tamil nadu tourism development corporation limited tamil
TRANSCRIPT
1 | P a g e
Tamil Nadu Tourism Development Corporation Limited
Tamil Nadu Tourism Complex,
Wallajah Road, Chennai –600 002
INVITATION FOR BIDS (TWO COVER SYSTEM)
Bid Invitation No : 808/Engg/TTDC/2017 Date: 21.08.2017
Contract Title : “Pilgrimage Rejuvenation and Spiritual Augmentation Drive” (PRASAD) for
Velankanni in Tamil Nadu.
Development of Velankanni
1. The Tamil Nadu Tourism Development Corporation Limited has received financial assistance from
Govt. of India (GOI) for implementation of “Pilgrimage Rejuvenation and Spiritual Augmentation
Drive” (PRASAD) for Velankanni in Tamil Nadu. The Part of this financial assistance from
Government of India will be utilized for eligible payments under the Contract named above.
2. For and on behalf of Tamil Nadu Tourism Development Corporation Limited, superscribed sealed
tenders under “Two bid” system namely “Technical bid” and “price bid” are invited from the
registered Civil Contractors with Public Works Department, Central Public Works Department or any
other State / Central Government Undertaking for the following works and the bidder should meet the
following requirement :-
Sl.
No Name of Work
Cost of
Tender
Document
Earnest
Money
Deposit
Period of
Contract
Eligibility / class of
Registration
1. Pilgrimage Rejuvenation and
Spiritual Augmentation Drive
(PRASAD) for Development of
Velankanni
Est. Amt. Rs.442.00 lakhs
Rs. 15,000/-
+ GST 18% Rs.4,00,000/- 18 months
Class I registration
with GST
(Refer Bid Document)
I. Velankanni Beach
Providing paver block road
II. Bus Stand
Construction of toilet block
III. Improvement of Oorani
Mariamman Kulam
a. Compound wall
b. Retaining wall
c. Pathway with handrails
d. Toilet
e. Lighting poles
f. Seating benches
IV. City Level Interventions
Street lighting
However, for complete eligibility and qualification requirements refer to Evaluation and Qualification
of the bidding document.
2 | P a g e
3. Eligibility criteria: Details furnished in Instruction to bidders of Volume I and for other conditions
refer bid document.
4. Interested Bidders may inspect the Bidding Document and obtain further information from the office
of The Chairman & Managing Director, Tamil Nadu Tourism Development Corporation Limited,
Tamil Nadu Tourism Complex, Wallajah Road, Chennai –600 002
5. A complete set of the Bidding Document in English language may be purchased by interested Bidders
on submission of a written application to “The Chairman & Managing Director, Tamil Nadu Tourism
Development Corporation Limited” address given above, on payment of a non-refundable document
fee of INR 15,000 (Rupees fifteen thousand only) plus 18% GST for the Contract package
separately, only in the form of Demand Draft (Indian Rupees only) during 10:00 hours to 17:00
hours on all working days starting from 21.08.17 to 20.09.17.
6. Further the Bidding Document may also be downloaded from the website www.tenders.tn.gov.in
and www.tamilnadutourism.org . The method of payment of document fee will be in the form of
Demand Draft in favour of “The Chairman & Managing Director, Tamil Nadu Tourism
Development Corporation Limited” payable at Chennai. In case the Bidding Document is
downloaded from the website, the document fee has to be paid along with the Bid as a separate
instrument other than that of Bid security.
7. Sealed Bids must be delivered at the address above on or before 21.09.17 (15:00 hours). Technical
bid must be accompanied by a Bid Security in requisite form for an amount as indicated in Bid data of
the bid document. The EMD / Bid Security shall be in the form of “Bank Guarantee‟ and “Fixed
Deposit Receipt‟. The Fixed Deposit Receipt Shall be drawn in favour of “The Chairman &
Managing Director, Tamil Nadu Tourism Development Corporation Limited”, payable at
Chennai.
8. Late bids shall be rejected. Technical Bids will be opened on the same day 21.09.17 (15:30 hours) in
the presence of the bidders or bidder’s representatives who choose to attend. In the event of the
specified date of bid submission/opening being declared a holiday for the Employer, the bids shall be
received and opened at the same time and place on the next working day
9. The Employer will not be responsible for any costs or expenses incurred by Bidders in connection
with the preparation or delivery of Bids.
10. The Employer reserves the right to accept or reject any bid, and to annul the bidding process and
reject all bids at any time prior to contract award, without thereby incurring any liability to Bidders.
11. Pre-bid meeting with the Bidders will be held at Office of The Chairman & Managing Director,
Tamil Nadu Tourism Development Corporation Limited, Tamilnadu Tourism complex, at No.2
Wallajah Road, Chennai –600 002 on 30.08.17 at 11:00 hours & 12:00 hours for this Contract
Package only. Bidders interested in participating in the pre bid meeting are advised to attend the
same.
12. Bidders are encouraged to visit the site, at their own cost, before the pre-bid meeting /submission of
bid. Bidders may visit the respective sites from 21.08.17 to 19.09.17 for this Package during 10:00
3 | P a g e
hours to 17:00 hours. A list of contact officers may be obtained from the office addresses given
above.
-S/d-
CHAIRMAN AND MANAGING DIRECTOR
Tamilnadu Tourism Development Corporation Ltd., Chennai 600 002 TAMILNADU
Tamil Nadu, India Phone No: 044-25367851-54
4 | P a g e
BIDDING DOCUMENT
For Procurement of the work of
Pilgrimage Rejuvenation& Spiritual Augmentation Drive” (PRASAD) for
Velankanni in Tamilnadu. Works comprising;
Providing Paver Block Road, Construction of Toilet Block, and
Providing Improvement works to MariammanKoil Kulam& Street
Lighting in Velankanni inNagapattinam District (Single Stage Two Cover System)
Volume 2- Price BID
Issued on :
Invitation for Bids No. :
Package No. :
Employer: The Chairman & Managing Director,
Tamil Nadu Tourism Development Corporation Limited,
Tamil Nadu Tourism Complex,
2, Wallajah Road,Chennai – 600 002,
Tamil Nadu
Telephone: +91- 44- 25333851-85Email:[email protected],
5 | P a g e
Letter of Price Bid
Contract Package No. :
Invitation Bid No. : Date:
Title of contract :Pilgrimage Rejuvenation & Spiritual Augmentation Drive” (PRASAD)
for Velankanni in Tamilnadu. Providing Paver Block Road, Construction
of Toilet Block, and Providing Improvement works to Mariamman- Koil
Kulam & Street Lighting
To:
………………………………………………………………………………………………………………
………………………………………………………………………………………………………………
………………………………………………………………………………………………………………
We, the undersigned, declare that:
a) We have examined and have no reservations to the Bidding Documents, including Addenda
issued in accordance with Instructions to Bidders (ITB) 8;
b) We offer to execute in conformity with the Bidding Documents the following Works:
c) The total price of our Bid, excluding any discounts offered in item (d) below is:
d) The discounts offered and the methodology for their application is:
e) Our Bid shall be valid for a period of . . . . . days from the date fixed for the bid submission
deadline in accordance with the Bidding Documents, and it shall remain binding upon us and may
be accepted at any time before the expiration of that period;
f) If our Bid is accepted, we commit to obtain a performance security in accordance with the
Bidding Documents;
g) We have paid, or will pay the following commissions, gratuities, or fees with respect to the
bidding process or execution of the Contract: **
Name of Recipient Address Reason Amount
………………………………………………………………………………………………………………
………………………………………………………………………………………………………………
……………………………………………………………………………………………………………….
h) We understand that this bid, together with your written acceptance thereof included in your
notification of award, shall constitute a binding contract between us, until a formal contract is
prepared and executed; and
6 | P a g e
i) We understand that you are not bound to accept the lowest evaluated bid or any other bid that you
may receive.
j) We agree to permit Government of India or its representative to inspect our accounts and records
and other documents relating to the bid submission and to have them audited by auditors
appointed by GOI.
k) If awarded the contract, the person named below shall act as Contractor’s Representative.
Name ……………………………………………………………………………………………………….
In the capacity of ……………………………………………………………………………………………
Signed ………………………………………………………………………………………………………
Duly authorized to sign the Bid for and on behalf of ……………………………………………………….
Date …………………………………………………………………………………………………………
** If none has been paid or is to be paid, indicate “none”
7 | P a g e
Name of Work:-Pilgrimage Rejuvenation & Spiritual Augmentation Drive” (PRASAD) for Velankanni in
Tamilnadu Invitation of Bid No:
Contract Package No: Development of Velankanni under PRASAD Scheme (Pilgrimage Rejuvenation and Spiritual Augmentation Drive)
Name of Bidder &
Address
Schedule A
Sl.
No. Qty Description of Work
TNDSS
No
Rate in Rupees Unit in
Figure and
in words
Amount in
Rs. In
Figure
In Words
1 2909.00 Earth work excavation for foundation in all
soils and sub-soils and to full depth as may be
directed except in rock requiring blasting
inclusive of shoring shuttering, bailing out
water wherever necessary and depositing the
surplus earth within the compound in places
shown by the departmental officers with an
initial lead of 10 mts. and initial lift of 2 mts.
and clearing and levelling the site, etc.,
complete complying with standard
specification.
23 &
24
V, VI
S2
- 1M³(One
Cubic
Metre)
-
2 490.00 Refilling with excavated earth other than sand
with an initial head load of 100 mts. and
depositing the earth as shown by the
departmental officers in layers of not more
than 15 cm thick well rammed, watered and
consolidated etc. complete complying with
standard specification
24 &
25 V,
VI
S2
- 1M³(One
Cubic
Metre)
-
8 | P a g e
3 309.00 Supplying and filling in foundation, basement,
etc. with filling sand in layers of not more than
15 cm thick well watered, rammed and
consolidated etc. complete complying with
standard specification and as directed by the
departmental officers.
24 &
25 V,
VI
S2
- 1M³(One
Cubic
Metre)
-
4 1362.00 Supply delivery and filling of quarry rubbish in
layer of not more than 15cm thick including
watering with all layers and consolidation
complying with standard specifications
including cost and conveyance of all materials
and labour charges etc., complete
24 &
25 V,
VI
S2
- 1M³(One
Cubic
Metre)
-
5 258.00 Supply delivery and filling of gravel in layer of
not more than 15cm thick including watering
with all layers and consolidation complying
with standard specifications including cost and
conveyance of all materials and labour charges
etc., complete
37 B - 1M³(One
Cubic
Metre)
-
6 3415.00 Providing and laying of 80mm thick high
strength type conforming IS 15658-2006 of
rubberized interlocking paver block in required
sizes of minimum compressive strength of 40
N/mm2 in uniform shape of approved make to
be laid in flurrying bone pattern with approved
non-sticking surface in the top and the rate
including levelling the base preparation of sub
base with stone dust cushion 100mm thick,
laying out the pavement cut the pieces to fit the
edge, vibrating the pavers, sweeping
transporting, loading unloading and laying of
paver block as per standard specification.-10
Sq.m
SS - 1M² (One
Square
Metre)
-
9 | P a g e
7 710.00 Cement Concrete 1:4:8 (One part of cement,
four part of fine aggregate and eight part of
course aggregate) mix using 40mm HBG ISS
metal from approved quarry including cost and
conveyance of all materials to site and labour
charges, including dewatering if found
necessary and laid in layers of not more than
15cm thick and compacted etc., complete
complying with standard specifications as
directed by the departmental officers
28
V, VI
S2
(SS.A)
VII
- 1M³(One
Cubic
Metre)
-
8 0.00 Supplying and erecting cantering for sides and
soffits including necessary supports and
strutting upto 3.29 M height for plane surfaces
as detailed below in all floors with all cross
bracings using Mild Steel sheets of size 90 x 60
cm and 10 BG stiffened with welded Mild Steel
angle of size 25mm x 25mm x 3 mm for
boarding laid over silver oak joists of size 10cm
x 6.50 cm spaced at above 90 cm centre to
centre and supported by casurina props of 10cm
to 13 cm dia spaced at not more than 75 cm
centre to centre etc. complete complying with
the standard specification. (Payment for
cantering shall be given after the concrete is
laid)
30(S)
86 86
A V, VI
(S3)
VII
-
a) 888.00 Footing and Plinth - 1M² (One
Square
Metre)
-
b) 436.00 Cantering for soffits of RCC slabs - 1M² (One
Square
Metre)
-
10 | P a g e
c) 2842.00 For vertical Surfaces - 1M² (One
Square
Metre)
-
d) 310.00 Rate for RCC Square or rectangular column
and wall top & bottom slab of boxing sill slab
sunshade with necessary facia etc., complete
complying with standard specifications.
- 1M² (One
Square
Metre)
-
9 Providing and laying in position, Standardised
Concrete Mix M-25 Grade in accordance with
IS:456-2000, using 20mm and downgraded
hard broken granite stone jelly for all RCC
items of works with minimum cement content
of 350 kg/mᶾ and maximum water cement ratio
of 0.50, including admixture (plasticiser / super
plasticiser) in recommended proportions as per
IS:9103 to accelerate, retard setting of concrete,
improve workability without impairing strength
and durability with about (5.0 cu.m.) 7730 kg.
Of 20mm machine crushed stone jelly and with
about (3.3 cu.m.) 5156 kg. Of 10-12mm
machine crushed stone jelly and with about
(4.79 cu.m.) 7670 kg. of sand, but excluding
cost of reinforcement grill and fabricating
charges, cantering and shuttering and also
including laying, vibrating with mechanical
vibrators, finishing, curing, etc. and providing
fixtures like fan clamps in the RCC floor/ roof
slabs wherever necessary without claiming
extra, etc., complete complying with standard
specification and as directed by the
departmental officers. The coarse and fine
aggregates to be used should comply with the
requirements of IS Standards. (No separate
payment will be made by the Department for
30 -
11 | P a g e
the excess usage of materials).
a) 386.00 Foundation and Basement - 1M³
(One Cubic
Metre)
-
b) 69.00 For Ground Floor - 1M³
(One Cubic
Metre)
-
12 | P a g e
c) 1208.00 Add the basic rate for works above 1.50m depth
and upto 4.5m depth below ground level
- 1M³
(One Cubic
Metre)
-
c) 10.00 For First Floor - 1M³
(One Cubic
Metre)
-
10 1255.00 Supplying, fabricating and placing in position
Mild Steel / Ribbed Tor Steel grills for all RCC
works as per design given including cost of
steel and G.I. binding wire in all floors etc.
complete complying with standard
specification. (Contractor has to make his own
arrangements for the supply of steel and
binding wire)
SS 86
& 86 A
V, VI
(S3)
(S6)
VII
- 1Qtl
(One
Quintal)
-
11 Brick work in Cement Mortar 1:5 using best
quality of Second Class Ground Moulded
Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for
foundation and basement including curing, etc.,
complete complying with standard
specification.
31 -
a) 76.00 Up to Plinth Level - 1M³
(One Cubic
Metre)
-
b) 180.00 In Super Structure Ground Floor - 1M³
(One Cubic
Metre)
-
13 | P a g e
c) 70.00 Brick work in Cement Mortar 1:3 using best
quality of Second Class Ground Moulded
Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for
foundation and basement including curing, etc.,
complete complying with standard specification
in Partition Wall
- 1M² (One
Square
Metre)
-
12 1635.00 Plastering with Cement Mortar 1:5 (One
cement and Five sand), 12mm thick in all floors
including curing etc. complete complying with
standard specification and as directed by the
departmental officers.
61 V,
VI
(S4) 3
- 1M² (One
Square
Metre)
-
13 368.00 Special ceiling plastering and finishing the
exposed surface of all RCC items of work such
as slabs, beams, sunshades, facia, canopy slab,
staircase waist slab, landing slab etc., with
Cement Mortar 1:3 (One Cement and Three
Sand) 10mm thick including hacking the
surfaces, providing cement mortar nosing,
beading for sunshades, staircases, steps, landing
slabs and curing, etc., in all floors complying
with standard specification and as directed by
the departmental officers
56 &
57
- 1M² (One
Square
Metre)
-
14 35.00 Damp proof course with Cement Mortar 1:4
(One Cement and Four sand) 12mm thick
mixed with best approved quality water
proofing compound conforming to Indian
Standard specification as specified by the
departmental officers at 2% by weight of
cement used and finishing, curing etc. complete
complying with standard specification.
S38
(S6) &
V, VI
- 1M² (One
Square
Metre)
-
14 | P a g e
15 27.00 Weathering course in brick jelly lime concrete
using broken brick jelly of size 20mm uniform
gauge in pure slaked lime (no sand to be used)
to the proportion of brick jelly to lime being
32:12.5 by volume and laid over the RCC roof
slab in a single layer of required slope and
finished by beating the concrete with wooden
beaters of approved pattern, keeping the surface
constantly wet by sprinkling lime jaggery
water, etc., complete as per standard
specification and as directed by the
departmental officers.
51
(10-1)
V, VI
(S5)
VII, 3
- 1M² (One
Square
Metre)
-
16 219.00 Finishing the top of roof with one course of
machine pressed tiles of size 230mm x 230mm
x 20mm of approved quality set in Cement
Mortar 1:3 (One Cement and Three Sand)
12mm thick mixed with water proofing
compound conforming to ISS at 2% by weight
of cement used and the joints pointed neatly to
full depth of tiles with the same cement mortar
mixed with red oxide and water proofing
compound including curing etc., complete
complying with standard specification and as
directed by the departmental officers
44 H
V, VI
(S5A)
VII, 3
- 1M² (One
Square
Metre)
-
17 406.00 Dadooing walls with following best approved
quality, white / colour glazed tile of size
(300mm x 450mm x 6mm) set in Cement
Mortar 1:2 (One Cement and Two sand) 10mm
thick and pointing the joints with white cement
mixed with colouring pigments at the rate of
0.40 Kg. / sq.m. Neatly in all floors, curing,
etc., complying with standard specification and
as directed by the departmental officers.
39 A - 1M² (One
Square
Metre)
-
15 | P a g e
18 185.00 Paving the floor with pre-polished concrete
anti-skid step tiles (Required shape and design)
of 20mm thick of approved quality and colour
laid in Cement Mortar 1:3 (One Cement and
Three sand) 20mm thick and pointed with white
cement mixed with colouring pigment at the
rate of 0.40 Kg. / sq.m., curing, etc., complete
complying with standard specification and as
directed by the departmental officers. (The
make and brand of the tiles should be got
approved by Executive Engineer before use on
works)
39 A - 1M² (One
Square
Metre)
-
19 4.00 Flooring with following ceramic tiles of size
305 x 305 x 6 mm laid over 20 mm thick
cement mortar 1:3 (One Cement and Three
Sand) base mortar over the existing slab / floor
including cutting the tiles to the required size
with special cutter wherever necessary, laying
in position and pointing with white cement
mixed with colouring pigment at the rate of 0.3
Kg. / sq.m. etc., complete complying with
standard specification. (The make and brand of
the tiles should be got approved by Executive
Engineer before use on works)
39 A - 1M² (One
Square
Metre)
-
20 13.00 Paving the floor with best quality Vitrified
Tiles of size 600 x 600 x 8mm of approved
colour, shade and quality laid in cement mortar
1:3 (one cement and three sand) 20mm thick in
all floors and the top pointed with the white
cement mixed same colour pigments etc.,
complete complying with standard
specification. (The make and brand of the tiles
should be got approved by Executive Engineer
before use on works)
SS - 1M² (One
Square
Metre)
-
16 | P a g e
21 86.00 Providing and fixing of Decorative pressed
tiles of 12 mm thick of all sizes and shape of
approved quality and colour of approved make,
quality and colour with pointed neatly with
colour cement at the rate of 0.40kg/m2 laid
without any air gap in the tiles neatly and fixing
in position as per standard specifications and as
directed by the departmental officer. The
colour & quality of tiles should be got approved
by Municipal Engineer before use on work
44 H
V, VI
(S5A)
VII, 3
- 1M² (One
Square
Metre)
-
22 31.00 Providing and fixing of Solid PVC door
shutters using 19 Gauge 19mm MS square
tubes for styles and outer frames. 15mm
MS square tubes for top, lock and bottom
rails. The steel tubes shall be covered
with 5mm thick solid PVC sheets.
Shutter using 5mm thick solid PVCsheets for
panelling shall rigidly fixed in
position including necessary furnitureand
fittings. The overall size ofstyles shall
be50mm x 30mm. The overall size of top rail,
Lock rail and bottomrail shall be75mm x
30mm. The overall size of frames shall be
50mm x 45mm, with suitable rabate for
housing the shutter. a) Solid panel PVC door
with frame
74 - 1M² (One
Square
Metre)
-
17 | P a g e
23 9.00 Supplying, fabrication and fixing in position of
aluminium Powder Coating matt finish
ALUMINIUM DOUBLE LEAF DOOR of size
1.80m x 2.10m half glazed and half plb board
fully 12mm thick board fully 5.5mm thick
glazed door using rectangular aluminium box
section of following sizes of frames and
shutters with necessary accessories such as
rubber beading, aluminium clips, best double
action floor spring door closer, handle locks
and glass including all materials labour and
power consumption charges required for
fabrication if necessary chopping dismantling
making necessary holes in RCC columns,
beams or masonary wherever necessary with
power drill to the extent required and made
good to the original conditions after fixing etc.,
complete. The aluminium surface must be
anodised with matt finish under electrically
controlled condition in accordance with IS
specifications 1868/1962 of anodic film
thickness of not less than 15 microns for all
sections. All the materials should be got
approved by the Engineer in charge before
fixing as directed
81 A - 1M² (One
Square
Metre)
-
24 10.00 Supplying and erecting pull and push type
rolling shutter with ISI make of approved size
and section using 18 GI sheet. The shutter shall
be painted with one coat of red oxide primer
and the rate is inclusive of hood covers
transportation charges etc.,
84-A - 1M² (One
Square
Metre)
-
18 | P a g e
25 425.00 Supplying and painting the walls with two coats
of cement paint over one coat of cement primer
as instructed by the departmental officers
including preparation of surface curing, etc.,
complete in all floors complying with standard
specifications (The colour and shade of the
cement paint shall be got approved by the
Executive Engineer before use of work).
65-A - 1M² (One
Square
Metre)
-
26 1570.00 Painting two coats with Plastic Emulsion paint
of approved quality colour over new wall
surfaces including cleaning and preparing the
surface, scaffolding etc., complete.
SS - 1M² (One
Square
Metre)
-
27 11.00 Supplying and fixing 50mm thick (both side
polished) marble slabs for shelves (4 tier) with
neat finishing. The rate inclusive of cost of slab
and labour charges for fixing etc., complete as
directed by the departmental officer.
39-A - 1M² (One
Square
Metre)
-
19 | P a g e
28 11.00 Supplying and fixing in position Indian Water
Closet (Oriya type) of size 580 x 440mm colour
glazed earthen ware of approved quality and
brand with "P" or "S" trap conforming to BIS
with sand cushion and forming flooring alround
the closet using 40mm broken brick jelly in
lime concrete 1:2:5 (One lime, Two sand and
Five brick jelly) 100mm thick and finishing the
top to the required slope and including giving
necessary connection to CI soil pipes (including
the cost of 100mm dia CI pipe for a length of
600mm) by dismantling brick masonry wall /
reinforced cement concrete roof / floor slab and
making good the dismantled portion to the
original condition with leakages etc., complete
complying with standard specifications and as
directed by the departmental officers. (The
water closet should be got approved by the
Executive Engineer before use on works).
102-A - Each
-
29 6.00 Supplying and fixing in position white / colour
glazed European Water Closet of best quality
and approved make with 100 mm "P" or "S"
trap connecting with CI pipe of 100mm dia /
PVC pipe of 110mm dia, double flapped rigid
PVC black seat and seat cover with CP brass
hinges including cost of white cement, cement
for packing, spun yarn, teak wood plugs, brass
screws, etc., including supplying and fixing 10
litres capacity PVC / 12.5 litres capacity
porcelin low level flushing tank with a pair of
CI brackets, etc., complete with all fittings such
as 15mm brass ball valve with polythene float
with brass handle, union, coupling connected
by means of 40mm white PVC flush hand using
Indian adopter joint including all internal
102-A - Each
-
20 | P a g e
fittings.
30 16.00 Supply and fixing in position of best Indian
make white / colour glazed earthenware lipped
mouth flat back urinal of best quality and
approved make of size 430mm x 260mm x
350mm with GI pipe, 32mm dia bell mouth
PVC connection and waste pipe, 15mm dia GI
pipe of required length, 15mm dia GM wheel
valve, 15mm dia brass nipple 2 Nos., and fixing
the urinals in position with necessary TW
plugs, clamps, screws, etc., including
dismantling masnory and re-doing the same to
the original condition, etc., including painting
the pipe with two coats of best quality approved
synthetic enamel paint over one coat of red
oxide primer and checked without any leakage
etc. complete complying with standard
specifications and as directed by the
departmental officers. (The urinal should be
got approved by the Executive Engineer before
use on works.)
102-A - Each
-
21 | P a g e
31 9.00 Supplying and fixing in position best quality
and approved make Indian made white / colour
glazed earthenware wash hand basin of size 550
x 400mm (with pedestal / without pedestal)
with a pair of cast iron brackets, including cost
15mm dia brass CP pillar tap, 32mm dia "B"
class GI waste pipe with rubber plug and chain,
15mm dia GM wheel valve, 15mm brass
nipple, 15mm dia nylone connection, 32mm dia
CP brass waste coupling including fixing of
wash basin using CI brackets on to the wall in
position with TW plugs and screws, rubber
washers, white lead and giving necessary water
supply connection and painting the brackets
with two coat of painting over a priming coat of
anti-corrosive paint including testing for
leakages etc., complete complying with
standard specification and as directed by the
departmental officers. (The wash hand basin
and specials should be got approved by the
Executive Engineer before use on works).
102 - Each
-
32 25.00 Supplying and fixing in position 15mm dia
brass CP screw down tap / Pillar tap (heavy
duty) of approved make conforming to BIS
specifications and quality including cost of
shellac, thread, etc., complete complying with
standard specification and including cutting and
threading wherever necessary. (Taps should be
got approved by the Executive Engineer before
use on the works)
102-A - Each
-
22 | P a g e
33 4.00 Supplying and fixing in position Indian make
bevelled edge mirror of approved quality and
brand PVC / Fibre Glass framed 600 x 450 x
5.5mm thick mirror, shelf type with hard board
backing of approved colour fixed with brass
screws, rawl plug, etc., complete complying
with standard specification. (The mirror should
be got approved by the Executive Engineer
before use on woks)
102-A - Each
-
34 4.00 Supplying and fixing approved best quality
brass CP towel rail 600mm long and 20mm dia
with brackets of same materials including cost
of teak wood plugs and CP screws, etc.,
complete complying with standard
specifications. (The tower rail should be got
approved by Executive Engineer before use on
works).
102-A - Each
-
35 8.00 Supplying and fixing best approved best quality
brass CP soap tray of size 150 x 150mm
including cost of teak wood plugs, brass
screws, etc., complete complying with standard
specifications. (The soap tray should be got
approved by Executive Engineer before use on
works).
102-A - Each
-
36 20.00 Drilling of bore wells of size 4" (100 mm) to 5"
(125mm) dia in Sedimentary formation using
hand bore sets including insertion of casing
pipes and removal of casing pipes etc.,
including supplying and packing of pebbles and
conveyance of hand Bore set including loading
and unloading.
Drilling of 140/150 mm pilot bore
Upto 20 mt. Depth ending below ground level
26-A - 1 RM
(One
Running
Metre)
-
37 15.00 Providing and Fixing PVC CASING PIPE AS
PER IS 12818 / 2010 with Excise Duty 150 mm
dia CS
102-A - 1 RM
(One
Running
-
23 | P a g e
Metre)
38 1.00 Providing and fixing PVC SPECIALS AS PER
IS 10124/1982 Part-II 140 mm dia pipe end cap
102-A - Each
-
39 Providing and fixing HDPE PIPES - PE 100
AS PER IS 4984/1995 of the following dia with
necessary TW clamps, plugs, shoes, bends,
other lamps, screws nails etc., complete
complying with standard specifications. The
rate is inclusive of cost of removable iron
gratings of appropriate size. The size of Teak
wood plugs used is 150 x 25mm in front & 200
x 75mm in rear (wall side) with a depth of
110mm. The pipe is to be fixed by means of U
clamps at the centre of pipes to be fixed
102-A -
a) 120.00 For 110mm dia HDPE pipes - 1 RM
(One
Running
Metre)
-
b) 80.00 For 75mm dia HDPE pipes - 1 RM
(One
Running
Metre)
-
40 10.00 Supplying and fixing position CI Nahani Trap /
Floor Trap of the following sizes with best
stainless steel gratings of approved brand and
quality, fixed over a bed of brick jelly lime
concrete 1:2:5 (One part of lime, two part of
sand and five part of 40mm gauge brick jelly)
and finished with Cement Mortar 1:3 (One
102-A - Each
-
24 | P a g e
Cement, Three sand) including dismantling
masonry works wherever found necessary and
making good the dismantled portions to the
original condition and giving connection to the
CI / PVC pipes, etc., complete complying with
standard specification. (The Nahani Trap
should be got approved by the Executive
Engineer before use on works)
41 20.00 Supplying and fixing in position 150 x 100mm
"P" or "S" stoneware gully trap 'A' grade with
CI double gratings of size 150 x 150mm and
230 x 230mm at bottom and top respectively
with necessary earth work excavation laid over
a bed of brick jelly cement concrete 1:3:6 (One
cement, Three sand and Six broken brick jelly)
150mm thick using 40mm size broken brick
jelly including necessary brick work and
plastering including dismantling masonry
wherever necessary and re-doing the damaged
portions to the original conditions using cement
concrete 1:3:6 using 20mm stone jelly for
fixing the gully trap and giving connections to
stoneware sewer line etc., complete complying
with standard specifications. [Earth work
excavation, brick work, plastering shall be
measured and paid separately]. The stoneware
gully trap should be got approved by the
Executive Engineer before use on works.
102-A - Each
-
42 1.00 Supply and delivery of Single phase
Submersible Pump set as per IS 8034 1 HP
15X70 LPM including PVC INSULATED
AND SHEATHED 3 CORE FLAT TYPE
COPPER CABLE CONFORMING TO IS
694/1990 WITHOUT PANEL BOARD
including all charges etc. complete as per
standard specification.
98 - Each
-
25 | P a g e
43 1.00 Supply and delivery of Single phase Panel
Board 1HP with two level guard and auto start
including all charges etc. complete as per
standard specification.
98 - Each
-
44 1.00 Labour charges for the erection of submersible
pump set 5HP in bore well/open well including
fixing and jointing submersible cable with
proper clamps upto the starter to required depth
and also fixing of riser pipes to the required
depth valves erection clamps, pressure gauges
upto the exterior wall of pump room and
erection of panel board consisting of TPICN
switches starter, voltmeter, Ammeter, three
pilot (indicating) lamps capacitor single
phasing preventer, water level guard and laying
and jointing the cables and twin earthing as per
IE rules etc., complete and testing the pump set
and trail run for 10 days
98 - Each
-
45 85.00 Supply and run of 2 of 6 sqmm PVC insulated
SC unsheathed Cu. Conductor of 1100 V grade
on 7/20 GI bearer wire for SERVICE
CONNCETIONS MAINS.(SD-62)
102-A - 1 RM
(One
Running
Metre)
-
46 70.00 Supply and run of 2 of 1.5 Sq.mm PVC
insulated SC unsheathed Cu. Conductor of
1100 V grade on 7/20 GI bearer wire for
SERVICE CONNCETIONS MAINS.(SD-62)
102-A - 1 RM
(One
Running
Metre)
-
26 | P a g e
47 24.00 Wiring with 2 x 1.5 Sq.mm (22/0.3)PVC
insulated SC unsheated copper conductor cable
of 1100 V grade in suitable heavy gauge MS
conduit pipe concealed in wall and ceiling with
MS accessories with switch box with 5A FT
switch Two way in flush with sall and covered
with 3mm thick hylem sheet for MS switch box
with continuous earth wire connection of 14
SWG TC wire wire and making good of the
concealed portion with suitable colour for
concealed PVC FAN POINT (SD-3)
102-A - 1 RM
(One
Running
Metre)
-
48 525.00 Supply, laying and jointing of 2 core x 10
Sq.mm armouredaluminium UG CABLE from
meter board to EB pole to service connections
including cost and conveyance of all materials
and labour charges for laying and fixing the
cable etc., complete (SD-198)
SS - 1 RM
(One
Running
Metre)
-
49 17.00 Supply and fixing of 12 W / 18 W square type
latest model LED light with necessary
accessories fixing on Ceiling/ false ceiling with
PVC unsheathed Copper leads from terminals
to the fitting.
SS - Each
-
50 1.00 Supply and fixing of 32 Amps DPIC Switch of
500 V with metal clad with fuse and neutral
(Side Handle) on suitable TW Board , with
earth connection only SD 143
SS - Each
-
51 2.00 Supply and fixing of TNEB METER BOARD
suitable for 32A single phase service
connection with 32A fuse unit 500V 32 A
neutral link and earth link (1"x1/8" Copper flat)
on TW plank of size 375mm x 300mm x 19mm
with supporting TW reepers of 1" thick an
SS - Each
-
27 | P a g e
either side with painting with suitable bold and
nuts for fixing the TW plank on wall with earth
connection and inter connection with 7/20 PVC
insulated copper wire form EB meter to FUSE
ONLY (SD-125)
52 80.00 Providing Pathway hand rail using 304 Grade
16SWG SS pipe 40 mm Dia as verticals at high
spaced at 1 Meter centre with top railing 50 mm
Dia and 25 mm dia pipe intermediaterigidly
fixed with spacing of 0.30 mtr centre to centre
vertically in the existing concrete / brick wall
structure and properly fixed including all
materials and labour charges polishing
transport charges etc., complete
SS - 1 RM
(One
Running
Metre)
-
53 1380.00 Providing and fixing Kerb Slab of size 0.45
X0.125 X 0.30 Mtr
Supply and fixing of PCC precast kerb wall in
PCC 1:2:4 mix using 20mm gauge hard broken
granite stone jelly and river sand .Labour
charges for fixing the kerb wall in position
complying with standard specification as
directed by the departmental officers etc.,
complete
30 - 1 RM
(One
Running
Metre)
-
54 Supplying, laying and jointing of following
size of CPVC pipes of approved make and
ISI quality FINOLEX (OR) EQUIVALENT
(WITH lSI MONOGRAM) including fixing
CPVC specials but excluding cost of CPVC
specials, cutting, threading of pipes
concealing the pipes into wall with
necessary clamps and nails , dismantling the
wall, laying pipes and making good the
dismantled portion to original condition with
necessary brick work and plastering wherever
necessary etc. complete as directed by the
Corporation Officers.
SS -
28 | P a g e
a) 50.00 For 40 mm Dia CPVC Pipe -Working Pressure
10 kg/ sq.m
- 1 RM
(One
Running
Metre)
-
b) 30.00 For 25 mm Dia CPVC Pipe -Working Pressure
10 kg/ sq.m
- 1 RM
(One
Running
Metre)
-
c) 20.00 For 20 mm Dia CPVC Pipe -Working Pressure
10 kg/ sq.m
- 1 RM
(One
Running
Metre)
-
d) 50.00 For 15 mm Dia CPVC Pipe -Working Pressure
10 kg/ sq.m
- 1 RM
(One
Running
Metre)
-
55 Supplying and fixing in position first quality
and approved variety of Gun metal Gate Valve
/ Wheel Valve with BIS make of the following
dia including cost of shellac, thread balls, etc.,
complete complying with standard
specifications (for both internal and external
water supply arrangements). The valves to be
used on work shall be got approved by the
Executive Engineer before use on work.
102 A -
a) 15.00 20mm
- Each
-
b) 3.00 40mm
- Each
-
29 | P a g e
56 Supplying and fixing in position the following
CPVC, PVC& GI Specials of heavy type and
approved quality and good variety excluding
fixing charges but including necessary cutting
and threading of GI pipes, jointing the GI
specials and painting with two coats with good
variety and best quality synthetic enamel paint
over a coat of red oxide primer and jointing the
specials with pipe line using shellac etc.,
complete complying with standard
specification. (The GI specials should be got
approved by the Executive Engineer concerned
before use on works.)
102 A -
a) 20.00 25 mm Dia CPVC Elbow
- Each
-
b) 20.00 25 mm Dia CPVC Tee
- Each
-
c) 25.00 25 mm Dia CPVC coupling
- Each
-
e) 10.00 20mm Dia CPVC Elbow
- Each
-
e) 12.00 20mm dia CPVC Tee
- Each
-
f) 40.00 20 & 15mm dia CPVC elbow
- Each
-
30 | P a g e
g) 10.00 40mm dia GI Tee
- Each
-
h) 8.00 40mm dia GI Elbow
- Each
-
i) 4.00 40mm dia GI Union
- Each
-
j) 12.00 40mm dia GI Nipple
- Each
-
k) 15.00 40mm x 25mm dia GI Nipple
- Each
-
l) 5.00 40mm dia GI Coupling
- Each
-
m) 10.00 75mm dia PVC Plain elbow
- Each
-
n) 10.00 75mm dia PVC Door Elbow
- Each
-
o) 10.00 75mm dia PVC Door Tee
- Each
-
31 | P a g e
p) 10.00 75mm dia PVC Tee
- Each
-
q) 10.00 110mm dia PVC Door Tee
- Each
-
r) 5.00 110mm dia PVC Bend
- Each
-
s) 2.00 110mm dia PVC Cowl
- Each
-
t) 15.00 110mm dia PVC door Bend
- Each
-
u) 10.00 110mm dia PVC Tee
- Each
-
57 6.00 Supplying and fixing in position CI manhole
covers with CI frames (Heavy duty) of size
60cm x 60cm of best approved quality as per
standard specification etc., complete complying
with standard specifications
100 - Each
-
32 | P a g e
58 27.00 Exterior Façade;
Supplying, fabricating and fixing in position of
glazed designer tiles of dimension 450 X 450
mm and. structural the frame to be made with
45 mm X25 mmX 2 mm type angle aluminium
powder coated for support the cladding at equal
interval.. The rate including cost of all material
labour and conveyance to site etc. complete
SS - 1M² (One
Square
Metre)
-
59 1410.00 Supply, fabrication and fixing of Compound
Gate and Truss work with one coat of priming
coat including Cost and conveyance of all
materials and labour charges to site etc.
complete- Providing and fixing pre-fabricated
Double leaf compound gate with outer frame
120 X60 mm Box section with 16mm bright
square bars scroll of 16 X 8 mm flat with
aldrop tower – built , cover plate and bearing
including providing 450 mm height 300 mm
width motifs of M S plate 4 mm thick and
locking arrangement, pintals and hold fast
embedded in cement concrete 1:2:4 (1 cement:
2 coarse sand : 4 granitic or basaltic aggregate
20mm nominal size) including applying
priming coat with ready mixed red lead paint
and painting 2 or more coats with superior
ready mixed paint of approved brand and
manufacture in all shades as per direction of
Engineer including transportation and loading ,
unloading charges etc. complete.
84-A - 1 KG
(One
Kilograms)
-
33 | P a g e
60 35.00 Supply, fabrication & installation of Opaque
glass of cladding. The UPVC frame shall be
made out of extruded high impact resistant rigid
thermo vinyl polymers corresponding to DIN
53479 with excellent UV stabilization. The fire
property of the extruded section is
corresponding to DIN 52613. The Outer frame
shall dimensions of 96 x45 mm with wall
thickness of 1.5mm ± 0.3 mm with overall
process variation. The sliding shutter frame
shall be made 57 x 32 mm with wall thickness
of 2mm ± 0.3mm. The glazing beading shall be
made out of extruded section having overall
dimensions of 14 x 18.8 x 21 mm with wall
thickness of 1.3 mm ± 0.3 mm. The
interlocking system made out of extruded
section having overall dimensions of 35mm x
5mm shall be provided in between all shutters.
The interlocking section will be ultrasonically
welded on the shutter. EPDM weathering seals
and glazing seals shall be provided along with
necessary fittings.
SS - 1M² (One
Square
Metre)
-
61 21.00 Seating Benches
Providing and laying cast iron with handle
garden benches of approved design with
Wooden Strip Model RI B02 (Normal Size)
seat of length 5ft x2ft (1.5 X 0.60 Mtr) width
placed and fixed with necessary bolts and nuts
with painting the cast-iron parts and other
members and varnishing the battens etc. all
complete as per directions of engineer in-
charge. Including Transportation cost and
embossing logo on the benches etc. as
approved by Engineer- in - charge etc.
complete
SS - Each
-
34 | P a g e
62 55.00 Supplying and erecting LED square / circular
16 to 20W down lighter having pressure die-
cast aluminium housing, opal translucent cover,
mounting arrangement with board for surface
type or spring loaded mounting clips for flush
type complete.
SS - Each
-
63 81.00 Supply and fixing of 80 W LED Light,
complete with all accessories on the existing
bracket on street light poles; 1 amps 240 VAC
Lumen output = 95-100 Lumens/watt voltage:
100-277 VAC 50/60Hz., ColorTemperature:
white.5000-6500K.
• (Seoul Semiconductor brand / body material
Casing – Aluminium Die cast )
SS - Each
-
64 1.00 Supply and fixing of A.C Ceiling fan
complete 1200 mm (48") sweep with
300mm Down rod and Stepped electronic
300W / 450W square type fan
regulator (Anchor Deluxe / Equivalent) with
necessary accessories fixing on Ceiling/ false
ceiling with PVC unsheathed Copper leads
from terminals to the fitting. CONFORMING
TO ISS 374 / 1979
SS - Each
-
35 | P a g e
65 Supplying, fabrication and fixing in position of
StructuralGlazing DOOR and FACAD with
Toughened Glass 12mm t/g with cut-out
charges and Ozone Glass fittings with Silicon
paste with necessary accessories such as rubber
beading, aluminium clips, best double action
floor spring door closer, handle locks and glass
including all materials labour and power
consumption charges required for fabrication if
necessary chopping dismantling making
necessary holes in RCC columns, beams or
masonary wherever necessary with power drill
to the extent required and made good to the
original conditions after fixing etc., complete.
All the materials should be got approved by the
Engineer in charge before fixing as directed
SS -
a) 1.00 For Glass Door size 1.8 x 2.7 Mtr double Leaf
Door with Top Panel)( Refer Sketch No 1)
- Each
-
b) 1.00 For Fixed Glazing Partition 2 X 1.00 X 2.70
Mtrs ( Refer Sketch No8)
- Each
-
36 | P a g e
66 Paving the floor with Granite slabs (super fine
polished with machine cut edges) of approved
quality and colour of following sizes and 18
mm to 20 mm thick of approved make, quality
and colour in all floors over a base layer of
cement mortar 1:3(one cement three sand)
20mm thick and laid straight alignment and
pointed neatly with colour cement at the rate of
0.40kg/m2 laid without any air gap in the tiles
neatly and fixing in position as per standard
specifications and as directed by the
departmental officer. The colour & quality of
stone should be got approved by Municipal
Engineer before use on work
3 -
a) 35.00 For 50 mm/ 25 mm strip Rough Granite Dry
cladding at compound wall or similar places
- 1M² (One
Square
Metre)
-
67 4.00 Providing & erecting 3 m high (clear height)
precast decorative Heritage light pole with
Granite Appearance (3 Lined dressed granite
Pillar) of approved quality and colour of size
9" X9" of precast RCC pole concealment with
10 mm thick granite tile of approved make,
quality and colour with groove over a base
layer of cement mortar 1:3(one cement three
sand) 20mm thick and laid straight alignment
and pointed neatly with colour cement at the
rate of 0.40kg/m2 laid without any air gap in
the granite stone neatly and fixing in position
as per standard specifications complete with all
accessories, driver / power supply (if any),
connecting wire complete as required and
directed by the departmental officer. Supplier
must provide 5years warranty on the product.
The colour & quality of stone should be got
SS - Each
-
37 | P a g e
approved by Municipal Engineer before use on
work.
68 54.00 Providing and fixing Bitumen Felt 15 mm thick
pad For Expansion Joint.
- 1M² (One
Square
Metre)
-
Total Work Value
GST at 18%
Grand Total
Total Number of Items- 68 (Sixty Eight items
only)
-