technical report and equipment list 1,5mio to
DESCRIPTION
Report and EquipmentTRANSCRIPT
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 1/86
TECHNICAL REPORT
FOR
5000 TPD CEMENT PRODUCTION LINE
Specification
Equipment list
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 2/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
1
CONTENTS
CHAPTER 1 GENERAL DESCRIPTION OF THE PLANT
1.1 Design Capacity
1.2 Fuel
1.3 Altitude above sea-level
1.4 Raw materials
1.5 Description of Process
1.6 Power Supply and Distribution
1.7 Process Control System and Instrumentation
CHAPTER 2 TECHNICAL AND ECONOMIC INDICES
CHAPTER 3 PROJECT SCHEDULE
CHAPTER 4 EQUIPMENT LIST
1. List of Mechanical Equipment
2. Laboratory
3. List of Electrical Equipment and Material
4. List of Process Control System
Annex PROCESS FLOW SHEET
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 3/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
2
CHAPTER 1
GENERAL DESCRIPTION OF THE PLANT
1.1 Design Capacity
Cement Production Capacity 5,000t/day (5000 TPD)
Cement Production Capacity 1,500,000t/yearly (1,5 Mio TPA)
1.2 Fuel
The Oil will be as fuel;
1.3 Altitude above sea-level
Less than 600m (Suppositive) 600m
1.4 Raw materials
Raw materials including: Limestone, Clay, and Pyrite etc.
(1) Raw materials Chemical composition: (supposition)
Chemical
Composition
Limestone
(Suppositive)
Clay
(Suppositive)
Pyrite
(Suppositive)
LOSS 39.44 6.10 18.75
SiO2 5.50 66.50 17.00
Al2O3 0.98 17.32 8.15
Fe2O3 0.75 8.50 51.00
CaO 51.00 0.41 1.65
MgO 1.00 0.18 1.25
K2O 0.30 0.00 0.15
Na2O 0.01 0.00 0.08
SO3 0.01 0.00 0.01
Cl 0.009 0.000 0.001
Others 1.00 0.99 1.96
Total 100.00 100.00 100.00
(2) Raw materials proportioning design
Production technique is dry-production process with precalciner. So Clinker design
modules are based upon the following data:
KH = 0.87~
0.90 ;
SM = 2.40~
2.60 ;
IM = 1.40~
1.60 ;
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 4/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
3
According to calculation, to meet the above-mentioned modules, the blending of various
materials shall be as following:
On the dry basis:
Limestone:84.46 Clay:14.99%, :0.55%
On the wet basis:
Limestone: %, Clay: %, Iron ore : %
Chemical composition of raw mix and clinker expected:
Composition Raw Mix (%) Clinker (%)
LOSS 34.33 -----
SiO2 14.71 22.40
Al2O3 3.47 5.28
Fe2O3 2.19 3.33
CaO 43.14 65.70
MgO 0.88 1.34
K2O 0.25 0.39
Na2O 0.01 0.01
SO3 0.01 0.01
Cl 0.01 0.01
Others 1 1.53
Total 100.00 100.00
KH 0.89 0.89
SM 2.60 2.60
IM 1.59 1.59
LSF 92.39
HM 2.12
S/A 4.24 4.24
C3S 56.82
C2S 21.30
C3A 8.35
C4AF 10.13
Na2 O eq* 0.27
LIQUID QANTITY at 1400
SULFUR / ALKALI ( S/G** )
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 5/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
4
E-So3 ( g / 100kg-clinker)
Burnability: Burnability test shall be conducted before starting of technical design.
1.5 Description of plant
1.5.1 Description of process flow(1) Limestone crushing & storage
One-stage crushing is utilized for limestone, which is dumped to feed hopper by automatic
dump truck from quarry, and conveyed to limestone pre-blending stock pile by belt
conveyor after crushed by hammer crusher.
(2) Clay crushing & conveying
Clay will be sent to the discharging hopper in plant directly by truck from the quarry, then
fed to the crusher by a apron feeder. The crushed clay will be sent to pre-proportioning
station via a belt conveyor.
(3) Clay pre-blending
Clay and Silica sand will be sent to pre-blending stockpile via a belt conveyor. Clay and
Silica sand are stacked in the form of a chevron style by a suspended stacker. Pre-
blended material is taken out by a bridge scrapper reclaimer and sent to the raw material
proportioning station via a belt conveyor. The pure clay as corrective and iron ore is stored
in the stockpile too, they are sent to proportioning station via belt.
(4) Limestone pre-blending & conveying
A circular limestone pre-blending stock pile with 90m rail diameter is adopted, the
effective reserve of which is 50,000t. A rotary jib stacker is used for strata stacking, while a
bridge scraper reclaimer is for reclaiming. The reclaimed limestone is sent to a limestone
proportioning bin by belt conveyor.
(5) Raw material proportioning station
There are four bins for limestone, clay, silica sand and iron ore in the raw material
proportioning station. Four weighing feeder are located under four bins for proportioning.
To prevent iron ore from blocking up, pre-feeder is considered under iron ore bin. Four
materials are proportioned through the weighing feeders according to pre-set ratio.
Proportioned materials are sent to the raw mill via a belt conveyor.
(6) Raw material grinding & exhaust gas treatment.
A vertical roller mill is used as the raw mill. The gas from preheater is used as the heat
source for drying raw materials. Stand-by heat source is oil fuel heat generator. Grinded
materials is taken into a cyclone separator and a E.P. by the heat gas flow, collected raw
meal is sent on to the homogenization silo via a air slides. The gas out of the raw mill is
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 6/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
5
dedusted by a EP and the clean air is emitted into the atmosphere. The gas out of the
preheater will enter the conditioning tower directly and be dedusted by a E.P., then the
clean air is emitted into the atmosphere when the vertical roller mill stop running.
(7) Raw meal homogenization silos and kiln feeding system
The raw meal from the raw mill system is transported intoφ22m homo. silos via a bucket
elevator and the top distribution system of raw meal. Aeration systems for blending and
continuous discharging are installed on the bottom of silos. The raw meal from the
blending silos will be transported to the kiln feeding system via a airslide and a bucket
elevator. Before fed into the preheater via a bucket elevator, the raw meal will be weighed.
(8) Burning system
A φ4.8×74m dry process rotary kiln with a 5-stage cyclone preheater and a calciner as
well as a clinker grate cooler will be adopted. The fuel for the burning system will be from
pulverized coal preparation. The cool air is from the cooling fans. The secondary air for the
kiln and the tertiary air for the calciner are from the grate cooler. The access gas from the
grate cooler is dedusted by an E.P. and then emitted to the atmosphere. A water-spray
device for adjusting the gas temperature is installed in the cooler.
(9) Clinker storage & conveying
Φ45m, 50,000tA 1-Φ45m circular silo is applied for clinker storage with effective capacityof 50,000t. The clinker out of this silo is sent to clinker bin at cement proportioning station
by belt conveyor.
(10) Gypsum crushing
The lumpy gypsum delivered into the plant will be placed in the open area. It will be loaded
to feed bin of gypsum crusher by loader. An apron feeder will send the gypsum uniformly
into a 70t/h impact hammer crusher. The crusher is large in reduction ratio and low in
energy consumption. The permissible feed size is less than 600mm and the product size
is no more than 25mm. The crushed gypsum will be sent to storage by the conveyor.
(11) Cement grinding
2 Roller press plus 2 4.212m cement mills in closed circuits with O-Sepa high efficiency
separator will be used, each with the capacity of 110t/h (at fineness of 3,800cm2/g). The
mill will run 22 h/d.
The clinker and gypsum from the silos will be sent to the bins, from which they will be sent
to the cement mill by constant weigh feeders. The cement out of the mill will be sent to the
high efficiency separator by the elevator. The coarse particle will be returned to the mill
and the fine particle carried by air to the dust collector. The fines collected will be the
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 7/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
6
qualified cement, which will enter the cement silo. The dust concentration of air out of dust
collector is no more than 100mg/m3.
(12) Cement storage
6 15m cement silos will be used as the storage, each having the aerating plate, etc. for
homogenization. Two out of 6 will be attached with truck loading telescopes for bulk
loading. The total storage capacity is 42,000t.
(13) Cement packing
Four cement packers, each 150t/h, can pack the daily cement product completely in 12
hours. The packing system is accurate in weighing.
The cement from under the cement silo will be delivered by the air slide to the elevator,
vibrating screen, buffer bin, etc., before being fed into packer. The bagged cement can be
loaded directly or stored in the finished product storage, which can hold 4,900t.
(14) Fuel oil system
The heavy oil will be transported to the plant via oil truck and discharged into the oil pit,
and then pumped into three oil tanks D20×17m. The oil in the oil tanks will be partly
vacuum heated to 60℃ before it can be pumped via recirculation pump into the duplex
high pressure oil pump. The duplex high pressure oil pump will send the oil over the
heating device separately to the metering control system of the preheater burner and the
metering control system of the kiln burner and then to the respective burners.(15) Compressed air station
An air compressor station will be installed, furnished the drying, oil free and water free
compressed air for consumers in the production line.
(16) Laboratory
The whole plant has one central laboratory. The central laboratory is equipped with
complete equipment for physical test and chemical analysis, and instruments, tools and
chemicals as well as agents. It is responsible for chemical analysis and physical test of
the raw materials, fuel, half-finished products and end product.
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 8/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
7
1.5.2 Main Equipment list
Item
No.
Equipment Specification Q'ty Weight
1 Hammer crusher 1 180Limestone crusher Capacity:1500t/h
Motor power :1000Kw×2
2 Clay crusher Impact crusher 1 53
Capacity:380t/h
Motor power :130Kw×2
3 Limestone stacker Suspended arm type
Capacity:1500t/h
1 110
Motor power :110Kw
4 Limestone Reclaimer Bridge type
Capacity:600t/h
1 184
Motor power:180Kw
5 Clay stacker Suspended arm type 1 60
Capacity:390t/h
Motor power :70Kw
6 Clay Reclaimer Bridge type
Capacity:340t/h
1 90
Motor power:140Kw
7 Vertical Roller mill Vertical Roller mill
Capacity:490t/h
1 640
Inlet size<100mm
outlet size<12%, (0.090mm)
Motor power: 3400Kw
8 Raw mill extraction fan Air volume:660000m3/h 1 57.9
Air pressure: 11KPa
9 Air volume: 1 464
E.P. for preheater 660000m3/h
exhausted gas Outlet
dust content:<60mg/m3
10 Raw meal homo. silo Multi-Fluid-SiloΦ22m 1 5
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 9/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
8
11 I. D. fan ( i.e. Preheater Air volume:690000m3/h 1 30.5
high temperature fan ) Air pressure: 8.4KPa
Motor power:2400Kw
13 Preheater & Precalciner Double strings
5-stage preheater with
NDS-precalciner
1 512
14 Kiln & Tertiary air duct Kiln:Φ4.8×74m 1 916
Capacity:5500t/d
Motor power:630Kw
Tertiary air duct:Φ3000mm 1 76
15 Advanced Great cooler Capacity:5000t/d
Max.4500t/d
Great area:102m2
Motor power:250Kw
16 Oil tank 2017m 3
Capacity:11000t
17 Cement mill Roller press
Ball mill 4.213m
2
2
2130
2x220
Capacity:260t/h
18 Loader for truck SZ-2 2
Capacity:60~350t/h
19 Cement packer Eight-spout rotary packer 4 46
Capacity:4100~150t/h
1.5.3 List of storage facility of whole plant
No. Name Specification Capacity(t) Duration(d)
1 Limestone Preblending stock-pile 52000 7
2 Raw meal Silo 1-Φ22×50m 20000 3
3 Clinker 1-Φ45m 49000 11
4 Gypsum Open stockpile 4060m 8000 40
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 10/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
9
Silo 1224m 3000 17
5 Cement silo 6-1535 48000 12.1
6 Finished product silo 4580m 4500 1.24
1.6 Power Supply and Distribution
1.6.1 The scope of our supply
The scope of our quotation includes the electric equipment and material for the
technological process area of the plant, including seven electric rooms and the local electric
equipment and material used for the technological process. But the main power station
used for stepping down voltage from supplied voltage to 6.3KV is not included in our
quotation.
1.6.2 Power supply and distribution system
(1) Grade of electric voltage
supplied voltage by user ? KV
high-tension distribution voltage 6.3KV
high-tension motor voltage 6.0KV
low-tension distribution voltage 0.4KV
low-tension motor voltage 0.38KV
DC motor voltage 220V,440V or by DC panel
lighting voltage 380/220V
6KV DC 220V
operational voltage in 6KV distribution system DC 220V
(2) Installed and calculating capacity
Installed capacity for the plant 29500KW
including capacity in limestone quarry 1600KW
including high tension capacity 19790KW
capacity for the plant 20650KW
natural power factor 0.7
power factor after compensation at the 6.3KV
incoming end of the high-tension distribution station >0.9
power consumption 100KwH/T cement
annual power consumption 13000×104KwH
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 11/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
10
(3) Power supply
The main power station and its incoming power line are designed and built by client, the
main power station should supply six 6.3 KV power line to the main technological process
area, the use of this six power supply and their power capacity required are showed in the
attached diagram. And one line 6.3KV power supply for the limestone quarry and limestone
crushing area are also needed , this power supplied is connected to the main station or to
the electrical net nearby are decided by client according to the distance between limestone
quarry and the main technological process area.
(4) Distribution system
In the plant, six electrical rooms will be erected. And four of them (limestone crushing
electric room, Raw grinding electrical room, Cooler electrical room and cement grinding
electrical room) have 6KV HV distribution equipment which distribute 6.3KV power to the
HV motors 6.3/0.4KV power transformers and 6.3KV rectifier transformers within the
related area. Each electrical room have one or two 6/0.4KV power transformer and a set of
LV distribution equipment (including MDB & MCC ), supplying 0.4/0.23KV LV power for all
the LV load in the related area .
(5) Electric rooms located in plant
Six electrical rooms will be erected in the main technological process area and oneelectrical room will be erected in the limestone quarry and crushing area.
Besides in Limestone crushing electric room, In Raw grinding electrical room, Cooler
electrical room and Cement grinding electrical room, 6KV HV distribution equipment will be
installed, and 6KV manual capacitance compensator will be equipped at the 6KV bus of HV
distribution system to adjust the power factor at the incoming end to be more then 0.9. The
6KV transformers and HV Motors connected to 6KV distribution equipment in the
mentioned electric room above are showed in the attached diagram.
In each electrical room, one or two 6/0.4KV power transformer, LV draw-out type MDB and
MCC,DCS field station (or PLCs) and its I/O moduale cabinet are installed, used to
distribute electricity to and control the technological process in the related aera.
A set of 0.4KV automatic capacitance compensator is equipped at 0.4KV bus of each
transformer, ensuring the power factor there is more than 0.9.
If necessary, some motor starter, speed regulator, special control cabinet are also installed
here.
In each electrical room with HV distribution equipment,The 220V DC nickel-cadmium cell
cabinets will be installed to supply operating power for the HV distribution equipment.
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 12/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
11
380/220V 50Hz 800KW
In Cooler electrical room,a set of 380/220V 50Hz 800KW diesel-electric generator will be
installed to supply emergency power.
The related area of each electric room are divided as follow:
Limestone crush electrical room for:
quarry site, limestone crushing, storage and conveying.
Preblending electrical room for:
limestone conveying,oil storage and conveying,clay and shale crushing and
conveying,preblending and storage,the top of the raw materials proportioning station.
Raw grinding electrical room for:
he bottom of the raw materials proportioning station
raw materials grinding
raw materials conveying to the top of homogenizing silo
exhaust gas treatment.
Preheater electrical room for:
raw meal homogenizing silo
kiln feeding, cyclone preheater
Cooler electrical room for:
kiln and coolerclinker conveying to the top of clinker silo
oil burning system
Cement packing electrical room
1.6.3 Electric control
The main process line from the discharging system of preblending to the top of the cement
silo are controlled by DCS ,operating and monitoring of the equipment within this area are
on the operating station installed in CCR. And three local control station with PLC will be
installed, one in preblending electrical room for the area of limestone conveying, clay
crushing and conveying, preblending and storage, and the other in limestone crush
electrical room for the area of limestone crushing and conveying. Other unimportant
auxiliary workshops are controlled in the workshop or by motor in a normal relay-
contractor control mode. The details about The use of DCS are explained in the part of
automation.
No matter what control mode is used, each motor will have a local start/stop box installed
by the motor for maintenance and safety.
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 13/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
12
The Selection of Starter and Speed-Regulating Device
Liquited starter will be used for HV wound rotor induction motors. Frequency controlled
rheostat starter will be used for LV wound rotor induction motors. Squirrel-cage motors
start directly.
For the speed-regulating motors, thyister rectifier device will be used for D.C. motor,
frequency converter will be used for A.C. motor, and liquid coupler may be used according
to technological process .
1.6.5 Installation of Cables
In the outdoor area of the plant ,cable tray are used mainly, and direct burying of cable
into earth is an auxiliary method.
For indoor installation, cable tray, cable trench or protective steal tube may be used
according to the site situation.
1.6.6 Others
380/220V lighting power is supplied by the transformer, Lighting power distribution box is
used in each department to distribute and control the lighting system. The high efficiency
lamp is used in the workshops, and fluorescent tube will be used in control room, electric
room, offices etc. Safe lighting will be used in special place.
To the buildings and structures above 12m, the lightning protected system must be
installed.
The earthing system of the whole plant is a net made of steel with its earthing resistant
less than 4. And the protective earthing system, working earthing system and lightning
protected earthing system are connected to the same earthing network.
The workshop for maintenance of electric equipment is on middle-scale.
1.7 Process Control System and Instrumentation
1.7.1Technical approach
(1) Control system organization
The structure of the control system is derived from the cement manufacturing process with
its buffered sub-processes which can largely be operated as independent units.
Accordingly the process control system is divided into autonomous control areas
Furthermore the control system is hierarchically organized into the levels:
I:Level 1: field control level.
II: Level II: local process control station. III:Level III: operator work stations.
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 14/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
13
The drawing AS-00 shows a general view of this structure on the cement process control
layout.
(2) Highlights of the control system
The objectives for implementation of the control system are:
Protection of personnel, machinery and environment.
Efficient plant operation.
Maximum productivity of quality products.
Optimum use of raw materials and energy savings.
(3) Uniform philosophies
An operator philosophy dedicated to the industry combined with comprehensive
background functions for alarm, event and data logging are the perfect function for a clear
and fast operator interface. Each operator station can be equipped with video displays
showing motor status, loop control, instrumentation valves and production data.
The process equipment is operated and referred to in tag numbers and engineering units
operation by picture-dedicated soft keys with function like start, stop or parameter settings is
used. Most operation commands are give directly on the graphical process displays, or onplant-dedicated overview displays.
(4) System structure
A clear separation in the hierarchical levels as well as in the process sections enables
independent operation of each process department. In case of shutdown of one department the
other plant sections can remain in full operation.
The system and panel construction are thoroughly modular and the same hardware
modules are often used with different software to suit different purposes and to reduce the
hardware variants, this consistent construction is carried through down to the component level.
The motor sequences, interlocking, loop control, instrument valve supervision and process
calculation are handled by the same process control station. Hereby interconnections by wiring
between different process stations are not necessary and the result is a clearly structured and
transparent software function; providing easy trouble shooting.
All types of the above software function are programmed with graphic function blocks. The
standard block elements comprise a long range of elements for motor and loop control but
include also the possibility to create industrial or customer specific elements. With this kind of
language even complex control tasks can be programmed as one function and thereby
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 15/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
14
contribute to the transparency of the software.
The modularity in software and hardware together with the on line facilities for modifications
allow almost unlimited extensions of the installation, without interruption of production.
(5) Availability and maintenance
The self diagnostic functions and the modular construction in hardware give superior
guidance for the maintenance personnel.
On line programming and database modifications make it possible to modify the software
functions during operation, also editing or modification of graphical and other displays can
be done on line.
(6) Equipment and highlights
a: The system provides a complete set of control function in the control station, therefore
only one type of process station is required.
b: Closed loop control up to the highest standard of an instrumentation system combined with
sequence and interlocking functions on one level only found in the best PLC system.
c: All these functions are combined in one single graphical programming language,
structured and process oriented in order to be programmed by process engineers and with
automatic documentation facilities.
d: The operator station gives the best possible facilities for customer-designed mimics.
e: The response time from the process to the operator screen is seconds with redundantoperator stations the need for panel instruments and recorders is eliminated.
f:
Further the operator station automatically generates displays of all measuring points and
controlled objects, motors as well as loops.
g:
communicating
Gateways from the Standard Net provide the possibility of controlling or communicating
with other control system.
h:
Links are also available for communication with mini-computers installed for process
optimisation or management information system.
i:
Most parts of the control system can be redundant in order to create fail-safe system.
j: All system errors are automatically reported on the operator screen, including all units
down to I/O broads and channels.
k: Hardware modules and software packages can be replaced during operation.
l: Uniform structure in hardware, application programmed can automatic error detection,
provides magnificent facilities for maintenance.
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 16/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
15
1.7.2 QCS quality control system
QCS is an advanced product for the closed-loop optimisation of the raw mix in order to
produce the required kiln feed with constant chemical composition. It is most important for
a modern cement plant to produce clinker with high quality.
A high performance raw mix composition control system has the following advantages:
The improved clinker quality is resulted by the optimum preperties of the raw mixture.
Homogeneous raw mix prevent extensive or unstable coating formation in kiln or
preheater.
Homogeneous raw mix prolong the refractory life and reduces the heat consumption by
ensuring stable coating formation.
Increased clinker yearly production through shorter kiln downtime.
The mix application runs on its own dedicated computer and linked to the process via a
serial interfaces to the existing control system and to the X-ray analyser system.
1.7.3 Scanex system
The system is designed for continuous measurement and instantaneous display of the kiln
shell external temperature on a display located in a Central Control Room. Temperature
measurement is made using infrared techniques. The system allows either one or two
sensors to be simultaneously display on a single monitor, each controlled independentlyfrom single keyboard and micro computer. All screen displays can be directly output to an
ink jet colour printer. Maximum, minimum and mean temperatures for each point scanned
on the kiln can be recorded continuously to provide a file that win reflect the thickest and
thinnest coating at each point and show variation in coating/refractory thickness. So that
can provides a safeguard in the event of excessive shell heating or cooling, particularly
during kiln light up/shut down.
1.7.4 Instrumentation
General characteristics
Instrumentation signals: 4-20mA
Digital signals Potential free contacts
Power supply voltage:
224VDC
2-wire system, 24VDC from analogue input board.
4- wire 220VAC 50MZ
4-wire system, 220VAC 50MZ from Auxiliary Control Panel.
IP43, IP54
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 17/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
16
Protection class of transmitter: IP43 in control rooms. IP54 for field mounting.
Standards: IEC, VEMA, DIN, ISO etc.
To be supplied by client:
Flanges which are direct in touch with process (mechanical interface).
Piping for pressure transmitters.
Bolts and nuts for mounting.
All the cables.(except communication network for DCS).
Platforms and mechanical supports
General remarks
Alarm and event handling, closed loop control, trend logging and recording is
integrated in DCS control system.
Transmitters and instrumentation system are connected to local control station
via I/O-boards.
(1) Technical specifications
TV system for kiln and cooler supervision
This system is designed in order to supervise hot areas such as burning zones and cooler
grates. The camera is well protected by means of water cooling and air purging. In case of
water, air or power failure the camera will be retracted automatically.
(2) Gas analyzer system Kiln inlet
Gas to be measured: CO: 0-1.5%; NOx: 0-1500ppm; O2: 0-10/21%
Type of probe 60:
Max. gas temperature: 1200C
Gas sampling: signal gas probe
Exit of preheater
Gas to be measured: CO: 0-1.5%; O2: 0-10/21%.
Type of probe 2:
Max. gas temperature: 500C
Type of gas sampling: twin gas probe.
(3) Level measurement
Capacitive level switches
Measuring principle: capacitive
Type of probe: rope
Medium to be measured: clinker, cement, limestone, etc.
Process connection: threading
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 18/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
17
Mounting: threading, flange.
Output: potential free contact.
Accessories: some with transmitters.
Capacitive level (continuos)
Measuring principle: capacitive
Type of probe: rope, L=40m
Medium to be measured: clinker, cement, limestone
Process connection: threading
Process connection: threading, flange
Output: 4-20mA.
Accessories: transmitter.
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 19/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
18
CHAPTER 2TECHNICAL & ECONOMIC INDICES
2.1 Production Capacity
Clinker: 5,000 t/daily
Cement: 1,500,000 t/yearly
2.2 Heat comsumption
750 Kcal/Kg·clinker with oil)
2.3 Power consumption
<96 Kwh/t·Cement2.4 Dust emission (the outlet of E.P.)
Less than 50mg/Nm3
2.5 Daily water consumption:
~
2800 m3 /d
2.6 Plant occupancy:
~
20.0 hectare
2.7 Production Line staff:
120 persons
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 20/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
19
CHAPTER 3PROJECT SCHEDULE
Has to be agreed by separate contract annex!
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 21/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
20
CHAPTER 4EQUIPMENT LIST
1. LIST OF MECHANICAL EQUIPMENT
1.1 PROCESS EQUIPMENTS
1.2 LIST OF WATER EQUIPMENTS
2. LABORATORY
3. LIST OF ELECTRICAL EQUIPMENT AND MATERIAL
4. LIST OF PROCESS CONTROL SYSTEM
Notice:
In the remarks of equipment list:
A: Means the equipment or parts manufactured in developed countries.
B: Means the equipment or parts manufactured in China and
themanufacturing documentation from developed countries.
C: Means the equipment or parts manufactured in China.
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 22/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
21
1. LIST OF MECHANICAL EQUIPMENT
1.1 PROCESS EQUIPMENTS
1.1.1 LIMESTONE CRUSHING AND CONNEYING
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
1.01 Apron feeder 1 90 C
Capacity: 1400 t/h
1.01M Motor:90kw
1.02 Hammer crusher 1 180 C
Capacity: 1500 t/h
1.02M Motor: 900kw×2
Voltage:6000v1.03 Belt conveyor 1 12.0 C
Capacity:1500 t/h
1.03M Motor:38 kw
1.04 Belt conveyor 1 18.0 C
Capacity:1500 t/h
1.04M Motor:120 kw
1.05 Electrical weight 1 0.9 C
Capacity:0~1500 t/h
1.06 Bag filter 1 12.0 C
Capacity:38800 m3/h
1.06M Motor:5.5/1.5kw
1.07 Fan 1 3.0 C
Capacity:38000 m3/h
Pressure:2.92KPa
1.07M Motor:37KW
1.08 Electric butterfly valve 1 0.6 C
1.08M Actuator
Power voltage: 220v 50Hz
Crane, motorized dual beam, hooked 1 31 C
Capacity:30t
Span:13.5m
1.09M Motor:81kw
1.10 Motorized hoist 1 0.6 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 23/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
22
Capacity: 5t
1.10M Motor:9.1kw
1.11 Non-standard parts ~10 C
1.12 Foundation bolt of equipment 1set ~1.5 C
1.1.2 CLAY CRUSHING AND CONVEYING
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
2.01 Apron feeder 1 32 C
Capacity: 450 t/h
2.01M Motor:30kw
2.02 Crusher for clay 1 153 A
Capacity:390t/h
2.02M Motor:220kw
Voltage:6000V
2.03 Belt conveyor 1 3.9 C
Capacity:450 t/h
2.03M Motor:9.5 kw
2.04 Bag filter 1 3.4 CCapacity: 8930m3/h
2.04M Motor:1.1KW
2.05 Fan 1 0.2 C
Capacity:9880 m3/h
Pressure:3.13KPa
2.05M Motor:15KW
2.06 Electric butterfly valve 1 0.35 C
2.06M Actuator
Power voltage: 220v 50Hz
Crane, motorized dual beam,hooked 1 20 C
Capacity:20T
Span:10.5m
2.07M Motor:71kw
2.08 Motorized hoist 1 0.6 C
Capacity: 5t
2.08M Motor:9.1kw
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 24/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
23
2.09 Non standard parts ~8 C
2.10 Foundation bolt of equipment 1set ~1.0 C
1.1.3 CLAY PREBLENDING STOCKPILE
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
3.01 Two-way valve 1 0.75 C
Actuator Voltage:220V
3.02 Rod gates 3 2.3 C
3.03 Weighing feeder 1 3.5 C
Capacity:400 t/h
3.03M Motor:0.95 kw
3.04 Weighing feeder 1 3.0 C
Capacity:400 t/h
3.04M Motor:0.75 kw
3.05 Bag filter 1 2.4 C
Capacity:6900m3/h
3.05M Motor:2.2KW
3.06 Fan 1 0.12 CCapacity:7081m3/h
Pressure:2.428KPa
3.06M Motor:7.5KW
3.07 Belt conveyor 1 25 C
Capacity:0~400t/h
3.07M Motor:45KW
3.08 Stacker 1 60 A and B
Capacity:350t/h
3.08 Motor:60KW
3.09 Reclaimer 1 95 A and B
Capacity:360t/h
3.09 Motor:140KW
3.10 Belt conveyor 1 25 C
Capacity:390t/h
3.10M Motor:40KW
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 25/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
24
3.11 Belt conveyor 1 9 C
Capacity:390t/h
3.11 Motor:15KW
3.12 Fan gate 1 0.8 C
3.13 Non standard parts ~6.0 C
1.1.4 LIMESTONE PREBLENDING STOCKPILE
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
4.01 Belt conveyor 1 ~12 C
DT II trough type
B1000x~90m
Conveying material: l imestone
Conveying capacity:~1200t/h
Grain size:070 mm
Bulk density:1.6 t/m3
Belt speed:2.0 m/s
Inclination: 14~0~-16
4.01M Electric pulley 1Power :75 kW
4.01a Rain cover 50m
B1000
4.02 Homogenizing stacker/reclaimer 1 ~330 C
For round stock
Material:limestone
Grain size:70 mm
Bulk density: 1.45 t/m3
Repose angle:38o
Rail diameter :90000 mm
Rail type:Qu80
Blending ratio:10:1
Total reserve:52000t
Effective reserve:47000t
Voltage:380V 50Hz
Contrl voltage:220V
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 26/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
25
Control mode:PC control,manual
Total power :~235 kW
4.02a Stacker 1
Stacking capacity: max.:1500 t/h
Stacking method: continous
combination
Stacking layers:>300
Stacking radius: 23000mm
Gyrating speed:0.11744 r/min
Stacking belt width: 1000mm
Stacking belt speed: 2.5m/s
4.02b Reclaimer 1
Capacity:540t/h
Reclaiming method: Entire section reclaiming
Scraper width:1700mm
Scraper interval:630mm
Scraper chain speed: 0.47m/s
End beam wandering speed: 0.004~0.04 m/min
End beam switching speed: 3.75m/minHarrow drive:Hydraulic drive
Harrow inclination adjusting range: 34~45
End beam wheel distance:6500mm
4.03 Belt conveyor 1 ~9 C
DTⅡ trough
B800x~73mm
Material:limestone
Bulk density:1.45t/m3
capacity:500 t/h
Belt speed:2.0 m/s
Inclination: 0~14
4.03P Reducer (with back stop)
4.03M Motor
Power :37kW
4.03a Rain cover 19m
B800
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 27/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
26
4.04 Belt conveyor 1 ~21 C
DTⅡ trough
B800x~180mm
Material:limestone
Bulk density:1.45t/m3
Capacity:500 t/h
Belt speed:2.0 m/s
Inclination: 0~14
4.04P Reducer (w. back stop) 1
4.04M Motor 1
Power :110kW
4.04a Rain cover 175m
B800
4.05~4.06 Bag filter 2 2x1.85 C
HMC-64
Air volume:3456m3/h
Total filtering area:48 m2
Filtering speed:1.2m/min
Total bag number :64Inlet dust loading:≤200 g/Nm3
Outlet dust loading:≤50 mg/Nm3
Cleaning compressed air
consumption:0.2 Nm3/min
Jetting pressure: 0.5-0.7MPa
Pressure drop:≤1200Pa
Number of impulse valves: 8
4.05M Fan motor 2
~4.06M Fan capacity:4300 m3/h
Power :3.0 kW
4.07 Single layer rod gate 1 0.892 C
Size: LB-I 800x800
4.08 Compressed air pipe and fittings ~0.4t
Nonstandard parts ~4t
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 28/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
27
1.1.5 MATERIALS PROPORTIONING STATION
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
5.01 Two-way valve 2 1.4 C
5.01M Actuator Voltage:220V
5.02 Rod gates 3 3.0 C
5.03 Weighing feeder 1 3.2 A and B
Capacity:10t/h
5.03M Motor:DC, 0.74kw C
5.04 Weighing feeder 1 7.0 A and B
Capacity:120t/h
5.04M Motor:DC, 0.74kw
5.05 Weighing feeder 1 4.4 A and B
Capacity:350t/h
5.05M Motor:DC, 0.74kw
5.06 Belt conveyor 1 14.0 C
Capacity: 400 t/h
5.06M Motor:44kw5.07 Bag filter 2 4.8 C
Capacity:6900 m3/h
5.07M Motor:2.2KW
5.08 Fan 1 0.2 C
Capacity:7900m3/h
Pressure:3.24KPa
5.08M Motor:14KW
5.09 Electric butterfly valve 2 0.4 C
5.09M Actuator Voltage:220V
5.10 Man holes 4 0.2 C
5.11 Hole covers 4 0.04 C
5.12 Non standard parts ~4.0 C
5.13 Foundation bolt of equipment 1set ~1.0 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 29/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
28
1.1.6 RAW MATERIAL GRINDING & EXHAUST GAS TREATMENT
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
6.01 Magnetic separator 1 2.4 A
Motor:3KW
6.02 Metal detector 1 0.19 A
6.03 Bin 1 8.7 C
6.04 Roller feeder 1 8.6 C
Capacity:490t/h
6.04M Motor:12.4KW
6.04 Vertical Roller mill 1 640 A and B
Capacity: 420t/h
Main motor:3400KW
Voltage:6000V
Aux. motor:4.4kw
Main reducer
Tension device Power:37KW
Aux. reducer Power:2×37KW
Separator Power:130KWWater pump Power:4.4KW
6.06 Cyclone separator 2 68 C
Capacity:440t/h
6.07 Discharging valve 2 2.6 C
Capacity: 260t/h
6.07M Motor:2×11KW
6.08 Air slide 1 2.6 C
Capacity: 440t/h
6.09 Fan 1 0.2 C
Capacity: 3488m3/h
Air pressure: 4.08KPa
6.09M Motor: 11kw
6.10 Air slide 1 3.3 C
Capacity:440t/h
6.11 Fan 2 0.3 C
Capacity:1932m3/h
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 30/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
29
Pressure:4.77KPa
6.11M Motor:2×7.4KW
6.12 Raw mill Fan 1 47.9 A and B
Capacity:660000m3/h
Pressure:11KPa
6.12M Motor:2400kw
6.13 E.P. 1 464 C
Capacity:620000m3/h
6.13M Motor:44.7KW
6.14 Fan 1 34 C
Capacity:720000m3/h
Pressure:1.6KPa
6.14M Motor:400kw
6.15 Chain conveyor 1 3.9 C
Capacity:100t/h
6.15M Motor:11KW
6.16 Condition tower 1 106 A and B
Capacity:320000m3/h
Inlet temperature:330℃ Oulet temperature:140℃
6.16M Motor:22/4.4KW
6.17 Screw conveyor 1 3.2 C
Capacity:40t/h
6.17M Motor:11KW
6.18 I.D.fan 1 30.4 A
Capacity: 690000m3/h
Pressure: 8.4KPa
6.18M Motor: 2400KW
6.19 Electric venetian blind valve 4 ~24 C
6.19M Motor:4×3.7KW
6.20 Electric venetian blind valve 3 ~16.4 C
6.20M Motor:3×1.4KW
6.21 Electric venetian valve 1 ~1.9 C
6.21M Motor:0.4KW
6.22 Outlet valve of heat generator 1 3.0 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 31/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
30
6.22M Motor:3KW
6.23 Bag filter 2 2.8 C
Capacity:4080m3/h
6.23M Motor:4.0/0.44/0.44KW
6.24 Sampler 1 0.14 A
6.24M Motor:11KW
6.25 Heat generator 1 A
6.26 Expansion joint 21 40.4 C
6.27 Foundation bolt of equipment 1set ~8 C
6.28 Insulantion ~700m3 C
6.29 Non standard parts ~400 C
1.1.7 RAW MEAL HOMOGENIZING SILO
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
7.01 Bucket elevator 1 44.4 A
Capacity: 480t/h
7.01M Motor: 132kw7.02 Air slide 1 4.0 C
Capacity:480t/h
7.03 Fan 1 0.2 C
Capacity:3488m3/h
Pressure:4.08KPa
7.03M Motor :11KW
7.04 Raw meal distributor 2 4.1 C
Capacity:250m3/h
7.05 Rotary blower 2 1.8 C
Capacity:17.0m3/min
Pressure:0.02MPa
7.05M Motor:11KW
7.06 Silo bottom discharging 4 3.0 C
Incl. flap valve, flowrate valve, valve
solenoid valve, pneumatic rotary valve, etc.
Capcity:40~320m3/h
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 32/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
31
7.07 Rotary blower 4 3.2 C
Capacity:14.0m3/min
Pressure:0.08MPa
7.07M Motor:37KW
7.08 Rotary blower 3 1.8 C
Capacity:7.7m3/min
Pressure:0.08MPa
7.08M Motor:32KW
7.09 Air slide 1 4.4 C
Capacity:320t/h
7.10 Fan 2 0.14 C
Capacity:2244m3/h
Pressure:4.74KPa
7.10M Motor:2x7.4KW
7.11 Bag filter 2 6.8 C
Capacity:8930m3/h
7.11 Motor:2.3KW
7.12 Fan 2 0.4 C
Capacity:9928m3/hPressure:3.07KPa
7.12M Motor:2x14KW
7.13 Bag filter 1 2.4 C
Capacity:6900m3/h
7.13M Motor:2.3KW
7.14 Fan 1 0.2 C
Capacity:7784m3/h
Pressure:2.32KPa
7.14M Motor :7.4KW
7.15 Silo bottom aeration system 2 33.8 C
Incl. aerating chute, pipe, solenoid valve, etc.
7.16 Weighing bin aeration system 2 6.0 C
Incl.safety valve,butterfly valve
electro-magnetic,pneumatic valve
pressure meter,etc.
7.17 Pressure balnace valve 2 0.4 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 33/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
32
7.18 Man holes 4 0.2 C
7.19 Man holes on side 6 0.9 C
7.20 Pressure balance 2 0.4 C
7.21 Hole cover 2 3.0 C
7.22 Air pressure piping 1set ~1.0 C
7.23 Nonstandard 10.0 C
1.1.8 KILN FEEDING
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
8.01 Bucket elevator 1 11.2 A and B
Capacity:440t/h
8.01M Motor:74KW
8.02 Air slide 1 1.4 C
Capacity:420t/h
8.03 Fan 1 0.14 C
Capacity:1170m3/h
Pressure:4.4KPa
8.03M Motor:4KW8.04 Weighing bin 1 4.8 A and B
include load cells
8.05 Bin bottom discharging device 2 0.4 A
Capacity:40~340m3/h
8.06 Solid flowmeter 1 0.22 A
Capacity:30~340t/h
8.07 Totary blower 2 2.4 A
Capacity:7.63m3/min
Pressure:0.08MPa
8.07M Motor:18.4KW
8.08 Air slide 1 3.7 B
Capacity:360t/h
8.09 Fan 1 0.14 C
Capacity:2476m3/h
Pressure:4639Pa
8.09M Motor:7.4KW
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 34/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
33
8.10 Sampler 1 0.2 C
8.10M Motor:2.2KW
8.11 Bucket elevator 1 8 A and B
Capacity:380t/h
8.11M Motor:74KW
8.12 Air slide 1 3.0 B
Capacity:420t/h
8.13 Fan 1 0.14 C
Capacity:2476m3/h
Pressure:4.64KPa
8.13M Motor:7.4KW
8.14 Bag filter 2 4.8 C
Capacity: 6900m3/h
8.14M Motor:1.1KW
8.15 Fan 2 0.4 C
Capacity:7784m3/h
Pressure:2.32KPa
8.15M Motor:7.4KW
8.16 Electric butterfly valve 2 0.4 C8.16M Actuator Voltage:220V
8.17 Air compressed pipe 1set 1.0 C
8.18 Non-standard parts ~4.0 C
8.19 Foundation bolt of equipment 1set ~1.0 C
1.1.9 PREHEATER AND PRECALCINER
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
9.01 Rotary valve 2 3.0 C
Capacity:160t/h
9.02 Preheater and Precalciner 1 412 C
include:preheater,precalciner,
gas ducts,discharge pipes,
ignition device, shut-off valve,
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 35/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
34
high temp. adjusting valve,
gas releasing valve etc.
9.03 Air lance system 1 20 C
include:air tank、air distributing
valve、compressed air pipes etc.
9.04 Damper 1 4.0 C
9.04M Motor:4KW
9.05 Air blaster 1set 2.4 C
9.06 Lift 1 C
9.07 Preheater steel tower 1 980 C
9.08 Refractory 1 1400 C
9.09 Non-standard parts ~1.0 C
1.1.10 KILN AND TERTIARY AIR DUCT
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
10.01 Kilnφ4.8×74m 1 707.4 A and B
Capacity:5500t/d, Max. 5900 t/d10.01M1 Motor: 630kw
10.01M2 Aux. motor:37kw
10.02 Tertiary air duct 1 107 C
φ3000mm
10.03 Regulate gate 1 4.82 C
10.03M Motor: 3kw
10.04 Electric dischargering gate 1 2.0 A and B
10.04M Motor:2.2kw
10.05 Cooling fan 8 0.4 C
10.05M Motor:0.8kw
10.06 Oil pipes、air pipes and fixing device 1.0 C
10.07 Refractory for kiln and tertiary air duct 640 C
10.08 Nonstandard parts 1.0 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 36/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
35
1.1.11 CLINKER COOLING
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
11.01 Clinker grate cooler 1 241.1 A and B
Capacity:5500t/d, Max. 5900 t/d
Area: 102 m2
Inlet temp. :1340C
Outlet temp.: <64C+amb. temp.
11.01M1 Motor for№.1 grate Power :44kw
11.01M2 Motor for№.2 grate Power :44kw
11.01M3 Motor for№.3 grate Power :44kw
11.01M4 Clinker crusher Power :44kw
11.01M5 Others Motors Power :30.74kw
11.02 Dischargering gate 9 4.0 A
11.02M Motor:0.24kw
11.03 Fan for№.1 chamber 122(include11.03~11.11)
(include control gate)
Air rate:344m3/min A
Air pressure:10.4KPa11.03M Motor:110kw
11.04 Fan for№.1 chamber 1 A
(include control gate)
Air rate:360m3/min
Air pressure:8.4KPa
11.04M Motor:90kw
11.05 1#3#3# Fan for№.1 chamber 1 A
(include control gate)
Air rate:360m3/min
Air pressure:8.4KPa
11.05M Motor:90kw
11.06 Fan for№.2 chamber 1 A
(include control gate)
Air rate:1004m3/min
Air pressure:6.4KPa
11.06M Motor:180kw
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 37/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
36
11.07 Fan for№.3 chamber 1 A
(include control gate)
Air rate:1338m3/min
Air pressure:4.4KPa
11.07M Motor:224kw
11.08 4#Fan for№.4 chamber 1 A
(include control gate)
Air rate:484m3/min
Air pressure:4.4KPa
11.08M Motor:74kw
11.09 Fan for№.4 chamber 1 A
(include control gate)
Air rate:742m3/min
Air pressure:4.4KPa
11.09M Motor:90kw
11.10 6# Fan for№.6 chamber 1 A
(include control gate)
Air rate:1477m3/min
Air pressure:4.4KPa11.10M Motor:180kw
11.11 7#Fan for№.7 chamber 1 A
(include control gate)
Air rate:483m3/min
Air pressure:4.0KPa
11.11M Motor:74kw
11.12 8#Fan for№.8 chamber 1 A
(include control gate)
Air rate:613m3/min
Air pressure:3.4KPa
11.12M Motor:74kw
11.13 9#Fan for№.9 chamber 1 A
(include control gate)
Air rate:1184m3/min
Air pressure:3.0KPa
11.13M Motor:110kw
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 38/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
37
11.14 E.P. 1 447.48 B
Capacity:487700m3/h
Inlet dust concentration:<20g/Nm3
Outlet dust concentration:<70mg/Nm3
11.14M1 Motor (include electric heater) 22
Power:0.37kw
11.14M2 Motor (include electric heater) 48
Power:0.4kw
11.14M3 Motor 4
Power:7.4kw
11.14M4 Motor 4
Power:2.2kw
11.15 Screw conveyor 1 4.0
Capacity:20t/h
11.15 Motor:11kw
11.16 Fan 1 24 C
Air rate:473000m3/h
Air pressure:2.08KPa
11.16M Motor:630kw11.17 Electric venetian blind valve 1 1.4 A and B
11.17M Actuator Power:0.1kw
11.18 Electric venetian blind valve 1 0.4 A and B
11.18M Actuator Power:0.1kw
11.19 Fan 1 0.2 C
Air rate:4200m3/h
Air pressure:1.96KPa
11.19M Motor:4.4kw
11.20 Burning device 1 20.44 A
Capacity:18t/h(Max)
include:electric carriage、control gate etc.
11.20M Motor:2.2kw
11.21 Fan 1 1.0 C
Air rate:80m3/min
Air pressure:14KPa
11.21M Motor:37kw
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 39/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
38
11.22 Fan 1 0.2 C
Air rate:4790m3/h
Air pressure:2.67KPa
11.22M Motor:7.4kw
11.23 Fuel oil system 1 3.3 A
include :oil tank、oil pump、
control gate and oil burning
control device
11.24 Fan 1 0.2 C
Air rate:220m3/min
Air pressure:3.4KPa
11.24M Motor:30kw
11.25 Motorized hoist 1 0.7 C
Capacity:4t
11.25M Motor:7.4/0.8kw
11.26 Motorized hoist 1 0.7 C
Capacity:4t
11.26M Motor:7.4/0.8kw
11.27 Expansion joint 6 8.4 C11.28 Refractories 260 C
11.29 Insulation 300m3 C
11.30 Nonstandard parts 100 C
11.31 Equipment basis bolt 1set 4 C
1.1.12 CLINKER STORAGE AND CONVEYING
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
12.01 Rod gate LB-I 19 19x0.790 C
Size: 700x700mm
12.02~ Electric-hydra gate 19 C
12.20 Type: TDSZ-70
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 40/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
39
Size: 700x700mm
12.02~ Electric-hydra actuator 19
12.20M DYTZ1740-300/110-P
Power: 2.2kW
12.21 Belt conveyor 2 ~6 C
12.23 DT II trough type
B800x~49000mm
Material:clinker
Conveying Capacity:200t/h
Belt speed:1.24m/s
Inclination: 0~6
12.21M Electric pulley 2
12.23M Power :14kW
12.22 Belt conveyor 1 ~6 C
DT II trough type
B800x~42000mm
Material:clinker
Conveying Capacity:200t/h
Belt speed:1.24m/sInclination: 0~6
12.22M Electric pulley 1
Power :14kW
12.24 Belt conveyor 1 ~19 C
DT II trough type
B800x~160000mm
Material:clinker
Conveying Capacity:400t/h
Inclination: 0~14
Belt speed:1.6m/s
12.24M Motor 1
Power :74kW
12.24P Reducer 1
12.24a Rain cover ~110
B800
12.24 Electric-hydra flat gate 1 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 41/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
40
DPZ-70
Material:clinker
12.24M Electric-hydra actuator 1
DYTZ1400-740
Power :1.4kW
12.26 Plenum impulse bag filter 1 8.71 C
LCPM96-4
Total filtering area: 372 m2
Air volume:26800 m3/h
Filtering speed: 1.2m/min
Inlet dust loading:
< 1300g/Nm3
Outlet dust loading:
< 40mg/Nm3
Pressure loss:1200~1600Pa
Compressed Air pressure for dust
cleaning:(4~7)x104 Pa
Air consumption: 1.4 Nm3/min
12.26a Impulse valve 4(w. solenoid valve)
Size: 2.4 ”
12.26b Lifting valve(with cylinder ) 4
Diameter of valve plate:724
Cylinder diameter :100
12.26c Rigid rotary feeder 1
Capacity:40 m3/h
rotation:22.4 r/min
12.26cM Reduction Motor 1
Power :1.4kW
12.26d Screw conveyor 1
400 Capacity:68 m3/h
12.26dM Reduction Motor 1
XWD4.4-7-1/49
Power :4.4kW
12.26e Dust cleaning procedure controller 1 set
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 42/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
41
Input/output voltage: 220 V
12.27 Electric louver damper 1 ~0.6 C
Type: ZKYVb-0.04
Size: DN630mm
12.27M Electric actuator 1
DKJ410
Torque:600Nm
12.28 Centrifugal fan 1 1.14 C
9-26 No11.2D
Air volume:21963 m3/h
Full pressure:3140Pa
12.28M Motor 1 0.270
Y240M-6
Power :37kW
Speed of rotation:960 r/min
12.29 Plenum impulse bag filter 3x4.400 C
~12.31 LCPM32-4
Total filtering area: 144 m2
Air volume:11160 m3/hFiltering speed: 1.2m/min
Inlet dust loading:
< 200g/Nm3
Outlet dust loading:
< 40mg/Nm3
Pressure loss:1200~1600Pa
Compressed Air pressure for dust
Cleaning:(4~7)x104 Pa
Air consumption: 1.4 Nm3/min
12.29a Impulse valve 3x4
~12.31a (w. solenoid valve)
Size: 1.4 ”
12.29b Lifting valve(with cylinder ) 3x4
~12.31b Diameter of valve plate:460
Cylinder diameter :63
12.29c Rigid rotary feeder 3
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 43/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
42
~12.31c Capacity:24 m3/h
Rotation:32.31 r/min
12.29cM Reduction Motor 3
~12.31cM Power :1.1kW
12.29d Dust cleaning procedure controller 3set
~12.31d Input/output voltage: 220 V
12.32 Centrifugal fan 3 3x0.090 C
~12.34 4-72 No4A
Air volume:9928 m3/h
Full pressure:3074Pa
12.32M Motor 3 3x~0.070
~12.34M Y160M2-2
Power :14kW
Rotation:2900 r/min
12.34 Manual damper
TPO-13
a. DN340mm 6 6x0.0213 C
b. DN400mm 3 3x0.0313 C
c. DN240mm 1 0.014 Cd. DN700mm 1 0.0603 C
12.36 Manhole 2 2x0.067 C
800x700mm
12.37 Air receiver 1 0.80 C
C-2/0.8
Volume:2m3
Pressure:0.8 MPa
12.38 Compressed air pipe & fittings 1set ~1.4t
Nonstandard parts ~14.0
Insulation material 44m3
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 44/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
43
1.1.13 GYPSUM CRUSHING AND STORING
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
13.01 Apron feeder 1 17.5 C
Capacity:80t/h
13.01M Motor:90KW
13.02 Impact crusher 1 22.8 C
Capacity:70t/h
13.02M Motor:132KW
13.03 Belt conveyor 1 5.9 C
Capacity:90t/h
13.03M Motor:7.5KW
13.04 Belt conveyor 1 20 C
Capacity:90t/h
13.04M Motor:45KW
13.05 Electrical weight 1 0.3 B
Capacity:10~120t/h
13.06 Electric two-way gate 1 0.5 C
13.06M Motor:0.75KW13.07 Rod gates 2 0.5 C
13.08 Vibrating feeder 2 0.9 C
Capacity:100t/h
13.08M Motor:0.5KW
13.09 Belt conveyor 1 3.3 C
Capacity:90t/h
13.09M Motor :5.5KW
13.10 Bag filter 2 6.8 C
Capacity:8930m3/h
13.10M Motor:1.0KW
13.11 Fan 2 0.4 C
Capacity:9928m3/h
Pressure:3.07KPa
13.11M Motor:15KW
13.12 Electric butterfly valve 2 0.8 C
13.12M Actuator Voltage:220V
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 45/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
44
13.13 Hoist 1 2.05 C
Capacity:10t
13.14 Non-standard parts ~5.0 C
13.15 Foundation bolt of equipment 1set ~0.2 C
1.1.14 CEMENT GRINDING & TRANSPORTING
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
14.01
14.01M
Feeder
Electric material dividing valve
Motor:0.75Kw
4 4.0 C
14.02
14.02M
Belt conveyor
Capacity:100t/h
Motor:3.0Kw
2 4.4 C
14.03 Rod gate 6 3.0 C
14.04
14.04M
Feeder
Capacity:15~150t/h
Motor:0.53Kw
2 6.0 C
14.05
14.05M
Feeder
Capacity:1~20t/h
Motor:0.53Kw
2 5.0 C
14.06
14.06M
Belt conveyor
Capacity:130t/h
Motor: 5.5Kw
2 4.2 C
14.07
14.07M
Belt conveyor
Capacity:80t/h
Motor: 3Kw
2 2.3 C
14.08
14.08M
Bucket elevator
Capacity:170t/h
Motor:22Kw
2 13 C
14.09
14.09M
Belt conveyor
Capacity:150t/h
Motor: 5.5Kw
2 3.6 C
14.10
14.10M
Magnetic separator
Motor:3.1Kw
2 4.8 A
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 46/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
45
14.12
14.12M
Belt conveyor
Capacity:180t/h
Motor:4Kw
2 2.8 C
14.13
14.13M1
14.13M2
Roller mill
Main Motor: 1000 Kw
Auxiliary Motor:11Kw 1.5kw 7.75Kw
with reducer 、hydraulic system、
seal fan、lubrication system etc.
2 278.6 A
14.14
14.14M
Bucket elevator
Capacity:220t/h
Motor: 37Kw
2 21 A and B
14.15
14.15M
Belt conveyor
Capacity:80t/h
Motor:3Kw
2 2.4 C
14.16
14.16M1
14.16M2
Cement mill
Capacity:150t/h
Motor:2800Kw
Auxiliary Motor:45Kw
(with reducer 、
high & low lubrication system etc.)
2 596 C
14.17 Air-lock valve 2 4 C14.18 Air slide
Capacity:120t/h
2 1.2 C
14.19
14.19M
Fan
Capacity:2254m3/h
Pressure:5.47KPa
Motor:7.5Kw
2 0.2
14.20
14.20M
Bucket elevator
Capacity:420t/h
Motor:75Kw
2 51 A and B
14.21 Air slide
Capacity:450t/h
2 2.4 C
14.22
14.22M
Fan
Capacity:2254m3/h
Pressure:5.47KPa
Motor:7.5Kw
2 0.2 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 47/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
46
14.23
14.23M
Separator
O-SEPA N2500
Capacity:2500m3/h
Feeding:450t/h(max)
Final production:130t/h
Motor:150Kw
Accessories:reducer,lubrication
system etc.
2 48.8 B
14.24 Flap valve 2 0.4 C
14.25 Air slide
Capacity:450t/h
2 3.6 C
14.26
14.26M
Fan
Capacity:2844m3/h
Pressure:5.52KPa
Motor:7.5Kw
2 0.2 C
14.27 Water spraying system in mill 2 1.0 C
14.28 Louver damper for primary air 2 0.8 C
14.29 Louver damper for secondary air 2 0.4 C
14.30
14.30M
Bag filter
Capacity:201900m3/h
Inlet powder density: 1300g/Nm3Outlet powder density:100g/Nm3
Motor:4Kw
2 110 C
14.31
14.31M
Fan
Capacity:3000m3/h
Pressure:7.12KPa
Motor:11Kw
4 0.8 C
14.32
14.32M
Fan
Capacity:170937m3/h
Pressure:7.38KPa
Motor:630Kw
2 20 C
14.33 Electritic adjustable valve 2 2.0 C
14.34 Air slide
Capacity:120t/h
2 1.8 C
14.35
14.35M
Fan
Capacity:2254m3/h
Pressure:5.74KPa
Motor:7.5Kw
2 0.2 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 48/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
47
14.36 Air slide
Capacity:120t/h
2 1.4 C
14.37
14.37M
Fan
Capacity:2254m3/h
Pressure:5.74KPa
Motor:7.5Kw
2 0.2 C
14.38 Sampler 2 0.3 A
14.39 Air slide
Capacity:450t/h
2 3.8 C
14.40
14.40M
Fan
Capacity:2254m3/h
Pressure:5.74KPa
Motor:7.5Kw
2 0.2 C
14.41
14.41M
Bag filter
Capacity:5450m3/h
Motor:7.4Kw
6 10.3 C
14.42
14.42M
Bridge-type crane
Capacity:30T
Motor:80Kw
2 60 C
14.43 Steel ball elevator
Capacity:3T
2 0.7 C
14.44
14.44
Eletric hoist
Capacity:5T
Motor:8.3Kw
2 1.6 C
14.45
14.45M
Eletric hoist
Capacity:5T
Motor:8.3Kw
2 1.6 C
14.46 Expansion joint 6 3.0 C
14.47 Air compressed pipes & parts 1set 3.0 C
14.48 Grinding media 216 C
14.49 Insulation material 100m3 C
14.50 Non-standard parts 113 C
14.51 Foundation bolt of equipment 1set 10 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 49/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
48
1.1.15 CEMENT STORAGE
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
15.01
15.01M
Bucket elevator
Capacity:380t/h
Motor power 75Kw
1 23.7 A
15.02 Air slide
Capacity:380t/h
2 12 C
15.03
15.03M
Fan
Capacity:1986m3/h
Pressure:5980Pa
Motor:7.5Kw
4 0.60 C
15.04 Aerating system in silo 6 24 C
15.05 Silo bottom discharger
Capacity:30~120t/h
Including:discharging unit
brake valve、pneumatic screw gate
12 8 A
15.06
15.06M
Air distributor
Motor:4 kW
6 11 C
15.07
15.07M
Roots blower
Capacity:16m3/min
Pressure:58.8KPa
Motor:22 kW
6 11 C
15.08 Air slide
Capacity:160t/h
4 15.4 C
15.09
15.09M
Fan
Capacity:1986m3/h
Pressure:5980Pa
Motor:7.5 kW
8 12 C
15.10
15.10M
Bag filter
Capacity:8930m3/h
Motor:4 kW
2 6.8 C
15.11
15.11M
Fan
Capacity:10197m3/h
Pressure:3185Pa
Motor:15 kW
2 0.4
15.12 Door for man hole on the
top of silo 700x800mm
2 6.8 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 50/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
49
15.13 Door for man hole by the
side of silo 800x600mm
6 0.9 C
15.14 Measure hole cover 6 0.06 C
15.15 Air pipe network 30 C
15.16 Compressed air pipe ~1.0 C
15.17 Non-standard parts 10 C
1.1.16 CEMENT PACKING & BAGGED CEMENT STORING
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
16.01
16.01M
Bucket elevator
Capacity:300t/h
Motor:55 kW
2 50 C
16.02 Air slide
Capacity:250t/h
2 1.8 C
16.03
16.03M
Fan
Capacity:1986m3/h
Pressure:5980Pa
Motor:7.5 kW
2 0.3 C
16.04
16.04M
Vibrating screen
Capacity:120t/h
Motor:3 kW
4 5.6 A
16.05 Weighing bin
3500x3500x4500mm
Accessories:load cell & brake valve
4 14.8 A
16.06 Screw gate 4 0.3 A
16.07
16.07M
Discharging valve
Capacity:120t/h
Motor:2.2 kW
4 2.8 C
16.08
16.08M
Packer
8-spout rotary type
Capacity:150t/h
Motor:33.75 kW
4 24 A
16.09 Packer hood 4 2.8 C
16.10 Dust conllecting hopper 4 6.4 B
16.11
16.11M
Bagged cement Belt conveyor
Capacity:130t/h
Motor:1.5 kW
4 2.4 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 51/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
50
16.12
16.12M
Belt conveyor for bag adjusting
Capacity:130t/h
Motor:1.5 kW
4 1.6 C
16.13
16.13M
Bag cleaning device
Motor:5.1 kW
4 3.2 C
16.14
16.14M
Broken bag treating device
Motor:4.1 kW
4 4.4 C
16.15
16.15M
Roller conveyor
Capacity:130t/h
Motor:0.75 kW
8 2.4 C
16.16
16.16M
Electric aligning weight
Motor:0.75 kW
4 0.8 C
16.17
16.17M
Belt conveyor
Capacity:130t/h
Motor:5.5kW
4 8.4 C
16.18
16.18M
Roller conveyor
Capacity:130t/h
Motor:2.2kW
4 3.2 C
16.19 Stacker 4 18.8 C
16.20
16.20M
Belt conveyor
Motor:5.5kW
8 13.6 C
16.21
16.21M
Screw conveyor
Motor:7.5kW
4 6.0 C
16.22
16.22M
Bag filter
Capacity:11160m3/h
Motor:1.1Kw
4 17.6 C
16.23
16.23M
Fan
Capacity:11054m3/h
Pressure:2700Pa
Motor:15kW
4 0.6 C
16.24
16.24M
Electric hoist
Capacity:1T
Motor:1.7kW
2 0.2 C
16.25 Compressed air pipes & parts 2.0 C
16.26 Non-stardand parts 40 C
16.27 Foundation bolt of equipment 1set 1.0 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 52/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
51
1.1.17 BULK LOADING STATION FOR TRUCK
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
17.01 Air slide
Capacity:250t/h
1 2.0 C
17.02
17.02M
Fan
Capacity:2576m3/h
Pressure:5639Pa
Motor:7.5Kw
1 0.15 C
17.03 Air slide
Capacity:150t/h
1 0.2 C
17.04
17.04M
Roots blower
Capacity:4.4m3/min
Pressure:39200Pa
Motor:7.5Kw
1 0.3 C
17.05 Discharging device silo side
Capacity:30-200t/h
Including:discharging unit、brake valve、
Pneumatic screw valve、 flow controlling
valve
2 0.6 A
17.06
17.06M
Cement bulker for truck
Capacity:150t/h
Motor:3KW
2 2.4 C
17.07
17.07M
Bag filter PPCS32-3
Capacity:6900m3/h
Motor:1.1Kw
1 2.4 C
17.08
17.08M
Fan
Capacity:7728m3/h
Pressure:3187PaMotor:15Kw
1 0.15 C
17.09 Man hole door on
the top of silo 700x800mm
2 0.1 C
17.10 Cover of measure bin hole 2 0.02 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 53/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
52
1.1.18 COMPRESSED AIR STATION
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
18.01 Air compressor 6 14 C
Discharge Pressure:0.8Mpa
Capacity:20m3/min
Cooling water rate:4.8t/h
18.01M Motor:132Kw 6 4.4
18.02 Rear cooler 6 4.4 C
Cool water consumption:8t/h
Diameter:700mm
18.03 Buffer tank 6 4.24 C
Volume2.4m3
Diameter:1100mm
18.04 Refrigerated compressed air dryer 6 4.0 C
Flow rate:20m3/min
18.04M Motor:4kw
Cool water consumption:3t/h
18.05 Air tank 6 4.0 C
Volume:2m3
Diamter:1000mm
18.06.1.1 Movable axial-flow fan 1 C
Air flow rate:10000m3/h
18.06M Motor:0.74Kw
18.07 Roof fan 4 0.24 C
Air flow rate:7000m3/h
18.07M Motor:2.2kW
18.08 Mon-rail Motor hoist 1 0.29 C
Capacity:3t
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 54/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
53
Lifting height:6m
Lifting Motor power:4.4Kw
Moving Motor power:0.4Kw
1.2 LIST OF WATER EQUIPMENTS
No. Equipment Name & Specification Q'ty Remarks
01 Pump 2 C
140 QW130-30-22
Capacity: 130 m3/h
H=30 m
Motor: 22 kW
02 Pump 6 C
IS100-64-200
Capacity: 130 m3/h
H=40 m
Motor: 22 kW
03 Pump 2 C
IS140-124-314C
Capacity: 160 m3/h
H=20 m
Motor: 14 kW
04 Water treatment 2 C
YG-1
Capacity: 60 m3/h
05 Chlorine dioxide 2 CKW100
06 Sewage treatment 1 C
WSZ-4
Capacity: 120 m3/d
07 Cooling tower 1 C
Fiberglass
Capacity: 140 m3/h
08 Submersible sewage pump 10 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 55/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
54
40QW18-14-1.4
Capacity: 18 m3/h
H=14 m
Motor: 1.4 kW09 Electric valve 16 C
DN240
10 Steel pipe C
DN 300 200 m
DN 240 400 m
DN 200 3000 m
DN 140 1000 m
DN 100 1400 m
2. LABORATORY
Approximate
Item No. Equipment Specification Quantity Weight (t) Remarks
FOR PHYSICAL TEST
01 Pressure tester 1 0.44 C
Type: YA-300
Max. load: 300KN
Motor: 1.1kw
Voltage: 380V
02 Compressive clamp 1 C
Type: BZ (40×62.4mm)
03 Bending tester 1 0.1 C
Type: DKZ-4000A
Max. Pressure: 4000N
Motor: SD-74
Voltage: 220V
04 Bending clamp 2 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 56/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
55
Size: D1020mm
Volume: 2m3
05 Cement specimen mould 40 C
Size: 4×4×160mm
06 Cement motor mixer 2 0.16 C
Type: NRJ-411A
Mixing time: 3min
Motor: YZA7134T2 0.44kw
07 Vibrator 2 0.14 C
Type: GZ-84
Vibrating time: 2min
Motor: JCL22-2 0.24kw
Voltage: 380V
08 Cement paste mixer 2 0.09 C
Type: NJ-160
Mixing time: 120s
Motor: AOD712-4/8 370/170w
09 Cement mortar flowability tester 1 C
Type: NLD-2
10 Wet curing box 1 C
Type: NSW-2
11 Cement standard curing box 3 C
Type: SYB-40B
Heating power: 400w
Cooling power: 93w
humiditing power: 44w
Voltage: 220V
12 Steam tank of stainless steel 1 C
Type: FZ-31A
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 57/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
56
Boiling temperature: 100℃
Temperature rising time: 30min
Time controlled: 3h
Heater power: 4kw
Voltage: 220V
13 Measuring cylinder 2 C
Type: LS-170
Max. measuring volume: 170ml
Min. measuring division: 0.1ml/division
14 Apparatus of mortar 1 C
consistency and setting time
15 Clamp tester 2 C
Type: LD-40
Range of testing:±24mm
16 Clamp 30 C
Type: LJ-174
17 Blaine air premeability apparatus 2 C
Type: DBT-127
18 Jaw crusher 1 0.14 C
Type: SP-60×100mm
Max. feed size: 48mm
Product size: 0.2~14.2mm
19 Test mill 1 0.71 C
Size:Φ400×400mm
Feed size:<7mm
Loading one time: 4kg
Motor: JTC-Y-404 1.4kw
20 Disk pulverizer 2 0.36 C
Size:Φ174mm
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 58/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
57
Max. feed size: 2~3mm
Product size: 0~0.14mm
Motor: 1.1kw
21 Vibrating mill 1 C
Type: GJ-1A
Feed size:<12mm
Loading one time: 100g
Motor: YL-6 1.1kw
22 Negative Pressure sieve apparatus 1 C
Type: FSY-140B
Square hole dimension: 0.08mm
23 Two-layer vibrating screen 1 0.124 C
Type: XSZ-73
Motor: A07134 0.44kw
24 Standard sieve vibrator 1 0.107 C
Type: XSB-70
Sieve:Φ200mm
Motor: 1A07124 370w
25 Infrared heating bulb 2 C
240W with adapter
26 Infrared rapid dessicator 2 C
Type: WS71-1
27 Water sieve 2 C
28 Divider 2 C
Type: SFQ-1
29 Bottle for specific 4 C
Gravity measurement
Size: 240ml
30 Cement level scraper 10 C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 59/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
58
31 Stopwatch 2 C
32 Table weigher 1 C
Capacity: 40kg
33 Table weigher 1 C
Type: N208S1
Capacity: 1~3kg
34 Torque table balance 2 C
Type: NW-100
Max. Capacity: 200g
Graduation: 20mg
35 Analytical balance 1 C
Type: TG-628A
Max. range: 200g
Graduation: 0.4mg
36 Funnel 4 C
37 Glass plate for holding specimen100 C
Size: 300×200×4mm
38 Humidity meter 2 C
Type: WHSM-1
39 Floating thermometer 7 C
40 °C
40 Filter paper 200 C
41 Vernier caliper 2 C
Size: 300mm 0.02mm
42 Iron disc for holding sample 20 C
Size: 200×200×74mm
43 Water sieve 10 C
Size:Φ124×80
Square hole dimension: 0.08mm
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 60/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
59
44 Water sieve 10 C
Size:Φ140×40
Square hole dimension: 0.08mm
45 Standard sieve 10 C
Size:Φ200
Square hole dimension: 0.08mm
46 Standard sieve 4 C
Size:Φ200
Square hole dimension: 0.046mm
47 Standard sieve 4 C
Size:Φ200
Square hole dimension: 0.2mm
48 Standard sieve 4 C
Size:Φ200
Square hole dimension: 0.9mm
49 Clinker sieve 10 C
Size: hole diameter: 4mm
50 Clinker sieve 10 C
Size: hole diameter: 7mm
51 White enamel disc 4 C
Size: 420×370×40mm
FOR CHEMICAL ANALYSIS
52 Box electric furnace 2 C
Type: SX2-4-10
Nominal temperature: 1000℃
Power: 4kw 220V
53 Box electric furnace 1 C
Type: SX2-8-16
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 61/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
60
Nominal temperature: 1600℃
Power: 8kw 220V
54 Electric furnace 4 C
Type: 0.4~1.0kw
55 Constant temperature electric 2 C
drying box
Type: 101-2A
Max. temperature: 300℃
56 Constant temperature 1 C
Electric water bath
Type: 106-2 6 hole
Power: 2.4kw 220V
57 Magnetic heating agitator 2 C
Type: 681
Power: 2.2kw 220V
58 Flame photometer 1 C
For K+
Na+
Type: 6410
59 Photometer 1 C
Type: 7211
Wave length: 200~1000mm
60 CaO Apparatus for f-CaO rapid test 1 C
61 Electric distiller 3 C
Size: 4000ml/h
Power: 4kw 220V
62 Acidimeter 1 C
Type: PHS-3C
63 Ion exchanging water purifier 1 C
Type: 70
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 62/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
61
64 Ion exchanging colume 4 C
Type: 20×400mm
65 Electrionic balance 1 C
Type: BP61
Max. range: 61g
Accuracy: 0.1mg
66 Photoelectric analytical balance 1 C
Type: TG328-A
Max. range: 200mg
Graduation: 0.1mg
67 Industrial balance 1 C
Type: TG628-A
Max. range: 200g
Graduation: 10mg
68 Torque table balance 1 C
Type: NV-100
Max. range: 200g
Graduation: 20mg
69 Alcohol burner 4 C
70 Agate mortar 2 each C
Size:Φ110mm,Φ70mm
71 Ceramic mortar 2 each C
Size:Φ110mm,Φ90mm
72 Platino evaporator 1 C
Size:Φ110mm
73 Nickel evaporator 2 C
Size:Φ110mm
74 Ceramic evaporator 20 each C
Size:Φ120mm,Φ80mm
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 63/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
62
75 Ceramic evaporator 10 C
Size:Φ140mm
76 Platino crucible with cover 4 C
Size: 24ml
77 Silver crucible with cover 10 C
Size: 20~30ml
78 Nickle crucible with cover 10 C
Size: 30ml
79 Ceramic crucible with cover 10 each C
Size: 18ml, 14ml
80 Crucible tong 1 each C
Size: 600mm, 240mm
81 Long handle crucible tong 4 C
82 Short handle crucible tong 10 C
83 Glass graduate 4 each C
Size: 10, 20, 24, 40,
200, 240, 400,1000ml
84 Glass graduate 20 C
Size: 100ml
85 Baker 10 C
Size: 800ml
86 Baker 40 each C
Size: 100, 140, 600ml
87 Baker 30 each C
Size: 300, 240, 400, 400ml
88 Flask 10 each C
Size: 240, 400ml
89 Washing bottle 10 each C
Dim glass plug
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 64/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
63
Size: 100, 240, 400, 1000ml
90 Reagent bottle 10 each C
Small mouth dim glass plug
Size: 100, 240, 400, 1000ml
91 Distilled bottle 10 each C
With piston
Size: 10000, 20000ml
92 Brown reagent bottle 6 each C
Small mouth dim glass plug
Size: 240, 1000, 2400ml
93 Specimen bottle 30 each C
Size:Φ60×120,Φ74×140mm
94 Sample bottle 40 each C
Big mouth dim glass plug
Size: 140, 400ml
95 Sample bottle 300 C
Big mouth dim glass plug
Size: 60ml
96 Weighing bottle 30 C
Dim glass plug
Size:Φ40×24ml
97 Volumetric flask 20 each C
With glass plug
Size: 100, 240, 400, 1000ml
98 Dropping bottle 20 C
Size: 24ml
99 Filtering bottle 4 each C
Size: 400, 1000ml
100 Buret 14 each C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 65/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
64
Size: 24, 40ml
101 Buret 6 C
Size: 40ml
102 Microburet 2 each C
Size: 1, 2ml
103 Pipette 3 each C
Size: 40ml
104 Pipette 10 each C
Size: 4, 10, 20, 24ml
105 Pipette 6 each C
Size: 40, 100ml
106 Pipette 2 each C
Size: 140, 200ml
107 Test tube 40 each C
Size: 18, 24ml
108 Drying tube 10 C
Type: U single ball
109 Dryer 4 C
Size:Φ140ml
110 Dryer 6 C
Size:Φ200ml
111 Dryer 2 C
Size:Φ300ml
112 Condensing pipe 10 C
Type: shaft
113 Condensing pipe 4 C
Type: spherical
114 Condensing pipe 4 C
Type: snake
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 66/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
65
115 Funnel long tube 4 each C
Size: 60 °Φ60mm,Φ64mm
116 Funnel short tube 4 each C
Size: 60° Φ74mm,Φ140mm
117 Watch glass 30 each C
Size:Φ74, 100, 124, 140, 180mm
118 Orsat gas analyzer 1 C
Type: 4 tube
119 Portable photo pyrometer 1 C
Type: WGG2-202
120 Portable infrared therometer 1 C
Type: ST6
Temperature range: -20~400℃
121 Anemometer 1 C
Type: QDF-3
Speed range: 0.04~30m/s
122 Smoke tester 1 C
Type: SYC-1A
123 Thermometer 10 C
Size: 100℃
124 Mercury thermometer 4 each C
Size: 140, 200, 360, 400℃
125 Desk computer 1 C
126 Reagents For Chemical Analysis 1 set C
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 67/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
66
LIST OF ELECTRICAL EQUIPMENT AND MATERIAL
Item E-1 Limestone crushing and conveying
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear LV 2
indoor, withdrawable type,
rated breaking current: 30KA
02 Speed-regulation device 1
for apron feeder, 44Kw
03 Liquid rheostat 1set
for 6KV, 1800Kw
wound rotor induction Motor
04 Control box for bag filter 1
05 Knife switch with fuse 1
380V 80A
06 Knife switch with fuse 1
380V 200A
07 Knife switch with fuse 1
380V 30A
08 Local control box 8
For start-stop by Motor
09 Rotate detector 3
10 Rope switch 4
11 Starting signal board 2
240x240 PVC board
with a bell & a lamp
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 68/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
67
Item E-2 Clay crushing and conveying
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 1
indoor, withdrawable type,
rated breaking current: 30KA
02 Speed-regulation device 1
for apron feeder, 30Kw
03 Liquid rheostat 1set
for 6KV, 220KW
wound rotor induction Motor
04 Control box for bag filter 1
05 Knife switch with fuse 2
380V 80A
06 Knife switch with fuse 1
380V 30A
07 Local control box 6
for start-stop by Motor
08 rotate detector 2
09 Starting signal board 1
240x240 PVC board
with a bell & a lamp
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 69/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
68
Item E-3 Clay preblending stockpile
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 2
indoor, withdrawable type,
rated breaking current: 30KA
02 Stacker control device 1set
03 Reclaimer control device 1set
04 Control box for bag filter 1
05 Knife switch with fuse 2
380V 80A
06 Local control box 8
for start-stop by Motor
07 Rotate detector 3
08 Rope switch 22
09 Starting signal board 2
240x240 PVC board
with a bell & a lamp
Item E-4 Limestone preblending stockpiled
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 2
indoor, withdrawable type,
rated breaking current: 30KA
02 Stacker control device 1set
03 Reclaimer control device 1set
04 Control box for bag filter 1
05 Knife switch with fuse 2
380V 80A
06 Local control box 4
for start-stop by Motor
07 rotate detector 3
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 70/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
69
08 rope switch 34
09 Starting signal board 2
240x240 PVC board
with a bell & a lamp
Item E-5 Raw materials proportioning station
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 1
indoor, withdrawable type,
rated breaking current: 30KA
02 Control box for bag filter 2
03 Knife switch with fuse 2
380V 80A
04 Local control box 8
for start-stop by Motor
05 Rotate detector 2
06 Rope switch 8
07 Starting signal board 2
240x240 PVC board
with a bell & a lamp
Item E-6 Raw material grinding and exhaust gas treatment
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 6
indoor, withdrawable type
rated breaking current: 30KA
02 Speed-regulation device 1
for separator, 130Kw
03 Liquid rheostat 1set
for 6KV, 3400Kw
wound rotor induction Motor
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 71/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
70
04 Control panel 1
for magnetic separtor
05 Control panel 1
for metal detectied
06 VVVF device 1set
6KV 2400KW
07 VVVF device 1set
6KV 2400KW
08 HT rectifing device for EP 6sets
For exhaust gas treatment system
09 LV control device for EP 1set
For exhaust gas treatment system
10 Control box for bag filter 2
11 Knife switch with fuse 2
380V 80A
12 Local control box 40
for start-stop by Motor
13 rotate detector 3
14 Starting signal board 3
240x240 PVC board
with a bell & a lamp
15 Control or connection panel 1 set
for raw mill
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 72/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
71
Item E-7 Preheater ID FAN
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 3
indoor, withdrawable type
rated breaking current: 30KA
02 HT rectifing device for EP 6sets
For by-pass system
03 LV control device for EP 1set
For by-pass system
04 Knife switch with fuse 1
380V 80A
05 Local control box 24
for start-stop by Motor
06 Rotate detector 8
07 Starting signal board 2
240x240 PVC board with a bell & a lamp
Item E-8 Raw meal homogenizing silo
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 4
indoor, withdrawable type
rated breaking current: 30KA
02 Control panel 2
for aerating in homo-silo
03 Control box for bag filter 3
04 Knife switch with fuse 2
380V 80A
05 Local control box 20
for start-stop by Motor
06 rotate detector 1
07 Starting signal board 2
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 73/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
72
240x240 PVC board
with a bell & a lamp
Item E-9 Kiln feeding
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 2
indoor, withdrawable type
rated breaking current: 30KA
02 Control box for bag filter 2
03 Knife switch with fuse 1
380V 80A
04 Local control box 14
for start-stop by Motor
05 rotate detector 2
06 Starting signal board 1
240x240 PVC board
with a bell & a lamp
Item E-10 Preheater and precalciner
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 1
indoor, withdrawable type
rated breaking current: 30KA
02 Control panel 1
for air blaster
03 Control panel 1
for air lance system
04 Knife switch with fuse 2
380V 80A
05 Local control box 6
for start-stop by Motor
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 74/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
73
06 Starting signal board 2
240x240 PVC board
with a bell & a lamp
Item E-11 Kiln and tertiary air duct
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 3
indoor, withdrawable type
rated breaking current: 30KA
02 Thyristor rectifier device 1set
for kiln driver
430Kw, DC440V
with 6KV rectifier transformer
03 Knife switch with fuse 1
380V 80A
04 Local control box 24
for start-stop by Motor
05 Starting signal board 1
240x240 PVC board
with a bell & a lamp
Item E-12 Clinker cooling
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 6
indoor, withdrawable type
rated breaking current: 30KA
02 Thyristor rectifier device 3set
or kiln driver, 44Kw, DC440V
03 Frequency rheostat 1set
for wound rotor induction Motor
380V, 44Kw
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 75/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
74
04 HT rectifing device for EP 6sets
For cooler system
05 LV control device for EP 1set
For ecooler system
06 Control device 1set
for oil burn system
07 Knife switch with fuse
380V 80A 2
380V 30A 2
08 Local control box 44
for start-stop by Motor
09 Rotate detector 4
10 Starting signal board 3
240x240 PVC board with a bell & a lamp
Item E-13 Clinker storage and conveying
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 3
indoor, withdrawable type
rated breaking current: 30KA
02 Control box for bag filter 8
03 Knife switch with fuse 2
380V 80A
04 Local control box 30
for start-stop by Motor
05 Rotate detector 8
06 Rope switch 14
07 Starting signal board 2
240x240 PVC board
with a bell & a lamp
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 76/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
75
Item E-14 Gypsum crushing and storing
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 2
indoor, withdrawable type
rated breaking current: 30KA
02 Speed-regulation device 1
for apron feeder, 70Kw
03 Frequency rheostat 1
for 380V, 130Kw
wound rotor induction Motor
04 Control box for bag filter 2
05 Knife switch with fuse 1
380V 80A
06 Local control box 12
for start-stop by Motor
07 Rotate detector 4
08 Rope switch 18
09 Starting signal board 2
250x250 PVC board
with a bell & a lamp
Item E-15 Cement grinding and conveying
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 14
indoor, withdrawable type
rated breaking current: 30KA
02 Thyristor rectifier device 2sets
for separator Motor
150Kw, DC440V
03 Liquid rheostat 2sets
for 6KV, 3000Kw
wound rotor induction Motor
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 77/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
76
04 Liquid rheostat 2sets
for 6KV, 1000Kw
wound rotor induction Motor
05 Control panel 2
for magnetic separtor
06 Control panel 2
for metal detectied
07 Control panel 2 set
for water spary system of cement mill
08 Control box 2
for cement mill system bag filter
09 Control box for bag filter 6
10 Knife switch with fuse
380V 200A 2
380V 80A 3
380V 30A 4
11 Local control box 96
for start-stop by Motor
12 Rope switch 6
13 Rotate detector 18
14 Starting signal board 4
250x250 PVC board
with a bell & a lamp
15 Control or connection panel 2sets
for cement pre-grinding mill
Item E-16 Cement storing
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 4
indoor, withdrawable type
rated breaking current: 30KA
02 Control box for bag filter 2
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 78/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
77
03 Knife switch with fuse 2
80V 80A
04 Local control box 40
for start-stop by motor
05 Rotate detector 1
06 Starting signal board 2
250x250 PVC board
with a bell & a lamp
Item E-17 Cement packing and bagged cement storing
Ser. No. Equipment and Specification Q'ty Remarks
01 LV drawer-type switchgear 7
indoor, withdrawable type
rated breaking current: 30KA
02 Control box for bag filter 4
03 Knife switch with fuse
380V 80A 2
380V 30A 2
04 Local control box 56
for start-stop by motor
05 Rotate detector 26
06 Rope switch 8
07 Starting signal board 4
250x250 PVC board
with a bell & a lamp
08 Control device 4sets
for cement packer
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 79/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
78
Item E-18 Bulk loading station for truck
Ser. No. Equipment and Specification Q'ty Remarks
01 Nonstandard control cabinet 1
800x650x2200,
02 Control box 2
for bulk for truck
03 Control box for bag filter 1
04 Knife switch with fuse 1
380V 80A
05 Local control box 6
for start-stop by motor
06 Starting signal board 2
250x250 PVC board
with a bell & a lamp
Item E-19 Compressed air station
Ser. No. Equipment and Specification Q'ty Remarks
01 Nonstandard control cabinet 2
800x640x2200,
02 Control device 8sets
for air compressor
03 Knife switch with fuse 2
380V 80A
04 Knife switch with fuse 2
380V 30A
04 Local control box 10
for start-stop by motor
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 80/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
79
Item E-20 Circulating water pump room
Ser. No. Equipment and Specification Q'ty Remarks
01 Nonstandard control cabinet 4
800x640x2200,
02 Local control box 11sets
400×400×120mm
03 Knife switch with fuse 1
380V 80A
04 Knife switch with fuse 1
380V 30A
05 Local control box 13
for start-stop by motor
Item E-21 Limestone crushing electrical room
Ser. No. Equipment and Specification Q'ty Remarks
01 Power transformer 1
630KVA 6/0.4KV
D,Yn-11
02 6.3KV drawer-type switchgear 7
indoor,metalclad,with drawable type,
rated voltage: 6.3kv,
rated breaking current: 31.4KA
03 Ni-Cd battery DC panel 1set
rated input voltage: AC 380V
rated output voltage: DC 220V
rated Capacity: 20AH
04 Control and signal panel 2
indoor, metal panel
04 LV drawer-type switchgear 4
indoor, with drawable type,
rated breaking current: 30KA
06 LV Enclosing bus chute 3m
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 81/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
80
used for power incomming
of LV switchgear, 380V, 1400A
07 PLC control device PCL 1set
Item E-22 Preblending electrical room
Ser. No. Equipment and Specification Q'ty Remarks
01 Power transformer 1
1000KVA, 6/0.4KV
D,Yn-11
02 HV on-load switch 1
6.3KV
03 LV drawer-type switchgear 7
indoor, with drawable type,
rated breaking current: 30KA
04 LV Enclosing bus chute 3m
LV used for power incomming
of LV switchgear, 380V,2000A
05 PLC control device PLC 1set
Item E-23 Raw Ginding electrical room
Ser. No. Equipment and Specification Q'ty Remarks
01 Power transformer 2
1240KVA 6/0.4KV
D,Yn-11
02 6.3KV drawer-type switchgear 20
indoor,metal-closed,with drawable type,
rated voltage: 6.3kv,
rated breaking current: 31.4KA
03 HV capacitor compensation panel 2set
1340Kvar 6.3KV
04 Ni-Cd battery DC panel 1set
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 82/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
81
rated input voltage: AC 380V
rated output voltage: DC 220V
rated Capacity: 40AH
05 Control and signal panel 4
indoor,metal panel
06 HV Enclosing bus chute 10m
used for liaison of HV switchgear
metalclad
6.3KV 1000A
07 LV drawer-type switchgear 14
indoor, with drawable type,
rated breaking current: 30KA
08 LV Enclosing bus chute 10m
used for power incomming and liaison
of LV switchgear,
380V 2000A
Item E-24 Preheater electrical room
Ser. No. Equipment and Specification Q'ty Remarks
01 Power transformer 1
1000KVA 6/0.4KV
D,Yn-11
02 HV on-load switch 6.3KV 1
03 LV drawer-type switchgear 6
indoor, with drawable type,
rated breaking current: 30KA
04 LV Enclosing bus chute LV 3m
used for power incomming
of LV switchgear, 380V,2000A
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 83/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
82
Item E-25 Cooler electrical room
Ser. No. Equipment and Specification Q'ty Remarks
01 Power transformer 2
1000KVA 6/0.4KV, D,Yn-11
02 6.3KV drawer-type switchgear 16
indoor, metal-closed, with drawable type,
rated voltage: 6.3kv
rated breaking current: 31.4KA
03 HV capacitor compensation panel 2sets
1340KVar, 6.3KV
04 Ni-Cd battery DC panel 1set
rated input voltage: AC 380V
rated output voltage: DC 220V
rated Capacity: 40AH
05 Control and signal panel 4
indoor,metal panel
06 HV Enclosing bus chute 10m
used for liaison of HV switchgear
6.3KV 1000A, metal enclosed
07 LV drawer-type switchgear 14
indoor, with drawable type,
rated breaking current: 30KA
08 LV Enclosing bus chute 10m
used for power incomming and liaison
of LV switchgear,
380V 2000A
Item E-26 Cable,Wire and Laying Parts
Ser. No. Equipment and Specification Q'ty Remarks
01 H.T. power cable 14km
YJV-6 3x40~3x240mm2
02 Polyethyene power cable 2km
ZLQDC 1x94mm2
03 Power cable 120km
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 84/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
83
VV-1 3x4+1x2.4~3x184+1x94mm2
04 Control cable 180km
KVV-0.4 4x1.4~39x1.4mm2
04 Cable tray 600x140 11km
06 Cable tray 400x100 4km
07 Steel tube 34km
G dia.20~100
08 Flat steel 14km
--24x4, --40x4
09 Angle steel L40x40x4 4km
10 Power wire 2.4~4mm2
60km
11 On-wall box for lighting 30sets
12 Lighting equipment 1set
For all plant
Item E-27 Emergency power source
Ser. No. Equipment and Specification Q'ty Remarks
01 Diesel generator units 1set
800KW 380V 40Hz
automatic starting
4. LIST OF PROCESS CONTROL SYSTEM
4.1 DISTRIBUTED CONTROL SYSTEM
ITEM NAME & SPECIFICATION QTY REMARKS
1.1 Operator station with CRT workplaces 6sets
each (one for coment packing locally)
1.2 Printer 3sets
1.3 Hardcopy 1set
1.4 Local control station 4sets
1.5 Special communication cables all
with necessary communication interface
1.6 UPS 10kVA with battery 1set
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 85/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
84
for 14 mini. for CCR
1.7 UPS 4kVA with battery 4sets
for 10 mini. for ER1-4
1.8 Basic engineering all
1.9 Detail application engineering all
4.2 QUALITY CONTROL SYSTEM (QCS)
ITEM NAME & SPECIFICATION QTY REMARKS
2.1 Spectrometer (X-ray) 1set
2.2 Grinding mill. Presser etc. 1set
2.3 Sample preparation equipment 1set
2.4 Quality control computer system 1set
with the printer etc.
2.5 Detail application engineering all
4.3 SCANEX SYSTEM
ITEM NAME & SPECIFICATION QTY REMARKS
3.1 Infrared scanning sensor 1set3.2 Scanex computer system with CRT1set
3.3 Colour printer 1set
3.4 Detail application engineering 1set
4.4 INSTRUMENTATION
ITEM NAME & SPECIFICATION QTY REMARKS
4.01 ITV system for kiln with its 1set
aux. equipment and accessories
4.02 ITV system for cooler with its 1set
aux. equipment and accessories
4.03 ITV for preblending bed 2sets
4.04 Gas analyser CO/O2/NOx for kiln inlet 1set
CO/O2/NOx
4.05 Gas analyser CO/O2 for kiln preheater 1set
CO/O2
4.06 Temperature transmitter with 100sets
7/18/2019 Technical Report and Equipment List 1,5Mio To
http://slidepdf.com/reader/full/technical-report-and-equipment-list-15mio-to 86/86
5000T/D Cement Production Line IRD Swiss Technical Proposal
thermocouple or pt100 sensors
4.07 Pressure transmitter 80sets
4.08 Level switch 30sets
4.09 Level detector, continuos 30sets
4.10 Aux. control panel with 14sets
electrical control elements inside
4.11 Preventive maintenance tools 1set
for instrumentation