tank lining brochure

8/10/2019 Tank Lining Brochure

http://slidepdf.com/reader/full/tank-lining-brochure 1/7

COMPLETE STORAGE TANK

COATING PROTECTION



HEMPEL OFFERS A RANGE OF COATING SOLUTIONS

FOR THE COMPLETE PROTECTION OF STORAGE TANKS:

• Tank linings for the storage of crude oil, bio-fuels, chemicals, water,petroleum products and vegetable oils.

• Exterior tank coating systems, t ailor-made to customers’ needs.

• Coating systems for efficient storage tank maintenance.



TANK LININGS

Name Typical Use Product

Features Resistance

High temperature

resistance

VOC

Content

Color

Shades

Certificates

and Approvals

HEMPADUR 35900As an interior lining in tanks, pipelines etc. for crude oil,water and produced water up to 93°C

•High-build•Solvent-free•Excellent adhesion

•Resistance to high temperatures•Specially developed for Oil&Gas segment

Crude oilWaterProduced Water

Bio fuels

Up to 93°C 22 g/l 20320/Cream

NORSOK M-501 rev. 6,systems 7A, 7B, 7C, 3C, 3E, 3DARAMCO APCS-2EIMO PSPC (COT Test)

ShellChevron

HEMPADUR ANTI-STATIC 85170As an anti-static tank lining for storage tanks containingcrude oil, fuel oil, diesel oil, jet fuel, motor gasoline andsimilar.

•Very good adhesion•Excellent water and chemical resistance

Crude oilFuel oilDiesel oilJet fuelMotor gasoline

In water (water phase):Maximum: 90°C

310 g/l19990/Black12400/Grey

ITB Recommendation

HEMPADUR 35560 As a lining in potable water tanks and pipelines.•High-build•Solvent-free•Excellent resistance to fresh water

Potable waterUp to 45°C (no temperaturegradient)

0 g/l50900/Red20320/Cream10500/Light Grey

Water Research Centre (WRAS)according to BS 6920 (up to 35oC)NFS-61 (Drinking Water SystemsComponents) by NFS InternationalNorwegian Health AuthoritiesNORSOK M-501 rev. 6, system 3A,prequalified to systems 7A and 7BTested according ANSI/AWWA C210-07 forinternal use in pipelines for potable waterservices

HEMPEL’S VINYL ESTER GF 35910

As a lining i n immersed environments where superiorresistance to chemical attack is required. It is also agood choice for aggressive atmospheric and spillageconditions.

•Reinforced with glass flakes•High-build•Superior resistance to chemicals

Most chemicalenvironmentswith pH range 0 to 13demineralised watersolvents

Up to 95°C in sea water 356 g/l 11630/Of f-whi te ARAMCO APCS

HEMPADUR 85671

As an interior lining in tanks, pipelines etc. for hot

water, brine, crude oil, etc.For coating of potable water tanks.As a primer coat in specific painting systems.

•Good resistance at high temperatures•Good adhesion

Hot water

BrineCrude oilPotable water

In water (maximum gradient 15°C):up to 90°C 316 g/l 11150*/Light grey*

Danish Welding Institute-Section 175.300 U.S.FDANewcastle Occupational Health & HygieneIMO FTP Code Part 5, Test for Surface

Flammability (IMO Res. A.653(16)) (ChinaClassification Society - CCS)

Transport and Storage of Oil, Gas, Fuel (Air BP)Potable Water, Statens Institut for Folkehelse– Norway

HEMPADUR 15400 As a tank lining for fuels and gasoline •Excellent chemical resistance Wide range of chemicalsIn water (no temperature gradient):up to 50°C

463 g/l 10000/White*

NORSOK M-501 system no. 3 Water researchCentre (WRAS) FolkehelseinstituttetARAMCO APCS 2A, 2B, 2C British Defencestandards 80-97 annex G EI 1541

HEMPEL’S GALVOSIL 1570MSPECIAL ZINC SILICATE SYSTEMS fora wide range of fuels and chemicals and withoutstanding resistance against abrasion.

•Self-curing •Excellent chemical resistance

Most chemicalenvironmentswith pH range 6 to 9

For aqueous cargoes the maximumtemperature for storage is 45°C.Non-aqueous cargos - the maximumtemperature for storage is 90°C.

43 4 g /l 1 98 40 /M et al g rey

NORSOK M-501 rev.4, system 3Brecommended for system 3GASTM A-490 Class “B”FDA

*other shades according to assortment list



EXAMPLES OF TYPICAL TANK LINING SYSTEMS IN POLAND

A tank lining system for standard fuels and bio-fuels that meet Polish regulations in terms of anti-static properties:

A tank lining system for water and produced water up to 93°C:

2

Coating system DFT

HEMPADUR ANTI-STATIC 85170 150 µm

HEMPADUR ANTI-STATIC 85170 150 µm

Coating system DFT

HEMPADUR 35900 250 µm

HEMPADUR 35900 250 µm

Coating system DFT

HEMPADUR MASTIC 45880 / HEMPADUR 47200 140 µm

HEMPATHANE HS 55610 60 µm

Coating system DFT




Coating system DFT




HEMPADUR MASTIC 45880 is a high build, high volume solids, epoxy paint, which forms a hard and toughcoating. It is suitable as a primer and intermediate coat in heavy duty systems where low VOC and high film buildare required.The polyurethane topcoat, HEMPATHANE HS 55610, assures a long-lasting appearance with excellent gloss andcolour retention.

HEMPADUR ANTI-STATIC 85170 is a two-component, amine adduct cured phenolic epoxy (novolac) paint designedfor anti-corrosion protection of internal surface of storage fuel tanks where high level of anticorrosion protectionand anti-static properties are required. For the fuels tanks other coatings than HEMPADUR ANTI-STATIC 85170 can be applied when there is no rules to have the antistatic one.

HEMPADUR 47200 is a two-component, polyamine adduct cured epoxy paint with a very short drying time. Theproduct cures at temperatures above -10°C and form a tough and hard-wearing coating.

STORAGE TANK MAINTENANCE

For maintenance, Hempel specialists can identify the most suitable protective system, based on the originalcoating, scale of damage, corrosive environment and storage tank content.In addition, we can support our customers in setting up repair coating work procedures so that the best possibleresults can be achieved.

Benefits:

• Proven systems for maintenance• Fibre technology for tank bottom repair• Cost-effective solutions• Short ‘out of order’ time

Benefits:

• Improved works performance• Excellent corrosion protection• High chemical resistance• High visibility due to light colours & glossy surface• Long lifetime – up to 20 years

TANK EXTERIOR COATINGS

In addition to a wide range of tank linings, Hempel also offers proven coating systems for tank exteriors for allcorrosive environments, according to ISO 12944.

Benefits:

• Surface tolerant coatings that provide good steel penetration• Possibility to apply in high DFT, which leads to higher efficiency and time saving during application• Winter grade versions that cure at low temperatures (down to -10°C)• Environmentally friendly solutions, with low VOC

Hempel specialists can define a tailor-made system, depending on specific customer needs.

TYPICAL TANK EXTERIOR COATING SYSTEMS

• An external system, corrosivity category C4/long durability according to ISO 12944

•An external system, corrosivity category C4/medium durability according to ISO 12944

•A cost efficient system, corrosivity category C4/low durability according to ISO 12944



LIST OF REFERENCES

Project name Owner Country Year Subsegment

SONATRACH, ARZEW STATOIL Algeria 2013 Downstream-Tank and storage terminals

HEMPADUR 35900

Here are a small selection of references for Hempel’s tank lining products. For more information please contactyour local Hempel office.


OTT-er Phase 2 O il ta nk in g – Te rn eu ze n T he Ne th er la nd s 2 01 3 D ow ns tr ea m- Ta nk an d s to ra ge te rm in al s

2 Gasoline Tanks (Tanks N.2 & N.3) Erg Petroli Italy 2011 Downstream-Tank and storage terminals

ATB Vitol Storage Tank Terminal(841,000 cbm for fuel oil & distillate t anks)

ATT Tanju ng Bin Sdn Bh d M alays ia 2012 Down stream-Tank an d s torage terminals

Petrogal Expansion project - Tanks Petrogal Portugal 2011 Downstream-Refineries

Vitol Tanjung Bin Vitol (ATB) Singapore 2012 Downstream-Tank and storage terminals

HEMPADUR 35760


Datteln Power Plant EON Germany 2012 Power Generation-Coal fired power plants

Gönyu Power Plant EON Hungary 2011 Power Generation-Gas fired power plants

Maasvlakte power plant EONTheNetherlands

2012 Power Generation-Coal fired power plants

MIOS EDF EC Gdańsk EDF EC Gdańsk Poland 2013 Infrastructure-Infrastructure, others

Wilhelmshaven 8 STS Eurogate, APMT Germany 2011 Infrastructure-Cranes

HEMPEL’S GALVOSIL 1570M


Parque de Neves - JET A1 tank

ENCO - Empresa Nacional

de Combustiveis e Oleos,S.A.R.L.

Portugal 2010 Downstream-Tank and storage terminals

Petrogal Expansion project - Tanks Petrogal Portugal 2011 Downstream-Refineries

Sonangol - 2 Fuel tanks Sonangol E.P. Portugal 2010 Downstream-Tank and storage terminals

HEMPADUR 15400


Egypt Potable Water Pipe Line Egypt Government Egypt 2011 Pipelines -Potable water pipelines

IBS Pipe Line Algeria Goverment Algeria 2011 Pipelines-Potable water pipelines

Rania Pipe Line Iraq Government Turkey 2010 Pipelines-Potable water pipelines

HEMPADUR 35560


Boiler on 4th block in Kozienice power plant unknown Poland 2011 Power Generation-Boilers

Čepro fuel storages Čepro Czech Republic 2011 Downstream-Tank and storage terminals

Irsching 4 Power Plant EON Germany 2011 Power Generation-Gas fired power plants

HEMPADUR 85671


50 Zacns Tank Wagons - 62 Cbm For HCL Transport GATX Slovakia 2011 Rail new construction

Jubail Export Refinery Project - Package 6 (Tank Farm)Saudi Aramco TotalRefining and PetrochemicalCo. (SATORP)

S au di Ar ab ia 201 2 D own st re am -Ta nk an d s tor ag e te rmi na ls

Neste Oil Singapore NExBTL Plant (Tankage) Neste Oil Singapore 2009 Downstream-Petrochemical plants

HEMPEL’S VINYL ESTER GF 35910

ENVIRONMENTAL CONCERN

Hempel supports the protection of the environment and is fully committed to adhere to the strict environmentaldemands. We work actively to reduce the impact of our operations on human health and the environment, withinthe limits of sound economics and currently available technologies.

Therefore, our range of coatings includes very low VOC products, which allow our customers to comply with themost demanding environmental requirements.

Note:

The data, specifications and recommendations provided in this brochure are obtained from individual product datasheets. This is a summary only, not complete information and is subject to change. Therefore, it is exclusively theresponsibility of the user to obtain accurate, complete and appropriate information in relation to any particularintended use of these and other Hempel products. Unless expressly agreed otherwise in writing, the products aresupplied and all technical assistance is provided subject to Hempel’s general terms and conditions of sale, deliveryand service. Product data are subject to change without notice, so you should continue to monitor the latestversion of the individual product data sheets.



HEMPEL PAINTS (POLAND) Sp. z o.o.

ul. Szymanowskiego 2

80-280 Gdańsk

Tel.: +48 (58) 5218900

Fax: +48 (58) 5218902

E-mail: [email protected]

www.hempel.pl

P L 0 5 / 2 0 1 4 E

N

tank lining brochure

Documents