tbv™ cryogenic ball valves - wegman - tbv cryogene ball valve brochure.pdf · bechtel...
TRANSCRIPT
PROCESS VALVES
TBV™
Supplying the needs of the cryogenic market since 1978, TBV™ continues to
offer its customers new and improved products for cold service.
TBV™ Cryogenic Ball Valves
TBV™
PROCESS VALVES
PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™ 3
TBV™ Cryogenic Ball Valves
Overview ........................................................................................ 4
Technical Summary ......................................................................... 6
TBV Cryogenic Ball Valves Chart ...................................................... 7
Overall Valves Features .......................................................................... 8
Torque Curves Charts ........................................................................... 13
Series 21/11 .......................................................................................... 14
Series 21/51 .......................................................................................... 15
Series 21/51A ....................................................................................... 16
Series 21/31 .......................................................................................... 17
Series 21/18 .......................................................................................... 18
Series 21/20 .......................................................................................... 19
Series 21/28 .......................................................................................... 20
Series 21/80 .......................................................................................... 21
Aftermarket Services ............................................................................. 22
Trademark Information ......................................................................... 23
TABLE OF CONTENTS
PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™4
Cameron’s Valves & Measurement (V&M) group is a leading provider of valves
and measurement systems to the Oil and Gas industry. The group’s products are
primarily used to control, direct and measure the flow of oil and gas as it is moved
from individual wellheads through flow lines, gathering lines and transmission
systems to refineries, petrochemical plants and industrial centers for processing.
The Process Valves division provides critical service valves for refinery, chemical and
petrochemical processing businesses and for associated storage terminal
applications, particularly through the OrBIT® and GenerAL VALVe® product lines.
OrBIT and GenerAL VALVe lines are complimented by WKM® and TBV™ valve
products and expand the scope of this division’s product offerings.
TBV valve products are manufactured and assembled at Cameron’s new facility in
Millbury, Massachusetts. The TBV facility offers 100,000 ft2 of space of which
80,000 ft2 is dedicated to manufacturing, assembling, testing, shipping, and quality
assurance. The increased manufacturing space has afforded Cameron the
opportunity to expand its product offering and size ranges. TBV is now competitive
in the LnG, mining and petrochemical markets with its ability to offer larger size
ranges in its line of products.
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™ 5
TBV™ FAMILY OF CRYOGENIC PRODUCTSTechnical Summary
SIZE RANGE ½” THrOUGH 16”Dn15 THrOUGH Dn400
PORTING CONFIGURATIONS STAnDArD POrT and FULL POrT
APPLICATIONS • Air Separation• Liquefied natural Gas (LnG)• Liquefied Petroleum Gas (LPG) • Pharmaceutical (blanketing, ph control, pipe freezing, process chilling, water treatment, shrink fitting)• Transport (Trailers)• Steel Mills • High Purity Gases For electronic Applications• Food Freezing • Aerospace
SERVICES Ammonia (-28ºF / -33ºC)Argon (- 303ºF / -186ºC) Carbon Dioxide (-109 ºF / -78ºC)Carbon Monoxide (- 312ºF) Chlorine (-30ºF / -34ºC)Deuterium (- 417ºF) ethylene (-155ºF / -104ºC)Fluorine (- 307ºF / -188ºC) Freon (-18 ºF / -28ºC)
Helium (- 452ºF/-269ºC) Hydrogen (- 423ºF/-253ºC) Krypton (- 244ºF) Methane (- 259ºF/-162ºC) neon (- 410ºF/-246ºC) nitric Oxide (- 241ºF)nitrogen (- 320ºF/-196ºC) Oxygen (- 297ºF/-183ºC) Propane (-44ºF/-42ºC)
PRESSURE RANGE VACUUM THrOUGH ASMe 900
TEMPERATURE RANGE -452ºF / -269ºC to 500ºF / 260ºC
MATERIALSAll materials
used are fully traceable
316 / 316L Stainless Steel
MonelBrass
ASTM A351 CF3M - CastingASTM A182 F316L - Forging ASTM A276 or A479 316L - BarASTM B164ASTM B584
END CONNECTIONS FlangedSocket WeldButt Weld
extended Welded endsThreaded
SPECIFICATIONS ASMe B1.20.1ASMe 16.10ASMe B16.11ASMe B16.25ASMe B16.34ASMe B31.3ASMe 16.5MSS SP25MSS SP61BS6364API 607 4TH ed and API 607 5th edBechtel 3PS-PV00-F0001Chevron Low Temp & Cryo Service Testing
nPT Pipe ThreadsFace to Face DimensionsSocket Weld ends (diameter & depth)Butt Weld endsSteel Valves (performance & design)Process Piping (application)Pipe Flanges & FittingsValve MarkingPressure TestingBritish Standard Cryo Leak Test Std.Fire Safe to AtmosphereLow Temp & Cryo Service TestingLow Temp & Cryo Service Testing
OPERATION OH – Oval HandleLH – Lever HandleLG – Locking Gear Operator
AP – Prepared for ActuationAI – Actuator Installed90° and 180° rotation
CRYOGENIC TESTING BSI BS 6364Bechtel 3PS-PV-F001Chevron Low Temp & Cryo Testing
PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™6
TBV™ FAMILY OF CRYOGENIC PRODUCTSTBV™ Cryogenic Ball Valves
Port ASME Rating End Connections Materials
Full
Port
Stan
dard
Por
t
150
300
600
900
1500 rF rTJ
BW SW
Thre
ad
316L
SS /
316S
S
Mon
el
Bras
s
Model Size Range Description
Series 21/11 1/4” to 8” 3-piece cryogenic ball valve, floating • • • • • • • • • • •
Series 21/18 1/2” to 12”Split body, 2-piece, flanged, standard or full port cryogenic ball valve, floating
• • • • • • • • • • • •
Series 21/20 1/2” to 8”Standard port, end-entry (unibody), flanged cryogenic ball valve, floating
• • • • • • •
Series 21/28 1/2” to 8”Full port, split body, flanged, cryogenic ball valve
• • • • • • •
Series 21/31 1/2” to 3”3-piece cryogenic ball valve, floating (installed between existing flanges)
• • • • • • • •
Series 21/51 1/2” to 8”3-piece cryogenic diverter ball valve, floating
• • • • • • • • • • •
Series 21/51A 1” to 2”High flow cryogenic safety relief valve, floating
Consult Factory
600 psi • • • •
Series 21/80 8” to 16”Large bore, split body, cryogenic ball valve, trunnion
• • • • • • •
Facility Features
• Clean room for oxygen, chlorine and
phosgene assembly and testing
• Painting room
• Dedicated cryogenic testing area
• State of the art CnC machining
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™ 7
Stem Seal
The leak-proof integrity of the valve is further enhanced
by a welded bonnet design and Chevron V-ring packing
that can be adjusted by a simple turn of the stem nut.
Leak-free stem sealing is provided by the rings of PTFe
V-ring or graphoil packing that sit on a shoulder
machined on the blowout-proof stem, allowing the
packing and stem to move as a unit during thermal
cycles. In addition, the packing is live-loaded, retained by
self compensating belleville spring washers and a
packing adjustment nut. These features coupled with
close tolerance machining and finish of the packing
bore, provide maximum stem seal life with the minimum
maintenance.
TBV™ FAMILY OF CRYOGENIC PRODUCTSOverall Valve Features
Blow-out Proof One Piece Stem
The TBV™ brand of cryogenic valves utilize a one-piece stem that engages the ball and is secured in the valve cavity with
a large threaded stem collar that is set screwed for safety.
Firesafe Design
Firelip
PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™8
Cavity Pressure relief
TBV has numerous options in handling cavity pressure relief. Depending upon whether unidirectional or bidirectional flow
is required as well as the type of valve configuration, we have the options listed below.
OPTION 1: UnIDIreCTIOnAL reLIeF, AVAILABLe On 3-PIeCe VALVeS (center section with two end plates). This photo
shows a slot in the upstream end plate which provides the cavity pressure relief. The seat sits on the raised face surface.
When the ball is in the closed position, internal cavity pressure relieves around the O.D. of the seat and through the slot and
then to the upstream pipe.
Flow Direction
Where there is unidirectional flow, flow arrows are located on the valve in three areas so that there is no doubt how the
flow needs to go through the valve:
• Bottom boss of center section
• Top plate of the cryo extension
• Stainless steel tag on body
TBV™ FAMILY OF CRYOGENIC PRODUCTS (Cont.)Overall Valve Features
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™ 9
OPTION 2: UnIDIreCTIOnAL reLIeF, AVAILABLe On FLAnGeD VALVeS, upstream relief hole in ball.
30°
OPTION 3: BIDIreCTIOnAL FLOW, cavity pressure relieving seats are also available.
Inclination Limitations
It is recommended that TBV™ valves be installed with extended Bonnet within 30° of true vertical. Valves with
graphite packing can be oriented in any direction.
PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™10
Cleaning Procedures
• In accordance with Praxair GS 38
• Clean room environment only
• All components to be detergent washed and rinsed
• White and ultraviolet light visual inspection to detect
lint, oils, and greases
• Inaccessible surfaces to be cleaned using wipe
method
• All oxygen and cryogenic valves are assembled dry
• Valves to be double bagged and sealed in 2 ply
polyethylene bag
CRYO SEAT RATING CHART
-452ºF-269ºC
CRYOFILKEL-F
ULTRAFILClass 300
Class 150
Seats
TBV valves can use Cryofil, Kel-F or Ultrafil seats, specifically designed to provide leak-proof operation down to
-452°F / -269°C.
TBV™ FAMILY OF CRYOGENIC PRODUCTS (Cont.)Overall Valve Features
-500 -400 -300 -200 -100 0 100 200 300 400 500
-296 -140 -184 -129 -73 -18 38 93 149 204 260
4000 276
3500 241
3000 207
2500 172
2000 138
1500 103
1000 69
500 34
0 0
psig BAR
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™ 11
Cryogenic Boiling Points at 1 ATM
-18ºC 0ºF
-46ºC -50ºF
-73ºC -100ºF
-101ºC -150ºF
-129ºC -200ºF
-157ºC -250ºF
-184ºC -300ºF
-212ºC -350ºF
-240ºC -400ºF
-268ºC -450ºF
Freon (-18ºF -28ºC)Ammonia (-28ºF -33ºC)
Propane (-44ºF -42ºC)
Carbon Dioxide (-109ºF -78ºC)
ethylene (-155ºF -104ºC)
Methane (-259ºF -162ºC)
Oxygen (-297ºF -183ºC)
Fluorine (-307ºF -188ºC)nitrogen (-320ºF -196ºC)
neon (-411ºF -246ºC)Hydrogen (-423ºF -253ºC)
Helium (-452ºF -269ºC)Absolute Zero (-459ºF -273ºC)
Argon (-303ºF -186ºC)
Chlorine (-30ºF -34ºC)
PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™12
TBV™ FAMILY OF CRYOGENIC PRODUCTSTorque Curves
1/2"3/4"
1"
1-1/2"2"
3"
4"
6"
8"
10
100
1,000
10,000
100,000
0 300 600 900 1,200 1,500
Torq
ue (i
n-lb
s.)
Differential Pressure (PSI)
10,000
100,000
1,000,000
0 300 600 900 1,200 1,500
Torq
ue (i
n-lb
s.)
Differential Pressure (PSI)
10"150
10"600
10"30012"150
12"300
12"600
16"600
16"300
16"15014"300
50,000
5,000
500
50
500,000
50,000
PCTFE (Kel-F) 1/2" through 8", Standard Port
PCTFE (Kel-F) 10" through 16", Full Port
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™ 13
3-Piece, Cast & Barstock Cryogenic Ball Valve
SIZE RANGE 1/4” - 8”
PRESSURE RANGE ASMe 600 - 1500
END CONNECTIONS raised face end plates for positive component alignment and elimination of radial pipe stresses. Socket, Butt Weld or Threaded.
STANDARD CAVITY PRESSURE RELIEF
METHOD
Upstream end plate slot or cavity pressure relieving seats (for bi-directionality).
BALL / SEAT CONFIGURATION
Floating ball
BODY SEAL DESIGN
Totally encapsulated body seals to prevent cold flow of PTFe. High performance over wide temperature and pressure range. Spiral wound body seals above ASMe 600.
CASTING TYPE Investment cast or sand cast; size and pressure class dependant.
UNIQUE FEATURE Versatile design with numerous end connection availability.
BILL OF MATERIAL PART ITEM
BODY A
enD PLATeS B
BALL C
STeM D
FOLLOWer e
SeATS F
STeM SeALS G
BODY SeALS H
STOP I
STeM nUTS J
HAnDLe K
THrUST BeArInG L
BODY BOLTS M
BODY nUTS with LOCK WASHerS n
LOCK WASHer O
STeM COLLAr P
SeT SCreW FOr COLLAr Q
STeM SeAL WASHer r
STeM BeLLeVILLe SPrInGS S
STOP PInS / BOLTS T
SERIES 21/11
JO KJ
I
E
G
R
D
LP
S
T
BHFC
AFH
B
N
Q
M
PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™14
SERIES 21/51
SIZE RANGE 1/2” - 8”
PRESSURE RANGE ASMe 600 - 1500
END CONNECTIONS raised face end plates for positive component alignment and elimination of radial pipe stresses. Socket, Butt Weld or Threaded.
STANDARD CAVITY PRESSURE RELIEF
METHOD
Does not apply because flow is diverted at all times.
BALL / SEAT CONFIGURATION
Floating ball
BODY SEALS Totally encapsulated body seals to prevent cold flow of PTFe. High performance over wide temperature and pressure range. Spiral wound body seals ASMe 600 and above.
CASTING TYPE Investment cast or sand cast; size and pressure class dependant.
UNIQUE FEATURE Available in two porting arrangements: 90° and 180° operation. The 90° operation allows flow from a bottom port to be diverted to either of two outlet ports over 90° turn of the handle, but never shutting off. The 180° operation also diverts from the bottom port to the outlet ports, but uses a 180° turn of the handle, allowing flow to be completely shut off at the 90° position.
BILL OF MATERIAL PART ITEMBODY A
enD PLATeS B
BALL C
STeM D
FOLLOWer e
SeATS F
STeM SeALS G
BODY SeALS H
STOP I
HAnDLe J
THrUST BeArInG K
BODY BOLTS L
BODY nUTS with LOCK WASHerS M
STeM nUTS n
LOCK WASHer O
STeM COLLAr P
SeT SCreW FOr COLLAr Q
STeM SeAL WASHer r
STeM BeLLeVILLe SPrInGS S
STOP PInS / BOLTS T
3-Piece, Diverting Cast & Barstock Cryogenic Diverter Ball Valve
NO J
NI
E
GR
D
KP
S
T
M
BH
AF
CF
HB
L
Q
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™ 15
SERIES 21/51A
SIZE RANGE 1” Std. port1” Full port1 - 1/2” Full port
PRESSURE RANGE 600 psi
END CONNECTIONS Smooth transition, high flow end plates. Male and female threaded connections.
STANDARD CAVITY PRESSURE RELIEF
METHOD
Symmetrical valve for dual relief. each side has redundant safety relief with both a rupture disc and safety relief valve.
BALL / SEAT CONFIGURATION
Floating ball
BODY SEAL DESIGN
Totally encapsulated body seals to prevent cold flow of PTFe. High performance over wide temperature and pressure range.
CASTING TYPE Investment body, sand cast ends
UNIQUE FEATURE High Flow Capacity protects vessels from over pressurization. Consistently high flow ensures safe operation. Tanks are protected even during operation of the valve.
BILL OF MATERIAL PART ITEM
BODY A
enD PLATeS B
BALL C
STeM D
FOLLOWer e
SeATS F
STeM SeALS G
BODY SeALS H
STOP I
HAnDLe J
THrUST BeArInG K
BODY BOLTS L
BODY nUTS with LOCK WASHerS M
STeM nUTS n
LOCK WASHer O
SeT SCreW FOr COLLAr P
STeM COLLAr Q
STeM SeAL WASHer r
STeM BeLLeVILLe SPrInGS S
3-Piece, High Flow Safety relief, Cast Cryogenic Ball Valve
NO J
NI
EGR
D
KQ
S
M
BH
AHF
CF
B
L
P
PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™16
SERIES 21/31
SIZE RANGE 1/2” - 3”
PRESSURE RANGE ASMe 150 - 900
END CONNECTIONS To be installed between existing flanges
STANDARD CAVITY PRESSURE RELIEF
METHOD
Upstream hole in ball or cavity pressure relieving seats.
BALL / SEAT CONFIGURATION
Floating ball
BODY SEAL DESIGN
Totally encapsulated body seals to prevent cold flow of PTFe. High performance over wide temperature and pressure range. Spiral wound body seals ASMe 600 and above.
CASTING TYPE Investment cast or sand cast; size and pressure class dependant.
UNIQUE FEATURE Wafer design reduces weight and installation [labor] costs.
BILL OF MATERIAL PART ITEM
BODY A
enD PLATeS B
BALL C
STeM D
FOLLOWer e
SeATS F
STeM SeALS G
BODY SeALS H
STOP I
HAnDLe J
THrUST BeArInG K
STeM nUTS L
SHIPPInG SCreWS M
STeM BeLLeVILLe SPrInGS n
LOCK WASHer O
STeM COLLAr P
SeT SCreW FOr COLLAr Q
STOP PInS / BOLTS r
STeM SeAL WASHer S
3-Piece, Wafer Cast & Barstock Cryogenic Ball Valve
LO J
LI
E
G
S
D
KP
N
M
BF
H
AC
FH
BM
Q
R
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™ 17
2-Piece, Full & Standard Port, Split Body, Barstock Cryogenic Ball Valve
SIZE RANGE 1/2” - 12”
PRESSURE RANGE ASMe 150 - 1500
END CONNECTIONS Flanged - raised face
STANDARD CAVITY PRESSURE RELIEF
METHOD
Upstream hole in ball or cavity pressure relieving seats.
BALL / SEAT CONFIGURATION
Floating ball or trunnion ball support.
BODY SEAL DESIGN
Totally encapsulated body seals to prevent cold flow of PTFe. High performance over wide temperature and pressure range. Spiral wound body seals ASMe 600 and above.
CASTING TYPE Does not apply.
UNIQUE FEATURE The 21/18 offers unsurpassed reliability with a body machined from solid wrought materials, providing maximum strength and virtually eliminating porosity.
BILL OF MATERIAL PART ITEM
BODY A
enD PLATe B
BALL C
STeM D
FOLLOWer e
SeATS F
STeM SeALS G
BODY SeAL H
STOP PLATe I
HAnDLe J
THrUST BeArInG K
STOP PInS / BOLTS L
STeM nUTS M
STeM BeLLeVILLe SPrInGS n
BODY nUTS with LOCK WASHerS
O
BODY STUDS P
SeT SCreW FOr COLLAr Q
STeM COLLAr r
STeM SeAL WASHer S
HAnDLe SPACer T
reTAInInG WASHer U
HAnDLe reTAInInG BOLT V
SERIES 21/18
Single Body Seal Design
V U T
JM
N
E
G
D
KR
AF P
CF
H
B
O
Q
L
I
S
PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™18
SERIES 21/20
SIZE RANGE 1/2” - 8”
PRESSURE RANGE ASMe 150 - 300
END CONNECTIONS Flanged - raised face
STANDARD CAVITY PRESSURE RELIEF
METHOD
Upstream hole in ball or cavity pressure relieving seats.
BALL / SEAT CONFIGURATION
Floating Ball
BODY SEAL DESIGN
Totally encapsulated body seals to prevent cold flow of PTFe. High performance over wide temperature and pressure range.
CASTING TYPE Investment Cast 1/2” - 3”. Sand Cast 4” and above.
UNIQUE FEATURE Unibody construction; no external leak paths through valve body, dual body seal design.
BILL OF MATERIAL PART ITEM
BODY A
enD PLUG B
BALL C
STeM D
FOLLOWer e
SeATS F
STeM SeALS G
BODY SeAL - Inner H
BODY SeAL - OUTer I
STOP PLATe J
HAnDLe K
THrUST BeArInG L
STeM nUTS M
STOP PInS/ BOLTS n
LOCK WASHer O
STeM BeLLeVILLe SPrInGS P
STeM SeAL WASHer Q
SeT SCreW FOr COLLAr r
STeM COLLAr S
end entry, Standard Port, Cast, Flanged Cryogenic Ball Valve
Dual Body Seal Design
MO K
M J
E
G
D
L
S
N
B
AH
FC
FI
R
Q
P
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™ 19
SERIES 21/28
SIZE RANGE 1” - 8”
PRESSURE RANGE ASMe 150 - 600
END CONNECTIONS Flanged - raised face
STANDARD CAVITY PRESSURE RELIEF
METHOD
Upstream hole in ball or cavity pressure relieving seats.
BALL / SEAT CONFIGURATION
Floating ball
BODY SEAL DESIGN
Totally encapsulated body seals to prevent cold flow of PTFe. High performance over wide temperature and pressure range.
CASTING TYPE Investment Cast 1” - 3”. Sand Cast 4” - 8”.
UNIQUE FEATURE now available in ASMe Class 600: 3” - 8”.
BILL OF MATERIAL PART ITEM
BODY A
enDPLATe B
BALL C
STeM D
FOLLOWer e
SeATS F
STeM SeALS G
STeM SeAL WASHer H
STeM COLLAr I
BODY SeAL J
BODY STUDS K
BODY nUTS L
THrUST BeArInG M
STOP PInS / BOLTS n
STeM BeLLeVILLe SPrInGS O
STOP PLATe P
HAnDLe Q
HAnDLe SPACer r
reTAInInG WASHerS S
HAnDLe reTAInInG BOLT T
2-Piece, Full Port, Split Body, Cast, Flanged Cryogenic Ball Valve
TS
Q
E
D
MI
N
B
AF
CF
J
G
SRPO
H
KL
G
PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™20
SERIES 21/80
SIZE RANGE 8” - 16”
PRESSURE RANGE ASMe 150 - 900
END CONNECTIONS Flanged - raised face
STANDARD CAVITY PRESSURE RELIEF
METHOD
Bidirectional flow with pressure relief upstream.
BALL / SEAT CONFIGURATION
Trunnion
BODY SEAL DESIGN
Spiral wound gaskets
CASTING TYPE Sand cast
UNIQUE FEATURE
Trunnion design with pressure activated seats with cavity pressure relief in the ball (spool piece in ball) for bi-directional flow or hole in ball for unidirectional flow.
BILL OF MATERIAL PART ITEM
BODY A
TrUnnIOn B
STeM C
BODY GASKeT D
SeATS e
BALL F
UPPer BUSHInG G
LOWer BUSHInG H
BOnneT ASSeMBLY I
enD FLAnGe J
TrUnnIOn FLAnGe K
BODY STUDS L
BODY nUTS M
BOnneT GASKeT n
THrUST BeArInG O
TrUnnIOn GASKeT P
BOnneT STUDS Q
BOnneT nUTS r
FOLLOWer S
PACKInG FLAnGe T
BrACKeT U
BrACKeT STUDS V
BrACKeT nUTS W
PACKInG FLAnGe nUTS X
PACKInG FLAnGe BOLT S Y
2-Piece, full Port, Split Body, Cast, Flanged Cryogenic Ball Valve
T
S
C
V
J
R
E
FE
D
GO
M
U
X
I
WY
N
HPK
A
Q
R
B
L
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™ 21
AFTERMARKET SERVICES FOR RETROFIT APPLICATIONS
Cameron’s Aftermarket Services’ goal is to help our customers
lower the total cost of valve ownership. To that end we offer
a full range of services from over twenty-five Service Centers
worldwide and can provide experienced personnel trained to
meet the specific service requirements of each valve type.
Aftermarket Services
• Supplies replacement valves and parts:
– Maintains a full inventory of new and
reconditioned valves for immediate delivery
– Provides factory warranty support for all Cameron
OeM brands as well as service for most other
valves
• Field Service & Technical Support
– Field service technicians on call 24 hours a day
7 days a week to handle service issues wherever
they arise
– Provides equipment installation, field repairs, as
well as track and perform scheduled maintenance
• Customer Property repair
– The Customer Property repair program allows
Cameron valve customers to store assets at
our service centers throughout the world
– Valves tracked in electronic database
accessible through the Internet
• remanufactured Products
– Offers a broad range of API-compliant
reconditioned equipment with fast delivery
• Total Valve Management
– Supply and service automation and control
packages
– Assist with valve installation, commissioning
and start-up
CERTIFICATIONS
PROCESS VALVES
CT-TBV-BALL-CV 04/10-SWP-3M
TBV™22
TRADEMARK INFORMATION
TBV™ is a registered trademark which is owned by Cameron.
This document contains references to registered trademarks or product designations,
which are not owned by Cameron.
Trademark Owner
MONEL INCO Alloys International, Inc.
PROCESS VALVES PROCESS VALVES
PROCESS VALVES
VALVES & MEASUREMENT3250 Briarpark Drive, Suite 300Houston, TX 77042USA Toll 800 323 9160
For the most current contact and location information go to: www.c-a-m.com/valvesandmeasurement
© Cameron Printed in USA 04/10-SWP-3M CT-TBV-BALL-CV WEB ONLY