DS

001

00

2 3

9 a TE

CE N

EWS

ISH

09 TECElogo

TEC

E pr

oduc

t in

fo a

nd in

nova

tions

TECEsquare

Professional push fittings

The TECElogo push fitting system for sanitary and heating connection has a genuine USP: The system, tested by the German Technical and Scientific Association for Gas and Water (DVGW), enables connections that have already been pushed together to be released again with a special disassembly key.

This is achieved through a clamping ring inside the fittings, which grips the pipe during push fitting. The clamping ring is made of plastic and therefore cannot damage the pipe sheathing.

TECElogo offers the complete reliability

of a professional installation system. This is also guaranteed by DVGW approval. The advantage of the special push fitting technology is the significant reduction in assembly work, which leads to a time saving of 30 to 40 percent compared with conventional systems. This means a huge competitive advantage for pipe-fitting professionals, particularly in commercial construction.

The TECElogo fittings are made of the high-performance plastic PPSU® or DR brass with a low level of dezincification – perfect materials for use with potable water. The plastics used are temperature-resistant and highly shock-resistant.

Problems solved: With the TECE push fitting, connections that were pushed together incorrectly can be undone again with a special key, and the fitting can be reused.

Professional push fittings for real hands-on expertsThe full TECElogo range has been available since December 2008. Initial experiences in practical application have shown that TECElogo offers users real processing advantages.

The fitting consists of just three ready-assembled components plus O-ring. Pipe shears and a calibration mandrel are all that are needed to work with TECElogo. The composite pipes developed specially for the system can be easily bent by hand and retain their bending stability.

TECElogo

2

After soldering came pressing – and now we have push-fitting ...Put to the test: TECE demonstrates the stability of its new push-fitting system with the help of horse power

Housing technology specialist TECE cast a glance into the future of pipe connection technology at a press conference on 13th November in Emsdetten, North Rhine-Westphalia. Using its own push-fitting system for sanitary and heating installation, TECE presented initial experiences of users in practice and demonstrated the stability of a push-fitted TECElogo connection in a special load test. The trial was based on a famous forerunner: In 1657, Otto von Guericke, from Magdeburg, pumped

the air from two hemispheres that had been joined together, then harnessed eight horses to each, and had the horses attempt to pull the hemispheres apart with all their strength. As von Guericke expected, the hemispheres could not be separated despite the power of several horses, because the air pressure acting on the spheres with the vacuum was stronger. TECE used this method of proving a tight connection as its model and commissioned Tobias Bücker, a specialist on the German

The TECElogo fitting is very com-pact and consists of just three ready-assembled components plus an O-ring seal

Its high impact resistance is ensured by the positive material properties of the high-performance PPSU plastic. DR brass is processed in the threaded fittings. This alloy is especially well suited for potable water installatons.

The inspection window for checking the push-in depth is made of trans-parent plastic, so dirt cannot enter the fitting, the O-ring stays clean and the connection remains tight.

The TECElogo fitting:robust and safe

equestrian sport scene, as the leader of the trial. Bücker is several times world champion, European champion and German champion in carriage driving. With a special shaft aimed at evenly distributing the tractive forces acting on the pipe, Bücker harnessed two ponies to each end of the pipe and had them pull with full force. The push-fitting connection remained stable.

TECElogo tool set in a practical case

Everything you need to cut and chamfer the TECElogo composite pipe and to solder push-fitted connections.

TECElogo – the rangeThe TECElogo range offers everything the fitter needs for sanitary, floor and heating installations – in the most common dimensions of 16, 20 and 25 mm.

Experts do not only want reliable techniques, they also want a product range with which all installation work can be carried out without any problems. Apart from standard fitting variants, TECElogo also offers practical, pre-assembled solutions for the installation of washstands or the connection to radiators, for example.

3

TECEsquare toilet push plate: awarded the Design Plus Prize 2009

The new TECE push plate is extremely flat and with a minimalist design. For the experts on the jury for the coveted Design Plus Prize, this was well worth an award.

TECEsquare exploits the effect of pure stainless steel and integrates perfectly into a modern bathroom architecture with its extremely flat design. Three narrow seams indicate the buttons for flush triggering: one large button for full flush and a smaller one for reduced flush. To execute the unusual design, TECE developed a special switch technology, which enables actuation with the two buttons. The WC push plate is largely installed within the wall with the help of a special assembly frame. Only the extremely flat stainless steel plate, which has a depth of just 2 mm, remains visible. TECE has applied an extremely thin, abrasion-resistant protective layer on the surface of the stainless steel actuator. As a result, fingerprints are not visible after use. (Available from mid 2009)

TECE and Design This year, two new TECE products were awarded the Design Plus Prize: TECEsquare, the new WC push plate in stainless steel, and the new drain valve for the TECE cistern. While TECEsquare won the jury over with its appearance, inner values were what counted in the drain valve.

TECE has now won a total of six Design Prizes. In 2004, the WC fitting won the Design Plus Prize and the Red Dot Award.

In 2007, the TECEloop push plate and TECEdrainline shower channel “plate” won the Innovation Prize for Architecture and Technology.

TECEsquare

TECEsquare with metal or glass cover

A TECEsquare version with a glass cover is also planned. As in the TECEloop series, push plates can be installed on the wall or – with the help of a special installation frame, completely flush-mounted.

4

TECEloop

The TECEloop modular system: 96 possible combinationsThe system contains a standard range of coloured glass fronts and buttons. The highlight: Some of the TECEloop glass covers coordinate with the products from Alape and Emco. As a result, bathroom planners always have the right WC push plate to match the accessories and furnishings of both manufacturers.

The combination of 8 buttons and 12 covers in the modular system offer additional design options. TECE offers buttons with a chrome or gold surface, for example. The buttons with a brushed stainless-steel look are particularly fashionable. There are 96 possible combinations in total. Other RAL colours can be ordered specially. For customer advisory services, TECE has developed a slipcase that contains samples of all covers and buttons in Loop original size, so it’s easy to find the right colour combination. (Available from mid 2009)

+

=

The combination of 8 buttons and 12 covers in the modular system offer additional design options.

Some TECEloop glass cover colours match the accessories and furnishings from Emco and Alape. Fig. Alape series

Foto Alape, Glas ruby

5

New standard WC actuation with square designUse of the new plastic push plate will be of particular interest in the standard and project area. TECEbase has a dual-flush function. The narrow button actuates a reduced flush, the wide button a full flush. Like all toilet push plates from TECE, its dimensions are relatively small and it fits the TECE actuation concept for all TECE cistern models. (Available from mid 2009)

TECEbase

The TECE cisternA clear interior and a well-designed concept. All TECE cisterns can be combined with the entire range of TECE push plates.

Design Plus Prize – the new drain valve for the TECE cistern The new drain valve from TECE is a real all-rounder: With a 3-litre reduced flush, four different settings are possible for the full flush, including the water-saving setting with 4.5 litres. Consisting of a compact unit, the valve is easy to use and maintain.TECE was awarded the Design Plus Prize for this innovation in flush technology.

Users save around 25 percent of water, as compared to the single-flush technology. With a simple slider, the fitter can choose between 4.5; 6; 7.5 and 9 litres for the full flush. The TECE cistern proves its worth even when the toilet bowl or drain pipe is not designed for the lower flushing volume.

With the new TECE valve, the removal of a throttle also enables the flushing flow to be subsequently increased. The resulting higher performance provides a thorough flush for every bowl.

6

TECE Spültechnik

Installation variants of the 8 cm TECE cistern

TECEprofil toilet module to be mounted in metal frame walls or in front of solid walls

Wet construction cistern TECEbox for wall-hung toilets,sound-suppressed

Wet construction cistern TECEbox basic for pedestal toilets

Wet construction cistern TECEbox for wall-hung toilets

The 8 cm TECE cisternThe builder is pleased about a wide range of push plates, and the fitter enjoys the easy installation and reliable function of the technique behind the wall. Thus, both are pleased about the flushing technology provided by TECE.

The cistern has been developed in particular for the requirements of the installation in 8 cm masonry. The construction is based on German know-how and is the result of many years of experience of TECE in the field of flushing technology. The TECE cistern is a completely pre-mounted cistern – simply connect it and that’s it! Water saving dual flush system (4,5 / 3 litres, 6 / 3 litres or 9 / 3 litres) is possible in an extreme noise reduction 9 litre safety tank. Therefore there is enough water when it matters most. (Cannot be used with toilet eletronics and flush mounted toilet push plates.)

Saving water is all very fine, but thorough flushing is also important.

n The TECE cistern can be set to a high flush volume (9 litres) if required. This means that reliable flushing of the drainpipes is ensured even under less than ideal conditions.

n Dual flush option to save water (4.5 / 3, 6 / 3 or 9 / 3 litres).

n Single flush option: Complete certainty with every flush: choice of either 4.5 / 6 or 9 litres.

n Residual water volume for additional flushing power, can be used for immediate after flush when required.

Adjustment of the flushing volume at the drain valve.

Depending on the condition (waste water system, toilet ceramics, et cetera), different flushing volumes can be set on the drain valve.

The 8 cm TECE cistern

7

The toilet module range comprises four mounting variants with TECE cisterns for all conventional mounting situations. The range includes a bidet and washstand module.Call us and we will advise you on the easy sanitary connection with TECEflex multi-layer composite pipes or on our range for floor-level shower channels “TECEdrainline”.

The customer can chose from a wide range of TECE push plates

from the TECE push plate programme. For more information, please refer to the brochure „Toilet push plates for TECE cistern“.

TECEloop

WC-Armaturen

TECEsquare

The 8 cm TECE cistern

TECEambia

TECEplanus

TECEbase

8

WC geronto module – even more safety support arms can now be usedA modular system with different safety support arm brackets has now been incorporated in the universal module for creating barrier-free WCs

Depending on the manufacturer of the safety support arm used, the module can be extended through purchase of the appropriate bracket. As a result,

TOTO and TECE: Partners in WC hygiene The German housing technology system provider TECE and the Japanese sanitary ceramics manufacturer TOTO have concluded a strategic partnership

TOTO, Japan’s leading manufacturer of sanitary ceramics and the world market leader for washlets (toilets with a bidet function), has developed a wall-mounted washlet specially for the European market that will be marketed in different model versions in Germany and Europe. The search for a competent partner for flushing technology with an extensive sales network led to TECE. TECE has now developed a module with a concealed cistern for the top model among TOTO’s washlets – Neorest. The prefabricated unit has automatic flushing, which can be directly connected to the washlet. The WC modules are from TECE. The ceramics and motor with special actuation on the basis of the TECEloop push plate will be sold by TOTO Germany GmbH, Bottrop via specialist wholesalers.

TECE standard module with upgrade set for TOTO Washlet

TECEprofil

practically all safety support arms can now be installed in accordance with standards. The module is of course compatible with all TECE WC electronics (battery and mains variants). The preset seat height is 48 cm.

The module can be installed in front of a solid wall, in flush-mounted profile

walls or within the TECEprofil system. Conduits installed in

the module considerably simplify the cabling needed for electronic

flush actuation; with the proven TECE concealed cistern for actuation from the front, fully preassembled and sealed. (Available from mid 2009)

New TECEprofil expert opinion on sound proofing

A current expert opinion on sound proofing for a TECEprofil installation wall reveals that TECEprofil meets sound proofing standard DIN 4109 for the construction of partition walls in hotels, schools and hospitals. The assessed sound attenuation value was measured in accordance with DIN 4109 for a TECEprofil partition wall including sanitary installations. A sound attenuation value of R’w = 52 dB was determined.

9

Shell set for TOTO Washlet and TECE standard modulesfor TOTO Washlet, including sound-insulated wall disk for water connection, power connection with retaining plate and hollow-wall box shell set(Available from mid 2009) (Fig. left)

Shell set for other washlets and TECE modulesShell set for the mounting of a washlet on TECEprofil dry-wall modules; suitable for Balena 8000 and extension elements 4000/6000(without fig.)

TECEprofil levelling feet, extended designfor installation in TECEprofil modules with floor extensions of min. 20 cm and max. 50 cm. Zinc-coated design with TECEprofil module foot(without fig.)

Sound proofing kit TECEprofil for angle bracketsfor sound proofing of the angle bracket on the body shell

TECEprofil innovations

Special module for TOTO Neorest washletThe module can be installed in front of a solid wall, in flush-mounted profile walls or within the TECEprofil system. Remote actuation via the washlet is possible. Including hollow-wall box and sound-insulated wall disk. (Available from mid 2009)

There‘s a system behind this shower channel

Bathroom planning with design highlights from TECETECE is now providing bathroom planning data for TECEdrainline shower channels and toilet push plates. This naturally includes the design highlights such as the TECEloop collection. Data can be downloaded via the SHK industry portal at www.shk-branchenportal.de

New! TECE Drainbase sound proofing mat from the roll

For installation with TECEdrainline shower channels. Installation sound level with normal shower setting 22 dB. The mat is extremely robust and scarcely yields, so subsequent lowering of the screed is prevented.

Care and cleaningThe channel body is made of stainless steel and does not have any gaps and screws; it is easy to clean and thus especially hygienic.

Shower channels have been available on the market for around three years and are becoming more and more popular with bathroom planners, architects and building clients.

TECEdrainline was one of the first marketable systems and quickly became the market leader in this segment. The reason is simple: 35 years of channel experience and just as many years of hygiene expertise – from the industrial kitchen segment – meant that TECEdrainline was a sophisticated product from the start, tailored to the needs of today’s fitters.

Seven different designs with polished or brushed surfaces are available, together with a basin that can be tiled. Four outlets with different drain capacities and installation heights permit additional usage options.

nPatterned grates in stainless steel, matt and bright

nStraight lenghts: 700, 800, 900, 1,000, 1,200 and 1,500 mm

nAngled channels in 900, 1000, 1200, 1500 mm lengths

nCustom lengths up to 1500 mm can also be supplied at short notice

TECEdrainline modular system

TECEdrainline shower channel always consists of three components: a design grating or a tileable basin, a channel and a drain.

DIN 4109/A1SST II

Cer

tifie

d sound insulation

TECEdrainline

New! vertical drain for TECEdrainline (Available from mid 2009)

10

TECEstandardline: The construction kit for channel drainageTECE stock programme for drainage channels reduces delivery time and brings down the costs

With Standardline, TECE offers an assortment of stainless steel channels which are in stock, and thus available at short notice. Based on the modular principle, fitters and planners can select the components for their drainage solution and order them from the wholesaler. The delivery arrives in just a few days – and can be sent directly to the construction site, if required.

The TECEstandardline range is tailored to use in projects. A fire-protection solution is included in the programme as well. For the various channel widths and lengths, TECE offers different covers for various purposes, such as showers, saunas or industrial kitchens. There are no hollow areas or edges on the channels made of stainless steel V2A, so the channels can be cleaned quickly and thoroughly.

TECEstandardline

TECEdrain innovationsFire-protection floor drains TECEdrain FireStop in DN 50 made of cast iron in DN 50

n Horizontal and verticaln Drainage capacity from 1.0 l/sn Primed and epoxy-coatedn Applied for general building permission (abZ) respectively general test certificate (abP)

(Available from April 2009)

11

nTECEflex installation system

nTECEprofil curtain wall technology

nTECEbox wet construction cistern

nFlush handles – turn, don‘t press

n TECEdrainboard shower elements

nTECEregister/systembau, prefabricated installation channels and walls

nTECEdrain made of: nPlastic n Cast iron nStainless steelnFeed pipes nSpecial channels

n TECElogo push fittings

nTECE cisterns

nTECE push plates

nTECEdrainline shower channel programme

nTECEstandardline - the modular system for drainage channels from stock

nTECE grease separators

nLifting pumps

Company

Name

Function

Street/no.

Postal code/city

Country

Phone/fax

Email

Request documentes from TECE by fax +49 2572 928 204

CD with tender texts

n DATANORM nGAEB nWord

Calculation software

n TECEdendrit for TECEflex/TECElogo/TECEquickpipe

n TECEplasorit for TECEprofil

n FAS calculation software (only from the Internet)

n TECE catalogue from sales rep nTECEbasika catalogue from sales rep

n Sales visit requested (please specify full address)

nI have a project, please give me a call

TECEflex – the installation system with unique flexibility for all fields of application – now also in RussiaThanks to its safe axial pressing technology, TECEflex is approved for compressed air and gas installations, as well as sanitary installations, and is therefore one of the most flexible systems on the market. It even meets the strict selection criteria of the Russia testing institutes and at the end of 2008 was the only composite pipe system also approved in Russia for gas application.

The background to the decision by the Russian institutes is the poor state of many Russian gas lines. The need for renovation is therefore very high. Previously, only steel pipes were approved for this in Russia. The welding of the pipes is difficult and can only be carried out by qualified experts. As a result, the authorities were looking for an installation system that is easy and quick to use but still foolproof. The Russian test engineers were already aware of the advantages offered by composite pipe systems from potable water installations. Because of the high safety standards for gas installation in Germany, they therefore concentrated on the systems approved here for gas installation, and ultimately chose TECEflex. Because TECEflex uses the same brass fittings for gas and all other applications, storage is extremely easy and the risk of mix-ups on the construction site is practically zero. This unique selling point was the deciding factor.

TECEflex innovations: The new gas safety fitting combines a type-K gas flow detector with a thermal shut-off unit in a single com- ponent. The real highlight: The fitting can be installed horizontally and vertically.

Raz Faz! The practical TECEflex battery-operated tool for expanding and pressing to dim. 32 mm, as a set in a case.

System adapters to TECElogoExisting TECEflex potable water and heating installations can now be extended with the TECElogo push-fitting system.

TECEflex

DS

001

00

2 3

9 a

TECE GmbHExport DepartementHollefeldstraße 5748282 EmsdettenGermanyPhone: +49 2572 928 999Fax: +49 2572 928 204E-Mail: export@tece.deInternet: www.tece.de

#

TECE ISH Trade fair videoAfter the ISH, you can take another look at the trade fair inno-vations and highlights from the TECE stand at your leisure. From Monday March 16, you will find our trade fair video on our website “www.tece.de“.