tcm learning6.ppt
TRANSCRIPT
-
8/12/2019 TCM LEARNING6.ppt
1/4
-
8/12/2019 TCM LEARNING6.ppt
2/4
verseas Service Team
2) 2-1 downshift learning when vehicle stops
- Drive the vehicle with speed of 30km/h.
- Depress the brake pedal normally.- Repeat above procedure more than 5 times.
2.When the ATF temperature is 50 - 100.
(After driving the vehicle for 10 minutes)
1) Upshift learning (The shift should be performed while the throttle
opening ratio is maintained constantly)
Keep the following order.
- TH. opening ratio 50-60% : 1234 upshift (5 times)
- TH. opening ratio 100% : 123 upshift (5 times)
- TH. opening ratio 30-40% : 1234 upshift (5 times)
- TH. opening ratio 10-20% : 1234 upshift (5 times)
2) 4-3, 3-2 downshift learning when vehicle stops
- Drive the vehicle with speed of 60km/h (4th gear).
- Depress the brake pedal smoothly.
- Repeat the downshift of 4-3, 3-2 more than 5 times.
TCM LEARNING
-
8/12/2019 TCM LEARNING6.ppt
3/4
verseas Service Team
3) 2-1 downshift learning when vehicle stops
- Drive the vehicle with speed of 30km/h.- Depress the brake pedal normally.
- Repeat above procedure more than 5 times.
4) N-D, N-R learning
- Vehicle stopping
- Engine RPM should be below 1,000rpm- Move the shift lever N-D, N-R
(2 or more seconds is needed at N range)
- Repeat above procedure more than 10 times.
5) Kick down learning
43 downshift learning
- At the speed of 90, 100, 110, 120, 130, 140km/h
- Repeat 43 downshift 3-5 times at the above each speed.
TCM LEARNING
-
8/12/2019 TCM LEARNING6.ppt
4/4
verseas Service Team
42 skip shift learning
- At the speed of 90, 100, 110, 120km/h
- Repeat 42 skip shift 3-5 times at the above each speed.
32 down shift learning
- At the speed of 60, 70, 80, 90, 100, 110, 120km/h
- Repeat 32 down shift 3-5 times at the above each speed.
21 down shift learning
- At the speed of 20, 30km/h
- Repeat 21 down shift 3-5 times at the above each speed.
TCM LEARNING