taylor catalog
TRANSCRIPT
TAYLOR
Liquid Level FloatGauges
1
Junior Gauge
Senior Gauge
TAYLOR
Junior and Senior Domestic Tank Gauges
Float gauges are designed to indicate the liquid level contents ofLP-Gas containers. These gauges mount in a junior or a seniorflanged coupling. Gauges can be top, side or angle mounted forabove ground or below ground containers.
Standard Stock Sizes
Junior Gauges (H=1/2")
Item Number Part Number Tank Diameter Mounting
130299 JA124I 24" Top
130305 JA154I 30" Top
130310 JA192J 37" Top
130315 JA206I 41" Top
130301 JC124B 24" 45° Angle
130303 JC154B 30" 45° Angle
130307 JC190B 37" 45° Angle
130312 JC210B 41" 45° Angle
130316 JD080A 24" Side, End
130318 JD100F 30" Side, End
130320 JD120D 37" Side, End
130322 JD140C 41" Side, End
Senior Gauges (H=1")
Item Number Part Number Tank Diameter Mounting
130324 SA130A 24" Top
130326 SA160A 30" Top
130328 SA194A 37" Top
130330 SA214A 41" Top
130332 SC130B 24" 45° Angle
130334 SC160A 30" 45° Angle
130336 SC194D 37" 45° Angle
130338 SC214C 41" 45° Angle
130340 SD080D 24" Side, End
130342 SD100C 30" Side, End
130344 SD120G 37" Side, End
130346 SD140A 41" Side, End
2
3/4" Threaded Brass Gauge
1 1/4" Threaded Brass gauge
1" Threaded Brass Gauge
Liquid Level Gauges
Threaded Brass Domestic Tank Gauges
Float gauges are designed to indicate the liquid level contents ofLP-Gas containers. These gauges mount in a 3/4", 1" or 1 1/4" tankcoupling. The 3/4" and 1" gauges are for only top mountapplications. The 1 1/4" gauges are for top, side or angle mountapplications. These threaded Brass gauges are only foraboveground tanks.
Standard Stock Sizes
3/4" Threaded Brass Gauges (H=1")
Item Number Part Number Tank Diameter Mounting
131640 UA130A 24" Top
131645 UA160A 30" Top
131650 UA194A 37" Top
131655 UA210A 41" Top
1" Threaded Brass Gauge (H=1")
Item Number Part Number Tank Diameter Mounting
131589 HA130ARN 24" Top
131590 HA156ARN 30" Top
131592 HA160ARN 30" Top
131594 HA162ARN 31.5" Top
131595 HA194ARN 37" Top
131661 HA210ARN 41" Top
1 1/4" Threaded Brass Gauge (H=1")
Item Number Part Number Tank Diameter Mounting
131600 TA130A 24" Top
131604 TA156A 30" Top
131605 TA160A 30" Top
131609 TA164A 32" Top
131610 TA194A 37" Top
131615 TA210A 41" Top
3
Junior Gauge
Junior Side or End Mount
Junior 45° Angle Mount
TAYLORJunior and Threaded Vertical Cylinder Gauges
Float gauges are designed to indicate the liquid level contents ofLP-Gas containers. These gauges mount in a junior adaptor or a1" or 1 1/4" tank coupling.
Standard Stock Sizes
Item Number Part Number Cylinder Size Head
131545 JA176B 200 LBJunior
131540 JA250J 420 LB
131608 HA180A 200 LB1" MNPT
131619 HA254J 420 LB
131611 TA180A 200 LB1 1/4" MNPT
131616 TA254S 420 LB
Junior and Senior Motor Fuel Tank Gauges
Float gauges are designed to indicate the liquid level contents ofLP-Gas containers. These gauges mount in a Junior or Senioradapters. Gauges can be top, side or angle mounted. Standard directread dials are installed, with remote sending units available.
Standard Stock Sizes
Junior Gauges (H= -1/2)
Item Number Part Number Tank Diameter Mounting
130247 10CC 10" Side, End
130248 12CC 12" Side, End
130250 14CC 14" Side, End
130251 16CC 16" Side, End
130252 18CC 18" Side, End
130253 20CC 20" Side, End
130254 22CC 22" Side, End
130255 24CC 24" Side, End
130249 12AC 12" 45° Angle
130256 14AC 14" 45° Angle
130257 16AC 16" 45° Angle
130258 18AC 18" 45° Angle
130259 20AC 20" 45° Angle
130260 22AC 22" 45° Angle
130261 24AC 24" 45° Angle
4
TU160B
Horizontal PositionMeasures 0 - 40 % Full *
Vertical PositionMeasures 0 - 20 % Full *
Liquid Level Gauges
Junior and Threaded Lift Truck Gauges
Float gauges are designed to indicate the liquid level contents of LP-Gas containers. Choose a gauge to measure your lift truck cylinder ina vertical, horizontal or both positions. These gauges are availablewith Junior, 3/4" or 11/4" brass threaded heads.
Standard Stock Sizes
Universal Mount
Item Number Part Number Cylinder Size Head
131506 JU086B
20 LB
Junior
131507 UU086B 3/4" MNPT
131520 TU086B 1 1/4" MNPT
131512 JU160B
33 LB
Junior
131513 UU160B 3/4" MNPT
131530 TU160B 1 1/4" MNPT
131516 JU212A
43 LB
Junior
131517 UU212A 3/4" MNPT
131535 TU212A 1 1/4" MNPT
Vertical Mount
Item Number Part Number Cylinder Size Head
131510 JA086A 20 LB
Junior131514 JA166A 33 LB
131518 JA216A 43 LB
Horizontal Mount
Item Number Part Number Cylinder Size Head
131508 JD060A20,33,43 LB
Junior
131525 TD060A 1 1/4" MNPT
Universal Gauge
* Example is for 33 LB cylinder
5
Junior Gauge
Senior Gauge
TAYLOR
Junior and Senior Anhydrous Ammonia Gauges
Float gauges are designed to indicate the liquid level contents ofanhydrous ammonia containers. These gauges mount in a Junior orSenior adapters. Gauges can be top, side or angle mounted.
Standard Stock Sizes
Junior Gauges (H= 1/2")
Item Number Part Number Tank Diameter Mounting
130400 BA124A 24" Top
130402 BA154A 30" Top
130403 BA214B 41" Top
130410 BC124A 24" 45°Angle
130420 BD080A 24" Side, End
Senior Gauges (H=1")
Item Number Part Number Tank Diameter Mounting
130430 AA130A 24" Top
130432 AA160A 30" Top
130434 AA194A 37" Top
130436 AA214E 41" Top
290000 A6480-13 * 41" Top
130438 AA240A 46" Top
290001 A6480-12 * 46" Top
130439 AA250A 48" Top
130440 AC130A 24" 45°Angle
130442 AC160A 30" 45°Angle
130444 AC194A 37" 45°Angle
130446 AC214B 41" 45°Angle
130448 AC240A 46" 45°Angle
130450 AD080B 24" Side, End
130452 AD100D 30" Side, End
130454 AD120E 37" Side, End
130456 AD140A 41" Side, End
130458 AD150A 46" Side, End
130459 AD160J 48" Side, End
* All stainless steel construction
6
Liquid Level Gauges
Visible “4" Float Gauges
Visible “4" float gauges are designed to indicate the liquid levelcontents of LP-Gas and Anhydrous Ammonia containers. Thesegauges mount in a senior gauge adaptor. Gauges can be top, sideor angle mount for above ground containers up through 96" tankdiameter.
Master Model A and B Gauges
Visible “4" float gauges are designed to indicate the liquid levelcontents of LP-Gas and Anhydrous Ammonia storage containers.Both the model A and model B master gauges feature a large 10"dual service dial face with a chrome retainer.
Model A - Standard construction gauge which mounts directly toa 2" MNPT x Senior adaptor with a teflon gasket. Gauges can betop or end mounted.
Model B - Heavy duty construction gauge which mounts directlyto a 2 ½" MNPT x 8-Bolt flange adaptor with a stainless steelspiral wound gasket. Gauges can be top or end mounted.
Standard Stock Sizes
TankDiameter
TankOpening
ModelType
ItemNumber
PartNumber
72"2" A 138000 ME2434A
2 1/2" B 138005 ME2434B
82"2" A 138010 ME2738A
2 1/2" B 138015 ME2738B
84"2" A 138020 ME2839A
2 1/2" B 138025 ME2839B
96"2" A 138030 ME3245A
2 1/2" B 138035 ME3245B
104" to 108"2" A 138040 ME3650A
2 1/2" B 138045 ME3650B
130"2" A 138050 ME3862A
2 1/2" B 138055 ME3862B
7
TAYLOR
“Roadmaster” Gauges for Mobile Applications
Uniquely designed to withstand the tough-shock and vibrationassociated with mobile service of LP-Gas and AnhydrousAmmonia. These gauge mount in a standard 8-bolt flange.Applicable to end or side mounting. Standard and easily replaceable“4" easy viewing dial.
Standard Stock Sizes
Tank Diameter Item Number Part Number
72" 131833 RM1833
74" 131834 RM1834
79" 131836 RM1836
84" 131838 RM2438
8
136521 Digital Receiver
Sensor
136619 Monitor
Liquid Level Gauges
Senders and Receivers for Motor fuel Service
Squibb-Taylor’s sender gives both direct and remote indication of LP-gasliquid level on all makes of cars and trucks when used with either a receiver,furnished by Squibb-Taylor, or the original equipment fuel gauge on thevehicle. The sender also works on all recreational vehicles .
Squibb-Taylor’s 0-90 ohm receivers are available with either an analog ordigital display. Receivers can be mounted at the dash or other remotelocations.
Part Number Ohms Application Description
136600 0 - 90 GM & RV’s Sender
136601 70 - 10 Old Ford & Chrysler Sender
136602 15 - 160 New Ford Sender
136607 110 - 10 New Chrysler Sender
136609 95 - 5 New Dodge Sender
136536 40 - 250 New GM Sender
136613 220 - 20 Dodge 2000 Sender
136650 0 - 90 GM & RV’s Sender & 18' Cable
136651 70 - 10 Old Ford & Chrysler Sender & 18' Cable
136652 15 - 160 New Ford Sender & 18' Cable
136657 110 - 10 New Chrysler Sender & 18' Cable
136659 95 - 5 New Dodge Sender & 18' Cable
136520 0 - 90 Receiver Analog Display
136521 0 - 90 Receiver Digital Display
136605 0 - 90 Sender, Analog Receiver & 20' Cable
136606 0 - 90 Sender, Digital Receiver & 20' Cable
Stationary Tank Monitor
The Monitor remotely indicates the liquid level of LP-gas in a stationarystorage tank. It consists of two parts - a sensor installed at the tank and amonitor placed at a remote location. Liquid level indication on the monitoris given by a multicolor bar graph. The sensor fits directly on Taylor orRochester Jr. float gauges and connects to the monitor with outside gradetwo conductor 22/24 gauge cable.
Low/normal level alarm indication is given by red and green LEDs.
Resettable alarm buzzer triggers when low level is sensed.
Adjustable alarm level can be preset anywhere between 0% and 99%.
Two DPDT dry alarm contacts available for other uses.
AC/DC operation with a 120 VAC wall plug-in adaptor included.
Interfaces with RTUs or programmable controllers.
DescriptionPart
Number Includes*
Monitor & Sensor forremote readout at one
stationary tank.136619
Digital bar graph, low levelindicator light, pre-settablealarm level, low level audio
buzzer with reset button* Optional: Relay dry contact output. NO/NC, 1 amp.
9
136618 Monitor
TAYLORTank Monitors for Residential and Small Commercial Applications
The system consists of two components - a sensor installed at the propanetank and a monitor placed at a remote location. Propane level in the tank isdisplayed by the monitor on the bar graph.
Intended for residences using either aboveground or underground storagetanks. Also can be installed at restaurants, Laundromats, car washes, andother small commercial/industrial applications.
Gives visual indication (multi-colored bar graph) of propane level in thetank.
Two versions available - 120VAC operation (transformer included) forcontinuous liquid level indication or 9 VDC battery operation with "ondemand" (push-button) liquid level indication.
Extremely compact, easy to install.
Sensor fits all Taylor and other competitive float gauges, tank modificationsare unnecessary to make installation.
Part Number Description
136617 Sensor and 9 Volt Battery Monitor
136618 Sensor and 120 VAC Monitor
Taylor Gauge Screws, Gaskets and Dials
Part Number Description
130118 Junior Gauge Screw
130119 Senior Gauge Screw
130219 Master Gauge Bolt
130121 Junior Gauge Gasket - Buna-N
130122 Senior Gauge Gasket - Buna-N
130130 Senior Gauge Gasket - Teflon
130040 Master & Roadmaster Spirotallic Gasket
130020 Visible “4" LP-Gas Dial
130025 Visible “4" NH3 Dial
130035 Master Gauge Dial
131839 Roadmaster Dial
10
Style BLarge dia. Locator pin hole on back of dial in this location
Jr- 1 1/4" Brass
130021
R3D- Jr Hall Compatible
130022, 130023, 130024 & 130028
2701 5TR Style - R indicates partially red face dial. Red area indicates low fuel.
130012, 130009, 130011 & 130026
Style ALarge dia. Locator pin hole on back of dial in this location
Liquid Level Gauges
Taylor Gauge Replacement Dials
Part Number Used On Notes
130005 (2201) Glue-on replacement for any Taylor Jr crimped-in dial. Will work on any Jr gauge
130010 (2201) Glue-on replacement for any Taylor Sr crimped-in dial. Will work on any Sr gauge
130012 (2701) Used in all standard above ground system tank gauges: Jr, 1" or 1 1/4" (pre-2002)Used in any Jr or Sr end, side or angle gauges which are not crimped-in type.
Guide hole in back of dial at 95% - Style A
130009 (2701) Used in any Jr or Sr top mount gauges which are not the crimped-in type or standardabove ground system tanks.
Guide hole in back of dial at 5% - Style B
130011 (2700) Used in underground tanks: Trinity , American Welding & Thompson Guide hole in back of dial at 95% - Style A
130026 (2700) Used on underground tanks: Quality & Chemi-Trol Guide hole in back of dial at 5% - Style B
130022 (5-2767) Remote ready dial used in all standard above ground system tank gauges: Jr, 1" or 1 1/4"(pre-2002). Used in any Jr or Sr end, side or angle gauges which are not crimped-in type.
Guide hole in back of dial at E - Style A
130023 (5-2768) Remote ready dial used on any Jr or Sr top mount gauge which is not the crimped-in typeor standard above ground system tanks.
Guide hole in back of dial at 30% - Style B
130024 (5-2876) Remote ready dial used in underground tanks: Trinity , American Welding & Thompson Guide hole in back of dial at E - Style A
130028 (5-2824) Remote ready dial used on underground tanks: Quality & Chemi-Trol Guide hole in back of dial at 30% - Style B
130021 (2701) Used on any 1 1/4" (post 2002) gauge. Same as Rochester Jr dial
11
TAYLOR
Information Needed With Gauge Orders
Simply order Taylor Gauges by the gauge code and an exact duplicateof the gauge from which the code was taken will be delivered. AllTaylor Gauges produced since 1964 have the gauge code stamped onthe head.
If gauge code is not available, specify the following information.
1. Type of Service: LP-Gas, Anhydrous Ammonia or other materials
2. Gauge Size (Head Size): Specify Junior, Senior, Brass Threaded (3/4", 1" or 1 1/4"), Master Model A or B or Roadmaster.
3. Type Mounting: Top, Side, End or Angle (if angle, specify angle above horizontal centerline)
4. Give Following Dimensions: H - Distance from outside of container to base of gauge headD - Inside diameter of container
For vertical cylinders:X - Distance from center of gauge adaptor to nearest inside wallO - Cylinder height
5. Dial Number of old gauge.