tanager shop luminaire installation guidebaltled.lt/.../en_shop_tanager_installation_guide.pdf ·...
TRANSCRIPT
1/7
TANAGER SHOP LUMINAIRE INSTALLATION GUIDE
INSIDE THE BOX:
WARNING
• Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
• Luminaire may fall down if not installed properly.
• Avoid direct eye exposure to the light source while it is on.
• For indoor use only.
• Dry location only.
• Do not operate luminaire with damaged parts.
• To prevent wiring damage or abrasion, do not expose wiring
to edges of sheet metal or other sharp objects.
• The light source of this luminaire is not replaceable, when
the light source reaches its end of life the whole
luminaire shall be replaced.
• The manufacturer shall not be liable for any damage
resulting from inappropriate modifications to the
luminaire or faulty installation.
• • If you have any questions, contact the manufacturer.
Surface mounting Cable mounting
NEEDED FOR MOUNTING:
www.baltled.com6 March, 2018
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
Track mounting
L, mm W, mm H, mm
310 / 560 / 1060 / 1560 145.5 81 / 138* /131.5**
* With track mounting option** With cable mounting
2/7
FULMAR H 120MOUNTING ON SURFACE
1 2
4
5 6 SCREWING
7 8
TANAGER INDUSTRIAL LUMINAIRE INSTALLATION GUIDE
www.baltled.com6 March, 2018
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
3/7
FULMAR H 120MOUNTING ON SURFACE
9 10
TANAGER INDUSTRIAL LUMINAIRE INSTALLATION GUIDE
1211
1413
13
www.baltled.com6 March, 2018
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
4/7
FULMAR H 120CABLE MOUNTING
1 2
4
5
7 8
TANAGER INDUSTRIAL LUMINAIRE INSTALLATION GUIDE
6
www.baltled.com6 March, 2018
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
5/7
FULMAR H 120CABLE MOUNTING
9 10
TANAGER INDUSTRIAL LUMINAIRE INSTALLATION GUIDE
1211
13
www.baltled.com6 March, 2018
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
6/7
FULMAR H 120TRACK MOUNTING
1 2
TANAGER INDUSTRIAL LUMINAIRE INSTALLATION GUIDE
43
5
www.baltled.com6 March, 2018
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
7/7
FULMAR H 120RECOMMENDATIONS FOR MOUNTING*
TANAGER INDUSTRIAL LUMINAIRE INSTALLATION GUIDE
1 2 3
4 5 6
1 1.5 2 3 5
2.5 3 4 4 5 6
3 3 3 4 5 6
4 3 3 3 4 5
5 2 3 3 3 4
6 3 3 3 3 3
H, m
B, m
B
H
B/H POSITION
<0.18 1
0.19 – 0.24 2
0.25 – 0.59 3
0.6 – 0.85 4
0.86 – 1.25 5
> 1.26 6
* An example for Tanager with Milky Cover + UGR shades.
www.baltled.com6 March, 2018
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.