technical specificationstourism.gov.ph/files/accreditationstickers... · 3d/5d tamper-proof...
TRANSCRIPT
ANNEX F
Technical Specifications
Item Specification Statement of Compliance1
I. Minimum Requirement for Suppliers
Submission of the following
for the Stickers:
1. Proposed materials to be used in the sticker as specified in the layout.
2. Please indicate in the bid the unit cost per item
Submission of the following
for the Certificate:
1. Submission of at least two (2) sample design/layout of the Certificate
2. Submission of sample works and materials to be used in the Certificate
3. Please indicate in the bid the unit cost per item
II. Scope of Work: LOT I – ₱ 996,950.00
A. Printing of DOT Accreditation Stickers for Tourist Transport Vehicles with Tamper-Proof Security Hologram Sticker (See attached layouts)
1 Bidders must state here either “Comply” or “Not Comply” against each of the individual parameters of each
Specification stating the corresponding performance parameter of the equipment offered. Statements of “Comply”
or “Not Comply” must be supported by evidence in a Bidders Bid and cross-referenced to that evidence. Evidence
shall be in the form of manufacturer’s un-amended sales literature, unconditional statements of specification and
compliance issued by the manufacturer, samples, independent test data etc., as appropriate. A statement that is not
supported by evidence or is subsequently found to be contradicted by the evidence presented will render the Bid
under evaluation liable for rejection. A statement either in the Bidders statement of compliance or the supporting
evidence that is found to be false either during Bid evaluation, post-qualification or the execution of the Contract
may be regarded as fraudulent and render the Bidder or supplier liable for prosecution subject to the provisions of
ITB Clause 3.1 (a)(ii) and/or GCC Clause 2.1 (a)(ii)..
ANNEX F
Item Specification Statement of Compliance1
General Specifications
Reflectorized DOT Accreditation Sticker (See attached layout as Annex A and B)
3D/5D Tamper-Proof Security Hologram Sticker with protective overlay (See attached layout as C-2)
High Quality Vinyl Reflective Sticker
Waterproof, Scratch-free, Heat Sensitive
Full Colour
Writable and Non-Erasable portion in the sticker as shown in the attached layout
Two (2) years Outdoor Durability
A.1 STICKER FOR TOURIST TRANSPORT VEHICLE B.1 TOURIST VEHICLES
REQUIREMENT
Type of Vehicle:
Car/Van:
Front Sticker: 5.5 in (length) x 4.0 in
(width) Qty./pcs.= 3,098
Back Sticker: 7.0 in (length) x 5.0 in
(width) Qty./pcs.= 3,098
Mini Bus/Bus:
Front Sticker: 8.0 in (length) x 5.5 in
(width) Qty./pcs.=905
Back Sticker: 9.5 in (length) x 7.0
(width) Qty./pcs.=905
B.2 SERVICE VEHICLES REQUIREMENT
Type of Vehicle:
Car/Van:
Front Sticker: 5.5 in (length) x 4.0 in
(width) Qty./pcs.= 572
Back Sticker: 7.0 in (length) x 5.0 in
(width) Qty./pcs.=572
ANNEX F
Item Specification Statement of Compliance1
LOT II – ₱ 720,000.00 A. Printing of DOT Accreditation
Stickers for Tourism Enterprises & Other Tourism-Related Enterprises with Tamper-Proof Security Hologram Sticker (See attached layouts)
General Specifications
Reflectorized DOT Accreditation Sticker (See attached layout as Annex C and D)
3D/5D Tamper-Proof Security Hologram Sticker with protective overlay (See attached layout as C-2)
High Quality Vinyl Reflective Sticker
Waterproof, Scratch-free, Heat Sensitive
Full Colour
Writable and Non-Erasable portion in the sticker as shown in the attached layout
Two (2) years Outdoor Durability
A.1 STICKER FOR TOURISM ENTERPRISES
Quantity: 6,000 pcs.
Size: 8.0 in (length) X 5.5 in (width)
Entity Type:
Tourism Enterprises
Accommodation Establishments:
Hotel = 714 Qty./pcs..
Resort= 473 Qty./pcs. Apartment Hotel=100 Qty./pcs. Mabuhay Accommodation=1,300
Qty./pcs. Homestay=330 Qty./pcs.
ANNEX F
Item Specification Statement of Compliance1
Travel and Tour Services: Travel and Tour Agency=830 Qty./pcs. Travel Agency=330 Qty./pcs. Tour Operator=370 Qty./pcs. Online Travel and Tour Agency=15
Qty./pcs. Tourist Air Transport Operator=15
Qty./pcs. Tourist Water Transport Operator=120
Qty./pcs. Other Primary Tourism Enterprises: MICE Facility/Venue=17 Qty./pcs. MICE Organizer=21 Qty./pcs. Health and Wellness Facilities: Ambulatory Clinic=30 Qty./pcs. SPA=104 Qty./pcs. Tertiary Hospital=14 Qty./pcs. Tourism Related Enterprises: Agri-Tourism/Farm Site=205 Qty./pcs. Restaurant=385 Qty./pcs. Tourism Training Center=40 Qty./pcs. Stickers for Other Tourism Related
Enterprises (Generic): Adventure and Ecotourism Facility,
Department Store, Gallery, Museum,
Medical Concierge, Rest Area, Shooting
Range, Specialty Shop, Sports and
Recreational Club/Center, Tourism
Recreation Center, Tourism
Entertainment Complex, Zoo= 587
Qty./pcs.
LOT III – ₱ 523,750.00
A. Design and printing of Accreditation Certificate Specifications:
Size: 8.5” x 11” Orientation: Landscape Paper: Official
Document Specialty
ANNEX F
Item Specification Statement of Compliance1
Security Paper (inkjet compatible) (Red Ribbon
Authentication Certificate of DFA as reference – Please see attached as Annex E)
GSM: Range of 150-170 gsm (or may change depends on the thickness of the certificate of DFA as reference)
Background: Wave (that forms like a shell)
Background Color: Ivory/Cream
Border: Guilloche Border (winning bidder may recommend the design)
Border Color: Blue/Light Blue
Security Features: (Please see attached samples as reference) Fluorescent UV Ink:
Department of Tourism Logo
(Invisible Images are visible when viewed under black light)
Hidden Message Technology:
Text: OFFICIAL COPY (appear on copy when document is photocopied or scanned)
Coin Activated Security Back Print: Text: OFFICIAL
DOCUMENT
(The Official Document Words are hidden in a border on the back
ANNEX F
Item Specification Statement of Compliance1
of the sheet)
3D/5D Tamper-Proof Security Hologram Sticker with protective overlay (Please see attached as Annex I)
Design to include the ff.: (Please see attached Annex F,G and H as reference)
A.1 Accreditation Certificates for Star-Rated Hotels, Resorts and Apartment Hotels (Please find attached breakdown)
Total Quantity: 75 pcs.
Front: Tourism Quality Seal
Logo (Size 1 x 1) – Embossed and Full Colour
Star Rating Icon/Image – Gold Stamping and Embossed
(1 star to 5 star classification)
Department of Tourism Logo - Fluorescent UV Ink
ISO 9001:2015 OFFICIAL COPY - Hidden
Message Technology WARNING: UNAUTHORIZED
TRANSFER AND/OR REPRODUCTION OF THIS CERTIFICATE IS PUNISHABLE BY LAW. Back:
OFFICIAL DOCUMENT – Coin Activated Security Back Print
ANNEX F
Item Specification Statement of Compliance1
(Hidden in a border on the back of the sheet)
A.2 Accreditation Certificates for Tourism Enterprises and Frontliners
(Please find attached breakdown)
Total Quantity: 5,125 pcs.
Front:
Tourism Quality Seal Logo (Size 1 x 1) – Embossed and Full Colour
Department of Tourism Logo - Fluorescent UV Ink
ISO 9001:2015 OFFICIAL COPY - Hidden
Message Technology WARNING: UNAUTHORIZED
TRANSFER AND/OR REPRODUCTION OF THIS CERTIFICATE IS PUNISHABLE BY LAW.
Back: OFFICIAL DOCUMENT – Coin
Activated Security Back Print (Hidden in a border on the back of the sheet)
II. Approved Budget for the Contract
TWO MILLION TWO HUNDRED FORTY THOUSAND SEVEN HUNDRED
PESOS (₱ 2,240,700.00) inclusive of all
applicable taxes III. Submission of Sample for DOT
Approval
Within seven (7) working days upon receipt of Notice to Proceed.
IV. Delivery Period
Within Fifteen (15) working days after the receipt of approved Sample.
V. Payment Procedure Full payment shall be processed
after delivery and acceptance of
ANNEX F
Item Specification Statement of Compliance1
2019 DOT Accreditation Stickers and Certificate and upon receipt of billing statement based on the Government Payment Procedures.
VI. Compliance to Specifications/Provisions
Non-submission of sample works and materials to be used in the Certificates and Stickers shall be ground for disqualification of bid.
The WINNING BIDDER, however, shall be determined not solely based on the amount of bid but shall also consider the over-all compliance with the design and quality of the submitted sample of DOT Accreditation Stickers and Certificates.
The WINNING BIDDER shall warrant its performance in accordance with the specifications as stated in this TOR, and design/concepts as approved by the DOT-END USER and that any and all resulting defects or deviations shall be corrected by the WINNING BIDDER at its own expense immediately upon being informed thereof by the DOT-END USER.
•The WINNING BIDDER shall keep in confidence all confidential information provided by the end-user and shall not use, reproduce, nor disclose to others the approved 2019 DOT Accreditation Stickers and Certificates design, layout, etc. except to those persons entrusted/authorized by the DOT-END USER