Development of a Virtual Prototype of Surmounting Transport Vehicles Based onSolidworksX.C. Wang 2944
z Advances in Manufacturing Science and Engineering
The Transform of the Elements of Inspiration in Machinery Innovation DesignY.N. Guo 2948
The Color Research of Pharmacy Machine Based on Kansei EngineeringS. Yan 2952
User Knowledge Acquisition Research for Automotive DesignX. Yao, H.Y. Hu and J.Y. Li 2956
Research on Automotive Design Chain InnovationX.F. Huang and J.Q. Zheng 2961
Optimization Design of Automatic Transplanting Machine Based on TRIZG.H. Gao, K.C. Wei, H. Yang and Y. Liu 2966
Modularization Analysis Approach of Product Family for DFMC Based on ComplexNetworkB.B. Fan 2970
Chapter 26: Transportation and Logistics
Prediction of Traffic Volume in Highway Tunnel Group Region Based on Grey MarkovModelW. Zhan, Q. Lu and Y.Q. Shang 2981
The Evaluation and Analysis on Port Service Development — as Ningbo and Shanghai Portfor ExampleD.L. Zou, M. Xu and C.J. Zheng 2986
The Design of Cigarette WMS Based on RFIDM. Liu, Y.H. Feng, G.L. Zhong and G.J. Du 2991
Development of RFID Cigarette Pallet Warehouse SystemG.L. Zhong, Y.H. Feng and M. Liu 2995
China's Railway Transportation Network Christopher ResearchG.Y. Lv, J.Q. Zhou and W.L. Bian 3001
A Modular Framework for a Bus Monitoring & Passenger Notification SystemA.A.A. Salih, A. Zhahir and M.T. Ahmad 3006
Research on the Capability Evaluation of the Emergency Logistics Center Based onLinguistic VariablesX.L. Zhang and T.T. Nie 3015
Chapter 27: Green Supply Chain, Energy Saving and Low Carbon
Research on Sustainable Energy Development Strategy and Low Carbon RelationshipX.D. Peng 3023
The Application of Information Technology in Green Supply ChainQ. Yu and L.L. Liu 3027
Green Supply Chain Network Equilibrium Model with Genetic AlgorithmJ.L. Jiang, Y. Zhou, J.J. Wang and R.J. Han 3031
Financial Subsidies and their Effects on Environment-Friendly Products Supply in GreenSupply ChainF.M. Hou 3038
Diagnosis Method and Empirical Study of Supply Chain Performance Based on BayesianNetworkC.H. Zhang, N. Zhao, Z.W. Niu and W. Guo 3044
The Carbon Sink Estimation and Carbon Sink Increase Potential of Jiangmen, ChinaQ.J. Zhang 3049
Multi-Agent Applied Research in Agile Supply ChainJ.P. Tang and L.L. Li 3059
Value Analysis on Inventory Information Sharing in Supply ChainL.X. Zhou, T.J. Li and S.Y. Li 3063
Study on the Allocation of Carbon Emissions Based on the Supply Chain Profit DistributionG.J. Ji and Y. Zhao 3067
Advanced Materials Research Vols. 712-715 aa
Analysis of the Main Technical Ways of Automobile Energy SavingX.J. Wang 3072
Chapter 28: Organization of Production and Engineering Management
Manufacturing Resources Optimization Operation for Iron and Steel Enterprise Based onGreen ManufacturingZ.P. He, H. Zhang, Y.H. Wang, Z.G. Jiang and W. Yan 3079
Service-Oriented Manufacturing Agility and Application Based FlexibilityX.G. Xu, X.F. Li and Y.F. Wang 3085
Workforce Flexibility Optimization in Chemical Plant Construction ProcessX.G. Xu, Y.F. Wang and X.F. Li 3093
Secret of Chinese Manufacturing Innovation: An Analysis of SME Sustaining CompetitiveAdvantageX. Xin and J.N. Bao 3101
Research on Emergency Disposal Platform Based on Multi-Agent with a Cooperative ModelQ.F. Xiao, Y. Wang and Y. Wang 3106
The Construction, Existing Problems and Countermeasures of Germanium EcologicalChain in YunnanF.C. Li 3112
The Layout Optimization of the Multi-Sized Operating Units in the Facility Based on SpaceUtilizationJ. Li 3117
Establishment about Short-Term Demand Predictive Model of Automobile — Based onExtensive Correlation Evaluation and Continuous Time ModelT. Chen, Z.M. Zhu and T.M. Shen 3123
Training Mode Design of ESP Teachers in Universities of Science and EngineeringK. Chen 3129
Research on the Equipment Manufacturing Industry's Interregional Industrial Linkages inthe Bohai Sea RegionF. Pian, Y.P. Jiang and W.X. Luan 3133
Dynamic Efficiency Analysis of Coastal Container Terminal Enterprises in ChinaD. Li and W.X. Luan 3139
Empirical Research on the Science and Technology Project Ex-Post Evaluation IndexSystemW. Jia and D.Y. Cao 3144
A Study on Patent Storage Problems of Cooperation between Small and Micro Businessesand Universities in the Triple Helix of University-Industry-Government Relations — Basedon Economic Order Quantity ModelP.Y. Tang and S.B. Su 3149
A Methodology Based on Resource Elements for Equipment Capability Analysis OrientedVirtual Cellular Manufacturing SystemsW.M. Han, Y. Chen and J.L. Zhao 3153
Uncertainty Spread and Control of Complex Supply Chain Networks in ManufacturingIndustryX.H. Qin, B.N. Luo and J.Q. Gong 3161
The Risk Management Method for Project Schedule of Aerospace EngineeringC.H. Wang and J. Lu 3165
Study on Examination Reform of Specialized English for Seafarers on International ShipsT. Wang 3169
Influence of Intellectual Capital on Technical Innovation Performance of ClusteredManufacturing EnterprisesW.J. Jiang and Y.R. Zhang 3173
Simulations on the Spare Parts Inventory Management of Equipment Maintenance inManufacturing Enterprise Based on FlexsimX. Sun 3181
Developing Automated Production Management System for Manufacturing Green itProductsS.O. Shim 3187
bb Advances in Manufacturing Science and Engineering
A Framework for Implementing Social Manufacturing System Based on CustomizedCommunity Space Configuration and OrganizationK. Ding, P.Y. Jiang and X. Zhang 3191
On Characteristics and Development Trend of Advanced Manufacturing TechnologyH.Y. Wang and L.J. Diao 3195
Research on the Destructive Leadership in Virtual EnterprisesX.L. Wen 3199
Application of PDCA-Cycle on the Management of Critical Values ReportingH. Wang, Y. Chang and W.S. Che 3203
An Application of GMM Method in the Test of Relationship between Urbanization andCirculation Economic GrowthY.X. Liu and Z.B. Zhang 3207
Application of Elman Neural Network with HP Filter in the Trend Supply of Self-ProvidedPower Plant Forecasting in the Iron and Steel IndustryH.J. Li, J.J. Wang, H. Wang and H. Meng 3211