tariff description description ===== item 50 applies unless otherwise stated

Tariff Description

===========================================================================

Item 50 applies unless otherwise stated.

4002.11.00 STYRENE-BUTADIENE DISPERSIONS, high solids, cold polymerised,

anionic

Op. 20.02.1996 Dec. 24.05.1996 - TC 9603295

4002.11.00 STYRENE BUTADIENE POLYMER DISPERSIONS, cationic, with a solids

content exceeding 60%

Op. 06.03.1998 Dec. 05.06.1998 - TC 9802012

4002.19 COUNTER OR TOE PUFF STIFFENER MATERIAL, footwear, thermoplastic

Op. 01.01.1988 Dec. 18.02.1988 - TC 8735694

4002.19 THERMOPLASTIC SYNTHETIC RUBBER, being a block copolymer of

styrene-butadiene-styrene, having a styrene component of NOT less

than 36% by mass

Op. 01.01.1988 Dec. 17.04.1991 - TC 9101870

4002.19 THERMOPLASTIC SYNTHETIC RUBBERS IN NATURAL FORM, being styrene-

butadiene-styrene block copolymers containing between 10% and

35% bound styrene but NOT containing pigments, colourants or

mineral fillers

Op. 30.04.1990 Dec. 23.07.1993 - TC 9304245

4002.19.00 THERMOPLASTIC SYNTHETIC RUBBER, being styrene-butadiene-styrene

block copolymers containing between 10% and 35% styrene by mass

Op. 29.04.1994 Dec. 05.08.1994 - TC 9404449

4002.19.00 THERMOPLASTIC SYNTHETIC RUBBER, being a block copolymer of styrene -

butadiene-styrene, having a styrene component NOT less than 20% by

mass

Op. 02.05.1994 Dec. 05.08.1994 - TC 9404489

4002.19.00 STYRENE-BUTADIENE RUBBER

Op. 21.12.2000 Dec. 09.03.2001 - TC 0010301

4002.20.00 RUBBER, POLYBUTADIENE, having ALL of the following:

(a) cis content NOT less than 97%;

(b) Mooney Viscosity 43 ML(1+4) 100 degrees

Celsius OR 64 ML(1+4) 100 degrees Celsius;

(c) stabilisers

For the purposes of this Order, tolerances of + OR - 5% are

allowable for specifications in (b)

Op. 19.06.2006 Dec. 15.09.2006 - TC 0610528

4002.20.00 RUBBER, POLYBUTADIENE having BOTH of the following:

(a) mooney viscosity (ML1+4 @ 100 degrees celsius) NOT less

than 20;

(b) cis content NOT less than 30%

Op. 27.06.2006 Dec. 22.09.2006 - TC 0610950

4002.31 ISOBUTENE-ISOPRENE (BUTYL) SYNTHETIC RUBBER (IIR)

Op. 10.08.1987 Dec. 17.11.1987 - TC 8734277

4002.39 HALO-ISOBUTENE-ISOPRENE SYNTHETIC RUBBER (CIIR OR BIIR)

Op. 10.08.1987 Dec. 17.11.1987 - TC 8734276

4002.41 LATEX CHLOROPRENE (CHLOROBUTADIENE) SYNTHETIC RUBBER (CR)

Op. 10.08.1987 Dec. 17.11.1987 - TC 8734280

4002.49 CHLOROPRENE (CHLOROBUTADIENE) SYNTHETIC RUBBER (CR)

Op. 11.09.1987 Dec. 23.11.1987 - TC 8734629

4002.59 ACRYLONITRILE-BUTADIENE SYNTHETIC RUBBER (NBR)

Op. 11.09.1987 Dec. 23.11.1987 - TC 8734633

Tariff Description

===========================================================================


4002.70 ETHYLENE-PROPYLENE NON-CONJUGATED DIENE SYNTHETIC RUBBER (EPDM)

Op. 11.09.1987 Dec. 17.11.1987 - TC 8734634

4002.91 STYRENE BUTADIENE VINYL-PYRIDINE TERPOLYMER in latex form

Op. 27.05.1985 Dec. 13.09.1985 - TC 8532139

4002.99 EPICHLORHYDRIN SYNTHETIC RUBBER (CO/ECO)

Op. 27.11.1987 Dec. 18.02.1988 - TC 8735603

4002.99 THIOL TERMINATED LIQUID POLYSULPHIDE POLYMERS

Op. 24.05.1988 Dec. 28.04.1989 - TC 8804982

4002.99 STYRENE-ETHYLENE-PROPYLENE BLOCK COPOLYMER SYNTHETIC RUBBER

Op. 12.10.1988 Dec. 09.12.1988 - TC 8809081

4002.99 THERMOPLASTIC SYNTHETIC RUBBER, being a block copolymer of

styrene-isoprene-styrene

Op. 01.01.1988 Dec. 17.04.1991 - TC 9101891

4002.99.00 THERMOPLASTIC SYNTHETIC RUBBER, being styrene-ethylene-butylene-

styrene (SEBS)

Op. 01.07.1996 Dec. 14.06.1996 - TC 9602731

4002.99.00 POLYMER BLEND, ACRYLONITRILE BUTADIENE RUBBER AND PVC

Op. 07.04.2000 Dec. 11.08.2000 - TC 0003545

4003.00 RUBBER, reclaimed

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340152

4005.10.00 SHEETS, COMPOUNDED RUBBER, having a composition of ALL of the

following:

(a) calcium carbonate;

(b) chlorinated paraffin oil;

(c) polyvinyl chloride (PVC) resin;

(d) carbon black

Op. 13.09.2011 Dec. 06.12.2011 - TC 1131383

4005.10.00 STRIPS, COMPOUND RUBBER, having BOTH of the following:

(a) natural rubber;

(b) carbon black

Op. 19.10.2009 Dec. 08.01.2010 - TC 0939310

4005.91.00 SHEETS, styrene butadiene rubber (SBR), compounded, unvulcanised

Op. 23.02.2007 Dec. 18.05.2007 - TC 0702861

4005.91.00 RUBBER, compounded, unvulcanised, natural AND/OR synthetic

Op. 26.04.2007 Dec. 06.07.2007 - TC 0706105

4005.99.00 SHEETING, styrene butadiene rubber (SBR), compounded,

unvulcanised

Op. 23.02.2007 Dec. 18.05.2007 - TC 0702860

4005.99.00 RUBBER, compounded, unvulcanised, natural AND/OR synthetic

Op. 26.04.2007 Dec. 06.07.2007 - TC 0706104

4006.90.00 TAPE, being woven textile strips coated BOTH sides in a rubber

based pressure sensitive adhesive

Op. 22.04.1994 Dec. 05.10.1994 - TC 9404333

4007.00 THREAD, rubber, extruded, adhered together during manufacture to

form a ribbon, each thread having a cross-sectional dimension NOT

exceeding 5 sq mm

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340160

Tariff Description

===========================================================================


4007.00 THREAD, rubber, round, extruded, uncovered

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340161

4008.11 BLANKETS, printers", in the length (but NOT including engravers"

or stereo blankets)

Op. 18.01.1985 Dec. 18.01.1985 - TC 8530228

4008.11 TAPES, electrical insulating, having ALL of the following:

(a) adhesive backing;

(b) comprised of synthetic rubber reinforced with

thermoplastic polymers;

(c) rated for continuous operation at 90 degrees C or higher

Op. 02.12.1987 Dec. 24.02.1988 - TC 8735643

4008.11 NEOPRENE SPONGE SHEETING, having ALL of the following:

(a) thickness NOT greater than 10 mm;

(b) tensile strength NOT less than 1.00 MPa;

(c) elongation capability of NOT less than 400%

Op. 24.05.1988 Dec. 21.10.1988 - TC 8805765

4008.11.00 FOAM UNDERWRAPS

Op. 23.11.2005 Dec. 13.02.2006 - TC 0516520

4008.11.00 SLABS, synthetic rubber, expanded closed cell, in sheets

Op. 11.12.2006 Dec. 09.03.2007 - TC 0619539

4008.11.00 FLOORING AND/OR UNDERLAY, ATHLETICS AND SPORTS

Op. 15.10.2008 Dec. 14.01.2009 - TC 0835681

4008.11.00 SHEETS, LATEX FOAM

Op. 10.11.2008 Dec. 30.01.2009 - TC 0839208

4008.11.00 SOLING MATERIAL, footwear, cellular rubber in sheet form, in ANY of

the following surfaces:

(a) high gloss, plain;

(b) high gloss, printed or patterned;

(c) lacquered surface, plain;

(d) lacquered surface, printed or patterned;

(e) non-finished, plain;

(f) non-finished, printed or patterned

Op. 01.07.1996 Dec. 12.06.1996 - TC 9605964

4008.11.00 NEOPRENE SPONGE RUBBER SHEETING, having BOTH of the following:

(a) thickness NOT greater than 10 mm;

(b) tensile strength NOT less than 1.00 MPa

Op. 01.07.1996 Dec. 14.06.1996 - TC 9605967

4008.19.00 PADS, PROTECTIVE, neoprene, adhesive backed

Op. 24.11.2009 Dec. 05.02.2010 - TC 0944772

4008.21 RUBBER DENTAL DAMS

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340164

4008.21 PADS, press, comprising heat resistant synthetic rubber laminated

with cloth

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340194

4008.21 RUBBER, table tennis bat, branded, in sheets, in ANY of the

following categories:

(a) pimples out;

(b) soft (a "pimples out" quality with sponge beneath the

surface);

(c) backside or reverse (pimples turned inwards against the

Tariff Description

===========================================================================


sponge)

Op. 15.05.1985 Dec. 15.05.1985 - TC 8531210

4008.21 BLANKETS, printers", in the length (but NOT including engravers"

or stereo blankets)

Op. 01.01.1988 Dec. 01.01.1988 - TC 8632221

4008.21 STRIP, being vulcanised nitrile rubber and styrene butadiene

rubber in combination, with multiple uniform layers of fabric

reinforcing exposed on 2 faces with uniform colour and texture,

depth NOT exceeding 20 mm and width NOT exceeding 15 mm

Op. 30.01.1986 Dec. 05.05.1986 - TC 8632322

4008.21 SEALANTS, unhardened vulcanised synthetic rubber, having a

swelling ratio in aqueous solution of 1:1 or greater but NOT

exceeding 1:10, capable of returning to its original dimension

upon drying

Op. 24.04.1992 Dec. 22.06.1992 - TC 9203505

4008.21.90 ROLLS, RUBBER SHEET, incorporating indented patterns on one side

Op. 18.05.2015 Dec. 26.08.2015 - TC 1518858

4008.21.90 TAPE, double sided, isoprene isobutylene rubber

Op. 02.05.2011 Dec. 25.07.2011 - TC 1113892

4008.21.90 RUBBER, POLYCHLOROPRENE, compounded, vulcanised

Op. 28.12.2006 Dec. 23.03.2007 - TC 0620295

4008.21.90 SHEETING, rubber blends, fabric reinforced, single AND/OR 2 ply

Op. 23.02.2007 Dec. 18.05.2007 - TC 0702856

4008.21.90 RUBBER, vulcanised, natural AND/OR synthetic

Op. 26.04.2007 Dec. 06.07.2007 - TC 0706106

4008.21.90 RUBBER STRIP, NOT exceeding 1mm in thickness or 50mm in width

Op. 27.10.1994 Dec. 30.01.1995 - TC 9408559

4008.21.90 RUBBER, recycled, in rolls having ALL of the following:

(a) length 25m OR greater;

(b) width 1200mm OR greater;

(c) thickness 4mm OR greater

Op. 28.10.1994 Dec. 30.01.1995 - TC 9408569

4008.21.90 SOLING MATERIAL, footwear, solid resin rubber in sheet form, in ANY

of the following surfaces:

(a) high gloss, plain;

(b) high gloss, printed or patterned;

(c) lacquered surface, plain;

(d) lacquered surface, printed or patterned;

(e) non-finished, plain;

(f) non-finished, printed or patterned

Op. 01.12.1994 Dec. 17.03.1995 - TC 9409498

4008.21.90 STYRENE BUTIEDENE RUBBER (SBR), vulcanised, single layered OR

multi-layered, in rolls

Op. 29.11.2001 Dec. 01.03.2002 - TC 0110775

4008.29 SEALANTS, unhardened vulcanised synthetic rubber, having a swelling

ratio in aqueous solution of 1:1 or greater but NOT exceeding 1:10,

capable of returning to its original dimension upon drying

Op. 17.07.1992 Dec. 07.12.1992 - TC 9206710

4008.29.00 RUBBER, POLYCHLOROPRENE, compounded, vulcanised

Tariff Description

===========================================================================


Op. 28.12.2006 Dec. 23.03.2007 - TC 0620219

4008.29.00 SHEETING, rubber blends, fabric reinforced, single AND/OR 2 ply,

on rolls

Op. 23.02.2007 Dec. 18.05.2007 - TC 0702862

4008.29.00 RUBBER, vulcanised, natural AND/OR synthetic

Op. 26.04.2007 Dec. 06.07.2007 - TC 0706107

4009.11.90 SLEEVES, ethylene propylene diene monomer rubber, expanded around

a spiral welded polypropylene core

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105445

4009.11.90 TUBING, HEAT SHRINKABLE, being ANY of the following:

(a) elastomeric;

(b) fluoro elastomeric

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105446

4009.11.90 TUBING, natural rubber latex, manufactured by the dipped latex

method, having ALL of the following:

(a) elongation at break NOT less than 750%;

(b) tensile strength NOT less than 24 MPa at elongation of

750%;

(c) OD of 9 mm or greater but NOT exceeding 20 mm;

(d) ID of 2.5 mm or greater but NOT exceeding 7.0 mm

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105447

4009.21.90 HOSE, HYDRAULIC, reinforced, including ALL of the following:

(a) 2 wire steel braid;

(b) working pressure NOT less than 15 MPa and NOT

greater than 41 MPa;

(c) minimum bend radius NOT less than 45 mm and NOT greater

than 160 mm;

(d) inner diameter of NOT less than 6 mm and NOT greater than

26 mm;

(e) outer diameter of NOT less than 13 mm and NOT greater than

39 mm

Op. 13.04.2016 Dec. 11.07.2016 - TC 1613697

4009.21.90 HOSE, HYDRAULIC OIL LINE, multi-spiral OR braided, whether

OR not wire reinforced

Op. 11.12.2013 Dec. 31.03.2014 - TC 1340987

4009.21.90 HOSES, HYDRAULIC, spiral wire reinforced, complying with

Australian Standard 2660-1991 (AS 2660-1991) AND/OR United

States Department of Labor Mine Safety and Health Administration

(MSHA) Interim Fire Criteria for Accepted Hydraulic Hose

Op. 02.11.2006 Dec. 19.01.2007 - TC 0618152

4009.21.90 HOSES, WATERBLAST, spiral wire reinforced, having ALL of the

following:

(a) working pressure capacity NOT less than 74 MPa;

(b) burst pressure NOT less 187 MPa

Op. 02.11.2006 Dec. 19.01.2007 - TC 0618153

4009.21.90 HOSE, hydraulic, synthetic rubber, six spiral wire reinforced, with

an operating temperature range of - 40 degrees C to + 121 degrees C,

having an operating pressure of 41.4 MPa and a minimum burst

pressure of 165.5 MPa, having an ID of 25.4 mm OR 31.75 mm

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105432

4009.21.90 HOSE, hydraulic, ID 31.75 mm or greater, to ANY of the following

Specifications:

Tariff Description

===========================================================================


(a) SAE J517 100R1A;

(b) SAE J517 100R2A;

(c) SAE J517 100R1AT;

(d) SAE J517 100R2AT;

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105434

4009.21.90 HOSE, hydraulic, multi-spiral wire reinforced, having a temperature

range of - 40 degrees C to + 100 degrees C, with peaks up to 125

degrees C, minimum burst pressure of 139 MPa, having ALL the

following characteristics listed in THE TABLE:

THE TABLE

OD ID

(a) 49.4 mm 31.8 mm;

(b) 57.3 mm 38.1 mm;

(c) 71.5 mm 50.8 mm

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105435

4009.21.90 HOSE, hydraulic, multi-spiral, to specification DIN 20023 - 4 SH

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105436

4009.21.90 HOSE, hydraulic, multi-spiral, conforming to SAE J517 100R12

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105443

4009.21.90 HOSE HYDRAULIC REINFORCED, with four or six spirals of high tensile

steel wire conforming to SAE 100 R13 specifications

Op. 01.01.2002 Dec. 07.01.2002 - TC 0107611

4009.21.90 HOSE, hydraulic, capable of operating in temperatures of -40 degrees

C to +100 degrees C (both inclusive) specifications SAE 100R9

type AT

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107612

4009.21.90 HOSE, hydraulic, multi-spiral, to specification DIN 20023 4SP

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107613

4009.22.90 HOSES, HYDRAULIC, EARTHMOVER, steel wire reinforced

Op. 10.06.2010 Dec. 06.09.2010 - TC 1026178

4009.22.90 HOSES, RUBBER, STEEL WIRE REINFORCED, having ALL of the

following:

(a) diameter NOT less than 95 mm and NOT greater than 105 mm;

(b) pressure rating greater than 450 kPa

Op. 16.03.2006 Dec. 02.06.2006 - TC 0605447

4009.31.10 HOSE, hydraulic brake (but NOT including hose imported with

fittings attached), having ALL of the following specifications:

(a) ID 3.1 mm to 3.4 mm (both inclusive);

(b) SAE J1401;

(c) hot impulse test of 150 cycles, each cycle consisting of

1 min at 11 MPa followed by 1 min at 0 MPa;

(d) fluid and ambient temperature range between 140 degrees C

and 150 degrees C (both inclusive);

(e) having a maximum expansion of 0.28 mL/0.305 m under load of

7.0 MPa (70 kg/sq cm) and 0.35 mL/0.305 m under load of

10.5 MPa (105 kg/sq cm)

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105769

4009.31.90 WELDING HOSES, having ALL of the following:

(a) rubber inner layer;

(b) textile inner layer;

(c) rubber outer layer

Op. 19.01.2011 Dec. 18.04.2011 - TC 1102990

4009.31.90 HOSE, RUBBER, reinforced with synthetic textile material

Tariff Description

===========================================================================


Op. 29.11.2006 Dec. 02.03.2007 - TC 0619085

4009.31.90 HOSES, ABRASIVE FLUID CONVEYING

Op. 28.02.2007 Dec. 18.05.2007 - TC 0702645

4009.31.90 RUBBER HOSE, peristaltic, textile reinforced having ALL of the

following:

(a) maximum discharge pressure 16 bars;

(b) maximum line pressure 48 bars;

(c) outer surface having spiral wound synthetic abrasion resistant

finish, NOT further worked;

(d) operating temperature from -20 degrees C to 120 degrees C;

(e) natural and nitrile butyl rubber hoses having a shore hardness

of 53 +/- 5 shore;

(f) ethylene propylene rubber (EPDM) hose having a shore hardness

of 66 +/- 5 shore;

(g) internal and external diameter as follows:

(i) 10 +/- 0.5 mm and 32 +/- 0.7 mm;

(ii) 15 +/- 0.5 mm and 37 +/- 0.7 mm;

(iii) 25 +/- 0.5 mm and 55 +/- 0.7 mm;

(iv) 32 +/- 0.5 mm and 62 +/- 0.7 mm;

(v) 40 +/- 0.5 mm and 67 +/- 0.7 mm;

(vi) 50 +/- 0.5 mm and 81 +/- 1.2 mm;

(vii) 65 +/- 0.5 mm and 101 +/- 1.2 mm;

(viii) 80 +/- 0.5 mm and 123 +/- 1.2 mm;

(ix) 100 +/- 0.5 mm and 144 +/- 1.2 mm;

(x) 125 +/- 0.5 mm and 170 +/- 1.2 mm

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107346

4009.31.90 RUBBER HOSE, peristaltic, reinforced with braided nylon, having

ALL of the following:

(a) maximum working discharge pressure of 15 bars;

(b) maximum line pressure of 15 bars;

(c) maximum vacuum capability without deformation 5 kPa.a;

(d) hose static burst pressure range of 45 bar to 125 bar, both

inclusive;

(e) outer surface machined to a tolerance of 0.25 mm, completely

smooth with no spiral wound synthetic tape used;

(f) operating temperature of -20 degrees C to 85 degrees C;

(g) (i) natural, (NR), buna nitrile rubber, (NBR), or high buna

nitrile, (NBRX) body having a shore hardness of

57 + or - 4 shore; OR

(ii) ethylene propylene rubber, (EPDM) body having a shore

hardness of 59 + or - 4 shore; OR

(iii) hypalon rubber (HPN) body having shore hardness of

59 + or - 4 shore;

(h) hose internal diameters, wall thicknesses and lengths

respectively as follows;

(i) 10.5 mm (+ or - 0.5 mm), 10.5 mm (+ or - 0.2 mm) and

510 mm (+ or - 5 mm);

(ii) 15.5 mm (+ or - 0.5 mm), 10.5 mm (+ or - 0.2 mm) and

755 mm (+ or - 5 mm);

(iii) 26 mm (+ or - 1.0 mm), 14.1 mm (+ or - 0.2 mm) and

1005 mm (+ or - 10 mm);

(iv) 33.1 mm ( + or - 1.0 mm), 14.5 mm (+ or - 0.2 mm) and

1252 mm (+ or - 10 mm);

(v) 41 mm (+ or - 1.0 mm), 13.2 mm (+ or - 0.2 mm) and

1490 mm (+ or - 10 mm);

(vi) 51.5 mm (+ or - 1.5 mm), 15.0 mm (+ or - 0.2 mm) and

1820 mm (+ or - 10 mm);

(vii) 66.5 mm (+ or - 1.5 mm), 17.1 mm (+ or - 0.2 mm) and

2335 mm (+ or - 10 mm);

(viii) 81.5 mm (+ or - 1.5 mm), 21.0 mm (+ or - 0.25 mm) and

2780 mm, (+ or - 20 mm);

Tariff Description

===========================================================================


(ix) 101.5 mm (+ or - 1.5 mm), 22.0 mm (+ or - 0.25 mm) and

3275 mm (+ or - 25 mm)

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107347

4009.31.90 HOSE, moulded, re-inforced synthetic cord having ALL of the

following specifications:

(a) covered by EITHER of the following synthetic materials;

(i) ethylene propylene terpolymer;

(ii) carboxylate nitrate butaidene;

(b) burst pressure of NOT less than 800 kPa;

(c) internal diameter NOT greater than 51 mm

(d) capable of operating at a temperature of a minimum of 20

degrees C and a maximum of 82 degrees C

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107348

4009.31.90 HOSE, AUTOMOTIVE REFRIGERANT, incorporating a thermo plastic barrier

between two elastomeric layers

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107614

4009.31.90 HOSE, double carcass of vulcanised rubber, reinforced with woven

high tenacity polyester fibre material, having ALL of the following:

(a) ID NOT less than 50 mm;

(b) lengths NOT less than 200 m;

(c) capable of withstanding a peak maximum working pressure of

30 bar (440 PSI) or greater;

(d) maximum continuous working pressure of 21 bar (300 PSI) or

greater;

(e) non-bursting pressure of 50 bar (720 PSI) or greater;

(f) breaking load safety factor > 3;

(g) diametric swell under maximum pressure 8-9%;

(h) average elongation 2%;

(i) empty weight NOT less than 1.35 kg/m;

(j) full weight NOT less than 6.11 kg/m;

(k) maximum operating temperature 50 degrees C (pH-9);

(l) minimum sevice load (200 m hose full of water + pump)

1.6 tonne

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107615

4009.31.90 HOSE, SAND AND SHOT BLAST, textile reinforced rubber, static

dissipating, having a minimum burst pressure of 3.0 MPa

Op. 01.01.2002 Dec. 11.01.2002 - TC 0111127

4009.31.90 HOSE, power steering pressure line, to Specification SAE J188

Op. 01.01.2002 Dec. 03.01.2002 - TC 0202113

4009.32.10 HOSE, power steering pressure line, to Specification SAE J188

Op. 01.01.2002 Dec. 01.07.2009 - TC 0921717

4009.32.90 WELDING HOSE ASSEMBLIES, having BOTH of the following:

(a) welding hose fittings;

(b) welding hoses, having ALL of the following:

(i) rubber inner layer;

(ii) textile inner layer;

(iii) rubber outer layer

Op. 19.01.2011 Dec. 18.04.2011 - TC 1102984

4009.32.90 HOSES, ABRASIVE FLUID CONVEYING

Op. 08.11.2006 Dec. 19.01.2007 - TC 0618383

4009.32.90 CONNECTORS, bicycle pump

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105781

4009.41.90 HOSE, SUCTION AND DISCHARGE, BEVERAGE AND FOOD PRODUCTS,

multi-layered, having ALL of the following:

Tariff Description

===========================================================================


(a) covers, being natural OR synthetic rubber compounds, with

OR without plastic additives;

(b) tubes, being natural OR synthetic rubber compounds with

OR without plastic additives;

(c) synthetic textile reinforcement with OR without embedded

steel wire OR plastic helix reinforcement

Op. 21.04.2015 Dec. 06.07.2015 - TC 1515312

4009.41.90 HOSE, LIQUID PETROLEUM GAS, textile braid and copper

strand reinforced, having ALL of the following:

(a) working pressure NOT greater than 27 bar;

(b) operating temperature NOT less than minus 45 degrees

Celsius and NOT greater than 75 degrees Celsius;

(c) inner diameter NOT less than 9 mm and NOT greater

than 105 mm;

(d) outer diameter NOT less than 18 mm and NOT greater

than 120 mm

Op. 21.08.2012 Dec. 19.11.2012 - TC 1230837

4009.41.90 TUBES, rubber, plastic casing, in lengths NOT less than 90 mm

and NOT greater than 160 mm

Op. 07.06.2006 Dec. 25.08.2006 - TC 0609748

4009.41.90 HOSE, RUBBER, reinforced with synthetic textile material and

having a helix of embedded steel or plastic

Op. 29.11.2006 Dec. 02.03.2007 - TC 0619086

4009.41.90 HOSE, hydraulic, multi-spiral, conforming to SAE J517 100R12

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105774

4009.41.90 HOSE, petrol pump dispenser, having a nominal ID of 16 mm OR

25 mm

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105778

4009.41.90 HOSE, petrol pump dispenser, having an internal diameter,

of 15.87 mm + or - 0.8 mm OR 19.1 mm + or - 0.8 mm, OR 25.4 mm

+ or - 0.8 mm

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105779

4009.41.90 HOSE, synthetic rubber, polyester inner braid, single steel wire

braid reinforced, braided polyester cover, having a temperature

range -48 degrees C to +148 degrees C, having the characteristics

listed in The Table

THE TABLE

OD ID Minimum Burst Pressure

(a) 13.2 mm 4.8 mm 41.3 MPA

(b) 14.7 6.3 41.3

(c) 17.0 7.8 41.3

(d) 19.5 10.4 34.4

(e) 23.3 12.7 34.4

(f) 27.4 16.0 20.6

(g) 31.2 22.3 11.0

(h) 38.1 28.4 8.6

(i) 43.6 35.0 6.8

(j) 56.3 45.9 8.2

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105839

4009.41.90 JOINTS, flexible rubber, tubular form, bore 30 mm OR greater but NOT

exceeding 640 mm

Op. 01.01.2002 Dec. 07.01.2002 - TC 0107344

4009.41.90 HOSE, AUTOMOTIVE REFRIGERANT, incorporating an internal

polychloroprene lining

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107345

Tariff Description

===========================================================================


4009.41.90 HOSES, AIR BRAKE, having ALL of the following characteristics:

(a) either 2 OR 4 spiral polyester reinforcement;

(b) ethylene-propylene-non-conjugated diene rubber (EPDM)

tube and cover;

(c) temperature range -40 degrees F to +200 degrees F

Op. 01.01.2002 Dec. 27.02.2002 - TC 0201205

4009.42.90 FLOATING HOSE, DREDGING, rubber

Op. 21.07.2009 Dec. 02.10.2009 - TC 0925987

4009.42.90 HOSES, FLOATING, rubber, reinforced with steel cable layers

Op. 09.04.2009 Dec. 03.07.2009 - TC 0912064

4009.42.90 HOSES, SUBMARINE, rubber, reinforced with steel cable layers

Op. 09.04.2009 Dec. 03.07.2009 - TC 0912063

4009.42.90 HOSES, LIQUEFIED PETROLEUM GAS (LPG), complying with

Australia/New Zealand Standard AS/NZS 1869/1996 AND having BOTH

of the following:

(a) chloroprene covers;

(b) collared fittings

Op. 16.10.2007 Dec. 04.01.2008 - TC 0717568

4009.42.90 HOSE, manufactured to API Specifications Grade D (tested to

68 950.0 kPa) or Grade C (tested to 51 712.5 kPa), with external

connections, being EITHER of the following:

(a) rotary drilling hose having BOTH of the following dimensions:

(i) a length of 10.67 m or greater but NOT exceeding 27.43 m;

(ii) an ID of 50.8 mm or greater but NOT exceeding 101.6 mm;

(b) vibrator hose having BOTH of the following dimensions:

(i) a length of 2.44 m or greater but NOT exceeding 7.62 m;

(ii) an ID of 50.8 mm or greater but NOT exceeding 101.6 mm

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105785

4009.42.90 HOSE, OIL, complying with Oil Companies International Marine Forum

(OCIMF) standard, having ALL of the following:

(a) length exceeding 9 m;

(b) bore of 300 mm OR greater;

(c) crude oil resistant to 100 degrees C;

(d) built in flanges

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107339

4009.42.90 HOSE, FLOATING, complying with Oil Companies International Marine

Forum (OCIMF) standard, in lengths 9.1 m to 12.2 m with bore of

200 mm OR greater, having a carcass reinforced with textile cord and

steel wire, having ALL of the following:

(a) inner lining of vulcanised rubber;

(b) built in floatation;

(c) pressure rating of each carcass 19 bar OR greater;

(d) built in end fittings

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107341

4009.42.90 JOINTS, flexible rubber, tubular form, bore 30 mm OR greater but NOT

exceeding 640 mm

Op. 01.01.2002 Dec. 04.01.2002 - TC 0107414

4010.11.00 CONVEYOR BELTS, BUCKET ELEVATOR, having a maximum heat

resistance exceeding 115 degrees Celsius

Op. 31.12.2015 Dec. 04.04.2016 - TC 1600025

4010.12.00 BELTS, GROOVED FILTER, having a width in excess of 2 000 mm

Tariff Description

===========================================================================


Op. 18.06.1998 Dec. 04.09.1998 - TC 9805284

4010.12.00 TRANSPORT BELTS, VACUUM FILTER, rubber, polyester AND/OR polyamide

fabric reinforced, having ALL of the following:

(a) length NOT less than 49 500 mm;

(b) width NOT less than 3 200 mm;

(c) thickness NOT less than 30 mm but NOT exceeding 40 mm;

(d) recessed surface containing lateral grooves, sloped towards

the centre of the belt

Op. 20.05.1999 Dec. 08.10.1999 - TC 9903553

4010.19 BELTS OR BELTING FABRIC OR STEELCORD, having ALL of the following

specifications:

(a) flat crossrigid by incorporating 1 (one) only cross rigid

fabric ply, plus from 1-6 only tensile member plies;

(b) designed to achieve sagging of 2% or less over the belt

width;

(c) incorporating corrugated textile reinforced side walls;

(d) incorporating textile reinforced cleats;

(e) having a belt width exceeding 490 mm

Op. 01.07.1996 Dec. 18.06.1996 - TC 9603506

4010.31.00 BELTS OR BELTING, power transmission, having moulded teeth OR

notches running transversely across the inner surface, but NOT

including batten belts OR belting

Op. 01.01.2002 Dec. 13.01.2002 - TC 0105866

4010.31.00 BELTS, banded vee, but NOT including EITHER of the following:

(a) E section belts;

(b) 5 vee or 8 vee section belts having a side circumference

exceeding 4.5 m

Op. 01.01.2002 Dec. 07.01.2002 - TC 0105868

4010.31.00 BELTS, transmission, automotive, endless, of raw edge construction

Op. 01.01.2002 Dec. 07.01.2002 - TC 0105872

4010.31.00 BELTS, transmission, endless, having tensile members of polyester

OR aramid fibres, having EITHER of the following specifications:

(a) multi-vee rib belts:

(i) J section (a groove pitch centre of 2.35 mm or greater

but NOT exceeding 2.41 mm (3/32 in. + or - 0.0001 in.));

(ii) K section (a groove pitch centre of 3.40 mm or greater

but NOT exceeding 3.71 mm (0.140 in. + or - 0.002 in.));

(iii) L section (a groove pitch centre of 4.65 mm or greater


(iv) M section (a groove pitch centre of 9.32 mm or greater


(b) polyurethane ribbed top, having a groove angle of 60 degrees

and top width of 3 mm, 5 mm, 7 mm or 11 mm

Op. 01.01.2002 Dec. 07.01.2002 - TC 0105874

4010.31.00 BELTS, vee, having vee on BOTH inner and outer driving edges of

the belt (double sided)

Op. 01.01.2002 Dec. 07.01.2002 - TC 0105887

4010.31.00 BELTS, transmission, M section

Op. 01.01.2002 Dec. 13.01.2002 - TC 0105889

4010.31.00 BELTS, vee, in the SPA or SPC Range

Op. 01.01.2002 Dec. 07.01.2002 - TC 0105891

4010.31.00 BELTS, transmission, endless

Op. 01.01.2002 Dec. 03.01.2002 - TC 0107312

Tariff Description

===========================================================================


4010.31.00 TRANSMISSION BELTS, AUTOMOTIVE, endless, raw edge 3 ply laminated

construction

Op. 01.01.2002 Dec. 14.01.2002 - TC 0107325

4010.31.00 TRANSMISSION BELTS, AUTOMOTIVE, endless, polyester or aramid fibre,

flex bonded tensile members

Op. 01.01.2002 Dec. 13.01.2002 - TC 0107410




Op. 01.01.2002 Dec. 13.01.2002 - TC 0105867




exceeding 4.5 m

Op. 01.01.2002 Dec. 07.01.2002 - TC 0105869


Op. 01.01.2002 Dec. 07.01.2002 - TC 0105873


Op. 01.01.2002 Dec. 13.01.2002 - TC 0105890


Op. 01.01.2002 Dec. 07.01.2002 - TC 0105892


Op. 01.01.2002 Dec. 03.01.2002 - TC 0107313


Op. 01.01.2002 Dec. 07.01.2002 - TC 0105904

4010.33.00 TRANSMISSION BELTS, AUTOMOTIVE, endless, of raw edge construction

Op. 01.01.2002 Dec. 14.01.2002 - TC 0107321


Op. 01.01.2002 Dec. 03.01.2002 - TC 0107323




exceeding 4.5 m

Op. 01.01.2002 Dec. 07.01.2002 - TC 0105899


Op. 01.01.2002 Dec. 07.01.2002 - TC 0105905


Op. 01.01.2002 Dec. 03.01.2002 - TC 0107324

4010.35.00 BELTS OR BELTING, POWER TRANSMISSION, having moulded teeth or

notches running transversely across both the inner and outer

surfaces

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105840



surfaces

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105842

4010.35.00 BELTS OR BELTING, power transmission, having moulded teeth or


Tariff Description

===========================================================================


including batten belts or belting

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105843



surfaces

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105844

4010.36.00 BELTS OR BELTING, power transmission, having moulded teeth or


including batten belts or belting

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105864

4010.39.00 KITS, MOTOR VEHICLE TIMING BELT AND/OR MULTI V-BELT, consisting

of one OR more rubber timing belts AND/OR multi V-belts AND

including ANY of the following:

(a) one OR two belt tensioners;

(b) one OR two idler pulleys;

(c) one OR two damper tensioners

Op. 28.03.2013 Dec. 24.06.2013 - TC 1310931

4010.39.00 BELTING, endless, polyvinyl chloride/nylon reinforced, having

BOTH of the following:

(a) width NOT exceeding 55 mm;

(b) endless length NOT exceeding 86.4 m

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105958




Op. 01.01.2002 Dec. 03.01.2002 - TC 0105962



surfaces

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105963




exceeding 4.5 m

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105964

4010.39.00 BELTS, banded vee, manufactured in accordance with API

Specification IB Fifth Edition 1978

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105965

4010.39.00 BELTS, drive, cassette player or cassette recorder

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105966


Op. 01.01.2002 Dec. 03.01.2002 - TC 0105967


Op. 01.01.2002 Dec. 03.01.2002 - TC 0105969

4010.39.00 BELTS, turntable, record player

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105970

4010.39.00 BELTS, vee, having vee on BOTH inner and outer driving edges of

the belt (double sided)

Op. 01.01.2002 Dec. 03.01.2002 - TC 0105971


Tariff Description

===========================================================================


Op. 01.01.2002 Dec. 03.01.2002 - TC 0105972

4010.39.00 BELTING OR TAPES, TRANSMISSION, CARRIER OR BOX FOLDING,

anti-static, woven polyester with one or more outer layers of

acrylonitrile-butadiene rubber (NBR), maximum thickness 6 mm

and maximum width 600 mm

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107416


Op. 01.01.2002 Dec. 04.01.2002 - TC 0107842

4010.39.00 BELTS, CORE WINDING, endless, having a breaking strength NOT less

than 1 250 kp/sq cm

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107843

4010.39.00 BELTING, transmision, flat, anti-static having extruded and/or

woven polyamide reinforcement with one or more outer layers of

acrylo-Nitrile-Butadiene Rubber (NBR)

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107844

4011.10.00 TYRES, MOTOR CAR, in ANY of the following sizes:

(a) 30x9.5 R15;

(b) 315/70 R17;

(c) 315/75 R16;

(d) 32x11.5 R15;

(e) 33x12.5 R15;

(f) 35x12.5 R15;

(g) 35x12.5 R18;

(h) 37x12.5 R15;

(i) 37x13.5 R20;

(j) 37x13.5 R22;

(k) 38x15.5 R18;

(l) 38x15.5 R20;

(m) 40x13.5 R20

Op. 16.02.2010 Dec. 15.07.2010 - TC 1008324

4011.10.00 TYRES, MOTOR VEHICLE

Op. 01.05.2010 Dec. 11.06.2010 - TC 1013129

4011.10.00 TYRES, PHNEUMATIC, SMOOTH TREAD (SLICKS), MOTOR CAR CIRCUIT OR DRAG

RACING, having a rim diameter of one of the following sizes:

(a) 16 inch (40.69 cm);

(b) 17 inch (43.23 cm);

(c) 18 inch (45.77 cm);

(d) 19 inch (48.32 cm)

Op. 22.11.1996 Dec. 28.02.1997 - TC 9612516

4011.10.00 TYRES, GO-CART, PNEUMATIC, having a rim diameter of 6 inches

(15.22 cm) OR less

Op. 13.12.1996 Dec. 28.02.1997 - TC 9613013

4011.10.00 TYRES, OFF-ROAD, MOTOR CAR CIRCUIT OR DRAG RACING, pneumatic, with

tyre marking having reference to the following features:

(a) section width;

(b) outside diameter;

(c) type of tyre;

(d) rim diameter

Op. 13.12.1996 Dec. 15.03.1997 - TC 9613014

4011.10.00 TYRES, GO KART, in ANY of the following sizes:

(a) 40/100-5;

(b) 45/100-5;

(c) 55/110-5;

(d) 60/110-5;

Tariff Description

===========================================================================


(e) 71/110-5;

(f) 75/115-5;

(g) 50/110-6;

(h) 70/120-6;

(i) 80/120-6

Op. 23.12.1996 Dec. 15.03.1997 - TC 9613224

4011.10.00 PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years

before the goods are entered for home consumption, or reproductions

of these parts, being tyres having ALL of the following:

(a) white sidewalls as an intergral part of the tyre construction;

(b) size P175/80R13 or P185/80R13;

(c) bias ply or radial construction

Op. 10.04.1997 Dec. 20.06.1997 - TC 9702588



of these parts, being tyres having ALL of the following:

(a) white sidewalls as an integral part of the tyre construction;

(b) size G78-14, L78-15;

(c) ply construction

Op. 10.04.1997 Dec. 20.06.1997 - TC 9702643

4011.10.00 TYRES, PNEUMATIC, SMOOTH OR GROOVED TREAD, MOTOR CAR CIRCUIT OR

DRAG RACING, having a rim diameter of between 13 inches and 20

inches (330.2 mm to 508 mm) inclusive, with tyre markings having

reference to ALL of the following:

(a) section width;

(b) outside diameter;

(c) rim diameter

Op. 20.03.1997 Dec. 19.05.1997 - TC 9703897

4011.10.00 TYRES, PASSENGER MOTOR VEHICLE, manufactured at least 30 years


of these tyres, having BOTH of the following:

(a) rim diameter exceeding 430 mm;

(b) bias ply construction of 4 ply, 6 ply or 8 ply

Op. 17.02.1998 Dec. 24.04.1998 - TC 9801449

4011.20 TYRES, radial, low platform trailer, 8.25 R15 18 ply rating

Op. 31.05.1991 Dec. 19.08.1992 - TC 9105119

4011.20.00 TYRES, BUS OR LORRY, pneumatic, with OR without tubes AND/OR

flaps

Op. 27.03.2015 Dec. 23.06.2015 - TC 1512433

4011.20.00 TYRES, BUS OR LORRY

Op. 01.05.2010 Dec. 11.06.2010 - TC 1013771

4011.20.00 TYRES, BUS AND/OR TRUCK, being 8.25R16

Op. 16.04.2009 Dec. 30.09.2009 - TC 0912630

4011.20.00 TYRES, BUSES OR LORRIES, having ANY of the following size

specifications:

(a) 255/70R22.5;

(b) 275/70R22.5;

(c) 295/60R22.5;

(d) 295/75R22.5;

(e) 305/70R22.5;

(f) 315/70R22.5;

(g) 315/80R22.5;

(h) 385/55R22.5;

(i) 385/65R22.5;

(j) 425/65R22.5;

Tariff Description

===========================================================================


(k) 445/65R22.5;

(l) 9R22.5;

(m) 10R22.5;

(n) 13R22.5

Op. 16.02.2006 Dec. 10.05.2006 - TC 0608228

4011.20.00 TYRES, low platform trailer, 7.50 R15 and 215/75 R17.5

Op. 05.05.1993 Dec. 13.08.1993 - TC 9305541

4011.20.00 TYRES, low platform trailer, 9.5 R 17.5, 245/70 R 17.5 and

265/70 R 19.5

Op. 09.11.1993 Dec. 04.03.1994 - TC 9313121

4011.61.00 TYRES, AGRICULTURAL OR FORESTRY, pneumatic, with OR without

tubes AND/OR flaps

Op. 27.03.2015 Dec. 23.06.2015 - TC 1512434

4011.61.00 TYRES, having a rim diameter NOT less than 20 cm

Op. 02.09.2005 Dec. 18.11.2005 - TC 0511533

4011.61.00 TYRES, PNEUMATIC, AGRICULTURAL AND/OR FORESTRY

Op. 31.03.2006 Dec. 23.06.2006 - TC 0606193

4011.61.00 TYRES, TRACTOR, having a rim diameter size NOT less than 30 cm

and NOT greater than 107 cm

Op. 28.09.2005 Dec. 08.05.2007 - TC 0706697

4011.61.00 TYRES, pneumatic, having BOTH of the following:

(a) a rating NOT exceeding 16 ply;

(b) a section width NOT less than the rim dia,

NOT being tyres of a kind used for motor racing or on aircraft

Op. 01.01.2002 Dec. 03.01.2002 - TC 0106161

4011.61.00 TYRES, LOG SKIDDER, pneumatic, with a TRA nomenclature of LS2 and

LS3 OR equivalent trade designation

Op. 01.01.2002 Dec. 08.01.2002 - TC 0107628

4011.62.00 TYRES, CONSTRUCTION AND/OR INDUSTRIAL HANDLING VEHICLES AND/OR

MACHINES, pneumatic, having a rim size NOT greater than 61 cm,

with OR without tubes AND/OR flaps

Op. 27.03.2015 Dec. 23.06.2015 - TC 1512435

4011.62.00 TYRES, having a rim diameter NOT less than 20 cm and NOT

greater than 61 cm

Op. 02.09.2005 Dec. 18.11.2005 - TC 0511527

4011.62.00 TYRES, pneumatic, bias ply, with the TRA off the road code

nomenclature of ANY of the following:

(a) E1 to E7 (earthmover);

(b) L2 to L5 (loader and dozer);

(c) C1 to C2 (compactor),

but NOT including ANY of the following:

(a) 1 300 - 24, ply rating of 16 or less, E2, E3 and E4;

(b) 1 400 - 24, ply rating of 16 or less, E2, E3 and E4;

(c) 11.00 - 20, C1 and C2

Op. 01.01.2002 Dec. 07.01.2002 - TC 0107683

4011.62.00 TYRES, PNEUMATIC, OFF THE ROAD, with a TRA code nomenclature of ANY

of the following:

(a) E1 to E7;

(b) L2 to L5;

(c) L3S to L5S;

(d) C1 to C2;

(e) G1 to G4,

Tariff Description

===========================================================================





(c) 750 - 15, C1 and C2;

(d) 750 - 16, C1 and C2

Op. 01.01.2002 Dec. 03.01.2002 - TC 0107685


MACHINES, pneumatic, having a rim size NOT less than 61 cm,


Op. 27.03.2015 Dec. 23.06.2015 - TC 1512436


Op. 02.09.2005 Dec. 18.11.2005 - TC 0511528

4011.63.00 TYRES, pneumatic, having a TRA Off The Road Code nomenclature as

follows:


(b) L2 to L5s (loader and dozer);

with a rim diameter of 25 in AND a ply rating of 20 OR greater

Op. 01.01.2002 Dec. 07.01.2002 - TC 0107629

4011.63.00 TYRES, PNEUMATIC, having BOTH of the following:

(a) rim diameter of 25 in (635 mm);

(b) ply rating of NOT less than 20; and

complying with EITHER of the following standards of the Tyre and Rim

Association of Australia:

(c) standards E1 to E7; or

(d) standards L2 to L5S

Op. 01.01.2002 Dec. 09.01.2002 - TC 0107630









(c) 11.00 - 20, C1 and C2

Op. 01.01.2002 Dec. 07.01.2002 - TC 0107684

4011.63.00 TYRES, PNEUMATIC, OFF THE ROAD, with a TRA code nomenclature of ANY

of the following:

(a) E1 to E7;

(b) L2 to L5;

(c) L3S to L5S;

(d) C1 to C2;

(e) G1 to G4,




(c) 750 - 15, C1 and C2;

(d) 750 - 16, C1 and C2

Op. 01.01.2002 Dec. 03.01.2002 - TC 0107686


Op. 02.09.2005 Dec. 18.11.2005 - TC 0511529





Op. 01.01.2002 Dec. 09.01.2002 - TC 0106160

Tariff Description

===========================================================================


4011.92.00 TYRES, AGRICULTURAL OR FORESTRY, pneumatic, with OR without

tubes AND/OR flaps

Op. 27.03.2015 Dec. 23.06.2015 - TC 1512439


Op. 02.09.2005 Dec. 18.11.2005 - TC 0511530

4011.92.00 TYRES, PNEUMATIC, AGRICULTURAL AND/OR FORESTRY

Op. 27.04.2006 Dec. 14.07.2006 - TC 0607539





Op. 01.01.2002 Dec. 03.01.2002 - TC 0200252


MACHINES, pneumatic, having a rim size NOT greater than 61 cm,


Op. 27.03.2015 Dec. 23.06.2015 - TC 1512438

4011.93.00 TYRES, having a rim diameter NOT less than 15 cm and NOT greater

than 61 cm

Op. 02.09.2005 Dec. 18.11.2005 - TC 0511531





Op. 01.01.2002 Dec. 03.01.2002 - TC 0106183

4011.93.00 TYRES, PNEUMATIC, with a TRA nomenclature of ANY of the following:

of the following:

(a) E1 to E7 ;

(b) L2 to L5 ;

(c) L3S to L5S;

(d) C1 to C2 ;

(e) G1 to G4 ,


(a) 1 300 - 24, ply rating of 16 or less, E2, E3 OR E4;

(b) 1 400 - 24, ply rating of 16 or less, E2, E3 OR E4;

(c) 750 - 15, C1 OR C2;

(d) 750 - 16, C1 OR C2

Op. 01.01.2002 Dec. 03.01.2002 - TC 0107400




(b) L2 to L5S (loader and dozer);





(c) 11.00 - 20, C1 and C2

Op. 01.01.2002 Dec. 07.01.2002 - TC 0107632

4011.93.00 TYRES, pneumatic, radial ply, rim diameter of 20 in or more, but

less than 25 in, TRA off the road code nomenclature of ANY of the

following:



(c) L3S to L5S,

excluding 13.00R24 and 14.00R24 E2, E3 and E4 tyres of 16 ply rating

Tariff Description

===========================================================================


or lower

Op. 01.01.2002 Dec. 03.01.2002 - TC 0107634

4011.93.00 TYRES, pneumatic, bias ply, rim diameter of 20 in to 25 in (+or-5%),

TRA off the road code nomenclature of ANY of the following:




excluding 13.00-24 and 14.00-24 E2, E3 and E4 tyres of 16 ply

rating or lower and also excluding C1 and C2 tyres in size 11.00-20

Op. 01.01.2002 Dec. 07.01.2002 - TC 0107636

4011.93.00 TYRES, INDUSTRIAL, PNEUMATIC, OFF HIGHWAY

Op. 01.01.2002 Dec. 14.01.2002 - TC 0107638

4011.93.00 TYRES, industrial, pneumatic, off highway, in the following sizes

and tread patterns:

Size Tread Pattern

750-16 12PR U Lug

750-16 12PR J Lug

825-12 12PR U Lug

825-20 12PR U Lug

1100-20 16PR U Lug

1600-25 28PR Yard Service


Op. 01.01.2002 Dec. 07.01.2002 - TC 0107681


MACHINES, pneumatic, having a rim size NOT less than 61 cm, with

OR without tubes AND/OR flaps

Op. 27.03.2015 Dec. 23.06.2015 - TC 1512437


Op. 02.09.2005 Dec. 18.11.2005 - TC 0511532

4011.94.00 TYRES, pneumatic, radial ply, with a rim diameter of 25 inches OR

greater, having TRA off the road code nomenclature of ANY of the

following:

(a) E1 to L7 (earthmover);


(c) L3S to L5S (loader and dozer);

(d) G1 to G4 (grader)

Op. 01.01.2002 Dec. 03.01.2002 - TC 0107398

4011.94.00 TYRES, pneumatic, rim diameter of 25 inches OR greater and having



(b) L2 to L5S (loader and dozer)

Op. 01.01.2002 Dec. 07.01.2002 - TC 0107399

4011.94.00 TYRES, PNEUMATIC, with a TRA nomenclature of ANY of the following:

of the following:

(a) E1 to E7 ;

(b) L2 to L5 ;

(c) L3S to L5S;

(d) C1 to C2 ;

(e) G1 to G4 ,


(a) 1 300 - 24, ply rating of 16 or less, E2, E3 OR E4;

(b) 1 400 - 24, ply rating of 16 or less, E2, E3 OR E4;

(c) 750 - 15, C1 OR C2;

(d) 750 - 16, C1 OR C2

Op. 01.01.2002 Dec. 03.01.2002 - TC 0107401

Tariff Description

===========================================================================










(c) 11.00 - 20, C1 and C2

Op. 01.01.2002 Dec. 07.01.2002 - TC 0107633

4011.94.00 TYRES, pneumatic, radial ply, rim diameter of 20 in or more, but

less than 25 in, TRA off the road code nomenclature of ANY of the

following:



(c) L3S to L5S,

excluding 13.00R24 and 14.00R24 E2, E3 and E4 tyres of 16 ply rating

or lower

Op. 01.01.2002 Dec. 03.01.2002 - TC 0107635

4011.94.00 TYRES, pneumatic, bias ply, rim diameter of 20 in to 25 in (+or-5%),





excluding 13.00-24 and 14.00-24 E2, E3 and E4 tyres of 16 ply

rating or lower and also excluding C1 and C2 tyres in size 11.00-20

Op. 01.01.2002 Dec. 07.01.2002 - TC 0107637

4011.94.00 TYRES, INDUSTRIAL, PNEUMATIC, OFF HIGHWAY

Op. 01.01.2002 Dec. 14.01.2002 - TC 0107680

4011.94.00 TYRES, industrial, pneumatic, off highway, in the following sizes

and tread patterns:

Size Tread Pattern

750-16 12PR U Lug

750-16 12PR J Lug

825-12 12PR U Lug

825-20 12PR U Lug

1100-20 16PR U Lug



Op. 01.01.2002 Dec. 07.01.2002 - TC 0107682


Op. 02.09.2005 Dec. 18.11.2005 - TC 0511534





Op. 01.01.2002 Dec. 09.01.2002 - TC 0106286

4012.19.00 TYRES, EARTHMOVER, pneumatic, retreaded, having a rim diameter

NOT less than 41.9 cms

Op. 01.09.2006 Dec. 24.11.2006 - TC 0616374

4012.20.00 TYRES, USED, PNEUMATIC, CAR AND/OR BUS AND/OR LORRY

Op. 13.08.2010 Dec. 08.11.2010 - TC 1037732

4012.20.00 TYRES, USED, PNEUMATIC, EARTHMOVERS, having a rim diameter NOT

less than 41.9 cm (16.5 inches)

Op. 01.03.2006 Dec. 05.05.2006 - TC 0604649

Tariff Description

===========================================================================


4012.20.00 CASINGS, TYRE, TRUCKS AND/OR BUSES, used

Op. 09.08.2006 Dec. 27.10.2006 - TC 0613391

4012.90.00 TYRES, MINING AND/OR EARTHMOVING EQUIPMENT, semi solid cushion,

having voids and chemically bonded rim

Op. 20.06.2011 Dec. 12.09.2011 - TC 1119753

4012.90.00 TYRES, SOLID CUSHION, MINING EARTHMOVER, having a diameter NOT

less than 120 cm

Op. 16.08.2006 Dec. 10.11.2006 - TC 0613547

4012.90.00 FLAPS, TYRE, having a rim diameter NOT less than 25 mm

Op. 19.07.2007 Dec. 21.09.2007 - TC 0711688

4012.90.00 TYRES, solid or cushion, golf buggy

Op. 06.05.1993 Dec. 14.03.2008 - TC 0804078

4012.90.00 FLAPS, PNEUMATIC TYRE, EARTHMOVER, LOADER OR DOZER

Op. 05.12.1996 Dec. 28.02.1997 - TC 9612787

4012.90.00 TYRES, resilient and cushion, solid rubber, industrial, with a rim

diameter of between 20.32 cm and 63.5 cm (8" and 25"), being split

rims with no bonding between wheel rim and tyre

Op. 31.01.1997 Dec. 27.03.1997 - TC 9702425

4013.10 TUBES, motor car circuit or drag racing

Op. 01.01.1988 Dec. 01.01.1988 - TC 8533642

4013.10 TUBES, motor vehicle, having a rim dia of 254 mm or greater

but NOT exceeding 381 mm

Op. 21.08.1985 Dec. 28.02.1986 - TC 8533936

4013.10.00 TUBES, having a rim diameter NOT less than 25 mm

Op. 24.10.2005 Dec. 23.01.2006 - TC 0514786

4013.90 TUBES, motorcycle or motor scooter

Op. 01.01.1988 Dec. 01.01.1988 - TC 8533613

4013.90 TUBES, motor vehicle, having a rim dia of 254 mm or greater

but NOT exceeding 381 mm

Op. 01.01.1988 Dec. 01.01.1988 - TC 8800404

4013.90 TUBES, inner, idler wheel, agricultural crawler tractor

Op. 14.09.1988 Dec. 06.12.1988 - TC 8808303

4013.90.00 INNER TUBES, rubber

Op. 18.03.2014 Dec. 11.06.2014 - TC 1409595

4013.90.00 TUBES, having a rim diameter NOT less than 25 mm

Op. 24.10.2005 Dec. 23.01.2006 - TC 0514787

4013.90.00 TUBES, PNEUMATIC, EARTHMOVER, LOADER, DOZER OR COMPACTOR, but NOT

including tubes for tyres with the Transport and Road Authority

(TRA) off the road code nomenclature of ANY of the following sizes:

(a) 13.00-24.00 inches;

(b) 14.00-24.00 inches;

(c) 11.00-20.00 inches

Op. 10.12.1996 Dec. 28.02.1997 - TC 9612912

4014.90 SHIELDS, nipple

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340205

4014.90 BAGS, hot water

Tariff Description

===========================================================================


Op. 25.10.1983 Dec. 25.10.1983 - TC 8340563

4014.90 COTS, finger

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340564

4014.90 DIAPHRAGMS, vaginal

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340566

4014.90 TEATS, veterinary, bottle type

Op. 12.08.1988 Dec. 11.08.1989 - TC 8810237

4014.90.00 TEATS, baby

Op. 15.06.1993 Dec. 24.09.1993 - TC 9304530

4014.90.00 CHILD SAFETY AND HYGIENE PRODUCTS, being a nasal aspirator

Op. 26.05.1993 Dec. 10.09.1993 - TC 9305041

4015.11 GLOVES, latex, surgical

Op. 01.08.1989 Dec. 20.09.1990 - TC 8906233

4015.11.00 GLOVES, SURGICAL

Op. 04.05.2007 Dec. 13.07.2007 - TC 0702171

4015.19 GLOVES, leaded rubber, for protection from radiation

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340594

4015.19 GLOVES, neoprene, shoulder length

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340596

4015.19 GLOVES, latex, medical examination, non sterile

Op. 11.09.1989 Dec. 21.09.1990 - TC 8907468

4015.19 GLOVES, nitrile, medical examination

Op. 25.02.1992 Dec. 13.08.1992 - TC 9202531

4015.19 GLOVES, butyl rubber, chemical hazard protection

Op. 13.08.1992 Dec. 04.01.1993 - TC 9207400

4015.19.10 MITTS, WEIGHT LIFTING, neoprene, NOT having full length fingers

Op. 01.01.2002 Dec. 10.01.2002 - TC 0109485

4015.19.90 GLOVES, MEDICAL

Op. 04.05.2007 Dec. 13.07.2007 - TC 0702034

4015.19.90 GLOVES, household type

Op. 01.01.2002 Dec. 03.01.2002 - TC 0107403

4015.19.90 GLOVES, LABORATORY, latex

Op. 01.01.2002 Dec. 07.01.2002 - TC 0107404

4015.19.90 GLOVES, neoprene, underwater diving

Op. 01.01.2002 Dec. 04.01.2002 - TC 0107405

4015.19.90 GLOVES, nitrile, chemically resistant

Op. 01.01.2002 Dec. 04.01.2002 - TC 0107406

4015.19.90 GLOVES, RUBBER, INDUSTRIAL, having an overall length NOT exceeding

355 mm, but NOT including electrical insulating gloves conforming

to AS 2225 OR IEC 903 OR ASTM D 120

Op. 01.01.2002 Dec. 04.01.2002 - TC 0107407

4016.10 WINDSHIELDS, microphone

Op. 28.10.1986 Dec. 20.02.1987 - TC 8635998

Tariff Description

===========================================================================


4016.10.00 BARRIER PANELS, NOISE REDUCTION, foldable, including BOTH of the

following:

(a) panel securing eyelets;

(b) reflective safety strips

Op. 03.11.2014 Dec. 28.01.2015 - TC 1438139

4016.10.00 SHEETS, LATEX FOAM, cut to shape of mattress

Op. 18.11.2008 Dec. 06.02.2009 - TC 0840198

4016.10.00 PASSENGER MOTOR VEHICLE CELLULAR RUBBER ARTICLES, being body,

windscreen, door and boot seals, gaskets and grommets for vehicles

manufactured prior to 1965, moulded specifically to shape for a

particular vehicle/model, excluding die-cut gaskets or seals.

Op. 07.04.1994 Dec. 11.08.1994 - TC 9404024

4016.10.00 DONUTS, latex, hydrophilic

Op. 16.03.1999 Dec. 28.05.1999 - TC 9901844

4016.91 MATS, rubber, having suction cups on the underside

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340630

4016.91.00 PAVERS, RUBBER, powder coated, including ALL of the following:

(a) length NOT greater than 1 050 mm;

(b) thickness NOT greater than 20 mm;

(c) bevelled edges

Op. 07.08.2013 Dec. 04.11.2013 - TC 1326547

4016.91.00 PAVERS, rubber, imitation masonry powder coating, chamfered top

edging, having BOTH of the following:

(a) length NOT greater than 550mm;

(b) thickness NOT greater than 20 mm

Op. 22.03.2012 Dec. 15.06.2012 - TC 1209546

4016.91.00 FLOOR TILES, styrene butadiene rubber, hammered finish OR stud

finish, having BOTH of the following:

(a) length each side NOT less than 50 cm;

(b) thickness NOT less than 2.8 mm and NOT greater than 4.2 mm

Op. 14.04.2010 Dec. 02.07.2010 - TC 1017260

4016.91.00 MATTING, rubber, with raised discs on one surface, in rolls

having a length NOT less than 9 m

Op. 16.10.2008 Dec. 14.01.2009 - TC 0835936

4016.93 REPAIR KITS, comprised of O-rings, seals, diaphragms, tubing

connectors and the like, put up in sets for the overhaul of

life support ventilators or respirators

Op. 15.09.1987 Dec. 11.04.1988 - TC 8734922

4016.93.00 SEALING SYSTEMS, INTERNAL PIPE REPAIR, consisting of BOTH of the

following:

(a) stainless steel tension bands;

(b) seals, having compositions of ANY of the following:

(i) ethylene propylene diene monomer (EPDM);

(ii) nitrile butadiene rubber (NBR);

(iii) fluororubber (FKM)

Op. 11.03.2015 Dec. 07.06.2015 - TC 1510106

4016.93.00 SEALS, BLOWOUT PREVENTER, DRILLING WELL, synthetic rubber

Op. 12.02.2015 Dec. 04.05.2015 - TC 1506135

4016.93.00 SLEEVES, RUBBER RING, KNIFE GATE VALVE, metal reinforced

Op. 07.05.2014 Dec. 08.10.2014 - TC 1415336

4016.93.00 SEALS, BLAST FURNACE, rubber, inflatable

Tariff Description

===========================================================================


Op. 06.07.2010 Dec. 29.09.2010 - TC 1030521

4016.93.00 SEAL RINGS, having ALL of the following:

(a) diameter NOT greater than 250 mm;

(b) temperature resistance NOT less than minus 40 degrees

Celsius and NOT greater than 200 degrees Celsius;

(c) rubber composition being ANY of the following:

(i) nitrile butadiene rubber(NBR);

(ii) fluorocarbon rubber;

(iii) ethylene propylene diene monomer(EPDM) rubber

Op. 25.02.2010 Dec. 21.05.2010 - TC 1009885

4016.93.00 PACKERS, rubber, expandable

Op. 03.07.2009 Dec. 18.09.2009 - TC 0923108

4016.93.00 GASKETS, BLAST FURNACE COOLING PIPE OR THERMOCOUPLE, rubber

Op. 16.01.2009 Dec. 14.04.2009 - TC 0901469

4016.93.00 GASKETS,SEGMENT SEALING, compression, ethylene propylene

diene monomer (EPDM), having ALL of the following:

(a) length of gasket segment NOT less than 1 000 mm;

(b) NOT less than 59 durometer hardness A;

(c) tensile strength NOT less than 10 N/mm2 and with

100% strain NOT less 3 N/mm2;

(d) elongation at break NOT less than 300%;

(e) tensile stress NOT less than 9 N/mm2 at 300% strain

Op. 16.01.2007 Dec. 13.04.2007 - TC 0700892

4016.93.00 PARTS, ON-ROAD TRUCKS HAVING A GROSS VEHICLE WEIGHT NOT LESS

THAN 7.5 TONNES, being ANY of the following:

(a) o-rings;

(b) seals;

(c) gaskets;

(d) washers;

(e) grommets;

Op. 17.10.2007 Dec. 16.01.2008 - TC 0717751

4016.93.00 GROMMETS, SEALING, white silicon, flexible pipe penetration

Op. 19.12.2007 Dec. 07.03.2008 - TC 0718648

4016.93.00 PARTS, EARTHMOVING EQUIPMENT AND/OR OFF-HIGHWAY DUMP TRUCKS,

rubber, being EITHER of the following:

(a) O-rings;

(b) seals

Op. 22.08.2008 Dec. 14.11.2008 - TC 0827892

4016.93.00 PASSENGER MOTOR VEHICLE RUBBER ARTICLES, being body, windscreen,

door and boot seals, gaskets or grommets for vehicles manufactured

prior to 1965, moulded specifically to shape for a particular

vehicle/model, excluding die-cut gaskets or seals.

Op. 07.04.1994 Dec. 11.08.1994 - TC 9404025

4016.93.00 SEALS, gaskets and washers, being parts of ANY of the following

aluminium working machines:

(a) scroll shear;

(b) can body maker;

(c) can end press;

(d) can cupping press;

(e) flanger and or necker;

(f) can trimmer

Op. 19.08.1994 Dec. 02.12.1994 - TC 9406937

4016.93.00 "O" RINGS, halogenated nitrile butadiene rubber

Op. 29.08.1994 Dec. 02.12.1994 - TC 9407280

Tariff Description

===========================================================================



before 16 August 1995, or reproductions of these parts, being

ANY of the following:

(a) gaskets;

(b) washers;

(c) seals

Op. 16.08.1995 Dec. 24.11.1995 - TC 9509780



of these parts, being ANY of the following:

(a) gaskets;

(b) washers;

(c) seals

Op. 10.04.1997 Dec. 20.06.1997 - TC 9702590

4016.93.00 SEALS, WATCH CASE, waterproof

Op. 10.12.1997 Dec. 06.03.1998 - TC 9710842

4016.93.00 GASKETS, ELECTROLYSER ELECTRODE, being cathode and anode

Op. 17.12.1997 Dec. 06.03.1998 - TC 9711119

4016.93.00 SEALING RINGS, FOOD GRADE, natural rubber

Op. 24.11.1998 Dec. 05.02.1999 - TC 9810240

4016.93.00 SEALS, OIL FILM BEARING

Op. 06.03.2001 Dec. 11.05.2001 - TC 0102068

4016.93.00 GASKETS, REFRIGERATOR, magnetic

Op. 06.08.2004 Dec. 18.10.2004 - TC 0408102

4016.94.00 PARTS, WHARF FENDER SYSTEM, being marine cones

Op. 12.08.2009 Dec. 30.10.2009 - TC 0929535

4016.94.00 FENDERS, MARINE, VESSEL OR WHARF, having a rated reaction force

NOT less than 20 kN

Op. 09.06.2009 Dec. 28.08.2009 - TC 0919318

4016.94.00 FENDERS, MARINE, INFLATABLE, vulcanised rubber

Op. 12.06.2007 Dec. 17.08.2007 - TC 0708851

4016.94.00 FENDERS, SHIP OR WHARF, inflatable, with or without protector

panel, rubber incorporating a tyre cord layer

Op. 03.06.2008 Dec. 02.09.2008 - TC 0811231

4016.94.00 FENDERS, FLOATING, SHIP OR WHARF, inflatable, with or without

chain AND/OR tyre protector, rubber incorporating a tyre cord

layer, complying with International Standard ISO 17357

Op. 03.06.2008 Dec. 02.09.2008 - TC 0811232

4016.94.00 FENDERS, MARINE, length NOT less than 2 m

Op. 21.07.2008 Dec. 10.10.2008 - TC 0822669

4016.95 SPHERES, STOPPERS OR SEPARATORS, inflatable, pipeline

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340233

4016.95 MATTRESSES, rubber, inflatable

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340631

4016.95 IDLERS, pneumatic, rubber tracked agricultural tractor

Op. 14.09.1988 Dec. 06.12.1988 - TC 8808305

4016.95 CELL, moulded to fit an oil conservator tank, having BOTH of the

following:

Tariff Description

===========================================================================


(a) fabric resistant to transformer oil at temperatures up to

100 degrees C;

(b) air permeability NOT exceeding 100 cu cm/24 h when tested at

100 kPa

Op. 18.09.1990 Dec. 29.11.1990 - TC 9005839

4016.95.00 BLADDERS, BUILDING SLEEVES AND CENTRE SLEEVES, MOTOR VEHICLE TYRE

Op. 31.07.1997 Dec. 10.10.1997 - TC 9706690

4016.95.00 CURING TUBES, MOTOR VEHICLE OR AIRCRAFT TYRE

Op. 13.11.1997 Dec. 06.02.1998 - TC 9710035

4016.95.00 BLADDERS, HYDRO-PNEUMATIC ACCUMULATOR

Op. 15.05.1998 Dec. 24.07.1998 - TC 9804131

4016.99 PRINTERS" ROLLS, being hand tools

Op. 25.10.1983 Dec. 25.10.1983 - TC 8340253

4016.99 PATCHES, steel cord radial ply tyre

Op. 01.08.1984 Dec. 01.08.1984 - TC 8432352

4016.99 RAM PACKINGS, blow-out preventer

Op. 08.08.1984 Dec. 08.08.1984 - TC 8432565

4016.99 PLUGS, having an OD of 114.30 mm or greater but NOT exceeding

339.73 mm, being ANY of the following:

(a) bypass plugs;

(b) indicating plugs;

(c) shut off plugs;

(d) trip plugs

Op. 24.10.1984 Dec. 24.10.1984 - TC 8432712

4016.99 MEMBRANES, neoprene rubber, lycra reinforced

Op. 04.11.1985 Dec. 08.07.1986 - TC 8534908

4016.99 BANDS, rubber, office type

Op. 11.08.1986 Dec. 13.02.1987 - TC 8634564

4016.99 PLUGS, repair, tubeless tyre

Op. 12.09.1986 Dec. 12.09.1986 - TC 8635115

4016.99 REPAIR KITS, bicycle tube

Op. 17.09.1986 Dec. 18.09.1987 - TC 8635168

4016.99 PATCHES, tyre repair, being ALL of the following:

(a) bias ply or radial;

(b) rayon or polyamide cord fibre reinforced;

(c) feather edged;

(d) suitable for BOTH hot cure and chemical cure

Op. 30.09.1986 Dec. 17.12.1986 - TC 8635484

4016.99 HANDRAIL, escalator or moving pathway

Op. 17.11.1988 Dec. 17.05.1989 - TC 8810440

4016.99 BANDS RUBBER, orthodontic, capable of being stretched three times

the resting diameter

Op. 16.02.1990 Dec. 18.06.1990 - TC 9002562

4016.99 ANIMAL CASTRATION RINGS

Op. 14.02.1992 Dec. 18.06.1992 - TC 9202219

4016.99.00 TRACK, CONTINUOUS, reinforced rubber, having non reinforced

rubber guides

Op. 20.05.2016 Dec. 15.08.2016 - TC 1618497

Tariff Description

===========================================================================


4016.99.00 MACHINE MOUNTS, vibration dampening, metal AND rubber, having

BOTH of the following;

(a) 2 hole flanged metal mounting base;

(b) metal plate with a single internal threaded connection

Op. 10.06.2016 Dec. 29.08.2016 - TC 1620390

4016.99.00 PARTS, PAPER SIZE SORTING MACHINE, being rubber star shaped

wheels

Op. 30.10.2015 Dec. 01.02.2016 - TC 1540579

4016.99.00 STOPPERS, MEDICAL INFUSION BOTTLE, rubber

Op. 19.06.2015 Dec. 07.09.2015 - TC 1522233

4016.99.00 PROTECTORS, BOOT LIP AND/OR BUMPER, AUTOMOTIVE

Op. 21.10.2013 Dec. 06.01.2014 - TC 1335123

4016.99.00 BASES, TRAFFIC CONE OR BOLLARD, rubber

Op. 19.11.2014 Dec. 02.02.2015 - TC 1440761

4016.99.00 PLUGS, CEMENTING, OIL AND GAS WELL

Op. 11.09.2013 Dec. 02.12.2013 - TC 1331198

4016.99.00 PARTS, EXTRUDER, being EITHER of the following:

(a) shock absorber;

(b) shock absorber plate

Op. 09.09.2013 Dec. 25.11.2013 - TC 1330500

4016.99.00 PARTS, TRAM WHEEL, being rubber cushion rings

Op. 28.06.2013 Dec. 16.09.2013 - TC 1321930

4016.99.00 ANNULAR PACKING SUBASSEMBLIES, BLOWOUT PREVENTER, OIL AND/OR

GAS PRODUCTION, consisting of nitrile rubber packer AND donut on

a steel frame

Op. 03.06.2013 Dec. 26.08.2013 - TC 1318098

4016.99.00 PANELS, RAIL LEVEL CROSSING, rubber encased, having ALL of the

following:

(a) steel tie rods;

(b) textile fibre reinforced;

(c) corundum grit embedded surface;

(d) thickness NOT less than 180 mm and NOT greater than 300 mm

Op. 12.04.2013 Dec. 15.07.2013 - TC 1312566

4016.99.00 PLUGS, CEMENTING, OIL OR GAS OR WATER WELL BORE, rubber, having

a plastic core

Op. 23.02.2012 Dec. 14.05.2012 - TC 1206128

4016.99.00 PLUGS, SINK AND/OR BATH, rubber base with metal top, having a

diameter NOT less than 40 mm and NOT greater than 50 mm

Op. 18.02.2010 Dec. 30.04.2010 - TC 1008752

4016.99.00 REFILLS, RUBBER, WIPER BLADE, MOTOR VEHICLE

Op. 07.01.2010 Dec. 07.04.2010 - TC 1001035

4016.99.00 PLUNGERS, CLEARING, SINK OR BATH OUTLET, rubber

Op. 01.10.2009 Dec. 30.12.2009 - TC 0937100

4016.99.00 PADS, POWER TOOLS, circular, rubber

Op. 28.09.2009 Dec. 11.12.2009 - TC 0936637

4016.99.00 PARTS, AERATION SYSTEM, being EITHER of the following:

(a) membranes;

(b) grommets

Tariff Description

===========================================================================


Op. 07.09.2009 Dec. 27.11.2009 - TC 0933136

4016.99.00 SLEEVES, PINCH VALVE

Op. 03.03.2009 Dec. 22.05.2009 - TC 0907331

4016.99.00 PLUGS, SINK AND/OR BATH, rubber

Op. 27.02.2009 Dec. 22.05.2009 - TC 0906870

4016.99.00 PRINTERS BLANKETS

Op. 26.05.2005 Dec. 07.10.2005 - TC 0506245

4016.99.00 BLANKETS, RUBBER, EXTENSIBLE PAPER MAKING

Op. 18.10.2005 Dec. 09.01.2006 - TC 0514729

4016.99.00 BELLOWS, FUME EXHAUST, PICKLE LINE TANK

Op. 24.04.2006 Dec. 14.07.2006 - TC 0607300

4016.99.00 BLOCKS AND/OR PANELS AND/OR SLABS, POLYCHLOROPRENE, having BOTH

of the following:

(a) length NOT less than 190 mm;

(b) width NOT less than 190 mm

Op. 09.01.2007 Dec. 10.04.2007 - TC 0700516

4016.99.00 BALLS, CLEANING, ONLINE CONDENSER, rubber

Op. 22.02.2007 Dec. 18.05.2007 - TC 0702858

4016.99.00 MODULES, SEALING, multidiameter, incorporating a core

Op. 19.12.2007 Dec. 07.03.2008 - TC 0721764

4016.99.00 ELEMENTS, flexible coupling type, interchangeable, styrene-butadiene

compound, shore hardness between 50 and 80 inclusive, providing a

variable torsional stiffness value of 1.733 MNm/RAD to 178.5 MNm/RAD

at nominal torque.

Op. 03.05.1993 Dec. 06.08.1993 - TC 9305504

4016.99.00 OPENERS, rubber, jar

Op. 18.08.1993 Dec. 26.11.1993 - TC 9307458

4016.99.00 STRAPS, luggage, elastic, comprising rubber encased in braided

textile materials with hooks attached

Op. 04.10.1993 Dec. 14.01.1994 - TC 9310810

4016.99.00 NETS, luggage, complete with plastic hooks

Op. 17.11.1993 Dec. 04.03.1994 - TC 9313252

4016.99.00 STRIPPER RUBBERS, having either of the following specifications:

(a) drillpipe, OD 60.33 mm or greater;

(b) a bore of rubber of 53.77 mm or greater but NOT exceeding

98.43 mm

Op. 10.01.1994 Dec. 15.04.1994 - TC 9401247

4016.99.00 PLUG KITS, repair, tubeless tyre

Op. 10.02.1994 Dec. 16.05.1994 - TC 9402215

4016.99.00 ELASTIC MOORING DEVICE, consisting of rubber cable attached to

shackle and thimble with metal clamps

Op. 18.02.1994 Dec. 27.05.1994 - TC 9402316

4016.99.00 MALLET, rubber, with steel handle

Op. 22.02.1994 Dec. 27.05.1994 - TC 9402347

4016.99.00 SUPPORTS, hydraulic accumulator, being rubber seating rings in the

following sizes:

(a) outer diameter: 150, 200 or 250mm;

Tariff Description

===========================================================================


(b) internal diameter: 108, 159 or 200mm;

(c) width of top flat: 15mm

Op. 24.02.1994 Dec. 03.06.1994 - TC 9402429

4016.99.00 PATCHES, pneumatic tyre tube repair, having ALL of the following:

(a) feather edged, size range NOT exceeding 160 sq cm;

(b) incorporating a rubber compound consisting of one layer of

precured rubber bonded to a layer of uncured rubber (bonding

layer);

(c) the uncured rubber (bonding layer) conditioned to cure after

exposure to a chemical accelerator, NOT being hot cure type;

(d) imported separately, or in repair kit form

Op. 01.04.1994 Dec. 08.07.1994 - TC 9403964

4016.99.00 MALLET, rubber, with fibreglass handle

Op. 20.06.1994 Dec. 23.09.1994 - TC 9405259

4016.99.00 PATCH KIT, tyre repair, comprising ALL of the following:

(a) patches;

(b) thumb buffer;

(c) rubber cement

Op. 25.07.1994 Dec. 07.11.1994 - TC 9406336

4016.99.00 PARTS OF VALVES, IRIS DIAPHRAGM, being shut off sleeves of

unhardened vulcanised rubber

Op. 22.11.1994 Dec. 03.03.1995 - TC 9409141

4016.99.00 FITTINGS, moulded (NOT including end caps), capable of withstanding

voltages greater than 1 kV, being ANY of the following:

(a) anti-track fittings;

(b) boots;

(c) cable entry seals

Op. 09.02.1995 Dec. 12.05.1995 - TC 9501533

4016.99.00 PARTS FOR PULSATION DAMPENERS, being EITHER or BOTH of the

following:

(a) bladders;

(b) diaphragms

Op. 10.02.1995 Dec. 15.06.1995 - TC 9501633


before 16 August 1995, or reproductions of these parts, being

ANY of the following:

(a) steering column bellows;

(b) gearshift mechanism bellows;

(c) throttle pedal pads;

(d) brake pedal pads;

(e) clutch pedal pad;

(f) bumper overider grommets;

(g) cross member support pad;

(h) battery seating pad;

(i) gearbox cover plug;

(j) oil pump mounting pad;

(k) fuel pump mounting pad;

(l) mudflaps;

(m) wiper blades;

(n) suspension rebound stops;

(o) dipstick boots;

(p) track rod end boots;

(q) cabin fume excluders;

(r) lamp boots

Op. 16.08.1995 Dec. 24.11.1995 - TC 9509769

4016.99.00 COVERS, SHOCK ABSORBING, TELEVISION AND VIDEO REMOTE CONTROL OR

Tariff Description

===========================================================================


MOBILE TELEPHONE

Op. 14.02.1996 Dec. 24.05.1996 - TC 9603196

4016.99.00 SPRINGS, AIR, comprising ALL of the following:

(a) non detachable top plate with integral rubberjounce stop and

fittings for attachment of suspension and air supply;

(b) rubber flex member (bellows) attached to the top plate;

(c) non detachable piston either attached to flex member or flex

member attachment,

having ALL of the following:

(i) load range 1 000 kg to 4 500 kg;

(ii) operating pressure 100 kPa to 690 kPa;

(iii) height range 25 cm to 45 cm;

(iv) operating temperature range -19 degrees C to +70 degrees C,

but NOT including rubber flex members (bellows) when imported

separately

Op. 24.10.1996 Dec. 03.01.1997 - TC 9611735

4016.99.00 DIAPHRAGMS, PRESSURE FILTER, rubber, having ALL of the following

specifications:

(a) vulcanised raised edge of 16 mm width and 10 mm thickness

running the full circumference of the diaphragm;

(b) length of 4 140 mm;

(c) width of 1 600 mm;

(d) thickness of 6 mm

Op. 05.12.1996 Dec. 28.02.1997 - TC 9612827


(a) non detachable top plate with fittings for attachment of

suspension and air supply;

(b) rubber flex member (bellows) permanently attached to the top

plate;

(c) non detachable assembly attached to bottom of flex member and

including an integral rubber jounce stop and attachment for

piston assembly;


(i) load range 1 000 kg to 5 500 kg;

(ii) operating pressure 100 kPa to 690 kPa;


Op. 18.12.1996 Dec. 01.04.1997 - TC 9613169

4016.99.00 PARTS, AIR SPRINGS, RAILWAY ROLLINGSTOCK, being rubber bellows

with OR without metal fittings, having a static load capacity of NOT

less than 5 000 kgs

Op. 15.01.1997 Dec. 04.04.1997 - TC 9700448




(b) rubber flex member (bellows) permanently attached to the top

plate;

(c) non detachable assembly attached to bottom of flex member and

including an integral rubber jounce stop and attachment for

piston assembly;

AND having ALL of the following:

(i) load range 1 000 kg OR more but NOT exceeding 5 500 kg;

(ii) operating pressure 0 kPa OR more but NOT exceeding 900 kPa;

(iii) height range 15 cm OR more but NOT exceeding 90 cm

For the purposes of this order, ALL measurements have a tolerance of

plus OR minus 5%

Op. 11.02.1997 Dec. 28.04.1997 - TC 9701260



Tariff Description

===========================================================================


of these parts, being ANY of the following:

(a) steering column bellows;

(b) gearshift mechanism bellows;

(c) throttle pedal pads;

(d) brake pedal pads;

(e) clutch pedal pads;

(f) bumper overider grommets;

(g) cross member support pads;

(h) battery seating pads;

(i) gearbox cover plugs;

(j) oil pump mounting pads;

(k) fuel pump mounting pads;

(l) mudflaps;

(m) wiper blades;

(n) suspension rebound stops;

(o) dipstick boots;

(p) track rod end boots;

(q) cabin fume excluders;

(r) lamp boots

Op. 10.04.1997 Dec. 20.06.1997 - TC 9702553

4016.99.00 SPRINGS, AIR, having ALL of the following:


suspensions and air supply;

(b) rubber flex member (bellows) permanently attached to the

top plate;

(c) non detachable assembly attached to the bottom of the flex

member and including an integral rubber jounce stop and

attachment for piston assembly;

(d) load range of 100 kg OR more but NOT exceeding 5 500 kg;

(e) operating pressure between zero kPa and 900 kPa;

(f) height range 15 cm OR more but NOT exceeding 90 cm

For the purposes of this order, ALL measurements have a tolerance of

+ or - 5%

Op. 15.04.1997 Dec. 27.06.1997 - TC 9702938

4016.99.00 CLOSURES ELASTOMERIC, PARENTAREL SOLUTION complying with Sec. 3.2.9

of the European Pharmacopoeia (3rd Ed) and registered under the

requirements of the Australian Therapeutic Goods Act 1989

(as amended)

Op. 23.06.1997 Dec. 08.09.1997 - TC 9705434

4016.99.00 AIR SPRING SUSPENSION ASSEMBLIES, MOTOR VEHICLE, put up in kits

having ALL of the components listed in Table A and having BOTH of

the ratings when assembled listed in Table B:

TABLE A

(a) rubber air springs (bellows) with crimped metal end plates;

(b) metal mounting brackets;

(c) self locking fasteners;

(d) spacers;

(e) inflation valves;

(f) air line tubing;

(g) push to connect air fittings;

TABLE B

(a) load carrying capacity per wheel of NOT less than 250 kg and

NOT greater than 2 000 kg;

(b) maximum stroke NOT greater than 175 mm

Op. 08.09.1997 Dec. 14.11.1997 - TC 9707912

4016.99.00 ENVELOPES, TYRE RETREADING

Op. 16.10.1997 Dec. 11.03.1998 - TC 9709216

4016.99.00 TUBES, PINCH VALVE, moulded rubber

Op. 24.10.1997 Dec. 28.01.1998 - TC 9709411

Tariff Description

===========================================================================


4016.99.00 MATTING, RAILWAY BALLAST

Op. 27.10.1997 Dec. 09.01.1998 - TC 9709466

4016.99.00 LINERS, RUBBER, MILKING MACHINE CLUSTER ASSEMBLY

Op. 30.10.1997 Dec. 16.01.1998 - TC 9709618




(b) rubber flex member (bellows) permanently attached to the

top plate;

(c) non detachable piston attached to flex member;


(i) load range 800 kg to 2 650 kg;

(ii) operating pressure range 207 Kpa to 620 Kpa;


(iv) operating temperature - 54 degrees C to 57 degrees C

Op. 29.01.1998 Dec. 15.04.1998 - TC 9800868

4016.99.00 PLUGS, VALVE

Op. 01.05.1998 Dec. 17.07.1998 - TC 9803678

4016.99.00 DIAPHRAGMS, PRESSURE OR CHAMBER FILTER, RUBBER, having a surface

area greater than 1.5 sq m

Op. 04.05.1998 Dec. 17.07.1998 - TC 9803708

4016.99.00 RUBBER TRACK, endless, having ALL the following:

(a) steel reinforcing cores;

(b) self cleaning drafts;

(c) hardened inserts

Op. 07.05.1998 Dec. 17.07.1998 - TC 9803949

4016.99.00 SPRINGS, AIR, having ALL of the following:

(a) reinforced flex member (bellows) with end closures of crimped

metal bead plates OR metal bead rings;

(b) load range of NOT less than 1 kN but NOT exceeding 48 kN;

(c) operating pressure of NOT less than 1 bar but NOT exceeding

8 bar;

(d) stroke of NOT less than 50 mm but NOT exceeding 500 mm

Op. 13.05.1998 Dec. 24.07.1998 - TC 9804065

4016.99.00 CORDS, RUBBER, MOORING, WAVE RECORDING BUOY

Op. 11.11.1998 Dec. 22.01.1999 - TC 9809999

4016.99.00 TOYS, DOG OR CAT, being ANY of the following:

(a) squeaker;

(b) tugging;

(c) chew and fetch;

(d) dumbbell;

(e) ball;

(f) bone

Op. 15.09.1998 Dec. 26.02.1999 - TC 9810644

4016.99.00 TYRE INSERTS, being BOTH of the following:

(a) beadlocks;

(b) runflats

Op. 20.04.1999 Dec. 02.07.1999 - TC 9902755

4016.99.00 SEXUAL AIDS, being EITHER of the following:

(a) artificial sexual organs OR representations thereof;

(b) stimulators

Op. 27.07.2000 Dec. 23.10.2000 - TC 0006671

Tariff Description

===========================================================================


4016.99.00 TRACTOR TRACK, endless

Op. 17.11.2000 Dec. 29.01.2001 - TC 0009530

4016.99.00 HORTICULTURAL TIES, biodegradable natural rubber

Op. 18.12.2000 Dec. 09.03.2001 - TC 0010220

4016.99.00 TOYS, PET

Op. 05.09.2002 Dec. 03.12.2002 - TC 0208157

4016.99.00 RUBBER PANELS, having a thickness NOT less than 180 mm and NOT

greater than 225 mm

Op. 07.10.2003 Dec. 02.01.2004 - TC 0312599

4017.00 PACKING STRIPS, suction roll

Op. 05.08.1992 Dec. 01.02.1993 - TC 9207202

tariff description description ===== item 50 applies unless otherwise stated

Documents