technical datasheets€¦ · contents uni 8™ technical datasheets issue date: 30/06/06 issue no:...
TRANSCRIPT
T H E U L T I M A T E I N F A L L P R O T E C T I O N
TECHNICAL DATASHEETS
Always read and follow the warnings and instructions for use© Copyright Capital Safety Systems Ltd 2013
Uni 8™
ContentsUni 8™ Technical Datasheets
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
Contents 2
Component Selection Guidelines 3
Component Properties 4
1327 - Typical Uni 8™ System 5
1328 - Typical Uni 8™ evolution™ System 6
0906 - Uni 8™ 8mm Hex Swage Toggle 7
0917 - Uni 8™ 8mm Hex Swage Joiner 8
909 - Uni 8™ Intermediate Bracket 9
924 - Uni 8™ Variable Bracket 10
1315 - Uni 8™ Straight Eye 11
1295 - Uni 8™ evolution™ Intermediate Bracket 12
1298 - Uni 8™ evolution™ Short Curve 13
1301 - Uni 8™ evolution™ Curve 14
1217 - 8mm 7x7 SS Cable /M 15
911 - Uni 8™ 45° SS Wire Corner 16
910 - Uni 8™ 90° SS Wire Corner 17
916 - Uni 8™ Rigid 90° Corner 18
926 - Uni 8™ Rigid 45° Corner 19
1218 - 8mm UniGrab & Carabiner 20
1308 - Uni 8™ evolution™ Traveller 21
1306 - Uni 8™ evolution™ Triple Articulated Anchorage Point 22
1307 - Uni 8™ evolution™ Mono Attachment Anchorage Point 23
0840 - Uni 8™ Wall Fixing Plate 24
866 - Uni 8™ Energy Absorber 25
1304 - Uni 8™ evolution™ Energy Absorber 26
1313 - Uni 8™ 8mm Hex Swage Tensioner 0.8kN 27
1320 - Uni 8™ Arm Pack 28
1329 - Uni 8™ System Tag 29
1323 - Tools List 30
Issue Date: 01/05/13 Issue No: 1 Page 2
Component Selection GuidelinesUni 8™ Technical Datasheets
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
RULES
1. ONLY 8mm, 7x7 Stainless Steel Cable (7240211) can be used with the Uni 8™ & Uni 8™ evolution™ System.
2. Systems designed with the Uni 8™ evolution™ Intermediate, Curve & Short Curve brackets (7240110, 7240130 & 7240120) can ONLY be used with Uni 8™ evolution™Traveller (7240100).
3. Uni 8™ evolution™ Traveller (7240100) IS compatible with all Uni-8™ Components.
4. Uni 8™ evolution™ Intermediate and Corner brackets (7240110, 7250120 & 7240130) can ONLY be used with Uni 8™ evolution™ Traveller (7240100).
5. It is Recommended that Uni 8™ Cable guides (7241065, 7241067, 7241068 & 7241069) & Uni 8™ evolution™ Brackets (7240110, 7250120 & 7240130) are not mixedwithin a single system for aesthetic reasons ONLY.
6. Uni 8™ evolution™ Mono & triple Attachment anchorage points (7240175, 7240175) can ONLY be used with the Uni 8™ evolution™ Energy Absorber (7240151).
Uni 8™ evolution™ Traveller Uni 8™ Unigrab
7240100 7234020
Uni 8™ Intermediate Bracket 7241065
Uni 8™ 45° SS Wire Corner (for use with 7241065)
7241069
Uni 8™ 90° SS Wire Corner (for use with 7241065)
7241068
Uni 8™ evolution™ Intermediate
7240110
Uni 8™ evolution™ Curve 7240130
Uni 8™ evolution™Short Curve
7240120
Uni 8™ evolution™Energy Absorber*
7240151
Uni 8™ Energy Absorber 7241073
Uni 8™ Tensioner 7240166
Uni 8™ evolution™ Triple Articulated anchorage point
7240175
Uni 8™ evolution™ Mono Attachment anchorage
7240176
Issue Date: 01/05/13 Issue No: 1 Page 3
Uni 8™ Component PropertiesUni 8™ Technical Datasheets
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
Capacity (kg)
No. Users
Activation Force (kN
)
Max deploym
ent length (m
m)
Breaking strength (kN
)
Torque load (N
/m)
Weight (kg)
Operating temp range (°C)
life (yrs.)Norm
alenvironm
entAngle (°)
Max Min Max Minvertical
(±)
UniGrab 7234020 136 1 16
Uni 8™ evolution™ Traveller
7240100 140 1 15
8mm Hex Swage Toggle 7234011 38
Uni 8™ Tensioner 7240166 37
Uni 8™ evolution™ Intermediate
7240110 25 60 0.2 60 -40 10 15
Uni 8™ evolution™ Curve
7240130 30 60 0.7 60 -40 10 45 90 15
Uni 8™ evolution™ Short Curve
7240120 30 60 0.4 60 -40 10 15 45 15
Uni 8™ evolution™ Energy Absorber
7240151 4 550 37 5.2 60 -40 10
Uni 8™ evolution™ Triple Articulatedanchorage point
7240175 37 60 1.6 60 -40 10
Uni 8™ evolution™ Mono Attachment
anchorage7240176 30 60 0.7 60 -40 10
Uni 8™ 8mm Hex Joiner 7234012 38 0.1 60 -40 10
Uni 8™ Wall Fixing plate 7234021 50 60 1.8 60 -40 10
Uni 8™ Straight eye 7240122 >45 60 0.4 60 -40 10
Uni 8™ Energy Absorber 7241073 4 275 38 1.1 60 -40 10
Uni 8™ Intermediate Bracket
7241065 16 50 0.4 60 -40 10 15 15 15
Uni 8™ Variable bracket 7241066 16 50 0.6 60 -40 10 Customisable 15
8mm, 7 x 7 Stainless steel Cable
7240211 38.7 0.2 per m 60 -40 10
Uni 8™ 45° SSWire Corner
7241069 * 0.1 60 -40 10 60 30 15
Uni 8™ 90° SSWire Corner
7241068 * 0.1 60 -40 10 105 75 15
* Only Tested as part of a system and was not the limiting component
Issue Date: 01/05/13 Issue No: 1 Page 4
Technical Datasheet: 1327Typical Uni 8™ System
TM
48
www.
capi
tals
afet
y.com
OSHA
191
5 15
9, 1
926
502
Subp
art M
and
EN
795:
1996
B
C
D
E
F
G
H
A
I
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
SYSTEM SPECIFICATION
A Uni 8™ Wall Fixing Plate (7234021)
B Uni 8™ Energy Absorber (7241073)
C 8mm Hex Swage Toggle (7234011)
D 8mm, 7 x 7 Stainless Steel Cable (7240211)
E Uni 8™ Intermediate Bracket (7241065)
F UniGrab & Carabiner (7234020)
GUni 8™ 8mm Hex Swage Tensioner 0.8kN (7240166)
H Uni 8™ Straight Eye (7240122)
I Uni 8™ 90 SS Wire Corner (7241068)
CONFORMITY EN 795 Class C, OSHA Compliant, AS/NZS 1891.2
A
B
C
D
E
F
I
GH
Issue Date: 01/05/13 Issue No: 1 Page 5
C
B
D E
A
F G
Technical Datasheet: 1328Typical Uni 8™ evolution™ System
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
D 8mm, 7 x 7 Stainless Steel Cable (7240211)
G Uni 8™ Hex Swage Tensioner 0.8kN (7210166)
J Uni 8™ evolution™ Triple Attachement Anchorage (7240175)
K Uni 8™ evolution™ Energy Absorber (7240151)
L Uni 8™ evolution™ Intermediate Bracket (7240110)
M Uni 8™ evolution™ Traveller (7240100)
N Uni 8™ evolution™ Curve (7240130)
SYSTEM SPECIFICATION
CONFORMITY EN 795 Class C, OSHA Compliant, AS/NZS 1891.2
JGDN
L
M
K
Issue Date: 01/05/13 Issue No: 1 Page 6
Technical Datasheet: 0906Uni 8™ 8mm Hex Swage TogglePart No: 7234011
APPLICATION
Used to hold the cable fi rmly in place at one end of the system. For use with 8mm 1x19 or 7x7 wire only. Refer to installation instructions for information on assembly and installation.19kN max permitted arrest load, min break strength 38kN.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
30mm (1.18”)
179m
m (7
.05”
)
82m
m (3
.23”
)
12.5mm (0.63”)
Before Swaging
28mm (1.10”)
18mm (0.71”)
Ø12.7mm (0.5”)
MATERIAL 316 Stainless Steel
FINISH Natural
WEIGHT 0.33kg (0.73 lbs)
QUALITY 100% Visual Inspection
Issue Date: 01/05/13 Issue No: 1 Page 7
Technical Datasheet: 0917Uni 8™ 8mm Hex Swage JoinerPart No: 7234012
APPLICATION
Used to join two sections of cable together. For use with 8mm 1x19 or 7x7 wire only. Refer to installation instructions for information on assembly and installation.19kN max permitted cable tension, min break strength 38kN.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
190m
m (7
.48”
) bef
ore
swag
ing
200m
m (7
.87”
) afte
r sw
agin
g
79m
m (3
.11”
)
A8mm 1x19 or 7x7 Stainless Steel Cable*
BUni 8™ 8mm Hex Swage Joiner
*Order Separately.
MATERIAL 316 Stainless Steel
FINISH Natural
WEIGHT 0.12kg (0.73 lbs)
QUALITY 100% Visual Inspection
A
B
A
Issue Date: 01/05/13 Issue No: 1 Page 8
Technical Datasheet: 909Uni 8™ Intermediate Bracket Part No: 7241065
APPLICATION
The Uni 8™ intermediate bracket is designed to allow system installation in a variety of positions. The bracket can be mounted on solid posts or structures with consideration given to isolation methods to prevent cross contamination where necessary.Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
107.
5mm
(4.
2”)
80mm (3.2”)
MATERIAL Nylon 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
FINISH Natural Natural Electropolished Electropolished
WEIGHT 0.44kg (0.98 lbs)
QUALITY 100% Visual Inspection
A B C D
B
A
D
C
Ø9mm
A M8 Nylon Shear Pin
B M8x70 A470 SS Fixing
C Bracket Arm
D Carrier
Issue Date: 01/05/13 Issue No: 1 Page 9
Technical Datasheet: 924Uni 8™ Variable BracketPart No: 7241066
APPLICATION
For use on pitched roof systems when the Uni 8™ system is required to cross a ridge or follow a hip type corner.Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
79.5
mm
(3.1
”)
107.
5mm
(4.2
”)
60mm (2.4”)
420mm (16.5”)
MATERIAL 316 Stainless Steel
FINISH Electropolished
WEIGHT 0.615kg (1.36 lbs)
QUALITY 100% Visual Inspection
Ø9mm
Issue Date: 01/05/13 Issue No: 1 Page 10
Technical Datasheet: 1315Uni 8™ Straight Eye Part No: 7240122
APPLICATION
The Uni 8™ Straight Eye is designed as a multipurpose end anchor for wall and overhead horizontal systems.Minimum breaking strength greater than 45kNSafe to load in direction A & B. DO NOT LOAD IN DIRECTION C
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
80m
m (3
.15”
)
R115mm (0.2”)
49mm (2”)
16.5mm (0.65”)
58.6mm (2.3”)
Direction C
Direction A
55mm (2.2”)
Direction B
MATERIAL 316 Stainless Steel
FINISH Electropolished
WEIGHT 0.35kg (12.35 oz)
QUALITY 100% Visual Inspection
Issue Date: 01/05/13 Issue No: 1 Page 11
Technical Datasheet: 1295Uni 8™ evolution™ Intermediate BracketPart No: 7240110
APPLICATION
The Uni 8™ evolution™ intermediate bracket can be mounted onto a variety of structures, with consideration given to isolation methodsto prevent cross contamination where necessary.Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
A B C
A Body
B Cable Guide
C Protection Cover
150mm (5.9”)
72m
m (2
.83”
)
32m
m (1
.26”
)
64mm (2.52”)
Ø9mm (0.35”)
READ COMPONENT SELECTION GUIDELINES
MATERIAL 316 Stainless Steel Anti-UV Polyamide Anti-UV Polyamide
FINISH Electropolished Natural Natural
WEIGHT 0.21kg (0.46 lbs)
QUALITY 100% Visual Inspection
A B
C
Issue Date: 01/05/13 Issue No: 1 Page 12
Technical Datasheet: 1298Uni 8™ evolution™ Short CurvePart No: 7240120
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
A B C D
A Body
B Cable Guide
C Curve Reinforcement
D Protection Cover
250mm (9.84”)
44m
m (1
.73”
)
76m
m (2
.99”
)
77mm (3.03”)64mm (2.52”)
Ø9mm (0.35”)
APPLICATION
The Uni 8™ evolution™ intermediate bracket can be mounted onto a variety of structures, with consideration given to isolation methodsto prevent cross contamination where necessary. Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. READ COMPONENT
SELECTION GUIDELINES
MATERIAL 304 Stainless Steel Anti-UV Polyamide 304 Stainless Steel Anti-UV Polyamide
FINISH Electropolished Natural Electropolished Natural
WEIGHT 0.4kg (0.9 lbs)
QUALITY 100% Visual Inspection
A
B
CD
Issue Date: 01/05/13 Issue No: 1 Page 13
Technical Datasheet: 1301Uni 8™ evolution™ CurvePart No: 7240130
APPLICATION
The Uni 8™ evolution™ curve is capable of forming curves ranging from 45 to 90 degrees so that the lifeline can be adjusted to the needs of each installation.Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
A B C D
A Body
B Curve Reinforcement
C Flexible Cable Guide
D Protection Cover
480mm (18.9”)
85m
m (3
.35”
)
READ COMPONENT SELECTION GUIDELINES
MATERIAL 304 Stainless Steel 304 Stainless Steel Anti-UV Polyamide Anti-UV Polyamide
FINISH Electropolished Electropolished Natural Natural
WEIGHT 0.7kg (1.54 lbs)
QUALITY 100% Visual Inspection
A
B
C
D
Issue Date: 01/05/13 Issue No: 1 Page 14
Technical Datasheet: 12178mm 7x7 SS Cable /M Part No: 7240211
APPLICATION
For use in RoofSafe™ Cable and Uni 8™ horizontal applications. Minimum Break Strength 38.7kN (8700.1lbf)Note: Can also be purchased on a 1000m drum (3 280.8ft) (Part Number: 7240219)
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
Ø8mm
MATERIAL 316 Stainless Steel
FINISH Natural
WEIGHT 0.27kg /M
QUALITY 100% Visual Inspection. 100% Molybdenum Tested
Issue Date: 01/05/13 Issue No: 1 Page 15
Technical Datasheet: 911Uni 8™ 45° SS Wire CornerPart No: 7241069
APPLICATION:
To be used in conjunction with Uni 8™ intermediate brackets (7241065) to form a 45° corner in the orientation required.Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
10mm (0.39”)
28.5mm (1.12”) Straight Length
O/D 12mm
45
I/D 9mm
0.5mm
R206mm R200mm
165mm (6.5”)
MATERIAL 316 Stainless Steel
FINISH Electropolished
WEIGHT 0.08kg (0.18 lbs)
QUALITY 100% Visual Inspection.
109m
m (4
.29”
)
Issue Date: 01/05/13 Issue No: 1 Page 16
Technical Datasheet: 910Uni 8™ 90° SS Wire CornerPart No: 7241068
APPLICATION
To be used in conjunction with Uni 8™ intermediate brackets (7241065) to form a 90° corner in the orientation required.Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
10mm (0.39”)
28.5mm (1.12”) Straight Length
O/D Ø12mm
90
I/D Ø9mm
0.5mm
R206mm R200mm
MATERIAL 316 Stainless Steel
FINISH Electropolished
WEIGHT 0.15kg (0.33 lbs)
QUALITY 100% Visual Inspection.
Issue Date: 01/05/13 Issue No: 1 Page 17
Technical Datasheet: 916Uni 8™ Rigid 90° CornerPart No: 7241063
APPLICATION
Used for fl oor mounting or with the use on rigid posts. CAN NOT be used in conjunction with RoofSafe™ posts. For shock absorption element use with inline absorbers.(Part Number - 7241073)Minimum grade A470 M16 fastening should be used to fi x bracket to structure or rigid posts at a recommended torque of 50 Nm.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
MATERIAL 316 Stainless Steel
FINISH Polished
WEIGHT 1.5kg (3.3 lbs)
QUALITY 100% Visual Inspection.
Ø16.5mm
300mm (11.8”)
60m
m(2
.36”
)
111.
5mm
(4.2
”)
Issue Date: 01/05/13 Issue No: 1 Page 18
Technical Datasheet: 926Uni 8™ Rigid 45° CornerPart No: 7241064
APPLICATION
Used for Floor mounting or with the use of rigid posts. CAN NOT be used in conjunction with RoofSafe™ posts. For shock absorption element use with Inline absorbers (7241073)Minimum grade A470 M16 fastening should be used to fi x bracket to structure or rigid posts at a recommended torque of 50 Nm.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
Ø16.5mm
300mm (11.8”)
60m
m(2
.36”
)
111.
5mm
(4.2
”)
MATERIAL 316 Stainless Steel
FINISH Electropolished
WEIGHT 1.5kg (3.25 lbs)
QUALITY 100% Visual Inspection
Issue Date: 01/05/13 Issue No: 1 Page 19
Technical Datasheet: 12188mm UniGrab & CarabinerPart No: 7234020
APPLICATION
For use as an attachment device for a single user in conjuction with the Uni 8™ and RoofSafe™ Cable systems. Note: Maximum user weight 136kg. Only to be used with carabiner provided.To prolong the life of the product, do not leave on the system when not in use.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
26mm (1.02”)
Ø15.5mm (0.61”)
4.5
- 6.1
mm
(0.1
8” -
0.24
””)
60mm (2.36”)
63m
m (2
.48”
)
A UniGrab
B Carabiner
BA
MATERIAL 316 Stainless Steel Silver
FINISH Electropolished Silver Zinc Passivate
WEIGHT 0.42kg (0.93 lbs))
QUALITY 100% Visual, alignment and interface checks
A
B
Issue Date: 01/05/13 Issue No: 1 Page 20
Technical Datasheet: 1308Uni 8™ evolution™ TravellerPart No: 7240100
APPLICATION
The Uni 8™ evolution™ Traveller is the interconnecting element between the user and the lifeline. Automatic pass through over intermediate brackets and curves means that the user can stay connected to the lifeline permanently.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
A B C D
27mm (1.12”)
A Anchorage Ring
B Body
C Friction Reducing Rollers
D Plastic Parts
READ COMPONENT SELECTION GUIDELINES
MATERIAL Aluminium T6 316L Stainless Steel Polyamide Anti-UV Polyamide
FINISH Natural
WEIGHT 0.63kg (1.4 lbs)
QUALITY 100% Visual Inspection
D
A
B
C
Issue Date: 01/05/13 Issue No: 1 Page 21
Technical Datasheet: 1306Uni 8™ evolution™ Triple Articulated Anchorage Point Part No: 7240175
APPLICATION
The Uni 8™ evolution™ articulated anchorage point is used to set up lifeline anchorage points. The multi-directional articulation of the anchorage point meansthat it can be incorporated into every confi guration (wall, fl oor or overhead) dealing with solicitation (shearing or tearing). Breaking strength: 37kN (8200lbs).Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. Safe to load in direction A & B. DO NOT LOAD IN DIRECTION C
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
126mm (5”)
Ø13.5mm (0.53”)
Direction B Direction C Direction CDirection B
Direction A
110m
m (4
.33”
)
84m
m (3
.3”)
150mm (5.9”)
M12 Bolt
62m
m (2
.52”
)
A Body
B Plate
READ COMPONENT SELECTION GUIDELINES
MATERIAL 316 Stainless Steel
FINISH Electropolished
WEIGHT 1.6kg (3.5 lbs)
QUALITY 100% Visual Inspection
A
B
Issue Date: 01/05/13 Issue No: 1 Page 22
Technical Datasheet: 1307Uni 8™ evolution™ Mono Attachment Anchorage PointPart No: 7240176
APPLICATION
The Uni 8™ evolution™ mono-attachment anchorage is the simplest solution for installing lifeline anchorage points. Can only be used where the structure is strong enough to take the single load point such as structural steel work and concrete over 100mmMinimum grade A470 M16 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.Safe to load in direction A & B. DO NOT LOAD IN DIRECTION C
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
62mm (2.44”)
Ø12.
1mm
(0.4
8”)
27mm (1.12”)
A Body
B M12 Fastener
READ COMPONENT SELECTION GUIDELINES
MATERIAL 316 Stainless Steel
FINISH Electropolished
WEIGHT 0.7kg (1.6 lbs)
QUALITY 100% Visual Inspection
Direction CDirection BDirection B Direction C
Direction A
A
B
Issue Date: 01/05/13 Issue No: 1 Page 23
Technical Datasheet: 0840Uni 8™ Wall Fixing Plate Part No: 7234021
APPLICATION
For use in conjuction with the Uni 8™ straight eye or other anchor points to spread the load back to the structure. Recommended Bolts - M12 A470 (minimum grade) Minimum breaking strength 41.65kN (9363.29lbf)Static strength of wall plate in: Direction A- 53kN - Direction B- 54kN
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
75m
m (2
.95”
)
42m
m (1
.65”
)
12m
m (0
.47”
)
Ø13mm (0.51”) M16 Thread
Direction A
Direction B
250mm (9.84”)
MATERIAL 316 Stainless Steel
FINISH Electropolished
WEIGHT 1.79kg (3.95 lbs)
QUALITY 100% Visual Inspection
Issue Date: 01/05/13 Issue No: 1 Page 24
APPLICATION
For use in Uni 8™ & Uni 8™ overhead systems to reduce loading generated in a fall arrest situation. Reduces maximum fall arrest load by up to 4.5 kN (minimum system load will not fall bellow 7.5kN).N.B. When calculating the minimum ground clearance for systems using 7241073 Inline energy absorbers, be sure to consult Uni 8™ calculation software.In systems with corners two inline energy absorbers maybe required.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
4mm
(0.1
6”)
Ø13mm
245mm (9.64”)
Ø12mm
65m
m (2
.56”
)Technical Datasheet: 866Uni 8™ Energy AbsorberPart No: 7241073
MATERIAL 316 Stainless Steel
FINISH Electropolished
WEIGHT 1.11kg (2.45 lbs)
QUALITY 100% Visual Inspection
TM
4 8
www.capitalsafety.com
OSHA 1915 159, 1926 502 Subpart M and EN 795:1996
Issue Date: 01/05/13 Issue No: 1 Page 25
Technical Datasheet: 1304Uni 8™ evolution™ Energy Absorber Part No: 7241051
APPLICATION
The Uni 8™ evolution™ energy absorber is installed at the end of the lifeline, of which limits the forces at the anchor points to protect the accomodating structure.Breaking strength: 37 kN (8200 lbs). Absorption threshold 10kN (880 lbf). Absorption travel: MAX 800mm (2ft 7.5inches). When calculating the minimum ground clearance for systemsusing 7240151 Uni 8™ evolution™ energy absorbers, be sure to consult evolution™ calculation software. In systems with corners two inline energy absorbers maybe required.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
558mm (23.15”)
R70
142m
m (5
.59”
)80
mm
(3.1
4”)
MATERIAL Housing: Anti-UV polyamide. Internals: 304 Stainless Steel. Absorbing Elements: Bronze, 304 Stainless Steel
FINISH Natural / Electropolished
WEIGHT 5.2kg (11.5 lbs)
QUALITY 100% Visual Inspection
READ COMPONENT SELECTION GUIDELINES
Issue Date: 01/05/13 Issue No: 1 Page 26
Technical Datasheet: 1313Uni 8™ 8mm Hex Swage Tensioner 0.8kNPart No: 7240166
APPLICATION
The Uni 8™ tensioner unit is attached to the anchor point using the clevis pin and split pin. It is used to set the tension of the cable in horizontal applications.Refer to installation instructions for information on assembly and installation.For use with 8mm 1x19 or 7x7 wire only. 19kN max permitted cable tension, min break strength 38kN.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
A Clevis Pin
B Cotter Pin
C Tension Indicator Disc
D Lock Nut
E Turn Buckle
F Lock Nut
G Stud
400m
m (1
5.75
”)
MATERIAL 316 Stainless Steel
FINISH Natural / Electropolished
WEIGHT 0.85kg (1.87 lbs)
QUALITY 100% Visual Inspection
A
B
C
E
F
D
G
Issue Date: 01/05/13 Issue No: 1 Page 27
Technical Datasheet: 1320Uni 8™ Arm PackPart No: 7241075
APPLICATION
Works in conjunction with an intermediate bracket (7241065) as a guide for the system cable to feed through strengthening the cable over a larger span.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
MATERIAL 316 Stainless Steel Nylon
FINISH Electropolished Natural
WEIGHT 0.14kg
QUALITY 100% Visual Inspection
BA
B
A
Issue Date: 01/05/13 Issue No: 1 Page 28
APPLICATION
For use on all Uni 8™ and Uni 8™ Overhead systems. (Languages: English, Spanish, Dutch, German, Portugese, Italian and Swedish).Must be attached in a visible location near the start of the system. It is completed by the installer with essential information fro the user.
COMPONENT SPECIFICATION
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
214.6mm (8.45”)
90m
m (3
.54”
)Technical Datasheet: 1329Uni 8™ System TagPart No: 7241257
MATERIAL Aluminium 5005
FINISH Anodised. Screen printed at low temperature baked.
WEIGHT 9g (0.32oz)
QUALITY 100% Visual Inspection
EN795:1996 Class COSHA COMPLIANTAS/NZS 1891.2
Installation Date / Installatiedatum / Fecha de instalación / Montagedatum /Date d’installation / Data da instalação / Data installazione / Installationsdatum
Installed By / Geïnstalleerd door / Instalado Por / Montiert durch / Installateur / Instalado por / Installato da / Installerad av
Contact Number / Contactnr. / Tel. de contacto / Kontakttelefon / Téléphone / Nº de Contacto / Numero contatto / Kontaktnummer
Min. Ground Clearance (m) / Min. vrije valruimte (m) / Distancia minima hasta el suelo (m) / Mindestabstand zum Boden (m) / Hauteur libre minimale (m) / Altura mínima livre (mt) / Distanza libera minima da terra (m) / Min. höjd ovanför marken
Max. Users Per System / Max. aantal gebruikers per systeem / Máximo de usuarios por sistema / Maximale Benutzer pro System / Nombre maximal d’utilisateurs par système / Nº máximo de utilizadores por linha / N. utenti max. per sistema / Max. användare per system
Max. Users Per Span / Max. aantal gebruikers per overspanning / Máximo de usuarios por vano / Höchstzahl der Benutzer pro Spannweite / Nombre maximal d’utilisateurs par portée / Nº máximo de utilizadores por vão / N. utenti max. per sezione / Max. användare per skena
Next Service Date / Datum volgende keuring / Próxima fecha de revisión / Termin der nächsten Wartung / Prochaine date d’entretien / Data da próxima Inspecção / Data prossima manutenzione / Nästa servicedatum
System Serial No. / Serienummer / Número de serie del sistema / Seriennummer des Systems / Numéro de série / Nº de série do sistema / N. di serie sistema / Systemets serienr.
Use Energy Absorbing Lanyards / Gebruik energie-absorberende verbindingslijnen / Utilice acolladores de absorción de energía / Verwenden Sie falldämpfende Sicherheits-/Anschlagseile / Utilisez des longes à absorption d’énergie / Usar cordas com amortecedor de energia / Utilizzare funi ad assorbimento d’energia / Använd energiupptagande taljerep
www.capitalsafety.com
5A Merse RoadNorth Moons MoatRedditchWorcestershireB98 9HL
2013 INTERTEK ITS10ATEX17038
Technical File No. 70802
Capital Safety Group
II 2 G c IIC T3
TM
Issue Date: 01/05/13 Issue No: 1 Page 29
Technical Datasheet: 1323Tools List
Issue Date: 30/06/06 Issue No: 1 Page 1 of 2
Hex Swager c/w Die Set 7241119
Hex Swage without Die Set 7241120
Wire Cutters 7241121
Hex Swage Die Set 10mm 7241122
Wire Cable Grip 7241123
8mm Cable Tester Kit 7241124
Eyebolt Tester Kit 7241125
8mm Cable/eyebolt Tester 7241126
Issue Date: 01/05/13 Issue No: 1 Page 30
All rights reserved. The material contained herein is copyrighted; no part of this publication may be
reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise without prior written permission from Capital Safety.
EUROPE, MIDDLE EAST & AFRICA
FranceLe Broc CenterZ.I. 1re Avenue – BP1506511 Carros Le Broc CedexFRANCE
t: +33 (0)4 97 10 00 10f: +33 (0)4 93 08 79 70
United Kingdom5a Merse RoadNorth Moons MoatRedditch, WorcestershireB98 9HL UK
t: +44 (0) 1527 548 000f: +44 (0) 1527 591 000
DubaiME Branch Offi cePO Box 17789JAFZA, Dubai – U.A.E
t: 00 800 999 55500f: +33 (0)4 93 08 79 70
GermanyHagener Strasse 44, D-57489, Drolshagen, Germany
t: +49 (0) 2 76 18 33 82 29f: +33 (0)4 93 08 79 70
CUSTOMER SERVICES
00 800 999 55500
GLOBAL LEADER IN FALL PROTECTIONCapital Safety is one of the world’s leading manufacturers of fall protection and rescue equipment, with decades of experience and a legacy of innovation.
We understand the industries we serve and listen to the workers in the fi eld. We employ the best engi-neers to create innovative solutions and patent the products that keep workers safe at heights around the world. Capital Safety has the best quality and largest range of fall protection products in the industry. But we’re more than a product company.
We take an innovative approach in bringing our products to the fi eld. We have created international partnerships and a vast network of authorized distributors, certifi ed installers and service centres. We offer on-site and in-house training.
Look for complete solutions in our extensive line of DBI-SALA® and Protecta® products.