tds cotton 2017 cur1 - texwipe5 seconds 240 ml/m2 1 second 1, tm20 1, tm20 basis weight 184 g/m 2155...

2
TECHNICAL DATA SHEET Americas +1 336 996 7046 | EMEA +31 88 1307 410 | Philippines +63 49 543 0241 | China +86 0512 6303 3700 www.texwipe.com *Test Methods 1 – “Evaluating Wiping Materials Used in Cleanroom and Other Controlled Environments,” IEST-RP-CC004.3, Institute for Environmental Sciences and Technology, Rolling Meadows, IL, 2004; www.iest.org. 2 – E2090-12, “Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy,” ASTM International, West Conshohocken, PA, 2012; www.astm.org. TM – Refers to Texwipe Test Method – available upon request. Contact Texwipe Customer Service at www.texwipe.com or [email protected] for a copy. Note: The data in this table represent typical analyses. Texwipe holds ISO 9001 and ISO 14001 registrations. All Texwipe products conform to GHS classification for labeling (where applicable). Shipping classification based on weight of inner package. Performance Characteristics Property Typical Value Test Method* TexWipe ® NuCotton ® Particles and Fibers LPC: 0.5 μm Fibers: >100 μm 75 x 10 6 particles/m 2 90,000 fibers/m 2 90 x 10 6 particles/m 2 105,000 fibers/m 2 1, TM22 2, TM22 Nonvolatile Residue IPA extractant DIW extractant 0.35 g/m 2 0.16 g/m 2 0.38 g/m 2 0.21 g/m 2 1, TM1 1, TM1 Ions Sodium Potassium Chloride 35 ppm 1 ppm 2.5 ppm 43 ppm 1.4 ppm 3.7 ppm 1, TM18 1, TM18 1, TM18 Physical Characteristics Property Typical Value Test Method* TexWipe ® NuCotton ® Absorbency Sorptive capacity Sorptive rate 260 mL/m 2 5 seconds 240 mL/m 2 1 second 1, TM20 1, TM20 Basis Weight 184 g/m 2 155 g/m 2 1, TM20 Cleanroom Wipers TexWipe ® / NuCotton ® TEX-LIT-TDS-010 Rev.00-02/17 TexWipe ® Dry Wipers www.texwipe.com wipe e.com TexWipe ® Dry Wipers

Upload: others

Post on 06-May-2020

7 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: TDS Cotton 2017 CuR1 - Texwipe5 seconds 240 mL/m2 1 second 1, TM20 1, TM20 Basis Weight 184 g/m 2155 g/m 1, TM20 Cleanroom Wipers TexWipe® / NuCotton® TEX-LIT-TDS-010 Rev.00-02/17

T E C H N I C A L D A T A S H E E T

Americas +1 336 996 7046 | EMEA +31 88 1307 410 | Philippines +63 49 543 0241 | China +86 0512 6303 3700 www.texwipe.com

*Test Methods1 – “Evaluating Wiping Materials Used in Cleanroom and Other Controlled Environments,” IEST-RP-CC004.3, Institute for Environmental Sciences

and Technology, Rolling Meadows, IL, 2004; www.iest.org.

2 – E2090-12, “Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy,” ASTM International, West Conshohocken, PA, 2012; www.astm.org.

TM – Refers to Texwipe Test Method – available upon request. Contact Texwipe Customer Service at www.texwipe.com or [email protected] for a copy.

Note: The data in this table represent typical analyses.

Texwipe holds ISO 9001 and ISO 14001 registrations.

All Texwipe products conform to GHS classifi cation for labeling (where applicable).Shipping classifi cation based on weight of inner package.

Performance CharacteristicsProperty Typical Value Test Method*

TexWipe® NuCotton®

Particles and FibersLPC: ≥0.5 µmFibers: >100 µm

75 x 106 particles/m2

90,000 fi bers/m2

90 x 106 particles/m2

105,000 fi bers/m2

1, TM22 2, TM22

Nonvolatile ResidueIPA extractantDIW extractant

0.35 g/m2

0.16 g/m2

0.38 g/m2

0.21 g/m2

1, TM11, TM1

IonsSodiumPotassiumChloride

35 ppm1 ppm2.5 ppm

43 ppm1.4 ppm3.7 ppm

1, TM181, TM181, TM18

Physical CharacteristicsProperty Typical Value Test Method*

TexWipe® NuCotton®

AbsorbencySorptive capacitySorptive rate

260 mL/m2

5 seconds240 mL/m2

1 second1, TM201, TM20

Basis Weight 184 g/m2 155 g/m2 1, TM20

Cleanroom Wipers TexWipe® / NuCotton®

TEX-

LIT-

TDS-

010

Rev.0

0-02

/17

TexW

ipe®

Dry

Wipe

rs

www.texwipe.comwipee.com

TexW

ipe®

Dry

Wipe

rs

Page 2: TDS Cotton 2017 CuR1 - Texwipe5 seconds 240 mL/m2 1 second 1, TM20 1, TM20 Basis Weight 184 g/m 2155 g/m 1, TM20 Cleanroom Wipers TexWipe® / NuCotton® TEX-LIT-TDS-010 Rev.00-02/17

Americas +1 336 996 7046 | EMEA +31 88 1307 410 | Philippines +63 49 543 0241 | China +86 0512 6303 3700 www.texwipe.com

T E C H N I C A L D A T A S H E E T

Made in USAM d i USA

ProductsNumber Description Sterile Packaging Case

Dry Wipers – TexWipe®

TX304 4" x 4" (10 cm x 10 cm) dry 1,200 wipers/bag (4 inner bags of 300) 6 bags

TX306 6" x 6" (15 cm x 15 cm) dry 600 wipers/bag (2 inner bags of 300) 6 bags

TX309 9" x 9" (23 cm x 23 cm) dry 300 wipers/bag (2 inner bags of 150) 6 bags

TX312 12" x 12" (31 cm x 31 cm) dry 150 wipers/bag 6 bags

Dry Wipers – NuCotton®

TX329 9" x 9" (23 cm x 23 cm) dry 300 wipers/bag 6 bags

Cleanroom Wipers TexWipe® / NuCotton®

TexWipe® / NuCotton®

100% cotton

TexWipe® (top) NuCotton® (bottom)

Americas +1 336 996 7046 | EMEA +31 88 1307 410 | Philippines +63 49 543 0241 | China +86 0512 6303 3700 www.texwipe.com

Custom products available upon request.

T E C H N I C A L D A T A S H E E TT E C H N I C A L D A T A S H E E T

Cleanroom Wipers TexWipe® / NuCotton®

DescriptionTexWipe® and NuCotton® are made from 100% cotton material with a cut edge, cleanroom manufactured.

Applications• Cleaning, polishing and burnishing of surfaces and

equipment.

• Applying and removing lubricants, adhesives, residues and other solutions including disinfectants.

• Cleaning with solvents such as isopropyl alcohol (IPA), ethanol, acetone, and degreasers.

• Lining trays for holding, protecting, drying and storing of parts, equipment and devices.

• Handling hot items and protecting surfaces from elevated <700°F (<371°C) temperatures.

Industries

Aerospace Animal Laboratory Biologics

Cleanroom Design/Build

Compounding Pharmacies Data Storage

Facilities Maintenance Industrial Laboratory

Medical Device Microelectronics Pharmaceutical

Printing/Graphics Semiconductor

Features & Benefi ts• Constructed from long staple 100% cotton yarn to reduce

free fl oating fi bers on the surface while still providing excellent wiping and cleaning.

• Made from sustainable and renewable materials grown and processed in the United States.

• Designed for use on abrasive surfaces. This wiper will not easily snag or abrade releasing particles and fi bers intothe process or environment.

• Excellent chemical resistance for compatibility with a variety of solutions.

• Autoclave safe.

• Bias-cut to minimize edge shedding and fraying.

• Individually lot coded for ease of traceability and quality control.

Cleanroom Environment• ISO Class 6 – 8

• Class 1,000 – 100,000

• EU Grade B – D

Shelf Life• Non-Sterile (Dry) – 5 years from date of manufacture