TECHNOLOGY YOU DESERVE

MARINE TECHNOLOGY YOUR BOAT DESERVES

The Yuasa Seafarer range includes a comprehensive selection of superior quality marine batteries, incorporating advanced design features and specialist hard-wearing components for all marine applications. The range is equipped to handle the rigours of wave pounding, engine vibration and trailer transport while delivering reliable starting power and performance.

Warning: Threaded Terminal Usage The small threaded terminals on Yuasa Seafarer batteries are designed for powering low current draw accessories such as fish finders or GPS units, and should never be used for engine starting purposes.

In rare instances, running a sustained high current draw (such as cranking an engine repeatedly and for extended periods of time) through the small threaded terminals could possibly damage your battery. This is due to the smaller terminals having a higher resistance when compared to the main terminals, with more heat being generated under high loads as a result.

Æ Superior starting power Æ Thicker full frame cast plates for improved strength and

durability in marine applications^ Æ Dual purpose - starting and semi cycling capabilities for

on-board accessories Æ Designed to combat the effects of wave pounding, engine

vibration and damage from trailer transportation

Yuasa Seafarer batteries are the ultimate in marine battery performance, designed and built tough here in Australia to suit our conditions.

SEAFARER RANGE

ITEM

ID

BATT

ERY

TYPE

WAR

RANT

Y

VOLT

S

CCA

-18º

C

MCA

@0º

C

RC @

25ºC

AH @

20H

R

DIMENSIONS (MM)

POLA

RITY

WEI

GHT

TERM

. TYP

E

HOLD

DOW

N

SPEC

IAL

FEAT

URES

STAR

TS

ENGI

NES

ELEC

TRIC

S

L W H TH

SEAFARER

133200 D23RM MF 24 12 580 750 120 65 231 171 202 225 D 16.4 STD -CH, CI, LM, MIA, MR, PL, VR

Up to 70hp

-

133201 NS70M MF 24 12 680 880 155 75 260 171 202 225 D 21.0 STD/WN SIDECH, CI, GM, LM, MIA, MR, PL, VR

Up to 150hp

Basic

133202 N70ZM MF 24 12 780 1000 180 100 305 171 202 225 D 25.1 STD/WN -CH, CI, GM, LM, MIA, MR, PL, VR

Up to 350hp

Basic+ 2 optional electrics

Car Batteries V Marine Batteries

Unlike car batteries which generally travel on smooth, sealed roads, marine batteries must be able to resist vibration from wave pounding and trailer transport. Repeated vibration and wave impact on non-marine batteries can cause damage and cracks to appear in the battery’s internal components and outer case. This can cause shedding of active materials, accelerate corrosion, electrolyte leaks and ultimately lead to battery failure.

Car batteries are designed to deliver concentrated bursts of power to crank over and start the engine. The capacity used is replaced by the alternator which charges the battery during the journey. Marine batteries must not only have the starting power to crank over high compression engines but also provide the reserve capacity needed to run on board accessories.When choosing a marine battery it is critical to invest in a battery that has been designed and manufactured specifically to handle the extreme demands of marine environments and modern extensive electrical systems.

†Conditions apply. Refer to individual warranty statements attached to each battery. ^Positive plate only. *Not recommended for semi-cycling applications. #N70ZM MF only.

SPECIAL FEATURES GLOSSARY CELL ASSEMBLY LAYOUT

D

Multi-terminals STD / 12 Volt

CH Carry Handles MIA Made in Australia

CI State of Charge Indicator MR Mud Rack

GM Glass Mat Separator PL PlatelockTM Technology

LM Low Maintenance VR Vibration Resistant

TERMINAL TYPESStandard Wing Nut Terminal(STD/WN)

Standard Terminal Post(STD)

*

D

STD/WN / 12 Volt

#

2424

YU103-2834

For more information on the Yuasa range of products and services, contact your nearest

Yuasa Sales office on 1300 362 287