technical information
DESCRIPTION
HS 101 SINGLE CORNER WELDING MACHINE. FEATURE Pneumatic and fully automatic. PVC profiles used for joining the corner. Source and profile allows you to adjust the pressure. Heating for waiting times (and analog) can be adjusted. Resource angles can be adjusted between 30-180 degrees. - PowerPoint PPT PresentationTRANSCRIPT
TECHNICAL INFORMATION
HS 101 SINGLE CORNER WELDING MACHINE
FEATUREPneumatic and fully automatic.
PVC profiles used for joining the corner.Source and profile allows you to adjust the pressure.
Heating for waiting times (and analog) can be adjusted.
Resource angles can be adjusted between 30-180 degrees.
Micro ComputerControl System
185 kgMachine Weight
1400 mmMachine Height
650 mmMachine Width
500 mmMachine Length
250°C (+/-)%10Heater Temperature
25 s(+/-)%10Resource Time
25 s(+/-)%10Heating Time
120 mmMax. Profile Width
120 mmMax. Height profile
150 Lt./minAir Consumption
6-8 BarAir Pressure
2 KwTotal Power
220 V / 50 HzVoltage / Frequency
TECHNICAL INFORMATION
HS 201 AUTOMATIC MULLION Milling Machine
FEATUREPneumatic and fully automatic.
Fastening the middle register is used for connections of PVC profiles.Recording medium allows the practice profiles of different angles.
Pneumatic clamping system allows.
380 V / 50 Hz
1,5 Kw
6-8 Bar
31 Lt./min
120 mm
120 mm
670 mm
450 mm
Machine Height 1120 mm
Machine Weight 85 kg
Voltage / Frequency
Total Power
Air Pressure
Air Consumption
Max. Height profile
Max. Profile Width
Machine Length
Machine Width
CITA HS301 AUTOMATIC CUTTING MACHINE
FEATUREPneumatic and fully automatic.
Screed is suitable for cutting PVC profiles 45 degrees.Feed can be adjusted for the horizontal vibration and precise cuts.
Pneumatic clamping system.
Voltage / Frequency380 V / 50 Hz
Total Power 2 x 1,5 Kw
Air Pressure6-8 Bar
Air Consumption40 Lt./min
Saw Diameter 32 x 200 mm
Machine Length 1120 mm
Machine Width 5000 mm
Machine Height 1000 mm
Machine Weight 160 kg
Table Length 2000 mm
TECHNICAL INFORMATION
HS 401 AUTOMATIC MACHINE FOR CUTTING OUT ALTAN
FEATUREPneumatic and fully automatic.Suitable for cutting PVC profiles.
45 ° -90 ° -45 ° angles has a value for the special spot.Saw feed can be adjusted.
Pneumatic clamping system can be cut between 25 ° -0 ° -25 ° angles.
Diamond saw blade diameter 400 mm.Meter system, dayaması machine and bench accessories.
380 V / 50 Hz
2,2 Kw
6-8 Bar
76 Lt./min
Ø 400
100 mm
120 mm
580 mm
581 mm
1200 mm
170 kg
2400 mm
Total Power
Air Pressure Air Consumption Saw Diameter Max. Height profile Max. Profile Width Machine Length Machine Width Machine Height Machine Weight Table Length
TECHNICAL INFORMATION
HS 501 Pantograph DISCHARGING WATER DRILLING MILLING MACHINE OF 3-ARM
Pneumatic and fully automatic.PVC profiles the key areas where the hinge slots and holes for the arm is used.Yarıklarını various angles used to open the drain.Vertical axis, head of copies, triple drilling horizontal axis.Universal template is available, upon request made in the template.
Voltage / Frequency 380 V / 50 Hz
Total Power 1,1 Kw
Air Pressure 6-8 Bar
Air Consumption 81 Lt./min
Machine Length 620 mm
Machine Width 900 mm
Machine Height 1350 mm
Machine Weight 150 kg
Control System Elektropnomatik
TECHNICAL INFORMATION
FEATURE
HS 601 AUTOMATIC CORNER CLEANING MACHINE
Pneumatic and fully automatic.Corner cleaning is used to make PVC profiles after welding.Upper and outer surfaces of the lower-corners clean.Blade models are 2-4-6-8 when prompted.
Voltage / Frequency 380 V / 50 Hz
Total Power 2,2 Kw
Air Pressure 6-8 Bar
Air Consumption 81 Lt./min
Max. Height profile 120 mm
Max. Profile Width 120 mm
Machine Length 1050 mm
Machine Width 750 mm
Machine Height 1400 mm
Machine Weight 270 kg
Control System Microcom
FEATURE
TECHNICAL INFORMATION