technology nature society - distributor & supplier of ... · triplex ® rawedge cogged v-belt...

T e c h n o l o g y N a t u r e S o c i e t y

Industrial Power Transmission Products

V632-C

• If you expect that a belt will fail, and stop the system, provide safety device to avoid injury.

• Do not use a belt as a lifting or towing tool.

• If you expect that static electricity will come from the power transmission belt system, thus causing fire of malfunction of thecontroller, use an antistatic belt and set a neutralization apparatus in the system.

• Do not use a belt as an insulator. Contact manufacturer for information on installation properties, which vary in belt type.• For a belt that touches food directly, use one that compiles with the applicable food hygiene law of your country.• Do not modify a belt, its quality and performance could deteriorate.

• Do not use a belt beyond its capacity of for an application other than that specified by the catalog, design documents, etc. This cancause premature failure of the belt.

• If water, oil, chemical, paint, dust, etc. sticks to a belt or pulley, its power transmission could deteriorate and the belt may fail.• A cogged belt makes louder noises during high-speed rotation. If this occurs, use a soundproof cover.

• To store a heavy belt, use a suitable jig or stopper to prevent accidents such as belt toppling or tumbling.

• Use suitable equipment to carry/handle a heavy belt or pulley. Otherwise, back injury may result.• Do not put weight on or bend a belt forcibly to carry or store it. Otherwise, it will produce defects or scratches to the belt,resulting in damage.

• Store the belt in low humidity and a temperature range of 14°F to 104°F. Do not expose belts to direct sunlight.

• Install a safety cover over rotating components including belt/pulley. Otherwise, hair, gloves and clothing can become entangledin the belt/pulley. If a belt/pulley breaks, fragments may cause injuries.

• Take the following precautions to maintain, inspect, and replace a belt.1) Turn off the power and wait until the belt and pulley have stopped completely.2) Secure machinery so that it may not move during belt removal.3) Use caution: Do not unintentionally turn on power.

• Use the same type of belt or pulleys per OEM specification. Use of a different type may cause premature failure.• Misalignment of the pulleys can damage the belt and result in flange failure. Make proper adjustments to system.• Loosen the belt tension when changing belts. Do not force or stretch a belt over the flange. Do not use a screw driver or othersharp objects into when replacing the belt as this will result in damage.

• Apply the appropriate belt tension as specified by the relevant catalog and design documents, etc. Inappropriate tension couldresult in damage of the belt and shaft.

• Take the following precautions to modify the pulley in use:1) Remove burrs and maintain proper pulley angle;2) Secure accurate dimensions after modification;3) Maintain the pulley strength after modifications.

• Before assembling the flange with the pulley, check for foreign materials between the pulley and flange. Fasten the flange witha appropriate tool. Inappropriate installation could result in the flange coming off.

• Do not burn belt; hazardous gas could be produced.

• Please take all necessary precautions when using our products. Also, please review relevant product catalog and design documents, etc.Significances of safety precautions are categorized as follows:

Danger

WarningCaution

Imminently causing death or severe injury to the user who misusesproducts.

Possibly causing death or severe injury to the user who misusesproducts.

Possibly causing personal injury or property damage if misused.

i

• Do not use the belt as a lifting or towing device.• To convey unpackaged food, use a belt that complieses with the applicable food hygiene laws of your country.

• To store a large plastic conveyor belt, use a suitable jig or stopper to prevent accidents due to belt toppling or tumbling.

• Use suitable equipment to carry and handle large plastic conveyor belts. Otherwise, back injury may result.

• Before fitting and inspecting the plastic conveyor belt, be sure to turn off the power of the conveyor and related systems and check to make sure that conveyorhas stopped, to prevent accidents.

• Fix a safety guard to avoid close contact with conveyor belt in use. Otherwise, you may become entangled in the conveyor system.

• Solvents and adhesives used for endless type belts is flammable. Open flames are allowed during operation.

• Provide an additional safety device that will stop power to avoid fatal accident should coupling break or come free!

• Do not use product for applications other than specified in the catalog, design documents, etc. Otherwise, the product could fail prematurely.

• Use an appropriate jig or stopper to prevent a large coupling from toppling and tumbling. Do not store coupling at a height where it could cause injury if it fails.

• Use suitable equipment when carrying or handling a large coupling, depending on its weight. Otherwise, back injury may result.

• Be sure to put a safety cover over the the rotating components including the coupling. Otherwise, hair, gloves, or clothing may become entangled. Also, injurymay occur if parts fly off.

• Secure coupling. Otherwise, the coupling and its parts may come off.• Take the following precautions to maintain, inspect or replace coupling.1) Turn off the power and wait until the machine stops completely.2) Fix machinery so that it may not move during removal of the coupling.3) Take care not to unintentionally turn on the switch.

• Before you operate the machine, check to make sure unused bolts or tools are removed after installation of the coupling. If operation starts with unused itemsbeing left behind, they could be flung off, causing injuries.

• Replace with the same type of couplings. Use of a different type of coupling will result in premature failure.• Adjust coupling property. Otherwise, deflection or declination will damage or displace the coupling.

• Do not burn the coupling. Otherwise, hazardous gas could be produced.

Danger

WarningCaution

Imminently causing death or severe injury to the user who misusesproducts.

Possibly causing death or severe injury to the user who misusesproducts.

Possibly causing personal injury or property damage if misused.

ii

Has

vi

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. i - ii

Gigatorque GX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. iii - vii

Metric V-Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. viii

Power Transmission Belts and Related Products

I. Synchronous Power Transmission . . . . . . . . . . . . . . . . . . . . . . . P. 1 - 28

II. Frictional Forced Power Transmission Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 29 - 54

III. Direct PowerConnected Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 55 - 57

IV. Troubleshooting forPower Transmission Products . . . . . . . . . . . . . . . . . . . . . . . . P. 58 - 59

Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 60

Global Factories & Sales Offices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 61

Application Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 2 & 3Lineup of Belts and Related Products . . . . . . . . . . . . . . . . . . . . . .P. 4 & 5Industrial Power Transmission Products Selection Chart . . . . . .P. 6 & 7Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 8

I Synchronous Power TransmissionRound Tooth Timing Belt

Belt Type, Dimensions & Product Code . . . . . . . . . . . . . P. 10Super Torque® Timing Belt G . . . . . . . . . . . . . . . . . . P. 11 & 12Super Torque® Timing Belt G . . . . . . . . . . . . . . . . . . . . . . P. 13Super Torque® Timing Pulley . . . . . . . . . . . . . . . . . . . . . . P. 14Mega Torque® Timing Belt G & u . . . . . . . . . . . . . . P. 15 & 16H Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 17

Trapezoidal Tooth Timing BeltBelt Type, Dimensions & Product Code . . . . . . . . . . . . . P. 18Timing Belt G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 19 - 21Timing Belt u . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 22 & 23Timing Pulley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 24 & 25green eco® Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 26

Other type of Timing BeltsLONG-SPAN Timing Belt . . . . . . . . . . . . . . . . . . . . . . . . . . P. 27 FREESPAN® Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 28

II Frictional Forced Power TransmissionConventional V-Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 30Triplex® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 31 & 32Conventional Banded . . . . . . . . . . . . . . . . . . . . . . . . .P. 33 & 34Triplex® Rawedge Cogged Banded . . . . . . . . . . . . . . . . . .P. 35Maxstar Wedge Supreme® V-Belt . . . . . . . . . . . . . . . . . . . . P. 36Maxstar Wedge® Narrow Banded . . . . . . . . . . . . . . . P. 37 & 38Multi Super Wedge II . . . . . . . . . . . . . . . . . . . . . . . . . .P. 39 & 40Maxstar Wedge Supreme® Narrow Cogged Banded . . . P. 41FHP V-Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 42MBL Super KB® Premium FHP Belt . . . . . . . . . . . . . . . . . P. 43Narrow V-Belt for DIN 7753/ISO4184 . . . . . . . . . . . . . . . . . P. 44

Double Angle Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 45Ribstar® Belt G (Rubber V-Ribbed Belt) . . . . . . . . . . . . . . P. 46Super VS® Belt (Variable Speed Belt) . . . . . . . . . . . . . . . . P. 47FLEXSTAR® Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 48SuPER FLEXSTAR® Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 49POLYMAX Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 50MB Belt® (Polyurehene V-Belt) . . . . . . . . . . . . . . . . . . . . . . P. 51STARROPE®, SuPER STARROPE®

PRENE V-ROPE, PRENE HEXAGONAL-ROPE . . . . . . . . P. 52FLAT Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 53FLEXSTAR® Belt J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 54

III Direct Power Connected TransmissionChemi-Chan® (High PerformanceMiniature Coupling) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 56

HYPERFLEX® Coupling (MT-MH) . . . . . . . . . . . . . . . . . . .P. 57

IV Troubleshooting for Power Transmission Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 58 - 59

1

Polisher (Super Torque Timing Belt)

Large Knitting Machine (Super Torque Timing Belt)

Copier (Rubber Timing Belt)

Heavy Duty Polisher (Maxstar Wedge V-Belt)

Combine (V-Belt for Agricultural Machines) Food Processor (Ribstar Belt)2

Marine Engine (TSCHAN® Coupling S)

Packaging Machine (Polyurethane Double Timing Belt)

Plastic Card Vender (Polyurethane Timing Belt)

Actuator (Chemi-Chan®)

Dryer (V-Belt)

NC Lathe (Ribs Belt)

NC Lathe (Multi-POLYMAX Belt)

* To show the application examples clearly, safety covers are removed in thepictures on this page.Always put on the safety covers when in use.

3

Super Torque® Timing Belt(General use: Rubber)

Mega Torque® Timing Belt G&U(Heavy-duty use)

Timing Belt G(General use: Rubber)

Timing Belt U(General use: Polyurethane)

green eco® Series

LONG-SPAN Timing Belt(Endless & Open End)

Timing Pulley

Chemi-Chan®

(High PerformanceMiniature Coupling)

HYPERFLEX® Coupling (MT-MH)

Conventional V Belt(General use: Rubber)

Conventional Banded

FHP V-Belt

MBL Super KB®

Premium FHP Belt

Maxstar Wedge Supreme®

V-Belt

Maxstar Wedge®

Narrow Banded

Multi Super Wedge II

Perforated V-Rope

V-Belt with Lugs(Agricultural use)

Double Angle Belt

4

Page 11

Page 15

Page 19

Page 22

Page 26

Page 27

Page 24

Page 56

Page 57

Page 30

Page 33

Page 42

Page 43

Page 36

Page 37

Page 45

Triplex®

Rawedge CoggedV-Belt

SUPER GOLD 1000Raw Edge Cogged V-Belt(Agricultural use)

Raw Edge MULTI-PLY V-Belt(Automotive use)

Raw Edge Cogged V-Belt(Automotive use)

Super VS® Belt(Variable Speed Belt)

e-POWER® Belt(Cogged type)

MB BUSHING

SLEEVE ROLL

Flat Belt(General use)

Flat Belt(For Lifter)

FLEXSTAR® Belt J(For Conveyor)

SUPER FLEXSTAR®

(Heavy-duty use)

FLEXSTAR®

PRENE V-ROPE & HEXAGONAL-ROPE (Polyurethane Rope)

MB Belt(For Sewing Machine)

POLYMAX Belt(Wide-angle Polyurethane V-Belt)

Ribstar® Belt G(Rubber)

STARROPE® & SUPER STARROPE®

(Polyurethane Round Rope)

Page 47

Page 46

Page 50

Page 51

Page 52

Page 52

Page 48

Page 49

Page 54

Page 53

5

Page 31

How much slipcan you allow?

How do youwant to use it?

What featuresdo you need?

SlipTolerance

DriveClassification Applications

Type of Belt/Pulley

Tooth Shape or FormMaterial Features

Mitsuboshi Products Lineup for Power Transmission Belts

Product Name Type

TimingBelt

Some slipis allowed.

Note: Takeslip ratioasapprox.1%

DirectConnectedPowerTransmission

Synchrono

us Pow

er Transmission

No slipallowed

Friction Fo

rced

Transmission

V-Belt

FlatBelt

Thin FlatBelt

V-RibbedBelt

RoundBelt(SquareBelt)

SpecialBelt

Dire

ct C

onne

ctPow

er Trans

mission

Coupling

General use, Office &Home appliances,agricultural use

Office appliance, precision machinery

Agricultural use (for straw conveyor)

Agricultural use (for vegetable harvestor)

General Industries

General Industries,agricultural machinery

Office & Home appliance, general use

Automotive use

Office & Homeappliance, general use

ATM, ticket vendingmachine

FA (for elevating machine)

Press

General use

Elevating machine (agricultural use)

General use,agricultural use

Home appliances,agricultural use, general use

Motorcycle, general use

Automotive use

Home appliance,agricultural use

General use

Agricultural use

Office & Home appliances,General us(based on ISDO standard)

Heavy-duty agricultural use

Office & Home appliances

General use (for motor drive)

Automotive use (for engine drive)

General use

Printer

General use

Automotive use (for engine only)

General use

Printer

Office & Home appliances

General use

General use

General use

General use

Home appliances

Printer

Rubber

Thermo-settingpolyurethane

Thermo-plasticpolyurethane

Rubber

Thermo-settingpolyurethane

Rubber

Polyurethane

Rubber

Polyurethane

Rubber

MillablePolyurethane

Rubber

Aluminum

Cast Iron

Aluminum

Steel

Rubber

Rubber

Polyurethane

Rubber

Round tooth

Less thickness

Trapezoidal tooth

Round tooth

Standard

Less thickness

Notched type

Trapezoidal tooth

Round tooth

Trapezoidal tooth

Cord core flat type

Cord core flat

Flat belt with V rail

No cord and canvas flat type

Laminated flat type

Cut edge

Round edge

Cogged type

Wide-angle

Wrapped (Variable speed)

Raw Edge Cogged(Variable speed)

Wide-angle cogged

Cogged

Multi-ply

Plain

Flat

Standard

Narrow widthtype

Standard type

Less thicknesstype

Flexible, DirectConnected PowerTransmission

Standard type

Sponge backing type

Hexagonal rope

Rib

Hexagonal

Standard perforated V rope

Round rope

V rope

High power transmission,heat resistance, water resistance,flex fatigue resistance

Multi-pulley, double-sided drive

Long-span drive

Synchronous transportation

SUPER TORQUE GN

SUPER TORQUE G

SUPER TORQUE GA

SUPER TORQUE G Double Timing

SUPER TORQUE G Open-End

SUPER TORQUE G Endless

STARMAX® G

green eco® Series

MEGA TORQUE G

TIMING BELT G

TIMING BELT GA

TIMING BELT G Double Timing

TIMING BELT G Open-end

TIMING BELT G Endless

green eco® Series

STARMAX® G

SUPER TORQUE U

SUPER TORQUE U Open-End

MEGA TORQUE U

TIMING BELT U

STARMAX® U

STARMAX® U

TIMING BELT U Open-end

TIMING BELT U Double Timing

FREESPAN® Belt

FHP

Conventional V-Belt

Red label V-Belt

e-POWER®

MAXSTAR WEDGE V

Banded MAXSTAR WEDGE V-Belt

Conventional V-Belt

Orange label L type

Gold Label L type

SUPER GOLD 1000

AG SERIES

Orange label Raw Edge COGGED

SUPER GOLD 1000 Raw Edge COGGED

e-POWER®

TRIPEX® Rawedge Cogged V-Belt

TRIPEX® Rawedge Cogged Banded

MAXSTAR EDGE SUPREME®

Banded MAXSTAR WEDGE SUPREME®

Banded MAXSTAR WEDGESUPREME BACK-V

REMF®

MPMF®

RECMF®

WFC®

RCVS, SUPER VS®

DCVS®

AGVS®

POLYMAX

Banded POLYMAX

MB Belt

PORT®, HARBOUR®, SPECIAL PORT®

ECHO®, PIONEER®

DRY FLEX®

FLEXSTAR®

SUPER FLEXSTAR®

FREESPAN® Flat Belt

FLEX STAR® Belt J

RIBSTAR G (Bare-back type)

RIBSTAR U

RIBSTAR U

Double Angle V-Belt

Perforated V-Belt

STARROPE®

SUPER STARROPE®

PRENE V-ROPE

PREVE HEXAGONAL-ROPE

Sponge backing V-Belt

V-Belt with lugs

NOR-MEX®

S Series

HYPERFLEX®

Chemi-chan®

Accurate positioning

Ozone resistance

Low-speed, high-torque use

Heat resistance

Long-span drive


Synchronous Power transmission


Ozone resistance


Clean drive

Long-span drive

Low-speed, high-torque use



Clean drive


Long-span drive

Long-span drive


General use

General use

High power transmission

Light-duty use, compact design

Heavy-duty use, compact design

Anti-vibration

Flex resistance

High resistance, flex resistance

High resistance, flex resistance

RawEdgeCogged

RawEdge

Heat resistance, flex resistance, anti-vibration

Heat resistance, flex resistance, anti-vibration


Low contraction

Energy-Saving


Rubber dust free,belt clutch

Abrasion resistance

Low noise

Abrasion resistance, flex assistance

Especially for small diesel automotives

Lateral pressure resistance



Light-duty, clean drive

Lateral pressure, high power transmission

High-speed revolution, compact design

Processed jointGood flex resistance

Less stretch and runout

High tensile force

High-speed drive, compact design

Less stretch

Good driving stability,compact design,maintenance-free

Flex resistance, high powertransmission, high-speed revolution

Flex resistance, high-speed revolution


Adjustable belt length

Light-duty use

Adjustable belt length, processing joint

Sponge backing

Back protrusion for straw conveying

Shock absoption, anti-vibration

Good attenuation performance

S2M • S3M • S5M

S8M • S14M

S8M • FS9.525M • MY • MR • S5M • XY • XR

DS3M • DS5M • DS8M • DS14M

S2M • S3M • S5M • S8M • S14M

S8M • S14M

ST1.5 • ST55 • ST64 • ST80 • ST83 • ST2.0 • ST111

S2M • S3M• ST1.0 • ST1.5 • ST2.0 • ST55 • ST80 • ST83 • ST111

MTS5M • MTS8M • MTS14M

MXL • XXL • XL • L • H • XH • XXH

ZA • ZAS • ZB • ZBS

DMXL • DXL • DL • DH

MXL • XL • L • H

L • H • XH • XXH

MXL • XL

T80 • T83 • T111

S2M • S3M

S2M • S3M

MTS8M

ST83 • ST111

T80 • T83 • T111

T80 • T5 • T10 • XL • L

DT5 • DT10

T80 • XL • L

S5M • S8M

T5 • T10 • AT5 • AT10 • XL • L • H

3L • 4L • 5L

K • M • A • B • C • D • E

A • B • C

3V • 5V • 8V

R3V • R5V • R8V

LA • LB • LC

LA • LB • LC

AX • BX • CX

AX • BX • CX

RBX • RCX

3VX • 5VX

R3VX • R5VX

M • A • B • C

LA • LB • LC

HM • A • B • BC

HM • A • B

HM • A • B • BC • C • CD

A • B

Top width 10 mm - 120 mm

Top width 20 mm - 120 mm

HI • HJ • HK • HL • HM • HN

3M• 5M • 7M • 11M

R5M • R7M • R11M

MB

P • H • SP

EC • P

AA • O • OW • TN

FL • FM • FH • FLEG • FLG • FLE• FMG • FHG

FU • FWQ • FY

F20 • F20D

J8GA • J8GE • J8H • J8HB • J6H• J6HB • J3H • J3HB

JL • JLB• JL3

JN • J2N

JU • JLU2 • JLU5 • JLU6

YG

HB

J • PK • L

PK

HB • JT • JBT • J

AA • BB • CC

M • A • B • C

M • A • B

AA • BB

LA • LB • LC

A • B • C

G • FG • LG • E • FE • LE

S • SV • SX •SZ

MT • MH

HAS6

• Selecting Power Transmission Belts and Related ProductsA wide range of products are available at Mitsuboshi to suit your needs.Refer to the following property chart when selecting belts

Excellent . . . . . . . . . . . . . . . . . . . . . . . . .Good . . . . . . . . . . . . . . . . . . . . . . . . . . . .No signCaution needed when in use . . . . . . . . .Not suitable . . . . . . . . . . . . . . . . . . . . . .

Highpower-

transmission

Compact-design

FlexibilityHigh-Speeddrive

Multi-Pulley

Jointprocessing

Smoothoperation

Continuousspeedchange

Back sidedrive

Back sidetension

AlignmentFrequentstart &stop

Heatresistance

Coldresistance

Waterresistance

Oilresistance

Acidresistance

Alkallresistance

Ozoneresistance

Weatherresistance Noise Vibration

7

8

DimensionsModel Material Type Cross-Sectional Dimensions Minimum Pulley Diameter Highest Speed

top width (mm) x thickness (mm) x angle (O) (mm) (m/sec)

SUPER TORQUE Timing Belt Rubber S2M Pitch (mm) 2.00 9 30 (40)(Round tooth) S3M 3.00 13 30 (40)

S5M 5.00 22 30 (40)S8M 8.00 56 30 (40)S14M 14.00 151 30 (40)

Polyurethane S2M 2.00 9 30 (40)S3M 3.00 13 30 (40)

MEGA TORQUE Timing Belt Rubber MTS5M Pitch (mm) 5.00 22 30MTS8M 8.00 56 30MTS14M 14.00 151 30

Timing Belt MXL Pitch (mm) 2.032 7 30 (40)(Trapezoidal tooth) XL 5.08 16 30 (40)

Rubber L 9.525 30 30 (40)H 12.700 57 30 (40)XH 22.225 127 30 (40)XXH 31.750 182 30 (40)

T80 Pitch (mm) 2.032 7 30 (40)T5 • DT5 5.0 19 30 (40)

Polyurethane T10 • DT10 10.0 45 30 (40)XL 5.08 16 30 (40)L 9.525 30 30 (40)

Conventional V-Belt A 12.5x 9.0x 40 95 (67) 30B 16.5x 11.0x 40 150 (118) 30

Rubber C 22.0x 14.0x 40 224 (180) 30D 31.5x 10.0x 40 355 (300) 30E 38.0x 25.5x 40 560 (450) 30

MAXSTAR WEDGE V-BELT 3V 9.5X 8.0X 40 67 40Rubber 5V 15.9X 13.5X 40 180 40

8V 25.4x 22.0x 40 315 40

Banded MAXSTAR WEDGE V-Belt 3V 67 40(Joined V-Belt) Rubber 5V 180 40

8V 315 40

RIBSTAR Belt J Pitch (mm) 2.34 31.5 (25) 40 (50)(V-Ribbed Belt) Rubber PK 3.56 56 (50) 40 (50)

L 4.70 90 (80) 40 (50)

Polyurethane JT • JBT Pitch (mm) 2.34 20 30 (35)

FLEXSTAR® Belt FL Belt Thickness (mm) 1.5 16 40 (60)Rubber FM 2.5 40 40 (60)

FH 3.5 80 40 (60)POLYMAX Belt 3M 3.0x 2.0x 60 17 40

Polyurethane 5M 5.0x 3.0x 60 26 407M 7.0x 3.0x 60 42 4011M 11.0x 7.0x 60 67 40

MB Belt (Polyurethane V-Belt) Polyurethane MB 6.0x 4.0x 40 16 10

STARROPE®/SUPER STARROPE® 2 Diameter omm 2 15/ 20 super 10 and below3 3 20/ 30 104 4 30/ 40 105 5 40/ 50 106 6 50/ 60 10

Polyurethane 7 7 60/ 70 108 8 70/ 80 109 9 85/ 90 1010 10 95/ 100 1012 12 120/ 120 1015 15 150/ 150 10

PRENE V-ROPE Polyurethane M 10.0x 5.5x 40 40 10 and belowA 12.5x 8.5x 40 85 10B 16.5 x 10.5x 40 100 10

PRENE HEXAGONAL-ROPE Polyurethane AA 12.5x 10.0x 40 100 10 and belowBB 16.5x 12.5x 40 130 10

I Synchronous PowerTransmission

Round Tooth Timing BeltBelt Type, Dimensions & Product Code . . . . . . P. 10Super Torque® Timing Belt G . . . . . . . . . . P. 11 & 12Super Torque® Timing Belt G . . . . . . . . . . . . . . P. 13Super Torque® Timing Pulley . . . . . . . . . . . . . . P. 14Mega Torque® Timing Belt G & u . . . . . . . P. 15 & 16H Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 17

Trapezoidal Tooth Timing BeltBelt Type, Dimensions & Product Code . . . . . . P. 18Timing Belt G . . . . . . . . . . . . . . . . . . . . . . . P. 19 - 21Timing Belt u . . . . . . . . . . . . . . . . . . . . . . . P. 22 & 23Timing Pulley . . . . . . . . . . . . . . . . . . . . . . . P. 24 & 25green eco® Series . . . . . . . . . . . . . . . . . . . . . . . P. 26

Other Timing BeltLONG-SPAN Timing Belt . . . . . . . . . . . . . . . . . . P. 27FREESPAN® Belt . . . . . . . . . . . . . . . . . . . . . . . . . P. 28

9

Belt Type, Dimensions & Product Code

Belt Type Standard Dimensions Product Code ApplicationsStandard WidthCode Width

Miniumum Pulley Size *1Pulley diameter (mm) No. of teeth

S2M

S3M

S5M

S8M

S14M

4060

100

60100150

100150250

150250300400600

40060080010001200

8.91

13.37

22.28

56.02

151.52

4mm6mm

10mm

6mm10mm15mm

10mm15mm25mm

15mm25mm30mm40mm60mm

40mm60mm80mm100mm120mm

14

14

14

22

34

• OA Equipment • Automatic VendingMachine

Facsimile Ticketing machine

Printer Ticket gate

Typewriter ATM

Word Processor Note counter

Cash Register Money changingmachine

X-Y plotter

• Electronic • InstrumentationApplications

Rotary machine

Computer Recorder

VTR Oscillograph

Fish sonar finder Data processingsystem

Flaw-detecting Various testmachines

Depth finder

Robot

• Home Appliances • OthersBlender Toys

Mixer Medical systems

Sewing machine Health equipment

Vacuum cleaner

Electrical tools

• Woodworking • Machine toolsmachinery Drilling machine, lathe

• Textile machinery Screw cutting machineTextile spinning Boring machinemachine Grinding machineYarn twisting machine Milling machine

• Paper making NC lathemachinery • PrinterMixerDryerCalender

• Fan/Blower

• Blower • Screen• Mill hammerBallRodPebble

• Paper makingmachineryMixerDryerCalender

Belt Tooth Pitch 14mm





Pitch Line

Pitch Line

Pitch Line

Pitch Line

Belt

Belt Width(mm)x10

Belt Type

Nominal Length(mm)

G (rubber)Type

U(polyurethane)Type

Belt

Belt Width(mm)x10

Belt Type

Nominal Length(mm)

G (rubber)Type

U(polyurethane)Type

*In case ofdouble timingbelt, use DS3M

Belt

Belt Width(mm)x10

Belt Type

Nominal Length(mm)

G (rubber)Type

* In case ofdouble timingbelt, use DS5M

Belt Width(mm)x10

Belt Type

NominalLength(mm)

G (rubber)Type

* In case ofdouble timingbelt, use DS8M

Belt Width(mm)x10

Belt Type

NominalLength(mm)

G (rubber)Type

* In case ofdouble timing

belt, use DS14M

10

Round Tooth Timing BeltRound Tooth Timing Belt

11

Super Torque® Timing Belt GSince the round tooth shape allows smooth meshing with pulleys, thisbelt is the most suitable for applications which requires high accuracy andsmooth revolution such as computers and office appliances.• Improved flexibility of this belt enables use of smaller diameter pulleys• Smooth meshing allows noiseless operation• Usable with low shaft load• Possible to transmit high torque with a small belt

Standard Belt Sizes

Belt Type S2MTooth Pitch 2.0(mm)Code (width) 40 (4mm) 60(6mm) 100(10mm)

Product Code No. of Belt Pitch Product Code No. of Belt PitchTeeth Length (mm) G U Teeth Length (mm) G U

B S2M 66 33 66 B S2M 302 151 302B S2M 72 36 72 B S2M 304 152 304B S2M 74 37 74 B S2M 306 153 306B S2M 76 38 76 B S2M 308 154 308B S2M 78 39 78 B S2M 310 155 310B S2M 80 40 80 B S2M 312 156 312B S2M 84 42 84 B S2M 314 157 314B S2M 86 43 86 B S2M 316 158 316B S2M 88 44 88 B S2M 318 159 318B S2M 90 45 90 B S2M 320 160 320







B S2M 220 110 220 B S2M 672 336 672B S2M 224 112 224 B S2M 676 338 676B S2M 226 113 226 B S2M 694 347 694B S2M 230 115 230 B S2M 710 355 710B S2M 232 116 232 B S2M 726 363 726B S2M 234 117 234 B S2M 740 370 740B S2M 236 118 236 B S2M 752 376 752B S2M 238 119 238 B S2M 796 398 796B S2M 240 120 240 B S2M 800 400 800B S2M 242 121 242 B S2M 810 405 810B S2M 244 122 244

B S2M 246 123 246B S2M 248 124 248B S2M 250 125 250B S2M 252 126 252B S2M 254 127 254B S2M 256 128 256B S2M 258 129 258B S2M 260 130 260B S2M 262 131 262B S2M 264 132 264

B S2M 266 133 266B S2M 268 134 268B S2M 270 135 270B S2M 272 136 272B S2M 274 137 274B S2M 276 138 276B S2M 278 139 278B S2M 280 140 280B S2M 284 142 284B S2M 286 143 286B S2M 288 144 288B S2M 290 145 290B S2M 292 146 292B S2M 296 148 296B S2M 300 150 300

Manufacturable Size Manufacturable Size

B S2M 822 411 822B S2M 826 413 826B S2M 848 424 848B S2M 856 428 856B S2M 862 431 862B S2M 866 433 866B S2M 880 440 880B S2M 882 441 882B S2M 900 450 900B S2M 910 455 910B S2M 930 465 930B S2M 944 472 944B S2M 976 488 976B S2M 984 492 984B S2M 1016 508 1.016B S2M 1062 531 1.062B S2M 1066 533 1.066B S2M 1100 550 1.100B S2M 1136 568 1.136B S2M 1140 570 1.140

B S2M 1196 598 1.196B S2M 1224 612 1.224B S2M 1250 625 1.250B S2M 1274 637 1.274B S2M 1290 645 1.290B S2M 1420 710 1.420B S2M 1524 762 1.524

Super Torque® Timing Belt G

• For S2M and S3M, polyurethane (U) and rubber (G) models are available. Choose the appropriate material for your application.• (D) signifies the standard size of double timing belt G (rubber) type.• Sizes not indicated above are also available under limited conditions.

Size

12











Product Code No. of Belt Pitch Product Code No. of Belt Pitch Product Code No. of Belt PitchTeeth Length (mm) G U Teeth Length (mm) G U Teeth Length (mm)

Belt Type S3M S5MTooth Pitch 3.0(mm) 5.0(mm)Code (width) 60(6mm) 100(10mm) 150 (15mm) 100 (10mm) 150(15mm) 250(25mm)

Super Torque® Timing Belt GSuper Torque® Timing Belt G

(D)(D)(D)(D)(D)

(D)

(D)(D)(D)(D)(D)

(D)(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)







B S3M 825 275 825B S3M 831 277 831B S3M 837 279 837B S3M 852 284 852B S3M 858 286 858B S3M 882 294 882B S3M 888 296 888B S3M 894 298 894B S3M 900 300 900B S3M 909 303 909B S3M 918 306 918

B S3M 927 309 927B S3M 954 318 954B S3M 999 333 999B S3M 1005 335 1,005B S3M 1014 338 1,014B S3M 1035 345 1,035B S3M 1050 350 1,050B S3M 1080 360 1,080B S3M 1119 373 1,119B S3M 1170 390 1,170

B S3M 1203 401 1,203B S3M 1221 407 1,221B S3M 1236 412 1,236B S3M 1245 415 1,245B S3M 1260 420 1,260B S3M 1290 430 1,290B S3M 1299 433 1,299B S3M 1326 442 1,326B S3M 1332 444 1,332B S3M 1401 467 1,401B S3M 1419 473 1,419B S3M 1521 507 1,521B S3M 1560 520 1,560B S3M 1572 524 1,572

B S3M 1596 532 1,596B S3M 1680 560 1,680B S3M 1788 596 1,788B S3M 2100 700 2,100B S3M 2115 705 2,115

(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)

(D)

(D)(D)(D)(D)(D)

(D)(D)(D)

(D)(D)(D)(D)(D)(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)

(D)(D)(D)(D)(D)







B S5M 930 186 930B S5M 950 190 950B S5M 975 195 975B S5M 1000 200 1,000B S5M 1025 205 1,025B S5M 1050 210 1,050B S5M 1055 211 1,055B S5M 1085 217 1,085B S5M 1090 218 1,090B S5M 1100 220 1,100

B S5M 1105 221 1,105B S5M 1115 223 1,115B S5M 1120 224 1,120B S5M 1125 225 1,125B S5M 1135 227 1,135B S5M 1145 229 1,145B S5M 1160 232 1,160B S5M 1165 233 1,165B S5M 1195 239 1,195B S5M 1225 245 1,225

B S5M 1250 250 1,250B S5M 1270 254 1,270B S5M 1295 259 1,295B S5M 1350 270 1,350B S5M 1420 284 1,420B S5M 1475 295 1,475B S5M 1500 300 1,500B S5M 1505 301 1,505B S5M 1530 306 1,530B S5M 1595 319 1,595

B S5M 1605 321 1,605B S5M 1680 336 1,680B S5M 1715 343 1,715B S5M 1800 360 1,800B S5M 2000 400 2,000B S5M 2145 429 2,145B S5M 2255 451 2,255B S5M 2480 496 2,480B S5M 2525 505 2,525

(D)(D)(D)(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)(D)(D)(D)(D)(D)

(D)(D)(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)(D)(D)(D)(D)(D)(D)(D)(D)(D)

(D)(D)(D)(D)(D)(D)(D)

(D)

Manufacturable Size Manufacturable Size

• For S2M and S3M, polyurethane (U) and rubber (G) models are available. Choose the appropriate material for your application.• (D) signifies the standard size of double timing belt G (rubber) type.• Sizes not indicated above are also available under limited conditions.

Size

13

Belt Type S8M S14MTooth Pitch 8.0(mm) 14.0(mm)

Code (width) 150(15mm) 250(25mm) 300(30mm) 400(40mm) 400(40mm) 600(60mm) 1000(100mm) 1200(120mm)

B S8M 376 47 376B S8M 400 50 400B S8M 440 55 440

(D) B S8M 480 60 480(D) B S8M 496 62 496(D) B S8M 512 64 512(D) B S8M 520 65 520(D) B S8M 528 66 528(D) B S8M 560 70 560(D) B S8M 584 73 584

(D) B S8M 600 75 600(D) B S8M 632 79 632(D) B S8M 640 80 640(D) B S8M 656 82 656(D) B S8M 680 85 680(D) B S8M 712 89 712(D) B S8M 720 90 720(D) B S8M 760 95 760(D) B S8M 800 100 800(D) B S8M 824 103 824

(D) B S8M 840 105 840(D) B S8M 848 106 848(D) B S8M 856 107 856(D) B S8M 880 110 880(D) B S8M 896 112 896(D) B S8M 912 114 912(D) B S8M 920 115 920(D) B S8M 928 116 928(D) B S8M 944 118 944(D) B S8M 952 119 952

(D) B S8M 960 120 960(D) B S8M 976 122 976(D) B S8M 1000 125 1,000(D) B S8M 1024 128 1,024(D) B S8M 1040 130 1,040(D) B S8M 1056 132 1,056(D) B S8M 1080 135 1,080(D) B S8M 1120 140 1,120(D) B S8M 1128 141 1,128(D) B S8M 1136 142 1,136

(D) B S8M 1152 144 1,152(D) B S8M 1160 145 1,160

B S8M 1184 148 1,184(D) B S8M 1200 150 1,200(D) B S8M 1216 152 1,216(D) B S8M 1248 156 1,248(D) B S8M 1256 157 1,256(D) B S8M 1280 160 1,280(D) B S8M 1296 162 1,296(D) B S8M 1304 163 1,304

(D) B S8M 1312 164 1,312(D) B S8M 1320 165 1,320(D) B S8M 1352 169 1,352(D) B S8M 1360 170 1,360(D) B S8M 1384 173 1,384(D) B S8M 1400 175 1,400(D) B S8M 1424 178 1,424(D) B S8M 1440 180 1,440(D) B S8M 1480 185 1,480(D) B S8M 1488 186 1,488




(D) B S8M 2800 350 2,800(D) B S8M 2920 365 2,920(D) B S8M 2944 368 2,944(D) B S8M 3048 381 3,048(D) B S8M 3200 400 3,200(D) B S8M 3272 409 3,272(D) B S8M 3440 430 3,440(D) B S8M 3680 460 3,680(D) B S8M 4400 550 4,400

Super Torque® Timing Belt GSuper Torque® Timing Belt G

Product Code No. of Teeth Pitch Length (mm) Product Code No. of Teeth Pitch Length (mm)

B S14M 1008 72 1,008B S14M 1120 80 1,120B S14M 1190 85 1,190

(D) B S14M 1246 89 1,246(D) B S14M 1288 92 1,288(D) B S14M 1400 100 1,400(D) B S14M 1540 110 1,540(D) B S14M 1610 115 1,610(D) B S14M 1652 118 1,652(D) B S14M 1708 122 1,708



(D) B S14M 4004 286 4,004(D) B S14M 4508 322 4,508(D) B S14M 5012 358 5,012

Size

• Keep in mind that not all the sizes in above chart are in-stock items.• (D) signifies the standard size of double timing belt G (rubber) type.

Standard Belt Sizes

Since this round tooth belt has a high power transmissionproperty, it expands existing applications of timing belts significantly.Also, it can be used as an alternative for chains and gears.

• A high power transmission property usable in a wide variety of applications• Longer operating life• Quiet operation• Cost-effective

Timing belt power transmission system works the best whenbelt and pulley smoothly mesh with each other.Our SuPER TORQuE Timing Pulley is made with speciallyformed tooth shape and fine finishing.

Super Torque® Timing PulleySuper Torque® Timing Pulley

SuPER TORQuE Standard Pulley Types and Sizes

Pulley Product Code Example:

We add aluminum as a standard pulley for S3M and S5MBelt Type S2M S3M S5M

No. of Teeth Product Code PD OD Product Code PD OD Product Code PD OD

14 P 14S2M 8.91 8.40 P 14S3M 13.37 12.61 P 14S5M 22.28 21.3215 P 15S2M 9.55 9.40 P 15S3M 14.32 13.56 P 15S5M 23.87 22.9116 P 16S2M 10.91 9.68 P 16S3M 15.28 14.52 P 16S5M 25.46 24.5018 P 18S2M 11.46 10.95 P 18S3M 17.19 16.43 P 18S5M 28.65 27.6920 P 20S2M 12.73 12.22 P 20S3M 19.10 18.34 P 20S5M 31.83 30.87



48 P 48S2M 30.56 30.05 P 48S3M 45.84 45.07 P 48S5M 76.39 75.4350 P 50S2M 31.83 31.32 P 50S3M 47.75 46.98 P 50S5M 79.58 78.6260 P 60S2M 38.20 37.69 P 60S3M 57.30 56.53 P 60S5M 95.49 94.53

Standard Sizes MaterialsType 10mm 15mm 25mm Rod Shape Type A•B C Rod ShapeS2MS3M A • B • C A • B • CS5M A • B A • B A • B

S2M AluminumS3M Aluminum Aluminum AluminumS5M Aluminum/Steel Steel

• Shape is a 100mm long round cylinder product.• 22 teeth and below sizes of S3M are available only in rod shape and C type. Also, 24 teeth andabove sizes are available only in A or B type.

• Only steel one is available for 25mm width S5M type.• Flange is not sold separately as a single item.

Belt Type S8M S14M

No. of Product PD OD A/B Type W TypeTeeth Code Standard Width Standard Width

No. of Product PD OD A/B Type B Type W TypeTeeth Code Standard Width Standard Width Standard Width

18 P18S8M 45.84 44.4619 P19S8M 48.38 47.0120 P20S8M 50.93 49.5621 P21S8M 53.48 52.1022 P22S8M 56.02 54.6524 P24S8M 61.12 59.7425 P25S8M 63.66 62.2926 P26S8M 66.21 64.8428 P28S8M 71.30 69.9330 P30S8M 76.39 75.0232 P32S8M 81.49 80.1234 P34S8M 86.58 85.2136 P36S8M 91.67 90.3038 P38S8M 96.77 95.3940 P40S8M 101.86 100.4944 P44S8M 112.05 110.6748 P48S8M 122.23 120.8650 P50S8M 127.32 125.9560 P60S8M 152.79 151.4272 P72S8M 183.35 181.9784 P84S8M 213.90 212.5396 P96S8M 244.46 243.09

120 P120S8M 305.58 304.21

15 • 25 •30 • 40

15 • 25 •30 • 40 • 60

15 • 25 • 40 • 60

25 • 40 • 60

40 • 60 • 80 40 • 60

40 • 60

28 P28S14M 124.78 121.9830 P30S14M 133.69 130.9032 P32S14M 142.60 139.8134 P34S14M 151.52 148.7236 P36S14M 160.43 157.6340 P40S14M 178.25 175.4642 P42S14M 187.17 184.3744 P44S14M 196.08 193.2948 P48S14M 213.90 211.1150 P50S14M 222.82 220.0256 P56S14M 249.55 246.76(60) P60S14M 267.38 264.59(64) P64S14M 285.21 282.41(72) P72S14M 320.86 318.06

• No of teeth in ( ) is nonstock item.• Flange is not sold separately as a single item.• A and B types are made from steel whereas W type is made from cast metal.

We revised the standard item lists in April, 2006.

Pulley Types

14

Size

Size

Dimensions- Tooth Shape & Product Code -

Characteristics of low/high speed torque timing belt‘MEGA TORQuE’:1. Large transmission capacity is achievable, at about 2 times that

of SuPER TORQuE G (Rubber)(variation subject to pulley diameter and revolution speed).

2. Compact design possible.Compared to SuPER TORQuE G (Rubber), width is approximately 40%smaller on average for the same pulley diameter.

3. Pulley of existing models can be used.SuPER TORQuE (S8M, S14M) pulleys can be used as per usual.- Please contact us regarding pulley for MTS5M.

Mega Torque®Timing Belt G&uMega Torque® Timing Belt G&u

MEGA TORQuE Timing Belt G Standard Belt Sizes

• MTS5M

• MTS8M

• MTS14M

Standard Belt WidthBelt Width Code Belt Width (mm)

100 10

150 15

250 25


150 15

250 25

300 30

400 40

600 60


400 40

600 60

800 80

1000 100

1200 120

MTS5M (Pitch 5mm)Product Code No. of teeth Product Code No. of teeth

MTS5M 225 45 MTS5M 765 153MTS5M 230 46 MTS5M 780 156MTS5M 255 51 MTS5M 800 160MTS5M 260 52 MTS5M 810 162MTS5M 295 59 MTS5M 830 166MTS5M 300 60 MTS5M 845 169MTS5M 305 61 MTS5M 850 170MTS5M 320 64 MTS5M 870 174MTS5M 325 65 MTS5M 890 178MTS5M 340 68 MTS5M 900 180MTS5M 350 70 MTS5M 950 190MTS5M 360 72 MTS5M 1000 200MTS5M 380 76 MTS5M 1025 205MTS5M 390 78 MTS5M 1050 210MTS5M 400 80 MTS5M 1055 211MTS5M 425 85 MTS5M 1085 217MTS5M 435 87 MTS5M 1090 218MTS5M 440 88 MTS5M 1100 220MTS5M 450 90 MTS5M 1105 221MTS5M 475 95 MTS5M 1115 223MTS5M 490 98 MTS5M 1120 224MTS5M 500 100 MTS5M 1125 225MTS5M 520 104 MTS5M 1135 227MTS5M 525 105 MTS5M 1145 229MTS5M 530 106 MTS5M 1160 232MTS5M 545 109 MTS5M 1165 233MTS5M 550 110 MTS5M 1195 239MTS5M 560 112 MTS5M 1225 245MTS5M 575 115 MTS5M 1250 250MTS5M 590 118 MTS5M 1270 254MTS5M 595 119 MTS5M 1295 259MTS5M 600 120 MTS5M 1350 270MTS5M 625 125 MTS5M 1420 284MTS5M 640 128 MTS5M 1475 295MTS5M 650 130 MTS5M 1500 300MTS5M 665 133 MTS5M 1505 301MTS5M 670 134 MTS5M 1530 306MTS5M 675 135 MTS5M 1595 319MTS5M 690 138 MTS5M 1605 321MTS5M 695 139 MTS5M 1680 336MTS5M 700 140 MTS5M 1715 343MTS5M 710 142 MTS5M 1800 360MTS5M 720 144 MTS5M 2000 400MTS5M 725 145 MTS5M 2255 451MTS5M 730 146 MTS5M 2480 496MTS5M 740 148 MTS5M 2525 505MTS5M 750 150

15

16

Mega Torque® Timing Belt G&uMega Torque® Timing Belt G&u


150 15

250 25

400 40

600 60

Standard Belt Sizes

MTS8M (Pitch 8mm)Product Code No. of teeth Product Code No. of teeth

MTS8M 528 66 MTS5M 1384 173MTS8M 560 70 MTS5M 1400 175MTS8M 584 73 MTS5M 1424 178MTS8M 600 75 MTS5M 1440 180MTS8M 632 79 MTS5M 1480 185MTS8M 640 80 MTS5M 1488 186MTS8M 656 82 MTS5M 1520 190MTS8M 712 89 MTS5M 1552 194MTS8M 720 90 MTS5M 1600 200MTS8M 760 95 MTS5M 1640 205MTS8M 800 100 MTS5M 1648 206MTS8M 824 103 MTS5M 1680 210MTS8M 840 105 MTS5M 1696 212MTS8M 848 106 MTS5M 1728 216MTS8M 856 107 MTS5M 1760 220MTS8M 880 110 MTS5M 1776 222MTS8M 896 112 MTS5M 1792 224MTS8M 912 114 MTS5M 1800 225MTS8M 920 115 MTS5M 1816 227MTS8M 928 116 MTS5M 1832 229MTS8M 944 118 MTS5M 1880 235MTS8M 952 119 MTS5M 1912 239MTS8M 960 120 MTS5M 1960 245MTS8M 976 122 MTS5M 2000 250

MTS8M 1000 125 MTS5M 2040 255MTS8M 1024 128 MTS5M 2048 256MTS8M 1040 130 MTS5M 2064 258MTS8M 1056 132 MTS5M 2104 263MTS8M 1080 135 MTS5M 2120 265MTS8M 1120 140 MTS5M 2160 270MTS8M 1128 141 MTS5M 2240 280MTS8M 1136 142 MTS5M 2272 284MTS8M 1152 144 MTS5M 2304 288MTS8M 1160 145 MTS5M 2400 300MTS8M 1184 148 MTS5M 2496 312MTS8M 1200 150 MTS5M 2600 325MTS8M 1216 152 MTS5M 2800 350MTS8M 1248 156 MTS5M 2920 365MTS8M 1256 157 MTS5M 2944 368MTS8M 1280 160 MTS5M 3048 381MTS8M 1296 162 MTS5M 3200 400MTS8M 1304 163 MTS5M 3272 409MTS8M 1312 164 MTS5M 3440 430MTS8M 1320 165 MTS5M 3680 460MTS8M 1352 169 MTS5M 4400 550MTS8M 1360 170


Standard Belt Sizes

• MEGA TORQuE Timing Belt u

MTS14M 1008 72MTS14M 1120 80MTS14M 1190 85MTS14M 1246 89MTS14M 1288 92MTS14M 1400 100MTS14M 1470 105MTS14M 1540 110MTS14M 1610 115MTS14M 1652 118MTS14M 1708 122MTS14M 1750 125MTS14M 1778 127MTS14M 1806 129MTS14M 1890 135MTS14M 1932 138MTS14M 2002 143MTS14M 2100 150MTS14M 2198 157MTS14M 2240 160MTS14M 2310 165MTS14M 2380 170MTS14M 2450 175MTS14M 2506 179MTS14M 2590 185MTS14M 2660 190MTS14M 2800 200MTS14M 3150 225MTS14M 3500 250MTS14M 3556 254MTS14M 3850 275MTS14M 4004 286MTS14M 4508 322MTS14M 5012 358

MTS14M (Pitch 14mm)Product Code No. of teeth

MTS8M 560 70MTS8M 600 75MTS8M 640 80MTS8M 680 85MTS8M 720 90MTS8M 760 95*MTS8M 800 100MTS8M 848 106MTS8M 896 112MTS8M 960 120

MTS8M 1000 125MTS8M 1056 132MTS8M 1120 140MTS8M 1200 150MTS8M 1280 160*MTS8M 1328 166MTS8M 1360 170MTS8M 1440 180MTS8M 1520 190MTS8M 1600 200MTS8M 1696 212*MTS8M 1792 224*MTS8M 1888 236

MTS8M (Pitch 8mm)Product Code No. of teeth

• Total thickness of belt sizes with * mark is 4.8mm.

H SeriesH Series


Standard Belt Sizes

Round-shape belt teeth enable the distribution of loadstress uniformly over the entire belt tooth.Since the belt tooth engages with the pulley groovewithout any interference, stress concentration at theroot of the belt tooth can be eliminated.

• High Power Transmission Capacity

Standard Belt WidthBelt Width (mm) 20.0 30.0 50.0 85.0

Belt Width Code 20 30 50 85

Standard Belt WidthBelt Width (mm) 40.0 55.0 85.0 115.0

Belt Width Code 40 55 85 115

• H14M• H8M

The above mentioned shapes and figures are only for reference.

536H8M 67 536

560H8M 70 560

592H8M 74 592

600H8M 75 600

624H8M 78 624

632H8M 79 632

640H8M 80 640

656H8M 82 656

680H8M 85 680

720H8M 90 720

760H8M 95 760

776H8M 97 776

800H8M 100 800

840H8M 105 840

856H8M 107 856

880H8M 110 880

896H8M 112 898

912H8M 114 912

920H8M 115 920

936H8M 117 936

960H8M 120 960

968H8M 121 968

1000H8M 125 1,000

1040H8M 130 1,040

1056H8M 132 1,056

1064H8M 133 1,064

1080H8M 135 1,080

1120H8M 140 1,120

1128H8M 141 1,128

1152H8M 144 1,152

1160H8M 145 1,160

Product Code No. of teeth Belt PitchLength (mm)

H8M H14MProduct Code No. of teeth Belt Pitch

Length (mm)Product Code No. of teeth Belt Pitch

Length (mm)

1200H8M 150 1,200

1224H8M 153 1,224

1248H8M 156 1,248

1280H8M 160 1,280

1304H8M 163 1,304

1320H8M 165 1,320

1360H8M 170 1,360

1392H8M 174 1,392

1400H8M 175 1,400

1424H8M 178 1,424

1432H8M 179 1,432

1440H8M 180 1,440

1480H8M 185 1,480

1520H8M 190 1,520

1600H8M 200 1,600

1680H8M 210 1,680

1696H8M 212 1,696

1728H8M 216 1,728

1760H8M 220 1,760

1800H8M 225 1,800

1896H8M 237 1,896

1904H8M 238 1,904

1936H8M 242 1,936

2000H8M 250 2,000

2080H8M 260 2,080

2104H8M 263 2,104

2160H8M 270 2,160

2240H8M 280 2,240

2272H8M 284 2,272

2400H8M 300 2,400

784H14M 56 784

826H14M 59 826

924H14M 66 924

966H14M 69 966

1148H14M 82 1,148

1190H14M 85 1,190

1344H14M 96 1,344

1400H14M 100 1,400

1456H14M 104 1,456

1512H14M 108 1,512

1540H14M 110 1,540

1568H14M 112 1,568

1610H14M 115 1,610

1638H14M 117 1,638

1652H14M 118 1,652

1680H14M 120 1,680

1736H14M 124 1,736

1778H14M 127 1,778

1890H14M 135 1,890

1932H14M 138 1,932

1946H14M 139 1,946

2002H14M 143 2,002

2100H14M 150 2,100

2198H14M 157 2,198

2310H14M 165 2,310

2450H14M 175 2,450

17

Trapezoidal Tooth Timing BeltTrapezoidal Tooth Timing Belt

Belt Type, Dimensions & Product Code

Belt Type Standard Dimensions Product Code ApplicationsStandard WidthCode Width (mm)

MinimumPulley

Diameter (mm)

MaximumTransmissionPower(kW)

MXL(DMXL)

G

T80

U

XLG • U

(DXL)G

LG • U

(DL)G

H(DH)

G

XH

G

XXH

G

T5(DT5)

U

T10(DT10)

U

• G: Rubber Timing Belt • U: Polyurethane Timing Belt(Note) 1. Maximum transmission power varies depending on belt width and operatiing speed with the same belt.

The values in above table are for your reference. Please use correct values from relevant design catalog when you design.

2. For G (rubber) type, use heat resistance or oil resistance specifications when the belts are used in temperatures (up to 1200 C) or where oil may contaminate the belts.

3 . 24 . 86 . 49 . 512 . 7

3 . 24 . 86 . 48 . 09 . 5

0 2 50 3 10 3 70 5 0

0 5 00 7 51 0 01 5 0

0 7 51 0 01 5 02 0 03 0 0

2 0 03 0 04 0 05 0 06 0 0

2 0 03 0 04 0 05 0 06 0 0

0 51 01 52 0

1 52 02 53 04 05 0

3 . 24 . 86 . 49 . 512 . 7

3 . 24 . 86 . 48 . 09 . 5

6 . 47 . 99 . 5

1 2 . 7

1 2 . 71 9 . 12 5 . 43 8 . 1

1 9 . 12 5 . 43 8 . 15 0 . 87 6 . 2

5 0 . 87 6 . 2101.6127.0152.4

5 0 . 87 6 . 2101.6127.0152.4

5 . 01 0 . 01 5 . 02 0 . 0

1 5 . 02 0 . 02 5 . 03 0 . 04 0 . 05 0 . 0

6 0.2

6 0.2

16 0.75

36 3.7

57 37

127 75

182 150

19 0.75

45 3.7

Home sewing machines, typewriters, ATM, coin changer,

cash register, printing machine, facsimile, measurement

equipment, ticket machine, camera, paper feeder,

printer, CPU peripherals, card reader, fish sonar finder,

medical measurement equipment, radio-controlled model,

audio player, VTR, editing equipment

Printer, copier, car antenna, projector

Home sewing machines, line printer, medical bed,

electrical shaver, auto door, copier, massage machine,

editing machine, ticket machine, mower, food processor,

calculator, fish sonar finder, blood pump, home meat slicer

Vending machine, wiper, packing machine, quenching

machine, lift, ice crusher, industrial drier, automated golf

cart, computer, copier, plastic lens polishing machine, food

processing machine, seaweed collector

Small milling machine, mower, power generator

compressor, scrap chopper, hole finishing machine, drilling

machine, glass making machine, food processing

machines, rope coiler, roller coater, mill roll, woodworking

machinery

Saw mill, cutting machine, cutter, mixer, pump, welder,

centrifuge, drilling machine, oscillating mill, lathe, wool

loom, paper manufacturing machine, textile machine

Blower, high pressure pump, change gear, rod mill,

compressor, NC lathe, vibrator, mixer, abrasive boring

machine

Data writer, facsimile, sewing machine

Packaging machine, card reader, textile machine, paper

manufacturing machine, NC lathe, conveyor

18

23

Belt Type MXLTooth Pitch 2.032(mm)Code (width) 3.2(3.2mm) 4.8(4.8mm) 6.4(6.4mm) 9.5(9.5mm) 12.7 (12.7mm)

34 MXL 34 69.0935 MXL 35 71.1240 MXL 40 81.2841 MXL 41 83.3145 MXL 45 91.4446 MXL 46 93.4748 MXL 48 97.5449 MXL 49 99.5750 MXL 50 101.6051 MXL 51 103.63




87 MXL 87 176.7888 MXL 88 178.8289 MXL 89 180.8590 MXL 90 182.8891 MXL 91 184.9192 MXL 92 186.9493MXL 93 188.9894 MXL 94 194.0495 MXL 95 193.0496 MXL 96 195.07

97 MXL 97 197.1098 MXL 98 199.1499 MXL 99 201.17

100 MXL 100 203.20101 MXL 101 205.23102 MXL 102 207.26103 MXL 103 209.30105 MXL 105 213.36106 MXL 106 215.39108 MXL 108 219.46

Product No. of Belt PitchCode Teeth Length (mm)




Timing Belt GTiming Belt G

Standard Belt Sizes

This synchronous transmission belt eliminates the problemsof chains and gears.Extra small pitch type fits well for precision equipment andIT systems.

• Thin, lightweight and superior flexibility of this belt allows compactdesign application.

• It enables efficient high speed power transmission.• Low noise operation compared to chain/gear use.• Cost-Efficient.



135 MXL 135 274.32138 MXL 138 280.42140 MXL 140 284.48142 MXL 142 288.54144 MXL 144 292.61

(D) 145 MXL 145 294.64(D) 146 MXL 146 296.67(D) 147 MXL 147 298.70(D) 148 MXL 148 300.74(D) 150 MXL 150 304.80

(D) 152 MXL 152 308.86(D) 154 MXL 154 312.93(D) 155 MXL 155 314.96(D) 156 MXL 156 316.99(D) 158 MXL 158 321.06(D) 160 MXL 160 325.12(D) 162 MXL 162 329.18(D) 165 MXL 165 335.28(D) 170 MXL 170 345.44(D) 171 MXL 171 347.47











525 MXL 525 1066.80535 MXL 535 1087.12537 MXL 537 1091.18550 MXL 550 1117.60569 MXL 569 1156.21591 MXL 591 1200.91650 MXL 650 1320.80705 MXL 705 1432.56772 MXL 772 1568.70

1369 MXL 1369 2781.81

• This belt is usually made-to-order, however, please check with us for stock when you order.• (D) signifies standard size of double timing belt G (rubber) type.

19

Size

20

Standard Belt SizesBelt Type XL L H

Tooth Pitch 5.08 (mm) 9.525(mm) 12.7(mm)Code (Width) 025(6.4mm) 031(7.9mm) 037(9.5mm) 050(12.7mm) 050(12.7mm) 075(19.1mm) 100(25.4mm) 150(38.1mm) 075(19.1mm) 100(25,4mm) 150(38.1mm) 200(50.8mm) 300(76.2mm)

Product No. of Belt PitchCode Teeth Length(mm)

(D) 60 XL 30 152.40(D) 64 XL 32 162.56(D) 68 XL 34 172.72(D) 70 XL 35 177.80(D) 74 XL 37 187.96(D) 76 XL 38 193.04(D) 78 XL 39 198.12(D) 80 XL 40 203.20(D) 82 XL 41 208.28(D) 84 XL 42 213.36








(D) 250XL 125 635.00(D) 254 XL 127 645.16(D) 260 XL 130 660.40(D) 270 XL 135 685.80(D) 276 XL 138 701.04(D) 280 XL 140 711.20(D) 282 XL 141 716.28(D) 290 XL 145 736.60(D) 300 XL 150 762.00(D) 310 XL 155 787.40




(D) 616 XL 308 1564.64(D) 630 XL 315 1600.20(D) 670 XL 335 1701.80(D) 754 XL 377 1915.16(D) 828 XL 414 2013.12(D) 860 XL 430 2184.40(D)

(D) 109 L 29 276.23(D) 124 L 33 314.33(D) 135 L 36 342.90(D) 150 L 40 381.00(D) 165 L 44 419.10(D) 173 L 46 438.15(D) 180 L 48 457.20(D) 187 L 50 476.25(D) 210 L 56 533.40(D) 217 L 58 552.45





(D)

(D) 225 H 45 571.50(D) 230 H 46 584.20(D) 240 H 48 609.60(D) 245 H 49 622.30(D) 255 H 51 647.70(D) 270 H 54 685.80(D) 280 H 56 711.20(D) 300 H 60 762.00(D) 310 H 62 787.40(D) 315 H 63 800.10(D) 320 H 64 812.80(D) 330 H 66 838.20(D) 340 H 68 863.60(D) 350 H 70 889.00(D) 360 H 72 914.40(D) 370 H 74 939.80(D) 375 H 75 952.50(D) 390 H 78 990.60(D) 400 H 80 1016.00(D) 410 H 82 1041.40(D) 420 H 84 1066.80(D) 430 H 86 1092.20(D) 450 H 90 1143.00(D) 465 H 93 1181.10(D) 480 H 96 1219.20(D) 490 H 98 1244.60(D) 510 H 102 1295.40(D) 530 H 106 1346.20(D) 540 H 108 1371.60(D) 560 H 112 1422.40(D) 570 H 114 1447.80(D) 580 H 116 1473.20(D) 600 H 120 1524.00(D) 605 H 121 1536.70(D) 625 H 125 1587.50(D) 630 H 126 1600.20(D) 640 H 128 1625.60(D) 650 H 130 1651.00(D) 660 H 132 1676.40(D) 680 H 136 1727.20(D) 700 H 140 1778.00(D) 730 H 146 1854.20(D) 750 H 150 1905.00(D) 770 H 154 1955.80(D) 800 H 160 2032.00(D) 810 H 162 2057.40(D) 840 H 168 2133.60(D) 850 H 170 2159.00(D) 860 H 172 2184.40(D) 880 H 176 2235.20(D) 900 H 180 2286.00(D) 950 H 190 2413.00

(D) 1000 H 200 2540.00(D) 1020 H 204 2590.00(D) 1100 H 220 2794.00(D) 1120 H 224 2844.80(D) 1130 H 226 2870.20(D) 1140 H 228 2895.60(D) 1150 H 230 2921.00(D) 1160 H 232 2946.00(D) 1250 H 250 3175.00(D) 1285 H 257 3263.90(D) 1325 H 265 3365.50(D) 1345 H 269 3416.30(D) 1350 H 270 3429.00(D) 1360 H 272 3454.40(D) 1400 H 280 3556.00(D) 1700 H 340 4318.00(D) 1765 H 353 4483.10

(D) signifies the standard size of double timing belt G type.

Size

This synchronous transmission belt eliminates the problems of chains and gears.Extra small pitch type fits well for precision equipment andIT systems.• Thin, lightweight and superior flexibility of this belt allows compact design application.• It enables efficient high speed power transmission.• Low noise operation compared to chain/gear.• Maintenance-free.• Standard belt can be used in the temperature range between -220F and +1940F, and it is also

conductive.

Timing Belt GTiming Belt G




21

Timing Belt G

Standard Belt SizesBelt Type XH XXH

Tooth Pitch 22.225 (mm) 31.750 (mm)Code (Width) 200(50.8mm) 300(76.2mm) 400(101.6mm) 200(50.8mm) 300(76.2mm) 400(101.6mm)

500(127.0mm) 600(152.4mm) 500(127.0mm) 600(152.4mm)



Size

(D463 XH 53 1177.93( 507 XH 58 1289.05(D560 XH 64 1422.40(D630 XH 72 1600.20(D700 XH 80 1778.00

( 735 XH 84 1866.90( 770 XH 88 1955.80( 840 XH 96 2133.60( 927 XH 106 2355.85( 980 XH 112 2489.20

1120 XH 128 2844.801260 XH 144 3200.401400 XH 160 3556.001540 XH 176 3911.601750 XH 200 4445.00

(D700 XXH 56 1778.00( 800 XXH 64 2032.00(D900 XXH 72 2286.00(1000 XXH 80 2540.001200 XXH 96 3048.00

(1400 XXH 112 3556.00(1600 XXH 128 4064.00(1800 XXH 144 4572.00(

Timing Belt G

22

With its high abrasion resistance and lesser rubber dustdispersion, polyurethane timing belts are suitable for use in places where clean environments are required.

• The best for light-duty transmission which requires high precision.• Suitable for paper feeding use because it does not contaminate contact subject.• Smooth and quiet operation as it is flexible to fit well in small diameter pulleys.• Made-to-order system enables manufacture of special form orders.

Timing Belt uTiming Belt u

Standard Belt SizesBelt Type T80

Tooth Pitch 2.032 (mm)Code (Width) 3.2(3.2mm) 4.8(4.8mm) 6.4(6.4mm) 9.5(9.5mm)


Size

(D 30 T80 30 60.96( 35 T80 35 71.12(D 40 T80 40 81.28(D 45 T80 45 91.44(D 46 T80 46 93.47

( 48 T80 48 97.54( 50 T80 50 101.60( 52 T80 52 105.66( 53 T80 53 107.70( 54 T80 54 109.73

55 T80 55 111.7656 T80 56 113.7957 T80 57 115.8259 T80 59 119.8960 T80 60 121.92

( 63 T80 63 128.02( 65 T80 65 132.08( 67 T80 67 136.14( 68 T80 68 138.18( 70 T80 70 142.24

( 71 T80 71 144.27( 72 T80 72 146.30( 73 T80 73 148.34( 74 T80 74 150.37( 75 T80 75 152.40

( 77 T80 77 156.46( 78 T80 78 158.50( 80 T80 80 162.56( 81 T80 81 164.59( 82 T80 82 166.62

( 83 T80 83 168.66( 85 T80 85 172.72( 87 T80 87 176.78( 88 T80 88 178.82( 89 T80 89 180.85

( 90 T80 90 182.88( 91 T80 91 184.91( 93 T80 93 188.98( 94 T80 94 191.04( 95 T80 95 193.04

( 97 T80 97 197.10( 98 T80 98 199.14( 100 T80 100 203.20( 102 T80 102 207.26

( 103 T80 103 209.30

(D 104 T80 104 211.33( 105 T80 105 213.36(D 106 T80 106 215.39(D 108 T80 108 219.46(D 110 T80 110 223.52

( 112 T80 112 227.58( 114 T80 114 231.65( 115 T80 115 233.68( 118 T80 118 239.78( 120 T80 120 243.84

121 T80 121 245.87122 T80 122 247.90123 T80 123 249.94124 T80 124 251.97125 T80 125 254.00

( 126 T80 126 256.03( 130 T80 130 264.16( 132 T80 132 268.22( 135 T80 135 274.32( 140 T80 140 284.48

( 142 T80 142 288.54( 144 T80 144 292.61( 145 T80 145 294.64( 148 T80 148 300.74( 150 T80 150 304.80

( 155 T80 155 314.96( 156 T80 156 316.99( 157 T80 157 319.02( 160 T80 160 325.12( 165 T80 165 335.28

( 170 T80 170 345.44( 175 T80 175 355.60( 180 T80 180 365.76( 184 T80 184 373.89( 185 T80 185 375.92

( 190 T80 190 386.08( 195 T80 195 396.24( 200 T80 200 406.40( 205 T80 205 416.56( 208 T80 208 422.66

( 210 T80 210 426.72( 212 T80 212 430.78( 215 T80 215 436.88( 219 T80 219 445.01

( 220 T80 220 447.04

(D 221 T80 221 449.07( 224 T80 224 455.17(D 225 T80 225 457.20(D 228 T80 228 463.30(D 230 T80 230 467.36

( 231 T80 231 469.39( 232 T80 232 471.42( 235 T80 235 477.52( 236 T80 236 479.55( 239 T80 239 485.65

240 T80 240 487.68245 T80 245 497.84248 T80 248 503.94249 T80 249 505.97250 T80 250 508.00

( 255 T80 255 518.16( 256 T80 256 520.19( 260 T80 260 528.32( 262 T80 262 532.38( 265 T80 265 538.48

( 270 T80 270 548.64( 275 T80 275 558.80( 277 T80 277 562.86( 279 T80 279 566.93( 280 T80 280 568.96

( 285 T80 285 579.12( 288 T80 288 585.22( 290 T80 290 589.28( 295 T80 295 599.44( 296 T80 296 609.60

( 300 T80 300 601.47( 304 T80 304 617.73( 310 T80 310 629.92( 312 T80 312 633.98( 315 T80 315 640.08

( 318 T80 318 646.18( 320 T80 320 650.24( 324 T80 324 658.37( 330 T80 330 670.56( 336 T80 336 682.75

( 340 T80 340 690.88( 344 T80 344 699.01( 350 T80 350 711.20( 355 T80 355 721.36

( 358 T80 358 727.46

(D 360 T80 360 731.52( 370 T80 370 751.84(D 380 T80 380 772.16(D 390 T80 390 792.48(D 397 T80 397 806.70

( 400 T80 400 812.80( 403 T80 403 818.90( 420 T80 420 853.44( 430 T80 430 873.76( 434 T80 434 881.89

442 T80 442 898.14474 T80 474 963.17500 T80 500 1016.00515 T80 515 1046.48550 T80 550 1117.60




• This type is usually made-to-order. However, please check for stock availability when placing order.

23

Timing Belt uTiming Belt u

Standard Belt SizesBelt Type XL L

Tooth Pitch 5.08 (mm) 9.525 (mm)Code (Width) 025(6.4mm) 031(7.9mm) 037(9.5mm) 050(12.7mm) 050(12.7mm) 075(19.1mm) 100(25.4mm) 150 (38.1mm)


(D 60 XL 30 152.40( 64 XL 32 162.56(D 66 XL 33 167.64(D 70 XL 35 177.80(D 76 XL 38 193.04

( 78 XL 39 198.12( 80 XL 40 203.20( 84 XL 42 213.36( 90 XL 45 228.60( 94 XL 47 238.76

96 XL 48 243.84100 XL 50 254.00102 XL 51 259.08104 XL 52 264.16106 XL 53 269.24

( 108 XL 54 274.32( 110 XL 55 279.40( 114 XL 57 289.56( 116 XL 58 294.64( 120 XL 60 304.80

( 124 XL 62 314.96( 126 XL 63 320.04( 128 XL 64 325.12( 130 XL 65 330.20( 136 XL 68 345.44

( 140 XL 70 355.60( 142 XL 71 360.68( 146 XL 73 370.84( 148 XL 74 375.92( 150 XL 75 381.00

( 152 XL 76 386.08( 154 XL 77 391.16( 160 XL 80 406.40( 166 XL 83 421.64( 168 XL 84 426.72

( 170 XL 85 431.80( 176 XL 88 447.04( 180 XL 90 457.20( 186 XL 93 472.44( 190 XL 95 482.60


(D 200 XL 100 508.00( 210 XL 105 533.40(D 212 XL 106 538.48(D 220 XL 110 558.80(D 224 XL 112 568.96

( 230 XL 115 584.20( 240 XL 120 609.60( 250 XL 125 635.00( 254 XL 127 645.16( 260 XL 130 660.40

270 XL 135 685.80290 XL 145 736.60300 XL 150 762.00320 XL 160 812.80330 XL 165 838.20

( 340 XL 170 863.60( 348 XL 174 883.92( 352 XL 176 894.08( 360 XL 180 914.40( 376 XL 188 955.04

( 384 XL 192 975.36( 390 XL 195 990.60( 396 XL 198 1005.84( 414 XL 207 1051.56( 460 XL 230 1168.40

( 480 XL 240 1219.20( 512 XL 256 1300.48( 544 XL 272 1381.76( 550 XL 275 1397.00( 564 XL 282 1432.56

( 630 XL 315 1600.20( 670 XL 335 1701.80( 842 XL 421 2138.68(


(D 124 L 33 314.33( 150 L 40 381.00(D 165 L 44 419.10(D 173 L 46 438.15(D 187 L 50 476.25

( 210 L 56 533.40( 225 L 60 571.50( 240 L 64 609.60( 255 L 68 647.70( 270 L 72 685.80

285 L 76 723.90300 L 80 762.00304 L 81 771.53322 L 86 819.15345 L 92 876.30

( 367 L 98 933.45( 375 L 100 952.50( 390 L 104 990.60( 420 L 112 1066.80( 427 L 114 1085.85

( 450 L 120 1143.00( 480 L 128 1219.20( 510 L 136 1295.40( 525 L 140 1333.50( 540 L 144 1371.60

( 600 L 160 1524.00(

No. of Belt PitchTeeth Length(mm)








T5(DT5) 5.0 (mm)

05(5.0mm) 10(10.0mm) 15(15mm) 20(20.0mm)

T10(DT10) 10.0 (mm)

40(40.0mm) 50(50.0mm)

33 16537 18540 20043 21544 220

45 22549 24550 25051 25552 260

54 27055 27556 28059 29560 300

61 30565 32566 33068 34070 350

(D)

(D)

71 35572 36073 36575 37578 390

80 40082 41084 42085 42588 440

89 44590 45091 45592 46095 475

96 480100 500102 510105 525109 545

110 550

112 560115 575

(D) 118 590

(D) 120 600

122 610

(D) 124 620125 625126 630

(D) 130 650132 660

135 675138 690

(D) 140 700144 720145 725

(D) 150 750156 780

(D) 160 800163 815168 840

(D)(D)

(D)

(D)

(D)(D)

(D)

(D) 170 850(D) 172 860

(D) 180 900

(D) 188 940

195 975

198 990200 1000215 1075

218 1090(D) 220 1100

223 1115

(D) 228 1140

243 1215270 1350276 1380

288 1440

37 37040 400

41 410

44 440

45 450

50 500(D) 53 530

55 550

56 560(D) 60 600

61 610

(D) 63 630

65 650(D) 66 660

69 690

(D) 70 700(D) 72 720(D) 75 750

78 780(D) 80 800

178 1780(D)180 1800

(D)188 1880

196 1960

216 2160

220 2200

221 2210

225 2250

115 1150(D)120 1200

(D)121 1210

(D)124 1240

(D)125 1250

(D)130 1300(D)132 1320

(D)135 1350

138 1380139 1390

(D)140 1400

(D)142 1420

145 1450146 1460

(D)150 1500

156 1560(D)160 1600(D)161 1610

(D)170 1700175 1750

81 810(D) 84 840

85 850

88 880

89 890

(D) 90 90091 91092 920

94 94095 950

96 960

97 970

(D) 98 980(D)100 1000

101 1010

105 1050108 1080

(D) 110 1100111 1110114 1140

Size

(D) signifies double timing belt.

Timing belt power transmission systems work the best whenhigh accuracy belts and precisely processed pulleys smoothlymesh with each other.

• Cutting with hob cutter enables good power transmission.• MBL accepts your request for material, form and processing method.• Flange is not sold separately as a single item.

Timing PulleyTiming Pulley

Standard Pulley Types & Sizes

Belt Type MXL-Rod ShapeNo. of Teeth PD (mm) OD (mm) Product Code Length Material (mm)

10 6.47 5.96 P 10 MXL 10012 7.76 7.25 P 12 MXL 10013 8.41 7.90 P 13 MXL 10014 9.06 8.55 P 14 MXL 10015 9.70 9.19 P 15 MXL 10016 10.35 9.84 P 16 MXL 10017 11.00 10.49 P 17 MXL 10018 11.64 11.13 P 18 MXL 10019 12.29 11.78 P 19 MXL 10020 12.94 12.43 P 20 MXL 100



56 36.22 35.71 P 56 MXL 10060 38.81 38.30 P 60 MXL 10064 41.40 40.89 P 64 MXL 10070 45.28 44.77 P 70 MXL 10072 46.57 46.06 P 72 MXL 10080 51.74 51.24 P 80 MXL 10084 54.33 53.82 P 84 MXL 10096 62.09 61.59 P 96 MXL 100

100 64.68 64.17 P100MXL 100120 77.62 77.11 P120MXL 100

Belt Type XLNo. of Pulley OD Product No. of Pulley OD ProductTeeth Type (mm) Code Teeth Type (mm) Code10 C 15.66 10XL037 30 B 48.00 30XL03711 C 17.28 11XL037 32 A • B 51.24 32XL03712 C 18.90 12XL037 34 A • B 54.47 34XL03714 C 22.13 14XL037 36 A • B 57.70 36XL03715 C 23.75 15XL037 38 A • B 60.94 38XL03716 B 25.36 16XL037 40 A • B 64.17 40XL03718 B 28.60 18XL037 42 A • B 67.41 42XL03719 B 30.22 19XL037 44 A • B 70.64 44XL03720 B 31.83 20XL037 48 W 77.11 48XL03721 B 33.45 21XL037 50 W 80.34 50XL037

22 B 35.07 22XL037 60 W 96.51 60XL03724 B 38.30 24XL037 72 W 115.92 72XL03725 B 39.92 25XL03726 B 41.53 26XL03728 B 44.77 28XL037

Belt Type LNo. of Pulley OD Product CodeTeeth Type (mm)

10 A • B 29.56 10 L 05012 A • B 35.62 12 L 050 12 L 07514 A • B 41.68 14 L 050 14 L 075 14 L 10015 A • B 44.72 15 L 050 15 L 075 15 L 10016 A • B 47.75 16 L 050 16 L 075 16 L 100

17 A • B 50.78 17 L 050 17 L 075 17 L 10018 A • B 53.81 18 L 050 18 L 075 18 L 10019 A • B 56.84 19 L 050 19 L 075 19 L 10020 A • B 59.88 20 L 050 20 L 075 20 L 10021 A • B 62.91 21 L 050 21 L 075 21 L 100



40 A • B 120.51 40 L 050 40 L 075 40 L 10044 A • B 132.64 44 L 050 44 L 075 44 L 10048 W 144.77 48 L 050 48 L 075 48 L 10050 W 150.83 50 L 050 50 L 075 50 L 10060 W 181.15 60 L 050 60 L 075 60 L 100

72 W 217.53 72 L 050 72 L 075 72 L 100

Belt Type MXL for Belt Width - 6.4mmNo. of Teeth Pulley Type Material PD (mm) OD (mm) Product Code

20 B 12.94 12.43 P 20 MXL 6.421 B 13.58 13.07 P 21 MXL 6.422 B 14.23 13.72 P 22 MXL 6.423 B 14.88 14.37 P 23 MXL 6.424 B 15.52 15.02 P 24 MXL 6.425 B 16.17 15.66 P 25 MXL 6.426 B 16.82 16.31 P 26 MXL 6.427 B 17.46 16.96 P 27 MXL 6.428 B 18.11 17.60 P 28 MXL 6.430 B 19.40 18.90 P 30 MXL 6.4

32 B 20.70 20.19 P 32 MXL 6.436 B 23.29 22.78 P 36 MXL 6.440 B 25.87 25.36 P 40 MXL 6.448 B 31.05 30.54 P 48 MXL 6.460 B 38.81 38.30 P 60 MXL 6.472 B 46.57 46.06 P 72 MXL 6.484 B 54.33 53.82 P 84 MXL 6.496 B 62.09 61.59 P 96 MXL 6.4

120 B 77.62 77.11 P120MXL 6.4

100

High-StrengthAluminum

Alloy

High-StrengthAluminum

Alloy

• For MXL standard pulley, we stock in rod shape.

Material: steel

Material: steel

24

Timing PulleyTiming Pulley

Standard Pulley Types & Sizes

Belt Type HNo. of Pulley OD Product CodeTeeth Type (mm)

14 A • B 55.22 14H100 14H150 14H20015 A • B 59.27 15H100 15H150 15H200 16 A • B 63.31 16H100 16H150 16H200 18 A • B 71.39 18H100 18H150 18H20019 A • B 75.44 19H100 19H150 19H200

20 A • B 79.48 20H100 20H150 20H200 21 A • B 83.52 21H100 21H150 21H200 22 A • B 87.56 22H100 22H150 22H200 24 A • B 95.65 24H100 24H150 24H200 25 A • B 99.69 25H100 25H150 25H200

26 A • B 103.73 26H100 26H150 26H200 28 A • B 111.82 28H100 28H150 28H200 30 A • B 119.90 30H100 30H150 30H200 32 A • B 127.99 32H100 32H150 32H200 34 A • B 136.07 34H100 34H150 34H200

36 A • B 144.16 36H100 36H150 36H200 40 A • B 160.33 40H100 40H150 40H200 44 W 176.50 44H100 44H150 44H200 48 W 192.67 48H100 48H150 48H200 50 W 200.75 50H100 50H150 50H200

60 W 241.18 60H100 60H150 60H200 72 W 289.69 72H100 72H150 72H200

Belt Type T5No. of Pulley OD Product CodeTeeth Type (mm)

No. of Teeth

Pulley Product Code

Belt Type

Pulley Type FormBelt Width (inch x 100)(Note: belt width is in mm for MXL type)

Add “P” in front of the product code fo MXL type (Ex) P26MXL6.4B) A Type B Type C Type W TypeTooth profile for standard pulleys is in-volute shape complying with ISOstandards.

12 C 18.25 PT5-10-1214 C 21.45 PT5-10-1415 C 23.05 PT5-10-1516 B 24.60 PT5-10-1618 B 27.80 PT5-10-18

20 B 31.00 PT5-10-2022 B 34.25 PT5-10-2224 B 37.40 PT5-10-2425 B 39.00 PT5-10-2526 B 40.60 PT5-10-26

28 B 43.75 PT5-10-2830 B 46.95 PT5-10-3032 A • B 50.10 PT5-10-3236 A • B 56.45 PT5-10-3640 A • B 62.85 PT5-10-40

44 W 69.20 PT5-10-4448 W 75.55 PT5-10-4850 W 78.75 PT5-10-5060 W 94.65 PT5-10-60

Belt Type T10No. of Pulley OD Product CodeTeeth Type (mm)12 A • B 36.35 PT10-15-12 PT10-25-1214 A • B 42.70 PT10-15-14 PT10-25-1415 A • B 45.90 PT10-15-15 PT10-25-1516 A • B 49.05 PT10-15-16 PT10-25-1618 A • B 55.45 PT10-15-18 PT10-25-18

20 A • B 61.80 PT10-15-20 PT10-25-2022 A • B 68.15 PT10-15-22 PT10-25-2224 A • B 74.55 PT10-15-24 PT10-25-2425 A • B 77.70 PT10-15-25 PT10-25-2526 A • B 80.90 PT10-15-26 PT10-25-26

28 A • B 87.25 PT10-15-28 PT10-25-2830 A • B 93.65 PT10-15-30 PT10-25-3032 A • B 100.00 PT10-15-32 PT10-25-3236 A • B 112.75 PT10-15-36 PT10-25-3640 A • B 125.45 PT10-15-40 PT10-25-40

44 W 138.20 PT10-15-44 PT10-25-4448 W 150.95 PT10-15-48 PT10-25-4850 W 157.30 PT10-15-50 PT10-25-5060 W 189.10 PT10-15-60 PT10-25-60

Material: steel

Material: steel

Material: steel

(Example)

25

26

Environmental-friendly rubber timing belts with EPDMcompound rubber use.

• Excellent ozone resistance.• Less dispersion of rubber dust.

green eco® Seriesgreen eco® Series

Standard Dimensions and Product Code

MXL

XL

S2M

S3M

ST1.0

ST1.5

ST2.0

ST55

ST80

ST83

ST111

Belt Type Standard Dimensions Product Code

Belt TypeNo. of Teeth Belt Width(mm)

Belt TypeBelt Length (inch) x10 Belt Width (inch) x100








Belt TypeBelt Width (mm) x10 Nominal Length (mm)

Belt TypeBelt Width (mm) x10 Nominal Length (mm)

27

This belt is for long-span linear drives and light-dutysynchronous transmission and transportation.

• Freer design possible as the length can be extended.

LONG-SPAN Timing Belt(Open-End & Endless)LONG-SPAN Timing Belt(Open-End & Endless)

Open-End

Size Range for Open-End

• Rubber Timing Belt

Belt Length (m)Belt Type

Belt Width (inch x 100)

Open-End

Belt Width (mm x 10)Belt Type

Belt Length (m)

EndlessBelt Length (inch x 10)

Belt TypeBelt Width (inch x 100)

Endless

Belt Width (mm x 10)

Belt Type

Belt Length (mm)

Open-EndBelt Type

Belt Width (mm)

Belt Length (m)

Open-End

Belt Type

Belt Width (mm x 10)Belt Length (m)

Round tooth (S2M, S3M)

Trapezoidal tooth (T80, T5, T10, XL*, L*)


Trapezoidal tooth (MXL*, XL, L. H)

Round tooth (S2M, S3M, S5M, S8M, S14M)

Trapezoidal tooth (L, H, XH, XXH)

Example

Example

Example

* For XL and L types, belt width is indicated as (inch x100)

* For MXL type, belt width is in mm

Trapezoidal tooth (MXL, XL, L. H)

Round tooth (S2M, S3M, S5M, S8M, S14M)

Size Range for Endless

Width (mm)Belt Type 4 6 10 15 20 25 30 40 50 60

S2M 89 58 35

S3M 110 65 43

S5M 78 50 87 68

S8M 124 82 60 48 55 39 30 24

S14M 58 48 34 27

* Please order by above length unit.

* Please order by above length unit.

Belt TypeBelt Width (mm) Maximum

Minimum Maximum Belt Length (mm)

L 12.7 355 20.0

H 19.1 343 20.0

XH 50.8 406 20.0

XXH 50.8 406 20.0

S8M 19.1 342 20.0

S14M 50.0 406 20.0

* Please take the tension limit as around1/2 that of common sized timing belt.

Size Range for Open-End • Thermosetting Polyurethane Timing Belt

Trapezoidal tooth (T80, XL, L) (Unit: m)

(Unit: m)

(Unit: m)

Width (mm) 6.4 9.5 12.7 19.1Inch 025 037 050 075Belt Type

MXL 52 35

XL 71 48 36 17

L 51 38 10

(Unit: m)

(Unit: m)

Width (mm) 4 5 6 10 15 20 25Belt TypeS2M 99 80 67

S3M 98 82 50 33

Trapezoidal tooth (T5, T10)


Width (mm) 6.4 9.5 12.7 19.1 25.4 38.1Inch. x100 025 037 050 075 100 150 Belt Type

MXL 67 44 34

XL 129 86 64

L 72 47 34

H 129 86 63 41

Width (mm) 5 10 15 20 25Belt TypeT5 87 44 29

T10 49 32 17 13

28

FREESPAN® BeltFREESPAN® Belt

1. Suitable for synchronous transportation andlight-duty power transmission requiring positioning.

2. Possible to mold various shapes and profiles andto add special cover on back surface of belt.

• Characteristics3. Application for long-span reciprocating and revolving

motion.

4. Belt length can be set freely up to 100 meters.

1. Endless TypeFor long-span revolving movement.

• Belt Type2. Open-End Type

For reciprocation movement.

• For operation requires flex resistance, endless type with aramid cord is recommended.

• When clamping the belt, ensure to mesh at least 6 teeth at each side(8 teeth and above for AT-20H).

FREESPAN® Belt

Steel Wire Cord

Aramid Cord

TrapezoidalTooth

TrapezoidalTooth

Round Tooth

Flat

Round Tooth

Metric Type T5 • T10

Inch Pitch Type XL • L • H

AT Type AT5 • AT10 • AT-20H

STPD Type S5M • S8M

F20 • F20D

Metric Type T5 • T10

Inch Pitch Type XL • L • H

STPD Type S5M • S8M

FTFREESPAN® Belt

K: Aramid cordW: Steel cord

G: GreenH: White

Standard ProductsKG: Aramid cord-GreenWH: Steel cord-White

Belt Width CodeT5 • T10 • AT5 • AT10 • AT-20H • F20 • F20D: [mm]S5M • S8M: [mm] X 10XL • L • H [inch] X 100

BeltFormT5 • T10 • AT5 • AT10 • AT-20HS5M • S8M • XL • L • HF20 • F20D No. of Belt Teeth

Belt Length in mmonly for flat belt F20/F20D

TypeE: Endless typeO: Open-end type

Additional SpecificationsP: ProfileC: CoverT: Fabric on tooth surface

(Low noise application)B: Fabric on back surface

(Accumulator application)D: Fabric on both sidesQ: Fabric on profile and tooth surfaceR: Fabric on cover and tooth surfaceX: Other specifications

Belt Form T5 T10 AT5 AT10 AT-20H XLBelt Cross-Sectional

Dimensions

Belt Width(mm) &

Width Code

Belt Width Width Code10 1015 1520 2025 2530 3040 40

Belt Width Width Code15 1520 2025 2530 3040 4050 5075 75100 100

Belt Width Width Code10 1015 1520 2025 2530 3040 4050 50

Belt Width Width Code50 5075 75100 100

Belt Width Width Code6.4 0259.5 03712.7 05019.1 07525.4 100

Belt Width Width Code15 1520 2025 2540 4050 5075 75100 100

* For F20D, only 40 available


Belt Width Width Code10 10015 15020 20025 25030 30050 500

Belt Width Width Code19.1 07525.4 10038.1 15050.8 20076.2 300101.6 400

Belt Width Width Code12.7 05019.1 07525.4 10038.1 15050.8 200101.6 400

Belt Cross-Sectional

Dimensions

Belt Width(mm) &

Width Code

Belt Form L H S5M S8M F20 F20D

* Maximum and minimum lengths of endless type are 100m and 700mm respectively. However, maximum length is 50m for the types with fabric on teeth side, back side and both sides.* Except T5, AT5, XL and S5M, all timing belts can be laminated with high friction urethane, PVC or felt on backside.* Compared to non-fabric type, belts with fabric are more slippery and noiseless.


1.01.2

5.0

2.02.5

10.0

1.51.2

5.0

2.02.5

10.0

3.05.0

20.0

1.031.27

5.08

1.701.90

9.525

2.972.29

12.7

1.51.81

5.0

2.25

3.058.0

F20

F20D

2.0

2.0

CONV

EYOR

BEL

TS

( (

Frictional Forced PowerTransmission Belt

1. Conventional V-Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 302. Triplex® Rawedge Cogged V-Belt . . . . . . . . . . . . . . . P. 31 & 323. Conventional Banded . . . . . . . . . . . . . . . . . . . . . . . P. 33 & 344. Triplex® Rawedge Cogged Banded . . . . . . . . . . . . . . . . . P. 355. Maxstar Wedge® V-Belt

Maxstar Wedge Supreme® . . . . . . . . . . . . . . . . . . . . . . . . P. 366. Maxstar Wedge® Narrow Banded . . . . . . . . . . . . . . P. 37 & 387. Multi Super Wedge II . . . . . . . . . . . . . . . . . . . . . . . . P. 39 & 408. Maxstar Wedge Supreme® Narrow Cogged Banded . . . .P. 419. FHP V-Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 42

10. MBL Super KB® Premium FHP Belt . . . . . . . . . . . . . . . . . P. 4311. Narrow V-Belt for DIN 7753-ISO 4184 . . . . . . . . . . . . . . . P. 4412. Double Angle Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 4513. Ribstar® Belt G (Rubber V-Ribbed Belt) . . . . . . . . . . . . . P. 4614. SuPER VS® Belt (Variable Speed Belt) . . . . . . . . . . . . . . P. 4715. Flexstar® Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 4816. Super Flexstar® Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 4917. Polymax® Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 5018. MB Belt® (Polyurethane V-Belt) . . . . . . . . . . . . . . . . . . . . P. 5119. STARROPE®/SuPER STARROPE®/PRENE V-ROPE/

PRENE HEXAGONAL-ROPE . . . . . . . . . . . . . . . . . . . . . . P. 5220. Flat Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 5321. Flexstar® Belt J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 54

30

This type is most commonly used as a means for power transmission. Therefore, it iseconomic and available in the market. Also, it is easily replaced.

• Our “SET-FREE®” system for multiple belt usage is very effective to reducedimensional differences of each belt.

• Conventional V-Belt is a heavy-duty power transmission belt, which has heat, oil andflex resistance as well as a high antistatic property.

Conventional V-BeltConventional V-Belt

Cross-Sectional Dimensions

M Type A Type B Type C Type D Type E Type(No.) (No.) (No.) (No.) (No.) (No.)

Product Code

• Belt code indicates nominal length of the belt in inches.(For M type, length is outer circumference)

(10.0mm)(12.5mm)

(16.5mm)

(22.0mm)

(31.5mm)

(38.0mm)

(19.0mm)(14.0mm)

(11.0mm)(9.0mm)(5.5mm)

(25.0mm)

2/5”1/2”

21/32”

7/8”

1-1/4”

1-1/2”

29/32”

3/4”17/32”

13/32”5/16”2/9”

Standard Belt Sizes

(Note) Above dimensions are nominal values.

20 20 60 100 25 65 112 40 86 190 100 18021 21 61 102 26 66 115 42 87 200 105 21022 22 62 105 27 67 118 45 88 210 110 24023 23 63 108 28 68 120 48 89 220 115 27024 24 64 110 29 69 122 50 90 230 120 30025 25 65 112 30 70 125 51 91 240 125 33026 26 66 115 31 71 128 52 92 250 130 36027 27 67 118 32 72 130 53 93 260 135 39028 28 68 120 33 73 132 54 94 270 140 42029 29 69 122 34 74 135 55 95 145

9630 30 70 125 35 75 138 56 15031 31 71 128 36 76 140 57 97 15532 32 72 130 37 77 145 58 98 16033 33 73 135 38 78 150 59 99 16534 34 74 140 39 79 155 60 100 170

35 35 75 145 40 80 160 61 102 18036 36 76 150 41 81 165 62 105 190 37 37 77 155 42 82 170 63 108 200 38 38 78 160 43 83 180 64 110 21039 39 79 165 44 84 190 65 112 220

11540 40 80 170 45 85 200 23041 41 81 180 46 86 210 67 118 24042 42 82 47 87 68 120 25043 43 83 48 88 69 122 26044 44 84 49 89 70 125 27045 45 85 50 90 71 128 28046 46 86 51 91 72 130 30047 47 87 52 92 73 132 31048 48 88 53 93 74 135 33049 49 89 54 94 75 138 360

14050 50 90 55 95

51 91 56 96 77 14252 92 57 97 78 14553 93 58 98 79 14854 94 59 99 80 15055 95 60 100 81 15556 96 61 102 82 16057 97 62 105 83 16558 98 63 108 84 17059 99 64 110 85 180

*: Manufacturable sizes - please contact us for availability.


31

Triplex® RawedgeCogged V-BeltTriplex® RawedgeCogged V-Belt

Product Code

• Belt code is nominal length in inches.

Belt Type Belt Code (inch)

AX – 40

36ª 36ª 36ª

1/2”(13.0mm)

11/32”(9mm)


21/32”(17.0mm)

7/16”(11mm)

7/8”(22.0mm)

9/16”(14mm)AX BX CX

Standard Belt SizesAX

All dimensions are nominal value.: Available sizes for raw edge cogged belt AX.


Widely-used power transmission belt.Cost efficient, readily available, easily changeable.

Belt OutsideCode Length

(Inch)


(Inch)


(Inch)AX 20AX 21AX 22AX 23AX 24AX 25AX 26AX 27AX 28AX 29AX 30AX 31AX 32AX 33AX 34AX 35AX 36AX 37AX 38AX 39AX 40AX 41AX 42AX 43AX 44AX 45AX 46AX 47AX 48AX 49AX 50AX 51AX 52AX 53AX 54AX 55AX 56AX 57AX 58AX 59AX 60

22.123.124.125.126.127.128.129.130.131.132.133.134.135.136.137.138.139.140.141.142.143.144.145.146.147.148.149.150.151.152.153.154.155.156.157.158.159.160.161.162.1

AX 61AX 62AX 63AX 64AX 65AX 66AX 67AX 68AX 69AX 70AX 71AX 72AX 73AX 74AX 75AX 76AX 77AX 78AX 79AX 80AX 81AX 82AX 83AX 84AX 85AX 86AX 87AX 88AX 89AX 90AX 91AX 92AX 93AX 94AX 95AX 96AX 97AX 98AX 99AX 100AX 101

63.164.165.166.167.168.169.170.171.172.173.174.175.176.177.178.179.180.181.182.183.184.185.186.187.188.189.190.191.192.193.194.195.196.197.198.199.1100.1101.1102.1103.1

AX 102AX 103AX 104AX 105AX 106AX 107AX 108AX 109AX 110AX 112AX 115AX 116AX 118AX 120AX 122AX 124AX 125AX 128AX 130AX 134AX 135AX 136AX 140AX 144AX 150AX 158AX 160AX 162AX 165AX 167AX 170AX 173AX 176AX 180AX 185AX 187AX 190AX 195AX 197AX 200

104.1105.1106.1107.1108.1109.1110.1111.1112.1114.1117.1118.1120.1122.1124.1126.1127.1130.1132.1136.1137.1138.1142.1146.1152.1160.1162.1164.1167.1169.1172.1173.1178.1182.1187.1189.1192.1197.1199.1202.1

32

BX

All dimensions are nominal value.: Available sizes for raw edge cogged belt BX and CX.

CX

Size range: 79” - 660”


(Inch)


(Inch)


(Inch)

Triplex® Rawedge Cogged V-BeltTriplex® Rawedge Cogged V-Belt

BX 20BX 21BX 22BX 23BX 24BX 25BX 26BX 27BX 28BX 29BX 30BX 31BX 32BX 33BX 34BX 35BX 36BX 37BX 38BX 39BX 40BX 41BX 42BX 43BX 44BX 45BX 46BX 47BX 48BX 49BX 50BX 51BX 52BX 53BX 54BX 55BX 56BX 57BX 58BX 59BX 60BX 61BX 62BX 63BX 64BX 65BX 66BX 67BX 68BX 69BX 70BX 71BX 72BX 73BX 74BX 75BX 76BX 77

22.823.824.825.826.827.828.829.830.831.832.833.834.835.836.837.838.839.840.841.842.843.844.845.846.847.848.849.850.851.852.853.854.855.856.857.858.859.860.861.862.863.864.865.866.867.868.869.870.871.872.873.874.875.876.877.878.879.8

BX 78BX 79BX 80BX 81BX 82BX 83BX 84BX 85BX 86BX 87BX 88BX 89BX 90BX 91BX 92BX 93BX 94BX 95BX 96BX 97BX 98BX 99BX 100BX 101BX 102BX 103BX 104BX 105BX 106BX 107BX 108BX 110BX 112BX 114BX 115BX 116BX 117BX 118BX 120BX 122 BX 124BX 125BX 126BX 128BX 130BX 132BX 133BX 134BX 135BX 136BX 138BX 140BX 142BX 144BX 146BX 148BX 150BX 152

80.881.882.883.884.885.886.887.888.889.890.891.892.893.894.895.896.897.898.899.8100.8101.8102.8103.8104.8105.8106.8107.8108.8109.8110.8112.8114.8116.8117.8118.8119.8120.8122.8124.8126.8127.8128.8130.8132.8134.8135.8136.8137.8138.8140.8142.8144.8146.8148.8150.8152.8154.8

BX 155BX 156BX 158BX 160BX 162BX 164BX 165BX 166BX 169BX 170BX 173BX 175BX 177BX 180BX 185BX 188BX 190BX 192BX 195BX 197BX 200BX 204BX 205BX 210BX 215BX 218BX 220BX 225BX 228BX 230BX 232BX 236BX 238BX 240BX 245BX 248BX 250BX 255BX 260BX 264BX 268BX 270BX 276BX 280BX 290BX 300BX 310BX 320BX 330BX 340BX 350BX 360BX 370BX 380BX 390BX 400

CX 30CX 31CX 32CX 33CX 34CX 35CX 36CX 37CX 38CX 39CX 40CX 41CX 42CX 43CX 44CX 45CX 46CX 47CX 48CX 49CX 50CX 51CX 52CX 53CX 54CX 55CX 56CX 57CX 58CX 59CX 60CX 61CX 62CX 63CX 64CX 65CX 66CX 67CX 68CX 69CX 70CX 71CX 72CX 73CX 74CX 75CX 76CX 77CX 78CX 79CX 80CX 81CX 82CX 83CX 84CX 85CX 86CX 87CX 88CX 89CX 90CX 91CX 92CX 93CX 94CX 95CX 96CX 97CX 98CX 99CX 100CX 101CX 102CX 103CX 104CX 105CX 106CX 107CX 108CX 109CX 110CX 111CX 112CX 113

CX 114CX 115CX 116CX 118CX 120CX 122CX 124CX 125CX 126CX 128CX 129CX 130CX 132CX 134CX 136CX 138CX 140CX 142CX 144CX 146CX 148CX 150CX 152CX 154CX 155CX 158CX 160CX 162CX 164CX 168CX 170CX 173CX 175CX 177CX 180CX 183CX 185CX 187CX 190CX 195CX 197CX 200CX 202CX 204CX 205CX 210 CX 215CX 220CX 222CX 224CX 225CX 228CX 230CX 235CX 238CX 240CX 246CX 248CX 250CX 256CX 258CX 260CX 264CX 268CX 270CX 275CX 280CX 290CX 300CX 320CX 340CX 350CX 360CX 370CX 380 CX 400CX 415CX 434CX 473CX 492CX 512CX 550CX 590

34.235.236.237.238.239.240.241.242.243.244.245.246.247.248.249.250.251.252.253.254.255.256.257.258.259.260.261.262.263.264.265.266.267.268.269.270.271.272.273.274.275.276.277.278.279.280.281.282.283.284.285.286.287.288.289.290.291.292.293.294.295.296.297.298.299.2100.2101.2102.2103.2104.2105.2106.2107.2108.2109.2110.2111.2112.2113.2114.2115.2116.2117.2

118.2119.2120.2122.2124.2126.2128.2129.2130.2132.2133.2134.2136.2138.2140.2142.2144.2146.2148.2150.2152.2154.2156.2158.2159.2162.2164.2166.2168.2172.2174.2177.2179.2181.2184.2187.2189.2191.2194.2199.2201.2204.2206.2208.2209.2214.2217.2222.2224.2226.2227.2230.2232.2237.2240.2242.2248.2250.2252.2258.2260.2262.2264.2270.2272.2277.2282.2292.2302.2322.2342.2352.2362.2372.2382.2402.2417.2436.2475.2494.2514.2552.2592.2

157.8158.8160.8162.8164.8166.8167.8168.8171.8172.8175.8177.8179.8182.8187.8190.8192.8194.8197.8199.8202.8206.8207.8212.8217.3220.3222.3227.3230.3232.3234.3238.3240.3242.3247.3250.3252.3257.3262.3266.3270.3272.3278.3272.3292.3302.3312.3322.3332.3342.3352.3362.3372.3382.3392.3402.3


(Inch)


(Inch)

TOPWIDTH

PITCH BETWEEN

BELTS

THICKNESS

33

All the quality features and benefits of single belts - Plus.• Designed for tough applications where multiple drive belts are subject

to heavy shock and pulsating loads.• Banding prevents belt whip, belt turnover, vibration and jumping off that may

occur with single belts in multiple drive applications.• Lateral rigidity keeps the belt running in a straight line as it enters the pulley

grooves during strong pulsating or shock loads for reduced wear.• Frictional and wedging principles of the V-Belt drive apply and prevent slip at

low tension and low bearing loads.

Conventional BandedConventional Banded

Cross-Sectional Dimensions Product Code 3R = 3 RibsB = Cross Section

144 = Nominal Length, 144.0 inches

3R B 144

Belt Top Width Thickness Pitch Between BeltsSection W H E

(Inches) (Inches) (Inches)

B .66 .51 .75C .88 .63 1.00D 1.25 .85 1.46

BBelt OutsideNo. Length

(Inch) 2R B 83 85.83R B 83 85.84R B 83 85.85R B 83 85.8

2R B 85 87.83R B 85 87.84R B 85 87.85R B 85 87.8

2R B 86 88.83R B 86 88.84R B 86 88.85R B 86 88.8

2R B 87 89.83R B 87 89.84R B 87 89.85R B 87 89.8

2R B 88 90.83R B 88 90.84R B 88 90.85R B 88 90.8

2R B 90 92.83R B 90 92.84R B 90 92.85R B 90 92.8

2R B 93 95.83R B 93 95.84R B 93 95.85R B 93 95.8

2R B 95 97.83R B 95 97.84R B 95 97.85R B 95 97.8

2R B 96 98.83R B 96 98.84R B 96 98.85R B 96 98.8

2R B 97 99.83R B 97 99.84R B 97 99.85R B 97 99.8

2R B 99 101.83R B 99 101.84R B 99 101.85R B 99 101.8

Belt OutsideNo. Length

(Inch) 2R B 71 73.83R B 71 73.84R B 71 73.85R B 71 73.8

2R B 72 74.83R B 72 74.84R B 72 74.85R B 72 74.8

2R B 73 75.83R B 73 75.84R B 73 75.85R B 73 75.8

2R B 74 76.83R B 74 76.84R B 74 76.85R B 74 76.8

2R B 75 77.83R B 75 77.84R B 75 77.85R B 75 77.8

2R B 77 79.83R B 77 79.84R B 77 79.85R B 77 79.8

2R B 78 80.83R B 78 80.84R B 78 80.85R B 78 80.8

2R B 79 81.83R B 79 81.84R B 79 81.85R B 79 81.8

2R B 80 82.83R B 80 82.84R B 80 82.85R B 80 82.8

2R B 81 83.83R B 81 83.84R B 81 83.85R B 81 83.8

2R B 82 84.83R B 82 84.84R B 82 84.85R B 82 84.8


(Inch) 2R B 55 57.83R B 55 57.84R B 55 57.85R B 55 57.8

2R B 60 62.83R B 60 62.84R B 60 62.85R B 60 62.8

2R B 61 63.83R B 61 63.84R B 61 63.85R B 61 63.8

2R B 62 64.83R B 62 64.84R B 62 64.85R B 62 64.8

2R B 63 65.83R B 63 65.84R B 63 65.85R B 63 65.8

2R B 64 66.83R B 64 66.84R B 64 66.85R B 64 66.8

2R B 65 67.83R B 65 67.84R B 65 67.85R B 65 67.8

2R B 66 68.83R B 66 68.84R B 66 68.85R B 66 68.8

2R B 67 69.83R B 67 69.84R B 67 69.85R B 67 69.8

2R B 68 70.83R B 68 70.84R B 68 70.85R B 68 70.8

2R B 70 72.83R B 70 72.84R B 70 72.85R B 70 72.8


(Inch) 2R B 120 122.83R B 120 122.84R B 120 122.85R B 120 122.8

2R B 124 126.83R B 124 126.84R B 124 126.85R B 124 126.8

2R B 128 130.83R B 128 130.84R B 128 130.85R B 128 130.8

2R B 133 135.83R B 133 135.84R B 133 135.85R B 133 135.8

2R B 136 138.83R B 136 138.84R B 136 138.85R B 136 138.8

2R B 144 146.83R B 144 146.84R B 144 146.85R B 144 146.8

2R B 148 150.83R B 148 150.84R B 148 150.85R B 148 150.8

2R B 150 152.83R B 150 152.84R B 150 152.85R B 150 152.8

2R B 158 160.83R B 158 160.84R B 158 160.85R B 158 160.8

2R B 162 164.83R B 162 164.84R B 162 164.85R B 162 164.8

2R B 173 175.83R B 173 175.84R B 173 175.85R B 173 175.8


(Inch) 2R B 180 182.83R B 180 182.84R B 180 182.85R B 180 182.8

2R B 195 197.83R B 195 197.84R B 195 197.85R B 195 197.8

2R B 210 212.83R B 210 212.84R B 210 212.85R B 210 212.8

2R B 225 226.33R B 225 226.34R B 225 226.35R B 225 226.3

2R B 240 241.33R B 240 241.34R B 240 241.35R B 240 241.3

2R B 255 256.33R B 255 256.34R B 255 256.35R B 255 256.3

2R B 270 271.33R B 270 271.34R B 270 271.35R B 270 271.3

2R B 285 286.33R B 285 286.34R B 285 286.35R B 285 286.3

2R B 300 301.33R B 300 301.34R B 300 301.35R B 300 301.3

2R B 315 316.33R B 315 316.34R B 315 316.35R B 315 316.3


(Inch) 2R B 100 102.83R B 100 102.84R B 100 102.85R B 100 102.8

2R B 103 105.83R B 103 105.84R B 103 105.85R B 103 105.8

2R B 104 106.83R B 104 106.84R B 104 106.85R B 104 106.8

2R B 105 107.83R B 105 107.84R B 105 107.85R B 105 107.8

2R B 107 109.83R B 107 109.84R B 107 109.85R B 107 109.8

2R B 108 110.83R B 108 110.84R B 108 110.85R B 108 110.8

2R B 110 112.83R B 110 112.84R B 110 112.85R B 110 112.8

2R B 111 113.83R B 111 113.84R B 111 113.85R B 111 113.8

2R B 112 114.83R B 112 114.84R B 112 114.85R B 112 114.8

2R B 114 116.83R B 114 116.84R B 114 116.85R B 114 116.8

2R B 115 117.83R B 115 117.84R B 115 117.85R B 115 117.8

34

CBelt OutsideNo. Length

(Inch) 2R C 68 72.23R C 68 72.24R C 68 72.25R C 68 72.2

2R C 71 75.23R C 71 75.24R C 71 75.25R C 71 75.2

2R C 75 79.23R C 75 79.24R C 75 79.25R C 75 79.2

2R C 81 85.23R C 81 85.24R C 81 85.25R C 81 85.2

2R C 85 89.23R C 85 89.24R C 85 89.25R C 85 89.2

2R C 90 94.23R C 90 94.24R C 90 94.25R C 90 94.2

2R C 96 100.23R C 96 100.24R C 96 100.25R C 96 100.2

2R C 97 101.23R C 97 101.24R C 97 101.25R C 97 101.2

2R C 99 103.23R C 99 103.24R C 99 103.25R C 99 103.2

2R C 100 104.23R C 100 104.24R C 100 104.25R C 100 104.2

2R C 105 109.23R C 105 109.24R C 105 109.25R C 105 109.2

2R C 108 112.23R C 108 112.24R C 108 112.25R C 108 112.2

2R C 109 113.23R C 109 113.24R C 109 113.25R C 109 113.2


(Inch) 2R C 112 116.23R C 112 116.24R C 112 116.25R C 112 116.2

2R C 120 124.23R C 120 124.24R C 120 124.25R C 120 124.2

2R C 124 128.23R C 124 128.24R C 124 128.25R C 124 128.2

2R C 128 132.23R C 128 132.24R C 128 132.25R C 128 132.2

2R C 136 140.23R C 136 140.24R C 136 140.25R C 136 140.2

2R C 144 148.23R C 144 148.24R C 144 148.25R C 144 148.2

2R C 158 162.23R C 158 162.24R C 158 162.25R C 158 162.2

2R C 162 166.23R C 162 166.24R C 162 166.25R C 162 166.2

2R C 173 177.23R C 173 177.24R C 173 177.25R C 173 177.2

2R C 180 184.23R C 180 184.24R C 180 184.25R C 180 184.2

2R C 195 199.23R C 195 199.24R C 195 199.25R C 195 199.2

2R C 210 214.23R C 210 214.24R C 210 214.25R C 210 214.2

2R C 225 227.23R C 225 227.24R C 225 227.25R C 225 227.2


(Inch) 2R C 240 242.23R C 240 242.24R C 240 242.25R C 240 242.2

2R C 255 257.23R C 255 257.24R C 255 257.25R C 255 257.2

2R C 270 272.23R C 270 272.24R C 270 272.25R C 270 272.2

2R C 285 287.23R C 285 287.24R C 285 287.25R C 285 287.2

2R C 300 302.23R C 300 302.24R C 300 302.25R C 300 302.2

2R C 315 317.23R C 315 317.24R C 315 317.25R C 315 317.2

2R C 330 332.23R C 330 332.24R C 330 332.25R C 330 332.2

2R C 345 347.23R C 345 347.24R C 345 347.25R C 345 347.2

2R C 360 362.23R C 360 362.24R C 360 362.25R C 360 362.2

2R C 390 392.23R C 390 392.24R C 390 392.25R C 390 392.2

2R C 420 422.23R C 420 422.24R C 420 422.25R C 420 422.2

Conventional BandedConventional Banded

DBelt OutsideNo. Length

(Inch) 3R D 120 125.24R D 120 125.25R D 120 125.2

3R D 128 133.24R D 128 133.25R D 128 133.2

3R D 144 149.24R D 144 149.25R D 144 149.2

3R D 158 163.24R D 158 163.25R D 158 163.2

3R D 162 167.24R D 162 167.25R D 162 167.2

3R D 173 178.24R D 173 178.25R D 173 178.2

3R D 180 185.24R D 180 185.25R D 180 185.2

3R D 195 200.24R D 195 200.25R D 195 200.2

3R D 210 215.24R D 210 215.25R D 210 215.2


(Inch) 3R D 225 227.74R D 225 227.75R D 225 227.7

3R D 240 242.74R D 240 242.75R D 240 242.7

3R D 255 257.74R D 255 257.75R D 255 257.7

3R D 270 272.74R D 270 272.75R D 270 272.7

3R D 285 287.74R D 285 287.75R D 285 287.7

3R D 300 302.74R D 300 302.75R D 300 302.7

3R D 315 317.74R D 315 317.75R D 315 317.7

3R D 330 332.74R D 330 332.75R D 330 332.7

3R D 345 347.74R D 345 347.75R D 345 347.7


(Inch) 3R D 360 362.74R D 360 362.75R D 360 362.7

3R D 390 392.74R D 390 392.75R D 390 392.7

3R D 420 422.74R D 420 422.75R D 420 422.7

3R D 450 452.74R D 450 452.75R D 450 452.7

3R D 480 482.74R D 480 482.75R D 480 482.7

3R D 540 542.74R D 540 542.75R D 540 542.7

3R D 600 602.74R D 600 602.75R D 600 602.7

3R D 660 662.74R D 660 662.75R D 660 662.7

TOPWIDTH

PITCH BETWEEN

BELTS

THICKNESS

35

All the quality features and benefits of single belts - Plus.• Designed for tough applications where multiple drive belts are subject

to heavy shock and pulsating loads• Banding prevents belt whip, belt turnover, vibration and jumping off that may

occur with single belts in multiple drive applications.• Lateral rigidity keeps the belt running in a straight line as it enters the pulley

grooves during strong pulsating or shock loads for reduced wear.• Frictional and wedging principles of the V-Belt drive apply and prevent slip at

low tension and low bearing loads.

Triplex®Rawedge Cogged BandedTriplex® Rawedge Cogged Banded

3R = 3 RibsB = Cross SectionX = Rawedge Cogged Construction

144 = Nominal Length, 144.0 inches

3R BX 144Cross-Sectional Dimensions Product Code

BX CX

Belt Top Width Thickness Pitch Between BeltsSection W H E

(Inches) (Inches) (Inches)

B .66 .51 .75C .88 .63 1.00


(Inch) 2R BX 97 99.83R BX 97 99.84R BX 97 99.85R BX 97 99.8

2R BX 105 107.83R BX 105 107.84R BX 105 107.85R BX 105 107.8

2R BX 112 114.83R BX 112 114.84R BX 112 114.85R BX 112 114.8

2R BX 120 122.83R BX 120 122.84R BX 120 122.85R BX 120 122.8



2R BX 144 146.83R BX 144 146.84R BX 144 146.85R BX 144 146.8

2R BX 158 160.83R BX 158 160.84R BX 158 160.85R BX 158 160.8

2R BX 173 175.83R BX 173 175.84R BX 173 175.85R BX 173 175.8



2R BX 195 197.83R BX 195 197.84R BX 195 197.85R BX 195 197.8

2R BX 210 212.83R BX 210 212.84R BX 210 212.85R BX 210 212.8

2R BX 240 242.83R BX 240 242.84R BX 240 242.85R BX 240 242.8


(Inch) 2R CX 96 100.23R CX 96 100.24R CX 96 100.25R CX 96 100.2

2R CX 105 109.23R CX 105 109.24R CX 105 109.25R CX 105 109.2

2R CX 107 111.23R CX 107 111.24R CX 107 111.25R CX 107 111.2

2R CX 112 116.23R CX 112 116.24R CX 112 116.25R CX 112 116.2

2R CX 120 124.23R CX 120 124.24R CX 120 124.25R CX 120 124.2

2R CX 128 132.23R CX 128 132.24R CX 128 132.25R CX 128 132.2



2R CX 158 162.23R CX 158 162.24R CX 158 162.25R CX 158 162.2

2R CX 162 166.23R CX 162 166.24R CX 162 166.25R CX 162 166.2

2R CX 173 177.23R CX 173 177.24R CX 173 177.25R CX 173 177.2

2R CX 180 184.23R CX 180 184.24R CX 180 184.25R CX 180 184.2

2R CX 187 191.23R CX 187 191.24R CX 187 191.25R CX 187 191.2



2R CX 210 214.23R CX 210 214.24R CX 210 214.25R CX 210 214.2

2R CX 225 229.23R CX 225 229.24R CX 225 229.25R CX 225 229.2

2R CX 240 242.23R CX 240 242.24R CX 240 242.25R CX 240 242.2

36

3V • 3VXProduct Belt Length

Code (Inch)3V 250 25.03V 265 26.53V 280 28.03V 300 30.03V 315 31.5

3V 335 33.53V 355 35.53V 375 37.53V 400 40.03V 425 42.5

•3V 450 45.0•3V 475 47.5•3V 500 50.0•3V 530 53.0•3V 560 56.0

•3V 600 60.0•3V 630 63.0•3V 670 67.0•3V 710 71.0•3V 750 75.0

•3V 800 80.0•3V 850 85.0•3V 900 90.0•3V 950 95.0

•3V 1000 100.0

•3V 1060 106.0•3V 1120 112.0•3V 1180 118.0•3V 1250 125.0•3V 1320 132.0

•3V 1400 140.0

Product Belt LengthCode (Inch)

5V 500 50.05V 530 53.05V 560 56.05V 600 60.05V 630 63.0

5V 670 67.05V 710 71.05V 750 75.05V 800 80.05V 850 85.0

•5V 900 90.0•5V 950 95.0•5V 1000 100.0•5V 1060 106.0•5V 1120 112.0

•5V 1180 118.0•5V 1250 125.0•5V 1320 132.0•5V 1400 140.0•5V 1500 150.0

•5V 1600 160.0•5V 1700 170.0•5V 1800 180.0•5V 1900 190.0•5V 2000 200.0

•5V 2120 212.0•5V 2240 224.0•5V 2360 236.0•5V 2500 250.0•5V 2650 265.0

•5V 2800 280.0•5V 3000 300.0•5V 3150 315.0•5V 3350 335.0•5V 3550 355.0

5V • 5VXProduct Belt Length

Code (Inch)•8V 1000 100.0•8V 1060 106.0•8V 1120 112.0•8V 1180 118.0•8V 1250 125.0

•8V 1320 132.0•8V 1400 140.0•8V 1500 150.0•8V 1600 160.0•8V 1700 170.0

•8V 1800 180.0•8V 1900 190.0•8V 2000 200.0•8V 2120 212.0•8V 2240 224.0

•8V 2360 236.0•8V 2500 250.0•8V 2600 260.0•8V 2800 280.0•8V 3000 300.0

•8V 3150 315.0•8V 3350 335.0•8V 3550 355.0•8V 3750 375.0•8V 4000 400.0

•8V 4250 425.0•8V 4500 450.0•8V 4750 475.0•8V 5000 500.0•8V 5600 560.0

•8V 6000 600.0

8V

With its unique narrow width, the V-Belt has high powertransmission capability.• Energy-saving and compact design application.• Possible to operate with maximum speed of 40m/sec.• Excellent heat resistance and antistatic property.• Our “set-free” system for multiple belt usage is very effective to reduce

dimensional differences of each belt.

Maxstar Wedge Supreme®

Maxstar Wedge® V-BeltMaxstar Wedge Supreme®

Maxstar Wedge® V-Belt

Comparison with Standard Belt

Product Code

Standard Belt Sizes

(9.5mm)3/8”

(9.5mm)3/8”

(15.9mm)5/8”

(15.9mm)5/8”

(25.4mm)1”

(22.2mm)7/8”

(13.5mm)17/32

(8.7mm)11/32 17/32

(13.5mm)5/16(7.9mm)

(MAXSTAR WEDGE V-Belt)

(Standard V-Belt)

(Note) Above are nominal values.

• signifies availability of Multi type MAXSTAR WEDGE Belt. Standard number of ribs is 2, 3, 4, 5 for all types (3V, 5V, 8V). We manufacture only standard sizes.: Corresponding sizes for Raw Edge cogged Type “MAXSTAR WEDGE SUPREME” 3VX and 5VX.

TOPWIDTH

THICKNESS3V 3V 3V

37

3VBelt Outside LengthNo. (Inch)

2R 3V 450 45.03R 3V 450 45.04R 3V 450 45.05R 3V 450 45.0

2R 3V 475 47.53R 3V 475 47.54R 3V 475 47.55R 3V 475 47.5

2R 3V 500 50.03R 3V 500 50.04R 3V 500 50.05R 3V 500 50.0

2R 3V 530 53.03R 3V 530 53.04R 3V 530 53.05R 3V 530 53.0

2R 3V 560 56.03R 3V 560 56.04R 3V 560 56.05R 3V 560 56.0

2R 3V 600 60.03R 3V 600 60.04R 3V 600 60.05R 3V 600 60.0

2R 3V 630 63.03R 3V 630 63.04R 3V 630 63.05R 3V 630 63.0

Belt Outside LengthNo. (Inch)

2R 3V 670 67.03R 3V 670 67.04R 3V 670 67.05R 3V 670 67.0

2R 3V 710 71.03R 3V 710 71.04R 3V 710 71.05R 3V 710 71.0

2R 3V 750 75.03R 3V 750 75.04R 3V 750 75.05R 3V 750 75.0

2R 3V 800 80.03R 3V 800 80.04R 3V 800 80.05R 3V 800 80.0

2R 3V 850 85.03R 3V 850 85.04R 3V 850 85.05R 3V 850 85.0

2R 3V 900 90.03R 3V 900 90.04R 3V 900 90.05R 3V 900 90.0

2R 3V 950 95.03R 3V 950 95.04R 3V 950 95.05R 3V 950 95.0

Belt Outside LengthNo. (Inch)

2R 3V 1000 100.03R 3V 1000 100.04R 3V 1000 100.05R 3V 1000 100.0

2R 3V 1060 106.03R 3V 1060 106.04R 3V 1060 106.05R 3V 1060 106.0

2R 3V 1120 112.03R 3V 1120 112.04R 3V 1120 112.05R 3V 1120 112.0

2R 3V 1180 118.03R 3V 1180 118.04R 3V 1180 118.05R 3V 1180 118.0

2R 3V 1250 125.03R 3V 1250 125.04R 3V 1250 125.05R 3V 1250 125.0

2R 3V 1320 132.03R 3V 1320 132.04R 3V 1320 132.05R 3V 1320 132.0

2R 3V 1400 140.03R 3V 1400 140.04R 3V 1400 140.05R 3V 1400 140.0

All the quality features and benefits of single belts - Plus.• Designed for tough applications where multiple drive belts are subject to heavy

shock and pulsating loads.• Banding prevents belt whip, belt turnover, vibration and jumping off that may occur

with single belts in multiple drive applications.• Lateral rigidity keeps the belt running in a straight line as it enters the pulley

grooves during strong pulsating or shock loads for reduced wear.• Frictional and wedging principles of the V-Belt drive apply and prevent slip at low

tension and low bearing loads.

Maxstar Wedge® Narrow BandedMaxstar Wedge® Narrow Banded

Product Code 4R = 4 Ribs 3V = Cross Section1320 = Outside Length, 132.0 inches

4R 3V 1320Cross-Sectional Dimensions

Top Width ThicknessW H

Belt Section (Inches) (Inches)

3V 3/8 5/165V 5/8 17/328V 1 7/8

38

5V 8V

Maxstar Wedge®

Narrow BandedMaxstar Wedge®

Narrow Banded


(Inch) 2R 5V 630 63.03R 5V 630 63.04R 5V 630 63.05R 5V 630 63.0

2R 5V 670 67.03R 5V 670 67.04R 5V 670 67.05R 5V 670 67.0

2R 5V 710 71.03R 5V 710 71.04R 5V 710 71.05R 5V 710 71.0

2R 5V 750 75.03R 5V 750 75.04R 5V 750 75.05R 5V 750 75.0

2R 5V 800 80.03R 5V 800 80.04R 5V 800 80.05R 5V 800 80.0

2R 5V 850 85.03R 5V 850 85.04R 5V 850 85.05R 5V 850 85.0

2R 5V 900 90.03R 5V 900 90.04R 5V 900 90.05R 5V 900 90.0

2R 5V 950 95.03R 5V 950 95.04R 5V 950 95.05R 5V 950 95.0

2R 5V 1000 100.03R 5V 1000 100.04R 5V 1000 100.05R 5V 1000 100.0

2R 5V 1060 106.03R 5V 1060 106.04R 5V 1060 106.05R 5V 1060 106.0

2R 5V 1120 112.03R 5V 1120 112.04R 5V 1120 112.05R 5V 1120 112.0


(Inch) 2R 5V 1180 118.03R 5V 1180 118.04R 5V 1180 118.05R 5V 1180 118.0

2R 5V 1250 125.03R 5V 1250 125.04R 5V 1250 125.05R 5V 1250 125.0

2R 5V 1320 132.03R 5V 1320 132.04R 5V 1320 132.05R 5V 1320 132.0

2R 5V 1400 140.03R 5V 1400 140.04R 5V 1400 140.05R 5V 1400 140.0

2R 5V 1500 150.03R 5V 1500 150.04R 5V 1500 150.05R 5V 1500 150.0

2R 5V 1600 160.03R 5V 1600 160.04R 5V 1600 160.05R 5V 1600 160.0

2R 5V 1700 170.03R 5V 1700 170.04R 5V 1700 170.05R 5V 1700 1700

2R 5V 1800 180.03R 5V 1800 180.04R 5V 1800 180.05R 5V 1800 180.0

2R 5V 1900 190.03R 5V 1900 190.04R 5V 1900 190.05R 5V 1900 190.0

2R 5V 2000 200.03R 5V 2000 200.04R 5V 2000 200.05R 5V 2000 200.0

2R 5V 2120 212.03R 5V 2120 212.04R 5V 2120 212.05R 5V 2120 212.0


(Inch) 2R 5V 2240 224.03R 5V 2240 224.04R 5V 2240 224.05R 5V 2240 224.0

2R 5V 2360 236.03R 5V 2360 236.04R 5V 2360 236.05R 5V 2360 236.0

2R 5V 2500 250.03R 5V 2500 250.04R 5V 2500 250.05R 5V 2500 250.0

2R 5V 2650 265.03R 5V 2650 265.04R 5V 2650 265.05R 5V 2650 265.0

2R 5V 2800 280.03R 5V 2800 280.04R 5V 2800 280.05R 5V 2800 280.0

2R 5V 3000 300.03R 5V 3000 300.04R 5V 3000 300.05R 5V 3000 300.0

2R 5V 3150 315.03R 5V 3150 315.04R 5V 3150 315.05R 5V 3150 315.0

2R 5V 3350 335.03R 5V 3350 335.04R 5V 3350 335.05R 5V 3350 335.0

2R 5V 3550 355.03R 5V 3550 355.04R 5V 3550 355.05R 5V 3550 355.0


(Inch) 3R 8V 1000 100.04R 8V 1000 100.05R 8V 1000 100.0

3R 8V 1060 106.04R 8V 1060 106.05R 8V 1060 106.0

3R 8V 1120 112.04R 8V 1120 112.05R 8V 1120 112.0

3R 8V 1180 118.04R 8V 1180 118.05R 8V 1180 118.0

3R 8V 1250 125.04R 8V 1250 125.05R 8V 1250 125.0

3R 8V 1320 132.04R 8V 1320 132.05R 8V 1320 132.0

3R 8V 1400 140.04R 8V 1400 140.05R 8V 1400 140.0

3R 8V 1500 150.04R 8V 1500 150.05R 8V 1500 150.0

3R 8V 1600 160.04R 8V 1600 160.05R 8V 1600 160.0

3R 8V 1700 170.04R 8V 1700 170.05R 8V 1700 170.0


(Inch) 3R 8V 1800 180.04R 8V 1800 180.05R 8V 1800 180.0

3R 8V 1900 190.04R 8V 1900 190.05R 8V 1900 190.0

3R 8V 2000 200.04R 8V 2000 200.05R 8V 2000 200.0

3R 8V 2120 212.04R 8V 2120 212.05R 8V 2120 212.0

3R 8V 2240 224.04R 8V 2240 224.05R 8V 2240 224.0

3R 8V 2360 236.04R 8V 2360 236.05R 8V 2360 236.0

3R 8V 2500 250.04R 8V 2500 250.05R 8V 2500 250.0

3R 8V 2650 265.04R 8V 2650 265.05R 8V 2650 265.0

3R 8V 2800 280.04R 8V 2800 280.05R 8V 2800 280.0

3R 8V 3000 300.04R 8V 3000 300.05R 8V 3000 300.0


(Inch) 3R 8V 3150 315.04R 8V 3150 315.05R 8V 3150 315.0

3R 8V 3350 335.04R 8V 3350 335.05R 8V 3350 335.0

3R 8V 3550 355.04R 8V 3550 355.05R 8V 3550 355.0

3R 8V 3700 370.04R 8V 3700 370.05R 8V 3700 370.0

3R 8V 4000 400.04R 8V 4000 400.05R 8V 4000 400.0

3R 8V 4250 425.04R 8V 4250 425.05R 8V 4250 425.0

3R 8V 4500 450.04R 8V 4500 450.05R 8V 4500 450.0

3R 8V 4750 475.04R 8V 4750 475.05R 8V 4750 475.0

3R 8V 5000 500.04R 8V 5000 500.05R 8V 5000 500.0

39

Product Code 3R = 3 Ribs 3V = Cross Section1600 = Outside Length,

160 inches

3R 5VK 1600

All the quality features and benefits of single belts - Plus.

• Designed for extra heavy duty applications.• Aramid cords with bareback fablic for clutch effect.• Reduced Belt stretch under heavy loads and torque.• High working loads, high shock loads.

Multi Super Wedge IIMulti Super Wedge IINEW!

5VKBelt OutsideNo. Length

(Inch)


(Inch)


(Inch)


(Inch)


(Inch)2R5VK630 63.0 2R5VK900 90.0 2R5VK1320 132.0 2R5VK2000 200.0 2R5VK2800 280.03R5VK630 63.0 3R5VK900 90.0 3R5VK1320 132.0 3R5VK2000 200.0 3R5VK2800 280.04R5VK630 63.0 4R5VK900 90.0 4R5VK1320 132.0 4R5VK2000 200.0 4R5VK2800 280.05R5VK630 63.0 5R5VK900 90.0 5R5VK1320 132.0 5R5VK2000 200.0 5R5VK2800 280.0

2R5VK670 67.0 2R5VK950 95.0 2R5VK1400 140.0 2R5VK2030 203.0 2R5VK3000 300.03R5VK670 67.0 3R5VK950 95.0 3R5VK1400 140.0 3R5VK2030 203.0 3R5VK3000 300.04R5VK670 67.0 4R5VK950 95.0 4R5VK1400 140.0 4R5VK2030 203.0 4R5VK3000 300.05R5VK670 67.0 5R5VK950 95.0 5R5VK1400 140.0 5R5VK2030 203.0 5R5VK3000 300.0




2R5VK850 85.0 2R5VK1180 118.0 2R5VK1800 180.0 2R5VK2500 250.03R5VK850 85.0 3R5VK1180 118.0 3R5VK1800 180.0 3R5VK2500 250.04R5VK850 85.0 4R5VK1180 118.0 4R5VK1800 180.0 4R5VK2500 250.05R5VK850 85.0 5R5VK1180 118.0 5R5VK1800 180.0 5R5VK2500 250.0


40

Multi Super Wedge IIMulti Super Wedge II


(Inch)


(Inch)


(Inch)


(Inch)


(Inch)2R8VK1000 100.0 2R8VK1500 150.0 2R8VK2240 224.0 2R8VK3350 335.0 2R8VK5000 500.03R8VK1000 100.0 3R8VK1500 150.0 3R8VK2240 224.0 3R8VK3350 335.0 3R8VK5000 500.04R8VK1000 100.0 4R8VK1500 150.0 4R8VK2240 224.0 4R8VK3350 335.0 4R8VK5000 500.05R8VK1000 100.0 5R8VK1500 150.0 5R8VK2240 224.0 5R8VK3350 335.0 5R8VK5000 500.0







15.9mm5/8 inch

13.5mm17/32 inch5VX 5VX 5VX

41

Maxstar WedgeSupreme®

Narrow Cogged BandedMaxstar WedgeSupreme®

Narrow Cogged Banded

Product CodeCross-Sectional Dimensions 4R = 4 Ribs 5V = Cross SectionX = Rawedge Cogged Construction

1320 = Outside Length, 132.0 inches

4R 5V X 1320

All the quality features and benefits of single belts - Plus.• Designed for tough applications where multiple drive belts are subject to heavy

shock and pulsating loads.• Banding prevents belt whip, belt turnover, vibration and jumping off that may occur

with single belts in multiple drive applications.• Lateral rigidity keeps the belt running in a straight line as it enters the pulley

grooves during strong pulsating or shock loads for reduced wear.• Frictional and wedging principles of the V-Belt drive apply and prevent slip at low

bearing loads.


(Inch)


(Inch)


(Inch)


(Inch)


(Inch)2R3VX375 37.5 2R3VX600 60.0 2R5VX500 50.0 2R5VX1000 100.0 2R5VX1700 170.03R3VX375 37.5 3R3VX600 60.0 3R5VX500 50.0 3R5VX1000 100.0 3R5VX1700 170.04R3VX375 37.5 4R3VX600 60.0 4R5VX1000 100.0 4R5VX1700 170.05R3VX375 37.5 5R3VX600 60.0 2R5VX530 53.0 5R5VX1000 100.0 5R5VX1700 170.0

3R5VX530 53.02R3VX400 40.0 2R3VX630 63.0 2R5VX1060 106.0 2R5VX1800 180.03R3VX400 40.0 3R3VX630 63.0 2R5VX560 56.0 3R5VX1060 106.0 3R5VX1800 180.04R3VX400 40.0 4R3VX630 63.0 3R5VX560 56.0 4R5VX1060 106.0 4R5VX1800 180.05R3VX400 40.0 5R3VX630 63.0 5R5VX1060 106.0 5R5VX1800 180.0

2R5VX600 60.02R3VX425 42.5 2R3VX670 67.0 3R5VX600 60.0 2R5VX1120 112.0 2R5VX1900 190.03R3VX425 42.5 3R3VX670 67.0 3R5VX1120 112.0 3R5VX1900 190.04R3VX425 42.5 4R3VX670 67.0 2R5VX630 63.0 4R5VX1120 112.0 4R5VX1900 190.05R3VX425 42.5 5R3VX670 67.0 3R5VX630 63.0 5R5VX1120 112.0 5R5VX1900 190.0

2R3VX450 45.0 2R3VX710 71.0 2R5VX670 67.0 2R5VX1180 118.0 2R5VX2000 200.03R3VX450 45.0 3R3VX710 71.0 3R5VX670 67.0 3R5VX1180 118.0 3R5VX2000 200.04R3VX450 45.0 4R3VX710 71.0 4R5VX1180 118.0 4R5VX2000 200.05R3VX450 45.0 5R3VX710 71.0 2R5VX710 71.0 5R5VX1180 118.0 5R5VX2000 200.0

3R5VX710 71.02R3VX475 47.5 2R3VX750 75.0 2R5VX1250 125.03R3VX475 47.5 3R3VX750 75.0 2R5VX750 75.0 3R5VX1250 125.04R3VX475 47.5 4R3VX750 75.0 3R5VX750 75.0 4R5VX1250 125.05R3VX475 47.5 5R3VX750 75.0 5R5VX1250 125.0

2R5VX800 80.02R3VX490 49.0 2R3VX800 80.0 3R5VX800 80.0 2R5VX1320 132.03R3VX490 49.0 3R3VX800 80.0 3R5VX1320 132.04R3VX490 49.0 4R3VX800 80.0 2R5VX850 85.0 4R5VX1320 132.05R3VX490 49.0 5R3VX800 80.0 3R5VX850 85.0 5R5VX1320 132.0

2R3VX500 50.0 2R3VX850 85.0 2R5VX900 90.0 2R5VX1400 140.03R3VX500 50.0 3R3VX850 85.0 3R5VX900 90.0 3R5VX1400 140.04R3VX500 50.0 4R3VX850 85.0 4R5VX1400 140.05R3VX500 50.0 5R3VX850 85.0 2R5VX950 95.0 5R5VX1400 140.0

3R5VX950 95.02R3VX530 53.0 2R3VX900 90.0 2R5VX1500 150.03R3VX530 53.0 3R3VX900 90.0 3R5VX1500 150.04R3VX530 53.0 4R3VX900 90.0 4R5VX1500 150.05R3VX530 53.0 5R3VX900 90.0 5R5VX1500 150.0

2R3VX560 56.0 2R3VX950 95.03R3VX560 56.0 3R3VX950 95.04R3VX560 56.0 4R3VX950 95.05R3VX560 56.0 5R3VX950 95.0

5VK

9.5mm3/8in

12.7mm1/2in

16.5mm21/32in

9.5mm3/8in7.9mm

5/16in5.5mm7/32in3L 4L 5L

42

• Designed for light duty, fractional horsepower drives.• Capable of handling drives with backside idler.• External wrapping provides a smooth and quiet operation with minimum vibration.• Heat and oil resistant, static conductive.

FHP V-BeltFHP V-Belt

Product CodeCross-Sectional Dimensions 4L = Cross Section380 = Outside Length, 38.0 inches4L 380

3LBelt OutsideNo. Length

(Inch)


(Inch)3L 110 11.03L 120 12.03L 130 13.03L 140 14.03L 150 15.03L 160 16.03L 170 17.03L 180 18.03L 190 19.03L 200 20.03L 210 21.03L 220 22.03L 230 23.03L 240 24.03L 250 25.03L 260 26.03L 270 27.03L 280 28.03L 290 29.03L 300 30.03L 310 31.03L 320 32.03L 330 33.03L 340 34.03L 350 35.03L 360 36.03L 370 37.03L 380 38.03L 390 39.03L 400 40.03L 410 41.03L 420 42.03L 430 43.03L 440 44.03L 450 45.03L 460 46.03L 470 47.03L 480 48.03L 490 49.03L 500 50.03L 510 51.03L 520 52.03L 530 53.0

3L 540 54.03L 550 55.03L 560 56.03L 570 57.03L 580 58.03L 590 59.03L 600 60.03L 610 61.03L 620 62.03L 630 63.03L 640 64.03L 650 65.03L 660 66.03L 670 67.03L 680 68.03L 690 69.03L 700 70.03L 710 71.03L 720 72.03L 730 73.03L 740 74.0

4L 150 15.04L 160 16.04L 170 17.04L 180 18.04L 190 19.04L 200 20.04L 210 21.04L 220 22.04L 230 23.04L 240 24.04L 250 25.04L 260 26.04L 270 27.04L 280 28.04L 290 29.04L 300 30.04L 310 31.04L 320 32.04L 330 33.04L 340 34.04L 350 35.04L 360 36.04L 370 37.04L 380 38.04L 390 39.04L 400 40.04L 410 41.04L 420 42.04L 430 43.04L 440 44.04L 450 45.04L 460 46.04L 470 47.04L 480 48.04L 490 49.04L 500 50.04L 510 51.04L 520 52.04L 530 53.04L 540 54.04L 550 55.04L 560 56.04L 570 57.04L 580 58.04L 590 59.0

4L 600 60.04L 610 61.04L 620 62.04L 630 63.04L 640 64.04L 650 65.04L 660 66.04L 670 67.04L 680 68.04L 690 69.04L 700 70.04L 710 71.04L 720 72.04L 730 73.04L 740 74.04L 750 75.04L 760 76.04L 770 77.04L 780 78.04L 790 79.04L 800 80.04L 810 81.04L 820 82.04L 830 83.04L 840 84.04L 850 85.04L 860 86.04L 870 87.04L 880 88.04L 890 89.04L 900 90.04L 910 91.04L 920 92.04L 930 93.04L 940 94.04L 950 95.04L 960 96.04L 970 97.04L 980 98.04L 990 99.04L 1000 100.0

4L 5L

5L 230 23.05L 240 24.05L 250 25.05L 260 26.05L 270 27.05L 280 28.05L 290 29.05L 300 30.05L 310 31.05L 320 32.05L 330 33.05L 340 34.05L 350 35.05L 360 36.05L 370 37.05L 380 38.05L 390 39.05L 400 40.05L 410 41.05L 420 42.05L 430 43.05L 440 44.05L 450 45.05L 460 46.05L 470 47.05L 480 48.05L 490 49.05L 500 50.05L 510 51.05L 520 52.05L 530 53.05L 540 54.05L 550 55.05L 560 56.05L 570 57.05L 580 58.05L 590 59.05L 600 60.05L 610 61.05L 620 62.05L 630 63.05L 640 64.05L 650 65.05L 660 66.0

5L 670 67.05L 680 68.05L 690 69.05L 700 70.05L 710 71.05L 720 72.05L 730 73.05L 740 74.05L 750 75.05L 760 76.05L 770 77.05L 780 78.05L 790 79.05L 800 80.05L 810 81.05L 820 82.05L 830 83.05L 840 84.05L 850 85.05L 860 86.05L 870 87.05L 880 88.05L 890 89.05L 900 90.05L 910 91.05L 920 92.05L 930 93.05L 940 94.05L 950 95.05L 960 96.05L 970 97.05L 980 98.05L 990 99.05L 1000 100.0


(Inch)


(Inch)


(Inch)


(Inch)

9.5mm3/8in

12.7mm1/2in

16.5mm21/32in

9.5mm3/8in7.9mm

5/16in5.5mm7/32in

3LK 4LK 5LK

43

• For severe operating conditions where light duty FHP belts may stretch or pull apart due to heavy shock loads.

• Aramid fiber is used in the tensile cord for length stability.• Provide greater horsepower than light duty FHP belts.• Special outer covering designed for smooth clutching and backside idler applications.• Resist temperatures extremes, high humidity, oil and cracking.

MBL Super KB®

Premium FHP BeltMBL Super KB®

Premium FHP Belt

Product CodeCross-Sectional Dimensions 4L = Cross Section K = Aramid Fiber Cord

380 = Outside Length, 38.0 inches4L K 380

3LKBelt OutsideNo. Length

(Inch)


(Inch)3LK 200 20.03LK 210 21.03LK 220 22.03LK 230 23.03LK 240 24.03LK 250 25.03LK 260 26.03LK 270 27.03LK 280 28.03LK 290 29.03LK 300 30.03LK 310 31.03LK 320 32.03LK 330 33.03LK 340 34.03LK 350 35.03LK 360 36.03LK 370 37.03LK 380 38.03LK 390 39.03LK 400 40.0

3LK 410 41.03LK 420 42.03LK 430 43.03LK 440 44.03LK 450 45.03LK 460 46.03LK 470 47.03LK 480 48.03LK 490 49.03LK 500 50.03LK 510 51.03LK 520 52.03LK 530 53.03LK 540 54.03LK 550 55.03LK 560 56.03LK 570 57.03LK 580 58.03LK 590 59.03LK 600 60.03LK 610 61.03LK 620 62.03LK 630 63.0

4LK 200 20.04LK 210 21.04LK 220 22.04LK 230 23.04LK 240 24.04LK 250 25.04LK 260 26.04LK 270 27.04LK 280 28.04LK 290 29.04LK 300 30.04LK 310 31.04LK 320 32.04LK 330 33.04LK 340 34.04LK 350 35.04LK 360 36.04LK 370 37.04LK 380 38.04LK 390 39.04LK 400 40.04LK 410 41.04LK 420 42.04LK 430 43.04LK 440 44.04LK 450 45.04LK 460 46.04LK 470 47.04LK 480 48.04LK 490 49.04LK 500 50.04LK 510 51.04LK 520 52.04LK 530 53.04LK 540 54.04LK 550 55.04LK 560 56.04LK 570 57.04LK 580 58.0

4LK 590 59.04LK 600 60.04LK 610 61.04LK 620 62.04LK 630 63.04LK 640 64.04LK 650 65.04LK 660 66.04LK 670 67.04LK 680 68.04LK 690 69.04LK 700 70.04LK 710 71.04LK 720 72.04LK 730 73.04LK 740 74.04LK 750 75.04LK 760 76.04LK 770 77.04LK 780 78.04LK 790 79.04LK 800 80.04LK 810 81.04LK 820 82.04LK 830 83.04LK 840 84.04LK 850 85.04LK 860 86.04LK 870 87.04LK 880 88.04LK 890 89.04LK 900 90.04LK 910 91.04LK 920 92.04LK 930 93.04LK 940 94.04LK 950 95.04LK 960 96.04LK 970 97.04LK 980 98.04LK 990 99.04LK 1000 100.0

4LK 5LK

5LK 240 24.05LK 250 25.05LK 260 26.05LK 270 27.05LK 280 28.05LK 290 29.05LK 300 30.05LK 310 31.05LK 320 32.05LK 330 33.05LK 340 34.05LK 350 35.05LK 360 36.05LK 370 37.05LK 380 38.05LK 390 39.05LK 400 40.05LK 410 41.05LK 420 42.05LK 430 43.05LK 440 44.05LK 450 45.05LK 460 46.05LK 470 47.05LK 480 48.05LK 490 49.05LK 500 50.05LK 510 51.05LK 520 52.05LK 530 53.05LK 540 54.05LK 550 55.05LK 560 56.05LK 570 57.05LK 580 58.05LK 590 59.05LK 600 60.05LK 610 61.05LK 620 62.05LK 630 63.05LK 640 64.05LK 650 65.05LK 660 66.05LK 670 67.0

5LK 680 68.05LK 690 69.05LK 700 70.05LK 710 71.05LK 720 72.05LK 730 73.05LK 740 74.05LK 750 75.05LK 760 76.05LK 770 77.05LK 780 78.05LK 790 79.05LK 800 80.05LK 810 81.05LK 820 82.05LK 830 83.05LK 840 84.05LK 850 85.05LK 860 86.05LK 870 87.05LK 880 88.05LK 890 89.05LK 900 90.05LK 910 91.05LK 920 92.05LK 930 93.05LK 940 94.05LK 950 95.05LK 960 96.05LK 970 97.05LK 980 98.05LK 990 99.05LK 1000 100.0


(Inch)


(Inch)


(Inch)


(Inch)

44

Suitable for energy-saving / compact design.Reduces maintenance costs.

Narrow V-Belt forDIN 7753/ISO4184Narrow V-Belt forDIN 7753/ISO4184


Standard Belt Sizes

Product Code

9.7mm

SPZPitch Length Pitch Length

LW (mm) LW (mm)

487 1112512 1120562 1137587 1140612 1162630 1180637 1187650 1200655 1202662 1212665 1222670 1237687 1250690 1262710 1270722 1282737 1287750 1300760 1312762 1320772 1337787 1340800 1347812 1362825 1387835 1400837 1412850 1420862 1437875 1462885 1487887 1500900 1512912 1520925 1537937 1560940 1562950 1587962 1600987 16121000 16371005 16621010 16871012 17001024 17371037 17621047 17871060 18001077 18121080 18371087 18621100 11871110 1900

Pitch Length Pitch LengthLW (mm) LW (mm)

SPAPitch Length Pitch Length

LW (mm) LW (mm)Pitch Length

LW (mm)

SPBPitch Length Pitch Length

LW (mm) LW (mm)Pitch Length

LW (mm)

1937 34501987 35502000 36602030 37502037 40002050 450020602082208721202137215021602187220022402262228022872300233723602387240024102437245024872500254025802600263726502670268726902700271227202737276028002840290030003050307031503170320032503350

732 1407 2360735 1410 2373742 1425 2382757 1432 2407760 1457 2410782 1482 2432800 1485 2482803 1500 2500832 1507 2532850 1532 2550857 1557 2568860 1582 2582882 1600 2600885 1617 2607900 1632 2632907 1657 2650932 1682 2682950 1700 2732957 1707 2773967 1732 2782982 1757 28001000 1782 28321007 1785 28471032 1800 28501057 1807 28821060 1832 29001082 1837 29321090 1857 29621107 1882 29821120 1900 30001132 1907 30321157 1932 30821180 1957 31321182 1982 31501200 2000 31821207 2032 32821210 2057 33501232 2082 33821235 2100 34821250 2120 35001257 2132 35501272 2157 36501282 2182 37501295 2200 38701300 2207 40001307 2232 41201320 2240 42501332 2260 43001357 2282 45001367 2300 46001382 2307 47501385 2330 48651400 2332 5000

1250 2680 48701260 2700 50001320 2720 50701340 2750 53001400 2800 53801410 2820 55001500 2840 56001510 2900 56801590 2990 58001600 3000 59901690 3070 60001700 3150 63001750 3170 63401800 3175 67001850 3200 67201900 32381950 32502000 32802020 33282030 33402060 33502120 34002131 34122137 34252150 34502180 35002200 35502240 36502264 36752280 37002300 37502310 37702320 38002330 38502360 38702390 38752391 40002410 40602425 41002430 41202450 42502473 42602500 42962518 43102522 43182530 43702550 45002575 45602580 46002600 46202640 47202650 47502670 4820

up to10000

SPCPitch Length Pitch Length

LW (mm) LW (mm)

2000 43802120 44002240 44202280 44452335 44502360 45002400 45302413 46502445 47202500 47502550 48502580 49002600 49702650 50002700 50302720 50702750 52002770 53002800 53302840 54002900 55002950 56003000 57003050 60003100 62003150 63003200 64803220 65003320 6700335033753420343034503500352035503600362036703700375037703800381039704000405041004200425043004350

All dimensions are nominal value.

: Available sizes for raw edge cogged belt SPZX, SPAX, SPBX, SPCX.

up to12500

12.7mm

16.3mm 22.0mm

8.0mm 10.0mm 13.0mm 18.0mm

45

AABelt OutsideNo. Length

(Inch)


(Inch)AA 51 54.4AA 55 58.4AA 60 63.4AA 62 65.4AA 64 67.4AA 66 69.4AA 68 71.4AA 70 73.4AA 73 76.4AA 75 78.4AA 78 81.4

AA 80 83.4AA 84 87.4AA 85 88.4AA 90 93.4AA 92 95.4AA 96 99.4AA 105 108.4AA 107 110.4AA 112 115.4AA 120 123.4AA 128 131.4

BB 43 47.6BB 45 49.6BB 51 55.6BB 53 57.6BB 54 58.6BB 55 59.6BB 60 64.6BB 68 72.6BB 71 75.6BB 72 76.6BB 73 77.6 BB 74 78.6BB 75 79.6BB 76 80.6BB 77 81.6BB 78 82.6BB 81 85.6 BB 83 87.6BB 85 89.6BB 90 94.6BB 92 96.6BB 93 97.6BB 94 98.6BB 95 99.6BB 96 100.6BB 97 101.6

BB 103 107.6BB 105 109.6BB 107 111.6BB 108 112.6BB 111 115.6BB 112 116.6BB 116 120.6BB 117 121.6BB 118 122.6BB 119 123.6BB 120 124.6BB 123 127.6BB 124 128.6BB 128 132.6BB 129 133.6BB 130 134.6BB 136 140.6BB 140 144.6BB 144 148.6

BB 155 159.6BB 157 161.6BB 158 162.6BB 162 166.6BB 168 172.6BB 169 173.6BB 173 177.6BB 180 184.6BB 182 186.6BB 190 194.6BB 195 199.6BB 210 214.6BB 225 228.1BB 226 229.1BB 228 231.1BB 230 233.1BB 240 243.1BB 255 258.1BB 267 270.1BB 270 273.1BB 273 276.1BB 277 280.1BB 278 281.1BB 285 288.1BB 300 303.1BB 330 333.1

BB CC

CC 75 81.4CC 81 87.4CC 85 91.4CC 90 96.4CC 96 102.4

CC 105 111.4CC 112 118.4CC 119 125.4CC 120 126.4CC 125 131.4CC 128 134.4CC 136 142.4CC 144 150.4CC 148 154.4CC 158 164.4

CC 162 168.4CC 173 179.4CC 180 186.4CC 195 201.4CC 210 216.4CC 221 227.4CC 225 229.4CC 240 244.4CC 255 259.4CC 270 274.4CC 300 304.4CC 330 334.4CC 360 364.4CC 390 394.4CC 420 424.4


(Inch)


(Inch)

• For drives where power must be transmitted by both the top and bottom of the belt.• Belts flex equally well in both directions for positive pulley contact.• Good for serpentine or reverse bend drives.• Oil and heat resistant, static conductive.

Double Angle BeltDouble Angle Belt

Product Code AA = Double Angle A Section105 = Nominal Length, 105 inchesAA 105

TW HAA 1/2 in - 12.7 mm 13/32 in - 10.3 mmBB 21/32 in - 16.7 mm 17/32 in - 13.5 mmCC 7/8 in - 22.2 mm 11/16 in - 17.5 mm


(Inch)


(Inch)

46


SignBelt Type J L PK

Cross-Sectional Diagram

Standard Belt Sizes for Industrial RIBSTAR Belt

Product Code (Example) For PK type, the metric system is used

• Effective Length: Effective outer perimeter

a 2.34XN 4.70XN 3.56XNb 3.80 7.50 5.00P 2.34 4.70 3.56

40 40 40

This belt combines the properties of the V-Belt’s high powertransmission capability and the Flat Belt flexibility.• High-efficiency operation at high speed.• It can be used on a small diameter pulley because of its enhanced flexibility.• Excellent heat resistance and abrasion resistance.• Compact design application.• Little belt vibration.

Ribstar® Belt G (Rubber V-Ribbed Belt)Ribstar® Belt G (Rubber V-Ribbed Belt)

(Unit: mm)

• N: No of Ribs

* signifies made-to-order size.

JProduct Effective

Code Length (inch)Product Effective



Code Length (inch)

180 J 18.0190 J 19.0200 J 20.0210 J 21.0220 J 22.0235 J 23.5240 J 24.0245 J 24.5250 J 25.0260 J 26.0270 J 27.0280 J 28.0290 J 29.0300 J 30.0310 J 31.0315 J 31.5320 J 32.0330 J 33.0340 J 34.0345 J 34.5350 J 35.0

360 J 36.0370 J 37.0375 J 37.5380 J 38.0390 J 39.0400 J 40.0410 J 41.0420 J 42.0430 J 43.0440 J 44.0450 J 45.0460 J 46.0480 J 48.0490 J 49.0510 J 51.0530 J 53.0550 J 55.0580 J 58.0610 J 61.0650 J 65.0730 J 73.0

345 L 34.5350 L 35.0355 L 35.5360 L 36.0370 L 37.0375 L 37.5380 L 38.0385 L 38.5390 L 39.0395 L 39.5400 L 40.0405 L 40.5410 L 41.0415 L 41.5420 L 42.0425 L 42.5430 L 43.0450 L 45.0460 L 46.0480 L 48.0500 L 50.0540 L 54.0560 L 56.0565 L 56.5570 L 57.0600 L 60.0615 L 61.5635 L 63.5650 L 65.0655 L 65.5675 L 67.5680 L 68.0690 L 69.0725 L 72.5750 L 75.0765 L 76.5780 L 78.0815 L 81.5

* 835 L 83.5* 845 L 84.5* 865 L 86.5* 880 L 88.0* 915 L 91.5* 930 L 93.0* 975 L 97.5* 990 L 99.0

* 1065 L 106.5* 1120 L 112.0* 1150 L 115.0

L

PK 600 600PK 615 615PK 630 630PK 650 650PK 690 690PK 710 710PK 730 730PK 750 750PK 775 775PK 800 800PK 825 825PK 850 850PK 875 875PK 900 900PK 925 925PK 950 950PK 975 975PK 1000 1,000PK 1030 1,030PK 1060 1,060PK 1090 1,090PK 1120 1,120PK 1150 1,150PK 1180 1,180PK 1220 1,220PK 1250 1,250PK 1280 1,280PK 1320 1,320PK 1360 1,360PK 1400 1,400PK 1450 1,450PK 1500 1,500PK 1550 1,550PK 1600 1,600PK 1650 1,650PK 1700 1,700PK 1750 1,750PK 1800 1,800PK 1850 1,850PK 1900 1,900PK 1950 1,950PK 2000 2,000PK 2120 2,120PK 2240 2,240PK 2360 2,360PK 2500 2,500PK 2650 2,650PK 2800 2,800PK 3000 3,000

Product EffectiveCode Length (mm)

PK

(inch x 10)

47

30-10-732 1922V277

30-10-733 1922V282

30-10-773 1922V298

30-10-783 1922V302

30-10-813 1922V313

30-10-813 1922V314

30-10-838 1922V321

30-10-863 1922V332

30-10-878 1922V338

30-10-943 1922V363

30-10-988 1922V381

30-10-998 1922V386

30-10-1043 1922V403

30-10-1078 1922V417

30-10-1098 1922V426

30-10-1143 1922V443

30-10-1173 1922V454

30-10-1188 1922V460

30-10-1248 1922V484

30-10-1353 1922V526

30-10-1398 1922V544

30-10-1553 1922V604

30-10-1618 1922V630

30-10-1663 1922V646

30-10-1708 1922V666

30-10-1758 1922V686

30-10-1813 1922V706

30-10-1848 1922V721

30-10-1863 1922V726

30-10-1928 1922V751

30-10-1938 1922V756

30-10-2068 1922V806

30-10-2168 1922V846

37-12-855 2322V329

37-12-945 2322V364

37-12-995 2322V384

37-12-1030 2322V396

37-12-1090 2322V421

37-12-1120 2322V434

37-12-1140 2322V441

37-12-1190 2322V461

37-12-1240 2322V481

37-12-1255 2322V486

37-12-1345 2322V521

37-12-1395 2322V541

37-12-1545 2322V601

37-12-1595 2322V621

37-12-1700 2322V661

37-12-1750 2322V681

37-12-1800 2322V701

37-12-1850 2322V721

37-12-2055 2322V801

37-12-2120 2322V826

37-12-2170 2322V846

37-12-2270 2322V886

37-12-2360 2322V921

12-5-451 7.522V173

12-5-501 7.522V193

12-5-551 7.522V212

12-5-571 7.522V220

16-6-513 1022V196

16-6-548 1022V210

16-6-573 1022V220

16-6-578 1022V223

16-6-628 1022V247

22-8-615 1422V235

22-8-625 1422V240

22-8-648 1422V250

22-8-700 1422V270

22-8-755 1422V290

22-8-780 1422V300

22-8-855 1422V330

22-8-880 1422V340

22-8-930 1422V360

22-8-1030 1422V400

22-8-1085 1422V420

22-8-1135 1422V440

22-8-1185 1422V460

22-8-1200 1422V466

22-8-1210 1422V470

22-8-1235 1422V480

22-8-1390 1422V540

22-8-1540 1422V600

22-8-1690 1422V660

22-8-1845 1422V720

22-8-1995 1422V780

10-5-450

10-5-475

10-5-500

10-5-525

10-5-550

10-5-575

10-5-600

10-5-625

10-5-650

10-5-675

10-5-700

10-5-725

10-5-750

12-6-500

12-6-525

12-6-550

12-6-575

12-6-600

12-6-625

12-6-650

12-6-675

12-6-700

12-6-725

12-6-750

12-6-775

12-6-800

12-6-825

12-6-850

12-6-875

12-6-900

12-6-925

12-6-950

12-6-975

12-6-1000

16-8-600

16-8-625

16-8-650

16-8-675

16-8-700

16-8-725

16-8-750

16-8-775

16-8-800

16-8-825

16-8-850

16-8-875

16-8-900

16-8-925

16-8-950

16-8-975

16-8-1000

20-10-750

20-10-800

20-10-850

20-10-900

20-10-950

20-10-1000

20-10-1050

20-10-1100

20-10-1150

20-10-1200

20-10-1250

20-10-1300

20-10-1350

20-10-1400

20-10-1450

20-10-1500

20-10-1550

20-10-1600

20-10-1650

20-10-1700

20-10-1750

20-10-1800

20-10-1850

20-10-1900

20-10-1950

20-10-2000

20-12-750

20-12-800

20-12-850

20-12-900

20-12-950

20-12-1000

20-12-1050

20-12-1100

20-12-1150

20-12-1200

20-12-1250

20-12-1300

20-12-1350

20-12-1400

20-12-1450

20-12-1500

20-12-1550

20-12-1600

20-12-1650

20-12-1700

20-12-1750

20-12-1800

20-12-1850

20-12-1900

20-12-1950

20-12-2000

ISO Code RMA Code ISO Code RMA Code ISO Code RMA Code ISO Code*1 ISO Code*2 ISO Code*3

Note 1) *1, *2, *3 are only in ISO Code.Note 2) Please contact us for sizes beyond the standard size.

a(mm) b(mm) (°)30 10 2237 12 2212 5 2216 6 2222 8 2210 5 2212 6 2216 8 2220 10 2220 12 22

Changes in speed can be accurately, smoothly and quietly transmitted fromlow to high speed.High precision and transmission efficiency as well as excellent durability.Almost no elongation. Excellent oil, heat and lateral pressure resistance.Specially for high performance and high quality transmission systems.

Supar VS® Belt (Variable Speed Belt)Super VS® Belt (Variable Speed Belt)


Standard Belt Sizes

Product Code

48

Because of its large power transmission capacity,compact design application and cost reductionare possible.

• Smooth and quiet operation with little vibration. Withstands operation at a maximum speed of 60m/sec.

• Excellent heat resistance, oil resistance and antistatic properties.• Almost no need for re-tension since the belt doesn’t stretch much.

FLEXSTAR® BeltFLEXSTAR® Belt

Dimensions & Product Code

Standard Belt Sizes

Applications

Belt Type Thickness (mm) Standard Belt Width (mm) Product Code

FL

FM

FH

10, 15, 20, 25, 30, 35, 40, 50

20, 30, 40, 50, 60, 80, 100

50, 75, 100, 125, 150, 175, 200

Example

• In addition, a belt known as FLEG for transportation is also available. Belt thickness of FLEG is 1.3 mm.

Belt Length FL FM FH Belt Length FL FM FH Belt Length FL FM FH Belt Length FL FM FH(mm) (mm) (mm) (mm)

200

224

250

280

315

355

400

450

500

530

560

600

630

670

710

750

800

850

900

950

1000

1060

1120

1180

1250

1320

1400

1500

1600

1700

1800

1900

2000

2240

2500

2800

3150

3550

4000

General Industrial Machinery Machine Tool Woodworks Machinery Textile Machinery Paper Manufacturing Machinery Electric Equipment Other Kinds of Machinery

Various fans Lathe Router machine Winder Paper machine Generator Grinding millBlower NC lathe Bandsaw Draw texturizing machine Rotary paper machine Computer Printing machineVarious pumps Milling machine Chipper Assemble winder Holding feeder Power planer Precision equipmentCompression machine Grinder Yarn twisting machine Packing sorting machine Auto dryer Leisure facilitiesPulverizer Various polishing machines Twister Paper tube machine Chemical equipmentCompressor Slotter Various spinning and Automatic vendingMixer Planer weaving machines machineCentrifuge Hobbing machine Money changingVarious press Drilling machine machineMill Boring machine Copier

Shaver Paper feederShirring machine Ticketing machinePower pressFriction press

49

SuPER FLEXSTAR® is a high tension flat beltdeveloped for press application for separation ofsolids and liquids.• High belt tension.• Besides press application, it also suits applications like conveyance.

SuPER FLEXSTAR® BeltSuPER FLEXSTAR® Belt


Belt Types

Product Code (Example)

Top cushion: Chloroprene rubberCord protection material: Nylon

Adhesion rubber: Chloroprene rubber

Cord: Aramid

Cord protection material: NylonBottom cushion: Chloroprene rubber

a b Belt Type Application Standard Width Belt Thickness Standard Size Minimum Pulley Belt Edge Tensile Strength

(mm) (mm) (mm) Diameter (mm) Finishing (kN/cm)

FW For high pressure 50 (25~400)* 8.4 3150, 4800 300 No rubber ears 12

FY For high pressure,anti-oil swelling 52 8.4 (2000~4800)* 300 With rubber ears 10

* ( ) indicates manufacturable range.

50

This is a wide-angle belt with an angle of approx. 600.

• High-speed power transmission with low vibration.• Compact design and cost efficient.• Maintenance-free and stretch resistance.• Excellent weather resistance.

POLYMAX® BeltPOLYMAX® Belt

Cross-Sectional Sizes & Product Code

Standard Belt Sizes

POLYMAX® Belt

3M180 3M4253M185 3M4373M190 3M4503M195 3M4653M200 3M4753M206 3M4873M212 3M5003M218 3M5153M224 3M5303M230 3M545

3M236 3M5603M243 3M5803M250 3M6003M258 3M6153M265 3M6303M272 3M6503M280 3M6703M290 3M6903M300 3M7103M307 3M730

3M315 3M7503M3253M3353M3453M3553M3653M3753M3873M4003M412

Multi-POLYMAX® BeltNo. of Ribs 2 3

Dimensions(a x b)

ProductCode

Example

3X2mm 5X3mm 7X5mm 11X7mm Belt Type 5M 7M 11M 5M 7M 11M

a 9.8 15.6 24.4 15.1 24.1 37.6

b 3.5 5.3 7.0 3.5 5.3 7.0

P 5.3 8.5 13.2 5.3 8.5 13.2

Dimensions

ProductCode

Example

3M 5M 7M 11M

5M280 * 5M 6705M290 * 5M 6905M300 * 5M 7105M307 * 5M 7305M315 * 5M 7505M325 * 5M 7755M335 * 5M 8005M345 * 5M 8055M355 * 5M 8255M365 * 5M 850

5M375 * 5M 8755M387 * 5M 9005M400 * 5M 9255M412 * 5M 9505M425 * 5M 9755M437 * 5M10005M450 * 5M10305M462 * 5M10605M475 * 5M10905M487 * 5M1120

* 5M500 * 5M1150* 5M515 * 5M1180* 5M530 * 5M1220* 5M545 * 5M1250* 5M560 * 5M1280* 5M580 * 5M1320* 5M600 * 5M1360* 5M615 * 5M1400* 5M630 * 5M1450* 5M650 * 5M1500

* 5M1850

* 7M 500 * 7M1180* 7M 515 * 7M1220* 7M 530 * 7M1250* 7M 545 * 7M1280* 7M 560 * 7M1320* 7M 580 * 7M1360* 7M 600 * 7M1400* 7M 615 * 7M1450* 7M 630 * 7M1500* 7M 650 * 7M1550

* 7M 670 * 7M1600* 7M 690 * 7M1650* 7M 710 * 7M1700* 7M 730 * 7M1750* 7M 750 * 7M1800* 7M 775 * 7M1850* 7M 800 * 7M1900* 7M 825 * 7M1950* 7M 850 * 7M2000* 7M 875 * 7M2060

* 7M 900 * 7M2120* 7M 925 * 7M2180* 7M 950 * 7M2240* 7M 975 * 7M2300* 7M1000* 7M1030* 7M1060* 7M1090* 7M1120* 7M1150

*11M 710 *11M1700*11M 730 *11M1750*11M 750 *11M1800*11M 775 *11M1850*11M 800 *11M1900 *11M 825 *11M1950*11M 850 *11M2000*11M 875 *11M2060*11M 900 *11M2120*11M 925 *11M2180

*11M 950 *11M2240*11M 975 *11M2300*11M1000*11M1030*11M1060*11M1090*11M1120*11M1150*11M1180*11M1220

*11M1250*11M1280*11M1320*11M1360*11M1400*11M1450*11M1500*11M1550*11M1600*11M1650

* Indicates availability of Multi-POLYMAX®


Type 3M 5M 7M 11M

51

A small transparent belt for light-duty power transmission.

• With its high flexibility, it can be used with a small diameter pulley.• Excellent abrasion resistance and thus clean operation.• Small slippage operation.• Excellent oil resistance.

MB Belt® (Polyurethane V-Belt)MB Belt® (Polyurethene V-Belt)

Cross-Sectional Dimensions & Product Code

Standard Belt Sizes

Belt Type Single Cog Product Code

Belt Shape MB

Top Width a (mm) 6.0

Height b (mm) 4.0

Angle (0 ) 40

Example

Dimensions (a x b)

Belt Length (Outer Circumfrence in mm)

Belt Type

Belt Shape MBBelt Type Single Cog

250 340 400 500260 345 410 510270 350 420 520280 360 430 530290 365 440 540

Belt Length300 370 450 550310 380 460 560315 385 470 640320 390 480 760330 395 490

Form & Dimensions of Pulley Grooves

Belt MBBelt Height 4.0mm

Pulley Diameter Min. Width (W) Min. Height (h) R

Wo Reference

(min)

16~30mm 5.4 4.5 360 0.8 5.6

30mm and above 5.4 4.5 380 0.8 5.6

Belt Type Single Cog Double CogMinimum Pulley Diameter (mm) 18 16

Minimum Pulley Diameter


52

This is an open-end polyurethane belt.

• It is easily applicable in complex power transmission systems such asmultiaxial and divertible power transmission.

• Thermal weld: Endless belt length possible.• Excellent abrasion and oil resistance.

STARROPE®/SuPER STARROPE®/PRENE V-ROPE/PRENE HEXAGONAL-ROPE

STARROPE®/SuPER STARROPE® Dimensions

d (mm) 2 3 4 5 6 7 8 9 10 12 15

PRENE V-ROPE Cross-Sectional Dimensions

PRENE HEXAGONAL-ROPE Cross-Sectional Dimensions

Pulley for STARROPE®/SuPER STARROPE® Pulley for PRENE V-ROPE/PRENE HEXAGONAL-ROPE

Pulley Dimensions for STARROPE®/SuPER STARROPE®

STARROPE®/SuPER STARROPE®/PRENE V-ROPE/PRENE HEXAGONAL-ROPE

Belt Code

200 200 200 200 100 100 100 100 100 50 50Length of 1 Roll (m)

Belt TypeDimensions M A B

a (mm) 10.0 12.5 16.5

b (mm) 5.5 8.5 10.5

( 0 ) 40 40 40

Length of 1 Roll (m) 100 50 50

Belt TypeDimensions AA BBa (mm) 12.5 16.5

b (mm) 10.0 12.5

( 0 ) 40 40

Length of 1 Roll (m) 50 50

Belt Type

Dimensions

PRENE V-ROPE PRENE HEXAGONAL-ROPE

M A B AA BB

b (mm) 9.7 12.3 16.3 12.3 16.3

h (mm) 9.0 12.5 15.0 12.5 15.0

Belt CodeDimensions

a (mm) 0.6 0.6 0.6 1.3 2.0 2.7 3.4 4.1 4.8 6.2 8.3

w (mm) 2.9 4.3 5.7 7.1 8.6 10.0 11.4 12.9 14.3 17.1 21.4

h (mm) 3.0 5.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 15.0 18.0

• Dimensions of V pulley are specified by JIS-B1854.


53


This is a high-quality flat belt made from premium fabric and synthetic rubber.There is very little belt shrinkage.Excellent flex resistance.Heat, water and oil resistance.

• For textile and agricultural machines.

Flat BeltFlat Belt

Product Lineup

Flat Belt

JIS 1st ClassEquivalent

JIS 2nd ClassEquivalent

JIS 3rd ClassEquivalent

Others

Round Edge Typespecial PORT®

Round Edge TypePORT®

Cut Edge TypePIONEER®

Round Edge TypeHARBOuR®

Cut Edge TypeECHO®

DRY FLEX®

For Lifter

Canvas surfacespecification

Side / core fabric : whiteTape color : light greenMark color : brown

Side / core fabric : yellow-brownTape color : brownMark color : orange

Side / core fabric : yellow-brownEdge adhesive : redMark color : brown

Side / core fabric : red-brownTape color : greenMark color : green

Side / core fabric : red-brownTape color : greenMark color : green

Applicable for lifter with its stretch resistant.For LA, LB, LC types, it is possible to add V rails.

Covered by canvas, this belt has a nonsticky surface. Singlesided belt is manufactured only in cut edge type whereas doublesided belt can be supplied in both cut and round edge type.

Standard Sizes for Round Edge Products

No. of PliesBelt Width 2P 3P 4P 5P 6P 7P 8P20mm25mm H • P30mm H • P38mm H • P H50mm H • P H • P63mm H • P H • P75mm H • P H • P H • P90mm H • P H H • P

100mm H • P H H • P P125mm H • P H H H • P150mm H H H P H • P175mm H H P200mm H H P P250mm H H P P300mm H H P350mm H400mm500mm600mm

• H: HARBOUR® P: PORT®

• Made-to-order for cut edge type (PIONEER®, ECHO®), DRY FLEX® and Canvas surface types.• A lot for made-to-order items is 100m.

-22 F (-30 C)

176 F (80 C)

MITSUBOSHI BELTING LTD. GROUPMBL (uSA) CORPORATION601 Dayton Road, Ottawa, IL 61350 Phone: (815) 434-1282 • Toll Free Call: 1-877-625-7832 or1-877-MBL-PTDB (Power Transmission Drive Belt)

Fax: (815) 434-2897 • Toll Free Fax: 1-800-782-7625 or 1-800-STARMBL

www.mblusa.com

The information contained herein is for informational purposes only, and does not enlarge, amend orimply any warranty other than provided by the manufacturer with the product. Any use of the product not in conformance with the manufacturer’s instruction may be dangerous.

(V6320201111US 1 67834)Printed in the U.S.A.

technology nature society - distributor & supplier of ... · triplex ® rawedge cogged v-belt...

Documents