technical-assistance to developers - energy
TRANSCRIPT
![Page 1: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/1.jpg)
Technical-Assistance to Developers
Testing and Analytical Assistance
May 18, 2009Tommy Rockward/Rod Borup/Fernando Garzon
(Assistance provided by entire LANL FC team)
This presentation does not contain any proprietary, confidential, or otherwise restricted information
FCP_02_Rockward
![Page 2: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/2.jpg)
Overview• Timeline
– Start: 10/03– End: ongoing– % complete: N/A
• Budget– “Technical Assistance to
Developers” funded at $570K/y
• DOE share: 100%• Contractor share: N/A
– Most DOE-directed effort under the parent task generates proprietary data
– FY09 funding: $570K/y
• Barriers– A. Durability– B. Cost– C. Electrode performance
• Partners/Collaborators– Full list Available
![Page 3: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/3.jpg)
Technical Assistance to Developers
This task supports Los Alamos technical assistance to fuel-cell component and system developers as directed by the DOE. This task is expected to include testing of materials and participation in the further development and validation of a single cell test protocols. This task also covers technical assistance to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Freedom Cooperative Automotive Research (FreedomCAR) Fuel Cell Technology Team. This assistance includes making technical experts available to the Tech Team as questions arise, focused single cell testing to support the development of targets and test protocols, and regular participation in working and review meetings.
In addition, LANL scientists interacted with several of the ‘solicitation winners’ outside and/or beyond any proposed collaborations.
![Page 4: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/4.jpg)
Technically-Assisted Collaborators/Partners
• USFCC– Single Cell Task Force– Durability Task Force
• Working Group 12 Doc: ISO 14687 Hydrogen Quality Standard
• Cabot Fuel Cells• W.L. Gore• SGL Carbon• BASF • CIDETEC - Centro de
Tecnologías Electroquímicas • Palmetto FC Technologies• Ca Fuel Cell Partnership• DANA Corp.• Smart Chemistry Corp.
• FreedomCAR (GM, Ford, and Daimler-Chrysler)
• Nuvera• Brookhaven National Laboratory• University of New Mexico• Oak Ridge National Laboratory• Argonne National Laboratory• Sandia National Lab• University of Illinois Urbana-Champaign• University of California – Riverside• University of California – Santa Barbara• Fuel Cell Technologies• General Motors• NREL (National Renewable Energy Lab)• Virginia Polytech and State University• NIST (National Institute of Science and
Technology)
![Page 5: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/5.jpg)
Case Western Reserve University
Task: Investigate performance concerns with commercially available CCMs
Approach: 1.CWRU provided an MEA for testing at LANL’s facility for comparison with their results)2.Summary and email-exchange of findings
-0.005
0
0.005
0.01
0.015
0.02
0.025
0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45
Hydrogen Crossover Comparison
Curr
ent D
ensi
ty/ A
*cm
2
Voltage/ vs. HRE
CWRU_G01 MEA
cathode to anode
anode to cathode
LANL 2-mil MEA
![Page 6: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/6.jpg)
0
0 . 2
0 . 4
0 . 6
0 . 8
1
0 0 .2 0 . 4 0 . 6 0 . 8 1
C a s e W e s t e r n R e s e r v e U n i vG 0 1 _ P o l a r i z a t i o n C u r v e s
Cel
l Vol
tage
/ Vol
ts
C u r r e n t D e n s i t y / A * c m ^ 2
c a t h b y - p a s s e d
T : 8 0 o C , 1 0 0 % R H P : 2 5 /2 5 p s i g
1 0 0 % R H
T : 6 0 / 6 0 / 6 0 o CP : 3 . 7 / 3 . 7 p s i g
• Significantly higher H2 cross-over measured in the CWRU sample (3-5 times)• Low OCV typical of high H2 cross-over• CWRU cell operated with descent performance even at low T, pressure and/or RH
Case Western Reserve University
![Page 7: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/7.jpg)
Los Alamos presented their results on the “Performance and Durability of PEM Fuel Cells Operated at Sub-Freezing Temperatures”
Nuvera PEM Freeze Workshop
Los Alamos demonstrated loss in cathode catalyst surface area with repeated isothermal cold starts at sub-freezing temperatures. This loss was a function of MEA preparation method.
Los Alamos coordinated a breakout session and provided valuable input on single cell testing and location of ice formation.
![Page 8: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/8.jpg)
HyCell Energy, LLCPedicab Engineering Study
Task: Provide Fuel Cell expertise/guidance
Approach: 1.Research the existing FC stack and its viability/compatibility for the intended purpose.2.LANL scientists will summarize their findings and recommendations
![Page 9: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/9.jpg)
Mercury Intrusion Porosimetry (MIP) Gas Diffusion Backing Measurements
Task: Provide Mercury Intrusion Porosimetry (MIP) results for several different manufactured GDL backings
Approach: 1.14 samples from 6 manufacturers were provided2.LANL scientist conduct measurements and provide results
![Page 10: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/10.jpg)
Mercury Intrusion Porosimetry (MIP) Gas Diffusion Backing Measurements
![Page 11: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/11.jpg)
NIST-Metrology Group
Task: Investigate cell-to-cell performance with a commercially available CCMs and/or possible in-house testing issues.
Approach: 1.LANL scientist visited test site to observe test facility and testing /analytical equipment2.LANL scientist provide testing guidance as necessary; pointing out best test practices3.NIST will provide a CCM sample for testing at LANL’s facility4.Summary and report to be sent to NIST
![Page 12: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/12.jpg)
NIST-Metrology Group
NIST Visit: 1.Testing and analytical equipment was adequate2.Gases: H2/Air/N2: concerned with quality of gases3.Limited to daytime testing 4.Cell performance decreased after each reconditioning
![Page 13: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/13.jpg)
-0 .0 1
-0 .0 0 5
0
0 .0 0 5
0 .0 1
0 0 .5 1 1 .5
N IS T S a m p le - - -A n o d e C VT : 3 0 /3 0 /3 0 o C ; P : 3 .7 /3 .7 p s ig
H 2 /N 2 : 5 0 0 s c c m ; 2 0 m V /S
B
V o lta g e / v s H R E
-0 .0 1
-0 .0 0 5
0
0 .0 0 5
0 .0 1
0 0 .5 1 1 .5
N IS T S a m p le -- - C a t h o d e C VT : 3 0 /3 0 /3 0 o C ; P : 3 .7 /3 .7 p s ig
H 2 /N 2 : 5 0 0 s c c m ; 2 0 m V /S
B
V o ltag e / vs . H R E
• Initial CVs show normal behavior with little to no H2 cross-over; • Low cross-over further confirmed• EASA nearly identical as expected considering identical Pt loadings
NIST-Tests Results
![Page 14: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/14.jpg)
NIST-Results cont’d
0
0 .1
0 .2
0 .3
0 .4
0 .5
0 .6
0 .7
0 .8
-2
0
2
4
6
8
1 0
1 2
0 5 1 0 1 5 2 0 2 5
N IS T _ S a m p le 0 1 _ b re a k in
Cel
l Vol
tage
Total Current/ A
mps
T im e / h o u r s
Initial break in results were not as we would of expected, the break-in could not be carried out fully. After hours of undesirable results, we disassembled and…
![Page 15: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/15.jpg)
NIST-Results ProblemA hole developed sometime during the testing
Possibilities: 1.Location of hole may suggest materials issue; typical hole formations occur at the gas inlets.2.Pin-hole formations possible during assembly of CCM possible when utilizing paper gas diffusion backings. (not likely)
![Page 16: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/16.jpg)
Evaluating Standard Procedures
LANL used three different protocols (EU, JARI, USFCC/LANL). Korea and China to be tested after protocols are received.
Testing at the low Pt loadings (DOE targets) are continuing until other protocols are received. These results reflect anode and cathode loadings of 0.1 & 0.2 mg Pt/cm2, respectively.
![Page 17: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/17.jpg)
Fuel Cell Nano-Catalysts Materials
• New catalysts such as Pt-Pd core shell• Higher Pt loading Pt-C• Unsupported Pt-C
• Composition• Crystal Structure• Crystal size distribution• Reactivity
Pt small crystal model
![Page 18: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/18.jpg)
Characterization Techniques
• Microscopic– TEM, ESEM, AFM-STM, X-Ray Microscopy, Neutron
Imaging (NIST)
• Macroscopic– Structure
• XRD, XAFS (Stanford,ANL)– Chemical analysis
• XRF, Laser Ablation ICP-MS, XANES, EDX
• Surface and Thermodynamics– Hg Pore, BET Gas Adsorption, TGA-(TBD) DSC-MS
![Page 19: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/19.jpg)
GDL Imaging (ESEM)
• Ex situ monitoring of ice formation• Control of PH2O(0-100% RH) and T (-10°C
to +40°C) during imaging• Freeze/thaw cycling at various RH while
imaging
Untreated GDL (SGL) Ice (T = -2oC; PH2O = 3.8torr) Water (T = 3.7oC; PH2O = 4.63 torr)
• Mount samples in cross-section (stage being machined)
• Examine interfaces during freeze/thaw cycling (GDL/MEA; catalyst/membrane)
![Page 20: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/20.jpg)
X-ray Fluorescence Spectroscopy
• Nondestructive– Insensitive to bounding environment – No sample preparation– Sensitivity to μg/cm2
• Spatial resolution with mapping stage• Use Fundamental Parameters Model for matrix
corrections– Fit multilayer systems also
• Accurate catalyst loading and impurity detection
![Page 21: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/21.jpg)
Diffraction and X-ray Fluorescence, Hg Porosimetry
Crystal structure, Pt particle size, Alloy composition Pt/C ratio, Pt loading, impurities catalyst loss
Surface area and pore size distribution
![Page 22: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/22.jpg)
X-ray Whole Pattern Fitting Method
• Convolute instrument broadening, crystallite scattering, crystallite size and strain and background to calculate the diffraction pattern
• Perform least squares fit iteratively to minimize difference between observed and calculated pattern
• Programs– SHADOW, Snyder and Howard– GSAS, Von Dreele and Larson
• Very accurate unit cell determinations• Amorphous material fractions may estimated• Sample displacement errors can also be corrected
![Page 23: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/23.jpg)
Warren-Averbach Fourier Analysis
• Remove instrumental effects by Fourier deconvolution• Represent X-ray peak profiles in reciprocal space by Fourier series
• Real (cosine) coefficients are used in Warren Averbach analysis to separate size and strain
– Approach gives area weighted crystallite sizes• Bertaut demonstrated second derivative of the Fourier coefficients
contained the crystallite size distribution• MudMaster-Eberl (direct transform) WINFIT-by Krumm PSF fitting
F(s) = AL cos(2π(s − s0 )L)+ BL sin(2π(s − s0 )L)}{L=−∞
∞
∑
AL = ALsizeAL
strain
s = 2sinθλ
![Page 24: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/24.jpg)
Electrochemical Surface Area Loss
• No net mass loss of catalyst – Total loadings
the same before and aftercycling confirmed by XRF
• Catalyst particle growth?
0
20
40
60
80
100
120
0 500 1000 1500 2000
# of Potential Cycle
EC S
urfa
ce A
rea
/ mC
oul
60 C (1.0 V)
80 C (1.2 V)
60 C (1.2 V)
80 C (1.0 V)
![Page 25: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/25.jpg)
X-Ray Whole Pattern Fitting
• ETEK Pt 20% -C sample ~20 Å vol weighted size• a=3.9261 (0.00068)Å
![Page 26: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/26.jpg)
25 50 75 100 125 150
Crystallite Size Pt-Cathode Cycled 0.1-1.2 V
Size Angstroms•Particle size distribution- red curve and cumulative distribution-blue curve•For cathode sample cycled to 1.2 volts•Crystal size 60 Å average from distribution•Crystal size 78 Å average volume weighted•Max crystal size ~150Å
![Page 27: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/27.jpg)
X-ray CT Microscopes
mm μm nmLength scale
1 mm (1000 μm) 1 μm ( 1000 nm)
Imaging resolution with length scale from several mm to sub 30 nm
MicroXCTTM
nanoXCTTM
1 nm
![Page 28: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/28.jpg)
MicroXCT™3D X-ray Microscope
• Cross-sectioning soft materials for SEM/TEM is difficult
• microtoming or freeze fracturing usually employed
• Dehydration of samples in vacuum systems is also a problem
• CT “Virtual cross sectioning” preserves delicate microstructures
• Large numbers of “cross sections” may be studied
• W target used for good penetration no thinning required
![Page 29: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/29.jpg)
Differences Between Conventional CTs and Xradia CT
Conventional CTs: Simple Projection geometry with Flat panel detector to achieve magnification and resolution
Xradia proprietary optics with high resolution & high contrast detector system
High Resolution & High Contrast
![Page 30: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/30.jpg)
Comparison of Nafion®
Fuel Cell Membranes(#1, #2 and #3).
Fig. 1
Fig. 2
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 2
Fig. 2
Fig. 2
Fig. 2
Fig. 2
Fig. 1
Fig. 1
Fig. 1
Fig. 1
Fig. 1
Membrane 1. unused fuel cell membrane
Membrane 2. went through a cycle test until failure.
Membrane 3. went through a cycle test and start stops.
![Page 31: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/31.jpg)
SGL GDL Imaging
![Page 32: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/32.jpg)
SGL GDL Microporous Layer
![Page 33: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/33.jpg)
Toray GDL
![Page 34: Technical-Assistance to Developers - Energy](https://reader033.vdocument.in/reader033/viewer/2022061523/629f5ac862c2472fb623e74a/html5/thumbnails/34.jpg)
LANL MEA Fabrication ProcessHands-on PEM Fuel Cell Testing
Several Demonstrations using Different Analytical TechniquesMultiple Fuel Cell Presentations presented by LANL Scientist
LANL Fuel Cell Training Class October 2008
Participants from industries, national labs, and universities
Upcoming 2009 Class TBAAsk me about registering