tectofin – e r uc e s waterproofing tectofin rg, mech.bef. eps dämmung dach: tectofin rg...
TRANSCRIPT
TECTOFIN – secure waterproofing
The TECTOFIN roofing membrane system
www.wolfin.com
Part of BMI Group
2
TECTOFIN combines the strength of synthetic and rubber
The best of rubberFor many years, rubber-based membranes have been unparalleled with regard to UV resistance, fle-xibility and ageing resistance. The forming of seams and details on the construction site always remains a challenge. This generally cannot be achieved with rubber membranes without resources such as adhesives, bitumen or the combination of various materials. As a rule, these are not homogeneous seams but rather bonds.
The best of syntheticHomogeneous seaming without containing any foreign substances has proven to be a reliable and construction site-compatible solution over many decades.
Homogeneous seams can be created in two ways: by dissolving the membrane surface using a sol-vent-welding agent or by means of plasticisation using hot air.
The best of both worldsTECTOFIN membranes combine the outstanding properties of both materials in one patented blend. The result is a long-lasting, robust membrane with very pleasant installation properties. The special physical properties of this combination also make it possible to forego many chemical agents that are contained in many other synthetic roofing mem-branes. This protects resources and the environment while also guaranteeing consistent properties throughout the entire service life of the membrane.
Free from flame retardantsTECTOFIN membranes are equipped with physical fire protection. Chemical flame retardants, which can drift over the installation period, are not used. With TECTOFIN SK and RV plus, the integrated glass fleece even makes direct laying on EPS and large-format wood materials possible.
TECTOFIN
3
Comprehensive range of accessoriesIn principle, almost any detail can be dissolved manually thanks to the high flexibility of TECTOFIN membranes. However, it is much faster and safer with ready-made moulded parts made from iden-tical materials, such as corners and penetrations. These accessories are supplemented with high-qua-lity system adhesives developed together with HENKEL.
RecyclableTECTOFIN membranes can be recycled without any problems. Thanks to the special synthetic material, it is possible to either return the material into the recyclable material cycle or it can be processed by means of energetic recovery. Throughout Europe, a collaboration between PVC membrane manufac-turers allows for a functioning and successful recy-cling system (Roofcollect).
Always legally secureWOLFIN Bautechnik implements technical knowled-ge – long before this knowledge leads to changes in regulations. Besides higher quality, this means additional legal security for you. Regardless of whether a property is agreed according to the flat roof regulation or DIN 18531, you always fulfil all requirements when you install TECTOFIN mem-branes according to the installation directives. For uncompromising waterproofing.
Thermomelt Connect procedureAll fleece-laminated membranes from WOLFIN Bautechnik, including TECTOFIN RV, RV plus and SK, are bonded to the roofing membrane using the THERMOMELT Connect (TMC) production process. In contrast to adhered lamination, the fleece is pres-sed into the membrane while the membrane is still hot and thus fixed permanently in place.
The composite created in this manner is completely without adhesives and forms the most secure bond between the roofing membrane and fleece, without the risk of detaching. The glued roof structure with WOLFIN roofing membranes and waterproofing thus offers the best resistance to mechanical stress, such as due to wind suction forces.
Installation types legend:
Comprehensive range of membranesThe extensive TECTOFIN product range offers the right solution for any requirement. These are spe-cialised membranes such as TECTOFIN RG for mechanical fixing and TECTOFIN SK or RV in glued installations. However, with TECTOFIN RV plus, the range also includes the right membrane for all-roun-ders with many different applications.Naturally, all of the TECTOFIN membranes are approved for ballasted installation, as is standard from WOLFIN Bautechnik.
Root and rhizome resistanceThanks to their homogeneous seaming, TECTOFIN membranes are root- and rhizome-proof, tested in accordance with the FLL testing procedure. The rhizome resistance, in particular, demonstrates the high seam strength and good weldability of the membrane material. TECTOFIN membranes can be used without hesitation under all kinds of greening.
Resistant to bitumenTECTOFIN membranes are resistant to bitumen. The tests were passed successfully with membrane mate-rial (without fleece lamination) over a period of 90 days at 70°C. The results impressively confirm the bitumen resistance of the TECTOFIN membranes.No matter whether these come into direct contact with bitumen with or without fleece lamination.
Especially wide welding window in any weatherTECTOFIN membranes can be welded homo-geneously using hot air or solvent welding. The optimum temperatures and speeds for the perfect seam depend on many external circumstances such as temperature and humidity. Thanks to the wider temperature window for welding, TECTOFIN membranes offer additional security when being processed.
High flexibilityEven at cold temperatures, TECTOFIN membranes are very flexible and enable good processing right down to the finest details all year round year.
Root penetration due to the sponta-neous growth of flora is prevented reliably with TECTOFIN
unter KiesVerlegung Verlegung unter Begrünung
Mechan. Befestigung
Verklebte Verlegung
Selbstklebend
Mechanically fixed
Loose laid under ballast and green roof
Cold self-adhesive
Strip-bonded with Teroson EF TK 400
QUALITY FEATURES
4
TECTOFIN RGEspecially robust and tear-resistant
Technical details: Centrally reinforced synthetic roofing and waterpro-ofing membrane based on a patented blend with rubber.
Installation types:TECTOFIN RG can be loose laid under ballast or used in a mechanically fixed structure.
TECTOFIN RG stands out thanks to its especially good tear resistance. The homogeneous membrane edge ensures even greater security when welding the membranes to each other.
Classifications/approvals in accordance with:
■ EN 13956 CE waterproofing of roofs ■ EN 13967 CE waterproofing of buildings ■ DIN SPEC 20000-201 (waterproofing of roofs) ■ DIN SPEC 20000-202 (waterproofing of
buildings) ■ EN 13501-1 (Class E) ■ ENV 1187 / EN 13501-5 BROOF (t1) ■ DIN 4102-7 (external fire) ■ DIN 18531 (waterproofing of non-utilized
and utilized roofs)
With glass scrim in the centre
Sports hall, TECTOFIN RG titanium grey, Saxony
unter KiesVerlegung Verlegung unter Begrünung
Mechan. Befestigung
TECTOFIN
5
TECTOFIN RGExample structures
TECTOFIN titan grey
TECTOFIN grey
TECTOFIN RG, mech.bef. MF Dämmung
Dach:
TECTOFIN RG, mech.bef. EPS Dämmung
Dach:TECTOFIN RG mechanically fixed on mineral fibre
TECTOFIN RG mechanically fixed on EPS
TECTOFIN RG product range
Product Thickness mm
Width mm
Length m
Area m²
grey
RG 1.5 1,100 15 16.50
RG 1.5 1,620 15 24.30
RG 1.8 1,620 15 24.30
RG 2.01) 1,620 10 16.20
Membrane strip RG
1.5 350 20 7.00
Membrane strip RG
1.5 550 20 11.00
titan grey
RG 1.5 1.100 15 16.50
Membrane strip RG
1.5 350 20 7.00
Membrane strip RG
1.5 550 20 11.00
1) Please enquire regarding delivery time
TECTOFIN RG, lose unter Auflast
Dach:
TECTOFIN RG loose laid under ballast
TECTOFIN RG
6
TECTOFIN RV plusThe all-rounder
Technical details: Fleece-backed synthetic roofing membrane with glass fleece in the centre. Factory-made with a fleece-free welding edge.
Installation types:TECTOFIN RV plus can be glued in strips with Teroson EF TK 400 and laid loose under ballast.TECTOFIN RV plus is also approved for mechanical fixing (in accordance with the flat roof directive and DIN 18531).
TECTOFIN RV plus is laminated on the reverse with a high-quality 200g polyester fleece, which is affixed using the Thermomelt Connect procedure
The plus is an additional glass fleece inlay, which is affixed centrally when the membrane is extruded. This significantly improves not only dimensional sta-bility but also the mechanical properties of the mem-brane. For instance, the influence of thermal stress is significantly reduced. The outstanding fire properties of the flame retardant-free membrane enable direct laying on all common types of insulation.
With TECTOFIN RV plus, you save time and resour-ces and always have the right membrane to hand, even for complicated roof symmetries.
With a central glass fleece inlay and polyester fleece lamination on the reverse
unter KiesVerlegung Verlegung unter Begrünung
Mechan. BefestigungVerklebte Verlegung
TECTOFIN
7
TECTOFIN RV plusExample structures
TECTOFIN RV plus, geklebt
( streifenweise )
Dach:
TECTOFIN RV plus, lose unter Auflast
Dach:
TECTOFIN RV plus mech.bef.
Dach:
TECTOFIN RV plus glued in strips with Teroson EF TK 400
TECTOFIN RV plus loose laid under ballast
TECTOFIN RV plus mechanically fixed
TECTOFIN RV plus product range
Product Thickness
mm1)Width mm
Length m
Area m²
RV plus grey 2.5 1,100 15 16.50
RV plus grey 2.5 1,620 15 24.30
RV plus titan grey 2.5 1,100 15 16.50
RV plus titan grey 2.5 1,620 15 24.30
RG strips for header welding
Membrane strip RG grey
1.5 350 20 7.00
Membrane strip RG grey
1.5 550 20 11.00
Membrane strip RG titan grey
1.5 350 20 7.00
Membrane strip RG titan grey
1.5 550 20 11.00
1) Incl. 1.0 mm polyester fleece backing
TECTOFIN RV plus glued with Teroson EF TK 400 on EPS
TECTOFIN RV plus with central glass fleece inlay
Classifications/approvals in accordance with:
■ EN 13956 CE waterproofing of roofs ■ EN 13967 CE waterproofing of buildings ■ DIN SPEC 20000-201 (waterproofing of roofs) ■ DIN SPEC 20000-202 (waterproofing of
buildings) ■ EN 13501-1 (Class E) ■ ENV 1187 / EN 13501-5 BROOF(t1) ■ DIN 4102-7 (external fire) ■ DIN 18531 (waterproofing of non-utilized
and utilized roofs)
TECTOFIN RV PLUS
8
TECTOFIN RV
Technical details: Homogeneous, fleece-backed synthetic roofing andwaterproofing membrane. Factory-made with a flee-ce-free welding edge.
Installation types:TECTOFIN RV is approved for glued installation and for loose laying under ballast.
TECTOFIN RV is characterised by its particular robustness and good processability. The high- quality polyester fleece feature in combination with the roofing membrane adhesive Teroson EF TK 400 ensures outstanding, system-tested adhesion and thus even more security for installers and builders.
The factory-fitted finish with a fleece-free welding edge enables the secure, homogeneous welding of the membranes.
Classifications/approvals in accordance with:
■ EN 13956 CE waterproofing of roofs ■ EN 13967 CE waterproofing of buildings ■ DIN SPEC 20000-201 (waterproofing of roofs) ■ DIN SPEC 20000-202 (waterproofing of
buildings) ■ EN 13501-1 (Class E) ■ ENV 1187 / EN 13501-5 BROOF (t1) ■ DIN 4102-7 (external fire) ■ DIN 18531 (waterproofing of non-utilized
and utilized roofs) ■ Environmental product declaration in
accordance with ISO 14025 and EN 15804
Single-family house with TECTOFIN RV
With long-standing experience
Without inlay with polyester fleece backing on the reverse
unter KiesVerlegung Verlegung unter Begrünung
Verklebte Verlegung
TECTOFIN
9
Efficient fixing with a professional installation tool
TECTOFIN RVExample structures
TECTOFIN RV , geklebt
Dach:
TECTOFIN RV , lose unter Auflast
Dach:
TECTOFIN RV glued in strips with Teroson EF TK 400
TECTOFIN RV loose laid under ballast
TECTOFIN RV grey product range
Product Thickness
mm1)Width mm
Length m
Area m²
RV 2.5 1,620 15 24.30
RV 3.02) 1,620 15 24.30
RG strips for header welding
Membrane strip RG
1.5 350 20 7.00
Membrane strip RG
1.5 550 20 11.00
1) Incl. 1.0 mm polyester fleece backing2) Please enquire regarding delivery time
TECTOFIN RV
10
TECTOFIN SKThe fastest method of waterproofing
Technical details: Cold self-adhesive synthetic roofing membrane with central glass fleece and 200g polyester fleece back-ing with cold self-adhesive coating. Factory-made with a fleece-free welding edge.
Installation types:TECTOFIN SK is glued over the entire surface either with outdoor weathering or under ballast. In addit-ion, TECTOFIN SK can also be mechanically fixed where required, if technically necessary, according to the latest standards and directives thanks to the central glass fleece inlay.
TECTOFIN SK combines the high-quality raw material blend with over 20 years of experience in the field of self-adhesive synthetic roofing membra-nes. It has outstanding mechanical properties and increased dimensional stability.
It can be laid directly on many substrates, such as on EPS DAA dh and dm (no primer required) and on large-scale wood materials. This ensures a high level of flexibility and fast working.
Dementia centre, Hamburg
TECTOFIN SK
BlattIndexAusgabedatum
Bauteil
Thema
WOLFIN Bautechnik GmbHAm Rosengarten 5 D-63607 Wächtersbach/Neudorf
Maßstab
o.A.
Tel.: 06053/708-141Fax: 06053/708-113
Zusatz:
Die für die Abdichtung relevanten Abdichtungsschichten und Klebungen, sowie ausÜberlappungsbereichen von Bahnen und Bändernresultierende Hohlräume, sind überhöht dargestellt.
gez./gen.
demabdeghe06.04.2016
TECTOFIN SK BAHN
Bahnenlegende
1/10
With a central glass fleece inlay and polyester fleece backing on reverse with a cold self-adhesive coating
unter KiesVerlegung Verlegung unter Begrünung
Mechan. BefestigungSelbstklebend
TECTOFIN
11
TECTOFIN SKExample structures
Dach: Neubau
TECTOFIN SK, geklebter Schichtenaufbau, EPS oder Kaschierte MF/PIR Dämmung
Dach: Neubau
TECTOFIN SK, geklebter Schichtenaufbau unter Auflast
TECTOFIN SK adhered over the entire surface
TECTOFIN SK loose laid under ballast
TECTOFIN SK product range
Product Thickness
mm1)Width mm
Length m
Area m²
SK grey 2.6 1,620 12.50 20.25
SK 2R grey 2.6 1,100 12.50 13.75
Membrane strip SK grey
2.6 350 12.50 4.37
Membrane strip SK grey
2.6 550 12.50 6.87
Membrane strip SK grey
2.6 750 12.50 9.37
RG strips for header welding
Membrane strip SK grey
1.5 350 20 7.00
Membrane strip SK grey
1.5 550 20 11.00
1) Incl. 1.1 mm fleece backing and self-adhesive coating
TECTOFIN SK with fleece on the reverse and self-adhesive coating
TECTOFIN SK – simply remove protective film
Klassifizierungen/Zulassungen gemäß: ■ EN 13956 CE waterproofing of roofs ■ DIN SPEC 20000-201 (waterproofing
of roofs) ■ DIN 18531 (waterproofing of non-utilized
and utilized roofs) ■ EN 13501-1 (Class E) ■ DIN 4102-1 (B2) ■ ENV 1187 / EN 13501-5 BROOF (t1) ■ DIN 4102-7 (external fire)
TECTOFIN SK
12
Information for users: * Information about the tested system structures is available from the manufacturer** Values in new condition
Explanation: MDV = Manufacturer’s declared value MLV = Manufacturer’s limiting value
TECTOFIN RG TECTOFIN RV plus TECTOFIN RV TECTOFIN SK /SK 2R
Result Result Result Result Result
Characteristic Test standard Unit Information 1.5 mm 1.8 mm 2.0 mm 2.5 mm 2.5 mm 3.0 mm 2.6 mm
External properties DIN EN 1850-2 – fulfilled fulfilled fulfilled fulfilled fulfilled
Length DIN EN 1848-2 m MDV 15 15 10 15 15 15 12,50
Width – ” – m MDV 1,10 / 1,62 1,62 1,62 1,1 / 1,62 1,10 / 1,62 1,10 / 1,62
Straightness – ” – mm MLV ≤ 50 ≤ 50 ≤ 50 ≤ 50
Flatness – ” – mm MLV ≤ 10 ≤ 10 ≤ 10 ≤ 10
Mass per unit DIN EN 1849-2 kg/m2 MDV 1,9 2,3 2,5 2 2,0 2,65 2
Effective thickness – ” – mm MDV 1,5 1,8 2,0 1,5 1,5 2,0 1,5
Water tightness DIN EN 1928 B kPa MLV fulfilled fulfilled fulfilled fulfilled
External fire performance DIN ENV 1187 – Annex E BROOF (t1) ** BROOF (t1) ** BROOF (t1) ** BROOF (t1) **
Reaction to fire DIN EN 13501-1 – cf. 5.2.5.2 Class E Class E Class E Class E
Joint peel resistance DIN EN 12316-2 N/50 mm MLV ≥ 300 ≥ 250 ≥ 250 ≥ 250
Joint shear resistance DIN EN 12317-2 N/50 mm MLV ≥ 800 (tear outside of joint) ≥ 500 (tear outside of joint) ≥ 500 (tear outside of joint) ≥ 500 ((tear outside of joint)
Tensile strength lengthwise/crosswise DIN EN 12311-2 N/50 mm MLV ≥ 800 ≥ 600 ≥ 600 ≥ 600
Elongation – ” – % MLV ≥ 2 ≥ 10 ≥ 10 ≥ 10
Resistance to impact Method A Method B
DIN EN 12691DIN EN 12691
mmmm
MLVMLV
600600
700700
750750
600600
500500
500500
600600
Resistance to static loading DIN EN 12730 B kg MLV ≥ 20 ≥ 20 ≥ 20 ≥ 20
Durability of watertightness against ageing
EN 1296 in accor-dance with EN 1928 – fulfilled fulfilled fulfilled fulfilled fulfilled
Durability of watertightness against chemicals
EN 1847 in accor-dance with EN 1928 – fulfilled fulfilled fulfilled fulfilled fulfilled
Resistance to nail tear DIN EN 13859-1 N MLV ≥ 400 ≥ 500 ≥ 500 ≥ 500
Tear resistance DIN EN 12310-2 N MLV ≥ 200 ≥ 250 ≥ 250 ≥ 250
Resistance to root penetration DIN EN 13948 – fulfilled fulfilled fulfilled fulfilled fulfilled
Dimensional stability DIN EN 1107-2 % MLV ≤ 1.0 ≤ 1.0 ≤ 1.0 ≤ 1.0
Foldability at low temperature DIN EN 495-5 °C MLV ≤ -20 ≤ -20 ≤ -20 ≤ -20
UV exposure DIN EN 1297 visual fulfilled fulfilled fulfilled fulfilled fulfilled
Hail resistance DIN EN 13583 m/s MLV ≥ 25 ≥ 25 ≥ 25 ≥ 25
Water vapour permeability DIN EN 1931 – µ = MDVoder 15,000 20,000 ± 5,000 20,000 ± 5,000 20,000 ± 5,000 20,000 ± 5,000
Bitumen compatibility DIN EN 1548 – fulfilled fulfilled fulfilled fulfilled fulfilled
TECHNICAL INFORMATION – CE PRODUCT DATA IN ACCORDANCE WITH EN 13956 AND EN 13967
TECTOFIN
13
Last updated: 01/2018Technical changes due to further developments are possible.
Please note the valid installation directives and instructions.
TECTOFIN RG TECTOFIN RV plus TECTOFIN RV TECTOFIN SK /SK 2R
Result Result Result Result Result
Characteristic Test standard Unit Information 1.5 mm 1.8 mm 2.0 mm 2.5 mm 2.5 mm 3.0 mm 2.6 mm
External properties DIN EN 1850-2 – fulfilled fulfilled fulfilled fulfilled fulfilled
Length DIN EN 1848-2 m MDV 15 15 10 15 15 15 12,50
Width – ” – m MDV 1,10 / 1,62 1,62 1,62 1,1 / 1,62 1,10 / 1,62 1,10 / 1,62
Straightness – ” – mm MLV ≤ 50 ≤ 50 ≤ 50 ≤ 50
Flatness – ” – mm MLV ≤ 10 ≤ 10 ≤ 10 ≤ 10
Mass per unit DIN EN 1849-2 kg/m2 MDV 1,9 2,3 2,5 2 2,0 2,65 2
Effective thickness – ” – mm MDV 1,5 1,8 2,0 1,5 1,5 2,0 1,5
Water tightness DIN EN 1928 B kPa MLV fulfilled fulfilled fulfilled fulfilled
External fire performance DIN ENV 1187 – Annex E BROOF (t1) ** BROOF (t1) ** BROOF (t1) ** BROOF (t1) **
Reaction to fire DIN EN 13501-1 – cf. 5.2.5.2 Class E Class E Class E Class E
Joint peel resistance DIN EN 12316-2 N/50 mm MLV ≥ 300 ≥ 250 ≥ 250 ≥ 250
Joint shear resistance DIN EN 12317-2 N/50 mm MLV ≥ 800 (tear outside of joint) ≥ 500 (tear outside of joint) ≥ 500 (tear outside of joint) ≥ 500 ((tear outside of joint)
Tensile strength lengthwise/crosswise DIN EN 12311-2 N/50 mm MLV ≥ 800 ≥ 600 ≥ 600 ≥ 600
Elongation – ” – % MLV ≥ 2 ≥ 10 ≥ 10 ≥ 10
Resistance to impact Method A Method B
DIN EN 12691DIN EN 12691
mmmm
MLVMLV
600600
700700
750750
600600
500500
500500
600600
Resistance to static loading DIN EN 12730 B kg MLV ≥ 20 ≥ 20 ≥ 20 ≥ 20
Durability of watertightness against ageing
EN 1296 in accor-dance with EN 1928 – fulfilled fulfilled fulfilled fulfilled fulfilled
Durability of watertightness against chemicals
EN 1847 in accor-dance with EN 1928 – fulfilled fulfilled fulfilled fulfilled fulfilled
Resistance to nail tear DIN EN 13859-1 N MLV ≥ 400 ≥ 500 ≥ 500 ≥ 500
Tear resistance DIN EN 12310-2 N MLV ≥ 200 ≥ 250 ≥ 250 ≥ 250
Resistance to root penetration DIN EN 13948 – fulfilled fulfilled fulfilled fulfilled fulfilled
Dimensional stability DIN EN 1107-2 % MLV ≤ 1.0 ≤ 1.0 ≤ 1.0 ≤ 1.0
Foldability at low temperature DIN EN 495-5 °C MLV ≤ -20 ≤ -20 ≤ -20 ≤ -20
UV exposure DIN EN 1297 visual fulfilled fulfilled fulfilled fulfilled fulfilled
Hail resistance DIN EN 13583 m/s MLV ≥ 25 ≥ 25 ≥ 25 ≥ 25
Water vapour permeability DIN EN 1931 – µ = MDVoder 15,000 20,000 ± 5,000 20,000 ± 5,000 20,000 ± 5,000 20,000 ± 5,000
Bitumen compatibility DIN EN 1548 – fulfilled fulfilled fulfilled fulfilled fulfilled
CE PRODUCT DATA
14
TECTOFIN system accessoriesThe key to the perfect waterproofing
Perfect flat roof and structural waterproofing requi-res optimally coordinated system components. In keeping with the high-quality TECTOFIN roofing membranes, greater security can be achieved consistently by using the right tools, moulded parts made from identical materials for e.g. corners and penetrations and, naturally, auxiliary materials for seam welding and sealing.
Besides the possibility of manual detailing, the TECTOFIN membrane system also offers ready- made internal and external corners. These not only make installation on the property easier and thus save time and money, but also offer far greater pro-cessing security. As a system part in the TECTOFIN membrane system, the lightning protection element and pipe edging is ideal for all kinds of water-proofing with penetrations with a small diameter.
These TECTOFIN system accessories are fixed to the waterproofing in the appropriate place by means of solvent welding or hot air.
The WITEC welding board The welding board is equipped with a moving fillet board that makes it easier to weld surface waterproofing to bonded blank profiles and allows for the precise welding of fillets.
WITEC welding board
Aluminium kneeling board
Padded kneeling board
TECTOFIN
15
TECTOFIN seaming techniqueHot air welding by hand
Surface seams can be welded using hot air (handheld equipment or machine). In terms of detailing, welding generally takes place using hot air, e.g. internal and external corners, T-joints and pipe edging.
Hot air welding by machine
Long membrane seams are closed especially evenly, securely and efficiently with welding machines.
Cold or solvent welding
The WITEC solvent-welding agent is applied between the membrane overlaps, which are at least 4 cm wide, with the brush using gentle rubbing motions and the seam area is then pressed with a roller.
Seam inspection
Seam inspection with testing needle.
TECTOFIN R – homogeneous membrane for detailing
Mem-brane
Thick-ness mm
Width mm
Length m
Area m²
R grey 1.5 1,100 20 22.00
R grey 1.5 150 20 3.00
R titan grey
1.5 1,100 20 22.00
R titan grey
1.5 150 20 3.00
Moulded parts made from TECTOFIN membrane material
Internal cornersgrey / titan grey
External cornersgrey / titan grey
Lightning protection element incl. hose clamp and heat-shrink hoseØ internal: 20 mm pipe length: 235 mm
Pipe edging 50 mmincl. heat-shrink hose Ø internal: 50 mm pipe length: 285 mm
System parts TECTOFIN system
WITEC solvent welding agent for the homogeneous cold welding of the TECTOFIN membranes Pack sizes: 1 l, 5 l, 30 l
WITEC cleaning agent To remove soiling Pack size: 5 l
WOLFIN special primer to prepare certain surfaces for the bonding of TECTOFIN SK
TECTOFIN liquidgrey/titan grey to seal seams Pack size: 1 l
WOLFIN SYSTEM PARTS
16
Universal ventilation and drainage system
All stainless steel system parts for the TECTOFIN membrane system are fitted with a stainless steel bonded blank flange and a grey universal mem-brane flange for a homogeneous connection to the surface sealing. Thanks to its special blend, the new grey membrane flange is designed for use with WOLFIN grey, TECTOFIN grey and COSMOFIN. You are sure to be on the safe side with the stain-less steel ventilation and drainage system from WOLFIN Bautechnik, not only for new buildings but also for renovations.
Custom-made products can be created in many shapes, colours and sizes (length and external dia-meter up to 1.0m) on an individual basis. These are usually delivered within 14 days.
Benefits of the WOLFIN drainage system:n Stainless steel according to AISI 316
for the highest requirementsn Tested by LGAn Custom-made products possiblen Affordablen Homogeneous connection technology n Above-average drainage performance n Systems have proven themselves over
many yearsn Robust, even at low temperaturesn Resistant to chemicalsn Not flammable
TECTOFIN
17
Stainless steel system parts for the utmost security
Against corrosion, for greater securityStainless steel is compatible with all metals used within construction. There is thus no need for sepa-rators between the metals, e.g. zinc and copper, based on the combination of materials.
Even with extreme moisture loads, e.g. for flat roofs, wet rooms, commercial kitchens, balconies, terraces and underground garages, drainage and ventilation elements made from stainless steel offer the greatest possible security.
BASIC ELEMENT WITH LIP SEAL AND THERMAL INSULATION
Material thickness 1.0 mm, thermally insulated
Without covering: With covering*:
DN 70 Ø 75 mm Ø* 119 mm
DN 100 Ø 110 mm Ø* 154 mm
DN 125 Ø 125 mm Ø* 169 mm
300 mm
Ø*Ø
280
mm
Risk of contact corrosion X
Material Aluminium Strip galvanised
Stainless steel
Titanium zinc
Copper Brass
Aluminium – – – – X X
Strip galvanised
– – – – X X
Stainless steel
– – – – – –
Titanium zinc
– - – – X X
Copper X X – X – –
Brass X X – X – –
VENTILATION AND DRAINAGE
18
EXTENSION ELEMENT INCLUDING LEAF STOP BASKET
Available with WOLFIN, universal grey membrane flange. Material thickness 0.7mm, pipe length 300mm for insulation thicknesses of 115 to 230mm, suitable for basic element or pipe with sleeve. Can be combined with Gravel stop SD for greater drainage performance.
Drainage DN 70 DN 100 DN 125 capacity: l/s Ø 75 mm Ø 110 mm Ø 125 mm
Water level with with Gravel with with Gravel with with Gravel in mm leaf stop stop SD leaf stop stop SD leaf stop stop SD
5 0.28 0.35 – 0.6 – 0.5
15 1.2 1.2 1.73 1.95 – 1.8
25 2.39 3.7 3.4 5.2 3.83 4.65
35 4.3 9.6 5.61 11.3 5.8 10.05
45 6 13.85 7.78 19.8 7.81 19.1
55 – 19.9 10 28 9.66 28.5
Requirement: ≥ 1,70 Requirement: ≥ 4,50 Requirement: ≥ 7,00
350 mm
Ø
300
mm
Vertical drainage element
Horizontal drainage element
DRAINAGE PERFORMANCE PARAPET DRAIN WITH GRAVEL STOP SD (in l/s)
Via the parapet drain in DN 100 with a very low construction height, in combination with the Gravel stop SD, sensible drainage capacities can now also be achieved through the roof parapet. For reliable, economical drainage of the roof area. Ø 110 mm, material thickness 1.0 mm, height approx. 144 mm (650) / 232 mm (1,000), with Gravel stop SD. Available with WOLFIN and universal grey membrane flange.
350 mm
Ø
650
mm1,0
00 m
m
195 mm
Drainage capacity: l/s DN 100 Ø 110 mm
Water level in mm with tube as spout
5 0.7 0.5
15 1.8 1.7
25 3.8 3.4
35 8 6.1
45 8.2 7
55 – 7.1
Requirement: ≥ 4,50
195 mm
VENTILATION ELEMENT
Material thickness 0.7 mm, pipe length: 300 mm
DN 100 Ø 110 mm. Additional sizes on request.
Available with WOLFIN and universal grey mem-brane flange, material thickness 0.7 mm, pipe length via flange 300 mm plus cover attachment, for insulation thicknesses from 115 to 230 mm.
The pipe should be shortened accordingly for small insulation thicknesses. Can be combined with WOLFIN Basic element DN 100.
Ø
375
mm
300
mm
TECTOFIN
19
Drainage elements for emergency drainage
DRAINAGE PERFORMANCE PARAPET EMERGENCY DRAIN WITH DAMMING RING AND GRAVEL STOP SD (in l/s)
Material thickness 1.0 mm, height approx. 149 mm (650)/240mm (1,000mm), with Gravel stop SD and four rubber water retention rings in the heights 25, 30, 35 and 40 mm. Available with WOLFIN and universal grey membrane flange.
350 mm
Ø
650
mm1,0
00 m
m
195 mm
72
Drainage capacity: l/s DN 100 Ø 110 mm
Water level in mm with tube as spout
5 0.7 0.7
15 2.3 2.1
25 5.3 4.7
30 10 –
35 15 7.5
42 21 –
45 7.9
Requirement: ≥ 4,50
EXTENSION/DRAINAGE ELEMENT IN COMBINATION WITH DAMMING RING AND GRAVEL STOP SD
Material thickness 0.7 mm with damming ring and Gravel stop SD for emergency drainage.195 mm
72
Drainage capacity: l/s DN 100 Ø 110 mm
Water level in mm with water retention with water retention ring 25 mm ring 35 mm
5 0.7 0.8
10 0.9 1.9
15 1.5 3.5
20 2 8.1
25 5 13
30 8.6 15
35 13 16
40 15 –
45 16 –
Requirement: ≥ 4,50
DAMMING RING FOR EMERGENCY DRAINAGE
With the stainless steel damming ring for WOLFIN drainage elements, an emergency overflow can be created quickly and relia-bly from any extension DN 100.
Simply insert the damming ring into the extension and achieve the necessary water level (25 or 35 mm) for emergency drainage by inserting it in a variable manner.
GRAVEL STOP SD GRAVEL STOP SD FOR EMERGENCY DRAINAGE
Material thickness 1.0 mm
The Gravel stop SD makes a crucial contribution to the safety of the building.
Thanks to the special shape of the Gravel stop, the draina-ge capacity (litres/second) is more than doubled compared with a standard gravel stop.
The safety reserve in the drainage, suitable for all WOLFIN drainage elements.
195 mm
38 mm
195 mm
72 mm
VENTILATION AND DRAINAGE
20
TECTOFIN coated metal sheets
TECTOFIN coated metal sheets consist of 0.6 mm thick pieces of sheet steel sendzimir- galvanised on both sides (275 g/m2), onto which 0.8 mm thick TECTOFIN R in grey or titan grey is laminated using an elaborate process.
The reverse of the TECTOFIN coated metal sheets is also equipped with a coloured, painted pro-tective layer.
Details about the processing of TECTOFIN coated metal sheets can be found in the TECTOFIN installation instructions.
The most important areas of application
Eaves profiles
Ascending components, flashing strips
Skylights, strip lighting
Fixationsat low points of roofs
Fillet fixings and fascia profiles
TECTOFIN coated metal sheets product range
Product Width mm
Length m
Area m²
Sheet grey 1,000 2 m 2 m²
Sheet grey 1,000 3 m 3 m²
Coil grey 1,000 30 m 30 m²
Sheet titan grey 1,000 2 m 2 m²
Formation of a coated metal sheet joint
TECTOFIN
21
Teroson system adhesives for the TECTOFIN system
WOLFIN Bautechnik and HENKEL are linked by a long partnership on the theme of “adhesion to the roof”. This means you benefit from combined ex-pertise relating to both synthetic waterproofing and adhesive development.
All system adhesives are comprehensively tested for your area of application on the roof and specifi-cally on the synthetic roofing and waterproofing membranes.
4c
wolfin.com
wolfin.co.uk
BAUTECHN IK
HKS 65Vollton
4c HKS 65Vollton
BAUTECHN IK
BAUTECHN IK BAUTECHN IK
You can find application videos for the adhesives at www.wolfin.com/products-teroson-en.html.
Teroson EF TK 400Teroson EF TK 400 is a 1-component polyurethane foam for the adhesion of fleece-backed synthetic and elastomer roofing and waterproofing membra-nes and finely sanded bitumen membranes.In the TECTOFIN system, it is used for the strip-ba-sed bonding of TECTOFIN RV and TECTOFIN RV plus.
Teroson AD 914Teroson AD 914 is a transparent contact adhesive and is used to join PVC foils and waterproofing to each other and to metals (raw, phosphated, primed, stove-enamelled, anodised), wood materials, GFRP and card.In the TECTOFIN system, it is used as an adhesivee.g. for parapet.
Teroson AD Adhesive SprayThe Teroson AD adhesive spray in a practical 750 ml pack is used to aid installation and as an adhesive for laminated and non-laminated synthetic and rubber membranes and for PE- and PP-based membranes and foils. It impresses thanks to its high immediate adhesion and its ease of use, and adheres to almost all ma-terials found on a roof. The spray adhesive is also suitable as a primer.
WOLFINATORThe versatile assembly adhesive sets standards in terms of adhesion and possible applications. WOLFINATOR is a sprayable 1-component adhesi-ve that is cured by moisture in the air, and is suitab-le for the efficient adhesion of construction materials indoors and outdoors, e.g. when installing TECTOFIN coated metal sheets. It has high initial adhesion and also achieves its adhesive force without primer.
WOLFIN SYSTEM PARTS
22
The WITEC membrane systemThe right choice in every layer
The innovative WITEC membrane system makes it possible to achieve an almost complete roof layer package in system quality. All layers are optimally coordinated with each other. The WOLFIN WITEC system is tested for wind load in accordance with the UEAtc guidelines, even on wooden supporting structures. The test showed that the WOLFIN roof
layer structure holds securely despite the maximum possible load in a wind tunnel.
No matter whether the WITEC vapour barrier SK, WITEC laminated layer SK or WITEC underlay membrane: you get WOLFIN Bautechnik quality both on top and underneath.
The self-adhesiveWITEC vapour barrier
The all-rounder TECTOFIN RV plus
TECTOFIN
23
WITEC PRODUCT OVERVIEW
Vapour barriers, laminated layers, underlay membranes
Thick-ness Width Length Area/
Roll m2Weight/
m2
WITEC vapour barrier membrane SK Made from a special aluminium polyester composite foil with a cold self-adhesive coating on a bitumen and rubber basis, with a self-adhesive sealing edge and special surface for the adhesion of insulation with Teroson EF TK 395.
1.50 1,000 20 20.00 1.20 kg
WITEC vapour barrier membrane AL-S Elastomer bitumen welding membrane with aluminium inlay, embossed grooves on the underside and additional welding edge on the top: Special surface coating for further adhesion with the insula-ting adhesive Teroson EF TK 395.
3.50 1,000 7,5 7.5 4.98 kg
WITEC vapour barrier membrane SK plus Cold self-adhesive polymer bitumen membrane with aluminium inlay, with safety seam and additional welding edge on the top. Can be nailed directly to wooden surfaces. Suitable for adhesion with Teroson EF TK 395.
3.50 1,080 10 10.80 3.97 kg
WITEC laminated layer SK Made from a bitumen and rubber blend with glass fleece inlay (120 g/m2) and flat PE foil on the top as well as cold self-adhesive coating on a bitumen and rubber basis, surface with a cold self-adhesive- friendly finish.
1.80 1,000 20 20.00 1.70 kg
WITEC underlay membrane Made from a bitumen and rubber blend with glass fabric inlay (200 g/m2) and flat PE foil on the top and bottom, surface with a cold self-adhesive-friendly finish, self-adhesive sealing edge in a longitudinal direction, suitable for use with nails.
1.80 1,000 20 20.00 1.70 kg
WITEC underlay membrane cover strips Cover strips for WITEC underlay membrane for headers, detailing and covers with central fixation.
1.80 165 20 3.30 1.70 kg
WITEC protection fleeces and membranes Width Length Area/ Roll m2
Weight/ m2
WITEC protection fleece 300 g Can be drilled, B2 2,300 50 115.00 0.30 kg
WITEC protection fleece 1,000 g Can be drilled, B2 2,300 30 69.00 1.00 kg
WITEC KV pro 300 g fleece with laminated 80µ PE foil 2,200 50 110.00 0.30 kg
WITEC SL homogeneous protection membrane Anthracite, made from PVC with fleece backing on the reverse (1.0 mm).
2,050 15 30.75 0.92 kg
WITEC Walkway Dark grey membrane for anti-slip maintenance routes, suitable for membranes from the WOLFIN, TECTOFIN and COSMOFIN product range.
1,060 15 15.90 2.50 kg
WITEC MEMBRANE
4c
wolfin.com
wolfin.co.uk
BAUTECHN IK
HKS 65Vollton
4c HKS 65Vollton
BAUTECHN IK
BAUTECHN IK BAUTECHN IK
WBT
0019
_061
8_VU
Installation instructions
TECTOFIN
www.wolfin.co.uk
You can download the TECTOFIN installation instructions here:
WOLFIN Bautechnik GmbH
Am Rosengarten 5
D-63607 Wächtersbach-Neudorf
Telephone: +49 6053 708-0
Fax: +49 6053 708-5130
E-Mail: [email protected]
www.wolfin.com