1.800.350.4127

www.BNind.com

TABLES ANDPEDESTALS

23"18 1/2"

20"

23"17 3/8"

28"

57"25"

32"

45"25"

16"

36"

16" 23"

51"25"

24"

This page: Medium Nesting Pedestal with clear Acrylic Slats.

Opposite page: Small Nesting Table with two Medium Nesting Pedestals. All with Maple Ply slats.

Small Nesting Pedestal 370510 $ 1,100.00

Medium Nesting Pedestal 370511 $ 1,125.00

Large Nesting Pedestal 370512 $ 1,150.00

Small Nesting Table 370513 $ 2,400.00

Medium Nesting Table 370514 $ 2,700.00

Large Nesting Table 370515 $ 3,000.00

Brushed stainless steel frame with tops made from slats of acrylic or Maple Ply. Tables ship flat-packed. Customer Assembly. All Samba Tables are made-to-order.

Samba Tables

8 0 0 3 5 0 4 1 2 7 32 www.BNind.com

Losenge Table

30" 14"

14" 14"

14" 14"

14" 14"

28"

30" 60"

9"

60"32"

30"

Bench 380010 $ 550.00

Small Table 380011 $400.00

Tall Table 380012 $ 475.00

Large Table 380014 $ 1,450.00

Platform Table 380013 $ 1,100.00

Here, two benches with custom white Sintra tops, and a Platform Table with a custom bamboo veneer.

Here, the entire collection with custom white Sintra tops.

Brushed stainless steel metal frame with acrylic tops. All Losenge Tables are made-to-order.

4 www.BNind.com 8 0 0 3 5 0 4 1 2 7 5

Three-In-One Table

60" 36"

60" 36"

60" 36"

15 5/8”" 15 5/8”"29 5/8" 29 5/8" 35" 5/8” 35" 5/8”

16"

30" 36”

60" 36"

60" 36"

60" 36"

15 5/8”" 15 5/8”"29 5/8" 29 5/8" 35" 5/8” 35" 5/8”

16"

30" 36”

60" 36"

60" 36"

60" 36"

15 5/8”" 15 5/8”"29 5/8" 29 5/8" 35" 5/8” 35" 5/8”

16"

30" 36”

Three-in-One Table 35 5/8" x 15 5/8" x 29 5/8" wire frame can be positioned 3 different ways to create different height tables. 5/8" Dia. brushed stainless steel frame with 36" x 60" x 3/8" clear tempered glass top. 371463 $ 500.00

One table, three configurations. All Tables are made-to-order.

8 0 0 3 5 0 4 1 2 7 76 www.BNind.com

Saw-Horse TableAn adjustable table with a single wood veneer top, or three-tier wood veneer tops. Legs adjust from 29" to 40". Legs Sets are sold separately from Table Top and Shelf Sets. Saw-Horse Leg Sets are in stock, wood tops and Shelf Sets are made-to-order.

Saw-Horse Table Leg Set (set of 2) Polished Stainless SteelW 26 1/2" D 13 3/4"x 29" H 40"581719 $ 475.00

80"30"

21"

40"max

height 26 1/2"

9 1/2"

1 1/8"

3/4"

3/4"

80"30"

29 3/4"(adjustable)

1 1/8"

Single Wood Table Top for Saw-Horse TableW 80" D 30" T 1 1/8"581786 - Stock Laminate $ 450.00

80"30"

21"

40"max

height 26 1/2"

9 1/2"

1 1/8"

3/4"

3/4"

80"30"

29 3/4"(adjustable)

1 1/8"

Lower Shelf Set for Saw-Horse TableW 65" D 21" T 3/4"581785 - Stock Laminate $ 400.00

Above Left: A Saw-Horse Table Leg Set with a Single Wood Table Top.

Below Left: A Saw-Horse Table Leg Set with a Single Wood Table Top and one of the shelves from The Lower Shelf Set for Saw-Horse Table.

Right: A closeup of the adjusting pin on the polished stainless steel leg. Legs adjust from 29" to 40" high.

8 www.BNind.com 8 0 0 3 5 0 4 1 2 7 9

Pedestal with 9" Square Tray Top Material: 3/4" mdf with formed laminate, see "Stock Vinyl Colors" on page 20.400597 - color code Call for Price

Pedestal with 15" Round Acrylic Top Top Material: 3/8" Acrylic400595 - color code Call for Price

Pedestal with 9" Square Acrylic Top Top Material: 3/8" Acrylic400596 - color code Call for Price

Pedestal with 9" Square Clear Acrylic Box Top Material: Clear Acrylic. Box has sliding door.400598 - 500 Call for Price

Adjustable PedestalsA collection of different display tops with brushed stainless steel bases with an adjustable brushed stainless steel stem. Stems extend from 24" to 40".

Iconic Café Table Tops with Clear Glass Tops

Call for Prices

36" x 36" square430562 - pattern-color

30" Dia.430563 - pattern-color

24" Dia.430564 - pattern-color

Stainless Table Bases

28"h square base430567 $ 350.00

15.75" round x 28"h base430568 $ 375.00

21.25" round x 28"h base430569 $ 400.00

Iconic Café Tables Patterns Albert -9011Helsinki -9003Palm Springs -9006 Iconic Café Tables ColorsGloss Black -905Gloss White -901

Iconic Café TablesCarved MDF with formed laminate tops that match Iconic Panels. Clear glass tops on top of the Café Table Top for dust and scratch control. Stainless Steel Bases are sold separately from the Table Tops. Tables come in the three patterns below, and in Gloss White or Gloss Black. Table heights are 29". All Iconic Café Tables are made-to-order.

Albert Tops

Helsinki Tops

Palm Springs Tops

36 in

36 in 24 in30 in

36 in

36 in 24 in30 in

36 in

36 in 24 in30 in

30 in

16 in 17 in

33 in18 in

36 in

36 in 24 in30 in

36 in

36 in 24 in30 in

36 in

36 in 24 in30 in

30 in

16 in 17 in

33 in18 in

From Left to Right: Café Tables with Glass Tops, 30" Dia., 36" x 36" and 24" Dia., in Gloss White Helsinki and Stainless Table Bases.

8 0 0 3 5 0 4 1 2 7 1110 www.BNind.com

Butler Tables have always been a mainstay in residential applications. We have now blown the scale up and have created a wonderful table for retail applications.Butler Tables are highly versatile, and are easily set up and taken down. Our stock offerings have trays as tops, but feel free to pair the base with a glass or wood top as well. Butler Tables are available in the materials listed below. B&N is offering an extremely durable vinyl laminate, acrylic, and high grade leather-like vinyls that perfectly mimic Buffalo, Crocodile, and Shagreen. All Butler Tables are made-to-order.

Butler Table Laminates, Finishes, and Faux Leathers

White Gloss Acrylic-591

Black Gloss Acrylic -592

White Gloss Vinyl -901

Black Gloss Vinyl -905

Maple Vinyl -908

Walnut Vinyl -909

Red Gloss Acrylic-525

Black Buffalo-614

Brown Buffalo-613

Tan Buffalo-603

Black Croc -607

Brown Croc -609

Tan Croc -611

Shagreen -605

3.5"

3.5"

36" Ø 0.D.

2.5" INT. DEPTH

40" 24"

24"

29.2

5"

24"

13.6

875"27"

19.8

75"

NOTE: The RoundTop can not be used at thelowest Base setting

17.125"

20.5"

23.75"

27.125"

30.5"

19.25" 28.75"

ROUND TOP

RECTANGULAR TOP

ALL TABLES SHOWN WITH RECTANGULAR TOP, WITH THE 40"SIDE VIEWED

2.5" INT. DEPTH

41.5

"

35.7

5"

TOPS TALL BASE LOW BASE

Item Numbers and Pricing

Mirror- Polished Stainless Steel

Vinyl Laminate Acrylic Faux Leather

Tall Base 582126-011 $257.00

Low Base 582125-011 $257.00

Round Top Not Available 582130 $285.00 582128 $266.00

Rectangular Top 582129 $294.00 582131 $228.00 582127 $226.00

Butler Tables

12 www.BNind.com 8 0 0 3 5 0 4 1 2 7 13

23.75"

17.5"

LEVELERS ON BOTTOM OF ALL TABLES

30"

30"

17.75"

30"

OPEN ALL THE WAY THROUGH23.875"

6"

6"

60"Bold and architectural, the Cantilever Sliding Tables virtually float off each other, making a strong impression for merchandising. With the ability to adjust horizontally in various positions, using each table beneath the other for support, these tables offer a customizable solution for many kinds of merchandise. While the tables are only sold as a set of three, they promise to make a statement and focal point to the entrance of any department, down the middle of an aisle, or at the top of escalators. Shown here in custom orange laminate. See page 20 for color and material choices. All Cantilever Tables are made-to-order.

Cantilever Tables

Cantilever TablesTotal size when nested together: W 60" D 30" H 30" 582250 - stock laminate $ 4,100.00

Bold, architectural nesting tables that can be positioned in either direction horizontally, each one resting on the other for support. Here, just a few of the multitude of configurations of the Cantilever Tables, shown here in a custom orange laminate.

8 0 0 3 5 0 4 1 2 7 1514 www.BNind.com

Graphic Cube|Pedestals are display and merchandising cubes which have the ability to hold graphics on any, or all, of the four sides. The frame is constructed from brushed stainless steel, and has channels which allow graphics to be easily slipped into place. Levelers on the bottom ensure they stay balanced on uneven floor surfaces. The top is made from a solid piece of brushed stainless steel, and registers into place on top of the frame. It creates a perfect spot for highlighting product, and can hold up to 80 pounds (on the 22" high version) and 60 pounds (on the 30" high version). Graphic Cube|Pedestals can also be used without graphics for an open and light contrast to a Cube|Pedestal with full graphics. With several combined together, they produce a strong, impactful display, and provide easy adaptation for seasonal messaging or new promotions.

Graphic Cube|Pedestals

21 7/8"20 7/8"VISIBLE

14"

14"

29 7/8" 28 7/8"VISiBLE

21 7/8"20 7/8"VISIBLE

14"

14"

29 7/8" 28 7/8"VISiBLE

22" High Graphic Cube|PedestalBrushed stainless steel 1/2" square profile with slots to accept 1/8" customer-supplied graphics. Top is 3/32"-thick brushed stainless steel, with a locating route on bottom to sit squarely on top of the frame. Tops are sturdy enough to hold up to 80 pounds of product. Graphic Cube|Pedestals can be used with or without graphics.

21 7/8" H x 14" square 320001 $ 236.00Customer produced graphic size:12 15/16" x 21" x 1/8"

30" High Graphic Cube|Pedestal Brushed stainless steel 1/2" square profile with slots to accept 1/8" customer-supplied graphics. Top is 3/32"-thick brushed stainless steel, and locks in squarely on top of the frame. Tops are sturdy enough to hold up to 60 pounds of product. Graphic Cube|Pedestals can be used with or without graphics. 29 7/8" H x 14" square320002 $ 256.00 Customer produced graphic size:12 15/16" x 29" x 1/8"

Note: mirror-polished stainless steel and Powder Coat frame versions available.

Illuminated versions are also available for your specific requirement, either fluorescent or color-changing LED lighting.

Contact your sales representative for more information.

Above left, a drawing shows how the graphics slip into the side panels. Graphics are customer-provided, and should be produced to a 1/8" thickness, which will hold securely in the channel. Above right, the sizes of the two Graphic Cube|Pedestals.

16 www.BNind.com 8 0 0 3 5 0 4 1 2 7 17

Light Platforms are modular, internally-illuminated display boxes that can connect together, or be used individually. The simple, open style legs are polished stainless steel (available also in gloss white powder coat). The legs have two sets of mounting holes which allow them to share two Light Platforms, or be moved inward for a single Light Platform. Light Platforms can be ordered with either fluorescent bulbs, which can be easily changed by lifting the top, or with programmable color-changing LED's. Fluorescent Light Platforms “daisy chain” their power feeds through a hole in the bottom, so that there is only one cord to plug in. Color-changing LED Light Platforms have individual power feeds. Light Platforms are 23 3/4" square white acrylic, and offered in two heights: 9" and 12" (including legs). Using various heights along a run adds interest to a long display. Please note that Light Platforms are for display only, and can support up to 75 lbs. Never stand on them, as they are not designed to support the full weight of a person.

Light Platforms

These pages: three 6" Light Platforms (9" overall height with legs) and one 9" (12" overall height with legs) Light Platforms create a long run by sharing the same legs between them. The run is powered from one Power Cord with a switch that can feed from any box, and three Daisy Chain Cords to connect the lights together.

A single Light Platform shows how the legs are assembled to be flush with all edges. The above single Light Platform includes: one 9" Fluorescent Light Platform Box, two Light Platform Legs in Polished Stainless Steel, and one 6' Power Cord / Switch. Total cost for the above setup: $ 520.00

6" H x 23 3/4" square box 9" H x 23 3/4" square box 3" H single leg

White Fluorescent Light Platform BoxesWhite acrylic box with white MDF bottom, (2) 20" 18 watt fluorescent lamps.Includes a 6' Power Cord / Switch. Legs not included.

6" H x 23 3/4" square 420084 $ 350.00

9" H x 23 3/4" square 420085 $ 380.00

4' Fluorescent Daisy Chain 420087 $ 5.00 Fluorescent Replacement Bulbs371530 (ea) $ 12.00

Color-Changing LED Light Platform Boxes Colors can be set to cycle through Blue, Purple, Pink, Red, Orange, Yellow, Green, Aqua and White (all colors of the RGB spectrum), or hold on any color. Each Box contains (4) 20" LED Light Bars. LED Light Platform can be set to cycle through colors, or to set to the same color.LED Light Platform Boxes come with a 10' Power Cord, Floor Switch,and Color Controller Box. Legs not included.

6" H x 23 3/4" square 420092 $ 525.00 9" H x 23 3/4" square 420093 $ 555.00

LED Replacement Bars420088 (ea) $ 35.00 6' LED Daisy Chain420087 (ea) $ 15.00

Light Platform Legs3"H x 23 3/4" with (2) sets of mounting holes. Legs are sold individually. Mounting hardware included. Polished Stainless Steel420089-011 (ea) $ 70.00 Gloss White Powder coat420089-102 (ea) $ 70.00

8 0 0 3 5 0 4 1 2 7 1918 www.BNind.com

20 www.BNind.com 8 0 0 3 5 0 4 1 2 7 21

Terms And ConditionsQUOTE BY PHONE

1-800-350-4127(Outside Northern California)1-650-593-4127 (Northern California)

QUOTE/ORDERING BY E-MAILMAIL@BNIND.COM(Ready 24 hours a day)

CUSTOMER SERVICECustomer service is available 8:00 am to 5:00 pm (PST) Mon. – Thurs. and 8:00 am to 12:00 pm on Fri. to answer your inquiries regarding products, quotes or orders.

WARRANTYWe fully support the quality of our product. If there are any manufacturing defects, please contact our Customer Service Department by phone or e-mail for assistance.

PRODUCT WARRANTY LIMITATIONSThe Customer is purchasing the fixtures in an “as-is” condition, unless otherwise reported to the Company pursuant to [the inspection provision in the contract], as of the date of delivery and specifically and expressly without any warranties, representations or guarantees, either expressed or implied, except as set forth below, as to its condition, fitness for any particular purpose, merchantability, or any other warranty of any kind, nature or type whatsoever from or on behalf of the seller.

The Company hereby warrants to the Customer and its successors and assigns that the product supplied to the Customer is constructed only for the use and purposes contemplated by the Customer set forth in the contract; and the Company, immediately prior to the delivery of the product had good and lawful right to sell the product, and that there is hereby conveyed to the Customer on the date of delivery, good title to the product, free and clear of all liens, claims, encumbrances and rights of others.

WEBSITE / PRINTED MATERIALSThe copy has been reviewed to present information as accurately as possible. If an error is found in description, or the item has been discontinued, yet not updated, B+N reserves the right to correct it at the time it was discovered. PRODUCT OFFERINGS AND MATERIAL FINISHES ARE SUBJECT TO CHANGE AT ANY TIME.

ORDER SHIPMENTS ESTIMATESOrders in stock will ship via ground in 2 - 5 days, unless another service level is requested by the customer.

BACK ORDERSUnless otherwise noted, back orders will ship when they are back in stock at our facility. Your Sales Administrator will keep you advised on the status of all back orders. BLANKET ORDERSBlanket orders are subject to a unique set of Terms & Conditions defined at the time of order placement.

CANCELLATION AND RETURN ITEMS1. Stock items must be returned within 30 days, in re-sellable condition. Return of stock items may incur a 25% re-stocking fee. Freight charges on returns are the customer’s responsibility. A return authorization is required for all returns. Items returned without the proper authorization will not be accepted. B+N assumes no liability for customer returns which arrive damaged due to shipment transportation.2. Non-stock items purchased may not be returned.

FREIGHT AND MULTIPLE SHIPMENTS1. The following will result in additional charges unless otherwise stated on your quotation:- Shipments to multiple destinations.- Customer requesting custom packaging (includes breakout into multiple packages) and shipped to one location.2. Collect or 3rd Party Billing shipments are the responsibility of the freight payer.3. Freight quotations are subject to re-quote at the time the order is placed or if shipment is delayed.4. Customer is responsible to arrange and pay for International freight, as quotes are for transportation only. Freight quotes provided by B&N do not include the broker, customs duties, fees or taxes. That is the responsibility of the customer to obtain and pay directly to the source. Broker information must be provided prior to shipping.5. Weights and measurements may change due to changes in suppliers and/or packaging.6. B&N is unable to guarantee delivery times or dates. Delivery times and dates are the responsibility of the shipping agent.7. Regarding split shipments: On occasion, an order may ship from multiple locations based on availability.

PRODUCT DISCREPANCIES AND DAMAGES VIA SHIPMENT 1. Customer must inspect items upon delivery for damage or discrepancy.2. B+N accepts no liability for damage incurred during shipping. Any damage found at time of delivery must be noted by customer on delivery receipt and signed/initialed by driver. Customer is to retain all packaging with damaged items for an on-site inspection by carrier.3. For damage on 3rd party or collect shipments, the customer is responsible for filing the claim with the carrier for financial reimbursement.4. If any product arrives in damaged condition, a freight claim must be filed with the delivering carrier. Retain packing material and note on the Bill of Lading “DAMAGED”. Our Customer Service Department will assist you with any questions regarding filing a freight claim.5. All claims regarding shortages and freight damages must be presented WITHIN 7 DAYS of receiving the shipment.

PAYMENT METHODS AND TERMS1. We accept VISA, MASTERCARD, AMERICAN EXPRESS AND COMPANY CHECKS.2. Payment is due in full prior to shipping of product for all PREPAID ACCOUNTS. We do not ship COD. For payments made by check or bank transfer, the order will be processed upon receipt and approval of check or receipt of funds. 3. Consideration for establishing terms requires a minimum order amount of $5,000.4. Approved repeat customers may qualify for NET 15 day terms. A credit application must be completed with the necessary references. Please allow 2-3 weeks for processing. Once credit is approved, a 50% deposit is required on the initial order and future orders will be evaluated for deposit requirements. All custom orders will continue to require a 50% deposit.

SALES TAX1. Orders delivered within California and New York are taxable, unless a valid CA or NY resale card is presented prior to shipping the order.2. Taxable orders paid for by the customer and stocked at our California facility are taxed at the current rate for San Mateo County.3. Orders from resellers located outside California and New York that are drop-shipped to their customer within California and New York are subject to sales tax, unless we have received a valid California, or New York resale card from the purchaser or their representative.

PROTOTYPES, DRAWINGS, TOOLING, AND FIXTURES1. Drawings provided by B+N are the exclusive property of B+N Industries, Inc.2. Prototypes made from drawings that are not detailed and approved by B+N Industries, Inc., or have been supplied via verbal instruction from the customer, are subject to the interpretation of B+N Industries, Inc.3. Tooling dies and fixtures made and used exclusively for a job or customer, remain the property of B+N Industries, Inc., unless otherwise established.

PHOTOGRAPHY OF COMPLETED PROJECTSB+N Industries, Inc. reserves the right to photograph a completed project that has utilized our product offerings, and retains the rights to use the photographs in advertising, on our website, public relations and all marketing materials.

FORTINA SPECIFIC ORDERSWARRANTY We fully support the quality of the Fortina product for 2 years. This warranty covers the finish adhesion of film on aluminum Louvers, Spandrels (Slats), it is not applicable to surface wear and tear from handling.

CANCELLATION AND RETURN ITEMS1. Fortina is considered a custom made to order line, therefore, may not be returned.2. If an order is canceled which is in production the customer is liable for paying for all products ordered.

Materials, Colors, and Finishes Guide

Stock Wood Veneers*

Maple Veneer -301

Cherry Veneer -3031

Walnut Veneer -3049

Recycled Wood Veneers

Redwood -3013

American Black Walnut -3027

Stock Vinyl Colors

Matte White-903

Gloss White-901

Paintable Vinyl*-910

Silver -902

Matte Black-904

Gloss Black-905

Gloss Brown -906

Gloss Red-907

Maple

-908Walnut -909

Chocolate Pear -900

*Notes on Paint-able vinyl• B&N provides the panel in Paintable Vinyl, customer to paint.• Use ONLY LATEX PAINT, not Oil-based paints or solvent-based thinners, as these may damage the surface.

Stock Aluminum Finishes

Clear Anodized Aluminum -038

Black Anodized Aluminum -039

Stock Fabrics

Blanca-708

Chalk-710

Platinum-709

Stock Metal Finishes

Polished Chrome -003

Brushed Chrome-004

White Matte Powder Coat -161

Black Powder Coat -160

Blackened Steel -155

Silver Powder Coat -163

Stock Acrylic

Clear -500

Clear Frosted Both Sides -503

White Frosted Both Sides -510

Gloss White -591

Gloss Black -592

Stock Laminates

White Matte Laminate -209

White Gloss Laminate -363

Black Matte Laminate -205

Black Gloss Laminate -254

Maple Laminate -201

Cherry Laminate -286

Walnut Laminate -389

Wood Veneer Disclaimer: Please keep in mind that veneers are, in fact, real wood. As such the veneered products you specify may feature the grain variation and natural characteristics allowed in the grade and species specified. Any veneer samples provided by B+N Industries are meant only to be representative of the species selected. Actual color, grain pattern and other appearance characteristics will vary within each veneer species and grade.

B&N Industries

Main Offices:

1409 Chapin Avenue, 2nd Floor

Burlingame, California 94010

1.800.350.4127

www.BNind.com

New York Showroom and Offices:

(By Appointment Only)

420 West 14th Street

New York, New York 10014

212.255.4110

© B&N Industries, Inc.