ta'or box - darolife · ta'or box dimensions for screw-on front fa: front overlay space...
TRANSCRIPT
TA'OR BOXTechnical brochure
www.taorbox.com
TA'OR BOX.THE NEW WOODENBOX SYSTEM.
Contents
TA’OR BOX
Planning and ordering information
6 General information
10 Materials and colours
11 MOVENTO planning information
14 Drawer - height N
15 Internal drawer - height N
16 Drawer - height M
17 Internal drawer - height M
18 Drawer - height K
19 Internal drawer - height K
20 Drawer - height C
21 Internal drawer - height C
22 Drawer - height F
23 Assembly aids
Assembly and adjustments
24 Assembly
26 Disassembly and MOVENTO adjustments
6
TA'OR BOX General information
Join the revolution
TA’OR BOX is Van Hoecke's revolutionary box system which is distinguishable both for its refined finish and innovative systems. TA’OR BOX is characterised by its slender sides and clean lines. It is available in two formats: a three-sided drawer and an inter-nal four-sided drawer.
■ Selection of up-to-date styles: 3 real wood veneer finishes, traditional black, grey and white finishes and three wood effect finishes
■ Height of sides: N, M, K, C and F■ The side panels are only 13 mm thick■ Cabinet width from 250 mm to 1,200
mm, to suit your individual requirements■ Drawer depths (NL) 250, 270, 300, 320,
350, 380, 400, 420, 450, 480, 500, 520, 550, 580, 600, 650, 700 and 750 mm
■ Dynamic load bearing capacity of 40 kg or 60 kg
■ Available with BLUMOTION, TIP-ON or TIP-ON BLUMOTION
■ Easy-to-assemble front thanks to the patented clip mechanism
Up to 9,350,000 possible combinations? At first glance, the freedom to combine shapes in mass produced goods seems too good to be true. Yet, with its wide range of colours, materials and dimensions, TA’OR offers infinite possibilities.
7
TA'OR BOXGeneral information
A higher level of quality
TA’OR BOX is assembled seamlessly using separate components. This patented tech-nique was designed specifically for assem-bling furniture.
Front assembly without tools
You will hear the superior front fixings by Blum click into place. The front is seamles-sly and firmly attached.
Handmade High Tech
Universal: Blum's assembly templates are equipped with a special element facilitating front drilling for TA'OR BOX.
The custom-built machine for TA'OR BOX allows the front, base and back to be adjus-ted flexibly on site.
8
TA'OR BOX General information
The perfect plan for a fixed price
Order TA’OR BOX online, for all order sizes from a single unit. The final price for your TA’OR BOX will be shown immediately. Even quicker and more accurate offers and calculations. Plan and place your order in just a few minutes.
High Tech for a new dimension of quality
Custom machines. Developed by the top OEMs (original equipment manufacturers) and used for the first time for TA'OR BOX.
9
TA'OR BOX
A new way of organising things
Perfect organisation and protection. Use in the kitchen or in any other room. Style and functionality, thanks to customisable dividers for TA’OR CUBICS and Blum AMBIA LINE.
Freedom. Both inside and outside.
Formats and dividers can be combined in different ways. The shape is almost entirely customisable.
General information
10
TA'OR BOX Materials and colours
Product Description
■ Available in two formats: a three-sided drawer and an internal four-sided drawer
■ Choice of different wood veneers, wood effects and colours
■ Choice of BLUMOTION runners (silent soft close), TIP-ON (mechanical opening) or TIP-ON (mechanical opening with silent soft close)
■ Tailor-made production to meet your requirements: choice of 9 colours, 5 heights, 18 depths and in any width required.
Possibility to choose a different colour for the inner drawer side and the bottom
■ Delivered in 3 working days
Colours
Side panels + base + back- natural oak - natural walnut- yaya shade of black- bardolino oak effect- nebraska oak effect- tennessee walnut effect- black effect- onyx grey effect- white effect
Internal mats- anti-slip mat- vinyl fiber- wool felt
whiteblackbardolino oak effect
tennessee walnut effect
nebraska oak effect
yaya shade of black
natural walnut
natural oak
Wood effect Block effectWood veneer
onyx grey
Options Distance profile
KPR6056 distance profile PVCwidth 25 mmblack, platina silver-grey, light grey, white
Required information
KB
LW
W
NL
Drawer + cabinet
LW int. cabinet measurement
KB ext. cabinet measurement
W thickness of side panel drawer type
NL depth
load
MOVENTO runner
BLUMOTION
or TIP-ON
or TIP-ON BLUMOTION
Front fixing
screw version
EXPANDO version
If the runners are assembled BEFORE the cabinet, the fixing position must be increased by at least 1 mm, from 38 mm to 39 mm
(to take into account the runner and cabinet tolerances).
11
TA'OR BOXUseful ordering information MOVENTO
MOVENTO BLUMOTION
1
2b
3
4
1 Runners
BLUMOTION
NL 40 kg 60 kg
250 mm 760H2500B
270 mm 760H2700B
300 mm 760H3000B
320 mm 760H3200B
350 mm 760H3500B
380 mm 760H3800B
400 mm 760H4000B
420 mm 760H4200B
450 mm 760H4500B 766H4500B
480 mm 760H4800B
500 mm 760H5000B 766H5000B
520 mm 760H5200B 766H5200B
550 mm 760H5500B 766H5500B
580 mm 766H5800B
600 mm 760H6000B 766H6000B
650 mm 766H6500B
700 mm 766H7000B
750 mm 766H7500B
4 Side stabilisation set
For external cabinet width 1,400 mm to be cut
For lengths of up to 400 mm ZS7M400MU
For lengths of up to 600 mm ZS7M600MU
For lengths of up to 750 mm ZS7M750MU
Cutting Internal cabinet width LW - 315 mm
2b Locking device with dowel - with side adjustment
Nylon/steel RAL 7037 dust grey T51.7601VH
Order left/right
2a Locking device side adjustment
Nylon/steel orange T51.7601
Order left/right
3 Depth adjustments
Nylon RAL 7037 dust grey 298.7600
For MOVENTO with BLUMOTION
Only for inset application
SERVO-DRIVE bumper included
Suitable to T51.7601 and T51.7601.VH
2a
12
TA'OR BOX
MOVENTO TIP-ON
1
2b
3b
3a
2a
Useful ordering information MOVENTO
3a TIP-ON synchronisation pinion set (optional)
Nylon RAL 7037 dust grey T57.7400.01
3b TIP-ON synchronisation linkage (optional)
Aluminium ZST.1160W
Adjusted to width
Cutting Internal cabinet width LW - 249 mm
2b Locking device with dowel - with side adjustment
Nylon/steel RAL 7037 dust grey T51.7601VH
Order left/right
2a Locking device with side adjustment
Nylon/steel orange T51.7601
Order left/right
- Side stabilisation set
For external cabinet width 1,400 mm to be cut
For lengths of up to 400 mm ZS7M400MU
For lengths of up to 600 mm ZS7M600MU
For lengths of up to 750 mm ZS7M750MU
Cutting Internal cabinet width LW - 315 mm
1 Runners
TIP-ON
NL 40 kg 60 kg
250 mm 760H2500T
270 mm 760H2700T
300 mm 760H3000T
320 mm 760H3200T
350 mm 760H3500T
380 mm 760H3800T
400 mm 760H4000T
420 mm 760H4200T
450 mm 760H4500T 766H4500T
480 mm 760H4800T
500 mm 760H5000T 766H5000T
520 mm 760H5200T 766H5200T
550 mm 760H5500T 766H5500T
580 mm 766H5800T
600 mm 760H6000T 766H6000T
650 mm 766H6500T
700 mm 766H7000T
750 mm 766H7500T
13
TA'OR BOX
MOVENTO TIP-ON BLUMOTION
12b
5
43
2a
3
4 TIP-ON BLUMOTION synchronisation linkage round
Cabinet widths
600 mm T60L298W
800 mm T60L498W
900 mm T60L598W
1000 mm T60L698W
1100 mm T60L798W
1200 mm T60L898W
1400 mm T60L1098W
Cutting Internal cabinet width LW - 267 mm
5 TIP-ON BLUMOTION synchronisation adapter
Symmetrical
T60.000D
3 TIP-ON BLUMOTION unit
Recommended weight ranges (total weight of the pull-out) for an optimum opening and closing function
Can be used for nominal length (mm) Unit Part nr. < 10 kg 20 kg 30 kg 40 kg 50 kg 60 kg
270 - 349 S1 T60L7140 ≤ 20
350 - 750 L1 T60L7340 ≤ 20
L3 T60L7540 5 - 40
L5 T60L7570 25 -60
Useful ordering information MOVENTO
2b Locking device with dowel - with side adjustment
Nylon/steel RAL 7037 dust grey T51.7601VH
Order left/right
2a Locking device with side adjustment
Nylon/steel orange T51.7601
Order left/right
- Side stabilisation set
For external cabinet width 1,400 mm to be cut
For lengths of up to 400 mm ZS7M400MU
For lengths of up to 600 mm ZS7M600MU
For lengths of up to 750 mm ZS7M750MU
Cutting Internal cabinet width LW - 315 mm
1 Runners
TIP-ON BLUMOTION
NL 40 kg 60 kg
250 mm
270 mm 760H2700M
300 mm 760H3000M
320 mm 760H3200M
350 mm 760H3500M
380 mm 760H3800M
400 mm 760H4000M
420 mm 760H4200M
450 mm 760H4500M 766H4500M
480 mm 760H4800M
500 mm 760H5000M 766H5000M
520 mm 760H5200M 766H5200M
550 mm 760H5500M 766H5500M
580 mm 766H5800M
600 mm 760H6000M 766H6000M
650 mm 766H6500M
700 mm 766H7000M
750 mm 766H7500M
14
TA'OR BOX Drawer - height N
Dimensions
Dimensions for screw-on front
FA: front overlay
Recessed fitting spaceSpace requirements in cabinet Front drilling dimensionsfor EXPANDO
80
NL + 3 mm
min
42
38
21
45,5
16
14 FAm
in 4
5,5
16
ø 10
min 12
Minimum internal cabinet depth = nominal length + 3 mm
Fixing position for cabinet runners - 40 kg
Nominal length (mm)
256
224
16032
9
37
250, 270
300 - 350
380 - 520
550, 600
Minimum internal cabinet depth = nominal length + 3 mm
Fixing position for cabinet runners - 60 kg
Nominal length (mm)
224
256
320
416
32 37
9
450
500 - 600
650 - 750
Accessories
Fixing screw for front fixing bracket
Ø 3,5 x 15 mm 609.1500
Ø 3,5 x 17 mm 609.1700
Screw for cabinet runners
Ø 6 x 11,5 mm 661.1150.HG
Ø 6 x 13 mm 661.1300.HG
Ø 6 x 14,5 mm 661.1450.HG
Front fixing bracket
EXPANDO version ZF7N70E2
Screw-on version ZF7N7002
Set covers for drawer sides
Aluminium INP.TA1.ZA7
Finish black aluminium INP.TZ1.ZA7
Bottom support
Steel LBS.xxx
Length bottom support (xxx) = NL - 13
Set screws for bottom support
Ø 3,5 x 8 mm T10 INP.TA1.SCR
Front drilling dimensions for bottom support
min 8LW/(X+1)+FALW/(X+1)LW/(X+1)
14,5
ø 2
LW≤ 300> 300 ≤ 800> 800 ≤ 1200> 1200
X0123
X Quantity of bottom supports
15
TA'OR BOXInner drawer - height N
Dimensions
Recessed fitting spaceSpace requirements in cabinet
min
42
38
21
80NL + 12 mm
Minimum internal cabinet depth = nominal length + 12 mm
Fixing position for cabinet runners - 40 kg
Nominal length (mm)
256
224
16032
9
37
250, 270
300 - 350
380 - 520
550, 600
Minimum internal cabinet depth = nominal length + 12 mm
Fixing position for cabinet runners - 60 kg
Nominal length (mm)
224
256
320
416
32 37
9
450
500 - 600
650 - 750
Accessories
Screw for cabinet runners
Ø 6 x 11,5 mm 661.1150.HG
Ø 6 x 13 mm 661.1300.HG
Ø 6 x 14,5 mm 661.1450.HG
Set covers for drawer sides
Aluminium INP.TA1.ZA7
Finish black aluminium INP.TZ1.ZA7
Bottom support
Steel LBS.xxx
Length bottom support (xxx) = NL - 13
Set screws for bottom support
Ø 3,5 x 8 mm T10 INP.TA1.SCR
16
TA'OR BOX
Dimensions for screw-on front
FA: front overlay
Recessed fitting spaceSpace requirements in cabinet Front drilling dimensionsfor EXPANDO
Dimensions
Drawer - height M
min
68
38
21
5132
14 FA
min 12
ø 10
32m
in 5
1
NL + 3 mm
106
Minimum internal cabinet depth = nominal length + 3 mm
Fixing position for cabinet runners - 40 kg
Nominal length (mm)
256
224
16032
9
37
250, 270
300 - 350
380 - 520
550, 600
Minimum internal cabinet depth = nominal length + 3 mm
Fixing position for cabinet runners - 60 kg
Nominal length (mm)
224
256
320
416
32 37
9
450
500 - 600
650 - 750
Accessories
Fixing screw for front fixing bracket
EXPANDO version 609.1500
Ø 3,5 x 17 mm 609.1700
Screw for cabinet runners
Ø 6 x 11,5 mm 661.1150.HG
Ø 6 x 13 mm 661.1300.HG
Ø 6 x 14,5 mm 661.1450.HG
Front fixing bracket
EXPANDO versie ZF7M70E2
Screw-on version ZF7M7002
Set covers for drawer sides
Aluminium INP.TA1.ZA7
Finish black aluminium INP.TZ1.ZA7
Bottom support
Steel LBS.xxx
Length bottom support (xxx) = NL - 13
Set screws for bottom support
Ø 3,5 x 8 mm T10 INP.TA1.SCR
Front drilling dimensions for bottom support
min 8LW/(X+1)+FALW/(X+1)LW/(X+1)
14,5
ø 2
LW≤ 300> 300 ≤ 800> 800 ≤ 1200> 1200
X0123
X Quantity of bottom supports
17
TA'OR BOX
Recessed fitting spaceSpace requirements in cabinet
Dimensions
Inner drawer - height M
min
68
38
21
NL + 12 mm
106
Minimum internal cabinet depth = nominal length + 12 mm
Fixing position for cabinet runners - 40 kg
Nominal length (mm)
256
224
16032
9
37
250, 270
300 - 350
380 - 520
550, 600
Minimum internal cabinet depth = nominal length + 12 mm
Fixing position for cabinet runners - 60 kg
Nominal length (mm)
224
256
320
416
32 37
9
450
500 - 600
650 - 750
Accessories
Screw for cabinet runners
Ø 6 x 11,5 mm 661.1150.HG
Ø 6 x 13 mm 661.1300.HG
Ø 6 x 14,5 mm 661.1450.HG
Set covers for drawer sides
Aluminium INP.TA1.ZA7
Finish black aluminium INP.TZ1.ZA7
Bottom support
Steel LBS.xxx
Length bottom support (xxx) = NL - 13
Set screws for bottom support
Ø 3,5 x 8 mm T10 INP.TA1.SCR
18
TA'OR BOX
Dimensions for screw-on front
FA: front overlay
Recessed fitting spaceSpace requirements in cabinet Front drilling dimensionsfor EXPANDO
Dimensions
Drawer - height K
5132
14 FA
min 12
ø 10
32m
in 5
1
min
106
38
21
144
NL + 3 mm
Minimum internal cabinet depth = nominal length + 3 mm
Fixing position for cabinet runners - 40 kg
Nominal length (mm)
256
224
16032
9
37
250, 270
300 - 350
380 - 520
550, 600
Minimum internal cabinet depth = nominal length + 3 mm
Fixing position for cabinet runners - 60 kg
Nominal length (mm)
224
256
320
416
32 37
9
450
500 - 600
650 - 750
Accessories
Fixing screw for front fixing bracket
Ø 3,5 x 15 mm 609.1500
Ø 3,5 x 17 mm 609.1700
Screw for cabinet runners
Ø 6 x 11,5 mm 661.1150.HG
Ø 6 x 13 mm 661.1300.HG
Ø 6 x 14,5 mm 661.1450.HG
Front fixing bracket
EXPANDO version ZF7K70E2
Screw-on version ZF7K7002
Set covers for drawer sides
Aluminium INP.TA1.ZA7
Finish black aluminium INP.TZ1.ZA7
Bottom support
Steel LBS.xxx
Length bottom support (xxx) = NL - 13
Set screws for bottom support
Ø 3,5 x 8 mm T10 INP.TA1.SCR
Front drilling dimensions for bottom support
min 8LW/(X+1)+FALW/(X+1)LW/(X+1)
14,5
ø 2
LW≤ 300> 300 ≤ 800> 800 ≤ 1200> 1200
X0123
X Quantity of bottom supports
19
TA'OR BOX
Recessed fitting spaceSpace requirements in cabinet
Dimensions
Inner drawer - height K
min
106
38
21
144
NL + 12 mm
Minimum internal cabinet depth = nominal length + 12 mm
Fixing position for cabinet runners - 40 kg
Nominal length (mm)
256
224
16032
9
37
250, 270
300 - 350
380 - 520
550, 600
Minimum internal cabinet depth = nominal length + 12 mm
Fixing position for cabinet runners - 60 kg
Nominal length (mm)
224
256
320
416
32 37
9
450
500 - 600
650 - 750
Accessories
Screw for cabinet runners
Ø 6 x 11,5 mm 661.1150.HG
Ø 6 x 13 mm 661.1300.HG
Ø 6 x 14,5 mm 661.1450.HG
Set covers for drawer sides
Aluminium INP.TA1.ZA7
Finish black aluminium INP.TZ1.ZA7
Bottom support
Steel LBS.xxx
Length bottom support (xxx) = NL - 13
Set screws for bottom support
Ø 3,5 x 8 mm T10 INP.TA1.SCR
20
TA'OR BOX
Dimensions for screw-on front
FA: front overlay
Recessed fitting spaceSpace requirements in cabinet Front drilling dimensionsfor EXPANDO
Dimensions
Drawer - height C
5132
64
14 FA
32
min 12
ø 10
6432
32m
in 5
1
min
155
38
21
NL + 3 mm
193
Minimum internal cabinet depth = nominal length + 3 mm
Fixing position for cabinet runners - 40 kg
Nominal length (mm)
256
224
16032
9
37
250, 270
300 - 350
380 - 520
550, 600
Minimum internal cabinet depth = nominal length + 3 mm
Fixing position for cabinet runners - 60 kg
Nominal length (mm)
224
256
320
416
32 37
9
450
500 - 600
650 - 750
Accessories
Fixing screw for front fixing bracket
Ø 3,5 x 15 mm 609.1500
Ø 3,5 x 17 mm 609.1700
Screw for cabinet runners
Ø 6 x 11,5 mm 661.1150.HG
Ø 6 x 13 mm 661.1300.HG
Ø 6 x 14,5 mm 661.1450.HG
Front fixing bracket
EXPANDO version ZF7M70E2
Screw-on version ZF7M7002
Set covers for drawer sides
Aluminium INP.TA1.ZA7
Finish black aluminium INP.TZ1.ZA7
Bottom support
Steel LBS.xxx
Length bottom support (xxx) = NL - 13
Set screws for bottom support
Ø 3,5 x 8 mm T10 INP.TA1.SCR
Front drilling dimensions for bottom support
min 8LW/(X+1)+FALW/(X+1)LW/(X+1)
14,5
ø 2
LW≤ 300> 300 ≤ 800> 800 ≤ 1200> 1200
X0123
X Quantity of bottom supports
21
TA'OR BOX
Dimensions
Inner drawer - height C
Recessed fitting spaceSpace requirements in cabinet
min
155
38
21
NL + 12 mm19
3
Minimum internal cabinet depth = nominal length + 12 mm
Fixing position for cabinet runners - 40 kg
Nominal length (mm)
256
224
16032
9
37
250, 270
300 - 350
380 - 520
550, 600
Minimum internal cabinet depth = nominal length + 12 mm
Fixing position for cabinet runners - 60 kg
Nominal length (mm)
224
256
320
416
32 37
9
450
500 - 600
650 - 750
Accessories
Screw for cabinet runners
Ø 6 x 11,5 mm 661.1150.HG
Ø 6 x 13 mm 661.1300.HG
Ø 6 x 14,5 mm 661.1450.HG
Set covers for drawer sides
Aluminium INP.TA1.ZA7
Finish black aluminium INP.TZ1.ZA7
Bottom support
Steel LBS.xxx
Length bottom support (xxx) = NL - 13
Set screws for bottom support
Ø 3,5 x 8 mm T10 INP.TA1.SCR
22
TA'OR BOX
Dimensions for screw-on front
FA: front overlay
Recessed fitting spaceSpace requirements in cabinet Front drilling dimensionsfor EXPANDO
Dimensions
Drawer - height F
5132
3232
64
14 FA
32
3232
3264
32m
in 5
1
ø 10
min 12
219
38
21
257
NL + 3 mm
Minimum internal cabinet depth = nominal length + 3 mm
Fixing position for cabinet runners - 40 kg
Nominal length (mm)
256
224
16032
9
37
250, 270
300 - 350
380 - 520
550, 600
Minimum internal cabinet depth = nominal length + 3 mm
Fixing position for cabinet runners - 60 kg
Nominal length (mm)
224
256
320
416
32 37
9
450
500 - 600
650 - 750
Accessories
Fixing screw for front fixing bracket
Ø 3,5 x 15 mm 609.1500
Ø 3,5 x 17 mm 609.1700
Screw for cabinet runners
Ø 6 x 11,5 mm 661.1150.HG
Ø 6 x 13 mm 661.1300.HG
Ø 6 x 14,5 mm 661.1450.HG
Front fixing bracket
EXPANDO version ZF7M70E2
Screw-on version ZF7M7002
Set covers for drawer sides
Aluminium INP.TA1.ZA7
Finish black aluminium INP.TZ1.ZA7
Bottom support
Steel LBS.xxx
Length bottom support (xxx) = NL - 13
Set screws for bottom support
Ø 3,5 x 8 mm T10 INP.TA1.SCR
Front drilling dimensions for bottom support
min 8LW/(X+1)+FALW/(X+1)LW/(X+1)
14,5
ø 2
LW≤ 300> 300 ≤ 800> 800 ≤ 1200> 1200
X0123
X Quantity of bottom supports
23
TA'OR BOX
32
min
51
27,5
min 12
ø 10
min 7
ø 15
23 32
16
min
45,
5
22
min 12
ø 10
min 7
ø 15
23 32
Assembly aids
Drilling template for locking device with dowel
Drilling template for locking device with dowel
Template for drilling of fixing positions for locking device with dowel TML.0040
Accessories
1 universal Blum drilling template ZML.0040
2 15 mm drill bit for TML.0040 TML.BO15.RE
3 drill bit stop for TML.0040 TML.STOP
How to use
Drilling dimensions for locking device with dowel
For locking device with dowel
■ place the TML.0040 on the ZML.0040
■ determine the template positions according to the plan
■ position the template
■ drill holes for locking device with dowel (Ø 15 mm)
Option to drill for fixing of the front (Ø 10 mm)
Drawer height - N
24
TA'OR BOX
11
CLICK
12CLICK
13
1 2
5 6 7
8 9
CLICK
10
3 4
Assembly
Assembly drawer
25
TA'OR BOX
6 7
1 2
CLICK
8 9
CLICK
4 5
4 5
Assembly
Assembly front
3 - screw-on
3 - with dowel
26
TA'OR BOX
2
1 2
5
1
2
1
2
4
54
Disassembly and MOVENTO adjustments
Disassembly front
Height adjustment: + 3 mm Tilt adjustmentSide adjustment Two-sided via locking device +/- 1.5 mm
Side adjustmentCompensation via the right, back runner
Compensation side adjustment Height adjustmentSide adjustment Tilt adjustment
3 - with dowel
3 - screw-on
Van Hoecke nv
Europark-Noord 9
9100 Sint-Niklaas
Belgium
Tel.: +32 (0)3 760 19 00
Fax: +32 (0)3 760 19 19
www.taorbox.com
Sub
ject
to te
chni
cal c
hang
es a
nd r
ange
cha
nges
.A
ll co
nten
t is
copy
right
ed b
y Va
n H
oeck
e.P
ublis
her:
Pet
er V
an H
oeck
e, E
urop
ark-
Noo
rd 9
, B-9
100
Sin
t-N
ikla
as, B
-910
0 S
int-
Nik
laas
.C
TA.T
AX
T.E
N
09.
15