tap assignment (2)
TRANSCRIPT
-
8/3/2019 TAP Assignment (2)
1/12
TECHNOLOGY OF APPAREL
PRODUCTION
Spec Sheet of Women Formal Trosuer andHooded Jacket
INTRODUCTION:
Our woven garment is: Womens Formal TrouserKnitted Garment is : Hooded Jacket
Name of the Woven Garment: WOMENSFORMAL TROUSER
-
8/3/2019 TAP Assignment (2)
2/12
DESCRIPTION OF WOVEN GARMENT:
Garment type- Formal Women Trouser
Shade- Dark Black
Blend- Cotton(98%) / Lycra(2%)
Size- 32
-
8/3/2019 TAP Assignment (2)
3/12
Brand- Annabelle
TRIMS:
Buttons
Zipper
Labels
Thread
PARTS LISTING:
Back Panel - 2 piecesFront Panel - 2 piecesPocket - 2 pieces
Belt Loops - 5 pieces
Waist Band- 1 piece
Zipper- 1 piece
Labels
Main Label
Wash Care Label
Size Label
Barcode Label
Preparatory operations:
WAIST BAND PREPARATION
S.No Operation M/C usedNeedleType
Stitch
Type Seam Type
1 Interlining operation
Fusing
machine 162 Double panel waistband SNLS 16 301 Superimpos
-
8/3/2019 TAP Assignment (2)
4/12
stitching e
3 Inside top stitch SNLS 16 103Superimpos
e
4Bias bound in inside
Waistband layer SNLS 16 401Superimpos
e
5 Bias bound binding byusing folder SNLS 16 301 Superimpose
6 Loops attached SNLS 16 301Superimpos
e
Belt Loop MakingS.No Operation M/C used
NeedleType
StitchType Seam Type
1 Belt Loop Making SNLS 16 103 Flat Seam
2 Belt loop attached
Bar Tack
M/C 18
Superimpos
e
Fly PreparationS.No Operation M/C used
NeedleType
StitchType
SeamType
1Fusing by microdot
(right fly)Fusing
Machine
2 Over edging of 3 fly SNLS 16 504
3 Stitch 2 left fly SNLS 16 301Superimp
ose
In all the stitches needle type is 16 (DB X 1 90/ 14).
Needle thread is 3/80s polyester.
For bar tacking needle type is 18.
Standard s.p.i. is 10
-
8/3/2019 TAP Assignment (2)
5/12
OPERATION BREAKDOWN:
4 Panel Over locking (stitch no- 504)
Surging Operation
Coin Pocket making using French seam
Dart Closing(back) (top stitch 301)
Single hip pocket making
Closing pocket back using French seam
Zipper fly operation
Right zipper fly fused on microdots & overlocked
Left two flies are fused & overlocked
Superimpose the two leg flies, top stitch it & then turn it
Stitch the zipper to top fly. (Top Stitch)
Stitch the front panel, top fly & bottom fly at the same
time with top stitch.
Stitch the fly with the front panel
Stitch the right side of the zipper with the bottom fly
J stitch the right panel with the fly
Bar tack the zipper fly opening end.
Make crotch
Fusing operation of waistband
Attach inside facing
Make inside top stitch (Stitch no- 301)
Bias bound inside lining
-
8/3/2019 TAP Assignment (2)
6/12
Bias bound folder for binding
Stitch & Ditch
Belt loop making (Blind stitch- 103)
Belt loop attach using bar tack machine
Button hole making
Out Seam Stitching (Stitch no- 301)
Inseam stitching (Stitch no- 301)
Bottom Hemming
Attaching Labels
FLOW DIAGRAM :
Panel
Overlocki
ng
Back Dart
Making
Single hip
pocket
making
Zipper
foot
attached
Zipper
-
8/3/2019 TAP Assignment (2)
7/12
Description of the Knitted Garment
Garment Type: Hooded Jacket
Shade: Light Grey
Blend: 100% Cotton
Trims:
Buttons
Lace
Zipper
Waist
Band
Fusing of
Waist
Band
Belt Loop
Making
Belt loop
Attachme
nt
Bottom
Hemming
AttachingLabels
GARMENT
-
8/3/2019 TAP Assignment (2)
8/12
Photo of the garment:
Hooded Jacket
Identification of different componentparts
S.NO Name of the parts Number of
parts1. Front
Panel-1Panel-2Kangaroo Pocket- 1Kangaroo Pocket- 2
Placket- 1Placket Cuff- 1
6
2. Back
13. Sleeve
Right sleeveLeft sleeve 2
4. Hooded cap
2
Total 11
-
8/3/2019 TAP Assignment (2)
9/12
OPERATION BREAKDOWN:
S No OperationMachine used Stitch
SeamType
NeedleType
1
SettingFront panel-
1 withpanel-2
2ZipperAttachment SNLS 301 top stitch
SuperImposed 16
3Left pocketattachment SNLS 301 top stitch
SuperImposed 16
4
JoinKangarooPockets
4thread overlock
514 attached+
SuperImposed 16406 top stitch
-
8/3/2019 TAP Assignment (2)
10/12
5
Attach Frontpanel withBACK panel
4thread overlock
514 attached+
SuperImposed 16406 top stitch
6
HOODMAKING :JoiningHood panel-1 attachedto panel-2 SNLS
514+406/overlock safetystitch
SuperImposed 16
7
Folding ofHOOD sideedges
2threadoverlock
406/bottomcovering only 16
8
AttachingHood withNeck
4thread overlock
514/Superimposed over lockmock safetystitch
SuperImposed 16
9Sleevesattachment
4thread overlock
514 over lockmock safetystitch
SuperImposed 16
10
Sleeveshemming(wrist side)
2threadoverlock
406/bottomcovering only 16
11Side Seamattachment
4thread overlock
514/Superimposed over lockmock safetystitch 16
12 Bar tacking
BartackM/C 18
13
Garmentbottom
hemming
2threadflat
lock
406/bottom
covering only 16In all the stitches needle type is 16 (DB X 1 90/ 14).
Needle thread is 3/80s polyester.
For bar tacking needle type is 18.
Standard s.p.i. is 10
-
8/3/2019 TAP Assignment (2)
11/12
FLOW DIAGRAM :
SLEEVES
HOOD
MAKING
FRONT
PANEL BACK PANEL
Join hood
panel-1
with hood
panel 2
Setting
front
panel
-
8/3/2019 TAP Assignment (2)
12/12
Attachsleeves
Attach
Side
Seam
Bottom
Hemming
Attaching
Label
Folding
wristedges
Attachment of zipper with
front panels and stitching
the placket with left panel
+ Stitching Cuff with left
panel
Attach
hood with
neck
Folding of
side
edges
Stitching front & back
panels and stitching
shoulder .
GARME
NT