tablet casegoods price book - geiger

Tablet Casegoods price bookTable of Contents
2 Warranty and Limitations 3 Design Rights 3 Additional Products 3 Specification Notes 4 Typical Configurations 8 Finishes and Options 10 Desk Tops and Modesty Panels 23 Desk End Panels 24 Rectangular Desks 25 Arc Front Desks 29 Bullet Desks 33 Ellipsoid Desks 35 Conference Desks 37 Corner Units 39 L Returns 45 Bridge Returns 71 Rear Units 77 Credenzas 101 Kneespace Credenzas 111 Runoff Desks 131 Bookcases 137 Vertical Storage 149 Machine Tables 177 Mobile Pedestals 179 Pedestals 181 Low Storage 185 L Return Tops 189 Credenza or Rear Unit Tops 191 L Return Panels 193 Rear Unit Panels 197 Credenza Panels 201 Mid Span Support Panels 201 Upper Bookcases 203 Wall Mount Storage 207 Wall Mount Shelves 245 Wall Mount Tackboards 246 Upper Storage 247 Upper Storage Tackboards 285 Overhead / Tower Units 286 Overhead / Tower Unit Tackboards 358 Accessories 359 Index 361
Tablet® Casegoods Prices effective January 4, 2021 Published November 1, 2021
Terms and Conditions of Sale
Geiger International, Inc. • 6095 Fulton Industrial Blvd., SW •Atlanta, GA 30336-2806 1 . 8 0 0 . 4 5 6 . 6 4 5 2 • w w w . g e i g e r f u r n i t u r e . c o m
1/21
2
Application of Standard Terms
Only the standard terms of sale stated in this catalog apply to any transaction unless those terms are modified or supplemented by a written document signed by an officer of Geiger International, Inc. (“Geiger”). Any terms contained in Customer’s purchase order, including standard printed provisions, that are additional to or contrary to these terms, are not effective.
Use of Furniture and Materials
Geiger assumes that textiles, leathers and products are intended for commercial use and are not being bought for use primarily for personal, family, or household purposes. When installed and used as intended, products remain chattel property, are not considered fixtures, and no interest in them should arise under applicable real estate law.
Furniture Prices
Prices are determined by using the published list prices in effect when Geiger receives Customer’s completed purchase order. If Customer’s requested ship date is more than three months after Geiger receives Customer’s order, it may be repriced using the list prices in effect when products ship. If Customer designates special finishes or options, additional charges may apply. Services such as design, project management, packaging, storage, inside delivery, double handling, installation, or inventory management are not included in Geiger’s list prices.
COM / COL Procedures
If an order includes Customer-supplied materials, Customer must ship those materials to Geiger at Customer’s own expense. The materials must be tagged with Geiger’s confirmation number, item number, Customer’s name, and purchase order number. Geiger is not liable for inadequacies in Customer’s materials. Geiger will notify Customer of any apparent defects in Customer’s materials before manufacturing.
Taxes
Customer is responsible for any local sales taxes or other similar taxes imposed on transactions.
Delays
Geiger is not liable for failure to ship by the acknowledged shipping date or any other date. Geiger is not liable for a delay or failure in shipment or performance if the delay or failure is caused by acts of omission of Customer, its agents, employees, contractors, a governmental authority, or God; delays in transportation; or other similar causes that are not within Geiger’s reasonable control. Geiger is excused from further performance of its obligations for the duration of a force majeure cause.
Changes and Cancellation
Geiger’s acceptance of an order is final and binding and an order may not be changed or canceled without Geiger’s written consent.
Orders placed on any of Geiger’s expedited shipment programs and orders of custom-dyed or custom-woven materials may not be changed or canceled. To change or cancel other orders, contact Geiger Customer Care in writing for authorization and applicable charges.
Storage
If Customer cannot accept delivery when products are ready, it is the customer's responsibility to transfer products to storage and products are invoiced at that time. Customer is responsible for actual storage charges and any other expenses relating to the storage of products or materials. Customer bears all risk of loss for products or materials in storage.
Freight Terms
For casegoods and seating orders shipped within the 48 contiguous United States, surface freight charges are included. For textile and leather orders actual freight charges will be invoiced. Orders are shipped via ground carrier unless requested otherwise. For orders shipped to Alaska or Hawaii, the freight terms stated above apply only to the port of embarkation. Shipments beyond that point are freight collect. Domestic deliveries are shipped FOB Geiger’s plant to a destination designated by Customer by a method Geiger selects.
All textile shimpents will be made FOB Geiger Textiles, Yaphank, NY 11980. All leather shipments will be made FOB Geiger Textiles, Hildebrand, NC 28637.
Packaging and Shipping
Geiger’s casegoods products are shipped in component form. Shipments over $50,000 net are blanket wrapped. Tops and panels are shrink wrapped with cardboard corner protection. Pedestals, storage units, overheads and vertical storage units are wrapped in blankets and shrink wrapped with cardboard corner protection. Blankets are to be returned to Geiger for reuse. If the customer request cartoning on orders over $50,000 net, there will be a charge of five percent of the net order. Packing materials are recyclable.
Casegood shipments from Atlanta under $50,000 net are cartoned. Cartoned shipments are packaged with cardboard channels and shrink wrap.
Geiger’s seating is cartoned in boxes for all shipments.Blanket wrapping is available upon request.
If Customer requests special shipping or delivery methods, Customer is responsible for any extra costs that result.
Packaging and Shipping (continued)
Customer obtains title to products and materials and assumes the risk of loss for them upon shipment from Geiger’s plant. Geiger reserves the right to make partial shipments, of truckload quantities, as products are manufactured.
Shipping Surcharge
A shipping surcharge will be added to all orders under $100,000 list based on the ship-to address. The surcharge is a percentage of the total list price of the entire order, calculated on the base price only. Upcharges for veneer, edges, textiles, pulls, etc., are not counted in the calculation.
Zone 1 3.0% (GA, NC, SC) Zone 2 3.5% (AL, FL, MS, TN, AR, LA) Zone 3 4.0% (IL, IN, KY, MI, OH, WI, IA, KS, MN, MO, ND, NE, SD, DC, MD, VA) Zone 4 4.5% (CT, MA, ME, NH, RI, VT, DE, NJ, NY, PA, WV) Zone 5 5.0% (OK, TX, AZ, NM, NV, UT, CO) Zone 6 5.5% (OR, WA, ID, MT WY, CA, Canada)
International Shipping
Orders for export are shipped Ex Works factory (Incoterms 2000). The charge for export packing is five percent of the net order value. There are no export packing charges on shipments to Canada.
Claims
All blanket wrapped shipments must be unwrapped and inspected at the dock, in the presence of the driver. Claims for "concealed damage" or "subject to inspection" will not be honored on blanket wrapped shipments.All cartoned shipments must be inspected for visual outside damage to the package.
Damages and piece count shortages must be noted on the bill of lading. Freight claims must be filed within 30 days (including cartoned shipments with concealed damage). Contact Customer Care for a warranty/freight claim form and send it by fax, mail or email to:
Geiger International 6095 Fulton Industrial Blvd., SW Atlanta, GA 30336-2806 Attention: Warranty Department Fax: 1.404.836.7519
Order Information
Herman Miller dealers must submit all purchase orders to Geiger via Omni. For assistance with this process, please contact Herman Miller Sales Technology Support at 800.833.3330.
All Geiger Gallery and non-Herman Miller dealers may submit their orders via email or fax at 404.836.7519. For assistance with this
Order Information 01/20
3
Midwest [email protected] New York [email protected] Northeast [email protected] South [email protected] West [email protected] Int'l [email protected]
Warranty
Geiger International, Inc. (“Geiger”), 6095 Fulton Industrial Blvd., SW, Atlanta, GA 30336-2806, USA, warrants the products sold by it to be free from defects in material and workmanship, regardless of the number of shifts during which the products are used, for the warranty periods specified below.
This warranty covers the sale of Geiger product in all countries. Not all of the product lines appearing on this list are marketed by Geiger in all countries, and appearance on this list does not imply an offer for sale of a product line in a particular place. Product line availability is defined in current price lists applicable to different regions.
Geiger Commercial Office Furniture Products 12 years All products sold under the Geiger® brand name, except as limited or described below.
Textiles and Leathers 3 years Includes, but is not limited to Edelman Leather, Geiger, Herman Miller, Maharam, and Place fabrics.
Nonstandard Products 1 to 5 years Warranty length on nonstandard products not covered by the 12-year warranty is identified on individual product quotes.
All Other Products, Parts, and Services 2 years Height adjustable bases (electrical parts)
5 years Height adjustable bases (mechanical parts) Task light electronic ballasts
3 years All service parts
6 months All other products, parts, and any services not listed above, sold or furnished by Geiger, except for consumable products such as light bulbs and other electronic products for which no warranty is given
Other Manufacturers’ Products None Geiger will pass through to the original purchaser any warranty supplied by other manufacturers to the extent possible, including, but not limited
to, open-line laminates.
Provisions that apply to all products and services:
During the applicable warranty period, Geiger, as its sole obligation, will repair or replace (at its option) any product, part, or component covered by this warranty and sold after the effective date of this warranty, which fails under normal use as a result of a defect in material or workmanship; Geiger will repair or replace the aforementioned product, part, or component with a comparable product, part, or component.
This warranty extends only to the original purchasers who acquire new product from Geiger, or its authorized resellers. Any product, part, or component must have been installed, used, and maintained according to Geiger’s published instructions in order to be eligible for coverage under this warranty and must not have been subject to misuse or abuse. Any modification to the original product voids the warranty. Geiger does not warrant the performance of the product when used in combination with other than original Geiger product.
The warranty period starts from the date of purchase.
This document inclusively describes all of the warranties given and remedies available with respect to the company’s products and services. Geiger disclaims any other warranty whether express or implied, statutory or otherwise, in relation to the products.
Geiger does not warrant: • natural variations in wood grain or figure or
the presence of character marks • changes in surface finishes due to aging or
exposure to light • marks, scars, or wrinkles occurring naturally
in leather • veins, marks, voids, fissures, or cracks found
naturally in stone
In addition, Geiger does not warrant: • failure resulting from normal wear and tear • the matching of colors, grains, or textures of
natural materials • the colorfastness or the matching of colors of
textiles, including an exact match to cuttings or to swatch cards
• damage, marking, or staining of veneer surfaces due to contact with rubber or similar compounds; damage from sharp objects or imprinting from writing instruments, or prolonged exposure to direct sunlight
Geiger tests Customer’s Own Material (COM) and other customer-supplied items for manufacturing quality only and does not provide any warranty with regard to these materials.
Geiger does not warrant products that are
exposed to extreme environmental conditions or that have been subject to improper storage.
Geiger’s products meet the requirements of national and specific local codes as stated in the price books and other written publications.
TO THE EXTENT ALLOWED BY LAW, ANY IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE DISCLAIMED AND TO THE EXTENT THEY ARE LEGALLY REQUIRED, ARE LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN WARRANTY.
GEIGER SHALL NOT BE LIABLE FOR LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Applies in US only: Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions in the two preceding paragraphs may not apply. This warranty gives the purchaser specific legal rights; however, the purchaser may also have other rights that may vary from state to state.
Applies outside US: Except as stated above, Geiger will not be liable for any loss or damage (including costs) however caused, whether direct or consequential, incurred or suffered by the purchaser or any third party in respect of the products but nothing contained herein will or will be considered to exclude or restrict any liability on Geiger’s part for death or personal injury resulting from negligence.
Limitations and Disclaimers
Geiger is not liable for loss of time, inconvenience, lost profits, commercial loss, or other special, consequential, or incidental damages for any transaction.
Geiger reserves the right to change its designs, its methods of construction, or its prices, charges, or policies at any time without notice to Customer.
Design Rights
The designs depicted in Geiger’s catalogs and price lists are proprietary to Geiger and Geiger reserves the exclusive right to manufacture them. Any reproduction of these designs infringes Geiger’s rights and that infringement will be prosecuted.
Warranty (continued) Warranty (continued)
How to Specify
• For each product ordered, specify a product number string. The string should include the product number and all finish and detail codes listed at the bottom of the pricebook page under "Specify".
• Specify the finishes and details in the same sequence shown on the pricebook page.
• Product number string example: RD5PL3066A4 942 T51 LU XBSS LK VNL
• The product number string above includes all codes required for a Tablet single pedestal rectangular desk with the following specifications:
Product Number .......RD5PL3066A4 Wood Finish ...............942 Sundance Cherry Edge Detail ................T51 Cove Painted Finish ............LU Soft White Pull ..........................XBSS Barre Pull Locks .......................LK Black
Drawer .......................VNL Black Vinyl
• Most units ship unassembled; all hardware for assembly is included.
• Top depths vary with edge detail, and depth dimensions do not include edge overhang except where noted.
• Tops are 1 1/2" thick. Fascia bases are 2 1/2" high.
• A pencil tray is included in the top box drawer of all pedestals with box drawers.
• Hanging file frames are included in all pedestals and low storage with file drawers. File frames accommodate letter or legal files.
• All shelves are 1" thick and adjustable or removable, except where noted.
General Notes
Additional Products
Refer to the Geiger Construct pricebook for the following components that can be used with Tablet casegoods products. • Wall mounted credenza tops with/without pencil lip, support legs • Wall mount utility rails, rail mounted accessories • Power modules for use in pencil lip gap • Credenza tops with pencil lip • Kneespace panels • Locker • Height adjustable credenza desks • Upper cabinets for use above Construct low storage • Base pedestals for height adjustable desks* • Low storage for use next to base pedestals* • Back painted glass markerboards and tackboards for use next to Construct lockers
* Construct base pedestals and low storage include several features that do not match Tablet: dimensions, lock locations, drawer boxes and file frames. Therefore, these Construct components should not be specified in the same office as Tablet pedestals and low storage units.
1/21 5
Specification Notes
Hinge Locations
• Wall mount storage, upper storage and overhead / tower units with hinged doors are divided and hinged as follows:
2 doors (30" to 48" wide)
Electrical Access Panels
• Corner unit, L return, bridge return, rear unit and kneespace credenza panels are available with an electrical access door, centrally located in the panel. The door is hinged left unless otherwise noted. The panel includes a cord gap 1 1/4" high along the top edge above the door.
Widths of doors and cord gaps on corner
unit, L return and rear unit panels are as follows:
Panel Width Door Width Cord Gap 22" to 25 7/8" ............16" ...............5" 26" to 32 7/8" ............16" ...............9" 33" to 42 7/8" ............24" .............16" 43" to 46 7/8" ............30" .............24" 47" and wider ............30" .............30"
Widths of doors and cord gaps on bridge return and kneespace credenza panels are as follows:
Panel Width Door Width Cord Gap
21" to 24 7/8" ............16" ...............5" 25" to 31 7/8" ............16" ...............9" 32" to 41 7/8" ............24" .............16" 42" to 45 7/8" ............30" .............24" 46" and wider ............30" .............30"
L Returns and Corner Units
• L returns include one small grommet, and most bridge returns include two small grommets. Each grommet provides a 1" diameter opening (without the removable cover plate).
• Corner units include one large grommet which provides a 2" x 1 1/4' opening.
Lock Locations • Wall mount storage, upper storage and
overhead / tower units with hinged doors are available with locks. Lock locations are shown in front elevation below.
• L returns include one small grommet, and most bridge returns include two small grommets. Each grommet provides a 1" diameter opening (without the removable cover plate).
• Corner units include one large grommet which provides a 2" x 1 1/4' opening.
1/216
Wall Mount Storage
• Inside depth clearance of wall mount storage is 13 1/4".
• Inside height clearance of wall mount storage is as follows:
21 9/16"H ................................. 17"H 21 9/16"H with project shelf ..... 15 1/4"H 33 9/16"H ................................. 28"H 33 9/16"H with project shelf ..... 26 1/4"H Project shelves have an inside height
clearance of 3 1/2".
• All units are predrilled for black wire dividers; two dividers are included. Additional dividers may be ordered separately.
• Light fixtures are included and ship separately for field installation.
• Customer should give close attention to the integrity and stability of the wall on which any wall mounted storage is attached. Customer is responsible for the cost of reinforcing or improving its walls, and should involve an architect or engineer, where appropriate. Attachment hardware should be securely fastened to the studs in load- bearing walls or in another secure fashion, as the architect or engineer recommends.
Upper Storage and Tower Units
• Inside depth clearance of upper storage is 13 1/4".
• Inside height clearance of upper storage, side towers and center overheads in overhead / tower units is as follows:
43"H .......................................... 17"H 43"H with project shelf .............. 15 1/4"H 55"H .......................................... 28"H 55"H with project shelf .............. 26 1/4"H
Project shelves have an inside height clearance of 3 1/2".
• Upper storage and overhead / tower units require fabric wrapped tackboards which should be specified separately.
• Light fixtures are included in upper storage and in overhead / tower unit center overheads. Fixtures ship separately for field installation. Side towers do not include light fixtures.
• All units are predrilled for black wire dividers; two dividers are included. Additional dividers may be ordered separately.
• Upper storage and overhead / tower units are designed to be used above credenzas (Fig. 1) or rear units (Fig. 2).
Fig. 1 Fig. 2
If upper storage units or overhead / tower units are required for use across a desk /
L return (Fig. 3), or across a desk / bridge return / rear unit (Fig. 4), the overall dimensions of all units must be carefully calculated to ensure proper alignment.
Fig. 3 Fig. 4
Upper storage units are designed with side panel support on each end. If the overall width of the upper storage unit(s) exceeds the total width of the casegoods underneath, the unit will be too wide to be supported as necessary on both ends.
• Upper storage and overhead / tower units must have adequate pedestal, low storage or panel support under the worksurface.
• Wall mounted storage units are for overhead storage only and not to be used as a credenza. Units should not be mounted with the top below eye level. Impressed manufacturing stamps are visible on top edge of doors.
1/21 7
Letter Side to Side
Legal Front to Back
Legal Side to Side
Pedestal 16-1/8" 18-1/2" 15" 12" - 12" Pedestal 16-1/8" 23-1/2", 29-1/2" 20" 12" - 12" Pedestal 19-1/8" 18-1/2" 15" 15" 15" 15" Pedestal 19-1/8" 23-1/2", 29-1/2" 20" 15" 20" 15" Low storage 30" all 30" 24" 15" 24" Low storage 36" all 30" 30" 30" 30"
Filing capacity of pedestals and low storage are as follows:
1/218
Typical 1
Typical Configurations
A RR1W-3260 bullet runoff desk 1,575 B RT7O-2590 credenza top, T50 edge 1,277 C RLDW-3625-D4 wood low storage, 2B1F, stepped tab pull 1,917 D RW9W-9022-ATS wall mount storage, wood, proj. shelf 5,083
(acrylic dividers and diffuser, silver shelf) E RF2F-9023 wall mount tackboard (fabric not included) 669 F R3WEL-2554 rear unit L panel, wood, electrical access 1,858 G RV3W-3072 vertical storage, wood, FF/Doors, fin. top 5,229
Total List $17,608
Typical 2 A RD5WL-3272-A4 rectangular desk, flush front, 4,039
recessed wood pedestal, wood top B RT7O-2596 credenza or rear unit top 1,348 C RHEW-2542 bridge return, straight wood top, wood panel, 2,253
electrical access door, 2 small grommets D RLBW-3619-D5 low storage, wood, no top, FF 1,733 E R3WEL-2560 rear unit L panel, wood, elec. access, 1,939 F RV6W-3072 vertical storage, wood, wardrobe, shelves 4,577 G RW1W-9622 wall mounted storage, wood, 6 doors, light 4,278 H RF2F-9623 wall-mounted tackboard, 669
2 pc, (fabric not included)
Total List $20,836
Diffuser Acrylic • Divider Acrylic • Drawer Boxes
Drawer Boxes Vinyl (no upcharge)
VNL .........Vinyl
Wood (add upcharge of $230 per pedestal, low storage or vertical storage unit)
WOD .......Wood
Notes
Vinyl drawer boxes are wrapped in black vinyl. Wood drawers are clear finish oak with dovetailed construction.
Diffuser Acrylic
DCWH ....Chiroroot White R104 .......Natural Beach Grass DL62 .......Woven Powder White DL74 .......Taipei Ivory DL75 .......Taipei Tiger DL76 .......Taipei Jade
Notes
Diffusers on wood and painted units are provided in the same wood or paint finish as specified on the unit.
Only acrylic diffusers allow light to pass through the diffuser.
Wood and painted diffusers are opaque.
Woven and Taipei are fabric embedded in acrylic.
Chiroroot White is all natural handmade paper embedded in acrylic.
Natural Beach Grass is beach grass embedded in clear acrylic.
Divider Acrylic
ACF ........Frost
Notes
Dividers on wood and painted units are provided in the same wood or paint finish as specified on the unit.
Options and Finishes
T50 .......Tablet Square
Solid Edge Details (add upcharge shown on the product page)
Edge Solid Overhang Depth T51 .......Cove .........................1/4" .......... 3/4" T52 .......Indent ..........................0" .......... 3/4" T53 .......Step .............................0" .......... 3/4" T54 .......Bead ............................0" .......... 3/4" E01 .......Square ......................1/4" ............. 1" E02 .......Quarter Radius .........1/4" ............. 1" E03 .......Bullnose ....................3/4" ............. 1" E06 .......Waterfall ...................1/4" .......1-1/2" E07 .......Ellipse .......................3/4" ............. 1" E10 .......Stepped Bullnose .....3/4" ............. 1" E11 .......Classical ...................1/4" ............. 1" E14 .......Quarter Round ..........3/4" ............. 1" E15 .......Stepped Waterfall .....1/4" .......1-1/2" E16 .......Oval ..........................1/4" .......1-1/2" E17 .......Stepped Radius ........1/4" ............. 1" E20 .......Stepped Knife ...........3/4" ............. 1"
Notes
T50 Square edge is 1-1/2" thick with 3/16" deep solid banding with no edge overhang. Banding is two layers, each is 2mm thick for a total of 3/16".
T50 Square edge is not available with inlay or marquetry.
All solid edge details are 1 1/2" thick.
For products with solid wood edges, the solid wood species used with each type of wood finish is as follows:
Anigre finish ............maple solid Ash finish ................ash solid Beech finish ............maple solid Cherry finish ...........cherry solid Hickory finish ..........oak solid Maple finish ............maple solid Oak finish................oak solid Paldao finish ...........walnut solid Sapele finish ...........mahogany solid Sycamore finish ......maple solid Walnut finish ...........walnut solid
Natural wood finishes are unstained to maintain the natural beauty and clarity of the wood. When the veneer and solid wood species are not the same the veneer and solid may differ in color and graining. When a stained wood finish is specified, the solid wood edges are stained to match the veneer top as closely as possible.
1/2112
Fabrics Tablet Casegoods
Tackboard Fabrics Price
Vendor Group COM COM Abacus Maharam H Abacus Standard Maharam F Across Maharam G Alter Maharam F Amenia Geiger 7 Bateau Geiger 4 Bellano Geiger 7 Bento HMI 3 Braid Geiger 4 Cambrai Geiger 3 Canon Geiger 2 Chain HMI 1 Cheswick Geiger 5 Claremont Geiger 5 Coincide Maharam F Coincide High Performance Maharam G Cord HMI 2 Crew Maharam G Crossing HMI 1 Dapper Geiger 5 Dorset Geiger 7 Double Beam Geiger 7 Double Beam Redux Geiger 7 Envie Geiger 5 Epinglé Geiger 7 Essential Twill Geiger 5 Even Geiger 2 Glaze HMI 3 Glisten HMI 4 Graphton Geiger 7 Gridwork Geiger 6 Grosgrain HMI 2 Harlow Geiger 5 Horizon HMI 2 Houndstooth Check Geiger 5
Tackboard Fabrics Price
Vendor Group Ingenue Geiger 5 Iota Geiger 5 Irregular Grid Geiger 4 Jolie Geiger 4 Kalista Geiger 4 Manner Maharam C Metric Maharam C Micro Houndstooth Geiger 4 Milestone Maharam C Mini Plaid Geiger 3 Ottoman Geiger 4 Overture Geiger 6 Panno Di Dolcé Geiger 7 Pantile Geiger 7 Piccolo Geiger 4 Pick-Stitch Plaid Geiger 6 Pinpoint Geiger 3 Pixel Stripe Geiger 5 Resca Geiger 7 Rove Maharam F Saille Geiger 3 Sateen Weave Geiger 7 Savannah HMI 3 Sommar Geiger 6 Straightaway Geiger 5 Tenon Geiger 5 Threads Geiger 5 Tweeded Stripe Geiger 3 Twill Plaid Geiger 7 Twist HMI 2 Vavare Geiger 5 Vesture Geiger 7 Vionette Geiger 5 Wool Satin Geiger 7 Wool Tweed Geiger 7
Fabrics
Refer to the Geiger Graded-In Textiles & Leathers Guide for colors and codes of all fabrics. Refer to the Geiger Textiles price list for detailed information on Geiger proprietary fabrics.
COM Fabric Requirements
Yardages listed below are based on 54" or 66" wide fabric with no pattern or repeat. Geiger Customer Service must confirm yardage requirements for narrower fabrics or fabrics with pattern or repeat.
28" to 48" wide tackboard .................. 1 yard 52" to 96" wide tackboard ................ 2 yards
COM +$0 +$0 Price Group 1 +$41 +$82 Price Group 2 +$49 +$98 Price Group 3 +$61 +$122 Price Group 4 +$75 +$150 Price Group 5 +$109 +$218 Price Group 6 +$143 +$286 Price Group 7 +$177 +$354 Price Group C +$55 +$110 Price Group D +$73 +$146 Price Group E +$88 +$176 Price Group F +$106 +$212 Price Group G +$144 +$288 Price Group H +$179 +$358 Price Group I +$216 +$432 Price Group J +$253 +$506 Price Group K +$290 +$580 Price Group L +$327 +$654 Price Group M +$364 +$728 Price Group N +$401 +$802 Price Group P +$474 +$948 Price Group Q +$547 +$1,094
Fabric Upcharges 28" to 48" 52" to 96" tackboard tackboard
Fabrics
COM Procedures • Fire Retardancy • Grommets
CGS1CGCACGL1
Notes
Small grommet is metal and provides a 1 1/2" diameter opening (without removable cover plate).
Large grommet is metal and provides a 2" x 1 1/4" opening.
Small cable access grommet is metal and provides a 3" diameter opening.
Fire Retardancy
NOCAL ......Fire retardancy not required
Geiger is not responsible for delays caused by fabric not correctly marked or shipped to the wrong location. Freight charges to ship COM from an incorrect location to Geiger may be charged to the Customer.
Questions regarding COM procedures should be directed to Geiger Customer Care at 800.456.6452.
Geiger accepts COM for application on its products. However, Geiger does not warrant the application, suitability or performance of those materials. Geiger reserves the right to reject any COM that it considers unsuitable. Geiger will notify Customer of any apparent defects in Customer’s materials before manufacture. Orders that include COM are scheduled at standard leadtime when Geiger receives all the materials on the order. Geiger will split ship COM orders only if Customer notifies Geiger in writing.
Testing and Approval All Customer's Own Material requires testing and approval prior to order submission. Failure to obtain approval will result in delayed processing and scheduling of the order.
Step 1. Herman Miller dealers should request a COM test number through Omni. Customers and dealers without Omni access should contact Geiger Customer Care at 800.456.6452 for a test number.
Step 2. Send one 2-yard sized sample tagged with the test number to:
Geiger International, Inc. 6095 Fulton Industrial Blvd Atlanta, GA 30336 Attention: COM Approval
Step 3. Within four business days of receipt of the memo sample you will be contacted by Geiger Customer Care Department with testing results. If approved, you will be given a four-digit COM number for the fabric, and yardage requirements will be confirmed.
The COM number is specific to each fabric and indicates supplier, fabric style, color and applied direction of the fabric. It must be shown on the purchase order and the COM tagging when shipped to Geiger.
Tagging and Shipment Customer must ship COM materials to Geiger at their own expense. To match the material with the Customer's order, all COM must be tagged as follows:
COM No. ____________________ Dealer Name ____________________ Customer Name ____________________ Dealer PO No. ____________________ Geiger Order No._____________________ Product Item No. ____________________
All COM for tackboards should ship to: Geiger International, Inc. 6095 Fulton Industrial Blvd Atlanta, GA 30336 Attention: Tackboard Department
COM Procedures • Tackboards Grommets
Small Grommet For 1 small grommet in L returns and CGS1 small grommets for field installation
S926 ........Black SCHR ......Chrome SBNZ .......Bronze SEH .........Metallic Bronze (Powder-Coat) SMS .........Metallic Silver (Powder-Coat) SSAC .......Satin Chrome
Large Grommet For 1 large grommet in corner units and CGL1 large grommets for field installation
L926.........Black LBNZ .......Bronze LCHR .......Chrome LEH..........Metallic Bronze (Powder-Coat) LMS .........Metallic Silver (Powder-Coat) LSAC .......Satin Chrome
Small Cable Access Grommet For CGCA grommets for field installation
1C926 ......Black 1CBNZ .....Bronze 1CCHR ....Chrome 1CEH .......Metallic Bronze (Powder-Coat) 1CMS.......Metallic Silver (Powder-Coat) 1CSAC.....Satin Chrome
Small Grommet For 2 small grommets in bridge returns
2S926 ......Black 2SBNZ .....Bronze 2SCHR ....Chrome 2SEH .......Metallic Bronze (Powder-Coat) 2SMS .......Metallic Silver (Powder-Coat) 2SSAC .....Satin Chrome
1/2114
Notes
Wood legs are solid, finished to match as closely as possible the same finish on wood veneered table tops.
Leg Finishes, for bullet, ellipsoid, and conference desks with L panel and leg
Code Description Sheen Solid
Metal Leg Finishes 926 Black CHR Chrome EH Metallic Bronze (powder-coated) MS Metallic Silver (powder-coated)
SAC Satin Chrome
Wood Leg Finishes 911 Champagne Maple Low Maple 941 Champagne Beech Low Beech 942 Sundance Cherry Low Cherry 943 Caramel Cherry Low Cherry 946 Cocoa Cherry Low Cherry 951 Natural Anigre Low Maple 956 Cocoa Sapele Low Mahogany 962 Toasted Walnut Low Walnut 963 Charred Walnut Low Walnut 964 Bronzed Walnut Low Walnut 965 Smoked Walnut Low Walnut 966 Coffee Walnut Low Walnut 967 Smoked Paldao Low Walnut 968 Figured Sycamore Low Maple 969 Warm Paldao Low Walnut 977 Chocolate Ash Low Ash 978 Natural Oak Low Oak 981 Champagne Hickory Low Oak 991 Champagne Ash Low Ash 998 Ebony Ash Low Ash 9A1 White Ash Low Ash 9K1 Rift Oak Low Oak 9K6 Burnt Oak Low Oak ED Aged Cherry Low Cherry EK Medium Red Walnut Low Walnut
G2U Light Brown Walnut Low Walnut G40 Dark Brown Walnut Low Walnut UX Walnut On Cherry Low Cherry 662 Toasted Walnut Matte Walnut 663 Charred Walnut Matte Walnut 664 Bronzed Walnut Matte Walnut 665 Smoked Walnut Matte Walnut 666 Coffee Walnut Matte Walnut 667 Smoked Paldao Matte Walnut 668 Figured Sycamore Matte Maple 669 Warm Paldao Matte Walnut 677 Chocolate Ash Matte Ash 678 Natural Oak Matte Oak 6A1 White Ash Matte Ash 6K1 Rift Oak Matte Oak 6K6 Burnt Oak Matte Oak
1/21 15
Light Installation Location (add $104 upcharge for UK and international)
UK...........United Kingdom (and international) U ...........United States
Notes
Specify Light Bulb Color, Light Cord Variation and Light Installation Location.
Wired light fixtures are shipped with eight-foot cords with plugs. Cords are attached on the left, right or center, as specified. Lights ship separately for field installation.
Fixtures for international installations and installations in the United Kingdom (UK) are provided with a U.K. cord and plug.
Provision of power source and installation of fixtures are the responsibility of the Customer and should be performed by a licensed electrician according to local codes.
Lights • Task
CW ..........Cool White Bulb NW ..........Neutral White Bulb WW .........Warm White Bulb
Light Cord Variation
Light Installation Location (add $104 upcharge for UK and international)
UK...........United Kingdom (and international) U ...........United States
Notes
Specify Light Bulb Color, Light Cord Variation and Light Installation Location.
Wired light fixtures are shipped with eight- foot cords with plugs. Cords are attached on the left or right, as specified. Lights ship separately for field installation.
Fixtures for international installations and installations in the United Kingdom (UK) are provided with a universal ballast and a standard U.S. cord and plug. The appropriate cord and plug must be purchased and installed locally by the Customer.
Provision of power source and installation of fixtures are the responsibility of the Customer and should be performed by a licensed electrician according to local codes.
1/2116
Notes
When locks are specified, lock cylinders must be ordered separately for field installation. There is no charge for lock cylinders. Products will be shipped with lock chassis installed. Lock cylinders will ship separately, tagged as specified. Installation of cylinders will be on-site according to instructions provided. Geiger will not be responsible for lock cylinder installation.
How to Order Lock Cylinders
1. Calculate the total number of locks per office.
2. For each office, order a lock cylinder kit with the required number of cylinders. Use part number PLUG1 (1 cylinder), PLUG2 (2 cylinders), etc. up to PLUG15.
3. Specify lock cylinder finish X Black or N Nickel.
4. If a specific key number is required, specify a key number between 226 and 427, excluding 408 and 412. For a factory selected key number, specify Z.
5. Include tagging information (floor, office, typical, etc.).
Lock Cylinder Order Example
Part Number PLUG3 Description Lock cylinder kit, includes 3 lock cylinders, keyed alike Lock Finish X Black Key Number 233 Tag Third Floor, Office 300
1/21 17
Paint Finishes
Vienna Pull
Wedge Pull
Notes
Metal pulls can be specified on wood or painted products.
Frame Pull
Half-Round Pull
Knob Pull
Long Tab Pull
Metal Pulls Arc Pull
Barre Pull
Crescent Pull
1/21 19
Wood, Flush, and Wave Pulls
For wood products; finish must match drawer front finish and sheen.
Wood Pull Code
Flush Pull Code
Wave Pull Code Description Sheen Solid Notes
W662 F S Toasted Walnut Matte Walnut Flush, Wood, and Wave pulls are solid wood. In some cases the solid wood species is different from the wood species used on veneered surfaces such as desk tops, doors and drawer fronts. Solid wood pulls may differ in color and graining from veneered fronts with the same finish code when they are two different wood species.
Wave pulls are not available on doors. If Wave pulls are specified on doors, doors include no pull and touch latch on right door.
When Flush pulls and locks are specified on low storage doors, lock is located in the top left corner of the right door.
Flush pulls are not available on mobile pedestals with pencil/box/ file drawers.
W663 F S Charred Walnut Matte Walnut
W664 F S Bronzed Walnut Matte Walnut
W665 F S Smoked Walnut Matte Walnut
W666 F S Coffee Walnut Matte Walnut
W667 F S Smoked Paldao Matte Walnut
W668 F S Figured Sycamore Matte Maple
W669 F S Warm Paldao Matte Walnut
W677 F S Chocolate Ash Matte Ash
W678 F S Natural Oak Matte Oak
W6A1 F S White Ash Matte Ash
W6K1 F S Rift Oak Matte Oak
W6K6 F S Burnt Oak Matte Oak
W911 F S Champagne Maple Low Maple
W941 F S Champagne Beech Low Beech
W942 F S Sundance Cherry Low Cherry
W943 F S Caramel Cherry Low Cherry
W946 F S Cocoa Cherry Low Cherry
W951 F S Natural Anigre Low Maple
W956 F S Cocoa Sapele Low Mahogany
W962 F S Toasted Walnut Low Walnut
W963 F S Charred Walnut Low Walnut
W964 F S Bronzed Walnut Low Walnut
W965 F S Smoked Walnut Low Walnut
W966 F S Coffee Walnut Low Walnut
W967 F S Smoked Paldao Low Walnut
W968 F S Figured Sycamore Low Maple
W969 F S Warm Paldao Low Walnut
W977 F S Chocolate Ash Low Ash
W978 F S Natural Oak Low Oak
W981 F S Champagne Hickory Low Oak
W991 F S Champagne Ash Low Ash
W998 F S Ebony Ash Low Ash
W9A1 F S White Ash Low Ash
W9K1 F S Rift Oak Low Oak
W9K6 F S Burnt Oak Low Oak
WED F S Aged Cherry Low Cherry
WEK F S Medium Red Walnut Low Walnut
WG2U F S Light Brown Walnut Low Walnut
WG40 F S Dark Brown Walnut Low Walnut
WUX F S Walnut On Cherry Low Cherry
Flush Pull
Wave Pull
Wood Pull
Price
Group Customer's Own Material COM Customer's Own Leather COL Abacus Maharam H Abacus Standard Maharam F Across Maharam G Agency Maharam Q Akimbo Maharam G All Grain Leather Edelman R Alloy Maharam F Allusion Geiger 8 Alpaca Epinglé Maharam N Alpaca Herringbone Maharam L Alpaca Velvet Maharam N Alter Maharam F Amenia Geiger 7 Anagram Maharam H Ankara Cloth Geiger 10 Antico Geiger 4 Apt Maharam F Article Maharam E Basketweave Geiger 8 Bateau Geiger 4 Bavaria Maharam S Bavaria Stripe Maharam O Beam Maharam H Bellano Geiger 7 Bento HMI 3 Bespoke Stripe Maharam N Big Stripe Maharam P Blip Maharam H Blumen Maharam L Borders Maharam R Bouclé Geiger 5 Braid Geiger 4 Brindle Maharam F Bristol Leather Geiger 10 Brushed Camel Maharam Q Brushed Merino Maharam P Button-Up Geiger 5 Cambrai Geiger 3 Canon Geiger 2 Canvas Maharam G Capri Geiger 7 Centric Maharam I Checker Maharam K Checker Split Maharam K Chenille Cord Maharam H Cheswick Geiger 5 Circuit Maharam G Claremont Geiger 5 Classic Velvet Geiger 6 Coach Cloth Maharam J Coincide Maharam F Coincide High Performance Maharam G Colline Maharam G Colorwheel Maharam I Compartment Maharam R Corduroy Plaid Geiger 7
Upholstery Fabrics and Leathers
Price
Group Couple Maharam H Crew Maharam G Crossing HMI 1 Crush Maharam F Dapper Geiger 5 Dart Maharam G Deconstructed Rose Maharam Q Derby Geiger 4 Design 9297 Maharam J Dingbats Maharam K Disperse Maharam G Ditto Maharam H Divina MD Maharam H Dorset Geiger 7 Double Beam Geiger 7 Double Beam Redux Geiger 7 Double Triangles Maharam K Dream Cow Leather Edelman R Dwell Maharam E EcoHide Classic Geiger 4 EcoHide Vintage Geiger 5 Envie Geiger 5 Epinglé Geiger 7 Epinglé Stripe Maharam P Essential Twill Geiger 5 Even Geiger 2 Exaggerated Plaid Maharam L Exchange Maharam F Facets Maharam K Floret Maharam G Fluent Crypton Maharam G Focus Maharam E Foot Hills Geiger 8 Free Range Leather Edelman V Fringe Geiger 4 Garden Maharam I Geometri Maharam L Granno Geiger 4 Graphton Geiger 7 Gridwork Geiger 6 Hallingdal Maharam J Harlow Geiger 5 HMI Leather HMI 9 Herringbone Geiger 5 Herringbone Stripe Maharam N Hopsak HMI 5 Houndstooth Check Geiger 5 Hours Maharam T Ingenue Geiger 5 Instill Maharam F Iota Geiger 5 Iron Cloth Geiger 5 Irregular Grid Geiger 4 Jacobs Coat Maharam L Jolie Geiger 4 Kalista Geiger 4 Kindred Maharam G Lanalux HMI 14
Price
Group Layers Garden Maharam P Layers Garden Double Maharam U Layers Park Maharam P Layers Park Double Maharam U Layers Vineyard Large Maharam P Layers Vineyard Small Maharam P Ledger Maharam F Letters Maharam L Linomix HMI 11 Lucio Geiger 5 Manner Maharam C Massive Paisley Maharam Q MCL Leather HMI 11 Mechanism Maharam H Meld Maharam 3 Metallic Dream Cow Leather Edelman R Metric Maharam C Micro Houndstooth Geiger 4 Milaner Geiger 7 Milestone Maharam C Millerstripe Maharam L Mini Plaid Geiger 3 Minimal Maharam F Mister Maharam H Mode Maharam D Mohair Supreme Maharam L Moleskin Emboss Geiger 10 Murmur Maharam C Noble HMI 5 Novello Geiger 4 Octave Maharam H Offset Maharam H Omen Maharam G Optik Maharam K Orakelblume Maharam K Ottoman Geiger 4 Ottoman Stripe Maharam M Overture Geiger 6 Painted Stripe Maharam K Panno Di Dolcé Geiger 7 Pantile Geiger 7 Pare Maharam G Paver Maharam G Piccolo Geiger 4 Pick-Stitch Plaid Geiger 6 Pinpoint Geiger 3 Pitch Maharam F Pixel Stripe Geiger 5 Plait Maharam F Point Maharam N Pristina Geiger 7 Regatta Maharam H Renata Geiger 7 Repeat Classic Stripe Maharam L Repeat Dot Ring Maharam L Resca Geiger 7 Rove Maharam F Rule Maharam H
Upholstery
Upholstery
Refer to the Geiger Graded-In Textiles & Leathers Guide for colors and codes of all fabrics.
Refer to the Geiger Textiles price list for detailed information on Geiger proprietary fabrics.
1/21 21
Price
Group Runner Maharam G Runner Standard Maharam F Saille Geiger 3 Salon Maharam H Sateen Weave Geiger 7 Scuba Maharam F Semplice Leather Geiger 8 Sequence Maharam G Shuttle Standard Maharam F Skein Maharam F Soft Tweed Maharam J Sommar Geiger 6 Staple Geiger 8 Starlet Geiger 8 Steady Maharam F Steady Crypton Maharam G Steelcut Maharam G Steelcut Trio Maharam H Straightaway Geiger 5 Strand Maharam G Strata HMI 4 Striae Geiger 5 Stripes Maharam L Striscia Geiger 8 Sudden Maharam G Superweave HMI 10 Tangram Maharam J Tattersall Reverse Geiger 6 Telary Maharam J Tenera Leather Geiger 11 Tenon Geiger 5 The Firm Maharam Q The Story of My Life Maharam L Threads Geiger 5 Tonica Maharam G Tonus Maharam H Toostripe Maharam L Trait Maharam F Transport Maharam J Trees Maharam K Trio Maharam I Tweeded Stripe Geiger 3 Twill Plaid Geiger 7 Twist HMI 2 Unisol Maharam K Urban Maharam G Vaquero Geiger 5 Vases Maharam I Vavare Geiger 5 Velvet Plaid Geiger 7 Vesture Geiger 7 Vineyard Maharam I Vionette Geiger 5 Voyage Maharam I Waterborn Maharam J Wool Epinglé Geiger 7 Wool Rib Maharam J Wool Satin Geiger 7
Price
Upholstery
Upholstery
Refer to the Geiger Graded-In Textiles & Leathers Guide for colors and codes of all fabrics.
Refer to the Geiger Textiles price list for detailed information on Geiger proprietary fabrics.
1/2122
Wall Mount Shelf Acrylic
ACF ........Frost
COM/COL Requirements
Yardage requirements listed below are based on 54" or 66" wide fabric with no pattern or repeat. Geiger Customer Service must confirm yardage requirements for narrower fabrics or fabrics with pattern or repeat.
mobile ped cushion...............1 yard of fabric 18 sq. ft. of leather
COM/COL Procedures Mobile Pedestal Cushion
Geiger accepts COM and COL for application on its products. However, Geiger does not warrant the application, suitability, or performance of those materials.
Geiger reserves the right to reject any COM or COL that it considers unsuitable. Geiger will notify Customer of any apparent defects in Customer’s materials before manufacture.
Orders that include COM or COL are scheduled at standard leadtime when Geiger receives all the materials on the order. Geiger will split ship COM and COL orders only if Customer notifies Geiger in writing that this is required.
Testing and Approval
All Customer's Own Material and Customer's Own Leather requires testing and approval prior to order submission. Failure to obtain approval will result in delayed processing and scheduling of the order.
Step 1. Herman Miller dealers should request a COM test number through Omni. Customers and dealers without Omni access should contact Geiger Customer Care at 800.456.6452 for a test number.
Step 2. Send one memo sized sample tagged with the test number to:
Geiger North Carolina 218 Cline Park Drive Hildebran, NC 28637 Attn: COM Dept.
Step 3. Within four business days of receipt of the memo sample you will be contacted by Geiger Customer Care or the Herman Miller COM Department with testing results. If approved, you will be given a four-digit COM number for the fabric, and yardage requirements will be confirmed.
The COM number is specific to each fabric and indicates the supplier name, fabric style name, color and applied direction of the fabric. It must be shown on the purchase order and on the COM and COL tagging when shipped to Geiger.
Upholstery COM / COL Procedures Tagging and Shipment
If an order is to include materials supplied by the Customer, Customer must ship materials to Geiger at Customer’s own expense. In order to match the appropriate material with the Customer's order, all COM and COL must be tagged as follows:
COM No. ____________________ Dealer Name ____________________ Customer Name ____________________ Dealer PO No. ____________________ Geiger Order No. ____________________ Product Item No. ____________________
All COM for mobile pedestal cushions should ship to:
Geiger North Carolina 218 Cline Park Drive Hildebran, NC 28637 Attn: COM
Geiger is not responsible for delays caused by fabric not correctly marked or shipped to the wrong location. Freight charges to ship COM from an incorrect location to Geiger may be charged to the Customer.
Questions regarding COM procedures should be directed to Geiger Customer Care at 800.456.6452 or Herman Miller COM Department at 616.654.3400.
1/21 23
Upcharge On Painted Products
667 Smoked Paldao, Quarter Cut, Slip-Matched Matte Walnut +15% +5%
668 Figured Sycamore, Quarter Cut, Slip-Matched Matte Maple +40% +13%
669 Warm Paldao, Quarter Cut, Slip-Matched Matte Walnut +15% +5%
677 Chocolate Ash, Flat Cut, Book-Matched Matte Ash
678 Natural Oak, Flat Cut, Book-Matched Matte Oak
68R Recograin Rosewood, Flat Cut, Slip-Matched * Matte N/A
68W Recograin Walnut, Flat Cut, Slip-Matched * Matte N/A -5% -2%
69A Recograin Frosty Ash, Quarter Cut, Slip-Matched * Matte N/A
69G Recograin Wenge, Quarter Cut, Slip-Matched * Matte N/A -5% -2%
69K Recograin Oak, Quarter Cut, Slip-Matched * Matte N/A -5% -2%
69R Recograin Rosewood, Quarter Cut, Slip-Matched * Matte N/A
69T Teak Recograin, Quarter Cut, Slip-Matched* Matte N/A
69W Recograin Walnut, Quarter Cut, Slip-Matched * Matte N/A -5% -2%
6A1 White Ash, Quarter Cut, Slip-Matched Matte Ash
6K1 Rift Oak, Rift Cut, Slip-Matched Matte Oak
6K6 Burnt Oak, Rift Cut, Slip-Matched Matte Oak
911 Champagne Maple, Flat Cut, Book-Matched Low Maple
941 Champagne Beech, Flat Cut, Book-Matched Low Beech
942 Sundance Cherry, Flat Cut, Book-Matched Low Cherry
943 Caramel Cherry, Flat Cut, Book-Matched Low Cherry
946 Cocoa Cherry, Flat Cut, Book-Matched Low Cherry
951 Natural Anigre, Quarter Cut, Slip-Matched Low Maple +40% +13%
956 Cocoa Sapele, Quarter Cut, Slip-Matched Low Mahogany
962 Toasted Walnut, Flat Cut, Book-Matched Low Walnut
963 Charred Walnut, Flat Cut, Book-Matched Low Walnut
964 Bronzed Walnut, Flat Cut, Book-Matched Low Walnut
965 Smoked Walnut, Flat Cut, Book-Matched Low Walnut
966 Coffee Walnut, Flat Cut, Book-Matched Low Walnut
967 Smoked Paldao, Quarter Cut, Slip-Matched Low Walnut +15% +5%
968 Figured Sycamore, Quarter Cut, Slip-Matched Low Maple +40% +13%
969 Warm Paldao, Quarter Cut, Slip-Matched Low Walnut +15% +5%
977 Chocolate Ash, Flat Cut, Book-Matched Low Ash
978 Natural Oak, Flat Cut, Book-Matched Low Oak
981 Champagne Hickory, Flat Cut, Book-Matched Low Oak
991 Champagne Ash, Flat Cut, Book-Matched Low Ash
1/2124
98W Recograin Walnut, Flat Cut, Slip-Matched * Low N/A -5% -2%
99A Recograin Frosty Ash,Quarter Cut, Slip-Matched * Low N/A
99G Recograin Wenge, Quarter Cut, Slip-Matched * Low N/A -5% -2%
99K Recograin Oak, Quarter Cut, Slip-Matched * Low N/A -5% -2%
99R Recograin Rosewood, Quarter Cut, Slip-Matched * Low N/A
99T Teak Recograin, Quarter Cut, Slip-Matched* Low N/A
99W Recograin Walnut, Quarter Cut, Slip-Matched * Low N/A -5% -2%
9A1 White Ash, Quarter Cut, Slip-Matched Low Ash
9K1 Rift Oak, Rift Cut, Slip-Matched Low Oak
9K6 Burnt Oak, Rift Cut, Slip-Matched Low Oak
ED Aged Cherry, Flat Cut, Book-Matched Low Cherry
EK Medium Red Walnut, Flat Cut, Book-Matched Low Walnut
ET RecoGrain Natural Ash, Quarter Cut, Slip-Matched * Matte N/A
EU RecoGrain Oak, Quarter Cut, Slip-Matched * Matte N/A
EV RecoGrain Walnut, Quarter Cut, Slip-Matched * Matte N/A
G2U Light Brown Walnut, Flat Cut, Book-Matched Low Walnut
G40 Dark Brown Walnut, Flat Cut, Book-Matched Low Walnut
UX Walnut On Cherry, Flat Cut, Book-Matched Low Cherry
Notes
* Not available on products with a solid edge or with flush, wave, wood, or wood lip pulls.
Natural wood finishes are unstained to maintain the natural beauty and clarity of the wood. When the veneer and solid wood species are not the same, the veneer and solid may differ in color and graining. When a stained wood finish is specified, the solid wood edges are stained to match the veneer top as closely as possible.
Special finish colors may be developed for orders over $200,000 list upon request at no additional charge. A one-time set-up fee of $250 net will be charged on orders under $200,000 list for each special finish. In order to protect the quality and durability of Geiger's finish, the chemical composition of the staining materials, water-base sealers, and urethane top coats will not be altered for special finishes.
Exotic veneers such as pearwood, bird's eye maple and sycamore are available upon request, at additional cost.
For further information and procedures for special finishes or exotic veneers, contact your Geiger sales representative.
Wood Finishes
Upcharge On Painted Products
Specify
Basic Solid Drawer Product Number Depth Width Height Price Edge Box
Freestanding or for use with L and bridge returns
Rectangular Desk • Full Depth Pedestal flush front, 16 1/8" pedestal
left variation
right variation
left variation
right variation
left variation
right variation
Wood Edge Pull Lock Drawer
Rectangular Desks • Single Pedestal • Wood
Tops are 1 1/2" thick wood Top depth does not vary with edge detail Depth dimension includes edge overhang on user and approach sides Use Basic Price when T50 edge detail is specified on top Add Solid Edge upcharge for solid edge details Add Drawer upcharge for wood drawer boxes
approach side
approach side
approach side
RD9W__-3266-A4 32 66 29 4,365 +399 +236 RD9W__-3272-A4 32 72 29 4,512 +423 +236 RD9W__-3278-A4 32 78 29 4,675 +434 +236 RD9W__-3284-A4 32 84 29 4,879 +468 +236
Note: specify L for left or R for right variation
RDCW__-3266-A4 32 66 29 4,304 +399 +236 RDCW__-3272-A4 32 72 29 4,479 +423 +236 RDCW__-3278-A4 32 78 29 4,642 +434 +236 RDCW__-3284-A4 32 84 29 4,823 +468 +236
RDCW__-3866-A4 38 66 29 4,806 +399 +236 RDCW__-3872-A4 38 72 29 4,997 +423 +236 RDCW__-3878-A4 38 78 29 5,156 +434 +236 RDCW__-3884-A4 38 84 29 5,353 +468 +236
01/20Tablet Casegoods
Specify
1/2126
Rectangular Desk • Full Depth Pedestal flush front, 16 1/8" pedestal
left variation
right variation
left variation
right variation
left variation
right variation
approach side
approach side
approach side
Wood Edge Paint Pull Lock Drawer
RD9P__-3266-A4 32 66 29 3,688 +399 +236 RD9P__-3272-A4 32 72 29 3,801 +423 +236 RD9P__-3278-A4 32 78 29 3,937 +434 +236 RD9P__-3284-A4 32 84 29 4,094 +468 +236
RDCP__-3266-A4 32 66 29 3,671 +399 +236 RDCP__-3272-A4 32 72 29 3,818 +423 +236 RDCP__-3278-A4 32 78 29 3,937 +434 +236 RDCP__-3284-A4 32 84 29 4,094 +468 +236
RDCP__-3866-A4 38 66 29 4,094 +399 +236 RDCP__-3872-A4 38 72 29 4,247 +423 +236 RDCP__-3878-A4 38 78 29 4,394 +434 +236 RDCP__-3884-A4 38 84 29 4,553 +468 +236
1/21 27
Specify
Freestanding
Rectangular Desk • Full Depth Pedestals flush front, 16 1/8" pedestals
Rectangular Desk • Recessed Pedestals flush front, 16 1/8" pedestals
Rectangular Desk • Recessed Pedestals stepped front, 16 1/8" pedestals
RDAW-3266-A5A4 32 66 29 5,658 +399 +471 RDAW-3272-A5A4 32 72 29 5,805 +423 +471 RDAW-3278-A5A4 32 78 29 5,969 +434 +471 RDAW-3284-A5A4 32 84 29 6,177 +468 +471
RDAW-3866-A5A4 38 66 29 6,233 +399 +471 RDAW-3872-A5A4 38 72 29 6,409 +423 +471 RDAW-3878-A5A4 38 78 29 6,590 +434 +471 RDAW-3884-A5A4 38 84 29 6,793 +468 +471
RD6W-3266-A5A4 32 66 29 5,190 +399 +471 RD6W-3272-A5A4 32 72 29 5,336 +423 +471 RD6W-3278-A5A4 32 78 29 5,494 +434 +471 RD6W-3284-A5A4 32 84 29 5,703 +468 +471
RD6W-3866-A5A4 38 66 29 5,822 +399 +471 RD6W-3872-A5A4 38 72 29 6,003 +423 +471 RD6W-3878-A5A4 38 78 29 6,177 +434 +471 RD6W-3884-A5A4 38 84 29 6,380 +468 +471
RDDW-3266-A5A4 32 66 29 5,308 +399 +471 RDDW-3272-A5A4 32 72 29 5,455 +423 +471 RDDW-3278-A5A4 32 78 29 5,630 +434 +471 RDDW-3284-A5A4 32 84 29 5,822 +468 +471
RDDW-3866-A5A4 38 66 29 5,941 +399 +471 RDDW-3872-A5A4 38 72 29 6,116 +423 +471 RDDW-3878-A5A4 38 78 29 6,307 +434 +471 RDDW-3884-A5A4 38 84 29 6,500 +468 +471
Rectangular Desks • Double Pedestal • Wood
approach side
approach side
approach side
Specify
1/2128
Rectangular Desks • Double Pedestal • Painted Tablet Casegoods
RDAP-3266-A5A4 32 66 29 4,940 +399 +471 RDAP-3272-A5A4 32 72 29 5,054 +423 +471 RDAP-3278-A5A4 32 78 29 5,202 +434 +471 RDAP-3284-A5A4 32 84 29 5,365 +468 +471
RDAP-3866-A5A4 38 66 29 5,512 +399 +471 RDAP-3872-A5A4 38 72 29 5,658 +423 +471 RDAP-3878-A5A4 38 78 29 5,822 +434 +471 RDAP-3884-A5A4 38 84 29 5,985 +468 +471
RD6P-3266-A5A4 32 66 29 4,553 +399 +471 RD6P-3272-A5A4 32 72 29 4,675 +423 +471 RD6P-3278-A5A4 32 78 29 4,823 +434 +471 RD6P-3284-A5A4 32 84 29 4,981 +468 +471
RDDP-3266-A5A4 32 66 29 4,687 +399 +471 RDDP-3272-A5A4 32 72 29 4,806 +423 +471 RDDP-3278-A5A4 32 78 29 4,940 +434 +471 RDDP-3284-A5A4 32 84 29 5,099 +468 +471
RDDP-3866-A5A4 38 66 29 5,235 +399 +471 RDDP-3872-A5A4 38 72 29 5,381 +423 +471 RDDP-3878-A5A4 38 78 29 5,528 +434 +471 RDDP-3884-A5A4 38 84 29 5,692 +468 +471
Freestanding
Rectangular Desk • Full Depth Pedestals flush front, 16 1/8" pedestals
Rectangular Desk • Recessed Pedestals flush front, 16 1/8" pedestals
Rectangular Desk • Recessed Pedestals stepped front, 16 1/8" pedestals
approach side
approach side
approach side
1/21 29
Specify
Arc Front Desk • Recessed Pedestal flush front, 16 1/8" pedestals
left variation
right variation
Arc Front Desk • Recessed Pedestal stepped front, 16 1/8" pedestals
left variation
Arc Front Desks • Single Pedestal • Wood
RDEW__-4266-A4 42 66 29 5,420 +434 +236 RDEW__-4272-A4 42 72 29 5,658 +480 +236 RDEW__-4278-A4 42 78 29 5,884 +515 +236 RDEW__-4284-A4 42 84 29 6,132 +551 +236
Specify
1/2130
Arc Front Desks • Single Pedestal • Painted Tablet Casegoods
RDEP__-4266-A4 42 66 29 4,716 +434 +236 RDEP__-4272-A4 42 72 29 4,907 +480 +236 RDEP__-4278-A4 42 78 29 5,117 +515 +236 RDEP__-4284-A4 42 84 29 5,336 +551 +236
approach side
approach side
Arc Front Desks • Single Pedestal • Painted
left variation
right variation
left variation
right variation
1/21 31
Specify
Basic Solid Drawer Product Number Depth Width Height Price Edge Box RD8W-4266-A5A4 42 66 29 6,443 +434 +471 RD8W-4272-A5A4 42 72 29 6,663 +480 +471 RD8W-4278-A5A4 42 78 29 6,896 +515 +471 RD8W-4284-A5A4 42 84 29 7,160 +551 +471
RDFW-4266-A5A4 42 66 29 6,556 +434 +471 RDFW-4272-A5A4 42 72 29 6,781 +480 +471 RDFW-4278-A5A4 42 78 29 7,029 +515 +471 RDFW-4284-A5A4 42 84 29 7,277 +551 +471
approach side
approach side
Freestanding
Specify
1/2132
approach side
approach side
Arc Front Desks • Double Pedestal • Painted
RDFP-4266-A5A4 42 66 29 5,850 +434 +471 RDFP-4272-A5A4 42 72 29 6,042 +480 +471 RDFP-4278-A5A4 42 78 29 6,252 +515 +471 RDFP-4284-A5A4 42 84 29 6,471 +551 +471
Freestanding
1/21 33
Specify
Bullet Desks • Wood
Wood Edge Leg
Tops are 1 1/2" thick wood Top depth does not vary with edge detail Depth dimension includes edge overhang on user and approach sides Use Basic Price when T50 edge detail is specified on top Add Solid Edge upcharge for solid edge details
For use with L and bridge returns
Bullet Desk • L Panel and Wood or Metal Leg
left variation
right variation
left variation
right variation
RD1W__-3266 32 66 29 2,447 +587 RD1W__-3272 32 72 29 2,564 +632 RD1W__-3278 32 78 29 2,671 +680 RD1W__-3284 32 84 29 2,758 +715 RD1W__-3866 38 66 29 2,768 +632 RD1W__-3872 38 72 29 2,892 +680 RD1W__-3878 38 78 29 3,006 +715 RD1W__-3884 38 84 29 3,140 +739
Specify
1/2134
Bullet Desks • Painted
Wood Edge Paint Leg
Bullet Desk • L Panel and Wood or Metal Leg
left variation
right variation
left variation
right variation
RD1P__-3266 32 66 29 2,243 +587 RD1P__-3272 32 72 29 2,362 +632 RD1P__-3278 32 78 29 2,463 +680 RD1P__-3284 32 84 29 2,554 +715 RD1P__-3866 38 66 29 2,520 +632 RD1P__-3872 38 72 29 2,638 +680 RD1P__-3878 38 78 29 2,758 +715 RD1P__-3884 38 84 29 2,892 +739
1/21 35
Specify
Ellipsoid Desks • Wood
Ellipsoid Desk • L Panel and Wood or Metal Leg
left variation
right variation
left variation
right variation
Wood Edge Leg
Specify
1/2136
Ellipsoid Desks • Painted
Ellipsoid Desk • L Panel and Wood or Metal Leg
left variation
right variation
left variation
right variation
Wood Edge Paint Leg
1/21 37
Specify
Conference Desk • L Panel and Wood or Metal Leg
left variation
right variation
left variation
right variation
Conference Desks • Wood
Wood Edge Leg
RDNW__-3278 32 78 29 3,152 +715 RDNW__-3284 32 84 29 3,288 +739 RDNW__-3878 38 78 29 3,496 +739 RDNW__-3884 38 84 29 3,671 +762
Conference round is 44" diameter on 32" deep desk, and 50" diameter on 38" deep desk
RDOW__-3278 32 78 29 3,581 +715 RDOW__-3284 32 84 29 3,790 +739 RDOW__-3878 38 78 29 3,891 +739 RDOW__-3884 38 84 29 4,173 +762
Specify
1/2138
Conference Desk • L Panel and Wood or Metal Leg
left variation
right variation
left variation
right variation
Wood Edge Paint Leg
RDNP__-3278 32 78 29 2,949 +715 RDNP__-3284 32 84 29 3,078 +739 RDNP__-3878 38 78 29 3,241 +739 RDNP__-3884 38 84 29 3,423 +762
RDOP__-3278 32 78 29 2,949 +715 RDOP__-3284 32 84 29 3,140 +739 RDOP__-3878 38 78 29 3,231 +739 RDOP__-3884 38 84 29 3,462 +762
1/21 39
Specify
Basic Solid Drawer Product Number Depth Width Height Price Edge Box RE2W-3636 36 36 29 2,226 +434 RE2W-4242 42 42 29 2,655 +505
RE2W__-3648 36 48 29 2,638 +434
RE3W-3636 36 36 29 2,226 +434 RE3W-4242 42 42 29 2,655 +505
RE3W__-3648 36 48 29 2,638 +434
Note: specify L for left or R for right variatio
Corner Unit • Straight with one large grommet
Corner Unit • Straight with one large grommet
left variation
right variation
left variation
right variation
Corner Units • Closed • Wood
Left variation unit accepts 24 1/2" deep return on right, 30 1/2" deep return on left Right variation unit accepts 24 1/2" deep return on left, 30 1/2" deep return on right User side is 20" wide
Accepts two 24 1/2" deep returns User side on 36" x 36" unit is 15 1/2" wide User side on 42" x 42" unit is 24" wide
Wood Edge Grommet
Tops are 1 1/2" thick wood Closed corner unit backs are finished Edge detail is included on user and return sides Electrical access door is included; see specification notes for additional information Use Basic Price when T50 edge detail is specified on top Add Solid Edge upcharge for solid edge details
Specify
1/2140
Corner Units • Closed • Painted
left variation
right variation
left variation
right variation
Wood Edge Paint Grommet
Tops are 1 1/2" thick wood Closed corner unit backs are finished Edge detail is included on user and return sides Electrical access door is included; see specification notes for additional information Use Basic Price when T50 edge detail is specified on top Add Solid Edge upcharge for solid edge details
RE2P-3636 36 36 29 1,877 +434 RE2P-4242 42 42 29 2,226 +505
RE2P__-3648 36 48 29 2,216 +434
RE3P-3636 36 36 29 1,877 +434 RE3P-4242 42 42 29 2,226 +505
RE3P__-3648 36 48 29 2,216 +434
1/21 41
Specify
RE4W__-3636 36 36 29 2,993 +434 RE4W__-4242 42 42 29 3,406 +505
RE6W__-3648 36 48 29 3,388 +505
RE8W__-3648 36 48 29 3,388 +505
Corner Unit • Straight • Electrical Access Door with one large grommet
Corner Units • Straight • Electrical Access • Wood
left variation (hinge on left)
right variation (hinge on right)
Wood Edge Grommet
Tops are 1 1/2" thick wood Corner unit backs with electrical access are unfinished Edge detail is included on user and return sides Electrical access door is included; see specification notes for additional information Use Basic Price when T50 edge detail is specified on top Add Solid Edge upcharge for solid edge details
Specify
1/2142
Corner Units • Straight • Electrical Access • Painted
RE4P__-3636 36 36 29 2,598 +434 RE4P__-4242 42 42 29 2,949 +505
RE6P__-3648 36 48 29 2,937 +505
RE8P__-3648 36 48 29 2,937 +505
1/21 43
Specify
RE5W__-3636 36 36 29 2,993 +434 RE5W__-4242 42 42 29 3,406 +505
RE7W__-3648 36 48 29 3,388 +505
RE9W__-3648 36 48 29 3,388 +505
Corner Unit • Curved • Electrical Access Door with one large grommet
Corner Units • Curved • Electrical Access • Wood
Wood Edge Grommet
right variation (hinge on left)
Specify
1/2144
Corner Units • Curved • Electrical Access • Painted Tablet Casegoods
RE5P__-3636 36 36 29 2,598 +434 RE5P__-4242 42 42 29 2,949 +505
RE7P__-3648 36 48 29 2,937 +505
RE9P__-3648 36 48 29 2,937 +505
Corner Units • Curved • Electrical Access • Painted
1/21 45
Specify
L Returns • Closed • Wood
Wood Edge Grommet
Tops are 1 1/2" thick wood; closed return backs are finished Edge detail is included on user side; attaching end includes mating edge Top depth varies with edge detail; add edge overhang for total top depth Returns 19 1/2" deep are not for use with corner units Use Basic price when T50 edge detail is specified on top Add Solid Edge upcharge for solid edge details
For use with desks and corner units
L Return • Closed with one small grommet, no pedestal
left variation
right variation
RQNW__-2030 19 1/2 30 29 1,402 +143 RQNW__-2036 19 1/2 36 29 1,549 +165 RQNW__-2042 19 1/2 42 29 1,684 +177 RQNW__-2048 19 1/2 48 29 1,842 +211
Specify
1/2146
For use with desks and corner units
L Return • Closed with one small grommet, no pedestal
left variation
right variation
L Returns • Closed • Painted
RQNP__-2030 19 1/2 30 29 1,149 +143 RQNP__-2036 19 1/2 36 29 1,256 +165 RQNP__-2042 19 1/2 42 29 1,373 +177 RQNP__-2048 19 1/2 48 29 1,520 +211
Tops are 1 1/2" thick wood; closed return backs are finished Edge detail is included on user side; attaching end includes mating edge Top depth varies with edge detail; add edge overhang for total top depth Returns 19 1/2" deep are not for use with corner units Use Basic price when T50 edge detail is specified on top Add Solid Edge upcharge for solid edge details
1/21 47
Specify
L Returns • Open • Wood
RQ1W__-2042-A4 19 1/2 42 29 2,068 +177 +236 RQ1W__-2048-A4 19 1/2 48 29 2,136 +211 +236 RQ1W__-2054-A4 19 1/2 54 29 2,216 +224 +236 RQ1W__-2060-A4 19 1/2 60 29 2,272 +247 +236
Wood Edge Pull Lock Grommet Drawer
Tops are 1 1/2" thick wood; closed return backs are finished Edge detail is included on user side; attaching end includes mating edge Top depth varies with edge detail; add edge overhang for total top depth Returns 19 1/2" deep are not for use with corner units Use Basic price when T50 edge detail is specified on top

tablet casegoods price book - geiger

Documents