technical data sheet rl78 series - rfs 240 0.50 0.151 33 44 300 0.55 0.169 29 39 400 0.64 0.195 25...
TRANSCRIPT
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ RL78 series Date: 25.11.2010
All
info
rmation c
onta
ined in t
he p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Product Description
Size 7/8"
Feeder Type Air Dielectric, solid inner and outer
PTFE spacers
Conductor Material High conductivity copper tube
Outer Conductor OD, mm (in) 22.20 (0.875)
Outer Conductor ID, mm (in) 19.94 (0.785)
Inner Conductor OD, mm (in) 8.68 (0.342)
Inner Conductor ID, mm (in) 7.39 (0.291)
Mechanical Specifications
Weight, kg/m (lb/ft) 0.9 (0.60)
EIA Flange weight kg (lb) 0.2 (0.4)
Standard lengths m (ft) 3.0 (9.8)
Max. indoor clamp spacing m (ft) 1.2 (4)
Max. exterior clamp spacing m (ft) 1.0 (3)
Electrical Specifications
Impedance, Ohm 50 +/-0.5
Velocity, percent 99.8
Peak Power Rating, kW 78
RF Peak Voltage, Volts 2500
Ordering Information
3.0m length Unflanged RL 35.83000
3.0m length EIA Flanged RL 35.73000
Technical Data Sheet RL78 Series
RFS rigid line components are available for both unpressurized (indoor) and
pressurized, flanged (outdoor) systems.
Sizes available are 7/8", 1 5/8", 3 1/8", 4 1/2", 4 7/8", 6 1/8" and 7 3/16”.
All components are manufactured to the most exacting tolerances.
Other line sizes are available on special order.
• Line inner and outer tubing is of high conductivity, hard-drawn, copper, milled to
exact dimensions. Unflanged components for indoor use are polished and
sprayed with a clear lacquer to maintain a high lustre finish
• Flanges and mitred elbow joints are TIG welded for maximum strength
• Captive PTFE dielectric insulators are used exclusively in lines and elbows to
ensure precision mating and stability of components after assembly
• All inner conductor connectors are silver plated
• All components conform to the relevant EIA or IEC standards
Rigid Line Components 7/8” 50 ohm
Specifications
Features
Accessories
Frequency Attenuation Attenuation Average Average
MHz dB/100 m dB/100 ft Power kW 1 Power kW 2
50 0.87 0.27 7.6 10.2
88 1.15 0.35 5.8 7.7
98 1.22 0.37 5.5 7.3
108 1.28 0.39 5.2 6.9
150 1.51 0.46 4.4 5.9
174 1.62 0.49 4.1 5.5
202 1.75 0.53 3.8 5.1
240 1.91 0.58 3.5 4.6
300 2.13 0.65 3.1 4.2
400 2.46 0.75 2.7 3.6
470 2.67 0.81 2.5 3.3
500 2.75 0.84 2.4 3.2
520 2.80 0.86 2.4 3.2
600 3.01 0.92 2.2 2.9
665 3.17 0.97 2.1 2.8
719 3.30 1.01 2.0 2.7
800 3.48 1.06 1.9 2.5
820 3.52 1.07 1.9 2.5
862 3.61 1.10 1.8 2.5
Attenuation at 20°C (68°F) cable temperature
Mean power rating at 40°C (104°F) ambient temperature1. Outer temp rise 23°C (73°F), Inner temp rise 80°C (176°F) 2. Outer temp rise 30°C (86°F), Inner temp rise 100°C (212°F)
Applying a dark matt finish will reduce max temp rises.
Attenuation and Average Power
Unflanged Elbow
M-M* 35.00011.004
M-F 35.00011.006
F-F 35.00011.002
* Standard supplyNote: Male unflanged
elbows include coupling
sleeves
EIA Flanged elbow
Part No: 35.00000
Straight coupling
Part No: 35.10163
Inner joining kit
Part No: 35.10028
Flange adaptor -
Hose clamp
attachment
Part No: 35.10165
Flange adaptor - Hard
solder
Part No: 35.20000
Suspension hanger
Part No: 19.00066.100
46mm62.4mm
Adaptors
RFS offers a full range of
adaptors to interface to
different line sizes and
connector types, please
refer to separate data sheet
available on request.
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ RL158 series Date: 25.11.2010
All
info
rmation c
onta
ined in t
he p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Product Description
Size 1 5/8"
Feeder Type Air Dielectric, solid inner and outer PTFE spacers
Structure
Conductor Material High conductivity copper tube
Outer Conductor OD, mm (in) 41.28 (1.625)
Outer Conductor ID, mm (in) 38.79 (1.527)
Inner Conductor OD, mm (in) 16.87 (0.664)
Inner Conductor ID, mm (in) 14.94 (0.588)
Mechanical Specifications
Weight, kg/m (lb/ft) 1.75 (1.18)
EIA Flange weight kg (lb) 0.3 (0.7)
Standard lengths m (ft) 5.5 (18.0)
Recommended maximum
indoor clamp spacing m (ft) 1.2 (4)
Recommended maximum
exterior clamp spacing m (ft) 1.0 (3)
Electrical Specifications
Impedance, Ohm 50 +/-0.5
Velocity, percent 99.8
Peak Power Rating, kW 270
RF Peak Voltage, Volts 4700
Ordering Information
5.5m length Unflanged RL 36.85500
5.5m length EIA Flanged RL 36.75500
Technical Data Sheet RL158 Series
RFS rigid line components are available for both unpressurized (indoor) and
pressurized, flanged (outdoor) systems.
Sizes available are 7/8", 1 5/8", 3 1/8", 4 1/2", 4 7/8", 6 1/8" and 7 3/16”.
All components are manufactured to the most exacting tolerances.
Other line sizes are available on special order.
• Line inner and outer tubing is of high conductivity, hard-drawn, copper, milled to
exact dimensions. Unflanged components for indoor use are polished and
sprayed with a clear lacquer to maintain a high lustre finish
• Flanges and mitred elbow joints are TIG welded for maximum strength
• Captive PTFE dielectric insulators are used exclusively in lines and elbows to
ensure precision mating and stability of components after assembly
• All inner conductor connectors are silver plated
• All components conform to the relevant EIA or IEC standards
Rigid Line Components 1 5/8” 50 ohm
Specifications
Features
Accessories
Frequency Attenuation Attenuation Average Average
MHz dB/100 m dB/100 ft Power kW 1 Power kW 2
50 0.45 0.136 22.1 29.6
88 0.59 0.180 16.6 22.3
98 0.62 0.190 15.8 21.1
108 0.65 0.200 15.0 20.1
150 0.77 0.235 12.7 17.1
174 0.83 0.253 11.8 15.8
202 0.90 0.273 11.0 14.7
240 0.98 0.298 10.1 13.5
300 1.09 0.333 9.0 12.1
400 1.26 0.384 7.8 10.5
470 1.37 0.416 7.2 9.6
500 1.41 0.429 7.0 9.3
520 1.44 0.438 6.8 9.2
600 1.54 0.470 6.4 8.5
665 1.62 0.495 6.0 8.1
719 1.69 0.515 5.8 7.8
800 1.78 0.543 5.5 7.4
820 1.80 0.550 5.4 7.3
862 1.85 0.564 5.3 7.1
Attenuation at 20°C (68°F) cable temperature
Mean power rating at 40°C (104°F) ambient temperature1. Outer temp rise 23°C (73°F), Inner temp rise 80°C (176°F) 2. Outer temp rise 30°C (86°F), Inner temp rise 100°C (212°F)
Applying a dark matt finish will reduce max temp rises.
Attenuation and Average Power
Unflanged Elbow
M-M* 36.00011
M-F 36.00014
F-F 36.00144
* Standard supplyNote: Male unflanged
elbows include coupling
sleeves
EIA Flanged elbow
Part No: 36.00000
Straight coupling
Part No: 36.10009
Inner joining kit
Part No: 36.10002
Flange adaptor -
Hard solder
Part No: 36.20004
Flange adaptor - Hose
clamp attachment
Part No: 36.10007
Suspension hanger
Part No: 19.00063.100
Adaptors
RFS offers a full range of
adaptors to interface to
different line sizes and
connector types, please
refer to separate data sheet
available on request.
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ RL318 series Date: 25.11.2010
All
info
rmation c
onta
ined in t
he p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Product Description
Size 3 1/8"
Feeder Type Air Dielectric, solid inner and outer
PTFE spacers
Structure
Conductor Material High conductivity copper tube
Outer Conductor OD, mm (in) 79.4 (3.125)
Outer Conductor ID, mm (in) 76.8 (3.023)
Inner Conductor OD, mm (in) 33.4 (1.315)
Inner Conductor ID, mm (in) 31.3 (1.232)
Mechanical Specifications
Weight, kg/m (lb/ft) 3.6 (2.41)
EIA Flange weight kg (lb) 1 (2.2)
Standard lengths m (ft) 5.5 (18.0)
Max indoor clamp spacing m (ft) 1.5 (5)
Max. exterior clamp spacing m (ft) 1.2 (4)
Electrical Specifications
Impedance, Ohm 50 +/-0.5
Velocity, percent 99.8
Peak Power Rating, kW 920
RF Peak Voltage, Volts 9600
Ordering Information
5.5m length Unflanged RL 37.85500
5.5m length EIA Flanged RL 37.75500
Technical Data Sheet RL318 Series
RFS rigid line components are available for both unpressurized (indoor) and
pressurized, flanged (outdoor) systems.
Sizes available are 7/8", 1 5/8", 3 1/8", 4 1/2", 4 7/8", 6 1/8" and 7 3/16”.
All components are manufactured to the most exacting tolerances.
Other line sizes are available on special order.
• Line inner and outer tubing is of high conductivity, hard-drawn, copper, milled to
exact dimensions. Unflanged components for indoor use are polished and
sprayed with a clear lacquer to maintain a high lustre finish
• Flanges and mitred elbow joints are TIG welded for maximum strength
• Captive PTFE dielectric insulators are used exclusively in lines and elbows to
ensure precision mating and stability of components after assembly
• All inner conductor connectors are silver plated
• All components conform to the relevant EIA or IEC standards
Rigid Line Components 3 1/8” 50 ohm
Specifications
Features
Accessories
Frequency Attenuation Attenuation Average Average
MHz dB/100 m dB/100 ft Power kW 1 Power kW 2
50 0.23 0.069 71 96
88 0.30 0.092 54 72
98 0.32 0.097 51 68
108 0.33 0.101 49 65
150 0.39 0.119 41 55
174 0.42 0.129 38 51
202 0.45 0.139 36 48
240 0.50 0.151 33 44
300 0.55 0.169 29 39
400 0.64 0.195 25 34
470 0.69 0.212 23 31
500 0.72 0.218 23 30
520 0.73 0.222 22 30
600 0.78 0.239 21 28
665 0.83 0.252 20 26
719 0.86 0.262 19 25
800 0.91 0.276 18 24
820 0.92 0.279 18 24
862 0.94 0.286 17 23
Attenuation at 20°C (68°F) cable temperature
Mean power rating at 40°C (104°F) ambient temperature1. Outer temp rise 23°C (73°F), Inner temp rise 80°C (176°F) 2. Outer temp rise 30°C (86°F), Inner temp rise 100°C (212°F)
Applying a dark matt finish will reduce max temp rises.
Attenuation and Average Power
Unflanged Elbow
M-M* 37.00001
M-F 37.00002
F-F 37.00028
* Standard supplyNote: Male unflanged
elbows include coupling
sleeves
EIA Flanged elbow
Part No: 37.00004
Straight coupling
Part No: 37.10017
Inner joining kit
Part No: 37.10059
Flange adaptor -
Hard solder
Part No: 37.20008
Flange adaptor - Hose
clamp attachment
Part No: 37.10006
Suspension hanger
Part No: 19.00064.100
Adaptors
RFS offers a full range of
adaptors to interface to
different line sizes and
connector types, please
refer to separate data sheet
available on request.
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ RL412 series Date: 25.11.2010
All
info
rmation c
onta
ined in t
he p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Product Description
Size 4 1/2"
Feeder Type Air Dielectric, solid inner and outer
PTFE spacers
Structure
Conductor Material High conductivity copper tube
Outer Conductor OD, mm (in) 106 (4.173)
Outer Conductor ID, mm (in) 103 (4.055)
Inner Conductor OD, mm (in) 44.8 (1.764)
Inner Conductor ID, mm (in) 42.8 (1.685)
Mechanical Specifications
Weight, kg/m (lb/ft) 5.5 (3.69)
IEC Flange weight kg (lb) 1.5 (3.3)
Standard lengths m (ft) 5.5 (18.0)
Max. indoor clamp spacing m (ft) 2 (6.5)
Max. exterior clamp spacing m (ft) 1.2 (4)
Electrical Specifications
Impedance, Ohm 50 +/-0.5
Velocity, percent 99.8
Peak Power Rating, kW 1586
RF Peak Voltage, Volts 12600
Ordering Information
5.5m length Unflanged RL 38.85500
5.5m length EIA Flanged RL 38.75500
Technical Data Sheet RL412 Series
RFS rigid line components are available for both unpressurized (indoor) and
pressurized, flanged (outdoor) systems.
Sizes available are 7/8", 1 5/8", 3 1/8", 4 1/2", 4 7/8", 6 1/8" and 7 3/16”.
All components are manufactured to the most exacting tolerances.
Other line sizes are available on special order.
• Line inner and outer tubing is of high conductivity, hard-drawn, copper, milled to
exact dimensions. Unflanged components for indoor use are polished and
sprayed with a clear lacquer to maintain a high lustre finish
• Flanges and mitred elbow joints are TIG welded for maximum strength
• Captive PTFE dielectric insulators are used exclusively in lines and elbows to
ensure precision mating and stability of components after assembly
• All inner conductor connectors are silver plated
• All components conform to the relevant EIA or IEC standards
Rigid Line Components 4 1/2” 50 ohm
Specifications
Features
Accessories
Frequency Attenuation Attenuation Average Average
MHz dB/100 m dB/100 ft Power kW 1 Power kW 2
50 0.17 0.052 119 159
88 0.22 0.068 90 120
98 0.24 0.072 85 114
108 0.25 0.076 81 108
150 0.29 0.089 69 92
174 0.32 0.096 64 85
202 0.34 0.104 59 79
240 0.37 0.113 54 73
300 0.41 0.126 48 65
400 0.48 0.146 42 56
470 0.52 0.158 39 52
500 0.53 0.163 38 50
520 0.55 0.166 37 49
600 0.59 0.178 34 46
665 0.62 0.188 33 44
719 0.64 0.195 31 42
800 0.68 0.206 30 40
820 0.68 0.209 29 39
862 0.70 0.214 29 38
Attenuation at 20°C (68°F) cable temperature
Mean power rating at 40°C (104°F) ambient temperature1. Outer temp rise 23°C (73°F), Inner temp rise 80°C (176°F) 2. Outer temp rise 30°C (86°F), Inner temp rise 100°C (212°F)
Applying a dark matt finish will reduce max temp rises.
Attenuation and Average Power
Unflanged Elbow
M-M* 38.00003
M-F 38.00004
F-F 38.00023
* Standard supplyNote: Male unflanged
elbows include coupling
sleeves
EIA Flanged elbow
Part No: 38.00002
Straight coupling
Part No: 38.10011
Inner joining kit
Part No: 38.00000
Flange adaptor -
Hard solder
Part No: 38.20004
Flange adaptor - Hose
clamp attachment
Part No: 38.00001
Suspension hanger
Part No: 19.00065.100
Adaptors
RFS offers a full range of
adaptors to interface to
different line sizes and
connector types, please
refer to separate data sheet
available on request.
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ RL478 series Date: 25.11.2010
All
info
rmation c
onta
ined in t
he p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Product Description
Size 4 7/8"
Feeder Type Air Dielectric, solid inner and outer
PTFE spacers
Structure
Conductor Material High conductivity copper tube
Outer Conductor OD, mm (in) 123.2 (4.850)
Outer Conductor ID, mm (in) 120 (4.724)
Inner Conductor OD, mm (in) 52.1 (2.051)
Inner Conductor ID, mm (in) 50.1 (1.972)
Mechanical Specifications
Weight, kg/m (lb/ft) 7.1 (4.76)
EIA Flange weight kg (lb) 1.5 (3.3)
Standard lengths m (ft) 5.5 (18.0)
Max. indoor clamp spacing m (ft) 2 (6.5)
Max. exterior clamp spacing m (ft) 1.2 (4)
Electrical Specifications
Impedance, Ohm 50 +/-0.5
Velocity, percent 99.8
Peak Power Rating, kW 2160
RF Peak Voltage, Volts 14700
Ordering Information
5.5m length Unflanged RL 51.85500
5.5m length EIA Flanged RL 51.75500
Technical Data Sheet RL478 Series
RFS rigid line components are available for both unpressurized (indoor) and
pressurized, flanged (outdoor) systems.
Sizes available are 7/8", 1 5/8", 3 1/8", 4 1/2", 4 7/8", 6 1/8" and 7 3/16”.
All components are manufactured to the most exacting tolerances.
Other line sizes are available on special order.
• Line inner and outer tubing is of high conductivity, hard-drawn, copper, milled to
exact dimensions. Unflanged components for indoor use are polished and
sprayed with a clear lacquer to maintain a high lustre finish
• Flanges and mitred elbow joints are TIG welded for maximum strength
• Captive PTFE dielectric insulators are used exclusively in lines and elbows to
ensure precision mating and stability of components after assembly
• All inner conductor connectors are silver plated
• All components conform to the relevant EIA or IEC standards
Rigid Line Components 4 7/8” 50 ohm
Specifications
Features
Accessories
Frequency Attenuation Attenuation Average Average
MHz dB/100 m dB/100 ft Power kW 1 Power kW 2
50 0.14 0.044 153 205
88 0.19 0.059 115 154
98 0.20 0.062 109 146
108 0.21 0.065 104 139
150 0.25 0.077 88 118
174 0.27 0.082 82 110
202 0.29 0.089 76 102
240 0.32 0.097 70 93
300 0.36 0.108 62 84
400 0.41 0.125 54 72
470 0.44 0.135 50 67
500 0.46 0.140 48 65
520 0.47 0.143 47 63
600 0.50 0.153 44 59
665 0.53 0.161 42 56
719 0.55 0.168 40 54
800 0.58 0.177 38 51
820 0.59 0.179 38 51
862 0.60 0.183 37 49
Attenuation at 20°C (68°F) cable temperature
Mean power rating at 40°C (104°F) ambient temperature1. Outer temp rise 23°C (73°F), Inner temp rise 80°C (176°F) 2. Outer temp rise 30°C (86°F), Inner temp rise 100°C (212°F)
Applying a dark matt finish will reduce max temp rises.
Attenuation and Average Power
Unflanged Elbow
M-M* 51.00000
M-F 51.00001
F-F 51.00005
* Standard supplyNote: Male unflanged
elbows include coupling
sleeves
EIA Flanged elbow
Part No: 51.00010
Straight coupling
Part No: 51.10022
Inner joining kit
Part No: 51.00012
Flange adaptor -
Hard solder
Part No: 51.20018
Flange adaptor - Hose
clamp attachment
Part No: 51.00012
Suspension hanger
Part No: 19.00020.100
Adaptors
RFS offers a full range of
adaptors to interface to
different line sizes and
connector types, please
refer to separate data sheet
available on request.
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ RL618 series Date: 25.11.2010
All
info
rmation c
onta
ined in t
he p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Product Description
Size 6 1/8"
Feeder Type Air Dielectric, solid inner and outer
PTFE spacers
Structure
Conductor Material High conductivity copper tube
Outer Conductor OD, mm (in) 155.6 (6.125)
Outer Conductor ID, mm (in) 151.9 (5.980)
Inner Conductor OD, mm (in) 66 (2.598)
Inner Conductor ID, mm (in) 64 (2.520)
Mechanical Specifications
Weight, kg/m (lb/ft) 10 (6.71)
EIA Flange weight kg (lb) 1.7 (3.7)
Standard lengths m (ft) 5.5 (18.0)
Recommended maximum
Max. indoor clamp spacing m (ft) 2 (6.5)
Max. exterior clamp spacing m (ft) 1.3 (4)
Electrical Specifications
Impedance, Ohm 50 +/-0.5
Velocity, percent 99.8
Peak Power Rating, kW 3240
RF Peak Voltage, Volts 18000
Ordering Information
5.5m length Unflanged RL 39.85500
5.5m length EIA Flanged RL 39.75500
Technical Data Sheet RL618 Series
RFS rigid line components are available for both unpressurized (indoor) and
pressurized, flanged (outdoor) systems.
Sizes available are 7/8", 1 5/8", 3 1/8", 4 1/2", 4 7/8", 6 1/8" and 7 3/16”.
All components are manufactured to the most exacting tolerances.
Other line sizes are available on special order.
• Line inner and outer tubing is of high conductivity, hard-drawn, copper, milled to
exact dimensions. Unflanged components for indoor use are polished and
sprayed with a clear lacquer to maintain a high lustre finish
• Flanges and mitred elbow joints are TIG welded for maximum strength
• Captive PTFE dielectric insulators are used exclusively in lines and elbows to
ensure precision mating and stability of components after assembly
• All inner conductor connectors are silver plated
• All components conform to the relevant EIA or IEC standards
Rigid Line Components 6 1/8” 50 ohm
Specifications
Features
Accessories
Frequency Attenuation Attenuation Average Average
MHz dB/100 m dB/100 ft Power kW 1 Power kW 2
50 0.11 0.035 235 315
88 0.15 0.046 177 238
98 0.16 0.049 168 225
108 0.17 0.051 160 215
150 0.20 0.060 136 182
174 0.21 0.065 126 169
202 0.23 0.070 117 157
240 0.25 0.077 107 144
300 0.28 0.086 96 129
400 0.32 0.099 83 112
470 0.35 0.107 77 103
500 0.36 0.110 74 100
520 0.37 0.113 73 98
600 0.40 0.121 68 91
665 0.42 0.127 65 86
719 0.43 0.132 62 83
800 0.46 0.140 59 79
820 0.46 0.141 58 78
862 0.48 0.145 57 76
Attenuation at 20°C (68°F) cable temperature
Mean power rating at 40°C (104°F) ambient temperature1. Outer temp rise 23°C (73°F), Inner temp rise 80°C (176°F) 2. Outer temp rise 30°C (86°F), Inner temp rise 100°C (212°F)
Applying a dark matt finish will reduce max temp rises.
Attenuation and Average Power
Unflanged Elbow
M-M* 39.00005
M-F 39.00006
F-F 39.00024
* Standard supplyNote: Male unflanged
elbows include coupling
sleeves
EIA Flanged elbow
Part No: 39.00008
Wideband EIA Flanged
elbow
Part No: 39.00029
Inner joining kit
Part No: 39.10011
Flange adaptor -
Hard solder
Part No: 39.20014
Flange adaptor - Hose
clamp attachment
Part No: 39.00009
Suspension hanger
Part No: 39.00015.100
Adaptors
RFS offers a full range of
adaptors to interface to
different line sizes and
connector types, please
refer to separate data sheet
available on request.Straight coupling
Part No: 39.10022
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ RL736 series Date: 25.11.2010
All
info
rmation c
onta
ined in t
he p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Product Description
Size 7 3/16"
Feeder Type Air Dielectric, solid inner and outer
PTFE spacers
Structure
Conductor Material High conductivity copper tube
Outer Conductor OD, mm (in) 181.5 (7.144)
Outer Conductor ID, mm (in) 177.7 (6.996)
Inner Conductor OD, mm (in) 50.8 (2.000)
Inner Conductor ID, mm (in) 48.8 (1.920)
Mechanical Specifications
Weight, kg/m (lb/ft) 11.8 (7.9)
EIA Flange weight kg (lb) 2.5 (5.5)
Standard lengths m (ft) 5.5 (18.0)
Max. indoor clamp spacing m (ft) 2 (6.5)
Max. exterior clamp spacing m (ft) 1.3 (4)
Electrical Specifications
Impedance, Ohm 75 +/-0.5
Velocity, percent 99.8
Peak Power Rating, kW 2884
RF Peak Voltage, Volts 20800
Ordering Information
5.5m length Unflanged RL 54.85500
5.5m length EIA Flanged RL 54.75500
Technical Data Sheet RL736 Series
RFS rigid line components are available for both unpressurized (indoor) and
pressurized, flanged (outdoor) systems.
Sizes available are 7/8", 1 5/8", 3 1/8", 4 1/2", 4 7/8", 6 1/8" and 7 3/16”.
All components are manufactured to the most exacting tolerances.
Other line sizes are available on special order.
• Line inner and outer tubing is of high conductivity, hard-drawn, copper, milled to
exact dimensions. Unflanged components for indoor use are polished and
sprayed with a clear lacquer to maintain a high lustre finish
• Flanges and mitred elbow joints are TIG welded for maximum strength
• Captive PTFE dielectric insulators are used exclusively in lines and elbows to
ensure precision mating and stability of components after assembly
• All inner conductor connectors are silver plated
• All components conform to the relevant EIA or IEC standards
Rigid Line Components 7 3/16” 75 ohm
Specifications
Features
Accessories
Frequency Attenuation Attenuation Average Average
MHz dB/100 m dB/100 ft Power kW 1 Power kW 2
50 0.092 0.028 269 361
88 0.122 0.037 203 272
98 0.129 0.039 192 258
108 0.135 0.041 183 245
150 0.159 0.049 155 208
174 0.171 0.052 144 193
202 0.185 0.056 134 179
240 0.201 0.061 123 165
300 0.225 0.069 110 147
400 0.260 0.079 95 128
470 0.282 0.086 88 118
500 0.291 0.089 85 114
520 0.296 0.090 83 112
600 0.318 0.097 78 104
665 0.335 0.102 74 99
719 0.349 0.106 71 95
Attenuation at 20°C (68°F) cable temperature
Mean power rating at 40°C (104°F) ambient temperature1. Outer temp rise 18°C (64°F), Inner temp rise 80°C (176°F) 2. Outer temp rise 23°C (73°F), Inner temp rise 100°C (212°F)
Applying a dark matt finish will reduce max temp rises.
Attenuation and Average Power
Unflanged Elbow
M-M* 54.00001
M-F 54.00003
F-F 54.00002
* Standard supplyNote: Male unflanged
elbows include coupling
sleeves
EIA Flanged elbow
Part No: 54.00000
Inner joining kit
Part No: 54.10000
Flange adaptor -
Hard solder
Part No: 54.20005
Flange adaptor - Hose
clamp attachment
Part No: 54.00007
Suspension hanger
Part No: 39.00015.100
Adaptors
RFS offers a full range of
adaptors to interface to
different line sizes and
connector types, please
refer to separate data sheet
available on request.
Straight coupling
Part No: 54.10007
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ RL158 AL series Date: 5.09.2014
All
info
rmation c
onta
ined in
the p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Product Description
Size 1 5/8"
Feeder Type Air Dielectric, solid inner and outer PTFE spacers
Structure
Conductor Material, Outer High conductivity aluminium tube
Conductor Material, Inner High conductivity copper tube
Outer Conductor OD, mm (in) 41.28 (1.625)
Outer Conductor ID, mm (in) 38.79 (1.527)
Inner Conductor OD, mm (in) 16.87 (0.664)
Inner Conductor ID, mm (in) 14.94 (0.588)
Mechanical Specifications
Weight, kg/m (lb/ft) 0.91 (0.61)
Standard lengths m (ft) 5.5 (18.0)
Recommended maximum
indoor clamp spacing m (ft) 1.2 (4)
Recommended maximum
Electrical Specifications
Impedance, Ohm 50 +/-0.5
Velocity, percent 99.8
Peak Power Rating, kW 270
RF Peak Voltage, Volts 4700
Ordering Information
5.5m length Unflanged RL 53.35500
Technical Data Sheet RL158 Aluminium Series
RFS rigid line components with aluminium outers are available for unpressurized
(indoor) systems.
Sizes available are 1 5/8", 3 1/8" and 4 7/8".
All components are manufactured to the most exacting tolerances.
Other line sizes are available on special order.
• Line outer tubing is of high conductivity aluminium, and the inner is of hard-
drawn copper, milled to exact dimensions. Unflanged components have a plain
matt finish
• Captive PTFE dielectric insulators are used exclusively in lines and elbows to
ensure precision mating and stability of components after assembly
• All inner conductor connectors are silver plated
• All components conform to the relevant EIA or IEC standards
Rigid Line Components 1 5/8” 50 ohm
Specifications
Features
Accessories
Frequency Attenuation Attenuation Average Average
MHz dB/100 m dB/100 ft Power kW 1 Power kW 2
50 0.45 0.136 22.1 29.6
88 0.59 0.180 16.6 22.3
98 0.62 0.190 15.8 21.1
108 0.65 0.200 15.0 20.1
150 0.77 0.235 12.7 17.1
174 0.83 0.253 11.8 15.8
202 0.90 0.273 11.0 14.7
240 0.98 0.298 10.1 13.5
300 1.09 0.333 9.0 12.1
400 1.26 0.384 7.8 10.5
470 1.37 0.416 7.2 9.6
500 1.41 0.429 7.0 9.3
520 1.44 0.438 6.8 9.2
600 1.54 0.470 6.4 8.5
665 1.62 0.495 6.0 8.1
719 1.69 0.515 5.8 7.8
800 1.78 0.543 5.5 7.4
820 1.80 0.550 5.4 7.3
862 1.85 0.564 5.3 7.1
Attenuation at 20°C (68°F) cable temperature
Mean power rating at 40°C (104°F) ambient temperature1. Outer temp rise 23°C (73°F), Inner temp rise 80°C (176°F) 2. Outer temp rise 30°C (86°F), Inner temp rise 100°C (212°F)
Applying a dark matt finish will reduce max temp rises.
Attenuation and Average Power
Unflanged Cast Aluminium Elbow
M-M non-tunable 36.00028
M-M tunable 36.00027
Field Flange Aluminium Adaptor
Part Number 36.10218.001
Suspension hanger
Part Number 19.00063.100
1-5/8” UF Outer and Inner
Part Number 53.3xxxx
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e i n W i r e l e s s ™ RL 158 AL Series Date 5.09.2014
All
info
rmation c
onta
ined in
the p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Technical Data Sheet RL158 Aluminium Series
Rigid Line Components 1 5/8” 50 ohm
19.00063.X00 SUSPENSION HANGER
ALUMINIUM OUTER TUBE
COPPER INNER TUBE
36.10218.001 FIELD FLANGE AL
Unflanged C ast Aluminium Elbow
M-M tunable Part Number 36.00027
Straight Coupling
Part Number 36.10217
1-5/8 UF Outer and Inner
Part Number 53.3xxxx
Unflanged Cast Aluminium Elbow
M-M non-tunable Part Number 36.00028
Suspension hanger
Part Number 19.00063.100
Field Flange Aluminium Adaptor
Part Number 36.10218.001
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ RL318 AL series Date: 9.09.2014
All
info
rmation c
onta
ined in
the p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Product Description
Size 3 1/8"
Feeder Type Air Dielectric, solid inner and outer
PTFE spacers
Structure
Conductor Material, Outer High conductivity aluminium tube
Conductor Material, Inner High conductivity copper tube
Outer Conductor OD, mm (in) 79.4 (3.125)
Outer Conductor ID, mm (in) 76.8 (3.023)
Inner Conductor OD, mm (in) 33.4 (1.315)
Inner Conductor ID, mm (in) 31.3 (1.232)
Mechanical Specifications
Weight, kg/m (lb/ft) 1.9 (1.26)
Standard lengths m (ft) 5.5 (18.0)
Max indoor clamp spacing m (ft) 1.5 (5)
Electrical Specifications
Impedance, Ohm 50 +/-0.5
Velocity, percent 99.8
Peak Power Rating, kW 920
RF Peak Voltage, Volts 9600
Ordering Information
5.5m length Unflanged RL 53.55500
Technical Data Sheet RL318 Aluminium Series
RFS rigid line components with aluminium outers are available for unpressurized
(indoor) systems.
Sizes available are 1 5/8", 3 1/8" and 4 7/8".
All components are manufactured to the most exacting tolerances.
Other line sizes are available on special order.
• Line outer tubing is of high conductivity aluminium, and the inner is of hard-
drawn copper, milled to exact dimensions. Unflanged components have a plain
matt finish
• Captive PTFE dielectric insulators are used exclusively in lines and elbows to
ensure precision mating and stability of components after assembly
• All inner conductor connectors are silver plated
• All components conform to the relevant EIA or IEC standards
Rigid Line Components 3 1/8” 50 ohm
Specifications
Features
Accessories
Frequency Attenuation Attenuation Average Average
MHz dB/100 m dB/100 ft Power kW 1 Power kW 2
50 0.23 0.069 71 96
88 0.30 0.092 54 72
98 0.32 0.097 51 68
108 0.33 0.101 49 65
150 0.39 0.119 41 55
174 0.42 0.129 38 51
202 0.45 0.139 36 48
240 0.50 0.151 33 44
300 0.55 0.169 29 39
400 0.64 0.195 25 34
470 0.69 0.212 23 31
500 0.72 0.218 23 30
520 0.73 0.222 22 30
600 0.78 0.239 21 28
665 0.83 0.252 20 26
719 0.86 0.262 19 25
800 0.91 0.276 18 24
820 0.92 0.279 18 24
862 0.94 0.286 17 23
Attenuation at 20°C (68°F) cable temperature
Mean power rating at 40°C (104°F) ambient temperature1. Outer temp rise 23°C (73°F), Inner temp rise 80°C (176°F) 2. Outer temp rise 30°C (86°F), Inner temp rise 100°C (212°F)
Applying a dark matt finish will reduce max temp rises.
Attenuation and Average Power
Unflanged Cast Aluminium Elbow
M-M non-tunable 37.00078
M-M tunable 37.00077
Field Flange Aluminium Adaptor
Part Number 37.10486.001
Suspension hanger
Part Number 19.00064.1003-1/8” UF Outer and Inner
Part Number 53.5xxxx
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e i n W i r e l e s s ™ RL 318 AL Series Date 09.09.2014
All
info
rmation c
onta
ined in
the p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Technical Data Sheet RL318 Aluminium Series
Rigid Line Components 3-1/8” 50 ohm
COPPER INNER TUBE
ALUMINIUM OUTER TUBE
19.00064.X00 SUSPENSION HANGER
37.10486.001 FIELD FLANGE AL
3-1/8” UF Outer and Inner
Part Number: 53.5xxxx
Unflanged Cast Aluminium Elbow
M-M non-tunable Part Number 37.00078Unflanged Cast Aluminium Elbow
M-M tunable Part Number 37.00077
Straight coupling Part Number 37.10485
Field Flange Aluminium Adaptor
Part Number 37.10486.001
Suspension hanger
Part Number 19.00064.100
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ RL478 AL series Date: 9.09.2014
All
info
rmation c
onta
ined in
the p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Product Description
Technical Data Sheet RL478 Aluminium Series
RFS rigid line components with aluminium outers are available for unpressurized
(indoor) systems.
Sizes available are 1 5/8", 3 1/8" and 4 7/8".
All components are manufactured to the most exacting tolerances.
Other line sizes are available on special order.
• Line outer tubing is of high conductivity aluminium, and the inner is of hard-
drawn copper, milled to exact dimensions. Unflanged components have a plain
matt finish
• Captive PTFE dielectric insulators are used exclusively in lines and elbows to
ensure precision mating and stability of components after assembly
• All inner conductor connectors are silver plated
• All components conform to the relevant EIA or IEC standards
Rigid Line Components 4 7/8” 50 ohm
Specifications
Features
Accessories
Attenuation and Average Power
Unflanged Cast Aluminium Elbow
M-M non-tunable 51.00024
M-M tunable 51.00023
Field Flange Aluminium Adaptor
Part Number 51.10223.001
Suspension hanger
Part Number 19.00920.1004-71/8” UF Outer and Inner
Part Number 53.7xxxx
Size 4 7/8"
Feeder Type Air Dielectric, solid inner and outer
PTFE spacers
Structure
Conductor Material, Outer High conductivity aluminium tube
Conductor Material, Inner High conductivity copper tube
Outer Conductor OD, mm (in) 123.2 (4.850)
Outer Conductor ID, mm (in) 120 (4.724)
Inner Conductor OD, mm (in) 52.1 (2.051)
Inner Conductor ID, mm (in) 50.1 (1.972)
Mechanical Specifications
Weight, kg/m (lb/ft) 3.7 (2.48)
Standard lengths m (ft) 5.5 (18.0)
Max. indoor clamp spacing m (ft) 2 (6.5)
Electrical Specifications
Impedance, Ohm 50 +/-0.5
Velocity, percent 99.8
Peak Power Rating, kW 2160
RF Peak Voltage, Volts 14700
Ordering Information
5.5m length Unflanged RL 53.75500
Frequency Attenuation Attenuation Average Average
MHz dB/100 m dB/100 ft Power kW 1 Power kW 2
50 0.14 0.044 153 205
88 0.19 0.059 115 154
98 0.20 0.062 109 146
108 0.21 0.065 104 139
150 0.25 0.077 88 118
174 0.27 0.082 82 110
202 0.29 0.089 76 102
240 0.32 0.097 70 93
300 0.36 0.108 62 84
400 0.41 0.125 54 72
470 0.44 0.135 50 67
500 0.46 0.140 48 65
520 0.47 0.143 47 63
600 0.50 0.153 44 59
665 0.53 0.161 42 56
719 0.55 0.168 40 54
800 0.58 0.177 38 51
820 0.59 0.179 38 51
862 0.60 0.183 37 49
Attenuation at 20°C (68°F) cable temperature
Mean power rating at 40°C (104°F) ambient temperature1. Outer temp rise 23°C (73°F), Inner temp rise 80°C (176°F) 2. Outer temp rise 30°C (86°F), Inner temp rise 100°C (212°F)
Applying a dark matt finish will reduce max temp rises.
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e i n W i r e l e s s ™ RL 478 AL Series Date 09.09.2014
All
info
rmation c
onta
ined in
the p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Technical Data Sheet 478 Aluminium Series
Rigid Line Components 4 7/8” 50 ohm
53.7XXXX RIGID LINE UF AL
COPPER INNER TUBE
ALUMINIUM OUTER TUBE
19.00920.X00 SUSPENSION HANGER
51.10223001 FIELD FLANGE AL
4-7/8” UF Outer and Inner
Part Number: 53.7xxxx
Unflanged Cast Aluminium Elbow
M-M non-tunable Part Number 51.00023
Unflanged Cast Aluminium Elbow
M-M tunable Part Number 51.00024
Straight coupling Part Number 51.10222
Field Flange Aluminium Adaptor
Part Number 51.10223.001
Suspension hanger
Part Number 19.00920.100
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ CMR Monitor Date: 12.06.2009
All
info
rmation c
onta
ined in t
he p
resent
bro
chure
is s
ubje
ct
to c
onfirm
ation a
t tim
e o
f ord
ering
Product Description
Model CMR
Application Power monitoring
Display format Numeric + bar graph
Frequency Range* 30 to 1000 MHz
RF Input Dynamic Range** >60 dB
RF Connector Type** N (M)
Certifications*** CE, UL
Power Supply 100 to 240 VAC, 50 to 60 Hz
Operating temperature 0 to +50 °C
Storage temperature -20 to +60 °C
Notes:
*Standard model covers the FM, VHF and UHF frequency bands. Optional frequency variants (100 kHz to 2.7 GHz) are available to order.
**Using RFS High Dynamic Range RF Power Detectors.
***The certifications apply to the human machine interface (HMI) display module, PLC and power supply in the Digital Power Monitoring Display
system.
Technical Data Sheet CMR Monitor
This product provides a real-time display and simple user interface for
RF power monitoring applications.
The module interfaces to one or two RFS High Dynamic Range RF
Power Detectors via a Modbus/RS485 serial interface.
When equipped with one detector, the display can be used for either
forward or reflected power monitoring.
Equipped with two detectors, the module can also display VSWR and
return loss measurements. Note that the two detector configuration can
also be used for monitoring forward or reflected power at two separate
points.
Two VSWR alarm relay outputs are provided via a programmable logic
controller (PLC). Two high/low power threshold alarms are also
available. The PLC interfaces to the display module via an RS232 serial
interface.
A second Modbus/RS485 serial port on the PLC can be used to
interface the CMR to an existing Network Management System, so that
measurements can be viewed at a remote locality such as a Network
Operations Centre.
In addition to power monitoring screens, a set up screen is provided to
allow users to select full-scale deflection (FSD) for bar-graph
measurements. The user can also configure VSWR and high/low power
threshold alarms at the set up screen.
Features
• Simple touch-screen interface
• 5.7-inch display (256 colour)
• Measurements displayed in numeric and bar-graph formats
• Configurable high/low power alarm thresholds
• Operates from 100 to 240 V AC supply
• Modbus/RS485 interface to RF detector modules
Power Monitoring Display
Specifications
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ MSV2 Monitor ANA1-1020 Iss1 /14.03.08All
info
rmat
ion
cont
aine
d in
the
pres
ent b
roch
ure
is s
ubje
ct to
con
firm
atio
n at
tim
e of
ord
erin
g
Product Description
Model MSV2Opto-isolated switch inputs 8 (standard)Modbus/RS485 interface 1 (supports up to 200 devices)Relay outputs 8 (standard) NO and NC contacts rated 100 VDC 0.5 A.Display SVGA colour, 8" resistive touch screenPanel PC I/O 2 x COM ports, 2 x USB 1.1 (client and host), 1 x EthernetHousing Panel PC mounts on front panel of switch frameWeight 1.4 kg (panel PC only)Operating temperature 0 to +50°CStorage temperature 0 to +70°C
Technical Data Sheet MSV2 Monitor
This system provides a complete range of monitoring functions for output coaxialequipment, allowing broadcasters to display forward/reflected transmitter powerand an active mimic display of U link/motorized switch and multi-channelcombiner configurations. The unit uses a touch screen panel PC providingprogrammable functions and alarm outputs.
A Modbus/RS485 input handles up to 200 devices, including RFS detectors andinput/output modules. Other customer-specific Modbus modules can be added asrequired.
The RF monitoring system is expandable for alarming systems with up to 14transmitters (in the standard configuration). Alarms can be reset from the PCtouch screen display, or via the web interface if required. Sensor modules, eachproviding 8 opto-isolated inputs, can be added to the system to provide detailedstatus on equipment such as U link switches.
Display is a bright 8" SVGA colour touch screen with 800 x 600 pixel resolution.The operating system for the touch screen PC is Windows CE 5.0.
An Ethernet connection to the panel PC enables the system to be viewedremotely using a web browser. SNMP is also supported, allowing the monitoringsystem to be integrated into a Network Management System.
Features• Handles up to 200 Modbus/RS485 devices, including RF detectors and I/O
modules.• High accuracy detectors available for measurement of RF power.• Can alarm up to 14 transmitters (standard configuration).• U link and motorised switch inputs (8 in standard configuration).• Real-time mimic display and setting of alarm thresholds via touch screen PC.• Operates from 100 to 240 VAC 50 / 60 Hz supply.• Remote monitoring via LAN / WAN using a web browser. • SNMP also supported for integration into Network Management System.
RF Monitor System
Example user interface screens (touch screennormally mounted on front panel of switch frame).
Specifications
Radio Frequency SystemsPlease visit us on the internet at http://www.rfsworld.com
R F S T h e C l e a r C h o i c e ™ MSV2.1 Monitor Date: 21.02.2013All
info
rmat
ion
cont
aine
d in
the
pres
ent b
roch
ure
is s
ubje
ct to
con
firm
atio
n at
tim
e of
ord
erin
g
Product Description
Model MSV2.1Opto-isolated switch inputs 8 (standard)Modbus/RS485 interface 1 (supports up to 200 devices)Relay outputs 8 (standard) NO and NC contacts rated 100 VDC 0.5 A.Display VGA 5.7” colour, resistive touch screenPanel PC I/O 2 x COM ports, 2 x USB 1.1 (client and host), 1 x Gigabit EthernetHousing Panel PC mounts on front panel of switch frameWeight 1.4 kg (panel PC only)Operating temperature 0 to +45°CStorage temperature -20 to +60°C
Technical Data Sheet MSV2.1 Monitor
This system provides a complete range of monitoring functions for output coaxial equipment, allowing broadcasters to display forward/reflected transmitter power and an active mimic display of U link/motorized switch and multi-channel combiner configurations. The unit uses a touch screen panel PC providing programmable functions and alarm outputs.
A Modbus/RS485 input handles up to 200 devices, including RFS detectors and input/output modules. Other customer-specific Modbus modules can be added as required.
The RF monitoring system is expandable for alarming systems with up to 14 transmitters (in the standard configuration). Alarms can be reset from the PC touch screen display, or via the web interface if required. Sensor modules, each providing 8 opto-isolated inputs, can be added to the system to provide detailed status on equipment such as U link switches.
Display is a bright 5.7” VGA colour touch screen with 640 x 480 pixel resolution. The operating system for the touch screen PC is Windows CE 5.0.
An Ethernet connection to the panel PC enables the system to be viewed remotely using a web browser. SNMP is also supported, allowing the monitoring system to be integrated into a Network Management System.
Features• Handles up to 200 Modbus/RS485 devices, including RF detectors and I/O
modules.• High accuracy detectors available for measurement of RF power.• Can alarm up to 14 transmitters (standard configuration).• U link and motorised switch inputs (8 in standard configuration).• Real-time mimic display and setting of alarm thresholds via touch screen PC.• Operates from 100 to 240 VAC 50 / 60 Hz supply.• Remote monitoring via LAN / WAN using a web browser. • SNMP also supported for integration into Network Management System.
RF Monitor System
Example user interface screens (touch screen normally mounted on front panel of switch frame).
Specifications
Features