targetpro 4.7 canada install guide - pitney...

TargetPro®

Canada Version 4.7

INSTALL GUIDE

Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor or its representatives. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, without the written permission of Pitney Bowes Software Inc., One Global View, Troy, New York 12180-8399.© 2010 Pitney Bowes Software Inc. All rights reserved. MapInfo, the Pitney Bowes MapInfo logo, and TargetPro are trademarks of Pitney Bowes Software Inc. and/or its affiliates. Americas:Phone: (518) 285-6000Fax: (518) 285-6070Sales: (800) 327-8627Government Sales: (800) 619-2333Technical Support: (518) 285-7283Technical Support Fax: (518) 285-6080www.mapinfo.comContact information for all Pitney Bowes MapInfo offices is located at: http://www.mapinfo.com/contactus.Xceed by Xceed Software Inc. (c) 1995-2010. All Rights Reserved.TrueDBGrid Library by APEX Software Corporation (c) 1991, 1998. All Rights Reserved.ACtive Directory, Active X, BackOffice, CodeView, Developer Studio, FoxPro, JScript, Microsoft, Microsoft Press, Microsoft SQL Server, MSDN, MS-DOS, Outlook, PivotChart, PivotTable, PowerPoint, Visual Basic, Visual C++, Visual Studio, Win32, Windows 2000, Windows, Windows NT, and Windows XP are either registered trademarkes or trade marks of Microsoft Corporation in the United States and/or other countries.Portions (c) Copyright 2010 Microsoft Corporation. All rights Reserved.The DMA Boundaries and DMA data contained herein are owned solely and exclusively by, and are used herein pursuant to a license from, Nielsen Media Research Inc. Any use and/or reproduction of these materials without the express written consent of Nielsen Media Research Inc. is strictly prohibited. The DMA boundaries and DMA data are effective for the period 2003-2010.libtiff © 1988-1997 Sam Leffler, copyright © Silicon Graphics, Inc.libgeotiff © 1995 Niles D. Ritter.Portions © 1999 3D Graphics, Inc. All Rights Reserved.HIL - Halo Image Library © 1996, Media Cybernetics Inc. Halo Imaging Library is a trademark of Media Cybernetics, Inc.Portions thereof LEAD Technologies, Inc. © 1991-2010. All Rights Reserved.Portions © 1993-2010 Ken Martin, Will Schroeder, Bill Lorensen. All Rights Reserved.ECW by ER Mapper © 1993-2010VM Grid by Northwood Technologies, Inc., a Marconi Company © 1995-2010.Portions © 2010 Earth Resource Mapping, Ltd. All Rights Reserved.MrSID, MrSID Decompressor and the MrSID logo are trademarks of LizardTech, Inc. used under license. Portions of this computer program are copyright © 1995-2010 LizardTech and/or the university of California or are protected by US patent nos. 5,710,835 or 5,467,110 and are used under license. All rights reserved. MrSID is protected under US and international patent & copyright treaties and foreign patent applications are pending. Unauthorized use or duplication prohibited.Contains FME ® Objects; © 2010 Safe Software, Inc.Crystal Reports ® is proprietary trademark of Crystal Decisions. All Rights Reserved.Portions © Tele Atlas, Inc (GDT, Inc.)Adobe Acrobat® is a registered trademark of Adobe Systems Incorporated in the United States.Products named herein may be trademarks of their respective manufacturers and are hereby recognized. Trademarked names are used editorially, to the benefit of the trademark owner, with no intent to infringe on the trademark.May 2010

http://www.mapinfo.com

http://www.mapinfo.com/contactus

Install Guide 3

Table of Contents

About this Book. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Product Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Chapter 2: Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Server Space Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Client Space Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10SQL Server Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Installation Components and Versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Pre-Installation Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Plan the TargetPro Canada 4.7 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Remove Old Versions of Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Set Your Computer’s Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Prepare to Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Installing TargetPro U.S. and Canada on the Same Computer. . . . . . . . . . . . . . . . . . .14

Chapter 3: Server Installation – New Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Installing the Server Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Installing the Server Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Installing the Latest TargetPro Service Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Removing TargetPro Canada 4.7 Server Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Chapter 4: Client Installation – New Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Installing the Client Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Installing SQL Server Client Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Installing Multiple Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Installing the Client Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Installing the Latest TargetPro Service Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Removing TargetPro Canada 4.7 Client Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Table of Contents

4 TargetPro Canada 4.7

Chapter 5: Upgrading Data on TargetPro Canada 4.7. . . . . . . . . . . . . . . . . . . . . . 33Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Upgrading the Server Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Upgrading the Client Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Installing the Latest TargetPro Service Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Appendix A: Geography Levels Available in TargetPro . . . . . . . . . . . . . . . . . . . . 45KEY Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Geographic Level Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

1Introduction

Welcome to MapInfo® TargetPro® Canada version 4.7.

This document tells you how to install TargetPro Canada 4.7, or upgrade an existing TargetPro Canada installation. Refer to the User Guide for information about how to use TargetPro Canada.

In this section:

About this Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Product Inventory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Product Inventory


About this BookThis document provides installation instructions for first-time users of TargetPro Canada and users upgrading data from TargetPro Canada 4.7. This book has the following chapters:

Chapter 1: Introduction

Provides information about the documentation, and other components that make up the product.

Chapter 2: Pre-Installation

Provides information about tasks that should be performed before starting to install TargetPro Canada 4.7. It also gives information about how to plan the installation, including system requirements and space requirements.

Chapter 3: Server Installation – New Users

Provides information about installing TargetPro Canada 4.7 Server Software and Data for the first time. It is split into two parts:

• Installing the Server Software on page 16• Installing the Server Data on page 18

Chapter 4: Client Installation – New Users

Provides information about installing TargetPro Canada 4.7 Client Software and Data for the first time. It is split into two parts:

• Installing the Client Software on page 26• Installing the Client Data on page 28

Chapter 5: Upgrading Data on TargetPro Canada 4.7

This chapter provides full instructions for upgrading data on TargetPro Canada 4.7.

Product InventoryThe TargetPro Canada product box contains a set of DVDs that have all the information you need to install, upgrade, set up, and run TargetPro Canada 4.7. The product components are as follows.

New Installation

The following is shipped to new customers or existing TargetPro Canada 4.7 customers updating software and data.

Media:

• Supporting Files CD – Contains the license file and other files required in the data installation procedure.

• TargetPro Canada Server Software – Contains all the components necessary to install or upgrade TargetPro Canada Server.

Chapter 1:

Install Guide 7

• TargetPro Canada Server Data (including the Postal CD) – Contains the data to install or upgrade the Server.

• TargetPro Canada Client Software – Contains all the components necessary to install or upgrade the TargetPro Canada Client.

• TargetPro Canada Client Data – Contains the data to install or upgrade the Client.• TargetPro Service Pack – Contains the latest TargetPro patches and updates.

Documentation:

• Installation Guide (this document) and User Guide – Refer to Documentation on page 7.

Maintenance Installation

The following is shipped to existing TargetPro Canada 4.7 customers updating data.

Media:

• Supporting Files CD – Contains the license file and other files required in the data installation procedure.

• TargetPro Canada Server Data (including the Postal CD) – Contains the data to install or upgrade the Server.

• TargetPro Canada Client Data – Contains the data to install or upgrade the Client.

Documentation:

• Installation Guide (this document) – Refer to Documentation on page 7.

DocumentationTargetPro documents are made available for download on the MapInfo website athttp://www.mapinfo.com/docs. The documentation provided with TargetPro Canada is as follows.

Release Notes

Read these notes before installing TargetPro Canada. They describe known issues with TargetPro Canada and other release-related details.

TargetPro Canada Installation Guide (this document)

This document is a guide to help you install TargetPro Canada or update your existing TargetPro Canada installation.

TargetPro Canada 4.7 User Guide

This document is a guide designed to help you use TargetPro Canada to the fullest and explains all the features of the product. Read it before launching TargetPro Canada.

http://www.mapinfo.com/docs

Documentation


Online Help

In addition to the printed and PDF manuals, TargetPro Canada also comes with an online help system. The online help is available whenever you run TargetPro Canada. It provides integrated information about both MapInfo Professional and TargetPro Canada tasks and functionality. To access the Help system, start TargetPro Canada and choose from the Help drop-down menu, or click the Help button in any of the dialog boxes in the application interface.

2Pre-Installation

Read the instructions in this chapter before installing TargetPro Canada 4.7. These instructions outline the necessary system requirements for the computer where you are installing TargetPro Canada 4.7, and gives information about tasks to perform before beginning the installation.

In this section:

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Installation Components and Versions . . . . . . . . . . . . . . . . . . . . .11Pre-Installation Tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Installing TargetPro U.S. and Canada on the Same Computer . .14


System RequirementsTargetPro Canada Server and Client can reside on the same computer, or you can install multiple TargetPro Canada Client computers to access a single Server. The computer(s) must have:

• One of the following operating systems:

Windows 2000 Professional with Service Pack 4Windows 2000 Server with Service Pack 4Windows 2000 Advanced Server with Service Pack 4Windows 2003 Server Standard Edition with Service Pack 1Windows 2003 Server Enterprise Edition with Service Pack 1Windows XP Professional with Service Pack 2

• A 256 color XGA or better resolution monitor with 1024 by 768 pixels.• A CD or DVD-ROM drive for the installation of data and software.• Microsoft Internet Explorer 5.5 with Service Pack 2, or higher.• Enough disk space for a Server installation; refer to Server Space Requirements.• Enough disk space on the C drive for the installation. In any installation, some files are always

installed to the C drive.• Administrator privileges on the computer where you are installing TargetPro Canada.

Server Space RequirementsEnsure you have enough disk space on your computer for the Server Software and data. The TargetPro Canada Server Software needs 400 MB (150 MB of this is on the C drive) but the data requirements depend on the amount of data you have purchased and licensed. The data that ships standard with TargetPro Canada can reach in excess of 3.5 GB.

Any supplemental data sets you license such as Census, Consumer Spending Potential will increase these requirements. Further space will also be necessary for the addition of customer or boundary data to the system.

Note If using your own data, in addition to MapInfo data for TargetPro Canada, then consider its space requirements as well.

Client Space RequirementsTargetPro Canada requires space on the local drive for all types of installation. The Client Software requires a maximum of 250 MB of drive space. The Client Data requires a maximum of 700 MB of space. To minimize the amount of space you will need on the drive, you can install the Client Data to a different location.

The following scenarios show the various space requirements on the local drive.

• Default installation.

The Client Software and Data are installed to C:\Program Files\MapInfo\TargetPro Canada, and C:\Program Files\MapInfo\TargetPro Canada\Data respectively.

Requires up to 1 GB space on the C drive, depending on the amount of data you install.


Install Guide 11

• Client Software installed to the default path of C:\Program Files\MapInfo\TargetPro Canada. The Client Data installed to a different local drive.

Requires 250 MB disk space on the C drive and 700 MB on a separate local drive for the boundary and geocoding data.

• Client Software and Data both installed to a local drive other than C.

Requires 500 KB disk space on C (some components are installed by default onto the C drive). The rest of the installation takes up to 1 GB depending on the amount of data.

SQL Server RequirementsIf you already have Microsoft SQL Server 2000 installed on your computer, and want to use it with TargetPro Canada 4.7 it should be configured with the following settings:

• Case insensitive code page.• Support for both Windows and SQL Server authentication connection modes.

Installation Components and VersionsTargetPro Canada is composed of two parts: the Server and the Client. Both have data associated with it, resulting in four distinct installation components:

• Server Software• Server Data• Client Software• Client Data

Server Software

The Server Software portion of TargetPro Canada consists of the following components:

• TargetPro Canada Server version 4.7 including software, database tables, and stored procedures.

• Microsoft SQL Server 2000 Service Pack 3. Either the Personal or Standard edition is installed depending on the operating system you are running.

• MapInfo SpatialWare version 4.8.721.

Server Data

The Server Data portion of TargetPro Canada consists of the following components:

• TargetPro Canada 2009 Data• Report Templates• Metadata Patches

Client Software

The Client Software portion of TargetPro Canada consists of several components:

• TargetPro Canada Client version 4.7

Pre-Installation Tasks


• MapInfo Professional version 7.8• Crystal Reports run-time files• MapMarker 6.3 Canada geocoding engine

If you are performing a new installation and you have these components already installed on your computer, refer to Remove Old Versions of Software on page 13.

Client Data

The Client Data portion of TargetPro Canada consists of several components:

• Boundary Files• GeoData• Drive Time • Workspace

Pre-Installation TasksReview the topics in this section before performing a TargetPro Canada installation or data upgrade.

Plan the TargetPro Canada 4.7 InstallationTargetPro Canada Server and Client can reside on the same computer, or you can install multiple TargetPro Canada Client computers to access a single Server.

New Installation

Follow these instructions if you are installing both the Client and Server for the first time:

• Installing the Server Software on page 16• Installing the Server Data on page 18• Installing the Client Software on page 26• Installing the Client Data on page 28• Installing the Latest TargetPro Service Pack on page 31

Upgrade Installation

If you are upgrading an existing Server or Client installation of TargetPro Canada, follow the instructions in Upgrading Data on TargetPro Canada 4.7 in Chapter 5 on page 33.

Default or Named Instance Installations

TargetPro Canada 4.7 can be installed on a default or named instance of SQL Server. SQL Server 2000 lets you run multiple instances on the same computer; these may be either default or named instances, or both. This allows you to group common application tasks to be served by a specific SQL Server instance. Each instance of SQL Server 2000 has its own folder location for its copy of program and data files.


Install Guide 13

A default instance is identified by the network name of the computer alone. You can have a maximum of one default instance. A named instance is identified by the computer name and an instance name as follows: computer_name\instance_name. It is possible to have multiple SQL Server 2000 named instances, with or without a default instance.

Remove Old Versions of SoftwareThis section applies to new installations, or if reinstalling TargetPro software.

Before you start the installation, it is recommended that you remove old versions of software that were installed by previous versions of TargetPro Canada or installed separately.

• If you have MapInfo Professional 7.5 or earlier installed, remove it before installing the TargetPro Canada Client. TargetPro Canada will install the version it requires.

• If you have SQL Server 7.0 or earlier installed on a server computer, remove it before installing TargetPro Canada Server to the same computer.

Set Your Computer’s LanguageThe default character set on the computer where you want to install TargetPro Canada should be set to Canada.

To set the language:

1. On the Microsoft Start menu, click Control Panel.

2. Click Regional and Language Options from the Control Panel, and then click the Regional Options tab.

Regional and Language Options Dialog

Installing TargetPro U.S. and Canada on the Same Computer


3. Scroll through the Locale list to ensure English is selected.

4. Scroll through the Location list to ensure Canada is selected.

5. Click the Advanced tab.

6. Scroll through the Language for non-Unicode programs list to ensure English is selected.

7. Click Apply and then OK.

Prepare to InstallThere are several things you should do before installing TargetPro Canada Server or Client:

• Reboot your computer before starting the installation process.• Log in as an Administrator or as a user with Local System Admin rights.• Close all programs you currently have running.• Disable any anti-virus software running on the computer.

Installing TargetPro U.S. and Canada on the Same ComputerThis version allows you to install TargetPro 4.7 U.S. and Canada on the same computer through the use of a SQL Server named instance. If you have purchased both TargetPro Canada and U.S., you can use them together on the same SQL Server database.

To install TargetPro Canada 4.7 and TargetPro U.S. 4.7 on the same computer, assuming no previous versions of TargetPro Canada or U.S. have been installed on the computer:

1. Install TargetPro Canada 4.7 Server as described in Server Installation – New Users on page 15.

During the Server installation, perform a Typical setup and install TargetPro Canada 4.7 on the default instance of SQL Server.

2. Install TargetPro U.S. 4.7 Server as described in the TargetPro U.S. 4.7 Installation Guide.

During the Server installation, perform a Custom setup and install TargetPro U.S. 4.7 on a named instance.

Unless you already have a named instance on the SQL Server database ready to use for TargetPro, it is recommended you opt for TargetPro to create a named instance for you. This is called TPUSA.

3. Install both TargetPro Canada and U.S. 4.7 Clients.

Server Installation – New Users

Follow the instructions in this chapter if you are installing TargetPro Canada 4.7 for the first time and do not have earlier versions of TargetPro Canada on your computer. The TargetPro Canada installation is divided into four sections: Server Software, Server Data, Client Software, and Client Data. This chapter describes the Server Software and Data installation.

If you already have TargetPro Canada installed, refer to Upgrading Data on TargetPro Canada 4.7 in Chapter 5 on page 33.

In this section:

Installing the Server Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Installing the Server Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Installing the Latest TargetPro Service Pack. . . . . . . . . . . . . . . . .23Removing TargetPro Canada 4.7 Server Software . . . . . . . . . . . .24

3


Installing the Server SoftwareFollow the instructions in this section to install TargetPro Canada 4.7 Server Software for the first time. Read Chapter 2: Pre-Installation before installing TargetPro Canada Server. After installing the Server Software you must install the Server Data as outlined in Installing the Server Data on page 18.

For upgrade instructions refer to Upgrading Data on TargetPro Canada 4.7 in Chapter 5 on page 33.

Note If you plan to use an existing SQL Server instance with TargetPro Canada, please take note that the TargetPro Canada Server setup will have to stop and restart SQL Server occasionally.

To install TargetPro Canada 4.7 Server software:

1. Insert Server Software DVD into the media drive.

2. Run setup.exe.

Select Run from the Microsoft Start menu, then click Browse. Navigate to the media drive on your computer. Select setup.exe, click Open. Click OK to start the installation.

3. Start the installation process.

Click Next at the Welcome screen.

Compare your system information with that in Pre-Installation in Chapter 2 on page 9, and click Next.

Click Yes to accept the license.

4. Register the software for the appropriate users.

Enter the User Name and Company Name associated with this installation of TargetPro Canada. Select the type of users who will access this installation of TargetPro Canada. Click Next.

5. Choose a setup type.

This screen specifies which SQL Server to install.

• Typical and Compact – Installs TargetPro Canada Server Software and its common components on the default SQL Server instance.

• Custom – Allows you to install TargetPro Canada Server Software on a named instance; a different location then the default.

Most basic setups require a Typical installation. If you are an advanced user and want to install on a named instance, choose Custom. Click Next.


Install Guide 17

6. (Custom setups only) Select a named SQL Server instance.

If you chose Custom in step 5, TargetPro Canada prompts you to install on a named instance.

Server Data Installer: Install on a Default or Named SQL Server Instance?

Click Yes to install on the default instance, or No to install on a named instance.

Server Data Installer: Install on an Existing Named Instance?

Click Yes to install on an existing named instance, or No for TargetPro Canada to create a named instance called TPCANADA. If you want to install on an existing instance, select a named instance from the list and click Next.

Note All named instances must be local to the installation computer.

7. Choose the destination location for the program files.

By default TargetPro Canada installs the Server Software to C:\Program Files\MapInfo\TargetPro Canada Server\. Click Browse to choose a different folder to install TargetPro Canada Server Software. Click Next.

8. Start copying the files.

Review the settings, and use the Back button to revisit a dialog to change your selections. Click Next to start copying the files. There may be a short delay before you see progress.

Note You may be asked to confirm your SQL Server is configured according to the instructions given in Pre-Installation in Chapter 2 on page 9.

9. Follow any messages.

During installation you might see messages requiring action, depending on the type of system you have. Follow the instructions provided in the message and click OK.

Information Dialog: Close SQL Server Tools

Installing the Server Data


10. Configure Service Pack 3 (some setups).

You may be prompted to reboot and restart the installation to configure Service Pack 3 for Microsoft SQL Server. If this happens, click OK, then Finish. Restart your computer, then restart the server software installation as described in step 1; setup continues from where it left off.

Information Dialog: Reboot and Restart the installation

11. Restart your computer.

Remove any media from the drive. Select Yes to automatically restart your computer, or No to restart your computer later. You must restart your computer before installing the Server Data.

TargetPro Canada 4.7 Server Software is installed on your computer. You must now install the Server Data; refer to Installing the Server Data in the following section.

Installing the Server DataFollow the instructions in this section to install TargetPro Canada 4.7 Server Data for the first time.

This is the second part of the Server installation. You must install the Server Software before installing the data. If you have not done this, refer to Installing the Server Software on page 16.

Note You must install the data on the same computer as the software. It cannot be remote.

For upgrade instructions, refer to Upgrading Data on TargetPro Canada 4.7 in Chapter 5 on page 33.

To install the TargetPro Canada Server data:

1. Make sure that your SQL Server is running.

2. Place the Supporting Files CD in the media drive.

3. Run ServerDataInstaller.exe.

Select Run from the Microsoft Start menu, then click Browse. Navigate to the media drive on your computer. Select ServerDataInstaller.exe, and click Open. The path displays in the Run dialog box. Click OK to start the installation.

Note Run ServerDataInstaller.exe from the root location of the Supporting files CD. Do not run it from a subfolder or the data may not get installed properly.

4. Click Next at the Introduction dialog box.


Install Guide 19

5. Specify the location of the license file and SQL Server name.

The path to your license file on the Supporting Files CD is populated automatically by the installer. The license file has an .mdb extension, for example All_DBS_National.mdb.

Server Data Installer: Specify the SQL Server

Select a SQL Server to use with the Server Data you are installing. The most common setup is (local); the SQL Server is on the same computer as the Server Software.

If you installed the Server on a named instance in step 5 of Installing the Server Software on page 16, select that instance (for example, SERVER1\TPCANADA).

If your System Administrator has provided a user name and password, enter this information. Otherwise, select NT Authentication. Click Next.



6. Select data to install.

For a new installation, all data must be installed. Click Next.

Server Data Installer: Data Selection


Install Guide 21

7. Review the destination location for data files.

The installer automatically populates the textboxes with the path to the metadata patch file and report templates on the Supporting Files CD, and populates the Data Directory field with the default location of C:\Program Files\MapInfo\TargetPro Canada\Microsoft SQL Server\MSSQL\Data\.

Note In the future you may be sent a new metadata patch file or report template. In this case you would rerun the Server Data Installer from Start > Programs > MapInfo > TargetPro Canada > Server Data Installer (Canada), select the checkboxes and browse to the location of the new files on your computer.

Click Next to continue, or consider the following if you have limited hard disk space.

Server Data Installer: Metadata Patch File and Report Templates Location

(Optional) To install data to a different location, not to the default data directory location, then:

• Install all databases to the same location by changing the Data Directory path to a different location.

• Install databases to separate locations by selecting the Prompt for directory for each database radial button. You will be prompted, later in the install process, to select a location each time a database installs.

Refer to Pre-Installation Tasks in Chapter 2 on page 12 for information about disk space requirements.



8. Select the databases to install.

By default all licensed databases will be installed unless you indicate otherwise by clearing a database checkbox. It is recommended that you install all the databases listed.

Click Next.

Note The databases you see differ depending on the type of data you purchased.

Server Data Installer: Enable Database Installation

9. Click Install to start copying the Server Data.

10. When prompted, insert the correct media and click OK.

Server Data Installer: prompt for new media

If prompted, browse to the location of the media on the computer and click OK. Ensure that you browse to the root folder containing the data. This is a folder one level up from the Data folder, not the Data folder itself.


Install Guide 23

If you chose Prompt for directory for each database in step 7 of the Server Data installation, you will be prompted to select a location each time a database is installed.

11. Installation is complete.

Server Data Installer: Installation Complete

You now need to install a TargetPro Canada Client. Install a TargetPro Canada Client on the same computer, or on any other computer that has access to the TargetPro Canada Server and Data you have just installed.

Installing the Latest TargetPro Service PackIf you plan to install both TargetPro Canada Client and Server onto the same machine, then please wait to install the TargetPro Service Pack until after installing the Client. Refer to Client Installation – New Users in Chapter 4 on page 25 for Client installation instructions.

If you are not installing TargetPro Canada Client and Server onto the same machine, then apply the TargetPro Service Pack now to the Server installation. The latest Service Pack supplied with TargetPro Canada 4.7 contains necessary software patches and updates. Follow the Service Pack installation instructions provided on the TargetPro Service Pack media.

Removing TargetPro Canada 4.7 Server Software


Removing TargetPro Canada 4.7 Server SoftwareTo remove TargetPro Canada 4.7 Server software, do the following:

1. Launch the Control Panel.

On Windows 2000, choose Start > Settings > Control Panel.

On Windows XP, choose Start > Control Panel.

2. Double-click Add/Remove Programs. The Add/Remove Programs dialog displays.

3. Select TargetPro Canada 4.7 Server from the list and click Change/Remove.

Select Remove and click Next. Click OK to confirm.

Click Finish.

4. Repeat step 3 for the following components:

• MapInfo SpatialWare 4.8

• Microsoft SQL Server 2000 (if it was installed by TargetPro Canada 4.7)

5. Remove any files remaining in the directory where TargetPro Canada 4.7 Server was installed..

6. Restart the computer.

Client Installation – New Users

Follow the instructions in this chapter if you are installing TargetPro Canada 4.7 for the first time and do not have earlier versions of TargetPro Canada on your computer.

If you are upgrading TargetPro Canada 4.7 data, follow the instructions in Upgrading Data on TargetPro Canada 4.7 in Chapter 5 on page 33.

In this section:

Installing the Client Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Installing SQL Server Client Tools . . . . . . . . . . . . . . . . . . . . . . . . .27Installing Multiple Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Installing the Client Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Installing the Latest TargetPro Service Pack. . . . . . . . . . . . . . . . .31Removing TargetPro Canada 4.7 Client Software . . . . . . . . . . . . .31

4


Installing the Client SoftwareBefore you install the TargetPro Canada Client:

• Read the Pre-Installation Tasks in Chapter 2 on page 12. • Ensure TargetPro Canada Server has been installed on your network before starting the Client

Software installation. You must have a server installed to use the client.

To install the TargetPro Canada Client software:

1. Insert the Client Software CD into the media drive.

2. Run setup.exe.

Choose Run from the Microsoft Start menu, then click Browse. Navigate to the media drive on your computer. Select setup.exe, and click Open. The path displays in the Run dialog box (for example, F:\setup.exe, where F:\ is the media drive). Click OK to open the file.

3. Start the installation process.

Click Next at the Welcome dialog box.

Review your system information and check the System Requirements on page 10. Click Next.

Click Yes to accept the license agreement.

4. Register the software for the appropriate users.

Enter the user name and company name for this installation of TargetPro Canada. Enter the TargetPro Canada 4.7 serial number, which is found on the TargetPro Canada 4.7 product box or the Supporting Files CD. Select the type of users who will access this Client installation of TargetPro Canada. Click Next.

5. Choose a setup type.

• Typical and Compact – Install the TargetPro Canada Client Software and all of its components to C:\Program Files\MapInfo\TargetPro Canada\.

• Custom – Allows you to install the Client Software to a different location on your computer. The next screen prompts you to choose a new destination location. Click Browse to select a location for the TargetPro Canada Client.

Click Next.

6. Enter the SQL Server instance you want the Client to use

This is the name of the Server you want the Client to use. If TargetPro Canada setup finds a SQL Server for the Client to use, it populates the textbox with that Server name. If it finds a named instance it provides the Server and instance name in the following format: server_name\instance_name (for example, SERVER1\TPCANADA).

If setup cannot find an appropriate SQL Server, or finds the1 default SQL Server, it displays (local). Change this Server name if necessary.

This becomes the entry that appears by default when you start TargetPro Canada; it can be changed any time. Click Next.


Install Guide 27

7. Start copying the files.

Review your selections, and use the Back button to revisit a screen.

Click Next to start copying the files. This installs MapInfo Professional, sets up system files, and performs configuration operations. Follow any instructions provided during the rest of the installation.


Click Yes to restart your computer now, or No to restart your computer later. Remove any media from the drive before restarting the computer. Click Finish.

You must now install the Client Data on all computers where the Client Software has been installed. Refer to Installing the Client Data on page 28.

Installing SQL Server Client ToolsIf you are installing TargetPro Canada Client on a computer that does not have TargetPro Canada Server installed locally, you need to install the SQL Server Client Tools to use the Data Manager. To do this:

1. Insert Server Software DVD into the media drive.

2. Run ClientTools.BAT.

Choose Run from the Microsoft Start menu, then click Browse. Navigate to the media drive on the computer. Select ClientTools.BAT, click Open. Click OK to open the file.

A command window displays and then disappears when the script has run.

If during this procedure you see a warning message that 2003 SRV is not supported, click Ok in the message dialog and continue installing SQL Server Client Tools. Although you received this message, you will still be able to use your Data Manager.

Installing Multiple ClientsTo install multiple Clients to access a single TargetPro Canada Server:

1. Install TargetPro Canada Server software and data, as outlined in Installing the Server Software in Chapter 3 on page 16.

2. Install the TargetPro Canada Client Software, following the instructions provided in Installing the Client Software on page 26, on each computer you want to use with the TargetPro Canada Server you just installed.

Enter the name of the TargetPro Canada Server you installed in step 6 of the Client software installation.

3. Install SQL Server Client Tools following the instructions provided in Installing SQL Server Client Tools on page 27. Do this on each Client computer to successfully run the Data Manager.

Installing the Client Data


4. Install the Client data.

Install the Client data on each computer where the Client Software was installed. Refer to Installing the Client Data on page 28.

Installing the Client DataThese instructions describe installing TargetPro Canada 4.7 Client Data for the first time. You must first have the Client Software installed as described in Installing the Client Software on page 26.

You must install the data on the same computer as the software. It cannot be remote.

To install TargetPro Canada Client data:

1. Insert the Supporting Files CD into the media drive.

2. Run ClientDataInstaller.exe.

Choose Run from the Microsoft Start menu, then click Browse. Navigate to the media drive on your computer. Select ClientDataInstaller.exe, and click Open. The path displays in the Run dialog box. Click OK to start the installation.

Note Run ClientDataInstaller.exe from the root location of the Supporting files CD. Do not run it from a subfolder or the data may not get installed properly.

3. Click Next to the Data Installer’s Introduction screen.

4. Select the data to install.

For a new installation, all data MUST be installed. Click Next.

Client Data Installer: Data Selection


Install Guide 29

5. Specify the location of the license file and data.

The path to your license file on the Supporting Files CD is populated automatically by the installer. The license file has an .mdb extension, for example All_DBS_National.mdb.

Optionally install the Boundary and Geo Data to a different directory by changing the default locations. This is useful if you do not have enough disk space. The defaults are: C:\Program Files\MapInfo\TargetPro Canada\Data\Boundaries\C:\Program Files\MapInfo\TargetPro Canada\Data\CANGeodata63\

Click Next.

Client Data Installer: Specify the License File

6. Overwrite existing Boundary or Geodata (optional).

If in the previous step you browsed to another computer on the network for existing Boundary Data or Geodata, you are prompted with a message similar to the following:

Installing the Client Data


Client Data Installer: Overwrite Boundary Files

Choose to use the data currently on that computer if you are sure it is complete, or choose to overwrite it with the new data.

7. Click Install to start upgrading the Client Data.

When prompted, insert the correct media and click OK.

Client Data Installer: prompt for new media


Client Data Installer Upgrade: Browse for Folder


Install Guide 31


Client Data Installer: Installation Complete!

Installing the Latest TargetPro Service PackThe latest Service Pack is supplied with TargetPro Canada 4.7. The Service Pack contains necessary software patches and updates. After installing TargetPro Canada 4.7, apply the TargetPro Service Pack to all Server and Client software installations. Follow the Service Pack installation instructions provided on the TargetPro 4.7 Service Pack media.

Removing TargetPro Canada 4.7 Client SoftwareTo remove TargetPro Canada 4.7 Client software, do the following:

1. Launch the Control Panel.

On Windows 2000, choose Start > Settings > Control Panel.

2. Double-click Add/Remove Programs. The Add/Remove Programs dialog displays.

3. Select TargetPro Canada 4.7 and click Change/Remove. The Installation Wizard displays.

Select Remove and click Next. Click OK to confirm.

Click Finish.

4. Remove MapInfo Professional 7.8 (if it was installed by TargetPro Canada 4.7).

5. Remove any files or folders remaining in the directory where TargetPro Canada 4.7 was installed. By default this is C:\Program Files\MapInfo\TargetPro Canada\.


Removing TargetPro Canada 4.7 Client Software


5Upgrading Data on TargetPro Canada 4.7

This chapter provides instructions on how to upgrade your installation of TargetPro Canada 4.7 with updated data.

You must upgrade all Client and Server data before using TargetPro Canada to ensure expected results from your analysis.

In this section:

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Upgrading the Server Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Upgrading the Client Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40Installing the Latest TargetPro Service Pack. . . . . . . . . . . . . . . . .43

Upgrading the Server Data


OverviewThese instructions describe upgrading TargetPro Canada 4.7 with the latest data. As you already have TargetPro Canada 4.7 software installed, then you only need to upgrade the data.

To upgrade to TargetPro Canada 4.7, refer to the following sections:

1. Upgrading the Server Data on page 34.

2. Upgrading the Client Data on page 40.

Upgrade the Server Data first, then the Client Data.

Keeping the Existing Workspace

The Client Data upgrade automatically overwrites the previous year’s TargetPro Canada 4.7 workspace with the current year’s workspace.

To continue using your previous year’s workspace, do the following:

1. Find the previous year’s TargetPro Canada 4.7 workspace (for example, 2008).

Navigate to the workspace folder in the Client installation. Typically this is C:\Program Files\MapInfo\TargetPro Canada\Data\Workspace. The workspace is called default.WOR.

2. Rename the old workspace to default_47[Previous Year].WOR.

3. Upgrade the data following the instructions in this chapter.

This automatically installs the new workspace file: default.WOR.

4. Make the previous year’s workspace the default workspace.

a. Rename default.WOR to default_47[Current Year].WOR.

b. Rename default_47[Previous Year].WOR to default.WOR.

Upgrading the Server DataThis section describes how to update the Server data.

1. Make sure that your SQL Server is running.


3. Run ServerDataInstaller.exe.

Select Run from the Microsoft Start menu, then click Browse. Navigate to the media drive on your computer. Select ServerDataInstaller.exe, and click Open. The path displays in the Run dialog box. Click OK to start the installation.

Note Run ServerDataInstaller.exe from the root location of the Supporting files CD. Do not run it from a subfolder or the data may not get installed properly.

4. In the Introduciton screen, click Next.


Install Guide 35

5. In the License File and SQL Server Selection screen:

The Server Data installer populates the license file text box with the path to the license file on the Supporting Files CD.

Select a SQL Server to use for the Server Data you are installing.

• If you initially installed TargetPro Canada 4.7 Server using the Typical option, select (local).

• If you initially installed TargetPro Canada 4.7 Server on a named instance of SQL Server, such as TPCANADA, select that named instance of SQL Server. For example SERVER1\TPCANADA.

If your System Administrator has provided a user name and password, enter this information. Otherwise, check NT Authentication.

Click Next.

Server Data Installer Upgrade: Specify the SQL Server



6. In the Data Selection screen, select data to upgrade. For this upgrade, all data types must be installed.

Click Next.

Server Data Installer Upgrade: Data Selection


Install Guide 37

7. In the Choose Destination Locations screen, the Server Data Installer automatically populates the textboxes with the path to the metadata patch file and report templates on the Supporting Files CD, and populates the Data Directory field with the default location of C:\Program Files\MapInfo\TargetPro Canada\Microsoft SQL Server\MSSQL\Data\.

(Optional) To install data to a different location, not to the default data directory location, then:

• Install all databases to the same location by changing the Data Directory path to a different location.

• Install databases to separate locations by selecting the Prompt for directory for each database radial button. You will be prompted, later in the install process, to select a location each time a database installs.

Click Next.

Server Data Installer Upgrade: Metadata Patch File and Report Templates

Note In the future you may be sent a new metadata patch file or report template. In this case you would rerun the Server Data Installer from Start > Programs > MapInfo > TargetPro Canada > Server Data Installer (Canada), select the checkboxes and browse to the location of the new files.



8. In the Choose Destination Locations screen, select the databases to update.

By default all licensed databases are updated unless you indicate otherwise by clearing a database checkbox. It is recommended you update all the databases listed.

Click Next.

Note The databases you see differ depending on the type of data you purchased.

Server Data Installer Upgrade: Enable Database Installation

9. In the final screen, click Install to start upgrading the Server Data.


Server Data Installer Upgrade: prompt for new media


Install Guide 39


Server Data Installer Upgrade: Browse for Folder

Note If you chose “Prompt for directory for each database” in step 7 of the Server Data installation, you will be prompted to select a location each time a database is installed.

11. When prompted, reinstall databases.

You may be prompted to reinstall some databases that already exist in the older data. Click Yes to delete all the old databases and replace them with the new ones.


Server Data Installer: Installation Complete!

Now continue to Upgrading the Client Data on page 40 for all the TargetPro Canada 4.7 Clients.

Upgrading the Client Data


Upgrading the Client DataThis section describes how to update the Client data with the new Client Boundary Files, Drive Time, GeoData, and Default Workspace.


2. Run ClientDataInstaller.exe.

Select Run from the Microsoft Start menu, then click Browse. Navigate to the media drive on your computer. Select ClientDataInstaller.exe, and click Open. The path displays in the Run dialog box. Click OK to start the installation.

Note Run ClientDataInstaller.exe from the root location of the Supporting files CD. Do not run it from a subfolder or the data may not get installed properly.

3. In the Introduction screen, click Next.

4. In the Data Selection screen, select data to upgrade. For this upgrade, all data types must be installed.

Click Next.

Client Data Installation Upgrade: Data Selection


Install Guide 41

5. In the Choose Destination Locations screen, the Client Data Installer automatically populates the License File field with the path to the file on the Supporting Files CD. Click Next.

6. When prompted, update existing copies of data.

If TargetPro Canada finds an existing copy of Boundary or GeoData data, you are given an option to use the existing files or to overwrite them. It is recommended you overwrite the existing data. Click Ok after making your choice. Clicking Cancel returns you to the previous dialog.

Client Data Installer Upgrade: Overwrite Existing Boundary Data?

Upgrading the Client Data


Client Data Installer Upgrade: Overwrite Existing Geocoding Data?

7. In the final screen, click Install to start upgrading the Client Data.


Client Data Installer Upgrade: prompt for new media


Client Data Installer Upgrade: Browse for Folder


Install Guide 43


Client Data Installer Upgrade: Installation Complete!

Installing the Latest TargetPro Service PackTargetPro Service Packs contain necessary software patches and updates. A TargetPro Service Pack may be shipped seperately from the TargetPro software and data releases. This is because TargetPro Service Packs are created and shipped as necessary.

If you receive a TargetPro Service Pack, follow the Service Pack installation instructions provided on the Service Pack media to apply the TargetPro Service Pack to all Server and Client software installations.

Installing the Latest TargetPro Service Pack


Geography Levels Available in TargetPro

In this section:

KEY Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46Geographic Level Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . .46

A

Geographic Level Descriptions


KEY DefinitionsThe following lists the geographic levels that are available in TargetPro and their associated KEY definitions.


Canadian Geographic Levels

Geography Layer Width Sample Key Sample Label

Canada 3 CAN Canada

Provinces 2 35 Ontario

Census Divisions 4 3512 Hastings County, ON

Census Subdivisions 7 3512026 Centre Hastings (TP), ON

Census Tracts 10 5350157.00 5350157.00

Dissemination Areas 8 35120226 35120226

Census Metropolitan Areas 3 537 Hamilton

Federal Electoral Districts 5 35031 Hamilton Centre / Hamilton-Centre

Forward Sortation Areas 3 L0S L0S: HAMILTON

Postcodes (FSA LDUs) 6 L0S1R0 L0S1R0

Canada A boundary that represents the entire nation.

Province The set of boundaries that represent the 12 Provinces in Canada plus the Northwest Territories.

Census Division (CD) The census division boundary file is a geographic polygon file representing the graphical boundaries for Canada's 288 census divisions.

Census divisions (CDs) are geographic areas between the province level and census subdivisions. Where provincial law does not designate census divisions, Statistics Canada in cooperation with those provinces has created CDs for statistical purposes. Census divisions represent areas such as counties, regional districts, regional municipalities and united counties.

Appendix A: Geography Levels Available in TargetPro

Install Guide 47

Census Subdivision (CSD) The census subdivision boundary file is a geographic polygon file representing the graphical boundaries for Canada's 5,600 census subdivisions.

Census subdivisions (CSDs) comprise the political municipal boundaries (such as cities, towns, villages, townships, and Indian Reserves) within provincial census divisions.

Census Metropolitan Area (CMA)

The census metropolitan area and census agglomeration boundary file is a geographic polygon file representing the graphical boundaries for Canada's 27 census metropolitan areas and 113 census agglomeration areas.

Census metropolitan areas (CMAs) are very large urban areas with populations over 100,000 (in the previous census). Census subdivisions (municipalities) that make up a CMA must have a high degree of economic and social integration with the "urbanized core". Similarly, Census agglomerations (CAs) are smaller areas with urbanized cores over 10,000 but less than 100,000 in population (in the previous census). Both CMA and CA geographic areas are not political; they are defined by Statistics Canada.

Census Tract (CT) Census tracts (CTs) are small urban or rural neighborhood-like communities in Canada's census metropolitan areas and census agglomerations, having an urban core population of 50,000 or more in the previous census. The population in a CT ranges from 2,500 to 8,000, averaging 4,000 in size, except for census tracts in business districts. When census tracts are first delineated Statistics Canada makes every effort to ensure that the social/economic status of census tract populations are as homogeneous as possible.

Forward Sortation Area (FSA)

The first three characters of the postal code identify the forward sortation area (FSA). Individual FSAs are associated with a postal facility from which mail delivery originates. The average number of households served by an FSA is approximately 7,000, but the number can range from zero to more than 50,000 households. This wide range of households occurs because some FSAs contain only businesses (zero households) and some FSAs serve very large geographic areas. Rural FSAs are identified by the presence of a zero in the second position of the FSA code. As of May 2001, there were approximately 1,600 FSAs in Canada.1



1 Statistics Canada, 2001 Census Dictionary

Dissemination Area (DA) The dissemination area (DA) boundary file is a geographic polygon file representing the graphical boundaries for Canada's 53,000 dissemination areas.

A dissemination area is a small area composed of one or more neighbouring blocks with a target population of 400-700 persons. The DA boundaries follow the road features creating the block while also respecting the boundaries of all census subdivisions and census tracts. Occasionally, a high-rise apartment building will form its own DA (if its population meets or exceeds 300).

Forward Sortation Area Local Delivery Unit (FSA LDU)

A Canadian postal code is a string of six characters that form part of a postal address in Canada. Like British postcodes, Canada's postal codes are alphanumeric. Most other postal and ZIP code systems use only numbers. Canadian postal codes are in the format of ANA NAN, where A is a letter of the alphabet, and N is a digit, with a required space separating the third and fourth characters. An example is K1A 0B1, which is for Canada Post's Ottawa headquarters. The FSA LDU is represented as a point location.

See also Forward Sortation Area (FSA).

Federal Electoral District (FED)

The federal electoral district boundary file is a geographic polygon file representing the graphical boundaries for Canada's 308 federal electoral districts.

Based on the 2003 Representation Order, each of these geographic areas/ridings return one member to serve in the House of Commons.

Appendix A: Geography Levels Available in TargetPro

Install Guide 49

Install Guide 49

Index

BBrowse for Folder dialog 23, 30, 39, 42

CCanada, definition 46Census Division (CD), definition 46Census Metropolitan Area (CMA), definition 47Census Subdivision (CSD), definition 47Census Tract (CT), definition 47Choose Destination Locations screen 21, 29, 37Client

data installation, new users 28data upgrade 40–43data, installation components 12removing 31software installation, new users 26–27software, installation components 11–12space requirements 10–11

Components, preinstallation 11–12

DData Selection screen 20, 22, 28, 36, 38, 40Dissemination Area (DA), definition 48

FFederal Electoral District (FED), definition 48Forward Sortation Area (FSA), definition 47Forward Sortation Area Local Delivery Unit (FSALDU), definition 48

GGeograhic Layers available 46Geographic Level Descriptions 46

IInstallation

Canada and U.S. 14client data, new users 28

client software, new users 26–27components, client data 12components, client software 11–12components, server data 11components, server software 11multiple clients 27–28server data, new users 18–23server software, new users 16–18

Inventory, product 6–7

LLicense File and SQL Server Selection screen 19, 35

Mmessage prompt

Client Data installer found a copy of Boundary Datafiles 30, 41

Client Data installer found a copy of GeoData files42

close SQL Server tools 17install on a default or named SQL Server instance 17install on existing named instance 17reboot and restart the installation 18

Multiple clients, installation 27–28

NNT Authentication

Server data, upgrading 35Server installation, new 19

PPreinstallation

components 11–12system requirements 10–11tasks 12–14

Productdocumentation 7–8inventory 6–7

Province, definition 46

Index


RRegional and Language Options dialog 13Removal

client, software and data 31server, software and data 24

Requirementsdisk space 10–11preinstallation 12–14

SServer

data installation components 11data installation, new users 18–23data upgrade 34–39removing 24software installation, new users 16–18software, installation components 11

Server data installerlicense file 21, 37SQL Server 19, 35

SQL Server authentication 11

TTasks, preinstallation 12–14

UUpgrading

client data 40–43server data 34–39

WWindows authentication 11Workspace, keeping existing 34

targetpro 4.7 canada install guide - pitney...

Documents