tapping no prices
TRANSCRIPT
Tapping CaTalogEFFECTiVE MaRCH 1, 2009
M a d e I n U . S . A .
What's inside....
power pak & accessories ...............................3
Faucets and accessories .............................4-7
Keg Couplers ...............................................8-11
Single Valve Test Coupler & pocket Thermometer ...................................................12
Beer line Cleaning Equipment ................13-14
party pumps ..............................................15-16
primary Regulators ........................................17
Secondary Regulators & Beer pump panels ...................................................18
air/gas Distribution Equipment ...............19-20
Tubing and Fittings ...................................21-22
Hose Clamps, Fittings, Connectors ........23-24
Home Dispensing Equipment .......................24
Dispensing Heads .....................................24-26
Drip pans and Spacesaver Drainers ............27
air Cooled Dispensing Systems ...................28
assorted accessories ....................................29
�
Power PakAir cooled Power Paks are 17"D x 24"W x 25"H.Two gallons of Glycol are required for each Power Pak bath, plus an additional one gallon for every 85 ft. of trunk line. Glycol concentration should be 33%.Must order Electric Cord Kit and Leg Mounting Kit separately.
Power Pak Accessories
Part No. Description
63299-1 One gallon Glycol (67% Water, 33% Glycol)
C22296A-20 Cord Kit
57782 Leg Kit
63333 Adapter Kit:Kit includes: unions and clamps to connect 1/2" to 3/8" tubing
63335 Coolant Connector Kit:Connects Power Pak to trunk housing 1/2" tub-ing.
Power Paks
Part No.Maximum
LengthCompressor
Size
4404 150 Ft. 1/3 HP
4410 300 Ft. 1/2 HP
�
525 & 575 Beer Faucets
Part No. Description
525SS Stainless steel beer faucet
525SSTF Stainless steel beer faucet with tarnish-free brass exterior
575SS Stainless steel beer faucet with push-back creamer feature to add foam
575SSTF Stainless steel beer faucet with tarnish-free exterior & push-back creamer feature to add foam
Perl Beer FaUCeTSThe stainless steel Perl faucet is unique in both appearance and function. It's revolutionary Perl ball and floating O-ring design eliminates the need for a valve shaft. Internal parts are not exposed to air so the handle lever doesn't stick and there is no build up of mold and bacteria in the faucet body. The Perl faucet has fewer internal parts for better reliability and fewer service calls. A polished interior produces a smooth flow with less foaming. The knob is sold separately. Packed one to a carton.
STainleSS STeelPerl Beer FaUCeTS
8
7
2
2
3
45A
6A
5/6
FaUCeT rePlaCemenT ParTS — 525 & 575 SerieS
525 & 575 Series Replacement Parts
Item Part No.FaucetStyle Description
2 425-8 525SS “O” ring
3 43838 525SS “O” ring seat
4 308-3-2P 525SS Coupling gasket
5 40193-1 525SS Handle lever
5A 67030 575SS Handle lever assembly
6 67018-1 525SS Bearing cup
6A 67008-1 575SS Bearing cup
7 43835-243835-2TF 525SS Compression bonnet chrome
Tarnish-free compression bonnet
8 408A-16408A-16TF 525SS Handle jacket chrome
Tarnish-free handle Jacket
When ordering parts, please specify part no. & quantity of each required.
All Perl faucets include a stainless steel handle for strength and sanitation.
Pushing the Perl handle back moves a stainless steel piston, exposing small holes. The turbu-lence created by beer passing through the holes produces a creamy head. When the handle is released, an internal compression spring moves the piston back, stopping the beer flow.
The push-back creamer fau-cet enables the operator to pour the precise amount of foam every time.
Revolutionary floating O-ring
The Perl Stainless Steel Faucet with rotatable Handle lever
The Perl Stainless Steel Push-Back Creamer Faucet with non-rotatable Handle lever
5
TarniSH-Free PoliSHed BraSS
Beer FaUCeTSand SHankS
Throw away your brass polish. Perlick tarnish-free pol-ished brass faucets stay looking like new without tedious polishing. All Perlick beer faucets are designed to be the best faucets available on the market today. And they’re made in the USA. ● Smooth bore spout and interior to reduce foaming. ● Teflon friction ring for smooth, easy operation ● Brass or stainless lever handle. Available in polished chrome, polished brass, tarnish-free polished brass or nickel-plated. Furnished less knob. Packed one to a carton. Shipping Weight: 8 oz.
No. 408XTF No. 307
Beer Faucets
Part No. Description
408X Polished chrome w/brass lever handle
408XPB Polished brass w/brass lever handle
408XTF Tarnish-free brass w/brass lever handle
408XN Nickel-plated w/lever handle
410X Polished chrome w/st. st. lever handle
410XPB Polished brass w/st. st. lever handle
410XTF Tarnish-free brass w/st. st. lever handle
Faucets with Flow Control
Part No. Description
307 Polished chrome with shank
307PB Polished brass with shank
307X Polished chrome less shank
307XPB Polished brass less shank
307XSS Stainless steel less shank
*Pull handle forward to dispense beer. Push handle back to create a foamy head.
Item Part No. Description
1 308-1X* Faucet body
2 408-2A* Shaft
3 308-10N Screw
4 43473-26* Shaft assembly
5 408-27 Handle lever (brass)
5 410-27 Handle lever (st. st.)
6 408-15*408-15PB*408-15TF*
Compression bonnetCompression bonnet polished brassCompression bonnet tarnish free
7 408-16*408-16TF
CollarTarnish-free collar
8 308-38 Knob
9 408-25* Handle assy. for No. 408
10 308-3-2P Coupling gasket
11 307-3-2P Seat washer
12 308-55 Friction ring
13 307-8-2P Bonnet washer
FaUCeT rePlaCemenT ParTS - 408 and 410 SerieS
*Add PB for polished brass, TF for tarnish-free brass. Call Perlick for pricing.
�
No. 308-40B
No. 63799-6
SHank ParTS
1 2 � 5�
Beer FaUCeTS, SHankS and aCCeSSorieS
FaUCeT SHankS 1⁄4” i.d. Bore For 408/410/425 SerieS FaUCeTS
Part No. Length
63799-3 3"
63799-4 4"
63799-6 6"
63799-8 8"
63799-10 10"
63799-12 12"
Faucet Shanks for Flow Control Faucets
Part No. Description
307-30 Chrome
307-30PB Brass
43542 Stainless steel
Shank Parts
Item Part No. Description
1 134D Lock nut
2 307-14SS Flange stainless steel
2 307-14PB Flange polished brass
3 308-14 Coupling ferrule chrome
3 308-14TF Coupling ferrule tarnish -free brass
4 308-8 Keeper ring
5 308-9 Keeper spring
Beer FaUCeT loCkTamper-proof and extremely easy to install and remove, Perlick’s chrome-plated beer faucet lock features brass tumbler, hardened steel locking hasp and locks that are keyed alike. For use with 307, 425, 408 and 410 faucets only.
Beer Faucet Lock
Part No. Description
308-40B Beer faucet lock
C293A Replacement key
Item Part No. Description
1 43816 Kit with plastic shaft
1A 43816SS Kit with st. st. shaft
1 43816TF Kit with plastic shaft & TF brass handle jacket
1A 43816SSTF Kit with st. st. shaft & TF brass handle jacket
2 308-3-2P Coupling gasket
3 425-8 O-ring (3 places)
4 425-3A Spout (plastic)
4A 425-3 Spout (st. st.)
4B 425-3TF Spout (tarnish-free)
5 425-5 Bearing cups (2 places)
6 307-8-2P Bonnet washer
7 408-15 Bonnet (chrome)
7 408-15TF Bonnet (tarnish-free)
8 308-38 Knob (not Included)
43773-1 Cleaning adapter
FaUCeT rePlaCemenT ParTS — 425 SerieS
noTE:WHEN PURCHASING A KIT. USEALL KIT PARTS TO REPLACEOLD EXISTING FAUCET PARTS.
4
3
55
3
4B
4a
1a
1a1
“KiT”
“KiT”1“KiT”
1a1
7
8
6
5
“KiT”
1a1“KiT”
43773-1
7
Beer FaUCeT aCCeSSorieS
Part No. Description
22050-1 Cleaning adapter
308-30 Spanner wrench
Part No. Description
32492-1 Cleaning adapter for 307 faucets
TUrBo TaPS Specify flow rate 1-3 gallons per minute.
Beer meCHaniC’S ComBinaTion wrenCH Six tools in one; screw-driver, 1⁄2” opening for locknut on regulator pressure adjusting screw, 3⁄4” opening for holding probe on keg coupler, 1” opening for coupling nuts, 11⁄16” opening for coupling nuts, and spanner end for faucets.
Part No. Description
40106 Combination wrench
doUBle FaUCeT SHankS Part No.
Part No. Description
63795-2 2” Shank - chrome
63795-4 4” Shank - chrome
63795-6 6” Shank - chrome
63795-2PB 2” Shank - brass
63795-4PB 4” Shank - brass
63795-6PB 6” Shank - brass
PUSHBaCk waTer FaUCeTS wiTH Flow ConTrol
Part No. Description
600 Faucet & shank for 21⁄2" wall
602WS8 Faucet and 8" stand
1/2” NPS MALE INLET THREAD (TYP.)(7/8” DIA. HOLE REQUIRED)
ADJUSTABLE “FLOW”CONTROL NOZZLE
NO. 602WS8NO. 600
No. 308-30 No. 22050-1
FaUCeTS andaCCeSSorieS
* When using Turbo Tap, must order tallest special height tower. Can only be used with 408X style faucets.
Turbo Taps
Part No. Description
375S* 33⁄4” Turbo Tap - standard
375SL* 33⁄4” Turbo Tap - standard locking
475S* 43⁄4” Turbo Tap - for tall glasses
475SL* 43⁄4” Turbo Tap - for tall glasses - locking
575S* 53⁄4” Turbo Tap - for pitchers
575SL* 53⁄4” Turbo Tap - for pitchers - locking
�
PerliCk ekS CoUPlerS w/inTeGral emPTy keG SenSorS ✓ Keepsbeerlosstoaminimum ✓ Speedsserviceonkegchangeovers ✓ Minimizesoverfoaming
The patented Perlick EKS Coupler* combines an integral Empty Keg Sensor with a quality keg coupler to eliminate the need for wall-mounted FOB devices. It senses when a keg is empty and shuts off the beer flow, yet leaves the line fully charged with beer. This prevents gas from entering an empty line causing excessive foaming when tapping a fresh keg. Packed 25 per case. Weight: 1 lb. 8 oz. each.
Perlick EKS Couplers
Part No. Description
36000F* For domestic kegs
37500F For imported kegs*U.S. Patent #5,630, 441
No. 36000F
No. 43739A
keGCoUPlerS
UniverSal emPTy keG SenSor
Controls the amount of beer loss by closing off the beerflow when a keg empties. Mounts directly to the keg coupler for dual probe or imported kegs.
lo-Boy Coupler for SingleValve Domestic Kegs
Uniquely constructed to tap a keg in limited space. Just push down and twist to tap.
Lo-Boy Coupler for Single Valve Domestic Kegs
Part No. Description
40030 Lo-Boy
Trupour Wall Mount Cam lever FoB Detector
✓ Uniquepatentedselfsealing ventvalvetotallyprevents accidentalwaste
✓ Constructionissmall,stable anduserfriendly
✓ Functioningispreciseand consistent,fromfirsttolast pourofeverykeg
✓ Uniqueformofmechanical floatvalveensuresnowaste witheverykeg
TruPour Wall Mount Cam Lever FOB Detector
Part No. Description
43844 TruPour wall mount FOB detector
43844C TruPour wall mount FOB detector w/beer thread inlet & outlet
Universal Empty Keg Sensor
Part No. Description
43739A Universal empty keg sensor without vent
Replacement Parts
Part No. Description
63897 Replacement top w/valve assembly
63898 Float and “O” ring
63899 “O” ring kit
�
keG CoUPler
G-SerieS keG CoUPlerS For SinGle valve domeSTiC and imPorTed keGS Provided with non-rotating probe in stainless steel or nickel-plated brass. Enlarged bore and wider tip opening produces less turbulence and restriction which allows for reduced line pressure and CO2 breakout. Nickel-plated, forged brass body with three internally mounted seals. Floating ball check valve equalizes line pressure. Relief valve vents over-pressurized keg. For bent probe design, attach #2036SS elbow to external thread on keg couplers. Optional locking shield prevents accidental untapping. Individually packed, 25 per case. Weight 24 oz. each.
For Domestic Kegs
Part No. Description
36000G Probe, brass, less lock
36000GS Probe, st. st., less lock
36000G1 Probe, brass, with lock
36000GS1 Probe, st. st., with lock
G series Keg Coupler Replacement Parts
Item Part No. Description
1 65800 Body
2 40174-1 Probe - domestic brass
3 43641-1 Ball stop
4 31080-2P Ball
5 31089-2P “O” ring, 3 per assembly
6 31087-2P Probe washer - domestic
7 31088-2P Bottom seal washer
8 23682-2P Check valve
9 157R2P Washer
10 2068-1 Tailpiece
11 2026 Coupling nut
12 67045-1 Retaining screw
13 67042 Yoke assembly standard
14 67042 Yoke assembly with lock
15 2036SS Elbow coupling (optional)
16 32474-1 Wrench
17 40106 Combination wrench (optional)
No. 36000G
No. 36000G1
No. 2036SS No. 32695
G Series keg Coupler replacement Parts
keGCoUPlerS
For Imported Kegs
Part No. Description
37500G Probe, brass, less lock
37500GS Probe, st. st., less lock
37500G1 Probe, brass, with lock
37500GS1 Probe, st. st., with lock
Elbow for Bent Probe Couplers
Part No. Description
2036SS St. st. elbow
Lug Straightener for Single Valve Kegs
Part No. Description
32695 Lug straightener
When ordering parts, please specify part No. and quantity of each required.
17
5
11
12
2
4
3
9
10
9
8
1
7
6
1413
16
15
10
d-SerieS keG CoUPlerS For SinGle valve domeSTiC and imPorTed keGS Exclusive one-piece rotating probe helps prevent twisting beer lines. Nickel-plated, forged brass body with three internally mounted seals. Floating ball check valve equaliz-es line pressure. Relief valve vents over-pressurized kegs. Optional locking shield prevents accidental untapping. Individually packed, 25 per case. Weight 24 oz. each.
For Domestic Kegs
Part No. Description
36000D Probe, less lock
36000D1 Probe, with lock
36000D2 Bent probe, less lock
For Imported Kegs
Part No. Description
37500D2 Bent probe, less lock
keG CoUPler rePlaCemenT ParTS
No. 36000D
keg Coupler replacement Parts
No. 36000D2
keGCoUPlerS
No. 2036SS
No. 36000D1
D Series Keg Coupler Replacement Parts
Item Part No. Description
1 32499B Probe assembly
2 40184-1 Probe body
3 31080-2P Ball
4 43641-1 Ball retainer
5 31087-2P Probe washer
6 31089-2P “O” ring, 3 per assembly
7 65800 Body
8 23682-2P Check valve
9 157R2P Washer
10 2068-1 Tailpiece
11 2026 Coupling nut
12 31088-2P Bottom seal washer
13 67045-1 Retaining screw
14 67042 Yoke assembly standard
15 67066 Yoke assembly with lock
16 32474-1 Wrench
17 2036SS Elbow coupling (optional)
18 40106 Combination wrench (optional)
16
17
1412
5
8
7
9
11
10
15
13
6
4
3
2
9
1
18
1
11
26000g Series Replacement parts
3
5
4
6
1
2
7
108 9 5
11
13
12 14
18
17
1615
26000D Series Replacement parts
165
12
891011
14
13
15
3
4
2
1
7
6
2�000G Series Keg Coupler Replacement Parts
Item Part No. Description
1 40174-1 Probe - brass
1 40174-1SS Probe - stainless steel
2 40157-1* Probe, brass, Imported kegs
2 40157-1SS* Probe, st. st., Imported kegs
3 2036SS Elbow for bent probe, st. st.
4 43641-1 Ball retaining spring
5 157R2P Washer
6 31080-2P Ball check
7 31089-2P O-ring (3 per ass’y.)
8 2026 Hex nut
9 2068-1 Tailpiece
10 23682-2P Check valve
11 43061 Coupler body
12 31479-1* Probe washer, imported
13 31088-2P Bottom seal washer
14 31087-2P Probe washer, domestic
15 31084-1 Retaining screw
16 43001A Yoke less lock-domestic
17 43002A Yoke with lock- domestic
18 32474-1 Wrench
keGCoUPlerS
*Replacement part used exclusively for Keg Couplers for Imported Kegs.
2�000G Series Keg Coupler Replacement Parts
Item Part No. Description
1 32499B Probe assembly
2 40184-1 Probe body
3 31080-2P Ball
4 43641-1 Ball retainer
5 31087-2P Probe washer
6 31089-2P O-ring (3 per assembly)
7 43061 Body
8 23682-2P Check valve
9 157R2P Washer
10 2068-1 Tailpiece
11 2026 Coupling nut
12 31088-2P Bottom seal washer
13 31084-1 Retaining screw
14 43002A Yoke assembly with lock
15 43001A Yoke assembly Standard
16 32474-1 Wrench
26000g Series Replacement parts
26000D Series Replacement parts
12
Single Valve Test Coupler
Part No. Description
26159B Test couplerFor operating instructions request form number Z2066.
PoCkeT THermomeTerPart No. Description
1595B Digital pocket w/1” dial
SinGle valve TeST CoUPler& PoCkeT THermomeTer
No. 26159B
No. 1595B
1�
Beer lineCleaninG eqUiPmenT
CleaninG adaPTerSSingle and dual cleaning adapters uniquely design-ed to operate when Perlick’s keg coupler is in the untapped (handle up) position, allowing the system to be cleaned from the faucet through the keg coupler. Prevents solution from entering the CO2 line, eliminating beer contamination when retapping. Brass nickel-plated. (Bulk Packed)
Part No. Description
43657* Single/domestic kegs
43681* Dual/domestic kegs
43659* Series/domestic kegs
43699 Single/imported kegs
43702 Dual/imported kegs
26165 Wall-mount flusher assembly with shut-off valve-single valve
*Note: These adapters are designed to be used with all Perlick single valve couplers and most competitor’s couplers. Must be used with Smart Couplers when cleaning lines from the faucet through the Smart Coupler.
CleaninG kiTKit includes a sterilizer w/faucet coupling, a spanner wrench, a faucet brush, ball lifter and 4 oz. beer line cleaner.Part No.
Part No. Description
63797 Cleaning kit
CleaninG BrUSHeSIndividually packed
Heavy-dUTy eleCTriC Beer line Cleaner● Heavy-duty pump designed for long draw systems. ● Pulsating action breaks down beer stone deposits.● Pressure regulator lim- its line pressure to 50 psi reducing potential for damage to beer lines.● Fully enclosed in protective case.● Coating on internal parts helps resist chemical damage.
Furnished with a 6 foot inlet filtered line and a 6 foot discharge line with a #22050-1 adapter and shoulder strap.
Part No. Description
64301 Beer line cleaner
64302 Two wheel cart (for #64301 only)
No. 32492-1
No. 186 No. 22050-1
No. 63798
No. 63797
No. 43657 No. 43681 No. 43659 Single Dual Series Adapter Adapter Adapter
No. 696AN
No. 691N
Part No. Description
689N Brush - 5⁄8" x 36"
691N Brush- 3⁄16" x 46"
696AN Brush - faucet - 73⁄4"
Part No. Description
63798 Jar with pump
Part No. Description
22050-1 Cleaning adapter for 408X/410X faucet
186 Double male adapter
32492-1 Cleaning adapter for 307 faucet
PUmP-TyPe STerilizer and adaPTerS
1�
BlC - Beer line CleanerConcentrated liquid cleaner for beer and bev-erage lines. Works in all variety of cleaning equipment (pumps, pressure tank, etc). Use 1/2 oz. per quart of water.
Part No. Description
BLC 4 4 oz. Bottle
BLC 32 32 oz. BottleBLC 5G 5 Gallon Container
No. BLC 32
alC - aCid line CleanerConcentrated liquid cleaner targets calcium oxalate build-up from draft beer systems. Use 1oz. per gallon for routine cleaning. Heavy build-up may require up to 6oz. per gallon.
Part No. Description
ALC 4 4 oz. Bottle
ALC 32 32 oz. Bottle
ALC 5G 5 Gallon Container
No. ALC 32
daC - doUBle alkaline CleanerVery powerful liquid cleaner for beer and beverage systems. Formulated with twin alkaline compounds for cleaning problematic systems. Use 1oz. per gallon, 4-6 oz. for heavy soil.
Part No. Description
DAC 4 4 oz. Bottle
DAC 32 32 oz. Bottle
DAC 5G 5 Gallon Container
No. DAC 32
Pen - PeneTraTe CleanerPowerful liquid cleaner for beer and beverage systems. Formulated for routine cleaning of stubborn systems. Use 1oz. per gallon for routine cleaning.
Part No. Description
PEN 4 4 oz. Bottle
PEN 32 32 oz. Bottle
PEN 5G 5 Gallon Container
No. PEN 32
Tm deSanamaxBeer line cleaner & verifier. This is a cleaner and verification agent in powder form for all kinds of dispensing installations for beverages. During the clean-ing process the color indicates the clean status of the beverage lines.
1.�oz. TM1 Packet is good for mixing 1.2 gallons of solution
Part No. Description
TM1 1.6oz. Packet
�.2oz. TM� Packet is good for mixing 2.5 gallons of solution
Part No. Description
TM3 3.2oz. Packet
No. TM
Beer lineCleaninG eqUiPmenT
15
Brand-idenTiFied ParTy PUmPS Sturdy and easy to use. Has palm-sized handle to pump more air with less effort. Color-coordinated thermoplastic cylinder matches labeling. All metal coupler. Convenient vent button to control foaming. Includes two foot vinyl hose with nylon faucet. Easy to disassemble for cleaning. Packed in individual display cartons, 25 per case. Ship Weight: 25 oz. each.
PiSTon ParTy PUmPSSturdy and easy to use. Has palm-sized handle to pump more air with less effort. Red thermoplastic cylinder; all metal coupler. Convenient vent button to control foaming. Includes two foot vinyl hose with nylon faucet. Easy to disassemble for clean-ing. Packed in individual display cartons, 25 per case. Ship Weight: 25 oz. each
For Domestic Kegs
Part No.
40000B
For Imported Kegs
40025B
BellowS ParTy PUmP Unique polyethylene bellows seals out grit. No lubrication or O-rings required. All metal coupler. Convenient vent button to control over-foaming. Includes two foot vinyl hose with nylon faucet. Easy to disassemble for cleaning. Individually packed, 25 per case. Ship Weight: 25 oz. each
For Domestic Kegs
Part No.
40000A
For Imported Kegs
40025A
No. 40000B
No. 40000A
No. 21218A
No. 26750B
PiCniC PUmPS wiTH niCkel PlaTed BraSS FaUCeT Heavy-duty construction and materials provide years of depend-able service. Made with a nickel-plated brass pump cylinder and piston.
Picnic Pumps with Nickel Plated Brass Faucet
Part No. Description
26750B For single valve domestic kegs
21218A Universal pump less keg coupler
ParTy PUmPS
Miller Party Pumps
Part No. Description
40000B2 High Life
40000B3 Lite
40000B4 Genuine Draft
Coors Party Pumps
40000C1 Coors
40000C2 Light
1�
For BellowS and PiSTon ParTy PUmPS Item Part No. Description
1 43318 Bellows (4 per pack)
2 43437-1 Quad ring
3 43003-1 Spring for bellows
4 32697-1 Probe O-ring
5 32689-1 Probe tip
6 32699-1 Check valve
7 30040A Faucet
8 31088-2P Bottom seal washer
For 26750 & 21218 Fixed FaUCeT ParTy PUmPS Item Part No. Description
1 D10326 Handle
2 294-5 Shaft
3 24719-1 Cylinder cap
4 294-6 Cup leather
5 31088-2P Bottom seal washer
6 31087-2P Probe washer - single valve
For 26750B, 21218a ParTy PUmPS Item Part No. Description
1 32689-1 Probe tip
2 32697-1 O-ring
3 31088-2P Bottom seal washer
Item Part No. Description
4 43784 O-ring (pump piston)
5 M00501-187 Screw (four required)
mix 'n maTCH rePlaCemenT CylinderS For BellowS or PiSTon ParTy PUmPS All Perlick Party Pumps use the same high quality base. Cylinders can be interchanged by simply unscrewing the bellows or cylinder and replacing it with the brand of your choice.
Part No. Description
40098 Red
40098-2 Miller High Life
40098-3 Miller Lite
40098-4 Miller Genuine Draft
40098C1 Coors
40098C2 Coors Light
7
3
1
1
2
3
5
4
6
9
6
5
8
4
2 7
3
1
1
2
3
5
4
6
9
6
5
8
4
2
5
4
3
1
2
ParTy PUmPSrePlaCemenT ParTS
17
CarBon dioxide maximum usable pressure - 140 psig.
Part No. Description
195D Single gauge for soda
197D Twin gauge for sodaFurnished with a CO2 connection (CGA320)
rePlaCemenT ParTSPart No. Description
33-22-2P Carbonic gas drum coupling gasket
CarBon dioxide and mixed GaSmaximum usable pressure - 50 psig.Primary regulators for beer, wine, and soda are equipped with an integral, preset, tamper-proof relief valve. Beer and wine regulators include No. 44CV shut-off valve with built-in check valve. Furnished with a CO2 connection (CGA320)
Part No. Description
2922D Single gauge
2928D Twin gauge
2930D Twin gauge high pressure for beer pumps
niTroGenmaximum usable pressure - 50 psig.
Part No. Description
2923C Single gauge
2925C Twin gauge
HiGH PreSSUremaximum usable pressure - 125 psig.
Part No. Description
43833 Twin gauge high pressureFurnished with nitrogen tank fitting.
STeP down reGUlaTorTo step down high pressure CO2 from bulk tank to operating pressure of secondary regulators for beer kegs.
Part No. Description
40091A For bulk CO2
40091AHP High pressure for beer pumps-bulk tanks
No. 2928D - Twin Gauge No. 2925C
No. 197D
PrimaryreGUlaTorS
1�
Panel-moUnTed maniFoldwiTH loCk
Part No. Description
C27911E 1 Regulator
C27912E 2 Regulators
C27913E 3 Regulators
C27914E 4 Regulators
Replacement Parts for Secondary Regulators
Part No. Description
40115 Regulator body
Panel-moUnTed maniFold
Part No. Description
26171E 1 Regulator
26172E 2 Regulators
26173E 3 Regulators
26174E 4 Regulators
THree oUTleT maniFoldS for Single PumpAttaches to beer pump panel above the pump outlet
Part No. Description
40139A 3 Outlet manifold
FlojeTPart No. Description
66134-1 1-Pump panel
66134-2 2-Pump panel
66134-3 3-Pump panel
66134-4 4-Pump panel
Co2 venT kiTSBeer pumps are gas driven by either CO2 or air pressure. If CO2 gas is used, pump panels must be ordered with CO2 vent kits. The CO2 gas must be vented outside the cooler to vent dangerous high concentrations of CO2 in the walk-in cooler.
Part No. Description
63178-1 1-Pump panel
63178-2 2-Pump panel
63178-3 3-Pump panel
63178-4 4-Pump panel
Flojet Pump Replacement Parts
Part No. Description
43817 Flojet pump
63706 Flow reversal valve
Pump Cover Panels
66573-1 Single
66573-2 Dual
66573-3 Three
66573-4 Four
All secondary regulator assemblies are permanently marked with the maximum set pressure for that regulator.
maniFoldS only Part No. Description
26161C 1 Regulator
26162C 2 Regulators
26163C 3 Regulators
26164C 4 Regulators
No. 26162C
No. 26172E
No. C27912C
No. 66134-2
SeCondary reGUlaTorSBeer PUmP PanelS
1�
mCdanTim'S TrUmix Co2-niTroGen Blender
An extremely accurate Nitrogen CO2 Blender. Available in single or double blend unit preset at the factory. Provided with a 1⁄4" female pipe thread connection for use with any fitting required.
Part No. Description
665 Single blender- 40% N2-60% CO2
667 Single blender- 75% N2-25% CO2
668 Double blender- 75% N2-25% CO2 40% N2-60% CO2
niTroGen/Co2 Blenderincludes 20 feet of reinforced poly tubing
Part No. Description
664B Nitrogen/CO2 blender
air GaUGeSwiTH 2" FaCe 1⁄4" male PiPe ConneCTion.
Right-hand Thread
Part No. Description
2487R 0-60 lb.
2488R 0-300 lb.
2489R 0-3000 lb.
Sidemount (0-�000 Lb.)
2489ARLH Left-hand thread
Sidemount (0-�000 Lb.)
2490R Right-hand thread
2490RLH Left-hand thread
Center Back Connection
C12303 0-30 lb.
C22228 0-60 lb.
niTroGen GeneraTorWhy use expensive bottled gas when Perlick’s Nitrogen Generator can produce enough nitrogen (when mixed with CO2) to dispense up to six half barrels per hour. 20 gallon ASME certified tank.
Part No. Description
669N Nitrogen generator
niTroGen reTroFiT kiTAn economical way to convert air compressor into a nitrogen generator. For use with a Perlick 1⁄4 h.p. air compressor only.
Part No. Description
669N-RF Nitrogen retrofit kit
No. 2487R
No. 664B
No. 668
air/GaSdiSTriBUTion eqUiPmenT
in-line GaS leak indiCaTorPart No. Description
67114 In-line leak indicator
20
SHUT-oFF valve Zinc die cast, nickel plated.
Part No. Description
44CV With check valve
44 Less check valve
SaFeTy relieF valve* 5⁄16" hose tailpiece inlet and out-let
Part No. Description
32644-60 60 lb. In-line relief valve
reTroFiT SaFeTy relieF valve*1⁄4" male x 1⁄4" female NPT
Part No. Description
43815-1 53 lb. Retrofit relief valve
miSCellaneoUS aCCeSSorieSPart No. Description
33-22-2P Carbonic gas drum coupling gasket
Part No. Description
57 Nickel-plated brass air hose nipple 1⁄4" pipe thread and 5⁄16" ID hose
59 Nickel-plated brass tee for 5⁄16" ID air hose
No. 20852-2 No. 32644-60
No. 43815-1
No. 57 No. 59
*IMPORTANT: Existing safety codes recommend the installation of two safety relief valves in every pressurized beverage system; one in the outlet of the primary regulator and the second in the gas sys-tem upstream of the product tanks. If you will use No. 43815-1 as a second relief valve, our entire line of manifolds and secondary regulator assemblies can be ordered with-out a relief valve. To order without a relief valve, add suffix letters "LV" to part number and deduct $13.33 from the price.
No. 20852-3
air/GaSdiSTriBUTion eqUiPmenT
Part No. Description
20852-1 1 Shut off
20852-2 2 Shut offs
20852-3 3 Shut offs
20852-4 4 Shut offs
20852-5 5 Shut offs
air diSTriBUTor wiTH SHUT oFF and 53 lB. SaFeTy relieF valve*
21
vinyl BeveraGe TUBinGBlaCk or TranSlUCenT
NSF APPROVED - FDAAPPROVED MATERIALS
Sold in 100 foot reels only. Priced per foot.
air TUBinGred or TranSlUCenT
Sold in 100 foot reels only. Priced per foot.
200- 500 Red Translucent
BlackPart No.
TranslucentPart No. Description
1384BL 1384TR 3⁄16" ID
1386BL 1386TR 1⁄4" ID
1387BL 1387TR 5⁄16" ID
1388BL 1388TR 3⁄8" ID
1390BL 1390TR 1⁄2" ID
1390D* — 1⁄2" ID
TUBe CUTTer Bulk packed
Part No. Description
1368 Tubing cutter
STraiGHT SPliCerSFor vinyl or Poly TUBinG
BraSS niCkel-PlaTed TailPieCeS For vinyl TUBinG
Part No. Description
2064-1 For 3⁄16" ID vinyl
2065-1 For 1⁄4" ID vinyl
2068-1 For 5⁄16" ID vinyl
2066-1 For 3⁄8" ID vinyl
2067-1 For 1⁄2" ID vinyl
BraSS niCkel-PlaTed nUTS For Poly or vinyl TUBinG
Part No. Description
2072 Wing nut
2026 Hex nut
STainleSS STeel HoSe FiTTinGSPart No. Description
C15182-1 1⁄4" x 1⁄4" Hose union
57040 3⁄8" x 1⁄4" Hose union
C15179-1 3⁄8" x 3⁄8" Hose union
C13090 1⁄4" x 1⁄4" x 1⁄4" Tee
C33040 3⁄8" x 3⁄8" x 3⁄8" Tee
C33041 3⁄8" x 3⁄8" x 1⁄4" Tee
C13135 1⁄4" x 1⁄4" x 1⁄4" x 1⁄4" Cross
C33042 1⁄4" Male flare x 1⁄4" hose adapter
No. 1386TR No. 1386BL
No. 1392R
No. 2026 No. 2072
No. 2064-1
No. 2372
No. C33041 No. 57040
TUBinG and FiTTinGS
RedPart No.
TranslucentPart No. Description
1392R 1392TR 5⁄16" ID
Part No. Description Vinyl Poly
30748-1 — 3⁄16" to 1⁄4" ID
31075-1 — 3⁄16" to 5⁄16" ID
31076-1 3⁄16" to 1⁄4" ID —
2372 3⁄16" to 3⁄8" ID —
2373 1⁄4" to 1⁄4" ID —
3094 1⁄4" to 5⁄16" ID —
2374 1⁄4" to 3⁄8" ID —
2375 3⁄8" to 3⁄8" ID —
* Anti-Microbial drain tubing resists bacterial growth and reduces offensive drain odors.
22
CoUPlinG waSHerSBulk packed or in bags of 100.
Part No. Description
157N2P Neoprene washer
157L2P Leather washer
157R2P Rubber washer
Barrier TUBinGSold in 100 foot reels only. Priced per foot.
reinForCed Poly TUBinGSold in 100 foot reels only.
Part No. Description
C14229B 1⁄4" ID
C14230B1 3⁄8" ID
BraSS niCkel-PlaTed TailPieCeS For Poly TUBinG
Part No. Description
30745-1 For 3⁄16" ID poly
30746-1 For 1⁄4" ID poly
31096-1 For 5⁄16" ID poly
30747-1 For 3⁄8" ID poly
Poly BeveraGe TUBinG oPaqUe
NSF APPROVED - FDAAPPROVED MATERIALS
Sold in 100 foot reels only. Priced per foot.
No. 6002
No. 30746-1
No. 157R2P
Part No. Description
C13091-1N 3⁄8” coolant loop
C24109-1 Stainless steel 3⁄8” elbow
C31573 Poly hanger strap kit
61082-1 Aluminum hanger bracket
C15392 Adhesive – 1⁄2 pint can
miSCellaneoUS FiTTinGS
TUBinG and FiTTinGS
Part No. Description
6003 1⁄4" ID poly
6005 5⁄16" ID poly
6004 3⁄8" ID poly
Part No. Description
63000B-1 3⁄8" ID
2�
wall BraCkeTS
Part No. Description
512A2 Two threaded ends 3⁄8" bore
63634 Single stainless steel bracket 3⁄8" bore hose tailpiece both ends
vinyl ConneCTorSBlaCk or TranSlUCenTBulk packed
BlackPart No.
Translucent Part No. Description
529 529TR 3⁄16" x 31⁄2'
530 530TR 3⁄16" x 4'
532 532TR 3⁄16" x 5'
548 548TR 3⁄8" x 3'
550 550TR 3⁄8" x 4'
552 552TR 3⁄8" x 5'
554 554TR 3⁄8" x 6'
556 556TR 3⁄8" x 10'
No. C33054 No. 32659-56
No. 552
No. 3079
No. 63634
HoSe ClamPS, FiTTinGSvinyl ConneCTorS
one ear STePleSS ClamP For Vinyl Tubing-Stainless Steel
Part No. Tubing I.D. Clamp No.
43805-2 3⁄16" ID 133
43805-3 1⁄4" ID 145
C31958 5⁄16" ID 157
C33010 5⁄16" ID 170
one ear STePleSS ClamPFor Poly Tubing-Stainless Steel
Part No. Tubing I.D. Clamp No.
C33037 1⁄4" ID 140
C33053 1⁄4" ID bundle 105
C31958 3⁄8" ID 157
43805-3 3⁄8" ID bundle 145
one ear ClamPFor Vinyl Tubing - Steel
Part No. Tubing I.D. Clamp No.
1359 3⁄16" ID 133
1360 1⁄4" ID 145
1361 5⁄16" ID 170
1362 3⁄8" ID 185
1363 1⁄2" ID 226
Two ear ClamPFor Vinyl Tubing - Steel
Part No. Tubing I.D. Clamp No.
43803-1 3⁄16" ID 13
43803-2 1⁄4" ID 15
43803-3 5⁄16" ID 18
43803-4 3⁄8" ID 20
PlaSTiC SnaP ClamPSFor Vinyl
Part No. Tubing I.D.
32659-43 3⁄16" ID
32659-56 5⁄16" ID
STainleSS STeel worm drive ClamPSPart No. Tubing I.D.
3079 3⁄16" to 3⁄8" ID
3080 3⁄8" to 1⁄2" ID
one ear CrimPinG Tool Part No. Tubing I.D.
1358 Pliers with cutout
1358C Pliers less cutout
oeTiker ClamP PoCkeT kiT Part No. Tubing I.D.
43806 Pocket Kit (contains 15 each 3⁄16”, 1⁄4” 5⁄16” and 3⁄8” clamps - 5 each 3⁄16” and 1⁄4” hose menders for vinyl tubing. 1 crimping tool.
Translucent Part No. Description
43686-72TR 3⁄8" x 6' Fitting one end
No. 512A2
2�
STainleSS STeel elBow ConneCTorS Bulk packed
Part No. Description
2036SS 3⁄8" Bore
SPliT leG aPronIdeal for heavy work. Waterproof, rubberized thigh pads. Tough, durable and water repellent. Roomy divided breast pocket. Adjustable shoulder and waist straps. Riveted, double-stitched patches. 28" Long x 36" Wide.
Part No. Description
3410 Split leg apron
reFriGeraTor ConverSion kiTSConverts a working refrigerator into a draft beer dispenser. Kit Includes asingle gauge regulator, 5 lb. CO2 drum, air line, beer faucet with shank, tapping coupler and all necessary fittings.
Part No. Description
23875A For single valve kegs
No. 2036SS
air Cooled wall moUnTed diSPenSinG HeadSair Cooled wall moUnT diSPenSinG HeadSStainless steel wall mount towers include a built-in drainer. The 2 and 4 faucet model is 121⁄4” wide and the 6 and 8 faucet model is 23” wide.
2 & 4 FaUCeT wall moUnT diSPenSerPart No. Description
3774A2B 2 Faucet stainless steel dispenser with drainer
3774A4B 4 Faucet stainless steel dispenser with drainer
6 & 8 FaUCeT wall moUnT diSPenSerPart No. Description
3775A6B 6 Faucet stainless steel dispenser with drainer
3775A8B 8 Faucet stainless steel dispenser with drainer
3774-4B Air Cooled Wall
Mounted Dispenser
BeveraGe line FiTTinGS
Part No. Description
132B Distributing Y 3⁄8" bore
625-2 Wall mount Y fitting 3⁄8" bore
43818-1 3⁄8" Bore stainless steel U bend Y fitting
No. 132B No. 43818-1 No. 625-2
TaPeSPart No. Description
C15393 6 yd. Roll - 1⁄2" filament tape
C15312 60 yd. Roll - 1⁄2" filament tape
C15394 6 yd. Roll - 2" clear polytape
C15311 36 yd. Roll - 2" clear polytape
C15699 6 yd. Roll - 2" black polytape
C15698 36 yd. Roll - 2" black polytape
Part No. Description
63932 3⁄8" Bore stainless steel U bend Y fitting, less bracket
FiTTinGS, TaPeHome diSPenSinG eqUiPmenT
25
No. 858-408
No. 858D408-408
draFT armS - air CooledThrow away your brass polish. Perlick Draft Arm dispensing heads are now available in tarnish-free polished brass that stays looking like new without tedious polishing. All Perlick Draft Arms are equipped with a stainless steel supply tube with male Cleveland thread connection. Air baffle included. Faucet knob not included. Available in polished chrome and tarnish-free polished brass.
Part No. Description
858-408 1 Faucet - polished chrome
858-408TF 1 Faucet - tarnish-free polished brass
858D408-408 2 Faucet - polished chrome
858D408-408TF 2 Faucet - tarnish-free polished brass
3722 3 Faucet - polished chrome
3722TF 3 Faucet - tarnish-free polished brass
C15747-1 Air baffle for 1211⁄16" heads
C23896-1 Air baffle for 3722 series heads Note: All draft arms are 1211⁄16" high (9 7⁄16" to faucet) except 3722/3722TF which are 1" higher. Extra high draft arms are available; call Perlick for part numbers and prices. To substitute No. 307 Flow Control Faucets (see page 3), contact Perlick for part numbers and prices.
Tee TowerS - air CooledThrow away your brass polish. Perlick tarnish-free polished brass stays looking like new without tedious polishing. Perlick Tee Towers are available in polished chrome, stainless steel and tarnish-free polished brass. Height: 13" Faucet Centers: 23⁄4"
Part No. Description Width
3780-3B 3 Faucet - stainless steel 91⁄4"
3780-4B 4 Faucet - stainless steel 12"
3780-5B 5 Faucet - stainless steel 143⁄4"
3780-6B 6 Faucet - stainless steel 173⁄4"
3780-3BPC 3 Faucet - polished chrome 91⁄4"
3780-4BPC 4 Faucet - polished chrome 12"
3780-5BPC 5 Faucet - polished chrome 143⁄4"
3780-6BPC 6 Faucet - polished chrome 173⁄4"
3780-3BTF 3 Faucet - tarnish-free polished brass 91⁄4"
3780-4BTF 4 Faucet - tarnish-free polished brass 12"
3780-5BTF 5 Faucet - tarnish-free polished brass 143⁄4"
3780-6BTF 6 Faucet - tarnish-free polished brass 173⁄4"
No. 4135
No. 4136 No. 4134
wrenCHeS For draFT armS Part No. Description
4134 For one faucet
4135 For two divided faucets
4136 For two parallel faucets
No. 3780-5B
diSPenSinG HeadS
2�
lUCky/PanTHer air Cooled TowerSFeatures an all metal polished chrome or gold tone body. Lucky is available with one or two faucets in polished chrome or tarnish-free gold tone. Panther is available with three or four faucets in polished chrome or tarnish-free gold tone. Black Handles are not included.
Air Cooled Lucky and Panther Towers
Part No. Description
3890-1B 1 Faucet Lucky polished chrome air cooled tower
3890-2B 2 Faucet Lucky polished chrome air cooled tower
3895-3B 3 Faucet Maxi Panther polished chrome air cooled tower
3895-4B 4 Faucet Maxi Panther polished chrome air cooled tower
3890GD-1B 1 Faucet Lucky gold tone air cooled tower
3890GD-2B 2 Faucet Lucky gold tone air cooled tower
3895GD-3B 3 Faucet Maxi Panther gold tone air cooled tower
3895GD-4B 4 Faucet Maxi Panther gold tone air cooled tower
No. 3890-2B
Drip Pans Sold Separately
No. 3895GD-3B
Drip Pans Sold Separately
lUCky/PanTHer driP PanS
Drip Pans for Lucky and Panther Towers
Part No. Description
43839SS 16” x 16” Stainless steel drip pan
43839G 16” x 16” Gold tone drip pan
43840SS* 16” x 231⁄4” Stainless steel drip pan
43840G* 16” x 231⁄4” Gold tone drip pan
Drip Pan
diSPenSinG HeadS
* Not recommended for two 4 faucet Panthers.
27
Equipped with a four inch, 1⁄2” O.D. drain socket and a removable glass rack.driP PanS
6230x Cutout Drainers.eps
No. C18635A
No. 5020
No. C21379A
No. 57120
No. 62303
No. 3713-1
UnderBar driP PanS For SPaCeSaver HeadSPart No. Description
3713 13” Drip pan w/skirt
3713-1 13" Drip pan only
3721 21” Drip pan w/skirt
3721-1 21" Drip pan onlywall moUnTed driP PanS For 670 SerieSPart No. Description Faucet Centers
670 0 Holes —
670-2 2 Holes —
670-3 3 Holes 6"
670-4 4 Holes 4"
670-5 5 Holes 3"
670-6 6 Holes 23⁄4"
anGled driP PanSPart No. Description Length Width
57120 Stainless steel 191⁄4" 61⁄2"
57120TF Tarnish-free brass 191⁄4" 61⁄2"Note: Not for use with 6 faucet Gambrinus.
CUToUT driP PanSPart No. Head Type Head Diam. Length Width
62303 Brass Roma, Gambrinus 81⁄2" 193⁄4" 10"
62303SS Stainless steel Roma, Gambrinus 81⁄2" 193⁄4" 10"
62304 Brass Torino 10" 193⁄4" 10"
No. 670-3
No. 3713
driP PanS and SPaCeSaverdrainerS
Top Mounted Drip Pans
Stainless Steel
Part No
C18635A
C18640A
C18645A
C18650A
C18655
C18660 - 73⁄4" x 469⁄16"
5015
5020
5025
5028
5030
Top Mounted Drip Pans
Tarnish-free Polished Brass
Part No Width x Length
C18635ATF 73⁄4" x 83⁄4"
C18640ATF 73⁄4" x 143⁄16"
C18645ATF 73⁄4" x 203⁄4"
C18650ATF 73⁄4" x 263⁄4"
C18655TF 73⁄4" x 33"
— —
5015TF 47⁄8" x 53⁄8"
5020TF 47⁄8" x 133⁄4"
5025TF 47⁄8" x 19"
5028TF 47⁄8" x 24"
5030TF 47⁄8" x 37"
Recessed Drip Pans
Stainless Steel
Part No
C11988A
C21379A
C32257
C32357
58979
Recessed Drip Pans
Tarnish-free Polished Brass
Part No Width x Length
C11988ATF 75⁄8" x 83⁄4"
C21379ATF 75⁄8" x 1413⁄16"
C32257TF 75⁄8" x 205⁄8"
C32357TF 51⁄8" x 1813⁄16"
58979TF 51⁄8" x 375⁄16"
2�
THrU-THe-wall air SHaFTSFor installations up to 6 feet longA full line of air shafts is available for short run installations up to six feet long, complete with a mounting collar for the dispensing head, 15 CFM blower and bracket and balanced bever-age lines. Prices reflect six foot lengths. Shafts under two feet long are equipped with 3⁄16" I.D. beverage lines four feet long. All other shafts are furnished with balanced connectors nine feet long that can be cut off and sized on the job site.
air SHaFTS For wall-moUnTed diSPenSinG HeadSPart No. Description
3812-1B 1 Beverage line
3812-2B 2 Beverage lines
3812-3B 3 Beverage lines
3812-4B 4 Beverage lines
3812-5B 5 Beverage lines
air SHaFTS For CoUnTer-moUnTed diSPenSinG HeadSPart No. Description
3814EL1B 1 Beverage line
3814EL2B 2 Beverage lines
3814EL3B 3 Beverage lines
3814EL4B 4 Beverage lines
3814EL5B 5 Beverage lines
Blower kiTPart No. Description
C14052 Blower kit
C14039 12CFM Blower (only)
C14043 Elbow adapter assembly
C22308 3’ x 11⁄8" I.D. tubing
Air-cooled beer system efficiency depends on temperature. It is impor-tant to use the cooler for beer storage only so that a consistent tem-perature between 34° and 38° F. can be main-tained. The maximum recommended length is 25 feet requiring 1,000 BTU/hr. of additional refrigeration capacity.
Air shafts are available from Perlick in 12 foot lengths, 51⁄2" O.D., insulated at the factory and consist of a tube within a tube. They can be easily installed in the field using the below listed parts. For systems that are six feet or less, see "Thru-the-Wall Air Shafts" listed below. For dispensing heads and drainers, see pages. 20 and 21.
dUal dUCT air SHaFTS and aCCeSSorieS
No. C24714-1
No. 3820
No. 3812-4B No. 3814EL4B
No. C14052
air CooleddiSPenSinG SySTemS
Item No. Part No. Description
1 C23907 Mounting collar for dispensing head
2 3820* Dual air shaft (12 foot section)
3 C26609 Wall-mounted air duct connector assy.
4 1655R Blower
5 C16817A1 Blower hanger bracket (2 required)
C15366-1 1 Line coupler for 3" hose sections
C24459-1 1 Line coupler for 41⁄2" outer hose sections
C15365-1 3" Hose to duct air from cooler blower todual hose air shaft (12 feet long)
C15394 2" Waterproof tape (18 foot roll)
C15392 Adhesive for insulated outer tube
C24715A 3" Hose adapter for 1655R blower
C26612 90° Insulating elbow
C24714-1 Sealing gasket w/adhesive back
*Beverage lines not included.
2�
imPorTed keG CoUPlerS Imported keg couplers include U.S. thread adapter.
Part No. Description
63907 G system for Bass, Anchor Steam and Boddington
63909 A system for Warsteiner, Spaten and Paulaner
63908 U system for Guinness and Harp
imPorTed SToUT and ale FaUCeT Part No. Description
63927 Stout & Ale Faucet stainless steel body and spout
63928Stout & Ale Faucet brass plated stainless steel body and stainless steel spout
No. 63907
No. 63908
No. 63909
No. 63927
aSSorTed aCCeSSorieS
liFT kiTSFor existing towers to be raised for use with Turbo-Taps.
Part No. Description
63916 2” Tee Tower Lift Kit, stainless steel
63875 4” Tee Tower Lift Kit, stainless steel
63919 2” Tee Tower Lift Kit, chrome
63920 4” Tee Tower Lift Kit, chrome
63917 2” Tee Tower Lift Kit, brass
63918 4” Tee Tower Lift Kit, brass
63914 2” Draft Arm Lift Kit, chrome
63915 4” Draft Arm Lift Kit, chrome
63912 2” Draft Arm Lift Kit, brass
63913 4” Draft Arm Lift Kit, brass
SUlli PlUGSPlastic plug tightly seals faucet when not in use. Nylon brush provides additional cleaning.
Part No. Description
63929 Sulli plugs
3” Dia. Draft Arm Lift Assembly
6” Square Tee Tower Lift Assembly
No. 63929
�0
�1
8300 West Good Hope Road • Milwaukee, WI 53223 • Phone 414-353-7060 • Fax 414-353-7069Toll Free 800-558-5592 • E-Mail: [email protected] • www.Perlick.com