technical committee meeting

IEEE RAS Technical Committee on Semiconductor Manufacturing Automation http://xs3d.kaist.edu/TC-SMA

IEEE Robotics and Automation SocietyIEEE Robotics and Automation Society

Technical Committee (TC) on Semiconductor Manufacturing Automation Technical Committee (TC) on Semiconductor Manufacturing Automation

Technical Committee MeetingAt the 5th Multidisciplinary International Scheduling Conference (MISTA 2011)

Venue: Xavier Conference Room, Tempe Mission Palms, Phoenix, AZ, USA

Time: 12:35 – 12:50 pm, Thursday, August 11, 2011After the session S7A entitled “Semiconductor Scheduling”


Meeting Overview

• Review of TC facts

– Face-to-face meetings

– TC data on membership, etc.

• TC activities

– Publication involvement

– Conference involvement

• Discussion topics

– Conferences at which to hold meetings (academic/industry)

– Special issue for 2013 associated with IEEE CASE 2012

– Others?

2


3

Technical Committee (TC) Brief Data

• URL: http://xs3d.kaist.edu/TC-SMA

• Founding Date: August 1, 2001

• Scope:– To promote basic and applied research in semiconductor

manufacturing and automation

– To provide a forum for exchanging ideas among semiconductor manufacturing researchers and engineers

– To facilitate related scientific publications and events (such as special conference sessions, workshops, symposia, and special journal issues)


4

Face-to-Face TC Meetings• Sept. 25, 2006, Tokyo (IEEE/SEMI Int’l Symposium on Semiconductor Manufacturing)• Oct. 9, 2006, Shanghai (IEEE/SEMI Int’l Conference on Automation Science and Engineering)• April 2007, Roma (IEEE Int’l Conference on Robotics and Automation)• Sept. 2007, Scottsdale (IEEE Conference on Automation Science and Engineering) • August 2008, Washington DC (IEEE Conference on Automation Science and Eng.)• October 2008, Tokyo (International Symposium on Semiconductor Manufacturing)• August 2009, Bangalore, India (IEEE Conference on Automation Science and Eng.) • December 2009, Austin, TX, USA (2009 MASM within WinterSim 2009)• July 2010, San Francisco, USA (21st Annual IEEE/SEMI Advanced Semiconductor

Manufacturing Conference)• August 2010, Toronto, Canada (6th IEEE Conference on Automation Science and Eng.)• August 2011, Phoenix, AZ, USA (5th Multidisciplinary International Scheduling Conf.)

• NEXT MEETING: December 2011, Phoenix, AZ, USA (2011 MASM - Modeling and Analysis of Semiconductor Manufacturing conference, within WinterSim 2011)


5

Most Recent TC Meeting (during MISTA 2011)

Attending (from left to right): Detlef Pabst (Engineer, Global Foundaries, PhD Candidate ASU, USA), Felix Cheng (PhD Candidate, ASU, USA),

Todor Dimitrov (Engineer, Franhofer IOSB, USA), Tobias Uhlig (PhD Candidate, Dresden University of Technology, Germany), John Fowler (Professor, ASU, USA), Ken Fordyce (Engineer, IBM, USA), Lars Monch (Professor, University of Hagen, Germany), James Morrison (Professor, KAIST, South Korea), Ketan Khowala

(Engineer, Apple, PhD Candidate, ASU, USA)

Please send e-mail to [email protected] for updates to the caption.


TC Meeting (during IEEE/SEMI ASMC 2010)

Attending (from left to right): Zubin Mevawalla (Ph.D. candidate, Georgia Tech), Jan Rothe (Global Foundries),

Haim Albalak (Head, Tefen), James Morrison (Prof., KAIST), Brett Williams (Engineer, ON Semiconductor), Lynn Yuwen Zhang, Ph.D. (Sr. Engineer, Intel),

Darryl Peters (Confluence), Fan-Tien Cheng (Prof., National Cheng Kung University), Dave Gross (Director, Global Foundries), Claude Yugma (Prof., Ecole

Nationale Superieure des Mines de Saint-Etienne), Agnes Roussy (Prof., Ecole Nationale Superieure des Mines de Saint-Etienne), Kyungsu Park (Ph.D. candidate,

KAIST), Gyoungwon Park, Ph.D. (Manager, Finisar)

TC Meeting (during IEEE CASE 2010)

Attending (from left to right): Wei (Victor) Feng (Ph.D. candidate, Tsinghua University) , Li Zheng (Prof., Tsinghua University), Jingshan Li (Prof., University of Wisconsin-Madison),

Chandresh Mehta (Prof., University of Michigan), Gentleman #1, Andrea Schirru (Ph.D. candidate, University of Pavia, Italy), Fan-Tien Cheng (Prof., National

Cheng Kung University), James Morrison (Prof., KAIST), Gentelman #2, Gentleman #3, Naiqi Wu (Guangdong University of Technology), Cpt. Younghun

Ahn (MS candidate, KAIST), Kyungsu Park (PhD candidate, KAIST)

Most Recent TC Meeting (during MISTA 2011)

Attending (from left to right): Detlef Pabst (Engineer, Global Foundaries, PhD Candidate ASU, USA), Felix Cheng

(PhD Candidate, ASU, USA), Todor Dimitrov (Engineer, Franhofer IOSB, USA), Tobias Uhlig (PhD Candidate, Dresden University of Technology, Germany), John Fowler (Professor, ASU, USA), Ken Fordyce (Engineer, IBM, USA), Lars Monch (Professor, University of Hagen, Germany), James Morrison (Professor, KAIST,

South Korea), Ketan Khowala (Engineer, Apple, PhD Candidate, ASU, USA)

Next TC Meeting (during MASM 2011)


7

Second Row (from left): Prof. Jiangshan Li (U Kentucky), a gentleman coming late, Prof. Oliver Rose (Dresden U Tech., Germany), Prof. Leon McGinnis (Georgia Tech), Kan Wu

(Georgia Tech), President van der Meulen (Blueshift), General Manager David Aires (Intel), Vice President John Behnke (Spansion), Lance Rist (ISMI/SEMATECH),

Naiping Keng (Intel), First Row (from left): Deputy Director Chen-Fu Chien (TSMC, Taiwan), Mike Zhang (Spansion), Sr.

Director Eric Englhardt (Applied Materials), Prof. Fan-Tien Cheng (NCKU, Taiwan)

TC Meeting (during IEEE CASE 2007)TC Meeting (during IEEE CASE 2008)

TC Meeting (during ISSM 2008)

First Row (from left): Gentleman #1, Gentleman #2, Prof. James R. Morrison (KAIST), Mike Zhang (Sr.

Manager, Spansion), Peter van der Meulen (Chairman and Founder, Blue Shift Technologies), Gentleman #3, Prof. Shi-Chung Chang (National Taiwan University)

Please send e-mail to [email protected] to identify yourself (we’ll update the photo caption).

TC Meeting (during IEEE CASE 2009)

First Row (from left): Gentleman #1, Prof.Jingshan Li (U Kentucky) , Prof. Fan-Tien Cheng (NCKU, Taiwan), Prof. James R. Morrison (KAIST), Prof. Min-Hsiung Hung (National

Defense U, Taiwan), Prof. Shi-Chung Chang (National Taiwan U), Prof. Argon Chen (National Taiwan U), Prof. Chih-Min Fan

Please send e-mail to [email protected] to identify yourself (we’ll update the photo caption).


8

Membership• 258 TC members• All the major institutes and companies across Americas, Europe, and

Asia• New member recruiting:

– August 2008, GOLD (Graduates of the Last Decade) lunch – April 2007, GOLD (Graduates of the Last Decade) lunch

• Nominations and Awards:– Dev Pillai (Intel Fellow), T-ASE Advisory Board, 2007– Adar Kalir (Intel), T-ASE Associate Editor, 2007– Chen-Fu Chien (TSMC & Tsinghua U), T-ASE Associate Editor, 2007– Mike Tao Zhang, IEEE RAS Early Career Award in Robotics and

Automation, 2008 – Meng-Chu Zhou, nominated for IEEE RAS Distinguished Lecturer, 2009– Meng-Chu Zhou, selected as Sr. Editor of IEEE T-ASE, 2009


9

Committee BoardHonorary Chairs • Dr. Simon Yang, Senior Vice President & Chief Technology Officer, Chartered Semiconductor Manufacturing Co. • Dr. Douglas Chen-Hua Yu, Senior Director, Advanced Module Technology Development Division, TSMC • MuDer JENG , IEEE Fellow, Professor, Department of Electrical Engineering, National Taiwan Ocean University• MengChu ZHOU, IEEE Fellow, Professor, Dept of Electrical and Computer Eng, New Jersey Institute of Technology Co-Chairs• Thomas Wen-Yao CHEN, Director, Technology System Integration Division, TSMC• Mike Tao ZHANG, VP Tianwei New Energy Holdings & Executive Vice President, US-China Green Energy Council• James R. Morrison, Assistant Professor, Dept of Industrial and Systems Engineering, KAIST, South Korea

Academy Chair: Prof. Stanley B. Gershwin, Dept of Mechanical Engineering, MITIndustry Chair: Dave Gross, Director, Global Manufacturing Systems Technology, Advanced Micro Devices (AMD)Membership Chair: Dr. Chen-Fu Chien, Deputy Director, Industrial Eng., TSMCConference Chair: Prof. Shi-Chuang Chang, Dept of Electrical Engineering, National Taiwan UniversityPublication Chair: Prof. Ruey-Shan Andy Guo, Chair, Dept of Business Administration, National Taiwan UniversityRegional Chair, China: Prof. Han Ding, Cheung Kong Chair Professor and Director, Advanced Electronic Mfg Center,

Shanghai Jiao Tong Univ.Regional Chair, Europe: Dr. Arieh Greenberg, Senior Principal, QimondaRegional Chair, Israel: Dr. Adar Kalir, Staff Engineer, Intel Corporation Regional Chair, Japan: Kenji Miyake, Chief Technology Officer, GEN Inc. Regional Chair, Korea: Prof. Tae-Eog Lee, Dept of Industrial Eng, Korea Advanced Institute of Science and TechnologyRegional Chair, Taiwan: Prof. Shi-Chung Chang, Dept of Electrical Eng, National Taiwan UniversityRegional Chair, U.S.A.: Prof. John W. Fowler, Dept of Industrial Engineering, Arizona State University


10

Publication Involvement• Special Issue on Automation Science and Engineering, IEEE Robotics and Automation

Magazine– Mike Tao Zhang (Guest Editor); Published in Dec 2006; 3 articles on semiconductor manufacturing

• Special Issue on eManufacturing in the Semiconductor Industry, IEEE Transactions on Automation Science and Engineering (T-ASE)

– Thomas Chen, Mike Tao Zhang, Chen-Fu Chien, John Fowler, and George Shanthikumar (Guest Editors); 37 papers submitted; published in Oct 2007

• Special Issue on Equipment and Operations Automation in the Semiconductor Industry, IEEE Transactions on Automation Science and Engineering (T-ASE)

– Chen-Fu Chien, Stephane Dauzere-Peres, Milind Dawande, Han Ding, James Morrison, Jeff Pettinato, Jingang Yi (Guest Editors)

– 32 papers submitted; published Jan 2011

• Special Issue on Automation in Green Technology for IEEE Transactions on Automation Science and Engineering (T-ASE)

– Jingshan Li, James R. Morrison, Mike Tao Zhang, Masaru Nakano, Stephan Biller, Bengt Lennartson (Guest Editors)

– Publication scheduled October 2012

• Planning a Special Issue on Automation for Next Generation High Technology Manufacturing (with a focus on 450 mm wafer manufacturing)

– In conjunction with IEEE CASE 2012– Publication target early 2013


11

Conference Involvement• IEEE Conference on Automation Science and Engineering, Shanghai, 2006

– Invited Session on Semiconductor Manufacturing: Fan-Tien Cheng, CC Huang, Naiqi Wu, and Mike Tao Zhang (Session Co-Chairs); 14 papers accepted

– Tech tours to Intel and Semiconductor Manufacturing Int'l Company (SMIC): Mike Tao Zhang (Organizer); 30 people joined

– Tutorial/Workshop on eManufacturing for the Semiconductor Industry: Fan-Tien Cheng, Min-Hsiung Hung, Jonathan Chang, and Mike Tao Zhang (Organizers)

• 18th IEEE/SEMI Advanced Semiconductor Manufacturing Conference (ASMC), Stresa, Italy, June 11-12, 2007– Dave Gross (Conference Co-Chair).

• IEEE/SEMI eManufacturing Symposium, Taipei, Taiwan, June, 2007 – Thomas Chen and MuDer Jeng (Steering Committee members)

• IEEE Conference on Automation Science and Engineering (IEEE CASE 2007), Phoenix, USA, Sept 2007– Mike Tao Zhang (Program Chair); Intel Fellow Dev Pillai (Keynote Speaker)– John Fowler, Chen-Fu Chien, Oliver Rose, and James Wuerfel (Co-Chairs): The 2007 Int’l Conference on Modeling and

Analysis of Semiconductor Manufacturing (MASM 2007) – as a part of IEEE CASE 2007

• 4th IEEE Conference on Automation Science and Engineering, Washington DC, USA, August 2008. – Mengchu Zhou (General Chair). Mike Tao Zhang (Steering Committee member)

• 2008 International Symposium on Semiconductor Manufacturing, Tokyo, Japan, Oct.2008.– Shi-Chung Chang (Program Committee)

• Joint symposium of "AEC/APC-Asia 2008" and "e-Manufacturing & DFM Symposium 2008", HsinChu, Taiwan, Nov. 2008.

– Thomas Chen (Steering Committee member)

• 4th Int’l Conference on Modeling and Analysis of Semiconductor Manufacturing, Miami, Florida, USA, Dec. 2008. – John Fowler and Chen-Fu Chien (Conference Chairs). Mike Tao Zhang (Int’l Advisory Committee member).

• Joint 20th Advanced Semiconductor Manufacturing Conference and 2009 International Symposium on Semiconductor Manufacturing, Berlin, Germany, May 2009.

– Shi-Chung Chang (Program committee)


12

Conference Involvement• 10th International Conference on Automation Technology (Automation 2009), Tainan (Taiwan), June 2009.

– Meng-Chu Zhou and Mike Tao Zhang (Int’l Advisory Committee members)• 5th IEEE Conference on Automation Science and Engineering, Bangalore, India, Aug 2009

– Mike Tao Zhang, MengChu Zhou (Steering Committee). Tae-Eog Lee (Track Co-Chair), James Morrison (Track Co-Chair).– Shi-Chung Chang, MuDer Jeng, Wai Kin Victor Chan, Shengwei Ding, Fei Qiao, Naiqi Wu, Jingang Yi (Program Committee).– Shi-Chung Chang and Argon Chen, organize special session on Yield Symptom Identification

• 2009 International Conference on Modeling and Analysis of Semiconductor Manufacturing (MASM) , Austin, Texas, Dec 2009– Shekar Krishnaswamy, Scott Mason (Conference Organizers)– Lars Mönch, Stephane Dauzere-Peres, Oliver Rose (Track Chairs)

• IEEE International Conference on Robotics and Automation, Anchorage, Alaska, May 2010– James Morrison (Program Committee)

• 21st Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference, San Francisco, USA, July 2010– Special session on Reducing Cost and Maximizing Equipment Productivity, co-chair James Morrison – Shi-Chung Chang (Technical Committee)

• 6th Annual IEEE CASE 2010– Special session on Green Tech Automation, chairs James Morrison and Jingshan Li– Semiconductor Manufacturing session chaired by James Morrison and Jingshan Li

• 5th MISTA– John Fowler (Conference Organizer)– Ken Fordyce (Plenary Speaker)– Focus session on Semiconductor Scheduling chaired by James Morrison

• 7th MASM (within Wintersim 2011)– Stephane Dauzere-Peres, John Fowler (Conference Organizers)– Lars Monch, James Morrison (Track Chairs)


Discussion Topics• How to join?

– Send me an e-mail: [email protected]

• Future special session ideas? – What academic conferences? IEEE CASE 2012, MASM 2011 & 2012– What industry conferences? None specifically preferred (ASMC, ISSM, IC-APC, etc.)

• Future special issues– In planning: Automation for Next Generation High Tech Manufacturing– Emerging technologies? 450 mm transition– Emerging needs? 450 mm transition

• Future directions or focus areas for the TC? Green tech… how to get in?• Volunteers to help develop special sessions/issues? Contact James Morrison• How can the TC better serve the community? Contact James Morrison

13


14

technical committee meeting

Documents