te mpor ar ily r e move tr ailhawk mode ls : plas tic …plas tic f as cia. i nstallati on w...
TRANSCRIPT
PE RIODICALLY CHECK THIS RE CEIVE R HITCH TO E NSURE ALL FAS TE NER S ARE TIGHT AND ALL S TR UCTURAL COMPONE NTS AR E S OUND CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing
LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. Curt
Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage. For more information
log onto www curtmfg com & for helpful towing tips log onto www hitchinfo com
MAK E: STY LE:
MI N.30
W AR NI NG: NEVER EX CEED Y OUR V EHI CLE MANUFACTUR ER 'S R ECOMMENDED TOW I NG CAPACI TY
W EI GHT CAR RY I NG:
INSTALLATION TIPS:
INSTALLATION REQUIRES:
VEHICLE PHOTO:
HITCH ILLUSTRATION:
REPRESENTATIVE PHOTO
MAKE SURE YOUR HITCH MATCHES
LEVEL OF DIFFICULTY: EASY
EASY CHALLENGI NGMODER ATE
1. BEFORE YOU BEGIN INSTALLATION, READ ALL
INSTRUCTIONS THOROUGHLY.
2. TO EASE INSTALLATION, 2 PEOPLE MAY BE
REQUIRED.
3. USING PROPER TOOLS WILL GREATLY IMPROVE
THE QUALITY OF THE INSTALL AND REDUCE THE TIME REQUIRED.
4. NEED HELP OR HAVE SOME QUESTIONS?
CALL TECHNICAL SUPPORT AT 800.798.0813
Safety g lasses should be w orn at all t imes w hile
installing this product .
Y EARS: 2014-PRESENT J EEP MODEL: CHER OKEE
5000
750
TR AI LER W EI GHT:
TONGUE W EI GHT:
13171 I NS TALLATI ON I NS TR UCTI ONS
LBS.
LBS.
5/ 15/ 2020
W EI GHT DI STRI BUTI ON: TR AI LER W EI GHT:
TONGUE W EI GHT:
6000
750
LBS.
LBS.
MI N.60
IF YOU ARE HESITANT TO UNDERTAKE
THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED
CURT INSTALLER FOR ADDITIONAL ASSISTANCE.
NOVICE INSTALL TIME:
PRO INSTALL TIME:
SCAN FOR MORE INFO
NO DR ILLING RE QUIRE D
F IS HWIR E HAR DWAR E
RE VE RS E FIS HWIR E HAR DWAR E
SAFETY GLASSES R ATCHET SOCKET
3/ 4"8mm
21mm
SOCKET EX TENSI ON
6"
TOR QUE W R ENCH
ALL (INCLUDES TRAILHAWK)
PAR T R EMOVAL
TRAILHAWK MODELS : CLE AN WE LDNUTS
IF NEE DE D
TR AILHAWK MODE LS : TE MPOR AR ILY RE MOVE
PLAS TIC FAS CIA
I NSTALLATI ON W ALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
Parts List
DES CRIPT ION PART NUMBERQTY ITE M
NUT ,SE R -FLANGE ,1/2-13 UNC ,GR D8,YZ20-0006261
BOLT ,CAR ,1/2-13 UNC ,1-1/2,GR D8,Y Z10-1028762
1/2" F IS HWIRE1_2 F IS HWIRE63
.250 x 1.00 x 3.00" S QUARE HOLE S PACERCM-SP664
3
2
4
1
PAS SENGER S IDE FRAME RAIL
DRIVER S IDE FRAME RAIL
HARDWARE ACCESS HOLE (BOTH S IDES )
1. Trailhawk models: Temporary plastic fascia removal is required for install. Remove (4) screws with a 10mm socket
from the bottom of the panel, and push on tabs to unclip. S et aside for reassembly.
2. E xamine vehicle frame rails - If wire is present on either side frame rail, unfasten by pulling retainer out of the frame and temporary let hang loose below frame rail.
R emove square rubber plug on each side of the frame rail to expose hardware access holes. R eturn plugs to owner.
TR AILHAWK MODELS : UT IL IZE EX IS TING WE LDNUTS
(BOTH S IDE S )
I NSTALLATI ON W ALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. F ishwire rear and side mounting hole hardware through the access hole in the vehicle frame. Reverse fishwire remaining
hardware through the access hole (both sides). Trailhawk models: Only use "reverse fishwire hardware" and the vehicle M14 bolts previously removed.
4. R aise hitch up from in front of the exhaust and into position, using care not to push hardware back inside frame. Be sure to loosely secure hitch with the mounting hardware to align all holes before tightening.
Note: S eam foam may need to be trimmed for proper mounting plate fit.
5. As needed, resecure wire to vehicle frame rail. Torque all 1/2" hardware to 110 lb-ft. Trailhawk: Torque all M14 hardware to 139 lb-ft.
Installation C omplete
6. Trailhawk models: C lip plastic fascia panels into place and secure with (4) screws.
GROSS L OAD CAPACITY WHEN USED AS A WEIGHT CARRY ING HIT CH: LBS. TR AIL E R WEIGHT & LBS. TONGUE WEIGHT . GR OSS L OAD CAPACITY WHE N USED AS A WEIGHT DIST R IBUT ION HIT CH: L BS. TRA IL E R WE IGHT & L BS. TONGUE WE IGHT
***DO NOT E X C E E D V E HIC L E MA NU F A C T UR E R 'S R E C OMME NDE D T OWING C A PA C IT Y .*** HAVING INSTA L L AT ION QUE ST IONS? CAL L T EC HNICAL SUPPOR T AT 1-877-287-8634
INS TALLA TION S TE PS
P E R IODIC A L L Y C H E C K T H IS R E C E IV E R H IT C H T O E NS U R E T H A T A L L F A S T E NE R S A R E T IGH T A ND T HA T A L L S T R U C T UR A L C OMP ONE NT S A R E S OU N D.
C urt Manufacturing LLC ., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, C urt Manufacturing LLC ., may repair or replace the product, at their option, when the product is returned, prepaid,
with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. C urt Manufacturing LLC .'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
5,000 7506,000 750
J E E P CHE ROK E E (ALL MODE LS INCLUDING TR AIL HAWK )
5/15/2020
13171
60
48
30
HIT CH WE IGHT : LBS .
INS TA LL T IME
P R OF E S S IONAL: MINUTE S
NOV IC E (DIY ): MINUT E S
INS TA LL NOT E S :
S canfor moreinformation
P arts List
DE S C R IPT IONPAR T NUMBE RQTYIT E M
NUT ,S E R -F LA NGE ,1/2-13 UNC ,G R D8,Y Z20-0006261
BOLT ,C AR ,1/2-13 UNC ,1-1/2,G R D8,Y Z10-1028762
1/2" F IS HWIR E1_ 2 F IS HWIR E63
.250 x 1.00 x 3.00" S QUA R E HOLE S P AC E RC M-S P664
TOOLS RE QUIRED
RATCHE T 3/4", 8mm, 21mm S OCKET
6" SOCKE T E XTENS ION TOR QUE WRE NCH
PAS S E NGE R S IDE FR AME R AIL
DR IVE R S IDE FR AME R AIL
HARDWARE ACC E S S HOLE (BOTH S IDE S )
2
4
1
3
1. Trailhawk models: Temporary plastic fascia removal is required for install. R emove (4) screws with a 10mm socket from the bottom of the panel, and puch on tabs to unclip. S et aside for reassembly.
2. Examine vehicle frame rails - If wire is present on either side frame rail, unfasten by pulling retainer out of the frame and temporarily let hang loose below frame rail.
Remove square rubber plug on each side of the frame rails to expose access holes. R eturn plugs to owner. 3. F ishwire rear and side mounting hole hardware throught the access hole in the vehicle frame. R everse fishwire
remaining hardware through the access hole (both sides). Trailhawk models: Only use "reverse fishwire hardware" and the vehicle M14 bolts previously removed.4. Raise hitch up from in front of the exhaust and into position, using care not to push hardware back inside frame. Be sure to loosely secure hitch with the mounting hardware to align all holes before tightening.
Note: S eam foam may need to be trimmed for proper mounting plate fit.5. As needed, resecure wire to vehicle frame rail. Torque all 1/2" hardware to 110 lb-ft. Trailhawk models: Torque all M14 hardware to 139 lb-ft.
6. Trailhawk models: C lip plastic fascia panel into place and secure with (4) screws.
- NO DR IL LING - F IS HWIR E HAR DWA R E
- R E V E R S E F IS HWIRE HAR DWAR E - TR AILHAWK : T E MP. R E MOV E F AS C IA
TR AILHAWK MODE LS : UTILIZE E XIS TING
WE LDNUTS (BOTH S IDE S )