6

ORALORALORALORAL PRESENTATIONPRESENTATIONPRESENTATIONPRESENTATIONSSSS

WEDNESDAY, (SEPTEMBEWEDNESDAY, (SEPTEMBEWEDNESDAY, (SEPTEMBEWEDNESDAY, (SEPTEMBER, 12R, 12R, 12R, 12THTHTHTH)))) 10:45 – 11:30 KEYNOTE 1: Prof. KANJI ONO

Research and Applications of AE on Advanced

Composites SESSION 1: AE in Different Applications

Chairs: G. Shen and J. Grum Room: Granada Hall

13:30 - 13:50 AE and Other Observations during Cyclic

Testing of A572 Steel Laboratory Specimens Adrian A. POLLOCK, USA

13:50 - 14:10 Quantitative Acoustic Emission Measurement of Laser Peening Manabu ENOKI, Kazutaka KOBAYASHI, Tomoki TAKATA, Akinori MATSUI, Yuji KOBAYASHI, Japan

14:10 - 14:30 Health Monitoring of a NEG-MICON 750kW Wind Turbine Blades with Acoustic Emission Dimitrios PAPASALOUROS, Nikos TSOPELAS, Ioannis LADIS, Dimitrios KOUROUSSIS, Athanasios ANASTASOPOULOS, Denja LEKOU, Fragiskos MOUZAKI, Greece

14:30 - 14:50 Correlation Between Acoustic Emission and

Torque in Drilling Martin GOMEZ, José RUZZANTE, Argentina

SESSION 2: AE in Advanced Composites Chairs: M. Hamstad and I. Baran

Room: Mediterraneo Hall 13:30 - 13:50 Failure Analysis of NOL-Ring Specimens by

Acoustic Emission Marina PLÖCKL, Markus G.R. SAUSE, Joachim SCHARRINGHAUSEN, Siegfried HORN, Germany

13:50 - 14:10 An Investigation of the Static Damage

Mechanisms of Pultruded Glass Fiber

Reinforced Polymers with Artificial Neural Networks Davide CRIVELLI, Mario GUAGLIANO, Alberto MONICI, Italy

14:10 - 14:30 Evaluation of the Destruction Process of Metal-

7

Composite Cylinders with Use of Acoustic Emission Method Jerzy SCHMIDT, Marek NOWAK, Ireneusz BARAN, Poland

SESSION 3: AE in Aerospace Structures and Composites Chairs: M. Chlada and Y. Mizutani

Room: Granada Hall 15:00 - 15:20 Non Destructive Testing of GAIA Frame by

Means of Acoustic Emission Monitoring During

Launch Simulation Tests Franck LEVALLOIS, André SOBECZKO, Alain PROUST, Jean-Claude LENAIN, France

15:20 - 15:40 Benefits of Acoustic Emission for the Testing of

Aerospace Composite Assemblies Louis ADAM, Elodie BONHOMME, Clément CHIROL, Alain PROUST, France

15:40 - 16:00 Remote AE Monitoring of Fatigue Crack Growth

in Complex Aircraft Structures Milan CHLADA, Zdenek PREVOROVSKY, Czech Republic

SESSION 4: AE in Wood and Biological Applications Chairs: M. Gómez and S. Rosner

Room: Mediterraneo Hall 15:00 - 15:20 Acoustic Emission Related to Stomatal Closure

of Four Deciduous Broad-Leaved Woody

Species Sabine ROSNER, BOKU Vienna, Austria

15:20 - 15:40 Correlation of Sap Flow Changes in Trees with

Signal of Acoustic Emission during Field Measurements Pavel MAZAL, Michal CERNY, Frantisek VLASIC, Libor NOHAL, Czech Republic

15:40 - 16:00 Investigation of Failure Processes in the

Human Femur Using Signal-Based Acoustic Emission Techniques Florian STARK, Fabian MALM, Eduardo GRANDE GARCIA, Peter FÖHR, Rainer H. BURGKART, Franziska REIDL, Christian GROSSE, Germany

SESSION 5: AE Signal Processing and Source Location (1) Chairs: A. Vinogradov and V. Barat

Room: Granada Hall 16:30 – 16:50 AE Signal Processing in Dynamical Tests of

8

Reinforced Concrete Structures Miguel Eduardo ZITTO, Mariano SCARAMAL, Francisco A. SAGASTA , Rosa PIOTRKOWSKI, Antolino GALLEGO, Enrique CASTRO, Argentina

16:50 – 17:10 Real-time Acoustic Emission Classification: New evolutionary Approach Eraldo POMPONI, Alexei VINOGRADOV, Russia

17:10 – 17:30 Acoustic Emission Source Location in Steel Structures Using a Wavelet Transform Analysis

and Modal Location Theory Shukri MOHD, Karen HOLFORD, Rhys PULLIN, United Kingdom

17:30 – 17:50 Use of Lamb Wave Dispersion Curves Extraction from AE Signal Spectrogram for

Determination of Distance to AE Source Denis TERENTYEV, Yuri BORODIN, Russia

17:50 – 18:10 Comparison of Time of Arrival and Delta T

Source Location for Acoustic Emission in GLARE John Patrick MCCRORY, Rhys PULLIN, Matthew Robert PEARSON, Mark Jonathan EATON, Carol A FEATHERSTON, Karen M HOLFORD, United Kingdom

SESSION 6: AE in Pipelines, Vessels, Tanks and Leaks (1) Chairs: M. Peacock and R. Reuben

Room: Mediterraneo Hall 16:30 – 16:50 Monitoring Erosion-Corrosion in Carbon Steel

Elbow Using Acoustic Emission Technique Mohamed SHEHADEH, Ibrahim HASSAN, Hany MOURAD, Hassan EL-GAMAL, Egypt

16:50 – 17:10 Location of Leaks in Liquid filled Pipelines under Operation Thomas THENIKL, Hartmut VALLEN, Dirk ALJETS, Germany

17:10 – 17:30 Analytical Verification of the Active AE Sources

in the Integrated SHM Systems Igor RAZUVAEV, Evgeny A. SUCHKOV, Russia

17:30 – 17:50 Acoustic Emission Monitoring of High

Temperature Crack Propagation in AISI 304L and P265GH Catherine HERVE, Fethi DAHMENE, Abdelouaedh LAKSIMI, Lionel JAUBERT, Said HARIRI, Mohammed CHERFAOUI, Anne MOUFTIEZ,

9

France

17:50 – 18:10 Theoretical Analysis and Experimental Study of Gas Pipeline Leak Acoustic Emission Signal

Transmit Speed Gongtian SHEN, Xianyong QIN, Renyang HE, Changzheng XILI, China

10

THURSDAYTHURSDAYTHURSDAYTHURSDAY, (SEPTEMBER, 1, (SEPTEMBER, 1, (SEPTEMBER, 1, (SEPTEMBER, 13333THTHTHTH))))

SESSION 7: AE Sensors and Transducers Chairs: P. Benes and H. Vallen

Room: Granada Hall 09:00 - 09:20 Primary Calibration of Acoustic Emission

Sensors by the Method of Reciprocity,

Theoretical and Experimental Considerations Seydou DIA, Thomas MONNIER, Nathalie GODIN, Fan ZHANG, France

09:20 - 09:40 Absolute Calibration of Acoustic Emission Transducers as per CEN ISO/TR 13115 in Disuse

of Mechanical Sound Sources or Reference

Transducers Hajime HATANO, Japan

09:40 - 10:00 Acoustic Emission Monitoring of Tensile Tests on Packaged

Piezoceramic Wafer Transducers Andreas J. BRUNNER, Florian BACHMANN, Switzerland

10:00 - 10:20 Comparison of Methods for Absolute Calibration

of Wideband AE sensors Petr BENES, Jiri FIALKA, Czech Republic

SESSION 8: AE in Geological Applications and Rocks Chairs: E. Proverbio and G. Manthei

Room: Mediterraneo Hall 09:00 - 09:20 Acoustic Emission and Ultrasonic Transmission

Monitoring of Hydraulic Fracture Initiation and Propagation in Rock Samples Sergey STANCHITS, Aniket SURDI, Roberto SUAREZ-RIVERA, USA

09:20 - 09:40 Application of the Cluster Method on Acoustic Emission Events in Salt Rock Specimen Gerd MANTHEI, Jürgen EISENBLÄTTER, Germany

09:40 - 10:00 Acoustic Emission on the Peteroa Volcano

(2009-2011), Argentina Maria Isabel LOPEZ PUMAREGA, Cynthia HUCAILUK, Giovanni P. GREGORI, Grabiele PAPARO, Jose Evaristo RUZZANTE, Nicolas NUÑEZ, Giuliano VENTRICE, Claudio RA-FANELLI Argentina

10:00 - 10:20 RQA Applied to Acoustic Emissions Time Series to Pinpoint Feasible Precursors of Catastrophic

11

Geological Events Maurizio POSCOLIERI, Claudio RAFANELLI, Giovanna ZIMATORE, Italy

10:50 - 11:30 KEYNOTE 2: Prof. TOMOKI SHIOTANI Recent advances of AE technology for damage

assessment of infrastructures SESSION 9: AE in Industrial and Transport Chairs: A. Anastasopoulos and A. Brunner

Room: Granada Hall 11:30 - 11:50 Use of AE Method for Detecting Quality of

Injection Mold Engraving Inserts Dragan KUSIC, Tomaz KEK, Janez Marko SLABE, Rajko SVECKO, Janez GRUM, Slovenia

11:50 - 12:10 Acoustic Emission in Diesel Engines – A Time

Series Model for the Injection Process Wael ABDOU, Nikolaos BALODIMOS, Bob REUBEN, United Kingdom

12:10 - 12:30 Acoustic Emission (AE) Monitoring on Transport

Products Peter TSCHELIESNIG, Austria

12:30 - 12:50 Acoustic Emission Monitoring of Structural

Elements a Ship for Detection of Fatigue and Corrosion Damages Ireneusz BARAN, Marek NOWAK, Andreas JAGENBREIN, Henryk BUGLACKI, Poland

SESSION 10: AE in Electrochemical Applications and Materials Characterization

Chairs: S. Wakayama and A. Laksimi Room: Mediterraneo Hall

11:30 - 11:50 Acoustic Methods as a Tool for Management of Electrochemical Process of Energy Nina KIRCHEVA, Sylvain TANT, Benoit LEGROS, Sylvie GENIES, Sebastien ROSINI, Pierre Xavier THIVEL, France

11:50 - 12:10 On the Use of the Acoustic Emission Technique for in-situ Monitoring of the Pulverization of

Battery Electrodes Aurélien ETIEMBLE, Hassane IDRISSI, Lionel ROUÉ, France

12:10 - 12:30 Magneto Acoustic Emission and Barkhausen Noise in A 508 Class II Steel Miriam Rocio NEYRA ASTUDILLO, Nicolás NUÑEZ, Isabel LOPEZ PUMAREGA, Darío N. TORRES, José RUZZANTE, Argentina

12

12:30 - 12:50 Experimental Research on Cavitation Erosion Detection Based on Acoustic Emission

Technique Yongyong HE, Zaiyang Shen, China

SESSION 11: AE for Material Characterization Chairs: A. Pollock and E. Martínez

Room: Granada Hall 14:00 - 14:20 Assessment of Sound Emission Phenomena at a

Boundary Layer During Steel Quenching Franc RAVNIK, Janez GRUM, Slovenia

14:20 - 14:40 Evaluation of AE Sources during Tensile

Deformation of Al-Mg-Si Alloys with Different Heat Treatment Kenichi YOSHIDA, Yuichi TOKUYAMA, Yoshihiro YASUHARA, Hideo NISHINO, Japan

14:40 - 15:00 Mechanisms of Plastic Deformation and Acoustic Emission in ZK60 Mg Alloy Alexei VINOGRADOV, Alexei DANYUK, Eraldo POMPONI, Russia

15:00 - 15:20 Effect of Plastic Strain on Low-Cycle Fatigue Life and Fatigue Damage Detection Yoshihiro MIZUTANI, Makoto OHTA, Akira TODOROKI Japan

15:20 - 15:40 AE Studies on the Durability of Flexible Dye-

Sensitized Solar Cells Shuichi WAKAYAMA, Nobuyuki TAKAGI, Takenobu SAKAI, Masashi IKEGAMI, Tsutomu MIYASAKA, Japan

SESSION 12: AE in Signal Processing and Source Location (2) Chairs: R. Piotrkowski and F. Rauscher

Room: Mediterraneo Hall. 14:00 - 14:20 Application of ICI Principle for the First-Arrival

Time Correction Vera BARAT, Sergey ELIZAROV, Irina KOVALCHUK, Evgeniy BOLOKHOV, Russia

14:20 - 14:40 Using X22-Correlation for Subclustering and

Relative Location of Acoustic Amission Signals Franz RAUSCHER, Austria

14:40 - 15:00 AE Event Detection under Noisy Environment with Continuous Waveform

13

Recording and Multiple Thresholds Kaita ITO, Hitoshi KURIKI, Seiji KURODA, Manabu ENOKI, Japan

15:00 - 15:20 Acoustic Emission Defects Localized by Means of Geodetic Iterative Procedure - Algorithms,

Tests, AE Experiment Vaclav KUS, Michal ZAVESKY, Zdenek PREVOROVSKY Czech Republic

15:20 - 15:40 Research on Source Location for Acoustic

Emission Jiang YU, XuFei YUN, China

14

FRIDAY, (SEPTEMBER, FRIDAY, (SEPTEMBER, FRIDAY, (SEPTEMBER, FRIDAY, (SEPTEMBER, 14141414THTHTHTH))))

SESSION 13: AE in Advanced Materials and Lamb Waves Chairs: Z. Prevorovsky and A. Proust

Room: Granada Hall 09:00 - 09:20 A Waveform-Based Study of AE Wave

Propagation by Use of Eight Sensors on a

Composite Pressure Vessel Marvin HAMSTAD, USA

09:20 - 09:40 Influence of Internal Discontinuities on

Ultrasonic Signal Propagation in Carbon Fiber Reinforced Plastics Markus SAUSE, Siegfried HORN, Germany

09:40 - 10:00 An Improved Acousto-Ultrasonic Scheme with

Lamb Wave Mode Separationand Damping Factor in CFRP Plates Antolino GALLEGO, Kanji ONO, Spain

SESSION 14: AE in Pipeline, Vessels, Tanks and Leaks (2) Chairs: C. Herve and E. Romero

Room: Mediterraneo Hall. 09:00 - 09:20 Remote Sensing of Leaks Parameters by

Acoustic Emission Method Evgeny NEFEDYEV, Russia

09:20 - 09:40 Qualification of the Acoustic Emission Method for Leak Detection in the Main Primary Loop of

the Pressurized Water Reactors During its Hydraulic Pressure Test Yann FORESTIER, Zhang FAN, Laurent TRUCHETTI, France

09:40 - 10:00 Analysis of Corrosion Processes and Leaks in Aboveground Storage Tanks in Aspect of AE

Monitoring system Ireneusz BARAN, Gerald LACKNER, Poland

10:00 - 10:20 Improved Noise Discrimination for Ammonia

Tank Testing Martin J PEACOCK, United Kingdom

15

10:50 - 11:30 KEY NOTE 3: Prof. ZDENEK PREVOROVSKY Progressive Approaches to Localization and

Identification of AE Sources

SESSION 15: AE in Concrete and Construction Materials Chairs: T. Shiotani and C. Grosse

Room: Granada Hall 11:30 - 11:50 Initial Results on Acoustic Amission Detection

in Masonry with Optical Fibre Sensors Els VERSTRYNGE, Martine WEVERS, Belgium

11:50 - 12:10 Multivariate and Artificial Neural Network Analyses of AE Data during Long Time Corrosion

Monitoring of a Post-Tensioned Concrete Beam Edoardo PROVERBIO, Luigi CALABRESE, Giuseppe CAMPANELLA, Italy

12:10 - 12:30 Low-Level AE During Long-Term Monitoring of

Concrete Adrian A. POLLOCK, Jianguo (Peter) YU, Paul ZIEHL, USA

SESSION 16: AE in Large Structures Chairs: P. Tscheliesnig and V. Svoboda

Room: Mediterraneo Hall. 11:30 - 11:50 Experience of Acoustic Emission Method

Application for Estimation of Building Structures

Condition Alexander SAGAIDAK, Sergey Elizarov, Russia

11:50 - 12:10 Guide for Acoustic Emission Examination of Reinforced Concrete Bridges Gregory MURAVIN, Boris MURAVIN, Israel

12:10 - 12:30 Damages Monitoring for Oil&Gas Pipeline using AE Technique Sergio BUDANO, Antonio LUCCI, Roberto PIANCALDINI, Luca PRANDI, GIUSEPPE GIUNTA, Italy

SESSION 17: AE Instrumentation and Courses Chairs: M. Enoki and I. López-Pumarega

Room: Granada Hall

13:40 - 14:00

The Multipurpose Portable NDT Device

“UNISCOPE” Sergey Vladimirovich ELIZAROV, Alexander L. ALYAKRITSKIY, Vassily G. KOLTSOV, Vera A. BARAT, Pavel N. TROFIMOV, Russia

16

14:00 - 14:20 New Intrinsically Safe Acoustic Emission Sensor System for Use on Tank Ships Hartmut VALLEN, Thomas THENIKL, Germany

14:20 - 14:40 Nondestructive Evaluation Courses for

Undergraduate Engineering and Engineering Technology Students Vladimir GENIS, Adrian POLLOCK, USA

14:40 - 15:00 Developing an Acoustic Emission Measuring System Based on Modular High Speed Data

Acquisition Devices Gabor POR, Laszlo DOSZPOD, Tibor DOBJAN Hungary

SESSION 18: General aspects in AE Chairs: M. Sause and K. Yoshida

Room: Mediterraneo Hall. 13:40 - 14:00 Modeling of the Far-Field Acoustic Emission

from a Crack Under Stress Warida BEN KHALIFA, Karim JEZZINE, Sébastien GRONDEL, Alain LHÉMERY, Sylvain CHATILLON, France

14:00 - 14:20 MACSIM: A Cooperative Project to Specify, Develop and Validate a Tool for Simulating AE

Examinations. Alain LHÉMERY, Mabrouk BEN TAHAR, Fabrice FOUCHER, Alain MESINELE, Patrick RECOLIN, Fan ZHANG, France

14:20 - 14:40 Acoustic Emission during Crack Growth by a

Hybrid Semi-Analytical/BEM Model Mabrouk BEN TAHAR, Gaetan HELLO, Nacera BEDRICI, France

17

POSTERS POSTERS POSTERS POSTERS PRESENTATIONSPRESENTATIONSPRESENTATIONSPRESENTATIONS

ID12

ID21

Identify Concrete Quality and Crack Detection Using Acoustic Emission

Technique

Amr Hussain MAHMOUD, Egypt Development and Future Aspect of Acoustic Emission Data Processing

Methods

Yan CHENG, Australia ID36 Study of Wind Turbine Blades under Static Loading Using Acoustic Emission

Method

Mohamed SHEHADEH, Egypt ID37

ID47

Damage Evaluation for Type-ll CNG Cylinder by the Analysis of AE

parameters During Fatigue Test

Hyun Sup JEE, Korea

On the Potential use of Acoustic Emission Testing to Control

Composite Tanks in Service Conditions Salah RAMADAN, France

ID50 Acoustic Emission from Transformation of the Textures of TRIP Steel

Gabor POR, Hungary ID51

ID57

ID58

Acoustic Emission During Tensile Test and ECAP

Gabor POR, Hungary Determinants of Damage Grade for Vehicle CNG Cylinder by the Analysis of

AE Features

Hyun Sup JEE, Korea Delamination Evaluation in CFRP Specimens via Acoustic Emission Modal

Analysis

José MARTíNEZ, Spain ID64 Acoustic Emission in Cerro Blanco, Argentina

Cynthia HUCAILUK, Argentina

ID67 Non Destructive Testing as a Tool for Monitoring Concrete Behaviour at

Hardening and Setting

Lubos PAZDERA, Czech Republic

ID68 Crack Detection of Concrete Slab made from Different Concrete Mixtures by

Acoustic Emission Method

Libor TOPOLAR, Czech Republic

ID70

ID 75

Character of Acoustic Emission Signal Generated During Plastic

Deformation

Jan CRHA, Czech Republic Experimental Study on Feature Selection Using Artificial AE Sources

Gabriel CSEFALVAY, Czech Republic

ID76

Stages of Bending Fatigue of Titanium Alloys and their Identification by

Acoustic Emission

Oleg V. BASHKOV, Russia

ID90 AE Study of Damage Evolution in Pressure Vessels under Cyclic Loading

Catherine HERVE, France

18

ID93

ID 95

Structural Health Monitoring of Bridges by AE Events to Optimise

Maintenance Scheduling and Improve Bridge Load Management

Sp SANTOSPIRITO, United Kingdom Experience on "AFIAP" Guide to Good Practice for Acoustic Emission

Testing of Pressure Equipment

Catherine HERVE, France ID97 Characteristics of Acoustic Emission Signals in the Rolling Bearing

Zhanwen WU, China

ID98 Study on the Characteristics of Acoustic Emission for Grey Cast Iron

Specimens

Gongtian SHEN, China

ID109 Study of Structural Changes on Uniaxial Tension Plastic Aluminium Alloy

Al-4Cu by Acoustic Emission and Computer Metallography

Tatiana BASHKOVA, Russia

ID110

ID111

Mechanical Characterization of the Damage Process in a Structural

Adhesive Joint by Acoustic Emission

Francisco Javier JUANES, Spain Monitoring and Evaluation of Cyclic Damage in Preinitiation Stages of

Fatigue Process Using Nondestructive Testing Methods

Frantisek VLASIC, Czech Republic ID114 Analysis of Surface Initiated Damage in Thrust Bearings with Acoustic

Emission

Libor NOHAL, Czech Republic

ID117 Measurement of Young's Modulus of Cortical Bone Using Acoustic Emission.

Eva MARTINEZ, Spain

ID120 Possibilities of Acoustic Emission Method for Evaluation of Characteristies

Processes in Wood

Eva SVOBODOVA, Czech Republic

ID121 The Use of Acoustic Emission as Continuous NDT Tool in Petrochemical

Industry

Václav SVOBODA, Czech Republic

ID123

ID129

An Interesting AE Proficiency Test

Janos GEREB, Hungary Failure Mechanisms of Carbon-Fiber-Reinforced Polymer Materials

Characterized by Acoustic Emission Techniques

Christian GROSSE, Germany ID132 Can we grasp the ultrasonic language of living trees?

Lidewei Lucie Vergeynst, Belgium

ID135

ID136

Comparison of Impact-echo Method with Results by Monitoring

Zdenek CHOBOLA, Czech Republic Modes Shape and Harmonic Analysis of Different Structures for Helicopter

Blade

Abdelkader NOUR, Algeria