tds_mol dynamic synt 5w-30_gb
TRANSCRIPT
-
7/28/2019 Tds_mol Dynamic Synt 5w-30_gb
1/3
AUTOMOTIVE LUBRICANTSMOL Dynamic Synt 5W-30
synthetic motor oil
Product benefits
- top performance engine oil- reliable engine protection- high thermal and oxidation stability- fuel economy
Applications
MOL Dynamic Synt 5W-30 exceeds the requirements of the most important automobile associations and enginemanufacturers.
MOL Dynamic Synt 5W-30 fulfils the gasoline and diesel engines' requirements of General Motors (Opel) for longdrain intervals.
MOL Dynamic Synt 5W-30 engine oil obtained the service oil approval of Volkswagen, which enables normal drainintervals for gasoline and diesel engines.
MOL Dynamic Synt 5W-30 obtained BMW long drain approval for vehicles not fitted with DPF.
MOL Dynamic Synt 5W-30 is a state-of-the -art engine oil developed for the most advanced gasoline or dieselpassenger cars and light commercial vehicles with naturally aspirated or turbocharged operation.
Owing to its special composition (special synthetic base oil and a complex additive system), MOL Dynamic Synt5W-30 engine oil provides outstanding engine protection still at the end of long engine oil drain periods permitted byautomobile manufacturers even when used under extreme working conditions.
Specifications and approvals
Viscosity grade: SAE 5W-30
MB-Approval 229.3GM-LL-A-025
GM-LL-B-025BMW Longlife-01
ACEA A3/B4-04API SL/CFVW 502 00/505 00ILSAC GF-4
Manufactured and distributed by: MOL-LUB Ltd.Technical service: H-1117 Budapest, Oktber huszonharmadika u. 18.
H-1986 Budapest, MOL Plc. Tel: +36-1-4640236 Fax: +36-1-4640304 E-mail: [email protected] revision: 2010.07.13 10:51
-
7/28/2019 Tds_mol Dynamic Synt 5w-30_gb
2/3
AUTOMOTIVE LUBRICANTSMOL Dynamic Synt 5W-30
synthetic motor oil
Product description
MOL Dynamic Synt 5W-30 is a top tier product manufactured from synthetic base oils and complex additive system(detergent/dispersant, antioxidant, antiwear, anticorrosive and antifoam agents, flow improver) provides excellentcold flow characteristics and offers the highest performance levels for passenger cars.
It outstanding engine protection and saves from intensive wear- typically occurring at cold-starts- under extreme coldconditions as well. Enables trouble-free cold-start and protects battery.
Due to its low evaporation characteristics the product reduces oil consumption, and consequently exhaust emission ofharmful chemicals. Oxidation stability specific to synthetic oils ensures the original properties to remain unchangedeven at permanently high engine operating temperatures.
Typical properties
Typical valuesProperties
0,860Density at 15C [g/cm3]
69,6Kinematic viscosity at 40C [mm2/s]
11,8Kinematic viscosity at 100 C [mm2/s]
166Viscosity index
-39Pour point [C]
225Flash point (Cleveland) [C]
10,7Base number (BN) [mg KOH/g]
The characteristics in table are typical values of the product and do not constitute a specification.
Storage and handling instructions
Store in the original container in dry, properly ventilated area. Keep away from direct flame and other sources ofignition. Protect from direct sunlight.During transport, storage and use of the product follow the work safety instructions and environmental regulations
relating to mineral oil products.For further details please read the Material Safety Data Sheet of the product.Engine oils are finished lubricant formulations where additional additives are unnecessary and may result inunforeseeable adverse effects. The manufacturer and distributor shall not be held liable for such possible damages.
In the original container under the recommended storage conditions: 60 monthsInflammability hazard: Grade IV.
Recommended storage temperature: max. 40C
Manufactured and distributed by: MOL-LUB Ltd.Technical service: H-1117 Budapest, Oktber huszonharmadika u. 18.
H-1986 Budapest, MOL Plc. Tel: +36-1-4640236 Fax: +36-1-4640304 E-mail: [email protected] revision: 2010.07.13 10:51
-
7/28/2019 Tds_mol Dynamic Synt 5w-30_gb
3/3
AUTOMOTIVE LUBRICANTSMOL Dynamic Synt 5W-30
synthetic motor oil
Ordering information
SAP code and packaging:1 l plastic bottle13006148
4 l plastic can13006150 60 l steel drum13006149216.5 l steel drum13006706
Order booking ( toll-free):
Phone: 80/201-331 (between 07-16 h weekdays )
Manufactured and distributed by: MOL-LUB Ltd.Technical service: H-1117 Budapest, Oktber huszonharmadika u. 18.
H-1986 Budapest, MOL Plc. Tel: +36-1-4640236 Fax: +36-1-4640304 E-mail: [email protected] revision: 2010.07.13 10:51