tai milano s.p.a. - mrm technical services incmrmuk.com/brochures/tai-presentation.pdf · our...

43
TAI MILANO S.p.A.

Upload: dangphuc

Post on 06-Feb-2018

215 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

TAI MILANO S.p.A.

Page 2: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for industry in general and, in particular, for the petrochemical, chemical and refining industry, power boilers and steam plants.

Our Milan office has approximately 1,000 m2 of floor space and is situated close to the Central Station.

Our factory, located in Guardamiglio near Piacenza, occupies a total of 13,000 m2 comprising a covered area of 6,500 m2 and is modernly equipped to handle a monthly production of 600 valves.

The range of types, dimensions and ratings is vast and can satisfy the most varied and complex requirements.

Our Company TAI MILANO S.p.A.

Page 3: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

In addition, we have a sales representation and manufacturing agreements for Italy which permits us to furnish rupture discs, safety heads and safety valve/rupture disc combinations.

Quality is guaranteed by our Company's quality system, which is operated by highly qualified personnel under the guidance of authoritative management in accordance with ISO 9001.

Experience, combined with the importance given to research, experimental work and the quality of our products have classed the company as one of the most important and innovative manufactures of these types of valves in the European market.

Following results of tests and controls, our valves have been approved by ISPESL (ex ANCC), RINA, Lloyds Register of Shipping, DNV, Polish, Chinese and Russian Authorities).

In addition TAI MILANO S.p.A.

Page 4: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Product Range

Relief Valves – Pilot OperatedSeries 9000

Relief Valves – Spring Loaded

Steam ValvesSeries 200

Gas and Liquid ValvesSeries 3000Series 4000Series 5000

Relief Valves – Electrically ActuatedSeries 100

Changeover ValvesSeries 1000

TAI MILANO S.p.A.

Page 5: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Pilot Operated Safety ValvesSeries 9000

Pilot Operated Valves suitable for Liquid and Gas applications.

Main Features

Inlet Sizes: Up to 14”Orifice Sizes: D to V inclusiveSet Pressure Range: 0.3 to 520 bar gTemperature Range: minus 60 to 232° COverpressure Range: 1 to 5%Materials: Carbon or Stainless

Steel or Special alloys

Fixed or Adjustable Blowdown (2% min) with FullNozzle design.

Face to centre dimensions conforming to API

Std. 526 available.

TAI MILANO S.p.A.

Page 6: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Series 9000

TAI MILANO S.p.A.

Page 7: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Series 9000

TAI MILANO S.p.A.

Page 8: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Series 9000

TAI MILANO S.p.A.

Page 9: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Series 9000

TAI MILANO S.p.A.

Page 10: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Series 9000

TAI MILANO S.p.A.

Page 11: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

9000+CV

TAI MILANO S.p.A.

Page 12: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Change Over ValvesSeries 1000

Main Features

Inlet Sizes: 1” to 14”Ratings: ASME 150 to ASME 600Materials: Carbon Steel,

Stainless Steel or Duplex

Also available with interlocking system.

TAI MILANO S.p.A.

Page 13: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Steam Safety ValvesSeries 200

High pressure steam safety valves with inlet flanged or prepared for butt welding.

Main Features

Inlet Sizes: Up to 6”Orifice Size: G to R inclusiveSet Pressure Limit: 320 bar gTemperature Limit: 543° COverpressure Range: 3%Materials: Carbon or Stainless

Steel or Special alloys.

Adjustable Blowdown (4% max) with Full Nozzledesign.Lifting Lever and Test Gag are supplied asstandard accessories.

TAI MILANO S.p.A.

Page 14: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Series 200

TAI MILANO S.p.A.

Page 15: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Conventional or Bellows Type ValvesSeries 3000

Conventional spring loaded or bellows sealed safety valves with flanged inlet and outlet connections.

Main Features

Inlet Sizes: Up to 8”Orifice Sizes: D to T inclusiveSet Pressure Range: 0.5 to 420 bar gTemperature Range: minus 267 to 540° COverpressure Range: 10%Materials: Carbon or Stainless

Steel or Special alloys.

Adjustable Blowdown (5% of set pressure or 0.15 kgf/cm²)with Full Nozzle design.

Lifting Lever and Test Gag are supplied asstandard accessories.

TAI MILANO S.p.A.

Page 16: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Series 3000

TAI MILANO S.p.A.

Page 17: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Series 3000

TAI MILANO S.p.A.

Page 18: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Conventional or Bellows Type ValvesSeries 4000

Conventional spring loaded or bellows sealed safety valves with inlet & outlet connections screwed or flanged.

Main Features

Inlet Sizes: Up to 2”Orifice Sizes: e to h inclusiveSet Pressure Range: 0.3 to 430 bar gTemperature Range: minus 200 to 400° COverpressure Range: 10%Materials: Carbon or Stainless

Steel or Special alloys.

Adjustable Blowdown (5% of set pressure or 0.15 kgf/cm²)with Full Nozzle design.

Lifting Lever and Test Gag are supplied asstandard accessories.

TAI MILANO S.p.A.

Page 19: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Conventional or Bellows Type ValvesSeries 5000

Conventional spring loaded or bellows sealed safety valves with flanged inlet and outlet connections and designed specifically for High Back Pressure Applications.

Main Features

Inlet Sizes: 4” , 6” and 8”Orifice Sizes: P to T inclusiveSet Pressure Range: 28 to 108 bar gTemperature Range: minus 60 to 300° COverpressure Range: 10 to 25%Materials: Carbon or Stainless

Steel or Special alloys.

Lifting Lever and Test Gag are supplied asstandard accessories.

TAI MILANO S.p.A.

Page 20: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Series 5000

TAI MILANO S.p.A.

Page 21: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Electrically Operated ValvesSeries 100

Electrically Operated safety valves for steam service with inlet flanged or prepared for butt welding and flanged outlet connection.

Since valve is solenoid operated via a pressure switch, alternative operating system can be provided utilising signal from pressure transmitter via Distributed Control System.

Main Features

Inlet Sizes: Up to 6”Set Pressure Limit: 310 bar gTemperature Limit: 543° COverpressure Range: NoneMaterials: Carbon or Stainless

Steel or Special alloys.

TAI MILANO S.p.A.

Page 22: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Series 100

TAI MILANO S.p.A.

Page 23: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Commercial NetworkABU DHABI

PETROPROJECTS GROUPMr. Munther QuzeihaP.O. Box 7833 Abu DhabiTel.: +971 2 6660554Fax: +971 2 6668013

GREECEADOPTA LTD.Mr. P. Charbilas17 Aiginis Str. & Strofiliou Str14561 KifissiaTel.: +30 1 7225052Fax: +30 1 8077486

CROATIAPANONMr. VukelicA. Stipancica 24/110000 ZagrebTel.: +385 1 6522775Fax: +385 1 6522774

IRANIRAN OFOGH INDUSTRIAL DEVELOPMENT CO.Mr. Shakoorian32 Yeganeh StreetNorth Iranshahr Tehran 15847Tel.: +98 21 8828518 / 8824808Fax: +98 21 832910

EGYPTTAWAKOL ENTERPRISESMr. A.A. Tawakol70 El Thawra StreetHeliopolis, Cairo 11341Tel.: +20 2 291 6482Fax: +20 2 291 7985

JORDANCONTRACTING & DEVELOPMENT COMr. Hikmat KhimmashP.O. Box 6147 Jabal Amman,First Circule nr. Iraqi Embassy AmmanTel.: +962 6 4625261 / 4637314Fax: +962 6 4629431

TAI MILANO S.p.A.

Page 24: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Commercial NetworkMALAYSIA

HEXAMAS SDN BHDMr. Faisal Siebel - Technical Director28, Jalan Sibu 8Taman Wahyu, Off Jalan Ipoh68100 Kuala LumpurTel.: +603 626 2788Fax: +603 626 3788

SPAINIESSEBIMr. GambaC. Juan B. Zabala 348990 Algorta (Vizcaya)Tel.: +34 4 4910612Fax: +34 4 4609170

NETHERLANDSHITMA B.V.MR. Lester MillardMR. Edvin StevenAnton Philipsweg, 1Postbus 1751420 AD UithoornTel.: +31 297 515111Fax: +31 297 514777

SPAINVALVULAS NACIONALMr. J. M. AlvesPoligono Industrial Can JardiAptdo. 123 DP 08191 Rubi (Barcelona)Tel.: +34 936 995200Fax: +34 936 974556

NORWAYFLOCHEM A/SMr. Herlog BergeGamle Drammensvei 48P.B. 15 N-1321 StabekkTel.: +47 675 16700Fax: +47 675 16701

SINGAPOREPNR ENGINEERING Pte LtdMr. Tan Good Swee35 Tannery Road, #11-10 Tannery Block,Ruby Industrial Complex 347740, SingaporeTel.: +65 7428911Fax: +65 7428700

TAI MILANO S.p.A.

Page 25: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Commercial NetworkSULTANATE OF OMAN

ARABIAN ENGINEERING SERVICES LLCMr. A.A. NomaniP.O. Box 3000Ruwi, Postal Code 112Tel.: +968 560475Fax: +968 560486

UNITED KINGDOMTAI MILANO AREA OFFICEMr. Mike MacGregor2 Quoits Field, ClaydonIpswich IP6 0AYTel.: +44 1473 830000Fax: +44 1473 831020E-Mail: [email protected]: www.mrmuk.com

TAI MILANO S.p.A.

Page 26: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our Bars Stock

TAI MILANO S.p.A.

Page 27: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our Springs Stock

TAI MILANO S.p.A.

Page 28: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our Castings Stock

TAI MILANO S.p.A.

Page 29: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our Castings Stock

TAI MILANO S.p.A.

Page 30: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our Packing Department

TAI MILANO S.p.A.

Page 31: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our CNC Machines

TAI MILANO S.p.A.

Page 32: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our CNC Machines

TAI MILANO S.p.A.

Page 33: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our CNC Machines

TAI MILANO S.p.A.

Page 34: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our CNC Machines

TAI MILANO S.p.A.

Page 35: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our CNC Machines

TAI MILANO S.p.A.

Page 36: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our CNC Machines

TAI MILANO S.p.A.

Page 37: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our CNC Machines

TAI MILANO S.p.A.

Page 38: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our CNC Machines

TAI MILANO S.p.A.

Page 39: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our Lapping & Stelliting Facilities

TAI MILANO S.p.A.

Page 40: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our Hydrotesting Facilities

TAI MILANO S.p.A.

Page 41: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our Control DepartmentSurface control & hardness machine Profile Projector

TAI MILANO S.p.A.

Page 42: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

Our Assembling Facilities

TAI MILANO S.p.A.

Page 43: TAI MILANO S.p.A. - MRM Technical Services Incmrmuk.com/brochures/tai-presentation.pdf · Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for

THANK YOU FOR YOUR ATTENTIONTHANK YOU FOR YOUR ATTENTION

TAI MILANO S.p.A.Via Petrella 21 - 20124 MILANO (ITALY)Tel.: +39 02 29525941 - Fax: +39 02 29404417WEB: www.taimilano.it - Email: [email protected]